Commit Graph

42 Commits

Author SHA1 Message Date
Aneesh Kumar K.V 87a7ae75d7 mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4e ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices.  But how vmemmap mappings are created are architecture specific. 
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table

vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping.  Hence allow architecture to
opt for this feature.  I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.

This patch fixes the below crash on ppc64.

BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP:  c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300   Not tainted  (6.3.0-rc5-150500.34-default+)
MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24842228  XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64

Link: https://lkml.kernel.org/r/20230411142214.64464-1-aneesh.kumar@linux.ibm.com
Fixes: 4917f55b4e ("mm/sparse-vmemmap: improve memory savings for compound devmaps")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:30:09 -07:00
Arnd Bergmann 5f300fd59a mm: make arch_has_descending_max_zone_pfns() static
clang produces a build failure on x86 for some randconfig builds after a
change that moves around code to mm/mm_init.c:

Cannot find symbol for section 2: .text.
mm/mm_init.o: failed

I have not been able to figure out why this happens, but the __weak
annotation on arch_has_descending_max_zone_pfns() is the trigger here.

Removing the weak function in favor of an open-coded Kconfig option check
avoids the problem and becomes clearer as well as better to optimize by
the compiler.

[arnd@arndb.de: fix logic bug]
  Link: https://lkml.kernel.org/r/20230415081904.969049-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20230414080418.110236-1-arnd@kernel.org
Fixes: 9420f89db2 ("mm: move most of core MM initialization to mm/mm_init.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:29:42 -07:00
Tomas Krcka dd31bad219 mm: be less noisy during memory hotplug
Turn a pr_info() into a pr_debug() to prevent dmesg spamming on systems
where memory hotplug is a frequent operation.

Link: https://lkml.kernel.org/r/20230323174349.35990-1-krckatom@amazon.de
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Suggested-by: Jan H. Schönherr <jschoenh@amazon.de>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:58 -07:00
Kirill A. Shutemov 3f6dac0fd1 mm/page_alloc: make deferred page init free pages in MAX_ORDER blocks
Normal page init path frees pages during the boot in MAX_ORDER chunks, but
deferred page init path does it in pageblock blocks.

Change deferred page init path to work in MAX_ORDER blocks.

For cases when MAX_ORDER is larger than pageblock, set migrate type to
MIGRATE_MOVABLE for all pageblocks covered by the page.

Link: https://lkml.kernel.org/r/20230321002415.20843-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:56 -07:00
Mike Rapoport (IBM) d5d2c02a49 mm: move kmem_cache_init() declaration to mm/slab.h
kmem_cache_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/slab.h

Move kmem_cache_init() declaration to mm/slab.h

Link: https://lkml.kernel.org/r/20230321170513.2401534-13-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:54 -07:00
Mike Rapoport (IBM) eb8589b4f8 mm: move mem_init_print_info() to mm_init.c
mem_init_print_info() is only called from mm_core_init().

Move it close to the caller and make it static.

Link: https://lkml.kernel.org/r/20230321170513.2401534-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:54 -07:00
Mike Rapoport (IBM) de57807e6f init,mm: fold late call to page_ext_init() to page_alloc_init_late()
When deferred initialization of struct pages is enabled, page_ext_init()
must be called after all the deferred initialization is done, but there is
no point to keep it a separate call from kernel_init_freeable() right
after page_alloc_init_late().

Fold the call to page_ext_init() into page_alloc_init_late() and localize
deferred_struct_pages variable.

Link: https://lkml.kernel.org/r/20230321170513.2401534-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:54 -07:00
Mike Rapoport (IBM) f2fc4b44ec mm: move init_mem_debugging_and_hardening() to mm/mm_init.c
init_mem_debugging_and_hardening() is only called from mm_core_init().

Move it close to the caller, make it static and rename it to
mem_debugging_and_hardening_init() for consistency with surrounding
convention.

Link: https://lkml.kernel.org/r/20230321170513.2401534-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:54 -07:00
Mike Rapoport (IBM) 4cd1e9edf6 mm: call {ptlock,pgtable}_cache_init() directly from mm_core_init()
and drop pgtable_init() as it has no real value and its name is
misleading.

Link: https://lkml.kernel.org/r/20230321170513.2401534-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:53 -07:00
Mike Rapoport (IBM) b7ec1bf3e7 init,mm: move mm_init() to mm/mm_init.c and rename it to mm_core_init()
Make mm_init() a part of mm/ codebase.  mm_core_init() better describes
what the function does and does not clash with mm_init() in kernel/fork.c

Link: https://lkml.kernel.org/r/20230321170513.2401534-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:53 -07:00
Mike Rapoport (IBM) 534ef4e191 mm: handle hashdist initialization in mm/mm_init.c
The hashdist variable must be initialized before the first call to
alloc_large_system_hash() and free_area_init() looks like a better place
for it than page_alloc_init().

Move hashdist handling to mm/mm_init.c

Link: https://lkml.kernel.org/r/20230321170513.2401534-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:52 -07:00
Mike Rapoport (IBM) 9420f89db2 mm: move most of core MM initialization to mm/mm_init.c
The bulk of memory management initialization code is spread all over
mm/page_alloc.c and makes navigating through page allocator functionality
difficult.

Move most of the functions marked __init and __meminit to mm/mm_init.c to
make it better localized and allow some more spare room before
mm/page_alloc.c reaches 10k lines.

No functional changes.

Link: https://lkml.kernel.org/r/20230321170513.2401534-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05 19:42:52 -07:00
Liu Shixin 1eeaa4fd39 memory: move hotplug memory notifier priority to same file for easy sorting
The priority of hotplug memory callback is defined in a different file. 
And there are some callers using numbers directly.  Collect them together
into include/linux/memory.h for easy reading.  This allows us to sort
their priorities more intuitively without additional comments.

Link: https://lkml.kernel.org/r/20220923033347.3935160-9-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:37:17 -08:00
Liu Shixin d46722ef1c mm/mm_init.c: use hotplug_memory_notifier() directly
Commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1") updated the minimum gcc version to 5.1.  So the problem
mentioned in f02c696800 ("include/linux/memory.h: implement
register_hotmemory_notifier()") no longer exist.  So we can now switch to
use hotplug_memory_notifier() directly rather than
register_hotmemory_notifier().

Link: https://lkml.kernel.org/r/20220923033347.3935160-6-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:37:16 -08:00
Yu Zhao ec1c86b25f mm: multi-gen LRU: groundwork
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.

Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.

There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations.  They form a closed-loop system, i.e., "the page reclaim". 
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim.  These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].

To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.

The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
   channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
   flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
   applications usually do not prepare themselves for major page
   faults like they do for blocked I/O. E.g., GUI applications
   commonly use dedicated I/O threads to avoid blocking rendering
   threads.

There are also two access patterns: one with temporal locality and the
other without.  For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].

The next patch will address the "outlying refaults".  Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.

A page is added to the youngest generation on faulting.  The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction.  The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then.  This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.

[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/

Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26 19:46:09 -07:00
Yu Zhao 1587db62d8 include/linux/page-flags-layout.h: cleanups
Tidy things up and delete comments stating the obvious with typos or
making no sense.

Link: https://lkml.kernel.org/r/20210303071609.797782-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 11:20:42 -07:00
Gustavo A. R. Silva 01359eb201 mm: fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of
warnings by explicitly adding a break statement instead of just letting
the code fall through to the next, and by adding a fallthrough
pseudo-keyword in places where the code is intended to fall through.

Link: https://github.com/KSPP/linux/issues/115
Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:47 -08:00
Feng Tang 56f3547bfa mm: adjust vm_committed_as_batch according to vm overcommit policy
When checking a performance change for will-it-scale scalability mmap test
[1], we found very high lock contention for spinlock of percpu counter
'vm_committed_as':

    94.14%     0.35%  [kernel.kallsyms]         [k] _raw_spin_lock_irqsave
    48.21% _raw_spin_lock_irqsave;percpu_counter_add_batch;__vm_enough_memory;mmap_region;do_mmap;
    45.91% _raw_spin_lock_irqsave;percpu_counter_add_batch;__do_munmap;

Actually this heavy lock contention is not always necessary.  The
'vm_committed_as' needs to be very precise when the strict
OVERCOMMIT_NEVER policy is set, which requires a rather small batch number
for the percpu counter.

So keep 'batch' number unchanged for strict OVERCOMMIT_NEVER policy, and
lift it to 64X for OVERCOMMIT_ALWAYS and OVERCOMMIT_GUESS policies.  Also
add a sysctl handler to adjust it when the policy is reconfigured.

Benchmark with the same testcase in [1] shows 53% improvement on a 8C/16T
desktop, and 2097%(20X) on a 4S/72C/144T server.  We tested with test
platforms in 0day (server, desktop and laptop), and 80%+ platforms shows
improvements with that test.  And whether it shows improvements depends on
if the test mmap size is bigger than the batch number computed.

And if the lift is 16X, 1/3 of the platforms will show improvements,
though it should help the mmap/unmap usage generally, as Michal Hocko
mentioned:

: I believe that there are non-synthetic worklaods which would benefit from
: a larger batch.  E.g.  large in memory databases which do large mmaps
: during startups from multiple threads.

[1] https://lore.kernel.org/lkml/20200305062138.GI5972@shao2-debian/

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1589611660-89854-4-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1592725000-73486-4-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1594389708-60781-5-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Jing Xia 86fea8b494 mm/mm_init.c: report kasan-tag information stored in page->flags
The pageflags_layout_usage shows incorrect message by means of
mminit_loglevel when Kasan runs in the mode of software tag-based
enabled with CONFIG_KASAN_SW_TAGS.  This patch corrects it and reports
kasan-tag information.

Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Cc: Orson Zhai <orson.zhai@unisoc.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/1586929370-10838-1-git-send-email-jing.xia.mail@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:12 -07:00
Mateusz Nosek e46b893dd1 mm/mm_init.c: clean code. Use BUILD_BUG_ON when comparing compile time constant
MAX_ZONELISTS is a compile time constant, so it should be compared using
BUILD_BUG_ON not BUG_ON.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200228224617.11343-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:41 -07:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Arun KS ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Pavel Tatashin c1093b746c mm: access zone->node via zone_to_nid() and zone_set_nid()
zone->node is configured only when CONFIG_NUMA=y, so it is a good idea to
have inline functions to access this field in order to avoid ifdef's in c
files.

Link: http://lkml.kernel.org/r/20180730101757.28058-3-osalvador@techadventures.net
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Joe Perches 1170532bb4 mm: convert printk(KERN_<LEVEL> to pr_<level>
Most of the mm subsystem uses pr_<level> so make it consistent.

Miscellanea:

 - Realign arguments
 - Add missing newline to format
 - kmemleak-test.c has a "kmemleak: " prefix added to the
   "Kmemleak testing" logging message via pr_fmt

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org>	[percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Mel Gorman 74033a798f mm: meminit: remove mminit_verify_page_links
mminit_verify_page_links() is an extremely paranoid check that was
introduced when memory initialisation was being heavily reworked.
Profiles indicated that up to 10% of parallel memory initialisation was
spent on checking this for every page.  The cost could be reduced but in
practice this check only found problems very early during the
initialisation rewrite and has found nothing since.  This patch removes an
expensive unnecessary check.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Nate Zimmer <nzimmer@sgi.com>
Tested-by: Waiman Long <waiman.long@hp.com>
Tested-by: Daniel J Blueman <daniel@numascale.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Nate Zimmer <nzimmer@sgi.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:56 -07:00
Mel Gorman 7e18adb4f8 mm: meminit: initialise remaining struct pages in parallel with kswapd
Only a subset of struct pages are initialised at the moment.  When this
patch is applied kswapd initialise the remaining struct pages in parallel.

This should boot faster by spreading the work to multiple CPUs and
initialising data that is local to the CPU.  The user-visible effect on
large machines is that free memory will appear to rapidly increase early
in the lifetime of the system until kswapd reports that all memory is
initialised in the kernel log.  Once initialised there should be no other
user-visibile effects.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Nate Zimmer <nzimmer@sgi.com>
Tested-by: Waiman Long <waiman.long@hp.com>
Tested-by: Daniel J Blueman <daniel@numascale.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Nate Zimmer <nzimmer@sgi.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:56 -07:00
Rasmus Villemoes 194e815120 mm/mm_init.c: mark mminit_loglevel __meminitdata
mminit_loglevel is only referenced from __init and __meminit functions, so
we can mark it __meminitdata.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Rasmus Villemoes 0e2342c709 mm/mm_init.c: park mminit_verify_zonelist as __init
The only caller of mminit_verify_zonelist is build_all_zonelists_init,
which is annotated with __init, so it should be safe to also mark the
former as __init, saving ~400 bytes of .text.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Pintu Kumar <pintu.k@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:11 -08:00
Hugh Dickins e82cb95d62 mm: bring back /sys/kernel/mm
Commit da29bd3622 ("mm/mm_init.c: make creation of the mm_kobj happen
earlier than device_initcall") changed to pure_initcall(mm_sysfs_init).

That's too early: mm_sysfs_init() depends on core_initcall(ksysfs_init)
to have made the kernel_kobj directory "kernel" in which to create "mm".

Make it postcore_initcall(mm_sysfs_init).  We could use core_initcall(),
and depend upon Makefile link order kernel/ mm/ fs/ ipc/ security/ ...
as core_initcall(debugfs_init) and core_initcall(securityfs_init) do;
but better not.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Paul Gortmaker da29bd3622 mm/mm_init.c: make creation of the mm_kobj happen earlier than device_initcall
The use of __initcall is to be eventually replaced by choosing one from
the prioritized groupings laid out in init.h header:

	pure_initcall               0
	core_initcall               1
	postcore_initcall           2
	arch_initcall               3
	subsys_initcall             4
	fs_initcall                 5
	device_initcall             6
	late_initcall               7

In the interim, all __initcall are mapped onto device_initcall, which as
can be seen above, comes quite late in the ordering.

Currently the mm_kobj is created with __initcall in mm_sysfs_init().
This means that any other initcalls that want to reference the mm_kobj
have to be device_initcall (or later), otherwise we will for example,
trip the BUG_ON(!kobj) in sysfs's internal_create_group().  This
unfairly restricts those users; for example something that clearly makes
sense to be an arch_initcall will not be able to choose that.

However, upon examination, it is only this way for historical reasons
(i.e.  simply not reprioritized yet).  We see that sysfs is ready quite
earlier in init/main.c via:

 vfs_caches_init
 |_ mnt_init
    |_ sysfs_init

well ahead of the processing of the prioritized calls listed above.

So we can recategorize mm_sysfs_init to be a pure_initcall, which in
turn allows any mm_kobj initcall users a wider range (1 --> 7) of
initcall priorities to choose from.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:52 -08:00
Peter Zijlstra 90572890d2 mm: numa: Change page last {nid,pid} into {cpu,pid}
Change the per page last fault tracking to use cpu,pid instead of
nid,pid. This will allow us to try and lookup the alternate task more
easily. Note that even though it is the cpu that is store in the page
flags that the mpol_misplaced decision is still based on the node.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1381141781-10992-43-git-send-email-mgorman@suse.de
[ Fixed build failure on 32-bit systems. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09 14:47:45 +02:00
Mel Gorman b795854b1f sched/numa: Set preferred NUMA node based on number of private faults
Ideally it would be possible to distinguish between NUMA hinting faults that
are private to a task and those that are shared. If treated identically
there is a risk that shared pages bounce between nodes depending on
the order they are referenced by tasks. Ultimately what is desirable is
that task private pages remain local to the task while shared pages are
interleaved between sharing tasks running on different nodes to give good
average performance. This is further complicated by THP as even
applications that partition their data may not be partitioning on a huge
page boundary.

To start with, this patch assumes that multi-threaded or multi-process
applications partition their data and that in general the private accesses
are more important for cpu->memory locality in the general case. Also,
no new infrastructure is required to treat private pages properly but
interleaving for shared pages requires additional infrastructure.

To detect private accesses the pid of the last accessing task is required
but the storage requirements are a high. This patch borrows heavily from
Ingo Molnar's patch "numa, mm, sched: Implement last-CPU+PID hash tracking"
to encode some bits from the last accessing task in the page flags as
well as the node information. Collisions will occur but it is better than
just depending on the node information. Node information is then used to
determine if a page needs to migrate. The PID information is used to detect
private/shared accesses. The preferred NUMA node is selected based on where
the maximum number of approximately private faults were measured. Shared
faults are not taken into consideration for a few reasons.

First, if there are many tasks sharing the page then they'll all move
towards the same node. The node will be compute overloaded and then
scheduled away later only to bounce back again. Alternatively the shared
tasks would just bounce around nodes because the fault information is
effectively noise. Either way accounting for shared faults the same as
private faults can result in lower performance overall.

The second reason is based on a hypothetical workload that has a small
number of very important, heavily accessed private pages but a large shared
array. The shared array would dominate the number of faults and be selected
as a preferred node even though it's the wrong decision.

The third reason is that multiple threads in a process will race each
other to fault the shared page making the fault information unreliable.

Signed-off-by: Mel Gorman <mgorman@suse.de>
[ Fix complication error when !NUMA_BALANCING. ]
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-30-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09 12:40:35 +02:00
Tim Chen 917d9290af mm: tune vm_committed_as percpu_counter batching size
Currently the per cpu counter's batch size for memory accounting is
configured as twice the number of cpus in the system.  However, for
system with very large memory, it is more appropriate to make it
proportional to the memory size per cpu in the system.

For example, for a x86_64 system with 64 cpus and 128 GB of memory, the
batch size is only 2*64 pages (0.5 MB).  So any memory accounting
changes of more than 0.5MB will overflow the per cpu counter into the
global counter.  Instead, for the new scheme, the batch size is
configured to be 0.4% of the memory/cpu = 8MB (128 GB/64 /256), which is
more inline with the memory size.

I've done a repeated brk test of 800KB (from will-it-scale test suite)
with 80 concurrent processes on a 4 socket Westmere machine with a total
of 40 cores.  Without the patch, about 80% of cpu is spent on spin-lock
contention within the vm_committed_as counter.  With the patch, there's
a 73x speedup on the benchmark and the lock contention drops off almost
entirely.

[akpm@linux-foundation.org: fix section mismatch]
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Mel Gorman a4e1b4c6c6 mm: init: report on last-nid information stored in page->flags
Answering the question "how much space remains in the page->flags" is
time-consuming.  mminit_loglevel can help answer the question but it
does not take last_nid information into account.  This patch corrects it
and while there it corrects the messages related to page flag usage,
pgshifts and node/zone id.  When applied the relevant output looks
something like this but will depend on the kernel configuration.

  mminit::pageflags_layout_widths Section 0 Node 9 Zone 2 Lastnid 9 Flags 25
  mminit::pageflags_layout_shifts Section 19 Node 9 Zone 2 Lastnid 9
  mminit::pageflags_layout_pgshifts Section 0 Node 55 Zone 53 Lastnid 44
  mminit::pageflags_layout_nodezoneid Node/Zone ID: 64 -> 53
  mminit::pageflags_layout_usage location: 64 -> 44 layout 44 -> 25 unused 25 -> 0 page-flags

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:18 -08:00
Paul Gortmaker b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Marcin Slusarz 759f9a2df7 mm: mminit_loglevel cannot be __meminitdata anymore
mminit_loglevel is now used from mminit_verify_zonelist <- build_all_zonelists <-

1. online_pages <- memory_block_action <- memory_block_change_state <- store_mem_state (sys handler)
2. numa_zonelist_order_handler (proc handler)

so it cannot be annotated __meminit - drop it

fixes following section mismatch warning:
WARNING: vmlinux.o(.text+0x71628): Section mismatch in reference from the function mminit_verify_zonelist() to the variable .meminit.data:mminit_loglevel
The function mminit_verify_zonelist() references
the variable __meminitdata mminit_loglevel.
This is often because mminit_verify_zonelist lacks a __meminitdata
annotation or the annotation of mminit_loglevel is wrong.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:30 -07:00
Andrew Morton 5c9ffc9c3d mm_init.c: avoid ifdef-inside-macro-expansion
gcc-3.2:

  mm/mm_init.c:77:1: directives may not be used inside a macro argument
  mm/mm_init.c:76:47: unterminated argument list invoking macro "mminit_dprintk"
  mm/mm_init.c: In function `mminit_verify_pageflags_layout':
  mm/mm_init.c:80: `mminit_dprintk' undeclared (first use in this function)
  mm/mm_init.c:80: (Each undeclared identifier is reported only once
  mm/mm_init.c:80: for each function it appears in.)
  mm/mm_init.c:80: syntax error before numeric constant

Also fix a typo in a comment.

Reported-by: Adrian Bunk <bunk@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05 14:33:46 -07:00
Nishanth Aravamudan ff7ea79cf7 mm: create /sys/kernel/mm
Add a kobject to create /sys/kernel/mm when sysfs is mounted.  The kobject
will exist regardless.  This will allow for the hugepage related sysfs
directories to exist under the mm "subsystem" directory.  Add an ABI file
appropriately.

[kosaki.motohiro@jp.fujitsu.com: fix build]
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:17 -07:00
Nishanth Aravamudan 5e9426abe2 mm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT
Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:17 -07:00
Mel Gorman 68ad8df42e mm: print out the zonelists on request for manual verification
This patch prints out the zonelists during boot for manual verification by the
user if the mminit_loglevel is MMINIT_VERIFY or higher.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:14 -07:00
Mel Gorman 708614e618 mm: verify the page links and memory model
Print out information on how the page flags are being used if mminit_loglevel
is MMINIT_VERIFY or higher and unconditionally performs sanity checks on the
flags regardless of loglevel.

When the page flags are updated with section, node and zone information, a
check are made to ensure the values can be retrieved correctly.  Finally we
confirm that pfn_to_page and page_to_pfn are the correct inverse functions.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Mel Gorman 6b74ab97bc mm: add a basic debugging framework for memory initialisation
Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00