The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220631.366371-1-javierm@redhat.com
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220540.366218-1-javierm@redhat.com
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacba ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220456.366090-1-javierm@redhat.com
Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback.
Doing that will destroy the fb_info too early, while references to it may
still exist, leading to a use-after-free error.
To prevent this, check the fb_info reference counter when attempting to
kfree the data structure in framebuffer_release(). That will leak it but
at least will prevent the mentioned error.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220413.365977-1-javierm@redhat.com
This reverts commit aafa025c76. That commit
attempted to fix a NULL pointer dereference, caused by the struct fb_info
associated with a framebuffer device to not longer be valid when the file
descriptor was closed.
The issue was exposed by commit 27599aacba ("fbdev: Hot-unplug firmware
fb devices on forced removal"), which added a new path that goes through
the struct device removal instead of directly unregistering the fb.
Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback. This meant that due to this switch,
the fb_info was now destroyed too early, while references still existed,
while before it was simply leaked.
The patch we're reverting here reinstated that leak, hence "fixed" the
regression. But the proper solution is to fix the drivers to not release
the fb_info too soon.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504115917.758787-1-javierm@redhat.com
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks for string size which can panic the kernel, like incase
of overflow detection.
In papr_scm, papr_scm_pmu_check_events function uses stat->stat_id with
string operations, to populate the nvdimm_events_map array. Since
stat_id variable is not NULL terminated, the kernel panics with
CONFIG_FORTIFY_SOURCE enabled at boot time.
Below are the logs of kernel panic:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
Oops: Exception in kernel mode, sig: 5 [#1]
NIP [c00000000077dad0] fortify_panic+0x28/0x38
LR [c00000000077dacc] fortify_panic+0x24/0x38
Call Trace:
[c0000022d77836e0] [c00000000077dacc] fortify_panic+0x24/0x38 (unreliable)
[c00800000deb2660] papr_scm_pmu_check_events.constprop.0+0x118/0x220 [papr_scm]
[c00800000deb2cb0] papr_scm_probe+0x288/0x62c [papr_scm]
[c0000000009b46a8] platform_probe+0x98/0x150
Fix this issue by using kmemdup_nul() to copy the content of
stat->stat_id directly to the nvdimm_events_map array.
mpe: stat->stat_id comes from the hypervisor, not userspace, so there is
no security exposure.
Fixes: 4c08d4bbc0 ("powerpc/papr_scm: Add perf interface support")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220505153451.35503-1-kjain@linux.ibm.com
Vladimir Oltean says:
====================
Ocelot VCAP fixes
Changes in v2:
fix the NPDs and UAFs caused by filter->trap_list in a more robust way
that actually does not introduce bugs of its own (1/5)
This series fixes issues found while running
tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot
switch:
- NULL pointer dereference when failing to offload a filter
- NULL pointer dereference after deleting a trap
- filters still having effect after being deleted
- dropped packets still being seen by software
- statistics counters showing double the amount of hits
- statistics counters showing inexistent hits
- invalid configurations not rejected
====================
Link: https://lore.kernel.org/r/20220504235503.4161890-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given the following order of operations:
(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.
When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.
Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.
The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:
vcap_entry_set
/ | \
/ | \
/ | \
/ | \
es0_entry_set is1_entry_set is2_entry_set
\ | /
\ | /
\ | /
vcap_data_set(data.counter, ...)
The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.
The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.
So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.
The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.
Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.
The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.
The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).
Fixes: b596229448 ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.
We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.
The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.
Fixes: 1397a2eb52 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.
The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.
Some of the more noticeable effects of having filters match on both
lookups:
- in "tc -s filter show dev swp0 ingress", we see each packet matching a
VCAP IS2 filter counted twice. This throws off scripts such as
tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
fail.
- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
because once the CPU port becomes a member of the destination port
mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
the action vector can only appear in the first lookup. What happens
when a filter matches both lookups is that the action vector is
combined, and this makes the POLICE_ENA bit ineffective, since the
last lookup in which it has appeared is the second one. In other
words, "tc-drop" actions do not drop packets for the CPU port, dropped
packets are still seen by software unless there was an FDB entry that
directed those packets to some other place different from the CPU.
The last bit used to work, because in the initial commit b596229448
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit
c1c3993edb ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.
Fixes: 226e9cd82a ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.
The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.
The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.
Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.
Fixes: 1397a2eb52 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.
Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.
There are at least 2 bugs which are direct consequences of this design
decision.
First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().
Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().
Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/
but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():
- ocelot_trap_add()
- felix_tag_8021q_vlan_add_rx()
- felix_tag_8021q_vlan_add_tx()
Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.
So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.
Fixes: e42bd4ed09 ("net: mscc: ocelot: keep traps in a list")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read requests that return with NRF error are partially completed in
dasd_eckd_ese_read(). The function keeps track of the amount of
processed bytes and the driver will eventually return this information
back to the block layer for further processing via __dasd_cleanup_cqr()
when the request is in the final stage of processing (from the driver's
perspective).
For this, blk_update_request() is used which requires the number of
bytes to complete the request. As per documentation the nr_bytes
parameter is described as follows:
"number of bytes to complete for @req".
This was mistakenly interpreted as "number of bytes _left_ for @req"
leading to new requests with incorrect data length. The consequence are
inconsistent and completely wrong read requests as data from random
memory areas are read back.
Fix this by correctly specifying the amount of bytes that should be used
to complete the request.
Fixes: 5e6bdd37c5 ("s390/dasd: fix data corruption for thin provisioned devices")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When reading unformatted tracks on ESE devices, the corresponding memory
areas are simply set to zero for each segment. This is done incorrectly
for blocksizes < 4096.
There are two problems. First, the increment of dst is done using the
counter of the loop (off), which is increased by blksize every
iteration. This leads to a much bigger increment for dst as actually
intended. Second, the increment of dst is done before the memory area
is set to 0, skipping a significant amount of bytes of memory.
This leads to illegal overwriting of memory and ultimately to a kernel
panic.
This is not a problem with 4k blocksize because
blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a
single iteration for the inner segment loop (bv.bv_len == blksize). The
incorrectly used 'off' value to increment dst is 0 and the correct
memory area is used.
In order to fix this for blksize < 4k, increment dst correctly using the
blksize and only do it at the end of the loop.
Fixes: 5e2b17e712 ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ESE devices we get an error for write operations on an unformatted
track. Afterwards the track will be formatted and the IO operation
restarted.
When using alias devices a track might be accessed by multiple requests
simultaneously and there is a race window that a track gets formatted
twice resulting in data loss.
Prevent this by remembering the amount of formatted tracks when starting
a request and comparing this number before actually formatting a track
on the fly. If the number has changed there is a chance that the current
track was finally formatted in between. As a result do not format the
track and restart the current IO to check.
The number of formatted tracks does not match the overall number of
formatted tracks on the device and it might wrap around but this is no
problem. It is only needed to recognize that a track has been formatted at
all in between.
Fixes: 5e2b17e712 ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ESE devices we get an error when accessing an unformatted track.
The handling of this error will return zero data for read requests and
format the track on demand before writing to it. To do this the code needs
to distinguish between read and write requests. This is done with data from
the blocklayer request. A pointer to the blocklayer request is stored in
the CQR.
If there is an error on the device an ERP request is built to do error
recovery. While the ERP request is mostly a copy of the original CQR the
pointer to the blocklayer request is not copied to not accidentally pass
it back to the blocklayer without cleanup.
This leads to the error that during ESE handling after an ERP request was
built it is not possible to determine the IO direction. This leads to the
formatting of a track for read requests which might in turn lead to data
corruption.
Fixes: 5e2b17e712 ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.
Fixes: 3b89ea9c59 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolas Dichtel says:
====================
vrf: fix address binding with icmp socket
The first patch fixes the issue.
The second patch adds related tests in selftests.
====================
Link: https://lore.kernel.org/r/20220504090739.21821-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.
Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0 2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address
CC: stable@vger.kernel.org
Fixes: 1b69c6d0ae ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.
These functions require the probe function to be called so that
priv can be allocated.
Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().
Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit f1131b9c23 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: stable@vger.kernel.org
Fixes: f1131b9c23 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a race when we were calling folio_next() in the BIO folio iter
without holding a reference, meaning the folio could be split or freed,
and we'd jump to the next page instead of the intended next folio.
- Fix readahead creating single-page folios instead of the intended
large folios when doing reads that are not a power of two in size.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmJ0Xu4ACgkQDpNsjXcp
gj4rTAf/Rp2P9jwnOCN9X78YBiydkHq9dtIYbEz1jhOr2pnbz/ZWOeWvVvTBgG5I
GSIeaK3dhCBqi6G28QrQR1j1+gOWOJOs/rmJtkkOgBfoGsCL8HLFzcbXR10zeF2K
8bhivsq5tshn2DiVu8WK1W2n25mg4k7ORrBVcuUtW4Am8EPsyJpzoSWBTlZJvClt
Re9mIkbWNWktEyRiMl8wA4WRKqysaIWBuf9jugaOrv0Y0Db2TqiqYiAG6xm3VSZy
ABf8ZSOyNuxF6ZrW2tUjwdnJ6oDXjVB3Dykw4EQMFQ6uINJPBArj8AkDUe4FJa2w
9FmDLDxR1T4k9+8cEC6ZkkVb6KyvdQ==
=KKsJ
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"Two folio fixes for 5.18.
Darrick and Brian have done amazing work debugging the race I created
in the folio BIO iterator. The readahead problem was deterministic, so
easy to fix.
- Fix a race when we were calling folio_next() in the BIO folio iter
without holding a reference, meaning the folio could be split or
freed, and we'd jump to the next page instead of the intended next
folio.
- Fix readahead creating single-page folios instead of the intended
large folios when doing reads that are not a power of two in size"
* tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache:
mm/readahead: Fix readahead with large folios
block: Do not call folio_next() on an unreferenced folio
Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for
delayed works queued in rds_wq might be invoked after a net namespace's
refcount already reached 0.
Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq),
it is guaranteed that we can instead use maybe_get_net() from delayed work
functions until rds_tcp_exit_net() returns.
Note that I'm not convinced that all works which might access a net
namespace are already queued in rds_wq by the moment rds_tcp_exit_net()
calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net()
will fail to wait for work functions, and kmem_cache_free() could be
called from net_free() before maybe_get_net() is called from
rds_tcp_tune().
Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 3a58f13a88 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/41d09faf-bc78-1a87-dfd1-c6d1b5984b61@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
-----BEGIN PGP SIGNATURE-----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=fpGC
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
If an irq is pending when devm_request_irq() is called, the irq
handler will cause a NULL pointer access because initialisation
is not done yet.
Fixes: 9d7ee0e28d ("tty: serial: lpuart: avoid report NULL interrupt")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com>
Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gsmtty_write() does not prevent the user to use the full fifo size of 4096
bytes as allocated in gsm_dlci_alloc(). However, gsmtty_write_room() tries
to limit the return value by 'TX_SIZE' and returns a negative value if the
fifo has more than 'TX_SIZE' bytes stored. This is obviously wrong as
'TX_SIZE' is defined as 512.
Define 'TX_SIZE' to the fifo size and use it accordingly for allocation to
keep the current behavior. Return the correct remaining size of the fifo in
gsmtty_write_room() via kfifo_avail().
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation activates the mux if it was restarted and opens
the control channel if the mux was previously closed and we are now acting
as initiator instead of responder, which is the default setting.
This has two issues.
1) No mux is activated if we keep all default values and only switch to
initiator. The control channel is not allocated but will be opened next
which results in a NULL pointer dereference.
2) Switching the configuration after it was once configured while keeping
the initiator value the same will not reopen the control channel if it was
closed due to parameter incompatibilities. The mux remains dead.
Fix 1) by always activating the mux if it is dead after configuration.
Fix 2) by always opening the control channel after mux activation.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'len' is decreased after each octet that has its EA bit set to 0, which
means that the value is encoded with additional octets. However, the final
octet does not decreases 'len' which results in 'len' being one byte too
long. A buffer over-read may occur in tty_insert_flip_string() as it tries
to read one byte more than the passed content size of 'data'.
Decrease 'len' also for the final octet which has the EA bit set to 1 to
write the correct number of bytes from the internal receive buffer to the
virtual tty.
Fixes: 2e124b4a39 ("TTY: switch tty_flip_buffer_push")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8
respectively, so we cannot use the definition in serial_port.h.
Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled:
this guarantees that when the port is configured as AP UART, the
right register layout is interpreted by the UART IP.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some
specific quirks: we are declaring a register shift of 2, but this is
only valid for the majority of the registers, as there are some that
are out of the standard layout.
Specifically, this driver is using definitions from serial_reg.h, where
we have a UART_EFR register defined as 2: this results in a 0x8 offset,
but there we have the FCR register instead.
The right offset for the EFR register on MediaTek UART is at 0x98,
so, following the decimal definition convention in serial_reg.h and
accounting for the register left shift of two, add and use the correct
register address for this IP, defined as decimal 38, so that the final
calculation results in (0x26 << 2) = 0x98.
Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: 5930cb3511 ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.
Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.
This patch is (also) a preparation for making i2c remove callbacks
return void.
Fixes: 3ba76256fc ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new state allowing device addition with paused balance is not
exported to user space so it can't recognize it and actually start the
operation.
Fixes: efc0e69c2f ("btrfs: introduce exclusive operation BALANCE_PAUSED state")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:
1) We are logging a directory with inode number 1000 that has its items
spread across 3 leaves in the subvolume's tree:
leaf A - has index keys from the range 2 to 20 for example. The last
item in the leaf corresponds to a dir item for index number 20. All
these dir items were created in a past transaction.
leaf B - has index keys from the range 22 to 100 for example. It has
no keys from other inodes, all its keys are dir index keys for our
directory inode number 1000. Its first key is for the dir item with
a sequence number of 22. All these dir items were also created in a
past transaction.
leaf C - has index keys for our directory for the range 101 to 120 for
example. This leaf also has items from other inodes, and its first
item corresponds to the dir item for index number 101 for our directory
with inode number 1000;
2) When we finish processing the items from leaf A at log_dir_items(),
we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
offset of 21, meaning the log is authoritative for the index range
from 21 to 21 (a single sequence number). At this point leaf B was
not yet modified in the current transaction;
3) When we return from log_dir_items() we have released our read lock on
leaf B, and have set *last_offset_ret to 21 (index number of the first
item on leaf B minus 1);
4) Some other task inserts an item for other inode (inode number 1001 for
example) into leaf C. That resulted in pushing some items from leaf C
into leaf B, in order to make room for the new item, so now leaf B
has dir index keys for the sequence number range from 22 to 102 and
leaf C has the dir items for the sequence number range 103 to 120;
5) At log_directory_changes() we call log_dir_items() again, passing it
a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
of leaf B, since leaf B was modified in the current transaction.
We have also initialized 'last_old_dentry_offset' to 20 after calling
btrfs_previous_item() at log_dir_items(), as it left us at the last
item of leaf A, which refers to the dir item with sequence number 20;
6) We then call process_dir_items_leaf() to process the dir items of
leaf B, and when we process the first item, corresponding to slot 0,
sequence number 22, we notice the dir item was created in a past
transaction and its sequence number is greater than the value of
*last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
error from insert_dir_log_key(), as we have already inserted that
key at step 2, triggering the assertion at process_dir_items_leaf().
The trace produced in dmesg is like the following:
assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857
[198255.980839][ T7460] ------------[ cut here ]------------
[198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617!
[198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+
[198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e
[198255.989465][ T7460] Code: 8b 4c 89 (...)
[198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282
[198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000
[198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24
[198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507
[198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef
[198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358
[198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000
[198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0
[198256.015239][ T7460] Call Trace:
[198256.015674][ T7460] <TASK>
[198256.016313][ T7460] log_dir_items.cold+0x16/0x2c
[198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0
[198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270
[198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.031114][ T7460] ? lock_acquired+0xbe/0x660
[198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.034386][ T7460] ? lock_release+0xcf/0x8a0
[198256.036152][ T7460] log_directory_changes+0xf9/0x170
[198256.036993][ T7460] ? log_dir_items+0xba0/0xba0
[198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0
[198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0
[198256.041294][ T7460] ? log_directory_changes+0x170/0x170
[198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60
[198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.046568][ T7460] ? lock_release+0xcf/0x8a0
[198256.047504][ T7460] ? lock_downgrade+0x420/0x420
[198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0
[198256.049747][ T7460] ? lock_downgrade+0x420/0x420
[198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.051618][ T7460] ? __might_resched+0x128/0x1c0
[198256.052511][ T7460] ? __might_sleep+0x66/0xc0
[198256.053442][ T7460] ? __kasan_check_read+0x11/0x20
[198256.054251][ T7460] ? iget5_locked+0xbd/0x150
[198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110
[198256.055929][ T7460] ? btrfs_iget+0xc7/0x150
[198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0
[198256.057502][ T7460] ? free_extent_buffer+0x13/0x20
[198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0
[198256.059137][ T7460] ? log_directory_changes+0x170/0x170
[198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.061905][ T7460] ? lock_contended+0x770/0x770
[198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750
[198256.063582][ T7460] ? lock_downgrade+0x420/0x420
[198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0
[198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0
[198256.066654][ T7460] ? stack_trace_save+0x94/0xc0
[198256.068008][ T7460] ? __kasan_check_write+0x14/0x20
[198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430
[198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0
[198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20
[198256.075345][ T7460] ? lock_downgrade+0x420/0x420
[198256.076142][ T7460] ? lock_contended+0x770/0x770
[198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40
[198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750
[198256.081991][ T7460] ? wait_current_trans+0xc8/0x240
[198256.083320][ T7460] ? lock_downgrade+0x420/0x420
[198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70
[198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.087544][ T7460] ? lock_release+0xcf/0x8a0
[198256.088305][ T7460] ? lock_downgrade+0x420/0x420
[198256.090375][ T7460] ? dget_parent+0x8e/0x300
[198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.094918][ T7460] ? lock_downgrade+0x420/0x420
[198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.101822][ T7460] ? dget_parent+0xb7/0x300
[198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60
[198256.105052][ T7460] btrfs_sync_file+0x629/0xa40
[198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.109655][ T7460] ? __fget_files+0x161/0x230
[198256.110760][ T7460] vfs_fsync_range+0x6d/0x110
[198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.113556][ T7460] __x64_sys_fsync+0x45/0x70
[198256.114323][ T7460] do_syscall_64+0x5c/0xc0
[198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50
[198256.116030][ T7460] ? do_syscall_64+0x69/0xc0
[198256.116768][ T7460] ? do_syscall_64+0x69/0xc0
[198256.117555][ T7460] ? do_syscall_64+0x69/0xc0
[198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0
[198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20
[198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae
[198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab
[198256.122067][ T7460] Code: 0f 05 48 (...)
[198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab
[198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004
[198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8
[198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001
[198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8
[198256.133403][ T7460] </TASK>
Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/
Fixes: 732d591a5d ("btrfs: stop copying old dir items when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zone_activate() checks if it activated all the underlying zones in
the loop. However, that check never hit on an unlimited activate zone
device (max_active_zones == 0).
Fortunately, it still works without ENOSPC because btrfs_zone_activate()
returns true in the end, even if block_group->zone_is_active == 0. But, it
is confusing to have non zone_is_active block group still usable for
allocation. Also, we are wasting CPU time to iterate the loop every time
btrfs_zone_activate() is called for the blog groups.
Since error case in the loop is handled by out_unlock, we can just set
zone_is_active and do the list stuff after the loop.
Fixes: f9a912a3c4 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zone_activate() checks if block_group->alloc_offset ==
block_group->zone_capacity every time it iterates the loop. But, it is
not depending on the index. Move out the check and do it only once.
Fixes: f9a912a3c4 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For a 4K sector sized btrfs with v1 cache enabled and only mounted on
systems with 4K page size, if it's mounted on subpage (64K page size)
systems, it can cause the following warning on v1 space cache:
BTRFS error (device dm-1): csum mismatch on free space cache
BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now
Although not a big deal, as kernel can rebuild it without problem, such
warning will bother end users, especially if they want to switch the
same btrfs seamlessly between different page sized systems.
[CAUSE]
V1 free space cache is still using fixed PAGE_SIZE for various bitmap,
like BITS_PER_BITMAP.
Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1
cache size to checksum.
Thus kernel will always reject v1 cache with a different PAGE_SIZE with
csum mismatch.
[FIX]
Although we should fix v1 cache, it's already going to be marked
deprecated soon.
And we have v2 cache based on metadata (which is already fully subpage
compatible), and it has almost everything superior than v1 cache.
So just force subpage mount to use v2 cache on mount.
Reported-by: Matt Corallo <blnxfsl@bluematt.me>
CC: stable@vger.kernel.org # 5.15+
Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
1) start_kernel -> cpuset_init()
2) start_kernel -> cgroup_init() -> cpuset_bind()
3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()
The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.
For systems with cgroup v2 setup, cpuset_bind() is called once. As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.
For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.
[ 2.609781] cpuset_bind() called - v2 = 1
[ 3.079473] cpuset_init_smp() called
[ 7.103710] cpuset_bind() called - v2 = 0
smp_init() is called after the first two init functions. So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.
To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly. For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.
cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Disable -Warray-bounds warning for gcc12, since there known way to
workaround false positive warnings on lowcore accesses would result
in worse code on fast paths.
- Avoid lockdep_assert_held() warning in kvm vm memop code.
- Reduce overhead within gmap_rmap code to get rid of long latencies
when e.g. shutting down 2nd level guests.
-----BEGIN PGP SIGNATURE-----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=KjLw
-----END PGP SIGNATURE-----
Merge tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Disable -Warray-bounds warning for gcc12, since the only known way to
workaround false positive warnings on lowcore accesses would result
in worse code on fast paths.
- Avoid lockdep_assert_held() warning in kvm vm memop code.
- Reduce overhead within gmap_rmap code to get rid of long latencies
when e.g. shutting down 2nd level guests.
* tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390: vsie/gmap: reduce gmap_rmap overhead
KVM: s390: Fix lockdep issue in vm memop
s390: disable -Warray-bounds
wireguard
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XuN7
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, rxrpc and wireguard.
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability"
* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
NFC: netlink: fix sleep in atomic bug when firmware download timeout
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
...
Javier Martinez Canillas