Commit Graph

1103 Commits

Author SHA1 Message Date
Linus Torvalds 168829ad09 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - A comprehensive rewrite of the robust/PI futex code's exit handling
     to fix various exit races. (Thomas Gleixner et al)

   - Rework the generic REFCOUNT_FULL implementation using
     atomic_fetch_* operations so that the performance impact of the
     cmpxchg() loops is mitigated for common refcount operations.

     With these performance improvements the generic implementation of
     refcount_t should be good enough for everybody - and this got
     confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
     REFCOUNT_FULL entirely, leaving the generic implementation enabled
     unconditionally. (Will Deacon)

   - Other misc changes, fixes, cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  lkdtm: Remove references to CONFIG_REFCOUNT_FULL
  locking/refcount: Remove unused 'refcount_error_report()' function
  locking/refcount: Consolidate implementations of refcount_t
  locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
  locking/refcount: Move saturation warnings out of line
  locking/refcount: Improve performance of generic REFCOUNT_FULL code
  locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
  locking/refcount: Remove unused refcount_*_checked() variants
  locking/refcount: Ensure integer operands are treated as signed
  locking/refcount: Define constants for saturation and max refcount values
  futex: Prevent exit livelock
  futex: Provide distinct return value when owner is exiting
  futex: Add mutex around futex exit
  futex: Provide state handling for exec() as well
  futex: Sanitize exit state handling
  futex: Mark the begin of futex exit explicitly
  futex: Set task::futex_state to DEAD right after handling futex exit
  futex: Split futex_mm_release() for exit/exec
  exit/exec: Seperate mm_release()
  futex: Replace PF_EXITPIDONE with a state
  ...
2019-11-26 16:02:40 -08:00
Linus Torvalds 77a05940ee Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The biggest changes in this cycle were:

   - Make kcpustat vtime aware (Frederic Weisbecker)

   - Rework the CFS load_balance() logic (Vincent Guittot)

   - Misc cleanups, smaller enhancements, fixes.

  The load-balancing rework is the most intrusive change: it replaces
  the old heuristics that have become less meaningful after the
  introduction of the PELT metrics, with a grounds-up load-balancing
  algorithm.

  As such it's not really an iterative series, but replaces the old
  load-balancing logic with the new one. We hope there are no
  performance regressions left - but statistically it's highly probable
  that there *is* going to be some workload that is hurting from these
  chnages. If so then we'd prefer to have a look at that workload and
  fix its scheduling, instead of reverting the changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  rackmeter: Use vtime aware kcpustat accessor
  leds: Use all-in-one vtime aware kcpustat accessor
  cpufreq: Use vtime aware kcpustat accessors for user time
  procfs: Use all-in-one vtime aware kcpustat accessor
  sched/vtime: Bring up complete kcpustat accessor
  sched/cputime: Support other fields on kcpustat_field()
  sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
  sched/fair: Add comments for group_type and balancing at SD_NUMA level
  sched/fair: Fix rework of find_idlest_group()
  sched/uclamp: Fix overzealous type replacement
  sched/Kconfig: Fix spelling mistake in user-visible help text
  sched/core: Further clarify sched_class::set_next_task()
  sched/fair: Use mul_u32_u32()
  sched/core: Simplify sched_class::pick_next_task()
  sched/core: Optimize pick_next_task()
  sched/core: Make pick_next_task_idle() more consistent
  sched/fair: Better document newidle_balance()
  leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
  ...
2019-11-26 15:23:14 -08:00
Linus Torvalds fb4b3d3fd0 for-5.5/io_uring-20191121
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WxNwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgps4kD/9SIDXhYhhE8fNqeAF7Uouu8fxgwnkY3hSI
 43vJwCziiDxWWJH5mYW7/83VNOMZKHIbiYMnU6iEUsRQ/sG/wI0wEfAQZDHLzCKt
 cko2q7zAC1/4rtoslwJ3q04hE2Ap/nb93ELZBVr7fOAuODBNFUp/vifAojvsMPKz
 hNMNPq/vYg7c/iYMZKSBdtjE3tqceFNBjAVNMB9dHKQLeexEy4ve7AjBeawWsSi7
 GesnQ5w5u5LqkMYwLslpv/oVjHiiFWgGnDAvBNvykQvVy+DfB54KSqMV11W1aqdU
 l6L+ENfZasEvlk1yMAth2Foq4vlscm5MKEb6VdJhXWHHXtXkcBmz7RBqPmjSvXCY
 wS5GZRw8oYtTcid0aQf+t/wgRNTDJsGsnsT32qto41No3Z7vlIDHUDxHZGTA+gEL
 E8j9rDx6EXMTo3EFbC8XZcfsorhPJ1HKAyw1YFczHtYzJEQUR9jJe3f/Q9u6K2Vy
 s/EhkVeHa/lEd7kb6mI+6lQjGe1FXl7AHauDuaaEfIOZA/xJB3Bad5Wjq1va1cUO
 TX+37zjzFzJghhSIBGYq7G7iT4AMecPQgxHzCdCyYfW5S4Uur9tMmIElwVPI/Pjl
 kDZ9gdg9lm6JifZ9Ab8QcGhuQQTF3frwX9VfgrVgcqyvm38AiYzVgL9ZJnxRS/Cy
 ZfLNkACXqQ==
 =YZ9s
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block

Pull io_uring updates from Jens Axboe:
 "A lot of stuff has been going on this cycle, with improving the
  support for networked IO (and hence unbounded request completion
  times) being one of the major themes. There's been a set of fixes done
  this week, I'll send those out as well once we're certain we're fully
  happy with them.

  This contains:

   - Unification of the "normal" submit path and the SQPOLL path (Pavel)

   - Support for sparse (and bigger) file sets, and updating of those
     file sets without needing to unregister/register again.

   - Independently sized CQ ring, instead of just making it always 2x
     the SQ ring size. This makes it more flexible for networked
     applications.

   - Support for overflowed CQ ring, never dropping events but providing
     backpressure on submits.

   - Add support for absolute timeouts, not just relative ones.

   - Support for generic cancellations. This divorces io_uring from
     workqueues as well, which additionally gets us one step closer to
     generic async system call support.

   - With cancellations, we can support grabbing the process file table
     as well, just like we do mm context. This allows support for system
     calls that create file descriptors, like accept4() support that's
     built on top of that.

   - Support for io_uring tracing (Dmitrii)

   - Support for linked timeouts. These abort an operation if it isn't
     completed by the time noted in the linke timeout.

   - Speedup tracking of poll requests

   - Various cleanups making the coder easier to follow (Jackie, Pavel,
     Bob, YueHaibing, me)

   - Update MAINTAINERS with new io_uring list"

* tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits)
  io_uring: make POLL_ADD/POLL_REMOVE scale better
  io-wq: remove now redundant struct io_wq_nulls_list
  io_uring: Fix getting file for non-fd opcodes
  io_uring: introduce req_need_defer()
  io_uring: clean up io_uring_cancel_files()
  io-wq: ensure free/busy list browsing see all items
  io-wq: ensure we have a stable view of ->cur_work for cancellations
  io_wq: add get/put_work handlers to io_wq_create()
  io_uring: check for validity of ->rings in teardown
  io_uring: fix potential deadlock in io_poll_wake()
  io_uring: use correct "is IO worker" helper
  io_uring: fix -ENOENT issue with linked timer with short timeout
  io_uring: don't do flush cancel under inflight_lock
  io_uring: flag SQPOLL busy condition to userspace
  io_uring: make ASYNC_CANCEL work with poll and timeout
  io_uring: provide fallback request for OOM situations
  io_uring: convert accept4() -ERESTARTSYS into -EINTR
  io_uring: fix error clear of ->file_table in io_sqe_files_register()
  io_uring: separate the io_free_req and io_free_req_find_next interface
  io_uring: keep io_put_req only responsible for release and put req
  ...
2019-11-25 10:40:27 -08:00
Ingo Molnar b21feab0b8 Linux 5.4-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl3RzgkeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGN18H/0JZbfIpy8/4Irol
 0va7Aj2fBi1a5oxfqYsMKN0u3GKbN3OV9tQ+7w1eBNGvL72TGadgVTzTY+Im7A9U
 UjboAc7jDPCG+YhIwXFufMiIAq5jDIj6h0LDas7ALsMfsnI/RhTwgNtLTAkyI3dH
 YV/6ljFULwueJHCxzmrYbd1x39PScj3kCNL2pOe6On7rXMKOemY/nbbYYISxY30E
 GMgKApSS+li7VuSqgrKoq5Qaox26LyR2wrXB1ij4pqEJ9xgbnKRLdHuvXZnE+/5p
 46EMirt+yeSkltW3d2/9MoCHaA76ESzWMMDijLx7tPgoTc3RB3/3ZLsm3rYVH+cR
 cRlNNSk=
 =0+Cg
 -----END PGP SIGNATURE-----

Merge tag 'v5.4-rc8' into sched/core, to pick up fixes and dependencies

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-18 14:41:02 +01:00
Valentin Schneider 7763baace1 sched/uclamp: Fix overzealous type replacement
Some uclamp helpers had their return type changed from 'unsigned int' to
'enum uclamp_id' by commit

  0413d7f33e ("sched/uclamp: Always use 'enum uclamp_id' for clamp_id values")

but it happens that some do return a value in the [0, SCHED_CAPACITY_SCALE]
range, which should really be unsigned int. The affected helpers are
uclamp_none(), uclamp_rq_max_value() and uclamp_eff_value(). Fix those up.

Note that this doesn't lead to any obj diff using a relatively recent
aarch64 compiler (8.3-2019.03). The current code of e.g. uclamp_eff_value()
properly returns an 11 bit value (bits_per(1024)) and doesn't seem to do
anything funny. I'm still marking this as fixing the above commit to be on
the safe side.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: patrick.bellasi@matbug.net
Cc: qperret@google.com
Cc: surenb@google.com
Cc: tj@kernel.org
Fixes: 0413d7f33e ("sched/uclamp: Always use 'enum uclamp_id' for clamp_id values")
Link: https://lkml.kernel.org/r/20191115103908.27610-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-17 10:46:05 +01:00
Qais Yousef 6e1ff0773f sched/uclamp: Fix incorrect condition
uclamp_update_active() should perform the update when
p->uclamp[clamp_id].active is true. But when the logic was inverted in
[1], the if condition wasn't inverted correctly too.

[1] https://lore.kernel.org/lkml/20190902073836.GO2369@hirez.programming.kicks-ass.net/

Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Link: https://lkml.kernel.org/r/20191114211052.15116-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-15 11:02:18 +01:00
Peter Zijlstra ff51ff84d8 sched/core: Avoid spurious lock dependencies
While seemingly harmless, __sched_fork() does hrtimer_init(), which,
when DEBUG_OBJETS, can end up doing allocations.

This then results in the following lock order:

  rq->lock
    zone->lock.rlock
      batched_entropy_u64.lock

Which in turn causes deadlocks when we do wakeups while holding that
batched_entropy lock -- as the random code does.

Solve this by moving __sched_fork() out from under rq->lock. This is
safe because nothing there relies on rq->lock, as also evident from the
other __sched_fork() callsite.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: bigeasy@linutronix.de
Cc: cl@linux.com
Cc: keescook@chromium.org
Cc: penberg@kernel.org
Cc: rientjes@google.com
Cc: thgarnie@google.com
Cc: tytso@mit.edu
Cc: will@kernel.org
Fixes: b7d5dc2107 ("random: add a spinlock_t to struct batched_entropy")
Link: https://lkml.kernel.org/r/20191001091837.GK4536@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13 08:01:30 +01:00
Peter Zijlstra 98c2f700ed sched/core: Simplify sched_class::pick_next_task()
Now that the indirect class call never uses the last two arguments of
pick_next_task(), remove them.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: ktkhai@virtuozzo.com
Cc: mgorman@suse.de
Cc: qais.yousef@arm.com
Cc: qperret@google.com
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20191108131909.660595546@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-11 08:35:20 +01:00
Peter Zijlstra 5d7d605642 sched/core: Optimize pick_next_task()
Ever since we moved the sched_class definitions into their own files,
the constant expression {fair,idle}_sched_class.pick_next_task() is
not in fact a compile time constant anymore and results in an indirect
call (barring LTO).

Fix that by exposing pick_next_task_{fair,idle}() directly, this gets
rid of the indirect call (and RETPOLINE) on the fast path.

Also remove the unlikely() from the idle case, it is in fact /the/ way
we select idle -- and that is a very common thing to do.

Performance for will-it-scale/sched_yield improves by 2% (as reported
by 0-day).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: ktkhai@virtuozzo.com
Cc: mgorman@suse.de
Cc: qais.yousef@arm.com
Cc: qperret@google.com
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20191108131909.603037345@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-11 08:35:19 +01:00
Peter Zijlstra f488e1057b sched/core: Make pick_next_task_idle() more consistent
Only pick_next_task_fair() needs the @prev and @rf argument; these are
required to implement the cpu-cgroup optimization. None of the other
pick_next_task() methods need this. Make pick_next_task_idle() more
consistent.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: ktkhai@virtuozzo.com
Cc: mgorman@suse.de
Cc: qais.yousef@arm.com
Cc: qperret@google.com
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20191108131909.545730862@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-11 08:35:19 +01:00
Peter Zijlstra 6e2df0581f sched: Fix pick_next_task() vs 'change' pattern race
Commit 67692435c4 ("sched: Rework pick_next_task() slow-path")
inadvertly introduced a race because it changed a previously
unexplored dependency between dropping the rq->lock and
sched_class::put_prev_task().

The comments about dropping rq->lock, in for example
newidle_balance(), only mentions the task being current and ->on_cpu
being set. But when we look at the 'change' pattern (in for example
sched_setnuma()):

	queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */
	running = task_current(rq, p); /* rq->curr == p */

	if (queued)
		dequeue_task(...);
	if (running)
		put_prev_task(...);

	/* change task properties */

	if (queued)
		enqueue_task(...);
	if (running)
		set_next_task(...);

It becomes obvious that if we do this after put_prev_task() has
already been called on @p, things go sideways. This is exactly what
the commit in question allows to happen when it does:

	prev->sched_class->put_prev_task(rq, prev, rf);
	if (!rq->nr_running)
		newidle_balance(rq, rf);

The newidle_balance() call will drop rq->lock after we've called
put_prev_task() and that allows the above 'change' pattern to
interleave and mess up the state.

Furthermore, it turns out we lost the RT-pull when we put the last DL
task.

Fix both problems by extracting the balancing from put_prev_task() and
doing a multi-class balance() pass before put_prev_task().

Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Quentin Perret <qperret@google.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
2019-11-08 22:34:14 +01:00
Qais Yousef e3b8b6a0d1 sched/core: Fix compilation error when cgroup not selected
When cgroup is disabled the following compilation error was hit

	kernel/sched/core.c: In function ‘uclamp_update_active_tasks’:
	kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known
	  struct css_task_iter it;
			       ^~
	kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration]
	  css_task_iter_start(css, 0, &it);
	  ^~~~~~~~~~~~~~~~~~~
	  __sg_page_iter_start
	kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration]
	  while ((p = css_task_iter_next(&it))) {
		      ^~~~~~~~~~~~~~~~~~
		      __sg_page_iter_next
	kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration]
	  css_task_iter_end(&it);
	  ^~~~~~~~~~~~~~~~~
	  get_task_cred
	kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable]
	  struct css_task_iter it;
			       ^~
	cc1: some warnings being treated as errors
	make[2]: *** [kernel/sched/core.o] Error 1

Fix by protetion uclamp_update_active_tasks() with
CONFIG_UCLAMP_TASK_GROUP

Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com
2019-11-08 22:34:14 +01:00
Jens Axboe 771b53d033 io-wq: small threadpool implementation for io_uring
This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:

- We can assign memory context smarter and more persistently if we
  manage the life time of threads.

- We can drop various work-arounds we have in io_uring, like the
  async_list.

- We can implement hashed work insertion, to manage concurrency of
  buffered writes without needing a) an extra workqueue, or b)
  needlessly making the concurrency of said workqueue very low
  which hurts performance of multiple buffered file writers.

- We can implement cancel through signals, for cancelling
  interruptible work like read/write (or send/recv) to/from sockets.

- We need the above cancel for being able to assign and use file tables
  from a process.

- We can implement a more thorough cancel operation in general.

- We need it to move towards a syslet/threadlet model for even faster
  async execution. For that we need to take ownership of the used
  threads.

This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.

io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-29 12:43:00 -06:00
Qian Cai 5facae4f35 locking/lockdep: Remove unused @nested argument from lock_release()
Since the following commit:

  b4adfe8e05 ("locking/lockdep: Remove unused argument in __lock_release")

@nested is no longer used in lock_release(), so remove it from all
lock_release() calls and friends.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: alexander.levin@microsoft.com
Cc: daniel@iogearbox.net
Cc: davem@davemloft.net
Cc: dri-devel@lists.freedesktop.org
Cc: duyuyang@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hannes@cmpxchg.org
Cc: intel-gfx@lists.freedesktop.org
Cc: jack@suse.com
Cc: jlbec@evilplan.or
Cc: joonas.lahtinen@linux.intel.com
Cc: joseph.qi@linux.alibaba.com
Cc: jslaby@suse.com
Cc: juri.lelli@redhat.com
Cc: maarten.lankhorst@linux.intel.com
Cc: mark@fasheh.com
Cc: mhocko@kernel.org
Cc: mripard@kernel.org
Cc: ocfs2-devel@oss.oracle.com
Cc: rodrigo.vivi@intel.com
Cc: sean@poorly.run
Cc: st@kernel.org
Cc: tj@kernel.org
Cc: tytso@mit.edu
Cc: vdavydov.dev@gmail.com
Cc: vincent.guittot@linaro.org
Cc: viro@zeniv.linux.org.uk
Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-09 12:46:10 +02:00
Aleksa Sarai dff3a85fec sched_setattr: switch to copy_struct_from_user()
Switch sched_setattr() syscall from it's own copying struct sched_attr
from userspace to the new dedicated copy_struct_from_user() helper.

The change is very straightforward, and helps unify the syscall
interface for struct-from-userspace syscalls. Ideally we could also
unify sched_getattr(2)-style syscalls as well, but unfortunately the
correct semantics for such syscalls are much less clear (see [1] for
more detail). In future we could come up with a more sane idea for how
the syscall interface should look.

[1]: commit 1251201c0d ("sched/core: Fix uclamp ABI bug, clean up and
     robustify sched_read_attr() ABI logic and code")

Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
[christian.brauner@ubuntu.com: improve commit message]
Link: https://lore.kernel.org/r/20191001011055.19283-4-cyphar@cyphar.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2019-10-01 15:45:17 +02:00
Linus Torvalds 9c5efe9ae7 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:

 - Apply a number of membarrier related fixes and cleanups, which fixes
   a use-after-free race in the membarrier code

 - Introduce proper RCU protection for tasks on the runqueue - to get
   rid of the subtle task_rcu_dereference() interface that was easy to
   get wrong

 - Misc fixes, but also an EAS speedup

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Avoid redundant EAS calculation
  sched/core: Remove double update_max_interval() call on CPU startup
  sched/core: Fix preempt_schedule() interrupt return comment
  sched/fair: Fix -Wunused-but-set-variable warnings
  sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
  sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
  sched/membarrier: Skip IPIs when mm->mm_users == 1
  selftests, sched/membarrier: Add multi-threaded test
  sched/membarrier: Fix p->mm->membarrier_state racy load
  sched/membarrier: Call sync_core only before usermode for same mm
  sched/membarrier: Remove redundant check
  sched/membarrier: Fix private expedited registration check
  tasks, sched/core: RCUify the assignment of rq->curr
  tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
  tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
  tasks: Add a count of task RCU users
  sched/core: Convert vcpu_is_preempted() from macro to an inline function
  sched/fair: Remove unused cfs_rq_clock_task() function
2019-09-28 12:39:07 -07:00
Valentin Schneider 9fc41acc89 sched/core: Remove double update_max_interval() call on CPU startup
update_max_interval() is called in both CPUHP_AP_SCHED_STARTING's startup
and teardown callbacks, but it turns out it's also called at the end of
the startup callback of CPUHP_AP_ACTIVE (which is further down the
startup sequence).

There's no point in repeating this interval update in the startup sequence
since the CPU will remain online until it goes down the teardown path.

Remove the redundant call in sched_cpu_activate() (CPUHP_AP_ACTIVE).

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190923093017.11755-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:32 +02:00
Valentin Schneider a49b4f4012 sched/core: Fix preempt_schedule() interrupt return comment
preempt_schedule_irq() is the one that should be called on return from
interrupt, clean up the comment to avoid any ambiguity.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-riscv@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Link: https://lkml.kernel.org/r/20190923143620.29334-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:32 +02:00
KeMeng Shi 714e501e16 sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
An oops can be triggered in the scheduler when running qemu on arm64:

 Unable to handle kernel paging request at virtual address ffff000008effe40
 Internal error: Oops: 96000007 [#1] SMP
 Process migration/0 (pid: 12, stack limit = 0x00000000084e3736)
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20
 lr : move_queued_task.isra.21+0x124/0x298
 ...
 Call trace:
  __ll_sc___cmpxchg_case_acq_4+0x4/0x20
  __migrate_task+0xc8/0xe0
  migration_cpu_stop+0x170/0x180
  cpu_stopper_thread+0xec/0x178
  smpboot_thread_fn+0x1ac/0x1e8
  kthread+0x134/0x138
  ret_from_fork+0x10/0x18

__set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to
migrage the process if process is not currently running on any one of the
CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an
invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if
CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects
check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if
corresponding bit is coincidentally set. As a consequence, kernel will
access an invalid rq address associate with the invalid CPU in
migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs.

The reproduce the crash:

  1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling
  sched_setaffinity.

  2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online"
  and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn.

  3) Oops appears if the invalid CPU is set in memory after tested cpumask.

Signed-off-by: KeMeng Shi <shikemeng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:31 +02:00
Mathieu Desnoyers 227a4aadc7 sched/membarrier: Fix p->mm->membarrier_state racy load
The membarrier_state field is located within the mm_struct, which
is not guaranteed to exist when used from runqueue-lock-free iteration
on runqueues by the membarrier system call.

Copy the membarrier_state from the mm_struct into the scheduler runqueue
when the scheduler switches between mm.

When registering membarrier for mm, after setting the registration bit
in the mm membarrier state, issue a synchronize_rcu() to ensure the
scheduler observes the change. In order to take care of the case
where a runqueue keeps executing the target mm without swapping to
other mm, iterate over each runqueue and issue an IPI to copy the
membarrier_state from the mm_struct into each runqueue which have the
same mm which state has just been modified.

Move the mm membarrier_state field closer to pgd in mm_struct to use
a cache line already touched by the scheduler switch_mm.

The membarrier_execve() (now membarrier_exec_mmap) hook now needs to
clear the runqueue's membarrier state in addition to clear the mm
membarrier state, so move its implementation into the scheduler
membarrier code so it can access the runqueue structure.

Add memory barrier in membarrier_exec_mmap() prior to clearing
the membarrier state, ensuring memory accesses executed prior to exec
are not reordered with the stores clearing the membarrier state.

As suggested by Linus, move all membarrier.c RCU read-side locks outside
of the for each cpu loops.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:30 +02:00
Eric W. Biederman 5311a98fef tasks, sched/core: RCUify the assignment of rq->curr
The current task on the runqueue is currently read with rcu_dereference().

To obtain ordinary RCU semantics for an rcu_dereference() of rq->curr it needs
to be paired with rcu_assign_pointer() of rq->curr.  Which provides the
memory barrier necessary to order assignments to the task_struct
and the assignment to rq->curr.

Unfortunately the assignment of rq->curr in __schedule is a hot path,
and it has already been show that additional barriers in that code
will reduce the performance of the scheduler.  So I will attempt to
describe below why you can effectively have ordinary RCU semantics
without any additional barriers.

The assignment of rq->curr in init_idle is a slow path called once
per cpu and that can use rcu_assign_pointer() without any concerns.

As I write this there are effectively two users of rcu_dereference() on
rq->curr.  There is the membarrier code in kernel/sched/membarrier.c
that only looks at "->mm" after the rcu_dereference().  Then there is
task_numa_compare() in kernel/sched/fair.c.  My best reading of the
code shows that task_numa_compare only access: "->flags",
"->cpus_ptr", "->numa_group", "->numa_faults[]",
"->total_numa_faults", and "->se.cfs_rq".

The code in __schedule() essentially does:
	rq_lock(...);
	smp_mb__after_spinlock();

	next = pick_next_task(...);
	rq->curr = next;

	context_switch(prev, next);

At the start of the function the rq_lock/smp_mb__after_spinlock
pair provides a full memory barrier.  Further there is a full memory barrier
in context_switch().

This means that any task that has already run and modified itself (the
common case) has already seen two memory barriers before __schedule()
runs and begins executing.  A task that modifies itself then sees a
third full memory barrier pair with the rq_lock();

For a brand new task that is enqueued with wake_up_new_task() there
are the memory barriers present from the taking and release the
pi_lock and the rq_lock as the processes is enqueued as well as the
full memory barrier at the start of __schedule() assuming __schedule()
happens on the same cpu.

This means that by the time we reach the assignment of rq->curr
except for values on the task struct modified in pick_next_task
the code has the same guarantees as if it used rcu_assign_pointer().

Reading through all of the implementations of pick_next_task it
appears pick_next_task is limited to modifying the task_struct fields
"->se", "->rt", "->dl".  These fields are the sched_entity structures
of the varies schedulers.

Further "->se.cfs_rq" is only changed in cgroup attach/move operations
initialized by userspace.

Unless I have missed something this means that in practice that the
users of "rcu_dereference(rq->curr)" get normal RCU semantics of
rcu_dereference() for the fields the care about, despite the
assignment of rq->curr in __schedule() ot using rcu_assign_pointer.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190903200603.GW2349@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:29 +02:00
Eric W. Biederman 0ff7b2cfba tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
In the ordinary case today the RCU grace period for a task_struct is
triggered when another process wait's for it's zombine and causes the
kernel to call release_task().  As the waiting task has to receive a
signal and then act upon it before this happens, typically this will
occur after the original task as been removed from the runqueue.

Unfortunaty in some cases such as self reaping tasks it can be shown
that release_task() will be called starting the grace period for
task_struct long before the task leaves the runqueue.

Therefore use put_task_struct_rcu_user() in finish_task_switch() to
guarantee that the there is a RCU lifetime after the task
leaves the runqueue.

Besides the change in the start of the RCU grace period for the
task_struct this change may cause perf_event_delayed_put and
trace_sched_process_free.  The function perf_event_delayed_put boils
down to just a WARN_ON for cases that I assume never show happen.  So
I don't see any problem with delaying it.

The function trace_sched_process_free is a trace point and thus
visible to user space.  Occassionally userspace has the strangest
dependencies so this has a miniscule chance of causing a regression.
This change only changes the timing of when the tracepoint is called.
The change in timing arguably gives userspace a more accurate picture
of what is going on.  So I don't expect there to be a regression.

In the case where a task self reaps we are pretty much guaranteed that
the RCU grace period is delayed.  So we should get quite a bit of
coverage in of this worst case for the change in a normal threaded
workload.  So I expect any issues to turn up quickly or not at all.

I have lightly tested this change and everything appears to work
fine.

Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87r24jdpl5.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-25 17:42:29 +02:00
Linus Torvalds 84da111de0 hmm related patches for 5.4
This is more cleanup and consolidation of the hmm APIs and the very
 strongly related mmu_notifier interfaces. Many places across the tree
 using these interfaces are touched in the process. Beyond that a cleanup
 to the page walker API and a few memremap related changes round out the
 series:
 
 - General improvement of hmm_range_fault() and related APIs, more
   documentation, bug fixes from testing, API simplification &
   consolidation, and unused API removal
 
 - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
   make them internal kconfig selects
 
 - Hoist a lot of code related to mmu notifier attachment out of drivers by
   using a refcount get/put attachment idiom and remove the convoluted
   mmu_notifier_unregister_no_release() and related APIs.
 
 - General API improvement for the migrate_vma API and revision of its only
   user in nouveau
 
 - Annotate mmu_notifiers with lockdep and sleeping region debugging
 
 Two series unrelated to HMM or mmu_notifiers came along due to
 dependencies:
 
 - Allow pagemap's memremap_pages family of APIs to work without providing
   a struct device
 
 - Make walk_page_range() and related use a constant structure for function
   pointers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl1/nnkACgkQOG33FX4g
 mxqaRg//c6FqowV1pQlLutvAOAgMdpzfZ9eaaDKngy9RVQxz+k/MmJrdRH/p/mMA
 Pq93A1XfwtraGKErHegFXGEDk4XhOustVAVFwvjyXO41dTUdoFVUkti6ftbrl/rS
 6CT+X90jlvrwdRY7QBeuo7lxx7z8Qkqbk1O1kc1IOracjKfNJS+y6LTamy6weM3g
 tIMHI65PkxpRzN36DV9uCN5dMwFzJ73DWHp1b0acnDIigkl6u5zp6orAJVWRjyQX
 nmEd3/IOvdxaubAoAvboNS5CyVb4yS9xshWWMbH6AulKJv3Glca1Aa7QuSpBoN8v
 wy4c9+umzqRgzgUJUe1xwN9P49oBNhJpgBSu8MUlgBA4IOc3rDl/Tw0b5KCFVfkH
 yHkp8n6MP8VsRrzXTC6Kx0vdjIkAO8SUeylVJczAcVSyHIo6/JUJCVDeFLSTVymh
 EGWJ7zX2iRhUbssJ6/izQTTQyCH3YIyZ5QtqByWuX2U7ZrfkqS3/EnBW1Q+j+gPF
 Z2yW8iT6k0iENw6s8psE9czexuywa/Lttz94IyNlOQ8rJTiQqB9wLaAvg9hvUk7a
 kuspL+JGIZkrL3ouCeO/VA6xnaP+Q7nR8geWBRb8zKGHmtWrb5Gwmt6t+vTnCC2l
 olIDebrnnxwfBQhEJ5219W+M1pBpjiTpqK/UdBd92A4+sOOhOD0=
 =FRGg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull hmm updates from Jason Gunthorpe:
 "This is more cleanup and consolidation of the hmm APIs and the very
  strongly related mmu_notifier interfaces. Many places across the tree
  using these interfaces are touched in the process. Beyond that a
  cleanup to the page walker API and a few memremap related changes
  round out the series:

   - General improvement of hmm_range_fault() and related APIs, more
     documentation, bug fixes from testing, API simplification &
     consolidation, and unused API removal

   - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
     and make them internal kconfig selects

   - Hoist a lot of code related to mmu notifier attachment out of
     drivers by using a refcount get/put attachment idiom and remove the
     convoluted mmu_notifier_unregister_no_release() and related APIs.

   - General API improvement for the migrate_vma API and revision of its
     only user in nouveau

   - Annotate mmu_notifiers with lockdep and sleeping region debugging

  Two series unrelated to HMM or mmu_notifiers came along due to
  dependencies:

   - Allow pagemap's memremap_pages family of APIs to work without
     providing a struct device

   - Make walk_page_range() and related use a constant structure for
     function pointers"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
  libnvdimm: Enable unit test infrastructure compile checks
  mm, notifier: Catch sleeping/blocking for !blockable
  kernel.h: Add non_block_start/end()
  drm/radeon: guard against calling an unpaired radeon_mn_unregister()
  csky: add missing brackets in a macro for tlb.h
  pagewalk: use lockdep_assert_held for locking validation
  pagewalk: separate function pointers from iterator data
  mm: split out a new pagewalk.h header from mm.h
  mm/mmu_notifiers: annotate with might_sleep()
  mm/mmu_notifiers: prime lockdep
  mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
  mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
  mm/hmm: hmm_range_fault() infinite loop
  mm/hmm: hmm_range_fault() NULL pointer bug
  mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
  mm/mmu_notifiers: remove unregister_no_release
  RDMA/odp: remove ib_ucontext from ib_umem
  RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  ...
2019-09-21 10:07:42 -07:00
Linus Torvalds 7f2444d38f Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
 "Timers and timekeeping updates:

   - A large overhaul of the posix CPU timer code which is a preparation
     for moving the CPU timer expiry out into task work so it can be
     properly accounted on the task/process.

     An update to the bogus permission checks will come later during the
     merge window as feedback was not complete before heading of for
     travel.

   - Switch the timerqueue code to use cached rbtrees and get rid of the
     homebrewn caching of the leftmost node.

   - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
     single function

   - Implement the separation of hrtimers to be forced to expire in hard
     interrupt context even when PREEMPT_RT is enabled and mark the
     affected timers accordingly.

   - Implement a mechanism for hrtimers and the timer wheel to protect
     RT against priority inversion and live lock issues when a (hr)timer
     which should be canceled is currently executing the callback.
     Instead of infinitely spinning, the task which tries to cancel the
     timer blocks on a per cpu base expiry lock which is held and
     released by the (hr)timer expiry code.

   - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
     resulting in faster access to timekeeping functions.

   - Updates to various clocksource/clockevent drivers and their device
     tree bindings.

   - The usual small improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  posix-cpu-timers: Fix permission check regression
  posix-cpu-timers: Always clear head pointer on dequeue
  hrtimer: Add a missing bracket and hide `migration_base' on !SMP
  posix-cpu-timers: Make expiry_active check actually work correctly
  posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
  tick: Mark sched_timer to expire in hard interrupt context
  hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
  x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
  posix-cpu-timers: Utilize timerqueue for storage
  posix-cpu-timers: Move state tracking to struct posix_cputimers
  posix-cpu-timers: Deduplicate rlimit handling
  posix-cpu-timers: Remove pointless comparisons
  posix-cpu-timers: Get rid of 64bit divisions
  posix-cpu-timers: Consolidate timer expiry further
  posix-cpu-timers: Get rid of zero checks
  rlimit: Rewrite non-sensical RLIMIT_CPU comment
  posix-cpu-timers: Respect INFINITY for hard RTTIME limit
  posix-cpu-timers: Switch thread group sampling to array
  posix-cpu-timers: Restructure expiry array
  posix-cpu-timers: Remove cputime_expires
  ...
2019-09-17 12:35:15 -07:00
Linus Torvalds 7e67a85999 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:

 - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
   Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
   Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.

   As perf and the scheduler is getting bigger and more complex,
   document the status quo of current responsibilities and interests,
   and spread the review pain^H^H^H^H fun via an increase in the Cc:
   linecount generated by scripts/get_maintainer.pl. :-)

 - Add another series of patches that brings the -rt (PREEMPT_RT) tree
   closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
   into a new CONFIG_PREEMPTION category that will allow the eventual
   introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
   to go though.

 - Extend the CPU cgroup controller with uclamp.min and uclamp.max to
   allow the finer shaping of CPU bandwidth usage.

 - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).

 - Improve the behavior of high CPU count, high thread count
   applications running under cpu.cfs_quota_us constraints.

 - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.

 - Improve CPU isolation housekeeping CPU allocation NUMA locality.

 - Fix deadline scheduler bandwidth calculations and logic when cpusets
   rebuilds the topology, or when it gets deadline-throttled while it's
   being offlined.

 - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
   setscheduler() system calls without creating global serialization.
   Add new synchronization between cpuset topology-changing events and
   the deadline acceptance tests in setscheduler(), which were broken
   before.

 - Rework the active_mm state machine to be less confusing and more
   optimal.

 - Rework (simplify) the pick_next_task() slowpath.

 - Improve load-balancing on AMD EPYC systems.

 - ... and misc cleanups, smaller fixes and improvements - please see
   the Git log for more details.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  sched/psi: Correct overly pessimistic size calculation
  sched/fair: Speed-up energy-aware wake-ups
  sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
  sched/uclamp: Update CPU's refcount on TG's clamp changes
  sched/uclamp: Use TG's clamps to restrict TASK's clamps
  sched/uclamp: Propagate system defaults to the root group
  sched/uclamp: Propagate parent clamps
  sched/uclamp: Extend CPU's cgroup controller
  sched/topology: Improve load balancing on AMD EPYC systems
  arch, ia64: Make NUMA select SMP
  sched, perf: MAINTAINERS update, add submaintainers and reviewers
  sched/fair: Use rq_lock/unlock in online_fair_sched_group
  cpufreq: schedutil: fix equation in comment
  sched: Rework pick_next_task() slow-path
  sched: Allow put_prev_task() to drop rq->lock
  sched/fair: Expose newidle_balance()
  sched: Add task_struct pointer to sched_class::set_curr_task
  sched: Rework CPU hotplug task selection
  sched/{rt,deadline}: Fix set_next_task vs pick_next_task
  sched: Fix kerneldoc comment for ia64_set_curr_task
  ...
2019-09-16 17:25:49 -07:00
Linus Torvalds 94d18ee934 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "This cycle's RCU changes were:

   - A few more RCU flavor consolidation cleanups.

   - Updates to RCU's list-traversal macros improving lockdep usability.

   - Forward-progress improvements for no-CBs CPUs: Avoid ignoring
     incoming callbacks during grace-period waits.

   - Forward-progress improvements for no-CBs CPUs: Use ->cblist
     structure to take advantage of others' grace periods.

   - Also added a small commit that avoids needlessly inflicting
     scheduler-clock ticks on callback-offloaded CPUs.

   - Forward-progress improvements for no-CBs CPUs: Reduce contention on
     ->nocb_lock guarding ->cblist.

   - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
     list to further reduce contention on ->nocb_lock guarding ->cblist.

   - Miscellaneous fixes.

   - Torture-test updates.

   - minor LKMM updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
  MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
  rcu: Don't include <linux/ktime.h> in rcutiny.h
  rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
  rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
  rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
  rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
  rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
  rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
  rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
  rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
  rcu/nocb: Add bypass callback queueing
  rcu/nocb: Atomic ->len field in rcu_segcblist structure
  rcu/nocb: Unconditionally advance and wake for excessive CBs
  rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
  rcu/nocb: Reduce contention at no-CBs invocation-done time
  rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
  rcu/nocb: Round down for number of no-CBs grace-period kthreads
  rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
  rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
  rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
  ...
2019-09-16 16:28:19 -07:00
Ingo Molnar 563c4f85f9 Merge branch 'sched/rt' into sched/core, to pick up -rt changes
Pick up the first couple of patches working towards PREEMPT_RT.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-16 14:05:04 +02:00
Daniel Vetter 312364f353 kernel.h: Add non_block_start/end()
In some special cases we must not block, but there's not a spinlock,
preempt-off, irqs-off or similar critical section already that arms the
might_sleep() debug checks. Add a non_block_start/end() pair to annotate
these.

This will be used in the oom paths of mmu-notifiers, where blocking is not
allowed to make sure there's forward progress. Quoting Michal:

"The notifier is called from quite a restricted context - oom_reaper -
which shouldn't depend on any locks or sleepable conditionals. The code
should be swift as well but we mostly do care about it to make a forward
progress. Checking for sleepable context is the best thing we could come
up with that would describe these demands at least partially."

Peter also asked whether we want to catch spinlocks on top, but Michal
said those are less of a problem because spinlocks can't have an indirect
dependency upon the page allocator and hence close the loop with the oom
reaper.

Suggested by Michal Hocko.

Link: https://lore.kernel.org/r/20190826201425.17547-4-daniel.vetter@ffwll.ch
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:05 -03:00
Ingo Molnar 1251201c0d sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code
Thadeu Lima de Souza Cascardo reported that 'chrt' broke on recent kernels:

  $ chrt -p $$
  chrt: failed to get pid 26306's policy: Argument list too long

and he has root-caused the bug to the following commit increasing sched_attr
size and breaking sched_read_attr() into returning -EFBIG:

  a509a7cd79 ("sched/uclamp: Extend sched_setattr() to support utilization clamping")

The other, bigger bug is that the whole sched_getattr() and sched_read_attr()
logic of checking non-zero bits in new ABI components is arguably broken,
and pretty much any extension of the ABI will spuriously break the ABI.
That's way too fragile.

Instead implement the perf syscall's extensible ABI instead, which we
already implement on the sched_setattr() side:

 - if user-attributes have the same size as kernel attributes then the
   logic is unchanged.

 - if user-attributes are larger than the kernel knows about then simply
   skip the extra bits, but set attr->size to the (smaller) kernel size
   so that tooling can (in principle) handle older kernel as well.

 - if user-attributes are smaller than the kernel knows about then just
   copy whatever user-space can accept.

Also clean up the whole logic:

 - Simplify the code flow - there's no need for 'ret' for example.

 - Standardize on 'kattr/uattr' and 'ksize/usize' naming to make sure we
   always know which side we are dealing with.

 - Why is it called 'read' when what it does is to copy to user? This
   code is so far away from VFS read() semantics that the naming is
   actively confusing. Name it sched_attr_copy_to_user() instead, which
   mirrors other copy_to_user() functionality.

 - Move the attr->size assignment from the head of sched_getattr() to the
   sched_attr_copy_to_user() function. Nothing else within the kernel
   should care about the size of the structure.

With these fixes the sched_getattr() syscall now nicely supports an
extensible ABI in both a forward and backward compatible fashion, and
will also fix the chrt bug.

As an added bonus the bogus -EFBIG return is removed as well, which as
Thadeu noted should have been -E2BIG to begin with.

Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a509a7cd79 ("sched/uclamp: Extend sched_setattr() to support utilization clamping")
Link: https://lkml.kernel.org/r/20190904075532.GA26751@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-04 19:51:30 +02:00
Patrick Bellasi 0413d7f33e sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
The supported clamp indexes are defined in 'enum clamp_id', however, because
of the code logic in some of the first utilization clamping series version,
sometimes we needed to use 'unsigned int' to represent indices.

This is not more required since the final version of the uclamp_* APIs can
always use the proper enum uclamp_id type.

Fix it with a bulk rename now that we have all the bits merged.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-7-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:40 +02:00
Patrick Bellasi babbe170e0 sched/uclamp: Update CPU's refcount on TG's clamp changes
On updates of task group (TG) clamp values, ensure that these new values
are enforced on all RUNNABLE tasks of the task group, i.e. all RUNNABLE
tasks are immediately boosted and/or capped as requested.

Do that each time we update effective clamps from cpu_util_update_eff().
Use the *cgroup_subsys_state (css) to walk the list of tasks in each
affected TG and update their RUNNABLE tasks.
Update each task by using the same mechanism used for cpu affinity masks
updates, i.e. by taking the rq lock.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-6-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:40 +02:00
Patrick Bellasi 3eac870a32 sched/uclamp: Use TG's clamps to restrict TASK's clamps
When a task specific clamp value is configured via sched_setattr(2), this
value is accounted in the corresponding clamp bucket every time the task is
{en,de}qeued. However, when cgroups are also in use, the task specific
clamp values could be restricted by the task_group (TG) clamp values.

Update uclamp_cpu_inc() to aggregate task and TG clamp values. Every time a
task is enqueued, it's accounted in the clamp bucket tracking the smaller
clamp between the task specific value and its TG effective value. This
allows to:

1. ensure cgroup clamps are always used to restrict task specific requests,
   i.e. boosted not more than its TG effective protection and capped at
   least as its TG effective limit.

2. implement a "nice-like" policy, where tasks are still allowed to request
   less than what enforced by their TG effective limits and protections

Do this by exploiting the concept of "effective" clamp, which is already
used by a TG to track parent enforced restrictions.

Apply task group clamp restrictions only to tasks belonging to a child
group. While, for tasks in the root group or in an autogroup, system
defaults are still enforced.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:39 +02:00
Patrick Bellasi 7274a5c1bb sched/uclamp: Propagate system defaults to the root group
The clamp values are not tunable at the level of the root task group.
That's for two main reasons:

 - the root group represents "system resources" which are always
   entirely available from the cgroup standpoint.

 - when tuning/restricting "system resources" makes sense, tuning must
   be done using a system wide API which should also be available when
   control groups are not.

When a system wide restriction is available, cgroups should be aware of
its value in order to know exactly how much "system resources" are
available for the subgroups.

Utilization clamping supports already the concepts of:

 - system defaults: which define the maximum possible clamp values
   usable by tasks.

 - effective clamps: which allows a parent cgroup to constraint (maybe
   temporarily) its descendants without losing the information related
   to the values "requested" from them.

Exploit these two concepts and bind them together in such a way that,
whenever system default are tuned, the new values are propagated to
(possibly) restrict or relax the "effective" value of nested cgroups.

When cgroups are in use, force an update of all the RUNNABLE tasks.
Otherwise, keep things simple and do just a lazy update next time each
task will be enqueued.
Do that since we assume a more strict resource control is required when
cgroups are in use. This allows also to keep "effective" clamp values
updated in case we need to expose them to user-space.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:38 +02:00
Patrick Bellasi 0b60ba2dd3 sched/uclamp: Propagate parent clamps
In order to properly support hierarchical resources control, the cgroup
delegation model requires that attribute writes from a child group never
fail but still are locally consistent and constrained based on parent's
assigned resources. This requires to properly propagate and aggregate
parent attributes down to its descendants.

Implement this mechanism by adding a new "effective" clamp value for each
task group. The effective clamp value is defined as the smaller value
between the clamp value of a group and the effective clamp value of its
parent. This is the actual clamp value enforced on tasks in a task group.

Since it's possible for a cpu.uclamp.min value to be bigger than the
cpu.uclamp.max value, ensure local consistency by restricting each
"protection" (i.e. min utilization) with the corresponding "limit"
(i.e. max utilization).

Do that at effective clamps propagation to ensure all user-space write
never fails while still always tracking the most restrictive values.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-3-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:38 +02:00
Patrick Bellasi 2480c09313 sched/uclamp: Extend CPU's cgroup controller
The cgroup CPU bandwidth controller allows to assign a specified
(maximum) bandwidth to the tasks of a group. However this bandwidth is
defined and enforced only on a temporal base, without considering the
actual frequency a CPU is running on. Thus, the amount of computation
completed by a task within an allocated bandwidth can be very different
depending on the actual frequency the CPU is running that task.
The amount of computation can be affected also by the specific CPU a
task is running on, especially when running on asymmetric capacity
systems like Arm's big.LITTLE.

With the availability of schedutil, the scheduler is now able
to drive frequency selections based on actual task utilization.
Moreover, the utilization clamping support provides a mechanism to
bias the frequency selection operated by schedutil depending on
constraints assigned to the tasks currently RUNNABLE on a CPU.

Giving the mechanisms described above, it is now possible to extend the
cpu controller to specify the minimum (or maximum) utilization which
should be considered for tasks RUNNABLE on a cpu.
This makes it possible to better defined the actual computational
power assigned to task groups, thus improving the cgroup CPU bandwidth
controller which is currently based just on time constraints.

Extend the CPU controller with a couple of new attributes uclamp.{min,max}
which allow to enforce utilization boosting and capping for all the
tasks in a group.

Specifically:

- uclamp.min: defines the minimum utilization which should be considered
	      i.e. the RUNNABLE tasks of this group will run at least at a
	      minimum frequency which corresponds to the uclamp.min
	      utilization

- uclamp.max: defines the maximum utilization which should be considered
	      i.e. the RUNNABLE tasks of this group will run up to a
	      maximum frequency which corresponds to the uclamp.max
	      utilization

These attributes:

a) are available only for non-root nodes, both on default and legacy
   hierarchies, while system wide clamps are defined by a generic
   interface which does not depends on cgroups. This system wide
   interface enforces constraints on tasks in the root node.

b) enforce effective constraints at each level of the hierarchy which
   are a restriction of the group requests considering its parent's
   effective constraints. Root group effective constraints are defined
   by the system wide interface.
   This mechanism allows each (non-root) level of the hierarchy to:
   - request whatever clamp values it would like to get
   - effectively get only up to the maximum amount allowed by its parent

c) have higher priority than task-specific clamps, defined via
   sched_setattr(), thus allowing to control and restrict task requests.

Add two new attributes to the cpu controller to collect "requested"
clamp values. Allow that at each non-root level of the hierarchy.
Keep it simple by not caring now about "effective" values computation
and propagation along the hierarchy.

Update sysctl_sched_uclamp_handler() to use the newly introduced
uclamp_mutex so that we serialize system default updates with cgroup
relate updates.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:37 +02:00
Sebastian Andrzej Siewior b0fdc01354 sched/core: Schedule new worker even if PI-blocked
If a task is PI-blocked (blocking on sleeping spinlock) then we don't want to
schedule a new kworker if we schedule out due to lock contention because !RT
does not do that as well. A spinning spinlock disables preemption and a worker
does not schedule out on lock contention (but spin).

On RT the RW-semaphore implementation uses an rtmutex so
tsk_is_pi_blocked() will return true if a task blocks on it. In this case we
will now start a new worker which may deadlock if one worker is waiting on
progress from another worker. Since a RW-semaphore starts a new worker on !RT,
we should do the same on RT.

XFS is able to trigger this deadlock.

Allow to schedule new worker if the current worker is PI-blocked.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190816160626.12742-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-19 10:57:26 +02:00
Peter Zijlstra 67692435c4 sched: Rework pick_next_task() slow-path
Avoid the RETRY_TASK case in the pick_next_task() slow path.

By doing the put_prev_task() early, we get the rt/deadline pull done,
and by testing rq->nr_running we know if we need newidle_balance().

This then gives a stable state to pick a task from.

Since the fast-path is fair only; it means the other classes will
always have pick_next_task(.prev=NULL, .rf=NULL) and we can simplify.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/aa34d24b36547139248f32a30138791ac6c02bd6.1559129225.git.vpillai@digitalocean.com
2019-08-08 09:09:31 +02:00
Peter Zijlstra 5f2a45fc9e sched: Allow put_prev_task() to drop rq->lock
Currently the pick_next_task() loop is convoluted and ugly because of
how it can drop the rq->lock and needs to restart the picking.

For the RT/Deadline classes, it is put_prev_task() where we do
balancing, and we could do this before the picking loop. Make this
possible.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/e4519f6850477ab7f3d257062796e6425ee4ba7c.1559129225.git.vpillai@digitalocean.com
2019-08-08 09:09:31 +02:00
Peter Zijlstra 03b7fad167 sched: Add task_struct pointer to sched_class::set_curr_task
In preparation of further separating pick_next_task() and
set_curr_task() we have to pass the actual task into it, while there,
rename the thing to better pair with put_prev_task().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/a96d1bcdd716db4a4c5da2fece647a1456c0ed78.1559129225.git.vpillai@digitalocean.com
2019-08-08 09:09:31 +02:00
Peter Zijlstra 10e7071b2f sched: Rework CPU hotplug task selection
The CPU hotplug task selection is the only place where we used
put_prev_task() on a task that is not current. While looking at that,
it occured to me that we can simplify all that by by using a custom
pick loop.

Since we don't need to put current, we can do away with the fake task
too.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
2019-08-08 09:09:30 +02:00
Peter Zijlstra 5feeb7837a sched: Fix kerneldoc comment for ia64_set_curr_task
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/fde3a65ea3091ec6b84dac3c19639f85f452c5d1.1559129225.git.vpillai@digitalocean.com
2019-08-08 09:09:30 +02:00
Peter Zijlstra 139d025cda sched: Clean up active_mm reference counting
The current active_mm reference counting is confusing and sub-optimal.

Rewrite the code to explicitly consider the 4 separate cases:

    user -> user

	When switching between two user tasks, all we need to consider
	is switch_mm().

    user -> kernel

	When switching from a user task to a kernel task (which
	doesn't have an associated mm) we retain the last mm in our
	active_mm. Increment a reference count on active_mm.

  kernel -> kernel

	When switching between kernel threads, all we need to do is
	pass along the active_mm reference.

  kernel -> user

	When switching between a kernel and user task, we must switch
	from the last active_mm to the next mm, hoping of course that
	these are the same. Decrement a reference on the active_mm.

The code keeps a different order, because as you'll note, both 'to
user' cases require switch_mm().

And where the old code would increment/decrement for the 'kernel ->
kernel' case, the new code observes this is a neutral operation and
avoids touching the reference count.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: luto@kernel.org
2019-08-08 09:09:30 +02:00
Paul E. McKenney b55bd58555 time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:

------------------------------------------------------------------------

================================
WARNING: inconsistent lock state
5.2.0-rc1+ #513 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
{IN-HARDIRQ-W} state was registered at:
  lock_acquire+0xb0/0x1c0
  _raw_spin_lock_irqsave+0x3c/0x50
  tick_broadcast_switch_to_oneshot+0xd/0x40
  tick_switch_to_oneshot+0x4f/0xd0
  hrtimer_run_queues+0xf3/0x130
  run_local_timers+0x1c/0x50
  update_process_times+0x1c/0x50
  tick_periodic+0x26/0xc0
  tick_handle_periodic+0x1a/0x60
  smp_apic_timer_interrupt+0x80/0x2a0
  apic_timer_interrupt+0xf/0x20
  _raw_spin_unlock_irqrestore+0x4e/0x60
  rcu_nocb_gp_kthread+0x15d/0x590
  kthread+0xf3/0x130
  ret_from_fork+0x3a/0x50
irq event stamp: 171
hardirqs last  enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
softirqs last disabled at (0): [<0000000000000000>] 0x0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(tick_broadcast_lock);
  <Interrupt>
    lock(tick_broadcast_lock);

 *** DEADLOCK ***

1 lock held by migration/1/14:
 #0: (____ptrval____) (clockevents_lock){+.+.}, at: tick_offline_cpu+0xf/0x30

stack backtrace:
CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.2.0-rc1+ #513
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x5e/0x8b
 print_usage_bug+0x1fc/0x216
 ? print_shortest_lock_dependencies+0x1b0/0x1b0
 mark_lock+0x1f2/0x280
 __lock_acquire+0x1e0/0x18f0
 ? __lock_acquire+0x21b/0x18f0
 ? _raw_spin_unlock_irqrestore+0x4e/0x60
 lock_acquire+0xb0/0x1c0
 ? tick_broadcast_offline+0xf/0x70
 _raw_spin_lock+0x33/0x40
 ? tick_broadcast_offline+0xf/0x70
 tick_broadcast_offline+0xf/0x70
 tick_offline_cpu+0x16/0x30
 take_cpu_down+0x7d/0xa0
 multi_cpu_stop+0xa2/0xe0
 ? cpu_stop_queue_work+0xc0/0xc0
 cpu_stopper_thread+0x6d/0x100
 smpboot_thread_fn+0x169/0x240
 kthread+0xf3/0x130
 ? sort_range+0x20/0x20
 ? kthread_cancel_delayed_work_sync+0x10/0x10
 ret_from_fork+0x3a/0x50

------------------------------------------------------------------------

To reproduce, run the following rcutorture test:

        tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"

It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline().  This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.

Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop().  Which in turn
had irqs enabled after return from cancel_delayed_work_sync().  Which is a
wrapper around __cancel_work_timer().  Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.

Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop():  The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.

This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop().  Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself.  A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so).  The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2019-08-01 14:05:51 -07:00
Sebastian Andrzej Siewior d5096aa65a sched: Mark hrtimers to expire in hard interrupt context
The scheduler related hrtimers need to expire in hard interrupt context
even on PREEMPT_RT enabled kernels. Mark then as such.

No functional change.

[ tglx: Split out from larger combo patch. Add changelog. ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.077004842@linutronix.de
2019-08-01 20:51:19 +02:00
Thomas Gleixner c1a280b68d sched/preempt: Use CONFIG_PREEMPTION where appropriate
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.

Switch the preemption code, scheduler and init task over to use
CONFIG_PREEMPTION.

That's the first step towards RT in that area. The more complex changes are
coming separately.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190726212124.117528401@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-31 19:03:34 +02:00
Qian Cai a1dc0446d6 sched/core: Silence a warning in sched_init()
Compiling a kernel with both FAIR_GROUP_SCHED=n and RT_GROUP_SCHED=n
will generate a compiler warning:

  kernel/sched/core.c: In function 'sched_init':
  kernel/sched/core.c:5906:32: warning: variable 'ptr' set but not used

It is unnecessary to have both "alloc_size" and "ptr", so just combine
them.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Link: https://lkml.kernel.org/r/20190720012319.884-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:05 +02:00
Juri Lelli a07db5c086 sched/core: Fix CPU controller for !RT_GROUP_SCHED
On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).

E.g.:

  # mkdir /sys/fs/cgroup/cpu,cpuacct/group1
  # chrt -fp 10 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  bash: echo: write error: Invalid argument
  # chrt -op 0 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  # chrt -fp 10 $$
  # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  2345
  2598
  # chrt -p 2345
  pid 2345's current scheduling policy: SCHED_FIFO
  pid 2345's current scheduling priority: 10

Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).

Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.

Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:05 +02:00
Juri Lelli 710da3c8ea sched/core: Prevent race condition between cpuset and __sched_setscheduler()
No synchronisation mechanism exists between the cpuset subsystem and
calls to function __sched_setscheduler(). As such, it is possible that
new root domains are created on the cpuset side while a deadline
acceptance test is carried out in __sched_setscheduler(), leading to a
potential oversell of CPU bandwidth.

Grab cpuset_rwsem read lock from core scheduler, so to prevent
situations such as the one described above from happening.

The only exception is normalize_rt_tasks() which needs to work under
tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with
this, as this function is only called by sysrq and, if that gets
triggered, DEADLINE guarantees are already gone out of the window
anyway.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:04 +02:00
Mathieu Poirier 4b211f2b12 sched/core: Streamle calls to task_rq_unlock()
Calls to task_rq_unlock() are done several times in the
__sched_setscheduler() function.  This is fine when only the rq lock needs to be
handled but not so much when other locks come into play.

This patch streamlines the release of the rq lock so that only one
location need to be modified when dealing with more than one lock.

No change of functionality is introduced by this patch.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-3-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:57 +02:00
Paul E. McKenney 84ec3a0787 time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint

The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:

	WARNING: inconsistent lock state
	5.2.0-rc1+ #513 Not tainted
	--------------------------------
	inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
	migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
	(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
	{IN-HARDIRQ-W} state was registered at:
	  lock_acquire+0xb0/0x1c0
	  _raw_spin_lock_irqsave+0x3c/0x50
	  tick_broadcast_switch_to_oneshot+0xd/0x40
	  tick_switch_to_oneshot+0x4f/0xd0
	  hrtimer_run_queues+0xf3/0x130
	  run_local_timers+0x1c/0x50
	  update_process_times+0x1c/0x50
	  tick_periodic+0x26/0xc0
	  tick_handle_periodic+0x1a/0x60
	  smp_apic_timer_interrupt+0x80/0x2a0
	  apic_timer_interrupt+0xf/0x20
	  _raw_spin_unlock_irqrestore+0x4e/0x60
	  rcu_nocb_gp_kthread+0x15d/0x590
	  kthread+0xf3/0x130
	  ret_from_fork+0x3a/0x50
	irq event stamp: 171
	hardirqs last  enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
	hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
	softirqs last  enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
	softirqs last disabled at (0): [<0000000000000000>] 0x0

        [...]

To reproduce, run the following rcutorture test:

 $ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"

It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline().  This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.

Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop().  Which in turn
had irqs enabled after return from cancel_delayed_work_sync().  Which is a
wrapper around __cancel_work_timer().  Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.

Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop():  The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.

This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop().  Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself.  A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so).  The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:53 +02:00