Add an entry to the sdhci_acpi_uids list to detect the SD card
reader on the Asus X205Ta laptop.
dstd table:
Device (SDHC)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "PNP0FFF") // _HID: Hardware ID
Name (_CID, "PNP0D40" /* SDA Standard Compliant SD Host Controller */)
Name (_DDN, "Intel(R) SD Card Controller - 80860F16") // _DDN: DOS Dev
Name (_UID, 0x03) // _UID: Unique ID
Name (RDEP, Package (0x02)
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here are 3 xhci driver fixes for reported issues for 4.3-rc7
All have been in linux-next for a while with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpLcACgkQMUfUDdst+ylc+QCeKeLrR9st7HlULaq1Nxn5HMUE
nFwAn1rb/bF3IjtsJvY4a6owwIIiqzLD
=Vg7+
-----END PGP SIGNATURE-----
Merge tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are three xhci driver fixes for reported issues for 4.3-rc7
All have been in linux-next for a while with no problems"
* tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Add spurious wakeup quirk for LynxPoint-LP controllers
xhci: handle no ping response error properly
xhci: don't finish a TD if we get a short transfer event mid TD
Here are two fixes that resolve reported issues, one with the 8250
driver, and the other with the generic fbcon driver.
Both have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpWsACgkQMUfUDdst+yn4KgCgh7vFSjdHZa2wgKUz+kIgySRb
CK0An2+SwlC4Z8lQAYGhF2XEBjEcTc2b
=I32U
-----END PGP SIGNATURE-----
Merge tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two fixes that resolve reported issues, one with the 8250
driver, and the other with the generic fbcon driver.
Both have been in linux-next for a while"
* tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: initialize blink interval before calling fb_set_par
Revert "serial: 8250_dma: don't bother DMA with small transfers"
Here are 4 iio driver fixes for 4.3-rc7, fixing some reported issues.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpboACgkQMUfUDdst+ynA4wCdHD56pe0cNCX4yNrcLMlXqVSK
7tUAoIMVLgr3Q8NOWhfGEyKIV5WBDd4U
=bEcI
-----END PGP SIGNATURE-----
Merge tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are four iio driver fixes for 4.3-rc7, fixing some reported
issues. All of these have been in linux-next for a while"
* tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: mxs-lradc: Fix temperature offset
iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb()
iio: st_accel: fix interrupt handling on LIS3LV02
iio: adc: twl4030: Fix ADC[3:6] readings
6 serious fixes:
1) Hold the mutex around the find and corresponding update of our gid
2) The ifa list is rcu protected, copy its contents under rcu to avoid
using a freed structure
3) On error, netdev might be null, so check it before trying to release it
4) On init, if workqueue alloc fails, fail init
5) The new demux patches exposed a bug in mlx5 and ipath drivers, we need
to use the payload P_Key to determine the P_Key the packet arrived on
because the hardware doesn't tell us the truth
6) Due to a couple convoluted error flows, it is possible for the CM to
trigger a use_after_free and a double_free of rb nodes. Add two
checks to prevent that. This code has worked for 10+ years. It is
likely that some of the recent changes have caused this issue to
surface. The current patch will protect us from nasty events for
now while we track down why this is just now showing up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWJ+zYAAoJELgmozMOVy/dpvIP/iDBxRy0tw8jRdJQNF7EUZ5S
a40aXun/J7Ywl6znvWG/WepDriMDe/9n9qIll8ObZtn7VuNlCZhp/7fx0Bn+fVnR
c4j1cIdhWeja7Wg1xI6K75kXzae8hIwn8aombaFwf4NhUH6qkqGMt72Wp0Y9KeIv
d903VyDwEJgETLAgUPaS1STurEuYcQocESvuer66Qp704Q+EhSbYKf9UgiRT6bOm
36ilI5vxtpPeDpI/YT4ubyD2R7r6XPTGRGs3R6/3W6vRaGLNJ6jq4+Fhthx137G2
NoddGmBdxemt2u0hWwLKcMGb5JNFbOoHuOrJmH9AZO6OyIH8XzILeEiXosdRjX/d
U7OC29fE1Ge5wBNwwm+rJx79HgOVyu1vc5AlcE8vbtImIugJT8OzNIbZoAMcm8CB
RUieyn78PGrkZ1KjCbVpiJ7u6S07LBLq/GqPHTnZ7aen3klP3pm8rAfskM7quEvf
UD3kFP3kFQKZ8PG0Q27XtkKixoBU0vie9YgF2ZLBbEfJpJDKT9HF3lr1nP2AjN2a
23FxUMzFCncE2ewA7tXwbHkCY7x5zn/Og0xdbRKdw/q/EvVu9VLZz/eTASLT+we0
v3YZQdkdSnU0rwULZY+26h1PeHba/aoeoN6x/tmlKLQvaCfhkAsoXDl+MGfY4oLk
1f5iWBgn4kseBXg+N/c9
=fpXl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull infiniband fixes from Doug Ledford:
"It's late in the game, I know, but these fixes seemed important enough
to warrant a late pull request. They all involve oopses or use after
frees or corruptions.
Six serious fixes:
- Hold the mutex around the find and corresponding update of our gid
- The ifa list is rcu protected, copy its contents under rcu to avoid
using a freed structure
- On error, netdev might be null, so check it before trying to
release it
- On init, if workqueue alloc fails, fail init
- The new demux patches exposed a bug in mlx5 and ipath drivers, we
need to use the payload P_Key to determine the P_Key the packet
arrived on because the hardware doesn't tell us the truth
- Due to a couple convoluted error flows, it is possible for the CM
to trigger a use_after_free and a double_free of rb nodes. Add two
checks to prevent that. This code has worked for 10+ years. It is
likely that some of the recent changes have caused this issue to
surface. The current patch will protect us from nasty events for
now while we track down why this is just now showing up"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/cm: Fix rb-tree duplicate free and use-after-free
IB/cma: Use inner P_Key to determine netdev
IB/ucma: check workqueue allocation before usage
IB/cma: Potential NULL dereference in cma_id_from_event
IB/core: Fix use after free of ifa
IB/core: Fix memory corruption in ib_cache_gid_set_default_gid
properly store flags in DM cache metadata's superblock).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKneZAAoJEMUj8QotnQNahVIIAKNJ5kkOLTtlZqKeio0b6DmE
utvbNIbcesuBkg4rA67kDBgrTpxFiwaIyC5CBc9dEKzjJY9L+gJ59nXbLWKKu9N1
qBQOlnuYx/fdREDe00HObwZ7Fiw9ofBU71hdrZsHtntHHULEOBqFvnynglZA33Nb
vtBiupwO84uMY9eQdBhZudIb+F3PFF5uBkLfwlhaDmCugUdA9bivz0/P+7x6/Lt5
R25+3D0gF2gXU060An2ZBJaenkSMPYBoWGtpK6TJkQzlNMODc8y9opt0hsEwIJT8
A7TsJRXkjWPPA+DlVlqUd3yWpMKlBaC8o+TB1HvpfGqqCxiZQm7PgxNX8d/yd+E=
=7+lz
-----END PGP SIGNATURE-----
Merge tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Three stable fixes (two in btree code used by DM thinp and one to
properly store flags in DM cache metadata's superblock)"
* tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: the CLEAN_SHUTDOWN flag was not being set
dm btree: fix leak of bufio-backed block in btree_split_beneath error path
dm btree remove: fix a bug when rebalancing nodes after removal
Pull block layer fixes from Jens Axboe:
"A final set of fixes for 4.3.
It is (again) bigger than I would have liked, but it's all been
through the testing mill and has been carefully reviewed by multiple
parties. Each fix is either a regression fix for this cycle, or is
marked stable. You can scold me at KS. The pull request contains:
- Three simple fixes for NVMe, fixing regressions since 4.3. From
Arnd, Christoph, and Keith.
- A single xen-blkfront fix from Cathy, fixing a NULL dereference if
an error is returned through the staste change callback.
- Fixup for some bad/sloppy code in nbd that got introduced earlier
in this cycle. From Markus Pargmann.
- A blk-mq tagset use-after-free fix from Junichi.
- A backing device lifetime fix from Tejun, fixing a crash.
- And finally, a set of regression/stable fixes for cgroup writeback
from Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy()
NVMe: Fix memory leak on retried commands
block: don't release bdi while request_queue has live references
nvme: use an integer value to Linux errno values
blk-mq: fix use-after-free in blk_mq_free_tag_set()
nvme: fix 32-bit build warning
writeback: fix incorrect calculation of available memory for memcg domains
writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions
writeback: bdi_writeback iteration must not skip dying ones
writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback()
writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration
nbd: Add locking for tasks
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
Pull Ceph fixes from Sage Weil:
"Two fixes.
One is a stopgap to prevent a stack blowout when users have a deep
chain of image clones. (We'll rewrite this code to be non-recursive
for the next window, but in the meantime this is a simple fix that
avoids a crash.)
The second fixes a refcount underflow"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: prevent kernel stack blow up on rbd map
rbd: don't leak parent_spec in rbd_dev_probe_parent()
Pull btrfs fixes from Chris Mason:
"I have two more small fixes this week:
Qu's fix avoids unneeded COW during fallocate, and Christian found a
memory leak in the error handling of an earlier fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix possible leak in btrfs_ioctl_balance()
btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
If the CLEAN_SHUTDOWN flag is not set when a cache is loaded then all cache
blocks are marked as dirty and a full writeback occurs.
__commit_transaction() is responsible for setting/clearing
CLEAN_SHUTDOWN (based the flags_mutator that is passed in).
Fix this issue, of the cache's on-disk flags being wrong, by making sure
__commit_transaction() does not reset the flags after the mutator has
altered the flags in preparation for them being serialized to disk.
before:
sb_flags = mutator(le32_to_cpu(disk_super->flags));
disk_super->flags = cpu_to_le32(sb_flags);
disk_super->flags = cpu_to_le32(cmd->flags);
after:
disk_super->flags = cpu_to_le32(cmd->flags);
sb_flags = mutator(le32_to_cpu(disk_super->flags));
disk_super->flags = cpu_to_le32(sb_flags);
Reported-by: Bogdan Vasiliev <bogdan.vasiliev@gmail.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
btree_split_beneath()'s error path had an outstanding FIXME that speaks
directly to the potential for _not_ cleaning up a previously allocated
bufio-backed block.
Fix this by releasing the previously allocated bufio block using
unlock_block().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Cc: stable@vger.kernel.org
Commit 4c7e309340 ("dm btree remove: fix bug in redistribute3") wasn't
a complete fix for redistribute3().
The redistribute3 function takes 3 btree nodes and shares out the entries
evenly between them. If the three nodes in total contained
(MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting
rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in
the center.
Fix this issue by being more careful about calculating the target number
of entries for the left and right nodes.
Unit tested in userspace using this program:
https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Mapping an image with a long parent chain (e.g. image foo, whose parent
is bar, whose parent is baz, etc) currently leads to a kernel stack
overflow, due to the following recursion in the reply path:
rbd_osd_req_callback()
rbd_obj_request_complete()
rbd_img_obj_callback()
rbd_img_parent_read_callback()
rbd_obj_request_complete()
...
Limit the parent chain to 16 images, which is ~5K worth of stack. When
the above recursion is eliminated, this limit can be lifted.
Fixes: http://tracker.ceph.com/issues/12538
Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Currently we leak parent_spec and trigger a "parent reference
underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails.
The problem is we take the !parent out_err branch and that only drops
refcounts; parent_spec that would've been freed had we called
rbd_dev_unparent() remains and triggers rbd_warn() in
rbd_dev_parent_put() - at that point we have parent_spec != NULL and
parent_ref == 0, so counter ends up being -1 after the decrement.
Redo rbd_dev_probe_parent() to fix this.
Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 4.2
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: two KASAN fixes, two EFI boot fixes, two boot-delay
optimization fixes, and a fix for a IRQ handling hang observed on
virtual platforms"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm, kasan: Silence KASAN warnings in get_wchan()
compiler, atomics, kasan: Provide READ_ONCE_NOCHECK()
x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernels
x86/smpboot: Fix CPU #1 boot timeout
x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior
x86/ioapic: Disable interrupts when re-routing legacy IRQs
x86/setup: Extend low identity map to cover whole kernel range
x86/efi: Fix multiple GOP device support
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all around the map: an instrumentation fix, a nohz
usability fix, a lockdep annotation fix and two task group scheduling
fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Add missing lockdep_unpin() annotations
sched/deadline: Fix migration of SCHED_DEADLINE tasks
nohz: Revert "nohz: Set isolcpus when nohz_full is set"
sched/fair: Update task group's load_avg after task migration
sched/fair: Fix overly small weight for interactive group entities
sched, tracing: Stop/start critical timings around the idle=poll idle loop
Merge fixes from Andrew Morton:
"9 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2/dlm: unlock lockres spinlock before dlm_lockres_put
fault-inject: fix inverted interval/probability values in printk
lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y
mm: make sendfile(2) killable
thp: use is_zero_pfn() only after pte_present() check
mailmap: update Javier Martinez Canillas' email
MAINTAINERS: add Sergey as zsmalloc reviewer
mm: cma: fix incorrect type conversion for size during dma allocation
kmod: don't run async usermode helper as a child of kworker thread
- Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8" from Paul
- Handle irq_happened flag correctly in off-line loop from Paul
- Validate rtas.entry before calling enter_rtas() from Vasant
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K7eA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on
POWER8" from Paul
- Handle irq_happened flag correctly in off-line loop from Paul
- Validate rtas.entry before calling enter_rtas() from Vasant
* tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Validate rtas.entry before calling enter_rtas()
powerpc/powernv: Handle irq_happened flag correctly in off-line loop
powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8"
Most of the changes this time are for incorrect device nodes in various
ways, on on imx, berlin, exynos, ux500, uniphier, omap and meson.
Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).
Other bug fixes include
* a partial revert of a broken tegra gpio patch
* irq affinity for arm ccn
* suspend on one Armada 385 machine
* enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
* turning on a regulator on beagleboard-x15 for HDMI
* making the omap gpmc debug code visible
* setup of orion network switch
* a rare build regression for pxa
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3g0Z
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for incorrect device nodes in
various ways, on on imx, berlin, exynos, ux500, uniphier, omap and
meson.
Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).
Other bug fixes include
- a partial revert of a broken tegra gpio patch
- irq affinity for arm ccn
- suspend on one Armada 385 machine
- enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
- turning on a regulator on beagleboard-x15 for HDMI
- making the omap gpmc debug code visible
- setup of orion network switch
- a rare build regression for pxa"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
thermal: exynos: Fix register read in TMU
ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
ARM: tegra: Comment out gpio-ranges properties
ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
drivers/perf: arm_pmu: avoid CPU device_node reference leak
bus: arm-ccn: Fix irq affinity setting on CPU migration
bus: arm-ccn: Handle correctly no-more-cpus case
ARM: mvebu: correct a385-db-ap compatible string
ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
MAINTAINERS: Update Allwinner entry and add new maintainer
ARM: ux500: modify initial levelshifter status
ARM: pxa: fix pxa3xx DFI lockup hack
Documentation: ARM: List new omap MMC requirements
memory: omap-gpmc: dump "before" state before first modification
memory: omap-gpmc: Fix unselectable debug option for GPMC
ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
ARM: dts: Fix audio card detection on Peach boards
ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
ARM: orion: Fix DSA platform device after mvmdio conversion
...
of warnings. It was caused by the stack tracer triggering a warning
about using rcu_dereference() when RCU was not watching. This can happen
due to the fact that the stack tracer uses the function tracer to check
each function, and there's functions that may be called and traced
when RCU stopped watching. Namely when a function is called just before
going idle or to userspace and after RCU stopped watching that current
CPU.
The first patch makes sure that RCU is watching when the stack tracer
uses RCU. The second patch is to make sure that the stack tracer does
not get called by functions in NMI, as it's not NMI safe.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKOJaAAoJEEjnJuOKh9ldQsIH/RljIDrkq/RRr22TQZIFafrY
q9ZwWrEOiVetdANhN1SUJEnEHHDw/17c77r2bLcBvb1L97sRU+1PF5mATkYy7dUL
4B9/3kOydMwU9boDe7ObsjUO2YH51eMCUR15dPYvxqb5w3EZQXMucZnT93nHVPZZ
0OTEzIZmNczfJTnmzdMWggmE9Wgdj0LXLMi+H+OqDfAw2YnyqvvehdipePiyCxVj
9XPVuv0fbjFbCgzTi50NPD9xXCPgLDxowsh0Hoym0DGdvDPj21EuI4l6DWwOIe+D
KKm2X1y7b10hnBVnHeMjugaf8W4sztW7WitgujnUucscEVUy0lp72y0m+kNLRhc=
=L+k7
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Running tests on other changes, the system locked up due to lots of
warnings. It was caused by the stack tracer triggering a warning
about using rcu_dereference() when RCU was not watching. This can
happen due to the fact that the stack tracer uses the function tracer
to check each function, and there are functions that may be called and
traced when RCU stopped watching. Namely when a function is called
just before going idle or to userspace and after RCU stopped watching
that current CPU.
The first patch makes sure that RCU is watching when the stack tracer
uses RCU. The second patch is to make sure that the stack tracer does
not get called by functions in NMI, as it's not NMI safe"
* tag 'trace-fixes-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not allow stack_tracer to record stack in NMI
tracing: Have stack tracer force RCU to be watching
There is nothing to worry you much, only a few small & stable patches
are found for usual stuff, HD-audio (a Lenovo laptop quirk, a fix for
minor error handling) and ASoC (trivial fixes for RT298 and WM
codecs). The only remaining major change is the fix for ASoC SX_TLV
control that was overseen during refactoring, but the fix itself is
trivial and safe.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJWKd1hAAoJEGwxgFQ9KSmkeAQP/iiF8JXyaCnwh860DK697PYK
FSrVgxfRHjzhTUR18IugfUJV35TEq7h+MqiWCaeHESxrDAZzR1bH/fRdg0MxKLDg
28MTn3XGgIzxqHN3OeI9DQ3GQfLv+xeJnGhYjGtyVYNCINQSd02taTxo4ec/cA1N
Nr8QQQPeBw8RkxLJ8Vmk0Oeo7Ew2vdzecyA07d0//EJqMnyxF/k+4zfoi8K8+DXc
6h/IBrwDfOPvlXVReIYCGedWHBDRjvipLD/1c3DYJq4X05JKgyLoo6ksJWu229Vw
tuzo7a6q41z8pWV/BhTyrg5tmcF0BcOhNnnJwW2QpfIlcwsgR6zcRq4j14fSStEk
zPaN1RH3rTRfDd2kVN2PtEXBPqYCIoSkyRB3jhWuf3OhAUtBEoSAY55qvGPJ/fhq
HZjO13wurnvaJ1d43DxWai4dWY7lIr8J9TCo1LU/MsvRbNfw99g6dUkfI/UMOPM7
t1Fa8DkKMiZyW5qLxW64bIh+5Exb8yFiSHbJNt7Qzk+YceivG2MDGNf/MZ7gptec
59E7FSywhS20bDG4bRw/2ypU3H8PktpE/QNirb3aVIV6Bq+PwlSeZqZskIokop0k
ievsCi0ENyeEtB59kUK73PfbpLdTQNBY1t1wTTLVruDjEVpjVcfTayGlaudu/Ukp
Kk8pHHL5JitDFPsD9A4m
=s57z
-----END PGP SIGNATURE-----
Merge tag 'sound-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is nothing to worry you much, only a few small & stable patches
are found for usual stuff, HD-audio (a Lenovo laptop quirk, a fix for
minor error handling) and ASoC (trivial fixes for RT298 and WM
codecs).
The only remaining major change is the fix for ASoC SX_TLV control
that was overseen during refactoring, but the fix itself is trivial
and safe"
* tag 'sound-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: mark cache_dirty flag after software reset in pm_resume
ASoC: rt298: fix wrong setting of gpio2_en
ASoC: wm8904: Correct number of EQ registers
ALSA: hda - Fix deadlock at error in building PCM
ASoC: Add info callback for SX_TLV controls
ASoC: rt298: correct index default value
ALSA: hda - Fix inverted internal mic on Lenovo G50-80
ALSA: hdac: Explicitly add io.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RlDF
-----END PGP SIGNATURE-----
Merge tag 'media/v4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some regression fixes and potential security issues:
- netup_unidvb: fix potential crash when spi is NULL
- rtl28xxu: fix control message flaws
- m88ds3103: fix a regression on Kernel 4.2
- c8sectpfe: fix some issues on this new driver
- v4l2-flash-led-class: fix a Kbuild dependency
- si2157 and si2158: check for array boundary when uploading firmware
files
- horus3a and lnbh25: fix some building troubles when some options
aren't selected
- ir-hix5hd2: drop the use of IRQF_NO_SUSPEND"
* tag 'media/v4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] m88ds3103: use own reg update_bits() implementation
[media] rtl28xxu: fix control message flaws
[media] v4l2-flash-led-class: Add missing VIDEO_V4L2 Kconfig dependency
[media] netup_unidvb: fix potential crash when spi is NULL
[media] si2168: Bounds check firmware
[media] si2157: Bounds check firmware
[media] ir-hix5hd2: drop the use of IRQF_NO_SUSPEND
[media] c8sectpfe: fix return of garbage
[media] c8sectpfe: fix ininitialized error return on firmware load failure
[media] lnbh25: Fix lnbh25_attach() function return type
[media] horus3a: Fix horus3a_attach() function parameters
Pull drm fixes from Dave Airlie:
"I've been a bit slow gathering these:
- drm/mst: one mutex leak in a fail path
- radeon: two oops fixes, one dpm fix
- i915: one messy set of fixes, where we revert the original fix, and
pull back the proper set of fixes from -next on top.
- nouveau: one fix for an illegal buffer placement.
Doesn't look too bad, hopefully shouldn't be too much more"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gem: return only valid domain when there's only one
drm: fix mutex leak in drm_dp_get_mst_branch_device
drm/amdgpu: add missing dpm check for KV dpm late init
drm/amdgpu/dpm: don't add pwm attributes if DPM is disabled
drm/radeon/dpm: don't add pwm attributes if DPM is disabled
drm/i915: Add primary plane to mask if it's visible
drm/i915: Move sprite/cursor plane disable to intel_sanitize_crtc()
drm/i915: Assign hwmode after encoder state readout
Revert "drm/i915: Add primary plane to mask if it's visible"
drm/i915: Deny wrapping an userptr into a framebuffer
drm/i915: Enable DPLL VGA mode before P1/P2 divider write
drm/i915: Restore lost DPLL register write on gen2-4
drm/i915: Flush pipecontrol post-sync writes
drm/i915: Fix kerneldoc for i915_gem_shrink_all
dlm_lockres_put will call dlm_lockres_release if it is the last
reference, and then it may call dlm_print_one_lock_resource and
take lockres spinlock.
So unlock lockres spinlock before dlm_lockres_put to avoid deadlock.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the kernel compiled with KASAN=y, GCC adds redzones for each
variable on stack. This enlarges function's stack frame and causes:
'warning: the frame size of X bytes is larger than Y bytes'
The worst case I've seen for now is following:
../net/wireless/nl80211.c: In function `nl80211_send_wiphy':
../net/wireless/nl80211.c:1731:1: warning: the frame size of 5448 bytes is larger than 2048 bytes [-Wframe-larger-than=]
That kind of warning becomes useless with KASAN=y. It doesn't
necessarily indicate that there is some problem in the code, thus we
should turn it off.
(The KASAN=y stack size in increased from 16k to 32k for this reason)
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently a simple program below issues a sendfile(2) system call which
takes about 62 days to complete in my test KVM instance.
int fd;
off_t off = 0;
fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644);
ftruncate(fd, 2);
lseek(fd, 0, SEEK_END);
sendfile(fd, fd, &off, 0xfffffff);
Now you should not ask kernel to do a stupid stuff like copying 256MB in
2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin
should have a way to stop you.
We actually do have a check for fatal_signal_pending() in
generic_perform_write() which triggers in this path however because we
always succeed in writing something before the check is done, we return
value > 0 from generic_perform_write() and thus the information about
signal gets lost.
Fix the problem by doing the signal check before writing anything. That
way generic_perform_write() returns -EINTR, the error gets propagated up
and the sendfile loop terminates early.
Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use is_zero_pfn() on pteval only after pte_present() check on pteval
(It might be better idea to introduce is_zero_pte() which checks
pte_present() first).
Otherwise when working on a swap or migration entry and if pte_pfn's
result is equal to zero_pfn by chance, we lose user's data in
__collapse_huge_page_copy(). So if you're unlucky, the application
segfaults and finally you could see below message on exit:
BUG: Bad rss-counter state mm:ffff88007f099300 idx:2 val:3
Fixes: ca0984caa8 ("mm: incorporate zero pages into transparent huge pages")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_maintainer script still reports my old Collabora email based on
old commits but that address no longer exist so update mailmap to report
my current email and avoid people sending to the old address.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was found during userspace fuzzing test when a large size dma cma
allocation is made by driver(like ion) through userspace.
show_stack+0x10/0x1c
dump_stack+0x74/0xc8
kasan_report_error+0x2b0/0x408
kasan_report+0x34/0x40
__asan_storeN+0x15c/0x168
memset+0x20/0x44
__dma_alloc_coherent+0x114/0x18c
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
call_usermodehelper_exec_sync() does fork() + wait() with "unignored"
SIGCHLD. What we have missed is that this worker thread can have other
children previously forked by call_usermodehelper_exec_work() without
UMH_WAIT_PROC. If such a child exits in between it becomes a zombie
because auto-reaping only works if SIGCHLD is ignored, and nobody can
reap it (unless/until this worker thread exits too).
Change the !UMH_WAIT_PROC case to use CLONE_PARENT.
Note: this is only first step. All PF_KTHREAD tasks, even created by
kernel_thread() should have ->parent == kthreadd by default.
Fixes: bb304a5c6f ("kmod: handle UMH_WAIT_PROC from system unbound workqueue")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bunch of driver fixes plus one core fix which fixes problems with
misreporting values from _SX controls following a recent refactoring.
This had gone unnoticed as such controls are quite rare.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKXWMAAoJECTWi3JdVIfQxesH/jqmFbLuG3QVVw3yqYXuje2B
nhl/eL8Fnre7MQR2iIJitJBa4CTKZReYmBR/Etzqh/PWkJLPOtFXXYDu/qTCKUxn
eF4P2J8jXL0vyJaRVbglYT+G0iidYFyRheKnAz8NtHFyDap8TwroBNe15pxVsqc2
A14M9bJJ34L1zrLFKJnT8k2Imq26WXqAZllU9evJVqJkvBZuDoBBb0pDx3DZfwCC
IF5YddD/2ojoK3ZvQLfVBqk8MjmjQUD76lyHXHCII4tK5hQyYrw731YdVIk5zDNn
syK1T79fNJ0q3QjQJer7pxU8r3WKVUea/ev4QxU+Vr+Uz2gmRcKLea+3Gu5eqb4=
=KU55
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.3
A bunch of driver fixes plus one core fix which fixes problems with
misreporting values from _SX controls following a recent refactoring.
This had gone unnoticed as such controls are quite rare.
Device stopped to tuning some channels after regmap conversion.
Reason is that regmap_update_bits() works a bit differently for
partially volatile registers than old homemade routine. Return
back to old routine in order to fix issue.
Fixes: 478932b160
Cc: <stable@kernel.org> # 4.2+
Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add lock to prevent concurrent access for control message as control
message function uses shared buffer. Without the lock there may be
remote control polling which messes the buffer causing IO errors.
Increase buffer size and add check for maximum supported message
length.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391
Fixes: c56222a6b2 ("[media] rtl28xxu: move usb buffers to state")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Fixes the following randconfig problem:
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x12204f): undefined reference to `v4l2_async_unregister_subdev'
drivers/built-in.o: In function `v4l2_flash_release':
(.text+0x122057): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_close':
v4l2-flash-led-class.c:(.text+0x12208f): undefined reference to `v4l2_fh_is_singular'
v4l2-flash-led-class.c:(.text+0x1220c8): undefined reference to `__v4l2_ctrl_s_ctrl'
drivers/built-in.o: In function `v4l2_flash_open':
v4l2-flash-led-class.c:(.text+0x12227f): undefined reference to `v4l2_fh_is_singular'
drivers/built-in.o: In function `v4l2_flash_init_controls':
v4l2-flash-led-class.c:(.text+0x12274e): undefined reference to `v4l2_ctrl_handler_init_class'
v4l2-flash-led-class.c:(.text+0x122797): undefined reference to `v4l2_ctrl_new_std_menu'
v4l2-flash-led-class.c:(.text+0x1227e0): undefined reference to `v4l2_ctrl_new_std'
v4l2-flash-led-class.c:(.text+0x122826): undefined reference to `v4l2_ctrl_handler_setup'
v4l2-flash-led-class.c:(.text+0x122839): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x1228e2): undefined reference to `v4l2_subdev_init'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x12293b): undefined reference to `v4l2_async_register_subdev'
drivers/built-in.o: In function `v4l2_flash_init':
(.text+0x122949): undefined reference to `v4l2_ctrl_handler_free'
drivers/built-in.o:(.rodata+0x20ef8): undefined reference to `v4l2_subdev_queryctrl'
drivers/built-in.o:(.rodata+0x20f10): undefined reference to `v4l2_subdev_querymenu'
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
When reading the firmware and sending commands, the length must
be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the expected
format:
si2168 11-0064: found a 'Silicon Labs Si2168-B40'
si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 11-0064: firmware download failed -95
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f
Add the proper check.
Cc: stable@kernel.org
Reported-by: Stuart Auchterlonie <sauchter@redhat.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When reading the firmware and sending commands, the length
must be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the
expected format. Add the proper check.
Cc: stable@kernel.org
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver doesn't claim the IR transmitter to be wakeup source. It
even disables the clock and the IR during suspend-resume cycle.
This patch removes yet another misuse of IRQF_NO_SUSPEND.
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Guoxiong Yan <yanguoxiong@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The variable err was never initialized, that means we had been checking
a garbage value in the for loop. Moreover if the segment is not outside
the firmware file then also we have been returning the garbage.
Initialize it to 0 so that on success we return the value and no need to
check in the for loop also as it is initially 0 and whenever that value
changes we have done a break from the loop.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
static analysis with cppcheck detected the following error:
[drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1210]:
(error) Uninitialized variable: ret
ret is never initialised, so garbage is being returned. Instead
return the error return from the call of request_firmware_nowait
Signed-off-by: Colin Ian King <colin.king@canonical.com>
If CONFIG_DVB_LNBH25 is disabled, a stub static inline function is
defined that just prints a warning about the driver being disabled
but the function return type was wrong which caused a build error.
Fixes: e025273b86 ("[media] lnbh25: LNBH25 SEC controller driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
If CONFIG_DVB_HORUS3A is disabled a stub static inline function is
defined that just prints a warning about the driver being disabled
but the function parameters were wrong which caused a build error.
Fixes: a5d32b3582 ("[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
By doing software reset of wm8962 in pm_resume, all registers which
have already been set will be reset to default value without regmap
interface be involved, thus driver need to mark cache_dirty flag,
to let regcache can be updated by regcache_sync().
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Michele Curti