Commit Graph

503 Commits

Author SHA1 Message Date
Bart Van Assche f049cf1a7b scsi: sd: Rely on the driver core for asynchronous probing
As explained during the 2018 LSF/MM session about increasing SCSI disk
probing concurrency, the problems with the current probing approach are as
follows:

 - The driver core is unaware of asynchronous SCSI LUN probing.
   wait_for_device_probe() waits for all asynchronous probes except
   asynchronous SCSI disk probes.

 - There is unnecessary serialization between sd_probe() and sd_remove().
   This can lead to a deadlock.

Hence this patch that modifies the sd driver such that it uses the driver
core framework for asynchronous probing. The async domain and
get_device()/put_device() pairs that became superfluous due to this change
are removed.

This patch does not affect the time needed for loading the scsi_debug
kernel module with parameters delay=0 and max_luns=256.

This patch depends on commit ef0ff68351 ("driver core: Probe devices
asynchronously instead of the driver") that went upstream in kernel version
v5.1-rc1.

Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:17 -04:00
Linus Torvalds 2409207a73 SCSI fixes on 20190524
This is the same set of patches sent in the merge window as the final
 pull except that Martin's read only rework is replaced with a simple
 revert of the original change that caused the regression.  Everything
 else is an obvious fix or small cleanup.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXOh2RyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe+mAP9PtAon
 IUlSEcJaMhej3VSyjxWYxble0pbCkBYnuH220gEAk7eCISK3xwAdkWYD0wVLLqxo
 9t8qgzKbZSPZVRRD8Tk=
 =9p0X
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is the same set of patches sent in the merge window as the final
  pull except that Martin's read only rework is replaced with a simple
  revert of the original change that caused the regression.

  Everything else is an obvious fix or small cleanup"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: sd: Keep disk read-only when re-reading partition"
  scsi: bnx2fc: fix incorrect cast to u64 on shift operation
  scsi: smartpqi: Reporting unhandled SCSI errors
  scsi: myrs: Fix uninitialized variable
  scsi: lpfc: Update lpfc version to 12.2.0.2
  scsi: lpfc: add check for loss of ndlp when sending RRQ
  scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
  scsi: lpfc: resolve lockdep warnings
  scsi: qedi: remove set but not used variables 'cdev' and 'udev'
  scsi: qedi: remove memset/memcpy to nfunc and use func instead
  scsi: qla2xxx: Add cleanup for PCI EEH recovery
2019-05-24 17:30:28 -07:00
Christoph Hellwig 5897b844b7 scsi: sd: add a SPDX tag to sd.c
sd.c is the only sd file missing licensing information.  Add a
GPLv2 tag for the default kernel license.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21 06:16:22 -04:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Martin K. Petersen 8acf608e60 Revert "scsi: sd: Keep disk read-only when re-reading partition"
This reverts commit 20bd1d026a.

This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.

Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.

Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.

Fixes: 20bd1d026a ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-20 10:57:18 -04:00
Bart Van Assche 395b9bca6b scsi: sd: Revert "Rely on the driver core for asynchronous probing"
Hibernation hangs as follows due to commit 21e6ba3f0e when using SATA:

Call Trace:
 __schedule+0x464/0xe70
 schedule+0x4e/0xd0
 blk_queue_enter+0x5fe/0x7e0
 generic_make_request+0x313/0x950
 submit_bio+0x9b/0x250
 submit_bio_wait+0xc9/0x110
 hib_submit_io+0x17d/0x1c0
 write_page+0x61/0xa0
 swap_write_page+0x4b/0x1f0
 swsusp_write+0x2f9/0x3d0
 hibernate.cold.10+0x108/0x231
 state_store+0xf7/0x100
 kobj_attr_store+0x37/0x50
 sysfs_kf_write+0x87/0xa0
 kernfs_fop_write+0x186/0x240
 __vfs_write+0x4d/0x90
 vfs_write+0xfa/0x260
 ksys_write+0xb9/0x1a0
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x71/0x210
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Hence revert commit 21e6ba3f0e.

Cc: Pavel Machek <pavel@ucw.cz>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:13:12 -04:00
Bart Van Assche 9a058e88fd scsi: sd: Revert "Inline sd_probe_part2()"
Reverts commit d16ece577b to make a clean revert of its predecessor
possible.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:13:12 -04:00
Martin K. Petersen 17631462cd Merge branch '5.1/scsi-fixes' into 5.2/merge
We have a few submissions for 5.2 that depend on fixes merged post
5.1-rc1. Merge the fixes branch into queue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:27:23 -04:00
Martin Wilck c92e2f04b3 block: disk_events: introduce event flags
Currently, an empty disk->events field tells the block layer not to
forward media change events to user space. This was done in commit
7c88a168da ("block: don't propagate unlisted DISK_EVENTs to userland")
in order to avoid events from "fringe" drivers to be forwarded to user
space. By doing so, the block layer lost the information which events
were supported by a particular block device, and most importantly,
whether or not a given device supports media change events at all.

Prepare for not interpreting the "events" field this way in the future
any more. This is done by adding an additional field "event_flags" to
struct gendisk, and two flag bits that can be set to have the device
treated like one that had the "events" field set to a non-zero value
before. This applies only to the sd and sr drivers, which are changed to
set the new flags.

The new flags are DISK_EVENT_FLAG_POLL to enforce polling of the device
for synchronous events, and DISK_EVENT_FLAG_UEVENT to tell the
blocklayer to generate udev events from kernel events.

In order to add the event_flags field to struct gendisk, the events
field is converted to an "unsigned short"; it doesn't need to hold
values bigger than 2 anyway.

This patch doesn't change behavior.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-12 13:35:24 -06:00
Christoph Hellwig 72deb455b5 block: remove CONFIG_LBDAF
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures.  These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time.  Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.

Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06 10:48:35 -06:00
Martin K. Petersen 1d5de5bd31 scsi: sd: Quiesce warning if device does not report optimal I/O size
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple
of physical block size") split one conditional into several separate
statements in an effort to provide more accurate warning messages when
a device reports a nonsensical value. However, this reorganization
accidentally dropped the precondition of the reported value being
larger than zero. This lead to a warning getting emitted on devices
that do not report an optimal I/O size at all.

Remain silent if a device does not report an optimal I/O size.

Fixes: a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of physical block size")
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Reported-by: Hussam Al-Tayeb <ht990332@gmx.com>
Tested-by: Hussam Al-Tayeb <ht990332@gmx.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:21:38 -04:00
Bart Van Assche c14a572643 scsi: sd: Fix a race between closing an sd device and sd I/O
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and
hence needs the disk->private_data pointer. Avoid that that pointer is
cleared before all affected I/O requests have finished. This patch avoids
that the following crash occurs:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
 scsi_mq_uninit_cmd+0x1c/0x30
 scsi_end_request+0x7c/0x1b8
 scsi_io_completion+0x464/0x668
 scsi_finish_command+0xbc/0x160
 scsi_eh_flush_done_q+0x10c/0x170
 sas_scsi_recover_host+0x84c/0xa98 [libsas]
 scsi_error_handler+0x140/0x5b0
 kthread+0x100/0x12c
 ret_from_fork+0x10/0x18

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:21:38 -04:00
Bart Van Assche d16ece577b scsi: sd: Inline sd_probe_part2()
Make sd_probe() easier to read by inlining sd_probe_part2(). This patch
does not change any functionality.

Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:04:52 -04:00
Bart Van Assche 21e6ba3f0e scsi: sd: Rely on the driver core for asynchronous probing
As explained during the 2018 LSF/MM session about increasing SCSI disk
probing concurrency, the problems with the current probing approach are as
follows:

- The driver core is unaware of asynchronous SCSI LUN probing.
  wait_for_device_probe() waits for all asynchronous probes except
  asynchronous SCSI disk probes.

- There is unnecessary serialization between sd_probe() and sd_remove().
  This can lead to a deadlock.

Hence this patch that modifies the sd driver such that it uses the driver
core framework for asynchronous probing. The async domains and
get_device()/put_device() pairs that became superfluous due to this change
are removed.

This patch does not affect the time needed for loading the scsi_debug
kernel module with parameters delay=0 and max_luns=256.

This patch depends on commit ef0ff68351 ("driver core: Probe devices
asynchronously instead of the driver") that went upstream in kernel version
v5.1-rc1.

Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:03:58 -04:00
Linus Torvalds 92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Martin K. Petersen a83da8a450 scsi: sd: Optimal I/O size should be a multiple of physical block size
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of
0xFFFF blocks. That looks bogus, especially for a device with a
4096-byte physical block size.

Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's
reported physical block size.

To make the sanity checking conditionals more readable--and to
facilitate printing warnings--relocate the checking to a helper
function. No functional change aside from the printks.

Cc: <stable@vger.kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-26 10:08:36 -05:00
James Bottomley e4a056987c scsi: sd: fix entropy gathering for most rotational disks
The problem is that the default for MQ is not to gather entropy, whereas
the default for the legacy queue was always to gather it.  The original
attempt to fix entropy gathering for rotational disks under MQ added an
else branch in sd_read_block_characteristics().  Unfortunately, the entire
check isn't reached if the device has no characteristics VPD page.  Since
this page was only introduced in SBC-3 and its optional anyway, most less
expensive rotational disks don't have one, meaning they all stopped
gathering entropy when we made MQ the default.  In a wholly unrelated
change, openssl and openssh won't function until the random number
generator is initialised, meaning lots of people have been seeing large
delays before they could log into systems with default MQ kernels due to
this lack of entropy, because it now can take tens of minutes to initialise
the kernel random number generator.

The fix is to set the non-rotational and add-randomness flags
unconditionally early on in the disk initialization path, so they can be
reset only if the device actually reports being non-rotational via the VPD
page.

Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Fixes: 83e32a5910 ("scsi: sd: Contribute to randomness when running rotational device")
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-12 22:18:26 -05:00
Bart Van Assche 80f82c169b scsi: sd: Remove superfluous residual assignments
Since commit 26e85fcd15 ("[SCSI] sd: Permit merged discard requests";
kernel v3.10) sd_done() sets the residual not only for failed special
requests but also for special requests that succeeded. Hence remove the
code from functions called by sd_init_command() that sets the residual.
This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-12 11:13:41 -05:00
Christoph Hellwig 69ed175c19 scsi: block: remove req->special
No users left.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05 21:30:09 -05:00
Damien Le Moal d7e6db2094 scsi: sd: Improve sd_print_capacity()
There is no need to call twice string_get_size() when the capacity messages
are not going to be printed. Reverse the message output condition to return
early and avoid executing string_get_size() when it is not necessary.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-04 22:07:24 -05:00
Bart Van Assche db5db4b91c scsi: sd: Protect against READ(6) or WRITE(6) with zero block transfer length
Since the READ(6) and WRITE(6) commands interpret a zero in the transfer
length field in the CDB as 256 logical blocks, avoid submitting such
commands.

Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29 00:49:23 -05:00
Bart Van Assche cf64e5a5f6 scsi: sd: Rename 'SCpnt' into 'cmd'
This patch makes the source code more uniform and does not change any
functionality.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: extracted this patch from a larger patch ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
Martin K. Petersen e249e42d27 scsi: sd: Clean up sd_setup_read_write_cmnd()
Rework sd_setup_read_write_cmnd() so it becomes more readable. Put all the
sanity checking at the head of the function and sanitize the logged error
messages. Move the legacy SCSI logging calls to the end of the functions
and reduce conditional nesting.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
Martin K. Petersen 78a02f49d0 scsi: sd: Create helper functions for read/write commands
Create a helper function for each of the 6, 10, 16 and 32-byte READ/WRITE
variants and use those when setting up reads and writes.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 and made
  function names shorter. ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
Martin K. Petersen ec029758a1 scsi: sd: Simplify misaligned I/O check
Avoid open coding the checks for the supported logical block sizes and use
a mask to check for misaligned I/O. Use our helper functions to scale lba
and block count.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
Martin K. Petersen c6c93fdd34 scsi: sd: Be consistent about blocks vs. sectors
We have had several bugs due mixing sector and logical block size
terminology. In the block layer, a sector is a 512-byte unit regardless of
the logical block size of the underlying device. But the term "sector" is
still widely used in sd.c when referring to logical block sized units.

We previously introduced helper functions such as sectors_to_logical() and
logical_to_sectors() to make the distinction clear. Use these to make the
code in sd.c consistent wrt. logical blocks and block layer sectors.

Use "lba" to describe a logical block address and "nr_blocks" when counting
logical blocks. SBC uses "TRANSFER LENGTH" to describe the latter but this
term was avoided to prevent confusion with the very similar DMA transfer
size (->transfersize) which is counted in bytes.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: ported this patch from kernel v4.11 to kernel v5.0 ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
Bart Van Assche 84f7a9de06 scsi: sd: Remove a local variable
This patch does not change any functionality.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ bvanassche: extracted this patch from a larger patch ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:27 -05:00
John Garry 082c2cd203 scsi: sd: Make protection lookup tables static and relocate functions
Currently the protection lookup tables in sd_prot_flag_mask() and
sd_prot_op() are declared as non-static. As such, they will be rebuilt for
each respective function call.

Optimise by making them static.

This saves ~100B object code for sd.c:

Before:
   text	   data	    bss	    dec	    hex	filename
  25403	   1024	     16	  26443	   674b	drivers/scsi/sd.o

After:
  text	   data	    bss	    dec	    hex	filename
  25299	   1024	     16	  26339	   66e3	drivers/scsi/sd.o

In addition, since those same functions are declared in sd.h, but each are
only referenced in sd.c, relocate them to that same c file.

The inline specifier is dropped also, since gcc should be able to make the
decision to inline.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08 22:29:32 -05:00
Ivan Mironov 44759979a4 scsi: sd: Fix cache_type_store()
Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may
fail if device responds to MODE SENSE command with DPOFUA flag set, and
then checks this flag to be not set on MODE SELECT command.

In this scenario, when trying to change cache_type, write always fails:

	# echo "none" >cache_type
	bash: echo: write error: Invalid argument

And following appears in dmesg:

	[13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current]
	[13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list

From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC
PARAMETER field in the mode parameter header:
	...
	The write protect (WP) bit for mode data sent with a MODE SELECT
	command shall be ignored by the device server.
	...
	The DPOFUA bit is reserved for mode data sent with a MODE SELECT
	command.
	...

The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved
and shall be set to zero.

[mkp: shuffled commentary to commit description]

Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08 21:57:25 -05:00
Linus Torvalds 0e9da3fbf7 for-4.21/block-20181221
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlwb7R8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjiID/97oDjMhNT7rwpuMbHw855h62j1hEN/m+N3
 FI0uxivYoYZLD+eJRnMcBwHlKjrCX8iJQAcv9ffI3ThtFW7dnZT3atUacaZVR/Dt
 IrxdymdBP3qsmuaId5NYBug7rJ+AiqFJKjEvCcSPu5X397J4I3SEbzhfvYLJ/aZX
 16o0HJlVVIrcbmq1IP4HwiIIOaKXvPaw04L4z4fpeynRSWG7EAi8NLSnhlR4Rxbb
 BTiMkCTsjRCFdyO6da4fvNQKWmPGPa3bJkYy3qR99cvJCeIbQjRyCloQlWNJRRgi
 3eJpCHVxqFmN0/+DNTJVQEEr4H8o0AVucrLVct1Jc4pessenkpoUniP8vELqwlng
 Z2VHLkhTfCEmvFlk82grrYdNvGATRsrbswt/PlP4T7rBfr1IpDk8kXDWF59EL2dy
 ly35Sk3wJGHBl8qa+vEPXOAnaWdqJXuVGpwB4ifOIatOls8mOxwfZjiRc7x05/fC
 1O4rR2IfLwRqwoYHs0AJ+h6ohOSn1mkGezl2Tch1VSFcJUOHmuYvraTaUi6hblpA
 SslaAoEhO39hRBL0HsvsMeqVWM9uzqvFkLDCfNPdiA81H1258CIbo4vF8z6czCIS
 eeXnTJxVhPVbZgb3a1a93SPwM6KIDZFoIijyd+NqjpU94thlnhYD0QEcKJIKH7os
 2p4aHs6ktw==
 =TRdW
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "This is the main pull request for block/storage for 4.21.

  Larger than usual, it was a busy round with lots of goodies queued up.
  Most notable is the removal of the old IO stack, which has been a long
  time coming. No new features for a while, everything coming in this
  week has all been fixes for things that were previously merged.

  This contains:

   - Use atomic counters instead of semaphores for mtip32xx (Arnd)

   - Cleanup of the mtip32xx request setup (Christoph)

   - Fix for circular locking dependency in loop (Jan, Tetsuo)

   - bcache (Coly, Guoju, Shenghui)
      * Optimizations for writeback caching
      * Various fixes and improvements

   - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
      * host and target support for NVMe over TCP
      * Error log page support
      * Support for separate read/write/poll queues
      * Much improved polling
      * discard OOM fallback
      * Tracepoint improvements

   - lightnvm (Hans, Hua, Igor, Matias, Javier)
      * Igor added packed metadata to pblk. Now drives without metadata
        per LBA can be used as well.
      * Fix from Geert on uninitialized value on chunk metadata reads.
      * Fixes from Hans and Javier to pblk recovery and write path.
      * Fix from Hua Su to fix a race condition in the pblk recovery
        code.
      * Scan optimization added to pblk recovery from Zhoujie.
      * Small geometry cleanup from me.

   - Conversion of the last few drivers that used the legacy path to
     blk-mq (me)

   - Removal of legacy IO path in SCSI (me, Christoph)

   - Removal of legacy IO stack and schedulers (me)

   - Support for much better polling, now without interrupts at all.
     blk-mq adds support for multiple queue maps, which enables us to
     have a map per type. This in turn enables nvme to have separate
     completion queues for polling, which can then be interrupt-less.
     Also means we're ready for async polled IO, which is hopefully
     coming in the next release.

   - Killing of (now) unused block exports (Christoph)

   - Unification of the blk-rq-qos and blk-wbt wait handling (Josef)

   - Support for zoned testing with null_blk (Masato)

   - sx8 conversion to per-host tag sets (Christoph)

   - IO priority improvements (Damien)

   - mq-deadline zoned fix (Damien)

   - Ref count blkcg series (Dennis)

   - Lots of blk-mq improvements and speedups (me)

   - sbitmap scalability improvements (me)

   - Make core inflight IO accounting per-cpu (Mikulas)

   - Export timeout setting in sysfs (Weiping)

   - Cleanup the direct issue path (Jianchao)

   - Export blk-wbt internals in block debugfs for easier debugging
     (Ming)

   - Lots of other fixes and improvements"

* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
  kyber: use sbitmap add_wait_queue/list_del wait helpers
  sbitmap: add helpers for add/del wait queue handling
  block: save irq state in blkg_lookup_create()
  dm: don't reuse bio for flushes
  nvme-pci: trace SQ status on completions
  nvme-rdma: implement polling queue map
  nvme-fabrics: allow user to pass in nr_poll_queues
  nvme-fabrics: allow nvmf_connect_io_queue to poll
  nvme-core: optionally poll sync commands
  block: make request_to_qc_t public
  nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
  nvme-tcp: fix endianess annotations
  nvmet-tcp: fix endianess annotations
  nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
  nvme-pci: only set nr_maps to 2 if poll queues are supported
  nvmet: use a macro for default error location
  nvmet: fix comparison of a u16 with -1
  blk-mq: enable IO poll if .nr_queues of type poll > 0
  blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
  blk-mq: skip zero-queue maps in blk_mq_map_swqueue
  ...
2018-12-28 13:19:59 -08:00
Jens Axboe 61cce6f6ee scsi: sd: use mempool for discard special page
When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in sd. If we fail allocating the special page, we return
busy, and it'll get retried. But since ordering is honored for dispatch
requests, we can keep retrying this same IO and failing. Behind that IO
could be requests that want to free memory, but they never get the
chance. This means you get repeated spews of traces like this:

[1201401.625972] Call Trace:
[1201401.631748]  dump_stack+0x4d/0x65
[1201401.639445]  warn_alloc+0xec/0x190
[1201401.647335]  __alloc_pages_slowpath+0xe84/0xf30
[1201401.657722]  ? get_page_from_freelist+0x11b/0xb10
[1201401.668475]  ? __alloc_pages_slowpath+0x2e/0xf30
[1201401.679054]  __alloc_pages_nodemask+0x1f9/0x210
[1201401.689424]  alloc_pages_current+0x8c/0x110
[1201401.699025]  sd_setup_write_same16_cmnd+0x51/0x150
[1201401.709987]  sd_init_command+0x49c/0xb70
[1201401.719029]  scsi_setup_cmnd+0x9c/0x160
[1201401.727877]  scsi_queue_rq+0x4d9/0x610
[1201401.736535]  blk_mq_dispatch_rq_list+0x19a/0x360
[1201401.747113]  blk_mq_sched_dispatch_requests+0xff/0x190
[1201401.758844]  __blk_mq_run_hw_queue+0x95/0xa0
[1201401.768653]  blk_mq_run_work_fn+0x2c/0x30
[1201401.777886]  process_one_work+0x14b/0x400
[1201401.787119]  worker_thread+0x4b/0x470
[1201401.795586]  kthread+0x110/0x150
[1201401.803089]  ? rescuer_thread+0x320/0x320
[1201401.812322]  ? kthread_park+0x90/0x90
[1201401.820787]  ? do_syscall_64+0x53/0x150
[1201401.829635]  ret_from_fork+0x29/0x40

Ensure that the discard page allocation has a mempool backing, so we
know we can make progress.

Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-12 20:11:54 -05:00
Christoph Hellwig 159b2cbf59 scsi: return blk_status_t from scsi_init_io and ->init_command
Replace the old BLKPREP_* values with the BLK_STS_ ones that they are
converted to later anyway.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 19:17:14 -07:00
Damien Le Moal bf50545696 block: Introduce blk_revalidate_disk_zones()
Drivers exposing zoned block devices have to initialize and maintain
correctness (i.e. revalidate) of the device zone bitmaps attached to
the device request queue (seq_zones_bitmap and seq_zones_wlock).

To simplify coding this, introduce a generic helper function
blk_revalidate_disk_zones() suitable for most (and likely all) cases.
This new function always update the seq_zones_bitmap and seq_zones_wlock
bitmaps as well as the queue nr_zones field when called for a disk
using a request based queue. For a disk using a BIO based queue, only
the number of zones is updated since these queues do not have
schedulers and so do not need the zone bitmaps.

With this change, the zone bitmap initialization code in sd_zbc.c can be
replaced with a call to this function in sd_zbc_read_zones(), which is
called from the disk revalidate block operation method.

A call to blk_revalidate_disk_zones() is also added to the null_blk
driver for devices created with the zoned mode enabled.

Finally, to ensure that zoned devices created with dm-linear or
dm-flakey expose the correct number of zones through sysfs, a call to
blk_revalidate_disk_zones() is added to dm_table_set_restrictions().

The zone bitmaps allocated and initialized with
blk_revalidate_disk_zones() are freed automatically from
__blk_release_queue() using the block internal function
blk_queue_free_zone_bitmaps().

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25 11:17:40 -06:00
Christoph Hellwig e76239a374 block: add a report_zones method
Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.

sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.

For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25 11:17:40 -06:00
Jens Axboe c0aac682fa This is the 4.19-rc6 release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAluw4MIACgkQONu9yGCS
 aT7+8xAAiYnc4khUsxeInm3z44WPfRX1+UF51frTNSY5C8Nn5nvRSnTUNLuKkkrz
 8RbwCL6UYyJxF9I/oZdHPsPOD4IxXkQY55tBjz7ZbSBIFEwYM6RJMm8mAGlXY7wq
 VyWA5MhlpGHM9DjrguB4DMRipnrSc06CVAnC+ZyKLjzblzU1Wdf2dYu+AW9pUVXP
 j4r74lFED5djPY1xfqfzEwmYRCeEGYGx7zMqT3GrrF5uFPqj1H6O5klEsAhIZvdl
 IWnJTU2coC8R/Sd17g4lHWPIeQNnMUGIUbu+PhIrZ/lDwFxlocg4BvarPXEdzgYi
 gdZzKBfovpEsSu5RCQsKWG4IGQxY7I1p70IOP9eqEFHZy77qT1YcHVAWrK1Y/bJd
 UA08gUOSzRnhKkNR3+PsaMflUOl9WkpyHECZu394cyRGMutSS50aWkavJPJ/o1Qi
 D/oGqZLLcKFyuNcchG+Met1TzY3LvYEDgSburqwqeUZWtAsGs8kmiiq7qvmXx4zV
 IcgM8ERqJ8mbfhfsXQU7hwydIrPJ3JdIq19RnM5ajbv2Q4C/qJCyAKkQoacrlKR4
 aiow/qvyNrP80rpXfPJB8/8PiWeDtAnnGhM+xySZNlw3t8GR6NYpUkIzf5TdkSb3
 C8KuKg6FY9QAS62fv+5KK3LB/wbQanxaPNruQFGe5K1iDQ5Fvzw=
 =dMl4
 -----END PGP SIGNATURE-----

Merge tag 'v4.19-rc6' into for-4.20/block

Merge -rc6 in, for two reasons:

1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
   they aren't in the 4.20 branch.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

* tag 'v4.19-rc6': (780 commits)
  Linux 4.19-rc6
  MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
  cpufreq: qcom-kryo: Fix section annotations
  perf/core: Add sanity check to deal with pinned event failure
  xen/blkfront: correct purging of persistent grants
  Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
  selftests/powerpc: Fix Makefiles for headers_install change
  blk-mq: I/O and timer unplugs are inverted in blktrace
  dax: Fix deadlock in dax_lock_mapping_entry()
  x86/boot: Fix kexec booting failure in the SEV bit detection code
  bcache: add separate workqueue for journal_write to avoid deadlock
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  xen/blkfront: When purging persistent grants, keep them in the buffer
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  block: fix deadline elevator drain for zoned block devices
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  ...

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01 08:58:57 -06:00
Hannes Reinecke fef912bf86 block: genhd: add 'groups' argument to device_add_disk
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().

Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:28 -06:00
Bart Van Assche bca6b067b0 block: Move power management code into a new source file
Move the code for runtime power management from blk-core.c into the
new source file blk-pm.c. Move the corresponding declarations from
<linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out
the declarations of the functions that are not used in that mode.
This patch not only reduces the number of #ifdefs in the block layer
core code but also reduces the size of header file <linux/blkdev.h>
and hence should help to reduce the build time of the Linux kernel
if CONFIG_PM is not defined.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26 15:11:28 -06:00
Johannes Thumshirn f1f1fadaca scsi: sd: don't crash the host on invalid commands
When sd_init_command() get's a command with a unknown req_op() it crashes the
system via BUG().

This makes debugging the actual reason for the broken request cmd_flags pretty
hard as the system is down before it's able to write out debugging data on the
serial console or the trace buffer.

Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and
return an I/O error to the producer of the request.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21 12:42:57 -04:00
Xuewei Zhang 83e32a5910 scsi: sd: Contribute to randomness when running rotational device
Currently a scsi device won't contribute to kernel randomness when it uses
blk-mq. Since we commonly use scsi on rotational device with blk-mq, it make
sense to keep contributing to kernel randomness in these cases. This is
especially important for virtual machines.

commit b5b6e8c8d3 ("scsi: virtio_scsi: fix IO hang caused by automatic irq
vector affinity") made all virtio-scsi device to use blk-mq, which does not
contribute to randomness today. So for a virtual machine only having
virtio-scsi disk (which is common), it will simple stop getting randomness
from its disks in today's implementation.

With this patch, if the above VM has rotational virtio-scsi device, then it
can still benefit from the entropy generated from the disk.

Reported-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Xuewei Zhang <xueweiz@google.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17 02:57:10 -04:00
Linus Torvalds aba16dc5cf Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax
Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...
2018-08-26 11:48:42 -07:00
Matthew Wilcox 9401508012 sd: Convert to new IDA API
Allows us to remove an explicit spinlock.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-21 23:54:17 -04:00
Linus Torvalds 72f02ba66b SCSI misc on 20180815
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
 hisi_sas, smartpqi, megaraid_sas, arcmsr.  In addition, with the
 continuing absence of Nic we have target updates for tcmu and target
 core (all with reviews and acks).  The biggest observable change is
 going to be that we're (again) trying to switch to mulitqueue as the
 default (a user can still override the setting on the kernel command
 line).  Other major core stuff is the removal of the remaining
 Microchannel drivers, an update of the internal timers and some
 reworks of completion and result handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
 dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
 o/JckEZZpIp+5NySZNc=
 =ggLB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...
2018-08-15 22:06:26 -07:00
Max Gurtovoy 10c41ddd61 block: move dif_prepare/dif_complete functions to block layer
Currently these functions are implemented in the scsi layer, but their
actual place should be the block layer since T10-PI is a general data
integrity feature that is used in the nvme protocol as well. Also, use
the tuple size from the integrity profile since it may vary between
integrity types.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-30 08:27:02 -06:00
Bart Van Assche 2b33ab371e scsi: sd: Remove a superfluous assignment
Since blk_rq_bytes(req) returns req->__data_len, assigning that value to
req->__data_len is superfluous. Hence remove that assignment.

See also commit 5db44863b6 ("[SCSI] sd: Implement support for WRITE SAME").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:34:43 -04:00
Johannes Thumshirn c65be1a63f scsi: core: check for equality of result byte values
When evaluating a SCSI command's result using the field access macros,
check for equality of the fields and not if a specific bit is set.

This is a preparation patch, for reworking the results field in the
SCSI command.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Mahesh Rajashekhara 505aa4b6a8 scsi: sd: Defer spinning up drive while SANITIZE is in progress
A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ
0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS").

Prevent spinning up the drive until this condition clears.

[mkp: tweaked commit message]

Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-18 23:37:40 -04:00
Linus Torvalds 3526dd0c78 for-4.17/block-20180402
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJawr05AAoJEPfTWPspceCmT2UP/1uuaqwzyl4VjFNb/k7KS7UM
 +Cs/1HBlGomgMA8orDTGqtWqLRdR3z4RSh0+MvXTzQ78HpFVYz7CbDc9itHm+G9M
 X0ypD4kF/JGCFb5cxk+x6qv28uO2nv4DP3+0hHqJWLH4UVJBWDY6bs4BPShsf9QB
 I6XjioNMhoqylXgdOITLODJZz+TcChlJMDAqwhpJwh9TH1wjobleAZ6AdmCPfgi5
 h0UCKMUKzcVJlNZwQUrzrs2cxcx9Uhunnbz7HK0ZV4n/FKFtDpGynFpQQ71pZxKe
 Be0ZOBPCQvC3ykOM/egCIvC/e5y7FgrjORD6jxyu1PTwAugI5E1VYSMxHkXvgPAx
 zOo9A7RT4GPO2tDQv+DbzNFpqeSAclTgSmr+/y1wmheBs8DiSt7MPVBiNM4zdCNv
 NLk9z7IEjFhdmluSB/LbTb1aokypMb/q7QTLouPHdwGn80k7yrhFyLHgdjpNTQ2K
 UHfHZvGxkOX6SmFhBNOtIFUkuSceenh64a0RkRle7filx+ImpbCVm2/GYi9zZNCu
 EtctgzLbLmz40zMiyDaZS2bxBgGzfn6yf4xd9LsaAJPMhvZnmXogT0D9ctWXB0WU
 mMaS7sOkLnNjnGkzF1fHkeiZ/oigrstJbe+CA7BtOdwxpWn6MZBgKEoFQ6iA2b3X
 5J1axMgVH5LAsIEcEQVq
 =RVhK
 -----END PGP SIGNATURE-----

Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "It's a pretty quiet round this time, which is nice. This contains:

   - series from Bart, cleaning up the way we set/test/clear atomic
     queue flags.

   - series from Bart, fixing races between gendisk and queue
     registration and removal.

   - set of bcache fixes and improvements from various folks, by way of
     Michael Lyle.

   - set of lightnvm updates from Matias, most of it being the 1.2 to
     2.0 transition.

   - removal of unused DIO flags from Nikolay.

   - blk-mq/sbitmap memory ordering fixes from Omar.

   - divide-by-zero fix for BFQ from Paolo.

   - minor documentation patches from Randy.

   - timeout fix from Tejun.

   - Alpha "can't write a char atomically" fix from Mikulas.

   - set of NVMe fixes by way of Keith.

   - bsg and bsg-lib improvements from Christoph.

   - a few sed-opal fixes from Jonas.

   - cdrom check-disk-change deadlock fix from Maurizio.

   - various little fixes, comment fixes, etc from various folks"

* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
  blk-mq: Directly schedule q->timeout_work when aborting a request
  blktrace: fix comment in blktrace_api.h
  lightnvm: remove function name in strings
  lightnvm: pblk: remove some unnecessary NULL checks
  lightnvm: pblk: don't recover unwritten lines
  lightnvm: pblk: implement 2.0 support
  lightnvm: pblk: implement get log report chunk
  lightnvm: pblk: rename ppaf* to addrf*
  lightnvm: pblk: check for supported version
  lightnvm: implement get log report chunk helpers
  lightnvm: make address conversions depend on generic device
  lightnvm: add support for 2.0 address format
  lightnvm: normalize geometry nomenclature
  lightnvm: complete geo structure with maxoc*
  lightnvm: add shorten OCSSD version in geo
  lightnvm: add minor version to generic geometry
  lightnvm: simplify geometry structure
  lightnvm: pblk: refactor init/exit sequences
  lightnvm: Avoid validation of default op value
  lightnvm: centralize permission check for lightnvm ioctl
  ...
2018-04-05 14:27:02 -07:00
Linus Torvalds fd9adc402b SCSI fixes on 20180327
Two driver fixes (ibmvfc, iscsi_tcp) and a USB fix for devices that
 give the wrong return to Read Capacity and cause a huge log spew.  The
 remaining 5 patches all try to fix commit 84676c1f21
 "genirq/affinity: assign vectors to all possible CPUs") which broke
 the non-mq I/O path.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWrpSmyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishY+MAP9Zvin/
 AUc3xkvOPdIzRPp2aXQHJKC+NGmNFr6MiXIHiAD/TvjbkxEjbUTjnr+gZNaloDma
 d/I4i9xaBNSvqNJpzT0=
 =mLIX
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two driver fixes (ibmvfc, iscsi_tcp) and a USB fix for devices that
  give the wrong return to Read Capacity and cause a huge log spew.

  The remaining five patches all try to fix commit 84676c1f21
  ("genirq/affinity: assign vectors to all possible CPUs") which broke
  the non-mq I/O path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled
  scsi: sd: Remember that READ CAPACITY(16) succeeded
  scsi: ibmvfc: Avoid unnecessary port relogin
  scsi: virtio_scsi: unify scsi_host_template
  scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
  scsi: core: introduce force_blk_mq
  scsi: megaraid_sas: fix selection of reply queue
  scsi: hpsa: fix selection of reply queue
2018-03-27 14:11:46 -10:00
Martin K. Petersen 597d74005b scsi: sd: Remember that READ CAPACITY(16) succeeded
The USB storage glue sets the try_rc_10_first flag in an attempt to
avoid wedging poorly implemented legacy USB devices.

If the device capacity is too large to be expressed in the provided
response buffer field of READ CAPACITY(10), a well-behaved device will
set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a
READ CAPACITY(16) to obtain the real capacity.

Since this part of the discovery logic is not covered by the first_scan
flag, a warning will be printed a couple of times times per revalidate
attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16).

Remember that we have successfully issued READ CAPACITY(16) so we can
take the fast path on subsequent revalidate attempts.

Reported-by: Menion <menion@gmail.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19 23:23:04 -04:00
Linus Torvalds 0aa3fdb8b3 SCSI fixes on 20180314
This is four patches, consisting of one regression from the merge
 window (qla2xxx) one lonstanding memory leak (sd_zbc) one event queue
 mislabelling which we want to eliminate to discourage the pattern
 (mpt3sas) and one behaviour change because re-reading the partition
 table shouldn't clear the ro flag.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWqmwAyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXztAQCYs0s/
 oysGLnl2qkuSC8u7vzzLURfQ6l2MGq4ic8Y/mQD/ZgTvf9eGj5OhARcRk29D3XRJ
 zDY3KbkNIajadXlN3LY=
 =eu2i
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is four patches, consisting of one regression from the merge
  window (qla2xxx), one long-standing memory leak (sd_zbc), one event
  queue mislabelling which we want to eliminate to discourage the
  pattern (mpt3sas), and one behaviour change because re-reading the
  partition table shouldn't clear the ro flag"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Keep disk read-only when re-reading partition
  scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure
  scsi: sd_zbc: Fix potential memory leak
  scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
2018-03-14 17:02:49 -07:00
Bart Van Assche 8b904b5b6b block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()
This patch has been generated as follows:

for verb in set_unlocked clear_unlocked set clear; do
  replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
    $(git grep -lw queue_flag_${verb} drivers block/bsg*)
done

Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 14:13:48 -07:00
Jeremy Cline 20bd1d026a scsi: sd: Keep disk read-only when re-reading partition
If the read-only flag is true on a SCSI disk, re-reading the partition
table sets the flag back to false.

To observe this bug, you can run:

1. blockdev --setro /dev/sda
2. blockdev --rereadpt /dev/sda
3. blockdev --getro /dev/sda

This commit reads the disk's old state and combines it with the device
disk-reported state rather than unconditionally marking it as RW.

Reported-by: Li Ning <lining916740672@icloud.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06 22:07:49 -05:00
Linus Torvalds abbbd0211d SCSI postmerge on 20180202
This is a set of three patches that depended on mq and zone changes in
 the block tree (now upstream).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWnSq/iYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVRjAP4kVZ+d
 o2gd6CqfhQqdbps7bcGdDCTjxTVZd4w56zgRAAEA4xjO6lhPCGlGEwJVlSMmojCE
 rJuw2ITmWMX//V4iBmU=
 =YQ8Y
 -----END PGP SIGNATURE-----

Merge tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull second set of SCSI updates from James Bottomley:
 "This is a set of three patches that depended on mq and zone changes in
  the block tree (now upstream)"

* tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove zone write locking
  scsi: sd_zbc: Initialize device request queue zoned data
  scsi: scsi-mq-debugfs: Show more information
2018-02-03 13:07:56 -08:00
Linus Torvalds 28bc6fb959 SCSI misc on 20180131
This is mostly updates of the usual driver suspects: arcmsr,
 scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
 hisi_sas.  We also have a rework of the libsas hotplug handling to
 make it more robust, a slew of 32 bit time conversions and fixes, and
 a host of the usual minor updates and style changes.  The biggest
 potential for regressions is the libsas hotplug changes, but so far
 they seem stable under testing.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWnH+5SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWxuAP0UvuJp
 MNR/yU/wv/emSzOc48Ldwd7I0xD2XxSnloGUgwD+IGZZT5yNUQA1THCbm+en4hkB
 WvyBieQs9qRit+2czd4=
 =gJMf
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual driver suspects: arcmsr,
  scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
  hisi_sas.

  We also have a rework of the libsas hotplug handling to make it more
  robust, a slew of 32 bit time conversions and fixes, and a host of the
  usual minor updates and style changes. The biggest potential for
  regressions is the libsas hotplug changes, but so far they seem stable
  under testing"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
  scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
  scsi: arcmsr: avoid do_gettimeofday
  scsi: core: Add VENDOR_SPECIFIC sense code definitions
  scsi: qedi: Drop cqe response during connection recovery
  scsi: fas216: fix sense buffer initialization
  scsi: ibmvfc: Remove unneeded semicolons
  scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
  scsi: hisi_sas: directly attached disk LED feature for v2 hw
  scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
  scsi: megaraid_sas: NVMe passthrough command support
  scsi: megaraid: use ktime_get_real for firmware time
  scsi: fnic: use 64-bit timestamps
  scsi: qedf: Fix error return code in __qedf_probe()
  scsi: devinfo: fix format of the device list
  scsi: qla2xxx: Update driver version to 10.00.00.05-k
  scsi: qla2xxx: Add XCB counters to debugfs
  scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
  scsi: qla2xxx: Fix warning during port_name debug print
  scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  ...
2018-01-31 11:23:28 -08:00
Damien Le Moal 39051dd85f scsi: sd: Remove zone write locking
The block layer now handles zone write locking.

[mkp: removed SCMD_ZONE_WRITE_LOCK reference in scsi_debugfs]

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08 22:27:32 -05:00
Bart Van Assche 14e3062fb1 scsi: core: Fix a scsi_show_rq() NULL pointer dereference
Avoid that scsi_show_rq() triggers a NULL pointer dereference if called
after sd_uninit_command(). Swap the NULL pointer assignment and the
mempool_free() call in sd_uninit_command() to make it less likely that
scsi_show_rq() triggers a use-after-free. Note: even with these changes
scsi_show_rq() can trigger a use-after-free but that's a lesser evil
than e.g. suppressing debug information for T10 PI Type 2 commands
completely. This patch fixes the following oops:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: scsi_format_opcode_name+0x1a/0x1c0
CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516
Call Trace:
 __scsi_format_command+0x27/0xc0
 scsi_show_rq+0x5c/0xc0
 __blk_mq_debugfs_rq_show+0x116/0x130
 blk_mq_debugfs_rq_show+0xe/0x10
 seq_read+0xfe/0x3b0
 full_proxy_read+0x54/0x90
 __vfs_read+0x37/0x160
 vfs_read+0x96/0x130
 SyS_read+0x55/0xc0
 entry_SYSCALL_64_fastpath+0x1a/0xa5

[mkp: added Type 2]

Fixes: 0eebd005dd ("scsi: Implement blk_mq_ops.show_rq()")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-11 21:56:48 -05:00
Michał Mirosław 3a1d0783ac scsi: sd: add missing KERN_CONT for disk spin-up
KERN_CONT is now required for continued printks(). Add it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-04 22:56:02 -05:00
Linus Torvalds 670ffccb2f SCSI misc on 20171114
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
 megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
 updates.
 
 There's no major behaviour change or additions to the core in all of
 this, so the potential for regressions should be small (biggest
 potential being in the scsi error handler changes).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaCxtCAAoJEAVr7HOZEZN4d9EQAI+OHP6ss6zjKKC21c9jNPcH
 NhLrNv37gHg/LA2VXeUEL9RGUjCGLIUrI4HsrxzkFAMLKP4TkshMs8/2RvczY+Sa
 VpayPqVybEKLIS6ipQyM1SLIQff2nvtDVcN/T+8z1lkk45TrbA6ZGuwUwd2aJyEA
 2V2wtg51ObnL0Nr9QPPll0JrtL1AnCZyRlu9XrwTZuuSBZwk93opIuuvbZm/3dVg
 Ir4GSS4Y+PuHIfu4cxqdsPMdzRdY9I2me1YiE4jeFSn1/VTAjL4HBz7fO9eITT42
 VhXSpDz1XvFsa9dJ0ubkqoALpJzCfOcBw+EuGvSydLEvOBoEVwMccdfaD9lT1zc5
 L9e1Z5qqJoq7hTA6xTXCYfWG73I9HYvljtmc8yudKHhADOdnSTUXhaO6uBF0RNqD
 OxPSA1RZwRx3c6lDOcK6BTtvLAkTEuYKdrWSKJi0w+QXJAyQ6etqbmsKpmPdRim7
 Z4ZSpJFro2gyo9gcdJO0ykTG+z3U7Z/ay1sNgnuprsv+eU/QjUdlAPl18o79EkRf
 H54zZggZ4wC6q/cFVVt4Vx+V+oqIeu38s7NDXS9UltLoTZPm2EzDW6pXd/38Z4Tf
 a1oBAUET8kYLC90P8sVZxUIHZjITlpgDbyE2Lq00PMYXhk8S4IxF0aMN5RvVqzUv
 +7N2HrHkSSgG1nhw1t+E
 =3O85
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
  updates.

  There's no major behaviour change or additions to the core in all of
  this, so the potential for regressions should be small (biggest
  potential being in the scsi error handler changes)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: lpfc: Fix hard lock up NMI in els timeout handling.
  scsi: mpt3sas: remove a stray KERN_INFO
  scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
  scsi: aacraid: use timespec64 instead of timeval
  scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
  scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
  scsi: mpt3sas: fix dma_addr_t casts
  scsi: be2iscsi: Use kasprintf
  scsi: storvsc: Avoid excessive host scan on controller change
  scsi: lpfc: fix kzalloc-simple.cocci warnings
  scsi: mpt3sas: Update mpt3sas driver version.
  scsi: mpt3sas: Fix sparse warnings
  scsi: mpt3sas: Fix nvme drives checking for tlr.
  scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
  scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
  scsi: mpt3sas: scan and add nvme device after controller reset
  scsi: mpt3sas: Set NVMe device queue depth as 128
  scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
  scsi: mpt3sas: API's to remove nvme drive from sml
  scsi: mpt3sas: API 's to support NVMe drive addition to SML
  ...
2017-11-14 16:23:44 -08:00
weiping zhang 623401ee33 scsi: sd: change manage_start_stop to bool in sysfs interface
/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17 01:26:25 -04:00
weiping zhang 658e9a6dc1 scsi: sd: change allow_restart to bool in sysfs interface
/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:

echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17 01:26:03 -04:00
Martin K. Petersen 77082ca503 scsi: sd: Do not override max_sectors_kb sysfs setting
A user may lower the max_sectors_kb setting in sysfs to accommodate
certain workloads. Previously we would always set the max I/O size to
either the block layer default or the optional preferred I/O size
reported by the device.

Keep the current heuristics for the initial setting of max_sectors_kb.
For subsequent invocations, only update the current queue limit if it
exceeds the capabilities of the hardware.

Cc: <stable@vger.kernel.org>
Reported-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02 22:16:25 -04:00
Martin K. Petersen 28a0bc4120 scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
SBC-4 states:

  "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the
   maximum number of LBAs that may be unmapped by an UNMAP command"

  "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates
   the maximum number of contiguous logical blocks that the device server
   allows to be unmapped or written in a single WRITE SAME command."

Despite the spec being clear on the topic, some devices incorrectly
expect WRITE SAME commands with the UNMAP bit set to be limited to the
value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD.

Implement a blacklist option that can be used to accommodate devices
with this behavior.

Cc: <stable@vger.kernel.org>
Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com>
Reported-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02 22:16:18 -04:00
Damien Le Moal b7af62a945 scsi: sd: Align maximum write same blocks to physical block size
Reporting a maximum number of blocks that is not aligned on the device
physical size would cause a large write same request to be split into
physically unaligned chunks by __blkdev_issue_write_zeroes() and
__blkdev_issue_write_same(), even if the caller of these functions took
care to align its request to physical sectors.

Make sure the maximum reported is aligned to the device physical block
size. This is only an optional optimization for regular disks, but this
is mandatory to avoid failure of large write same requests directed at
sequential write required zones of host-managed ZBC disks.

[mkp: tweaked commit message]

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-25 15:36:40 -04:00
Lukas Czerner 9c95be0163 scsi: sd: Remove unnecessary condition in sd_read_block_limits()
After series of changes around WRITE_SAME and UNMAP setup we ended up
with leftover unnecessary condition. Remove it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15 15:14:28 -04:00
James Bottomley 2441500a41 Merge branch 'fixes' into misc 2017-09-07 12:12:43 -07:00
weiping zhang 5f800c87da scsi: sd: remove duplicated setting of gd->minors
gd->minors has been set when call alloc_disk() in sd_probe.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:26:08 -04:00
Bart Van Assche 830cc351bc scsi: sd: Remove a useless comparison
This patch avoids that gcc reports the following warning when
building with W=1:

drivers/scsi/sd.c:315:10: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION)

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:08:08 -04:00
Bart Van Assche ed91f7ed38 scsi: sd: Fix indentation
This patch avoids that smatch reports the following:

drivers/scsi/sd.c:3540: sd_suspend_common() warn: inconsistent indenting

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:08:08 -04:00
Bart Van Assche 0624cbb1e2 scsi: sd: sr: Convert two assignments into warning statements
Before scsi_prep_fn() calls the ULP .init_command() callback
function it stores the SCSI command pointer in request.special.
This means that the SCpnt = rq->special assignments in the sd
and sr drivers assign a pointer to itself. Hence convert these
two assignment statements into warning statements.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25 17:08:08 -04:00
Damien Le Moal 70e42fd02c scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
Releasing a zone write lock only when the write commnand that acquired
the lock completes can cause deadlocks due to potential command
reordering if the lock owning request is requeued and not executed. This
problem exists only with the scsi-mq path as, unlike the legacy path,
requests are moved out of the dispatch queue before being prepared and
so before locking a zone for a write command.

Since sd_uninit_cmnd() is now always called when a request is requeued,
call sd_zbc_write_unlock_zone() from that function for write requests
that acquired a zone lock instead of from sd_done(). Acquisition of a zone
lock by a write command is indicated using the new command
flag SCMD_ZONE_WRITE_LOCK.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-16 20:01:31 -04:00
Linus Torvalds 9031114841 SCSI misc on 20170704
This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
 qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
 a host of minor and miscellaneous changes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZW7JMAAoJEAVr7HOZEZN4IM4P/AqBtvH+6Lo1Eb+3A/HnHskK
 hIxVxgBxaw3fhW5AegDfVCvrdVTTEkCB/g5CIKN8NCWEx6OGmCX0Lu6lnjld9BOZ
 cTlPtzNwFGlgHrz34LwCc3vlc5ovMpTQBrpGAQpGGWoAZIP+c3ilEihIYTEMNCsN
 dmjI71AigDE5g6X1OT361IJ1gydkjfG41IcRe/jlMtEgRNdy3B2JVIdATL89Pw4b
 0uZO3uUTn8EGEKUdyJZCNpie7sGZv8u2LhA+Znby2C4h3bwWNV/d0p7ped4xrQY5
 yVpZEUbYVdcOOYBgeBJlfwOhvjRQTdxeK4d7W9XTb+AQf30F3DgSepdMCdf3BjVt
 KnQvBOTxyidB8xsCL46wlxxNew3qoUtaKoY88WUOOnnJwU5U7hlRtPkf/eO2i5QF
 +k7fxUpFfkBTS4I2gXnyGWpmSoxwJerd0knojSOjrjJcAlcgM65+pocUAea/0Dpr
 SsfL2sTb12gk6bkF9UlRv8/4aSsWYb92WW1nbTt2nFRXncPNN5Qzc3lGj//36O+b
 2bka+aSKVAFoNAnQ1pUE8EJxSboy5q7y4509iZzO/Fom+pVuzBROm5fmrpcOE5dP
 IjW7gqSFB6578tnNiK049rrrPja5wkUa+Ptc8s0FjPAVyIDrp2RN+f2nljOBBhW8
 3Z1nXMG0eFqvb5taLtfZ
 =D9QX
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
  qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
  a host of minor and miscellaneous changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits)
  qla2xxx: Fix NVMe entry_type for iocb packet on BE system
  scsi: qla2xxx: avoid unused-function warning
  scsi: snic: fix a couple of spelling mistakes/typos
  scsi: qla2xxx: fix a bunch of typos and spelling mistakes
  scsi: lpfc: don't double count abort errors
  scsi: lpfc: spin_lock_irq() is not nestable
  scsi: hisi_sas: optimise DMA slot memory
  scsi: ibmvfc: constify dev_pm_ops structures.
  scsi: ibmvscsi: constify dev_pm_ops structures.
  scsi: cxlflash: Update debug prints in reset handlers
  scsi: cxlflash: Update send_tmf() parameters
  scsi: cxlflash: Avoid double free of character device
  scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
  scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
  scsi: ufs: flush eh_work when eh_work scheduled.
  scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock
  scsi: sun_esp: fix device reference leaks
  scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init
  scsi: fnic: correct speed display and add support for 25,40 and 100G
  scsi: fnic: added timestamp reporting in fnic debug stats
  ...
2017-07-06 12:10:33 -07:00
Linus Torvalds 109a5db504 Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Christoph added support for TCG OPAL self encrypting disks

 - Minwoo added support for ATA PASS-THROUGH(32)

 - Linus Walleij removed spurious drvdata assignments in some drivers

 - Support for a few new device and other fixes

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits)
  sd: add support for TCG OPAL self encrypting disks
  libata: fix build warning from unused goto label
  libata: Support for an ATA PASS-THROUGH(32) command.
  ahci: Add Device ID for ASMedia 1061R and 1062R
  sata_via: Enable optional hotplug on VT6420
  ata: ahci_brcm: Avoid writing to read-only registers
  libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag
  libata: Add the AHCI_HFLAG_YES_ALPM flag
  ata: ftide010: fix resource printing
  libata: make the function name in comment match the actual function
  ata: sata_rcar: make of_device_ids const.
  ata: pata_octeon_cf: make of_device_ids const.
  libata: Convert bare printks to pr_cont
  libahci: wrong comments in ahci_do_softreset()
  ata: declare ata_port_info structures as const
  ata: Add driver for Faraday Technology FTIDE010
  ata: Add DT bindings for the Gemini SATA bridge
  ata: Add DT bindings for Faraday Technology FTIDE010
  libata: implement SECURITY PROTOCOL IN/OUT
  libata: factor out a ata_identify_page_supported helper
  ...
2017-07-06 09:41:58 -07:00
Christoph Hellwig d80210f25f sd: add support for TCG OPAL self encrypting disks
Just wire up the generic TCG OPAL infrastructure to the SCSI disk driver
and the Security In/Out commands.

Note that I don't know of any actual SCSI disks that do support TCG OPAL,
but this is required to support ATA disks through libata.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-29 10:21:15 -04:00
Martin K. Petersen 4c11712ad0 scsi: sd: Use sysfs_match_string()
Avoid unnecessary snprintf() when formatting variables for display in
sysfs and switch to sysfs_match_string() for validating user input.

Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:00:58 -04:00
Bart Van Assche 0db6ca8a5e scsi: Protect SCSI device state changes with a mutex
Serializing SCSI device state changes avoids that two state changes can
occur concurrently, e.g. the state changes in scsi_target_block() and
__scsi_remove_device(). This serialization is essential to make patch
"Make __scsi_remove_device go straight from BLOCKED to DEL" work
reliably.

Enable this mechanism for all scsi_target_*block() callers but not for
the scsi_internal_device_unblock() calls from the mpt3sas driver because
that driver can call scsi_internal_device_unblock() from atomic context.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:55:59 -04:00
Derek Basehore 4fa8324461 scsi: sd: Ignore sync cache failures when not supported
Some external hard drives don't support the sync command even though the
hard drive has write cache enabled. In this case, upon suspend request,
sync cache failures are ignored if the error code in the sense header is
ILLEGAL_REQUEST. There's not much we can do for these drives, so we
shouldn't fail to suspend for this error case. The drive may stay
powered if that's the setup for the port it's plugged into.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-16 21:07:24 -04:00
Damien Le Moal ed44fd7fd8 scsi: sd: Write lock zone for REQ_OP_WRITE_ZEROES
For a zoned block device, sd_zbc_complete() handles zone write unlock on
completion of a REQ_OP_WRITE_ZEROES command but the zone write locking
is missing from sd_setup_write_zeroes_cmnd(). This patch fixes this
problem by locking the target zone of a REQ_OP_WRITE_ZEROES request.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-11 23:11:49 -04:00
Damien Le Moal 29f6ca6916 scsi: sd: Unlock zone in case of error in sd_setup_write_same_cmnd()
scsi_io_init() may fail, leaving a zone of a zoned block device locked.
Fix this by properly unlocking the write same request target zone if
scsi_io_init() fails.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-11 23:10:03 -04:00
Linus Torvalds 8d5e72dfdf SCSI misc on 20170503
This update includes the usual round of major driver updates
 (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex).  There's also
 the usual amount of cosmetic and spelling stuff.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZClQkAAoJEAVr7HOZEZN4OmkP/j/JJx2ImGzTgil5S8yeSWPY
 5Gqb8IK9rCQ+OJgCZYCz3JsLZZnwY4ODZ9tC1lO/3he6VfjIhcEs2/eXbTnEfsZx
 D3EwWEVR3wYBNZN0d4hQoudVbdCf6UuvsUvM1hDFO7by10qFEs0DqsufccpDlpG/
 us96BWf7PgiNzHYSvZIlmsfEDzNDRRg7Dm1NuLOQvXw56zFGsrysCO6Tqg7/ScJm
 Unz/VlEe1DE7zE9QotsKNCht7xHkmn1vfuva1wqG2wMp7EHf0rKnavRYrWUrxiEy
 2ig6GpR7mIHmVHS8PAMNhyS6iNxGQ3e50sAvZdqDlq42P73AEwbrOo5YhgsTJxWT
 vCpRAzSuHwPOPY3W2Aa1yJ10iOpoPKxXs2xSZuzpcz8XJ3RjHy+l90Y0VT4Jrvzv
 +dSY1cynshFccZmw2HQanlt1Ly9G3U8xmx8KIbnsIPCdSIQaQQD27H+Ip0YZ0fKt
 aLmMcQzffma3UP/LPmRAQ45bwx8rLi9M3DWbWOGmSkIRY3etPCXqNuDcC6h5p9TF
 4W74oVcELTql/u8ATZNSbdHBsWAg3GATIkAgdqwLTk/CU/0OgGY8epILr3EM2bc6
 vVbglwP9DiyVOikTLhVNJdZA97qHjZ1WXNo03eefFTBfPDcUlkZw4j2gufGuNFh2
 5vA4C/aSl9uxaLInr3aC
 =kj7u
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...
2017-05-04 12:19:44 -07:00
Linus Torvalds 694752922b Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..
2017-05-01 10:39:57 -07:00
Damien Le Moal a90dfdc2de scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
Rename sd_zbc_setup_write_cmnd() to sd_zbc_write_lock_zone() to be clear
about what the function actually does. To be consistent, also rename
sd_zbc_cancel_write_cmnd() to sd_zbc_write_unlock_zone().

No functional change is introduced by this patch.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-25 13:00:57 -04:00
Christoph Hellwig d227ec267f scsi: sd: Cleanup sd_done sense data handling
Use a switch for the sense key, and remove two pointless variables that
are only used once.

[mkp: Added UNMAP comment and removed good_bytes based on comment from
Damien]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-25 13:00:39 -04:00
Damien Le Moal 6eadc61224 scsi: sd: Improve sd_completed_bytes
Re-shuffle the code to be more efficient by not initializing variables
upfront (i.e. do it only when necessary).  Also replace the do_div calls
with calls to sectors_to_logical().

No functional change is introduced by this patch.

[mkp: bytes_to_logical()]

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24 19:00:29 -04:00
Damien Le Moal 7529fbb008 scsi: sd: Fix function descriptions
Fix argument names and description of function documentation comments.
No functional change is introduced by this patch.

[mkp: verbify]

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24 18:38:30 -04:00
Linus Torvalds 403a39f8b0 SCSI fixes on 20170415
This is seven small fixes which are all for user visible issues that
 fortunately only occur in rare circumstances.  The most serious is the
 sr one in which QEMU can cause us to read beyond the end of a buffer
 (I don't think it's exploitable, but just in case).  The next is the
 sd capacity fix which means all non 512 byte sector drives greater
 than 2TB fail to be correctly sized.  The rest are either in new
 drivers (qedf) or on error legs.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJY8krDAAoJEAVr7HOZEZN4BpoQAKKwu5Y7jRS6JNoS94pT2L33
 Rz8dEQNdSmr7JvVQphoQDw7YQjYsGV+4f3FdGMrjMzU0Ew3QR1w2SPwK9ww3wUj6
 eHrIdnkd77FJgWyyy/wLTcf55YwGqhIKCSVv3tQmZN/xiuM7x12ZsW8Kb8ydAbKR
 824+VU49dSx3rpnzUPUI/+eb8u5MgLHoNpzDzRWb4Au+05LOkgthDMfC6GdmOnyx
 Asko/u4UNL69cT+xeYNmryMI+OHdqkRILMadefySJ8QTBfvZHsazYqb4YtWA0qf9
 1VAmuvQzToGC7waAHj2X0FSPEISUx+NehXgQjIOZ9aVD2L1XDFm1wRpI3CsIFRA1
 2IrgGYpR7rQ2Uj6z7VI+uU+0O/fs13Tctyv6C1wuqkjM+itBLQ5IGuG9shBPXazP
 UrD9R+SZfMsGXa1ABlcYJE7M+xEusoN2TKGj5yR5D9kt+a/JcqF2GEmY/KpNkEkT
 rmdqAgHqL/bvIc/qyfU4ZayR1MlGe38oPfm9D+vYqJk/V+drlWt66PkamRowfyej
 WufO4l4mB8bpR+HLjRXK4Nh0wHzh8WDgZUrRJXBmOqpig6v3HCJzUejvFTBjzdjx
 uOUlN41RGnOI1L6OpY6IAc2GPw7IwMHKXaIKL0OwyaK+lxvVMO1jRg3TieXzdSp1
 wF7GqfOw2WFVvX1n5xX3
 =vOpC
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is seven small fixes which are all for user visible issues that
  fortunately only occur in rare circumstances.

  The most serious is the sr one in which QEMU can cause us to read
  beyond the end of a buffer (I don't think it's exploitable, but just
  in case).

  The next is the sd capacity fix which means all non 512 byte sector
  drives greater than 2TB fail to be correctly sized.

  The rest are either in new drivers (qedf) or on error legs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION
  scsi: aacraid: fix PCI error recovery path
  scsi: sd: Fix capacity calculation with 32-bit sector_t
  scsi: qla2xxx: Add fix to read correct register value for ISP82xx.
  scsi: qedf: Fix crash due to unsolicited FIP VLAN response.
  scsi: sr: Sanity check returned mode data
  scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
2017-04-15 09:42:14 -07:00
Martin K. Petersen bcd069bb25 scsi: sd: Remove LBPRZ dependency for discards
Separating discards and zeroout operations allows us to remove the LBPRZ
block zeroing constraints from discards and honor the device preferences
for UNMAP commands.

If supported by the device, we'll also choose UNMAP over one of the
WRITE SAME variants for discards.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Martin K. Petersen e6bd931284 scsi: sd: Separate zeroout and discard command choices
Now that zeroout and discards are distinct operations we need to
separate the policy of choosing the appropriate command. Create a
zeroing_mode which can be one of:

write:			Zeroout assist not present, use regular WRITE
writesame:		Allow WRITE SAME(10/16) with a zeroed payload
writesame_16_unmap:	Allow WRITE SAME(16) with UNMAP
writesame_10_unmap:	Allow WRITE SAME(10) with UNMAP

The last two are conditional on the device being thin provisioned with
LBPRZ=1 and LBPWS=1 or LBPWS10=1 respectively.

Whether to set the UNMAP bit or not depends on the REQ_NOUNMAP flag. And
if none of the _unmap variants are supported, regular WRITE SAME will be
used if the device supports it.

The zeroout_mode is exported in sysfs and the detected mode for a given
device can be overridden using the string constants above.

With this change in place we can now issue WRITE SAME(16) with UNMAP set
for block zeroing applications that require hard guarantees and
logical_block_size granularity. And at the same time use the UNMAP
command with the device's preferred granulary and alignment for discard
operations.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Christoph Hellwig 48920ff2a5 block: remove the discard_zeroes_data flag
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Christoph Hellwig e4b878371b sd: implement unmapping Write Zeroes
Try to use a write same with unmap bit variant if the device supports it
and the caller allows for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Christoph Hellwig 02d261034f sd: implement REQ_OP_WRITE_ZEROES
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Christoph Hellwig 81d926e8b5 sd: split sd_setup_discard_cmnd
Split sd_setup_discard_cmnd into one function per provisioning type.  While
this creates some very slight duplication of boilerplate code it keeps the
code modular for additions of new provisioning types, and for reusing the
write same functions for the upcoming scsi implementation of the Write Zeroes
operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Martin K. Petersen 7c856152cb scsi: sd: Fix capacity calculation with 32-bit sector_t
We previously made sure that the reported disk capacity was less than
0xffffffff blocks when the kernel was not compiled with large sector_t
support (CONFIG_LBDAF). However, this check assumed that the capacity
was reported in units of 512 bytes.

Add a sanity check function to ensure that we only enable disks if the
entire reported capacity can be expressed in terms of sector_t.

Cc: <stable@vger.kernel.org>
Reported-by: Steve Magnani <steve.magnani@digidescorp.com>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-07 17:07:16 -04:00
Fam Zheng 6780414519 scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we
end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size
may get error.

[mkp: tweaked to avoid setting rw_max twice and added typecast]

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: ca369d51b3 ("block/sd: Fix device-imposed transfer length limits")
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-07 17:05:15 -04:00
Hannes Reinecke e8f8d50e07 scsi: sd: Return SUCCESS in sd_eh_action() after device offline
If sd_eh_action() decides to take the device offline there is
no point in returning FAILED, as taking the device offline
is the ultimate step in SCSI EH anyway.
So further escalation via SCSI EH is not likely to make a
difference and we can as well return SUCCESS.

Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-06 13:07:32 -04:00
Hannes Reinecke 7a38dc0bfb scsi: scsi_error: count medium access timeout only once per EH run
The current medium access timeout counter will be increased for
each command, so if there are enough failed commands we'll hit
the medium access timeout for even a single device failure and
the following kernel message is displayed:

sd H:C:T:L: [sdXY] Medium access timeout failure. Offlining disk!

Fix this by making the timeout per EH run, ie the counter will
only be increased once per device and EH run.

Fixes: 18a4d0a ("[SCSI] Handle disk devices which can not process medium access commands")
Cc: Ewan Milne <emilne@redhat.com>
Cc: Lawrence Obermann <loberman@redhat.com>
Cc: Benjamin Block <bblock@linux.vnet.ibm.com>
Cc: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-06 13:07:32 -04:00
Linus Torvalds 95422dec6b SCSI fixes on 20170315
This is a rather large set of fixes.  The bulk are for lpfc correcting
 a lot of issues in the new NVME driver code which just went in in the
 merge window.  The others are: fix a hang in the vmware paravirt
 driver caused by incorrect handling of the new MSI vector allocation.
 A long standing bug in storvsc, which recent block changes turned from
 being a harmless annoyance into a hang and yet more fallout (in
 mpt3sas) from the changes to device blocking.  The remainder are small
 fixes and updates.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYyXW+AAoJEAVr7HOZEZN4yzIP/R2qDzwoXw3dl5xHs2AQuxWU
 P7mbUqtN2meU0klIKNCaYq6WO797WvGblSldrPwB08M7QOg8vy7boNiCYmwdEs6W
 Ftihj99OwEp0598MldNw1hBtMqjJ1WSu/kLK/I3pjLjltyPbQunuvaEwSNvxD1r7
 8BRmngYLFPb3KQDSO74ILBdZ5DqsriIXDHlngKSKfrpjO5IWXHrmzhZTmU2qpE40
 H4C4+Kn3/iZKGRiMm4rsikRDEGty9aVo7f4CIrwWslLkaJWf/AS4Kf3rd5qqclRj
 crjP/axqXheuwggKaHNhnxX5oSGt61ZCH9lGMmSNV/q6pUtNsrhO2uZuBIP0vtDB
 y7Pfw0Z3MGnbsOmBhZLRnUYC9PgSZPysy3TuS6/BgGx2ZFPnFxXjA1T73YaUil9q
 zcCOV2E7WHjIFGrpF2jNmoGsh1360TUOjg8YXdLi8pC2sEqSU331nvB5W9xAw3EG
 ewusZFetumxV8pykSyuDknU5gAMVYhHv+I+eNP8SB0eUZTLeKlcZpWIt3QYSYRdJ
 KbCc4CSi28J+DghB86eRZC64QqFiYMP546zUPpD1Enh/HXtVrTYzRN9/Qwo2FJRZ
 s5E3aC6tPceSuOmqn4aL9+Il7NXDj1Y/M9Qwe6Dzjp7q8hLCb7J1TWY3G5ImBWI7
 TfdyBrvZerqpxga+6j5g
 =0mha
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a rather large set of fixes. The bulk are for lpfc correcting
  a lot of issues in the new NVME driver code which just went in in the
  merge window.

  The others are:

   - fix a hang in the vmware paravirt driver caused by incorrect
     handling of the new MSI vector allocation

   - long standing bug in storvsc, which recent block changes turned
     from being a harmless annoyance into a hang

   - yet more fallout (in mpt3sas) from the changes to device blocking

  The remainder are small fixes and updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
  scsi: lpfc: Add shutdown method for kexec
  scsi: storvsc: Workaround for virtual DVD SCSI version
  scsi: lpfc: revise version number to 11.2.0.10
  scsi: lpfc: code cleanups in NVME initiator discovery
  scsi: lpfc: code cleanups in NVME initiator base
  scsi: lpfc: correct rdp diag portnames
  scsi: lpfc: remove dead sli3 nvme code
  scsi: lpfc: correct double print
  scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
  scsi: lpfc: Rework lpfc Kconfig for NVME options
  scsi: lpfc: add transport eh_timed_out reference
  scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
  scsi: lpfc: add NVME exchange aborts
  scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
  scsi: lpfc: Fix IO submission if WQ is full
  scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
  scsi: lpfc: Fix RCTL value on NVME LS request and response
  scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
  scsi: lpfc: fix missing spin_unlock on sql_list_lock
  scsi: lpfc: don't dereference dma_buf->iocbq before null check
  ...
2017-03-15 10:44:19 -07:00
Jan Kara c01228db4b Revert "scsi, block: fix duplicate bdi name registration crashes"
This reverts commit 0dba1314d4. It causes
leaking of device numbers for SCSI when SCSI registers multiple gendisks
for one request_queue in succession. It can be easily reproduced using
Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Furthermore the protection provided by this commit is not needed anymore
as the problem it was fixing got also fixed by commit 165a5e22fa
"block: Move bdi_unregister() to del_gendisk()".

[1]: http://marc.info/?l=linux-block&m=148554717109098&w=2

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Damien Le Moal c46f09175d scsi: sd: Check for unaligned partial completion
Commit <f2e767bb5d6e> ("mpt3sas: Force request partial completion
alignment") was not considering the case of commands not operating on
logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned
partial replies). In this case, forcing alignment of resid to the device
logical block size can break the command result, e.g. in the case of
REQ_OP_ZONE_REPORT, the exact number of zone reported by the device.

Move the partial completion alignement check of mpt3sas to a generic
implementation in sd_done(). The check is added within the default
section of the initial req_op() switch case so that the report and reset
zone commands are ignored. In addition, as sd_done() is not called for
passthrough requests, resid corrections are not done as intended by the
initial mpt3sas patch.

Fixes: f2e767bb5d ("mpt3sas: Force request partial completion alignment")
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-01 21:46:11 -05:00
Christoph Hellwig fcbfffe2c5 scsi: remove scsi_execute_req_flags
And switch all callers to use scsi_execute instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-23 16:57:36 -05:00
Christoph Hellwig 6fa2b8f9e3 scsi: sd: improve TUR handling in sd_check_events
Remove bogus evaluations of retval and sshdr when the device is offline,
and fix a possible NULL pointer dereference by allocating the 8 byte
sized sense header on stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22 19:34:17 -05:00