These three consoles share a device, the MX23L4005, which contains a
clock and 64 bytes of SRAM storage, and is exposed on the EXI bus
(similar to SPI) on channel 0, device 1. This driver allows it to be
used as a Linux RTC device, where time can be read and set.
The hardware also exposes two timers, one which shuts down the console
and one which powers it on, but these aren’t supported currently.
On the Wii U, the counter bias is stored in a XML file, /config/rtc.xml,
encrypted in the SLC (eMMC storage), using a proprietary filesystem. In
order to avoid having to implement all that, this driver assumes a
bootloader will parse this XML file and write the bias into the SRAM, at
the same location the other two consoles have it.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211215175501.6761-2-linkmauve@linkmauve.fr
This adds support for the RTC block on the Mstar MSC313e SoCs and newer.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210823171613.18941-3-romain.perier@gmail.com
The current implementation of rtc_time64_to_tm() contains unnecessary
loops, branches and look-up tables. The new one uses an arithmetic-based
algorithm appeared in [1] and is approximately 4.3 times faster (YMMV).
The drawback is that the new code isn't intuitive and contains many 'magic
numbers' (not unusual for this type of algorithm). However, [1] justifies
all those numbers and, given this function's history, the code is unlikely
to need much maintenance, if any at all.
Add a KUnit test case that checks every day in a 160,000 years interval
starting on 1970-01-01 against the expected result. Add a new config
RTC_LIB_KUNIT_TEST symbol to give the option to run this test suite.
[1] Neri, Schneider, "Euclidean Affine Functions and Applications to
Calendar Algorithms". https://arxiv.org/abs/2102.06959
Signed-off-by: Cassio Neri <cassio.neri@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210624201343.85441-1-cassio.neri@gmail.com
With this driver, mainline Linux can keep its time and date in sync with
the vendor kernel.
Advanced functionality like alarm and automatic power-on is not yet
supported.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210120154158.1860736-2-arnd@kernel.org
rtc_set_ntp_time() is not really RTC functionality as the code is just a
user of RTC. Move it into the NTP code which allows further cleanups.
Requested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.166871172@linutronix.de
The unicore32 port is removed from the kernel.
There is no point to keep stale RTC driver for this architecture.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
- New Device Support
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
- New Functionality
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
- Fix-ups
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
- Bug Fixes
- Fix PCI IDs; intel-lpss-pci
-----BEGIN PGP SIGNATURE-----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=hJ2o
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"
* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
Subsystem:
- The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and
only the 64bit version remain.
- hctosys now works with drivers compiled as modules
New driver:
- MediaTek MT2712 SoC based RTC
Drivers:
- set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374,
mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i
- ds1307: DS1388 oscillator failure detection and watchdog support
- jz4740: JZ4760 support
- pcf85063: clock out pin support
- sun6i: external 32k oscillator is now optional, the range is now handled by
the core, providing a solution for 2034.
-----BEGIN PGP SIGNATURE-----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=6Veu
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More cleanup this cycle, with the final goal of removing the
rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
been modified for this now are ready for the end of times (whether it
happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
single new driver and the usual fixes and features.
Summary:
Subsystem:
- The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
removed and only the 64bit version remain.
- hctosys now works with drivers compiled as modules
New driver:
- MediaTek MT2712 SoC based RTC
Drivers:
- set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
starfire, sun6i
- ds1307: DS1388 oscillator failure detection and watchdog support
- jz4740: JZ4760 support
- pcf85063: clock out pin support
- sun6i: external 32k oscillator is now optional, the range is now
handled by the core, providing a solution for 2034"
* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
rtc: ds1307: check for failed memory allocation on wdt
rtc: class: remove redundant assignment to variable err
rtc: remove rtc_time_to_tm and rtc_tm_to_time
rtc: sun6i: let the core handle rtc range
rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: ds1307: add support for watchdog timer on ds1388
rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
rtc: da9052: set range
rtc: da9052: convert to devm_rtc_allocate_device
rtc: imx-sc: Align imx sc msg structs to 4
rtc: fsl-ftm-alarm: report alarm to core
rtc: pcf85063: Add pcf85063 clkout control to common clock framework
rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
rtc: class: avoid unnecessary lookup in hctosys
dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
rtc: jz4740: Rename vendor-specific DT properties
rtc: jz4740: Add support for JZ4760 SoC
rtc: class: support hctosys from modular RTC drivers
rtc: pm8xxx: clear alarm register when alarm is not enabled
rtc: omap: drop unused dt-bindings header
...
Add an RTC driver for the RTC device on Ricoh MFD RC5T619,
which is implemented as a variant of RN5T618.
rtc-range output:
Testing 2000-02-28 23:59:59.
OK
Testing 2038-01-19 03:14:07.
OK
Testing 2069-12-31 23:59:59.
OK
Testing 2099-12-31 23:59:59.
KO RTC_RD_TIME returned 22 (line 138)
Testing 2100-02-28 23:59:59.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2106-02-07 06:28:15.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2262-04-11 23:47:16.
KO RTC_SET_TIME returned 34 (line 122)
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Due to distribution constraints it may not be possible to statically
compile the required RTC driver into the kernel.
Expand RTC_HCTOSYS support to cover all RTC devices (statically compiled
or not) by checking at the end of RTC device registration whether the
time should be synced.
Signed-off-by: Steve Muckle <smuckle@google.com>
Link: https://lore.kernel.org/r/20191106194625.116692-1-smuckle@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Drop the separate driver that registers the EFI rtc on all EFI
systems that have runtime services available, and instead, move
the registration into the core EFI code, and make it conditional
on whether the actual time related services are available.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
For the platforms including LS1012A, LS1021A, LS1028A, LS1043A,
LS1046A, LS1088A, LS208xA that has the FlexTimer
module, implementing alarm functions within RTC subsystem
to wakeup the system when system going to sleep (work with RCPM driver).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Amlogic Meson GX SoCs uses a special register to store the
time in seconds to wakeup after a system suspend.
In order to be able to reuse the RTC wakealarm feature, this
driver implements a fake RTC device which uses the system time
to deduce a suspend delay.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: rebase to v5.3-rc, rework and modernization]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Support RTC block in ROHM bd70528 power management IC. Support
getting and setting the time and date as well as arming an alarm
which can also be used to wake the PMIC from standby state.
HW supports wake interrupt only for the next 24 hours (sec, minute
and hour information only) so we limit also the alarm interrupt to
this 24 hours for the sake of consistency.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Read and writes the time to the non-battery backed RTC in the ASPEED BMC
system on chip families.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
1. SPDX identifier cleanup for platform/chrome
2. Cleanup series between mfd and chrome/platform, moving
cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome.
3. Wilco EC driver
4. Maintainership change to new group repository.
-----BEGIN PGP SIGNATURE-----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=2nC0
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
- SPDX identifier cleanup for platform/chrome
- Cleanup series between mfd and chrome/platform, moving cros-ec
attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome
- Wilco EC driver
- Maintainership change to new group repository
* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: fix wilco-ec dependencies
platform/chrome: wilco_ec: Add RTC driver
platform/chrome: wilco_ec: Add support for raw commands in debugfs
platform/chrome: Add new driver for Wilco EC
platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
platform/chrome: cros_ec_sysfs: remove pr_fmt() define
platform/chrome: cros_ec_lightbar: remove pr_fmt() define
platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
platform/chrome: cros_ec_spi: switch to SPDX identifier
platform/chrome: cros_ec_proto: switch to SPDX identifier
platform/chrome: cros_ec_lpc: switch to SPDX identifier
platform/chrome: cros_ec_i2c: switch to SPDX identifier
platform/chrome: cros_ec_vbc: switch to SPDX identifier
platform/chrome: cros_ec_sysfs: switch to SPDX identifier
platform/chrome: cros_ec_lightbar: switch to SPDX identifier
platform/chrome: cros_ec_debugfs: switch to SPDX identifier
platform/chrome: cromeos_pstore: switch to SPDX identifier
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.
The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.
To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar
module with I2C interface.
Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock
Module that incorporates an integrated CMOS circuit together with an XTAL.
It has an i2c interface.
The driver handles date/time, alarms, trickle charging, timestamping,
frequency offset correction, EEPROM and NVRAM.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8,
Meson8b and Meson8m2 SoCs.
The RTC is split in to two parts, which are both managed by this driver:
- the AHB front end
- and a simple serial connection to the actual registers
The RTC_COUNTER register which holds the time is 32-bits wide.
There are four 32-bit wide (in total: 16 bytes) "regmem" registers which
are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store
data which needs to survive a suspend / resume cycle.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[resurrected Ben's patches after 2 years]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch adds a driver for Cadence RTC controller.
It can be enabled with RTC_DRV_CADENCE Kconfig option.
It supports waking system from sleep modes.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The sd3078 is a combination RTC and SRAM device with I2C interface.
Signed-off-by: Dianlong Li <long17.cool@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rename core files so there is a clearer separation between the RTC core and
the RTC drivers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and secure rtc etc..
This patch adds i.MX system controller RTC driver support,
Linux kernel has to communicate with system controller via MU
(message unit) IPC to set/get RTC time and other alarm functions,
since the RTC set time needs to be done in secure EL3 mode (required
by system controller firmware) and alarm functions needs to be done
with general MU IRQ handle, these depend on other components which
are NOT ready, so this patch ONLY enables the RTC time read.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Subsystem:
- Add tracepoints
- Rework of the RTC/nvmem API to allow drivers to discard struct nvmem_config
after registration
- New range API, drivers can now expose the useful range of the RTC
- New offset API the core is now able to add an offset to the RTC time,
modifying the supported range.
- Multiple rtc_time64_to_tm fixes
- Handle time_t overflow on 32 bit platforms in the core instead of letting
drivers do crazy things.
- remove rtc_control API
New driver:
- Intersil ISL12026
Drivers:
- Drivers exposing the RTC non volatile memory have been converted to use nvmem
- Removed useless time and date validation
- Removed an indirection pattern that was a cargo cult from ancient drivers
- Removed VLA usage
- Fixed a possible race condition in probe functions
- AB8540 support is dropped from ab8500
- pcf85363 now has alarm support
-----BEGIN PGP SIGNATURE-----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=l9i8
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This contains a few series that have been in preparation for a while
and that will help systems with RTCs that will fail in 2038, 2069 or
2100.
Subsystem:
- Add tracepoints
- Rework of the RTC/nvmem API to allow drivers to discard struct
nvmem_config after registration
- New range API, drivers can now expose the useful range of the RTC
- New offset API the core is now able to add an offset to the RTC
time, modifying the supported range.
- Multiple rtc_time64_to_tm fixes
- Handle time_t overflow on 32 bit platforms in the core instead of
letting drivers do crazy things.
- remove rtc_control API
New driver:
- Intersil ISL12026
Drivers:
- Drivers exposing the RTC non volatile memory have been converted to
use nvmem
- Removed useless time and date validation
- Removed an indirection pattern that was a cargo cult from ancient
drivers
- Removed VLA usage
- Fixed a possible race condition in probe functions
- AB8540 support is dropped from ab8500
- pcf85363 now has alarm support"
* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
rtc: snvs: Fix usage of snvs_rtc_enable
rtc: mt7622: fix module autoloading for OF platform drivers
rtc: isl12022: use true and false for boolean values
rtc: ab8500: Drop AB8540 support
rtc: remove a warning during scripts/kernel-doc step
rtc: 88pm860x: remove artificial limitation
rtc: 88pm80x: remove artificial limitation
rtc: st-lpc: remove artificial limitation
rtc: mrst: remove artificial limitation
rtc: mv: remove artificial limitation
rtc: hctosys: Ensure system time doesn't overflow time_t
parisc: time: stop validating rtc_time in .read_time
rtc: pcf85063: fix clearing bits in pcf85063_start_clock
rtc: at91sam9: Set name of regmap_config
rtc: s5m: Remove VLA usage
rtc: s5m: Move enum from rtc.h to rtc-s5m.c
rtc: remove VLA usage
rtc: Add useful timestamp definitions
rtc: Add one offset seconds to expand RTC range
rtc: Factor out the RTC range validation into rtc_valid_range()
...
The blackfin architecture is getting removed, so this one is
now obsolete.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tile architecture is getting removed, so this driver is
no longer needed.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ISL12026 is a combination RTC and EEPROM device with I2C
interface. The standard RTC driver interface is provided. The EEPROM
is accessed via the NVMEM interface.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since PLATFORM_AT32AP is an AVR32 platform which was removed, the
rtc driver rtc-at32ap700x is useless.
This patch remove it.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53.
This is driver enables support for the low power domain SRTC features:
- 32-bit MSB of non-rollover time counter
- 32-bit alarm register
Select the new config option RTC_DRV_MXC_V2 to build this driver
Based on:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
On platforms with a Chrome OS EC, the EC can function as a simple RTC.
Add a basic driver with this functionality.
Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subsystem:
- Fix setting the alarm to the next expiring timer
New driver:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers:
- Use generic nvmem to expose the Non volatile ram for ds1305, ds1511,
m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume
-----BEGIN PGP SIGNATURE-----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=tRVi
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is nothing scary this cycle, mostly driver fixes and updates.
The core fix has been in for a while and has been tested on multiple
kernel revisions by multiple teams.
Core:
- Fix setting the alarm to the next expiring timer
New drivers:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers updates:
- Use generic nvmem to expose the Non volatile ram for ds1305,
ds1511, m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume"
* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
dt-bindings: rtc: imxdi: Improve the bindings text
rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
rtc: at91rm9200: fix reading alarm value
rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
rtc: sysfs: Use time64_t variables to set time/alarm
rtc: xgene: mark PM functions as __maybe_unused
rtc: xgene: Fix suspend/resume
rtc: pcf8563: don't alway enable the alarm
rtc: pcf8563: fix output clock rate
rtc: rx8010: Fix for incorrect return value
rtc: rx8010: Specify correct address for RX8010_RESV31
rtc: rx8010: Remove duplicate define
rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
rtc: m41t80: fix m41t80_sqw_round_rate return value
rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
rtc: add support for NXP PCF85363 real-time clock
rtc: omap: Support scratch registers
...
This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Note that alarms are not currently implemented.
64 bytes of nvmem is supported and exposed in
sysfs (# is the instance number, starting with 0):
/sys/bus/nvmem/devices/pcf85363-#/nvmem
Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the driver for the RTC on MT7622 SoC.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and
mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.
The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and
Beelink Lake I.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Vincent Shih
Dianlong Li