This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This will allow accessing the PLL data to get the DSS device pointer,
removing the need to access the global DSS private data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To prepare for the removal of the global variable storing DSS private
data, pass its pointer to the dss_runtime_{get,put}() functions.
As this requires getting hold of the dss_device structure in the
callers, we add a new dss_get_device() function to retrieve it. The
function currently returns a pointer to the global data structure, and
will later be updated to get the pointer from device driver data when
the DSS private structure will be allocated dynamically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The anoonymous dss structure in dss.c is the top-level component in the
omapdss driver. As such it should store all internal instance-specific
data that is currently stored in global variables. This however requires
both naming the structure to pass it around functions, and accessing it
from various locations in the omapdss driver. While we could implement
get and set functions for every field that needs to be accessed outside
of dss.c, that would introduce overhead and complexity that we could
avoid by exposing the structure to internal components of the omapdss
driver. Do so to prepare for removal of global variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
When merging the omapdrm and omapdss drivers there will be not omapdrm
platform device anymore, and thus no associated probe and remove
functions. To prepare for that, split all the initialization code from
the probe function to make it usable without a platform device.
Similarly, split the cleanup code from the remove function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The wait_for_bit_change() function returns the value of the bit it
polls. This requires the caller to compare the return value to the
expected bit value. As all the existing callers need is to check whether
the bit has reached the expected value, it's easier to return a boolean
status from the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_register_driver(), omap_dss_unregister_driver() and
dispc_enable_gamma_table() functions don't exist anymore, remove their
prototypes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is unused, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O, getting clocks or enabling runtime PM) to the
component master bind handler.
This additionally fixes a real PM issue caused enabling runtime PM in
the bind handler.
The bind handler performs the following sequence of PM operations:
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
... (access the hardware to read the device revision) ...
pm_runtime_put_sync(dev);
If a failure occurs at this point, the error path calls
pm_runtime_disable() to balance the pm_runtime_enable() call.
To understand the problem, it should be noted that the bind handler is
called when one of the component registers itself, which happens in the
component's probe handler. Furthermore, as the components are children
of the DSS, the device core calls pm_runtime_get_sync() on the DSS
platform device before calling the component's probe handler. This
increases the DSS power usage count but doesn't runtime resume the
device, as runtime PM is disabled at that point.
The bind handler is thus called with runtime PM disabled, with the
device runtime suspended, but with the power usage count larger than 0.
The pm_runtime_get_sync() call will thus further increase the power
usage count and runtime resume the device. The pm_runtime_put_sync()
handler will decrease the power usage count to a non-zero value and will
thus not suspend the device. Finally, the pm_runtime_disable() call will
disable runtime PM, preventing the pm_runtime_put() call in the device
core from runtime suspending the device. The DSS device is thus left
powered on.
To fix this, move the initialization code from the bind handler to the
probe handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A few functions defined in omapdss-base are internal to the module.
Don't export them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function isn't used outside of its compilation unit, make it static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoder drivers need a handle to the source they are connected to in
order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connector drivers need a handle to the source they are connected to
in order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connector drivers need a handle to the source they are connected to
in order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No panel is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No encoder is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No connector is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The tvc_of_match variable is never referenced before its definition.
Remove the forward declaration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The kernel favours 'unsigned int' over plain 'unsigned'. Replace all
occurences of the latter by the former. This avoid lots of checkpatch
complaints in patches that touch lines where a plain 'unsigned' is used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The standard kernel integer types are [us]{8,16,32}. Use them instead of
the u?int{8,16,32}_t types.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
The omap4 CEC hardware cannot tell a Nack from a Low Drive from an
Arbitration Lost error, so just report a Nack, which is almost
certainly the reason for the error anyway.
This also simplifies the implementation. The only three interrupts
that need to be enabled are:
Transmit Buffer Full/Empty Change event: triggered when the
transmit finished successfully and cleared the buffer.
Receiver FIFO Not Empty event: triggered when a message was received.
Frame Retransmit Count Exceeded event: triggered when a transmit
failed repeatedly, usually due to the message being Nacked. Other
reasons are possible (Low Drive, Arbitration Lost) but there is no
way to know. If this happens the TX buffer needs to be cleared
manually.
While testing various error conditions I noticed that the hardware
can receive messages up to 18 bytes in total, which exceeds the legal
maximum of 16. This could cause a buffer overflow, so we check for
this and constrain the size to 16 bytes.
The old incorrect interrupt handler could cause the CEC framework to
enter into a bad state because it mis-detected the "Start Bit Irregularity
event" as an ARB_LOST transmit error when it actually is a receive error
which should be ignored.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Henrik Austad <haustad@cisco.com>
Tested-by: Henrik Austad <haustad@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Currently, calls into each file are used to register the various
platform drivers. Change this to a table of pointers to platform_driver
structs to allow using platform_register_drivers.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Having the filename in the header serves little purpose and is
often wrong after renames as it is here in several places, just
drop it from all omapdrm files.
While we are here unify the copyright tags to the TI recommended style.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.
The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To help diagnose DMM errors, print out information if any of the error bits
are set in the interrupt status register.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the wait_status() fails either because of an error reported in the
STATUS register or because of a timeout waiting for the wait_mask, print
information which might help diagnose the reason.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The error bit definitions are typoed in DMM_IRQSTAT_ERR_MASK which went
unnoticed since the DMM_IRQSTAT_ERR_MASK was not used.
Change the bit definitions to the correct ones.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The number of function declarations in the omap_drv.h degrades
readability. To fix it, create new header files for each part of the
driver and move the related functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The venc_probe_of() function has an error cleanup path that returns
success instead of an error code. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dpi_data structure port_initialized field is used to check in the
cleanup path whether the DPI has been initialized. This can be performed
through the associated device_node data field instead. Remove the
port_initialized field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function isn't used outside of its compilation unit, make it static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When merging the omapdrm and omapdss drivers the omapdrm virtual
platform device will disappear, and the omapdss platform device will be
used for DMA memory allocation. To prepare for that, set the DMA
coherent mask for the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_find_device() function is unused. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_gem_resume() function is internal to the driver. Pass it a
drm_device pointer that the caller already has instead of looking it up
from device data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no need to print an error message on probe deferral, that's a
normal situation. Probe deferral debugging can be performed by enabling
the related debug messages in the drivers core.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the new descriptor based GPIO API instead of
the legacy one, which results in cleaner code
with less lines of code.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Droid 4 has a command mode DSI panel, which does not have/use
DSI based backlight support. This adds proper support for this
using a backlight phandle property, which follows the common
panel binding.
If no backlight phandle is found, it is assumed, that the
native backlight should be used instead. This is used by
the Nokia N950.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add support to load physical size information from DT using
the properties defined by the common panel binding.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add support for regulators used by panels found inside
of the Nokia N950, N9 and Motorola Droid 4.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This adds support for get_timings() and check_timings()
to get the driver working and properly initializes the
timing information from DT.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
While physical size information is automatically parsed for EDID
based displays, we need to provide it manually for displays providing
one fixed mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The wrappers have been removed in commit 5a35876e28
(drm: omapdrm: Remove manual update display support)
and will not be reintroduced, since the normal sys
functions properly call the dirty callback.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Remove driver (un)register API defines. They do not even exist
anymore.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If we have memory bandwidth limit configured, reject the modes which would
require more bandwidth than the limit if it is used with one full
resolution plane (most common use case).
This filtering is not providing full protection as it is possible that
application would pick smaller crtc resolution with high resolution planes
and down scaling, or can enable more smaller planes where the sum of their
bandwidth need would be higher than the limit.
This patch only allows us to filter out modes which would need more
bandwidth if they were used with one full screen plane.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The get_memory_bandwidth_limit() in dispc_ops can be used to query the
memory bandwidth limit of dispc by upper layers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Laurent Pinchart