Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
After much discussion, give up on only passing a subset of SCSI commands
to userspace and pass them all. Based on what pscsi is doing, make sure
to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to
pscsi.
Make hw_block_size configurable via dev param.
Remove mention of command filtering from tcmu-design.txt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
We now require that the userspace handler set a bit if the command is not
handled.
Update calls to tcmu_hdr_get_op for v2.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
See https://bugzilla.redhat.com/show_bug.cgi?id=1025672
We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.
This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e6,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.
(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The following error message is seen when loading the nct6683 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following error message is seen when loading the nct6775 driver
with DEBUG_LOCK_ALLOC enabled.
BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)
Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This fixes a bug uncovered by a recent driver core change that
modified the implementation of the ACPI_COMPANION_SET() macro to
strictly rely on its second argument to be either NULL or a valid
pointer to struct acpi_device.
As it turns out, pcibios_root_bridge_prepare() on x86 and ia64
works with the assumption that the only code path calling
pci_create_root_bus() is pci_acpi_scan_root() and therefore
the sysdata argument passed to it will always match the
expectations of pcibios_root_bridge_prepare(). That need not
be the case, however, and in particular it is not the case for
the Xen pcifront driver that passes a pointer to its own private
data strcture as sysdata to pci_scan_bus_parented() which then
passes it to pci_create_root_bus() and it ends up being used
incorrectly by pcibios_root_bridge_prepare().
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ulKW
-----END PGP SIGNATURE-----
Merge tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PCI / ACPI fix from Rafael Wysocki:
"This fixes a bug uncovered by a recent driver core change that
modified the implementation of the ACPI_COMPANION_SET() macro to
strictly rely on its second argument to be either NULL or a valid
pointer to struct acpi_device.
As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works
with the assumption that the only code path calling pci_create_root_bus()
is pci_acpi_scan_root() and therefore the sysdata argument passed to
it will always match the expectations of pcibios_root_bridge_prepare().
That need not be the case, however, and in particular it is not the
case for the Xen pcifront driver that passes a pointer to its own
private data strcture as sysdata to pci_scan_bus_parented() which then
passes it to pci_create_root_bus() and it ends up being used incorrectly
by pcibios_root_bridge_prepare()"
* tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / ACPI: Do not set ACPI companions for host bridges with parents
Changes in this update:
o regression fix for new rename whiteout code
o regression fixes for new superblock generic per-cpu counter code
o fix for incorrect error return sign introduced in 3.17
o metadata corruption fixes that need to go back to -stable kernels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=w5SP
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a little larger than I'd like late in the release cycle, but
all the fixes are for regressions introduced in the 4.1-rc1 merge, or
are needed back in -stable kernels fairly quickly as they are
filesystem corruption or userspace visible correctness issues.
Changes in this update:
- regression fix for new rename whiteout code
- regression fixes for new superblock generic per-cpu counter code
- fix for incorrect error return sign introduced in 3.17
- metadata corruption fixes that need to go back to -stable kernels"
* tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix broken i_nlink accounting for whiteout tmpfile inode
xfs: xfs_iozero can return positive errno
xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
xfs: extent size hints can round up extents past MAXEXTLEN
xfs: inode and free block counters need to use __percpu_counter_compare
percpu_counter: batch size aware __percpu_counter_compare()
xfs: use percpu_counter_read_positive for mp->m_icount
Two weeks worth of small bug fixes this time, nothing sticking out
this time:
- one defconfig change to adapt to a modified Kconfig symbol
- two fixes for i.MX for backwards compatibility with older DT
files that was accidentally broken
- one regression fix for irq handling on pxa
- three small dt files on omap, and one each for imx and exynos
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAVWjV6WCrR//JCVInAQKwABAA4ZCvaRoP5Yc9aIGVZx5/FRSaXQ7pMi39
ORggazaHWZ3NpMDMfVqhBzyeZya3Ad6pjaIsPL83GdcqJgu5O+bNF86f5r4Q5rWK
bvLPQd77ge4SCvqgQw8CgR/05aiLGhMlujKQeIR+P4z21p5OFoPqRjQnAzjWbRde
lm6sO8I3xQybagyjp4y1/uxW4Ukc0fRNM+sMnQbVwRlCM6L+CGGWuyCuAseM8MrH
eGqlHutZTt3/3TB/Y+gerohchxgq2+YVAUFhMoaVl+UUwW0Qk7Ee9roKfruiWuMk
9fvPMeaw/CkwpUSZreGjBPsGINWWRQPleWzWHEvjiOyALooM1h/LRL6JJH/nodnV
w2F4ECjdGxfdEXn4ShMYg8ZfdXMswpB8CaAOFH3dTQyXo4Yy0bfXB3EakiOjmoZW
Nst3vCI0IYq6kLnOOLzNfVZy6VQQtA3oNShCILvHKwyqVkSfX998a365otW5xAXJ
2D2GAjGxNNp+Rg5QJ++OEwQrpha6DtyvuGffIB/DQMLpqkizvMQyK7x+nAvUaKQ7
OdxEs8Npm7i78wd84mNqXKosbq9yHUlbOU7PVlOfjL/JjXi1jDhPBTtKvnSZHTyr
Np0/FI1iJqUf9//L1z8Dz0CE8G/DLQe7NG847HsBkLbqudtNY2Hcr7IOSs9eJdp3
DEG/377/2mM=
=2HQg
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Two weeks worth of small bug fixes this time, nothing sticking out
this time:
- one defconfig change to adapt to a modified Kconfig symbol
- two fixes for i.MX for backwards compatibility with older DT files
that was accidentally broken
- one regression fix for irq handling on pxa
- three small dt files on omap, and one each for imx and exynos"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
ARM: dts: set display clock correctly for exynos4412-trats2
ARM: pxa: pxa_cplds: signedness bug in probe
ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK
ARM: dts: omap3-devkit8000: Fix NAND DT node
ARM: dts: am335x-boneblack: disable RTC-only sleep
ARM: dts: fix imx27 dtb build rule
ARM: dts: imx27: only map 4 Kbyte for fec registers
testing from Junichi Nomura and Bart Van Assche.
Also fix a casting bug in dm_merge_bvec() that could cause only a single
page to be added to a bio (Joe identified this while testing dm-cache
writeback).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVaLGPAAoJEMUj8QotnQNa1pcH/3TumkM0rvl1DK7DfWvjgfpp
+h+whWn79lOUzan/AszRvRU4Pwr7symndnJzJ/tqQ76fm8x84obvKa0jFfB9rmlM
sgw45alqB+AKcKAvocsuDIdzy2/K8FHBihccPWhe87AtJRlj57nTOJWO06gzExOp
/AJ/0Vgv3pxUCL2M4XucpQOV8eUg+gpwjDMxuMEsPVzBVYJfuRvNKoERtd9LSCSV
Y5iqdHCJiW0SWesZNrfthAAlReFzqb1c3mq55G0q0C+Z77Jf3TIPBhVfouM4NOKt
wjQoPavzyAEiKfLFy6QFCjhSOXKCI3klqO7zcyzyygVue5UTHICYRJKn7TFtbfU=
=xGAV
-----END PGP SIGNATURE-----
Merge tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device-mapper fixes from Mike Snitzer:
"Quite a few fixes for DM's blk-mq support thanks to extra DM multipath
testing from Junichi Nomura and Bart Van Assche.
Also fix a casting bug in dm_merge_bvec() that could cause only a
single page to be added to a bio (Joe identified this while testing
dm-cache writeback)"
* tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix casting bug in dm_merge_bvec()
dm: fix reload failure of 0 path multipath mapping on blk-mq devices
dm: fix false warning in free_rq_clone() for unmapped requests
dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY
dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path
dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED
dm: run queue on re-queue
I2C address 0x37 may be used by EEPROMs, which can result in false
positives. Do not attempt to detect a chip at this address.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: fix lx-lsmod refcnt
omfs: fix potential integer overflow in allocator
omfs: fix sign confusion for bitmap loop counter
omfs: set error return when d_make_root() fails
fs, omfs: add NULL terminator in the end up the token list
MAINTAINERS: update CAPABILITIES pattern
fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
tracing/mm: don't trace mm_page_pcpu_drain on offline cpus
tracing/mm: don't trace mm_page_free on offline cpus
tracing/mm: don't trace kmem_cache_free on offline cpus
Two fixes which got lost in my recent distraction. One is a weird
cpumask function which needed to be rewritten, the other is a module
bug which is cc:stable.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wuP+
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull fixes for cpumask and modules from Rusty Russell:
"** NOW WITH TESTING! **
Two fixes which got lost in my recent distraction. One is a weird
cpumask function which needed to be rewritten, the other is a module
bug which is cc:stable"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
cpumask_set_cpu_local_first => cpumask_local_spread, lament
module: Call module notifier on failure after complete_formation()
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user()
return value in case of overlong strings.] causing assembler warnings
and broken code generated in __strnlen_kernel_nocheck_asm:
arch/mips/lib/strnlen_user.S: Assembler messages:
arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set, resulting in the function
looping indefinitely upon mounting NFS root.
Use conditional assembly to avoid a microMIPS code size regression.
Using $at unconditionally would cause such a regression as there are no
16-bit instruction encodings available for ALU operations using this
register. Using $v1 unconditionally would produce short microMIPS
encodings, but would prevent this register from being used across calls
to this function.
The extra LI operation introduced is free, replacing a NOP originally
scheduled into the delay slot of the branch that follows.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
bmips_wr_vec() copies exception vector code from start to dst.
The call to dma_cache_wback() needs to flush (end-start) bytes,
starting at dst, from write-back cache to memory.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull drm fixes from Dave Airlie:
"This is made up 4 groups of fixes detailed below.
vgem:
Due to some misgivings about possible bad use cases this allow,
backout a chunk of the interface to stop those use cases for now.
radeon:
Fix for an oops regression in the audio code, and a partial revert
for a fix that was cauing problems.
nouveau:
regression fix for Fermi, and display-less Maxwell boot fixes.
drm core:
a fix for i915 cursor vblank waiting in the atomic helpers"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gr/gm204: remove a stray printk
drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
drm/nouveau/devinit/gf100: make the force-post condition more obvious
drm/nouveau/gr/gf100-: fix wrong constant definition
drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"
drm/radeon/audio: make sure connector is valid in hotplug case
Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
drm/radeon: don't share plls if monitors differ in audio support
drm/vgem: drop DRIVER_PRIME (v2)
drm/plane-helper: Adapt cursor hack to transitional helpers
No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio.
- Partial revert of widget power-saving for IDT codecs
- Revert mute-LED enum ctl for Thinkpads due to confusion
- A quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- A workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- Another quirk for MS LifeCam USB-audio
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJVaBxyAAoJEGwxgFQ9KSmkcAIP/0Mq9v7Fw0iQ3ciiMIs3oPhW
u8zQu/1J6fjG9FI+3+8iilY6j6xaAV8RScelG/QVpWQ+yZh9OU/hfe8pJtvoX+QU
LbEFjAlOBq0oipcTkrnWI6kU00yI+A5lYpmeJ5Ce+zI3ywlI3jSN7duDiL4We2xR
J6X+cUymdJ9yqjVYatzlq0rd4ONciKLXUhVlm/lBGwJCsQgOIE/0KaKUq0VLsA94
jAaGd3oBzfp2ZgzoS4kiyGQZTJ+Ks/IUyY0MpZhn9YXpZiMW/IxpVl98KHW8kEn0
RqlTxKb2vPtZX340SAzyIVlwAStrQ75XSsw/uqL+4xek3WG2CGdyaPNVCECbUYSe
Ghne23bTusngUUXYj9bzKuRL4APMbVtDO/naTEnd1eymWD5DMZY3MTGehqmvsbyM
aC2PAutBPuR0p1BGc1/mg643dmPHS0FcWULiQjWJ3yy8moPuePzYhoPFZvyHaNfg
yphNRQ8+jqMKbKAJ15IRIw0w7aJiNF/IUY09Ef5QhYrvLJ50aAq9np1rotNUnjSO
6S/imk0z79q9J7HLqFSKJV4hT3wJN2+JAg8G8e1RGbJj1W84IpbtefFnEnZED9zJ
vPzCC/Buw82iMW6cVxOvUlFsW7bFP64dY9lv/+csUa+vZH35T4ghqfq8CrGoMWe6
tnwlABGXvspVgrqroYmq
=84pv
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio:
- partial revert of widget power-saving for IDT codecs
- revert mute-LED enum ctl for Thinkpads due to confusion
- a quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- a workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- another quirk for MS LifeCam USB-audio"
* tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix lost sound due to stream_pm ops cleanup
ALSA: hda - Disable Headphone Mic boost for ALC662
ALSA: hda - Disable power_save_node for IDT92HD71bxx
ALSA: hda - Fix noise on AMD radeon 290x controller
ALSA: hda - Set stream_pm ops automatically by generic parser
ALSA: hda/realtek - Add ALC256 alias name for Dell
Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"
ALSA: usb-audio: Add quirk for MS LifeCam HD-3000
dm_merge_bvec() was originally added in f6fccb ("dm: introduce
merge_bvec_fn"). In that commit a value in sectors is converted to
bytes using << 9, and then assigned to an int. This code made
assumptions about the value of BIO_MAX_SECTORS.
A later commit 148e51 ("dm: improve documentation and code clarity in
dm_merge_bvec") was meant to have no functional change but it removed
the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At
this point the cast from sector_t to int resulted in a zero value. The
fallout being dm_merge_bvec() would only allow a single page to be added
to a bio.
This interim fix is minimal for the benefit of stable@ because the more
comprehensive cleanup of passing a sector_t to all DM targets' merge
function will impact quite a few DM targets.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
dm-multipath accepts 0 path mapping.
# echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev
Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.
However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:
# echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
| dmsetup create mpath1
# echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
device-mapper: reload ioctl on mpath1 failed: Invalid argument
Command failed
With following kernel message:
device-mapper: ioctl: can't change device type after initial table load.
DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.
Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.
Fixes: 65803c2059 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Unfortunately this functionality was merged a little prematurely.
The necessary testing and code review is now complete (or as
complete as it can be) and to code passes a variety of tests
and looks quite sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Y0Vm
-----END PGP SIGNATURE-----
Merge tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md
Pull m,ore md bugfixes gfrom Neil Brown:
"Assorted fixes for new RAID5 stripe-batching functionality.
Unfortunately this functionality was merged a little prematurely. The
necessary testing and code review is now complete (or as complete as
it can be) and to code passes a variety of tests and looks quite
sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety
issues"
* tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md:
md: fix race when unfreezing sync_action
md/raid5: break stripe-batches when the array has failed.
md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
md/raid5: be more selective about distributing flags across batch.
md/raid5: add handle_flags arg to break_stripe_batch_list.
md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list
md/raid5: remove condition test from check_break_stripe_batch_list.
md/raid5: Ensure a batch member is not handled prematurely.
md/raid5: close race between STRIPE_BIT_DELAY and batching.
md/raid5: ensure whole batch is delayed for all required bitmap updates.
Simplify intel_hpd_irq_handler() by extracting HPD irq storm detection
to a separate function.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already set this limit for the GGTT.
This is a temporary patch until a full replacement of size_t variables
(inadequate in 32-bit kernel) is in place.
Regression from:
commit a4e0bedca6
Author: Michel Thierry <michel.thierry@intel.com>
Date: Wed Apr 8 12:13:35 2015 +0100
drm/i915: Use complete address space in true PPGTT
v2: Prettify code and explain why this is needed. (Chris)
v3: Don't hide the compilation warning in 32-bit. (Chris)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Silence the following -Wmaybe-uninitialized warnings and make the code
more clear.
drivers/gpu/drm/i915/intel_display.c: In function ‘__intel_set_mode’:
drivers/gpu/drm/i915/intel_display.c:11844:14: warning: ‘crtc_state’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return state->mode_changed || state->active_changed;
^
drivers/gpu/drm/i915/intel_display.c:11854:25: note: ‘crtc_state’ was declared here
struct drm_crtc_state *crtc_state;
^
drivers/gpu/drm/i915/intel_display.c:11868:6: warning: ‘crtc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (crtc != intel_encoder->base.crtc)
^
drivers/gpu/drm/i915/intel_display.c:11853:19: note: ‘crtc’ was declared here
struct drm_crtc *crtc;
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When stacking request-based dm device on non blk-mq device and
device-mapper target could not map the request (error target is used,
multipath target with all paths down, etc), the WARN_ON_ONCE() in
free_rq_clone() will trigger when it shouldn't.
The warning was added by commit aa6df8d ("dm: fix free_rq_clone() NULL
pointer when requeueing unmapped request"). But free_rq_clone() with
clone->q == NULL is valid usage for the case where
dm_kill_unmapped_request() initiates request cleanup.
Fix this false warning by just removing the WARN_ON -- it only generated
false positives and was never useful in catching the intended case
(completing clone request not being mapped e.g. clone->q being NULL).
Fixes: aa6df8d ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVZalkAAoJEFBXWFqHsHzOk7YH/iQwidJWob015NvrsqUvQlDb
+dIFmUJNFpGqbkLjINDJv0p13lfksuCQ29F/b0R86+sWsRVS/JUKRkVZ1qh83lc9
8ywiTDUqJBEUApwTaVDDqWr6bbYYHC9TdZ/MqJ85hnF2PnwjBS1Vuv+WQuQe/8ru
7LuTzWyqce8u/cYi/0Zs0Vrtmsz5pjhh7Xg1iWXtamJ43v+yqDP/OwZ5BdSkT+P4
J7WWAojVz4iVG4ftNSdJ1CqGuaFP4iMg+HUoS4ecEsyhe6CMdDoq+I2Fuf1aZweS
6clSe/X2HCi7Gspv9oELsNVEci6AfFR/0Ut6LgvSya8AjxZgdu3cmbdDtbPSQ+o=
=dMJE
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "The i.MX fixes for 4.1, 3rd round" from Shawn Guo:
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
* tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=U0hO
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung fix for v4.1" from Kukjin Kim:
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: set display clock correctly for exynos4412-trats2
With unified modeset and flip paths introduced recently when switching
to fbcon PSR was being disabled on fb_set_par path but re-enabled on
fb_pan_display one, causing missed screen updates and un unusable
console.
Regression introduced with:
commit bb54662350
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:13 2015 +0300
drm/i915: Unify modeset and flip paths of intel_crtc_set_config()
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Without this frontbuffer flip when enabling planes PSR got compromised
and wasn't being enabled waiting forever on the flush that never
arrived.
Another solution would to create a enable_cursor function and split this
frontbuffer flip among the different plane enable and disable functions.
But if necessary this can be done in a follow up work. For now let's
just fix the regression.
It was removed by:
commit 87d4300a7d
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Tue Apr 21 17:12:54 2015 +0300
drm/i915: Move intel_(pre_disable/post_enable)_primary to intel_display.c, and use it there.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hotplug status is cached in hp_control, and will be passed on to
bottom halves through intel_hpd_irq_handler(), so we can clear the
sticky bits earlier.
While at it, drop the redundant logging of the hotplug status, which
will also be logged by pch_get_hpd_pins().
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split intel_hpd_irq_handler into platforms specific and platform
agnostic parts. The platform specific parts decode the registers into
information about which hpd pins triggered, and if they were long
pulses. The platform agnostic parts do further processing, such as
interrupt storm mitigation and scheduling bottom halves.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As the hpd loops have been merged together, we don't have to maintain
state for all hpd triggers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing in the two consecutive loops over hpd pins depends on state in a
larger context than the single hpd pin. If we skip the rest of the loop
on short hpd pulses, we can merge the two loops into one.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In an unfortunate back and forth stepping, retract the earlier change to
reduce indent. This is to make merging the two loops easier. No
functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Multiple positive and negative checks for hpd[i] & hotplug_trigger gets
hard to read. Simplify. This should make follow-up patches merging the
two loops easier. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Print a warning if we fall through the .get_display_clock_speed() function
pointer setup. We end up assuming a 133MHz cdclk which should mean that
at least we avoid any 0 deivisions and whatnot. But this could at least
help remind people that they have to provide this function for new platforms.
v2: Rebased to the latest
v3: Rebased to the latest
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Implement cdclk extraction for g33, 965gm and g4x platforms. The details
came from configdb. Sadly there isn't anything there for other gen3/gen4
chipsets.
So far I've tested this on one ELK where it gave me a HPLL VCO of 5333
MHz and cdclk of 444 MHz which seems perfectly sane for this machine.
v2: Rebased to the latest
v3: Rebased to the latest
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It seems 852GM/GMV uses a different HPLLCC encoding than the other
85x platforms. For 852GM/GMV cdclk is always 133MHz. Try to detect that
using the PCI revision (sinc the device ID seems useless for that). I'm
not at all sure this is a good idea, but according to the specs it
should work.
v2: Rebased to the latest
v3: Rebased to the latest
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Actually read the HPLLCC register insted of assuming it's 0. Fix the
HPLLCC bit definitions and all the missing ones from the 852GME spec.
852GME, 854 and 855 all seem to match the same HPLLC encoding even
though only some of the values are valid is some of the platforms.
v2: Rebased to the latest
v3: Rebased to the latest
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Printing it for PPGTT VMAs only adds noise since we have defined
view types are only applicable for GGTT.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The orignal code started by storing the actual central frequency (in Hz,
using a uint64_t) in a uint32_t which codes for the register value. That
can't be right.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Those functions were the only one in existence when they were
introduced. We now know they are only valid for HSW/BDW.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
abs_diff() properly protects its parameters, so no need for the outer ()
here.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
div_u64() can be either a inline function or a define, but in either
case it's safe to provide expressions as parameters without outer ()
around them.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This part doesn't depend on how we compute the DPLL dividers (p and
p0/p1/p2) and can be reused even if we change the algorithm to do so.
(something that is planned for a followup patch)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can coalesce the WARN() condition with the WARN() itself and, as we
are returning early, we can de-intent the rest of the function.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
At the moment, even if we fail to find a suitable divider, we'll still
try to set the mode with bogus parameters.
Just fail the modeset if we can't generate the frequency.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Andy Grover