- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
Removing the include of cpu.h from of_device.h causes an error:
drivers/irqchip/irq-loongson-eiointc.c:420:9: error: implicit declaration of function 'cpuhp_setup_state_nocalls' [-Werror=implicit-function-declaration]
This driver doesn't even use DT, so all the DT includes can be dropped.
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-17-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
When support suspend/resume for loongson-eiointc, the syscore_ops
is registered twice in dual-bridges machines where there are two
eiointc IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list. Also, cpuhp_setup_state_nocalls is only
needed to call for once. So the patch will corret them.
Fixes: a90335c2df ("irqchip/loongson-eiointc: Add suspend/resume support")
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-4-lvjianmin@loongson.cn
In eiointc_acpi_init(), a *eiointc* node is passed into
acpi_get_vec_parent() instead of a required *NUMA* node (on some chip
like 3C5000L, a *NUMA* node means a *eiointc* node, but on some chip
like 3C5000, a *NUMA* node contains 4 *eiointc* nodes), and node in
struct acpi_vector_group is essentially a *NUMA* node, which will
lead to no parent matched for passed *eiointc* node. so the patch
adjusts code to use *NUMA* node for parameter node of
acpi_set_vec_parent/acpi_get_vec_parent.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-3-lvjianmin@loongson.cn
In pch_pic_parse_madt(), a NULL parent pointer will be
returned from acpi_get_vec_parent() for second pch-pic domain
related to second bridge while calling eiointc_acpi_init() at
first time, where the parent of it has not been initialized
yet, and will be initialized during second time calling
eiointc_acpi_init(). So, it's reasonable to return zero so
that failure of acpi_table_parse_madt() will be avoided, or else
acpi_cascade_irqdomain_init() will return and initialization of
followed pch_msi domain will be skipped.
Although it does not matter when pch_msi_parse_madt() returns
-EINVAL if no invalid parent is found, it's also reasonable to
return zero for that.
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-2-lvjianmin@loongson.cn
1, Adjust the return of acpi_cascade_irqdomain_init() and check its
return value.
2, Combine unnecessary short lines to one long line.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142514.1725514-1-chenhuacai@loongson.cn
The recently merged LoongArch drivers paper over the lack of
topology information by creating a bunch of fwnodes for the
irqchips. So far, so good.
However, irq_domain_alloc_fwnode() is supposed to take a PA, and
not a kernel VA blindly cast as a PA, potentially disclosing
kernel VAs to userspace. In some other cases, even NULL is used
as the PA, which is entertaining.
Fix this by using the actual PA of the block when available,
and switch to a named fwnode in the other cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Link: https://lore.kernel.org/r/20220808105020.2689757-1-maz@kernel.org
Make acpi_get_vec_parent() be a static function, to avoid:
drivers/irqchip/irq-loongson-eiointc.c:289:20: warning: no previous prototype for 'acpi_get_vec_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220804025457.213979-1-chenhuacai@loongson.cn
In multi-node case, csr_any_send() should set EIOINTC_REG_ENABLE of
the first core of target node, not the first core of the whole.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220804025421.211958-1-chenhuacai@loongson.cn
EIOINTC stands for "Extended I/O Interrupts" that described in Section
11.2 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Loongson-3A5000 has 4 cores per NUMA node, and each NUMA node has an
EIOINTC; while Loongson-3C5000 has 16 cores per NUMA node, and each NUMA
node has 4 EIOINTCs. In other words, 16 cores of one NUMA node in
Loongson-3C5000 are organized in 4 groups, each group connects to an
EIOINTC. We call the "group" here as an EIOINTC node, so each EIOINTC
node always includes 4 cores (both in Loongson-3A5000 and Loongson-
3C5000).
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-12-git-send-email-lvjianmin@loongson.cn
Linus Torvalds