This patch fixes a bug in kgd_set_pasid_vmid_mapping(), where the function
only updated the ATC registers (IOMMU) with the new VMID <--> PASID mapping,
but didn't update the IH (Interrupt) registers.
The bug only occurs when using non-HWS mode. In HWS mode, the CP automatically
does the VMID <--> PASID mapping.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Enable smc fan control for CI boards. Should
reduce the fan noise on systems with a higher
default fan profile.
v2: disable by default, add additional fan setup, rpm control
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73338
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the interface between the radeon driver and the amdkfd driver.
The interface implementation is contained in radeon_kfd.c and radeon_kfd.h.
The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside radeon_device structure.
All the register accesses that amdkfd need are done using this interface. This
allows us to avoid direct register accesses in amdkfd proper, while also
avoiding locking between amdkfd and radeon.
The single exception is the doorbells that are used in both of the drivers.
However, because they are located in separate pci bar pages, the danger of
sharing registers between the drivers is minimal.
Having said that, we are planning to move the doorbells as well to radeon.
v3:
Add interface for sa manager init and fini. The init function will allocate a
buffer on system memory and pin it to the GART address space via the radeon sa
manager.
All mappings of buffers to GART address space are done via the radeon sa
manager. The interface of allocate memory will use the radeon sa manager to sub
allocate from the single buffer that was allocated during the init function.
Change lower_32/upper_32 calls to use linux macros
Add documentation for the interface
v4:
Change ptr field type in kgd_mem from uint32_t* to void* to match to type that
is returned by radeon_sa_bo_cpu_addr
v5:
Change format of mqd structure to work with latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Move generic kfd-->kgd interface and other generic kgd definitions to a generic
header file that will be used by AMD's radeon and amdgpu drivers
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
To support HSA on KV, we need to limit the number of vmids and pipes
that are available for radeon's use with KV.
This patch reserves VMIDs 8-15 for amdkfd (so radeon can only use VMIDs
0-7) and also makes radeon thinks that KV has only a single MEC with a single
pipe in it
v3: Use define for static vmid allocation in radeon
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Volatile bit was in the wrong location. This bit is
not used at the moment.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Merge drm-fixes into drm-next.
Both i915 and radeon need this done for later patches.
Conflicts:
drivers/gpu/drm/drm_crtc_helper.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem_execbuffer.c
drivers/gpu/drm/i915/i915_gem_gtt.c
This patch makes it possible to decide how many address
bits are spend on the page directory vs the page tables.
v2: remove unintended change
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing the update pending bit directly after issuing an
update is nonsense cause depending on the pixel clock the
CRTC needs a bit of time to execute the flip even when we
are in the VBLANK period.
This is just a non invasive patch to solve the problem at
hand, a more complete and cleaner solution should follow
in the next merge window.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76564
v2: fix source IDs for CRTC2-6
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Only VCE 2.0 support so far.
v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: Christian König <christian.koenig@amd.com>
pci config reset is a low level reset that resets
the entire chip from the bus interface. It can
be more reliable if soft reset fails.
v2: fix rebase
v3: hide behind module parameter
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The formula needs to be adjusted since there are 4 RBs
per SH rather than 2 as on previous asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The FMT blocks control how data is sent from the backend
of the display pipe to to monitor. Proper set up of the
FMT blocks are required for 30bpp formats. Additionally,
dithering can be enabled on for better display with 18 and
24bpp displays. The exception is LVDS/eDP which atom
takes care of in the SelectCRTC_Source table. For now
just enable truncation until we test dithering more.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to allocate line buffer to each display when
setting up the watermarks. Failure to do so can lead
to a blank screen. This fixes blank screen problems
on dce8 asics.
Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- use new cg/pg flags for finer grained clock and
powergating control
- restructure the cg/pg code so it can be called from
other components such as dpm
v2: fix build breakage from rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for btc asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen switching
Set radeon.dpm=1 to enable.
v2: remove unused radeon_atombios.c changes,
make missing smc ucode non-fatal
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for KB/KV asics. This includes:
- dynamic engine clock scaling
- dynamic voltage scaling
- power containment
- shader power scaling
Set radeon.dpm=1 to enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On CIK, the compute rings work slightly differently than
on previous asics, however the basic concepts are the same.
The main differences:
- New MEC engines for compute queues
- Multiple queues per MEC:
- CI/KB: 1 MEC, 4 pipes per MEC, 8 queues per pipe = 32 queues
- KV: 2 MEC, 4 pipes per MEC, 8 queues per pipe = 64 queues
- Queues can be allocated and scheduled by another queue
- New doorbell aperture allows you to assign space in the aperture
for the wptr which allows for userspace access to queues
v2: add wptr shadow, fix eop setup
v3: fix comment
v4: switch to new callback method
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
v2: agd5f: fix clock dividers setup for bonaire
v3: agd5f: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CIK has new asynchronous DMA engines called sDMA
(system DMA). Each engine supports 1 ring buffer
for kernel and gfx and 2 userspace queues for compute.
TODO: fill in the compute setup.
v2: update to the latest reset code
v3: remove ib_parse
v4: fix copy_dma()
v5: drop WIP compute sDMA queues
v6: rebase
v7: endian fixes for IB
v8: cleanup for release
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLC handles the interrupt controller and other tasks
on the GPU.
v2: add documentation
v3: update programming sequence
v4: additional setup
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx ring only. Compute is still todo.
v2: add documentation
v3: update to latest reset changes, integrate emit update patch.
v4: fix count on wait_reg_mem for HDP flush
v5: use old hdp flush method for fence
v6: set valid bit for IB
v7: cleanup for release
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets up the GFX ring and loads ucode for GFX and Compute.
Todo:
- handle compute queue setup.
v2: add documentation
v3: integrate with latest reset changes
v4: additional init fixes
v5: scratch reg write back no longer supported on CIK
v6: properly set CP_RB0_BASE_HI
v7: rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Redirect invalid memory accesses to the default page
instead of locking up the memory controller.
v2: rebase on top of 2 level PTs
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm callbacks are the same as the SI ones right now
(same regs and bits). We could share the SI variants, and
I may yet do that, but I figured I would add CIK specific
ones for now in case we need to change anything.
V2: add documentation, minor fixes.
V3: integrate vram offset fixes for APUs
V4: enable 2 level VM PTs
V5: index SH_MEM_* regs properly
V6: add ib_parse()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: split soft reset into compute and gfx. Still need
to make reset more fine grained, but this should be a
start.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu