Use devm_register_sys_off_handler() that replaces global
pm_power_off_prepare variable and allows to register multiple
power-off handlers.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516074433.32433-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_node_get() returns a node with refcount incremented.
Calling of_node_put() to drop the reference when not needed anymore.
Fixes: 3784b6d64d ("regulator: pfuze100: add pfuze100 regulator driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511113506.45185-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following changes have been made:
- S5, L4, L18, L20 and L21 were removed (S5 is managed by
SPMI, whereas the rest seems not to exist [or at least it's blocked
by Sony Loire /MSM8956/ RPM firmware])
- Supply maps have were adjusted to reflect regulator changes.
Fixes: e44adca5fa ("regulator: qcom_smd: Add PM8950 regulators")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220430163753.609909-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the introduction of regulator->enable_count, a driver that did
an exclusive get on an already-enabled regulator would end up with
enable_count initialized to 0 but rdev->use_count initialized to 1.
With that starting point the regulator is effectively stuck enabled,
because if the driver attempted to disable it it would fail the
enable_count underflow check in _regulator_handle_consumer_disable().
The EXCLUSIVE_GET path in _regulator_get() now initializes
enable_count along with rdev->use_count so that the regulator can be
disabled without underflowing the former.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 5451781dad ("regulator: core: Only count load for enabled consumers")
Link: https://lore.kernel.org/r/20220505043152.12933-1-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
If a regulator provides a get_error_flags() operation, its sysfs
attributes will now include an entry for each defined
REGULATOR_ERROR_* flag.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220504065252.6955-3-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When DVS is enabled via the devicetree properties
"nxp,dvs-run-voltage" and "nxp,dvs-standby-voltage" then
also the bit that enables DVS control via PMIC_STBY_REQ pin
should be set.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-5-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-4-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the I2C Level Translator included in PCA9450 configurable from
devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the
I2C Level Translator will be enabled while in STANDBY or RUN state.
Signed-off-by: Per-Daniel Olsson <perdo@axis.com>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-2-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having one enable-gpios property for all regulators is discouraged and
instead, similarly to regulator core ena_gpiod feature, each GPIO should
be present in each regulator node. Add support for parsing such GPIOs,
keeping backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20220425072455.27356-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
These delays can be relatively large (e.g., hundreds of microseconds to
several milliseconds on RK3399 Gru systems). Per
Documentation/timers/timers-howto.rst, that should usually use a
sleeping delay. Let's use the existing regulator delay helper to handle
both large and small delays appropriately. This avoids burning a bunch
of CPU time and hurting scheduling latencies when hitting regulators a
lot (e.g., during cpufreq).
The sleep vs. delay issue choice has been made differently over time --
early versions of RK3399 Gru PWM-regulator support used usleep_range()
in pwm-regulator.c. More of this got moved into the regulator core,
in commits like:
73e705bf81 regulator: core: Add set_voltage_time op
At the same time, the sleep turned into a delay.
It's OK to sleep in _regulator_do_set_voltage(), as we aren't in an
atomic context. (All our callers grab various mutexes already.)
I avoid using fsleep() because it uses a usleep_range() of [N to N*2],
and usleep_range() very commonly biases to the high end of the range. We
don't want to double the expected delay, especially for long delays.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220420141511.v2.2.If0fc61a894f537b052ca41572aff098cf8e7e673@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/report.c:491
__regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
__devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
__devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.
Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid.
Fixes: f3fbd5566f ("regulator: da9121: Add device variants")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Adam Ward <Adam.Ward.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220421090335.1876149-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220412071030.2532230-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220325184508.45670-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johnson Wang <johnson.wang@mediatek.com>:
This patchset adds support for MediaTek PMIC MT6366.
MT6366 is the primary PMIC for MT8186 and probably other SOCs.
The MT6366 is a regulator found on boards based on MediaTek MT8186 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Link: https://lore.kernel.org/r/20220401080212.27383-2-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without active_discharge_on setting, the SWITCH1 discharge enable control
is always disabled. Fix it.
Fixes: 3b15ccac16 ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While we currently assume that regulators with no control available are
just uncontionally enabled this isn't always as clearly displayed to
users as is desirable, for example the code for disabling unused
regulators will log that it is about to disable them. Clean this up a
bit by setting always_on during constraint evaluation if we have no
available mechanism for controlling the regualtor so things that check
the constraint will do the right thing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220325144637.1543496-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The active_discharge_on setting was missed, so output discharge resistor
is always disabled. Fix it.
Fixes: 0555d41497 ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A couple of fixes for the rt4831 driver which fix features that didn't
work due to incomplete description of the register configuration.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmJERWsACgkQJNaLcl1U
h9BF7gf7B+lGxEx+vU/b8RjfH+hxH6kb3/ySQRsYSD3ufcmBcKa0rITU2eA5A0VO
Sc+u3Ep+4mQiT/khyqhcS0AVkO9VSfGv0DBgWxYLQfjmOCau9OG2QqJ83+4HiAsl
UXMfwZE/HDja312uaUSx2G8TYrRFwzmLSJamO/IjV1TM2YGQtbrPpNmcT/WRDXn5
AsUlB+zQGzJGXa1LlqnVzuiEKDTSkt+1Jmu1d7VndBGFnGRdoGRTBx9AhIcEmH9R
PYE7zr1zBTH1qydB+vyduPJ721TOpdOwxAhbC+pzZ23U+P8tPnjFI4frzrxZVB4p
0CoWkWgmgd7PXueXdJYsRkT8CyfKrA==
=RaCU
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for the rt4831 driver which fix features that didn't
work due to incomplete description of the register configuration"
* tag 'regulator-fix-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rt4831: Add active_discharge_on to fix discharge API
regulator: rt4831: Add bypass mask to fix set_bypass API work
- Add support for Maxim MAX77714 PMIC
- Remove Drivers
- Remove support for ST-Ericsson AB8500 DebugFS
- New Device Support
- Add support for Silergy SY7636A to Simple MFD I2C
- Add support for MediaTek MT6366 PMIC to MT6358 IRQ
- Add support for Charger to Intel PMIC CRC
- Add support for Raptor Lake to Intel LPSS PCI
- New Functionality
- Add support for Reboot to Rockchip RK808
- Fix-ups
- Device Tree changes (inc. YAML conversion); silergy,sy7636a, maxim,max77843,
google,cros-ec, maxim,max14577, maxim,max77802,
maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
stericsson,ab8500, stericsson,db8500-prcmu,
samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
- Visible to menuconfig; simple-mfd-i2c
- Clean-up or clarify code; max77686, intel_soc_pmic_crc
- Improve error handling; mc13xxx-core, stmfx, asic3
- Pass device information to child devices; iqs62x, intel-lpss-acpi
- Individually identify IRQ domains; intel_soc_pmic_core
- Remove superfluous code; dbx500-prcmu, exynos-lpass
- Staticify and constify; arizona-i2c
- Mark sometimes used data as __maybe_unused; atmel-flexcom
- Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
- Use provided (platform) APIs; ab8500-core
- Trivial (whitespace, spelling); rohm-bd9576
-----BEGIN PGP SIGNATURE-----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=1xnI
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Maxim MAX77714 PMIC
Removed Drivers:
- Remove support for ST-Ericsson AB8500 DebugFS
New Device Support:
- Add support for Silergy SY7636A to Simple MFD I2C
- Add support for MediaTek MT6366 PMIC to MT6358 IRQ
- Add support for Charger to Intel PMIC CRC
- Add support for Raptor Lake to Intel LPSS PCI
New Functionality:
- Add support for Reboot to Rockchip RK808
Fix-ups:
- Device Tree changes (includcing YAML conversion) for
silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577,
maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
stericsson,ab8500, stericsson,db8500-prcmu,
samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
- Visible to menuconfig; simple-mfd-i2c
- Clean-up or clarify code; max77686, intel_soc_pmic_crc
- Improve error handling; mc13xxx-core, stmfx, asic3
- Pass device information to child devices; iqs62x, intel-lpss-acpi
- Individually identify IRQ domains; intel_soc_pmic_core
- Remove superfluous code; dbx500-prcmu, exynos-lpass
- Staticify and constify; arizona-i2c
- Mark sometimes used data as __maybe_unused; atmel-flexcom
- Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
- Use provided (platform) APIs; ab8500-core
- Trivial (whitespace, spelling); rohm-bd9576"
* tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible
mfd: bd9576: fix typos in comments
mfd: Use platform_get_irq() to get the interrupt
mfd: db8500-prcmu: Remove unused inline function
mfd: arizona-spi: Add Android board ACPI table handling
mfd: arizona-spi: Split Windows ACPI init code into its own function
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
mfd: intel-lpss: Provide an SSP type to the driver
dt-bindings: mfd: brcm,cru: Rename pinctrl node
dt-bindings: Add compatibles for undocumented trivial syscons
mfd: atmel-flexcom: Fix compilation warning
dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC
dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
mfd: exynos-lpass: Drop unneeded syscon.h include
mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs
mfd: ab8500: Drop debugfs module
mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC
mfd: ab8500: Rewrite bindings in YAML
mfd: qcom-spmi-pmic: Add pm8953 compatible
...
Quite a quiet release for the regulator API, mainly a few new drivers
plus a lot of fixes for the Raspberry Pi panel driver. There's also a
SPI commit in here which I managed to apply to the wrong tree and then
didn't notice until there were too many commits on top of it, sorry
about that.
- Make it easier to use the virtual consumer test driver with DT
systems.
- Substantial overhaul providing various fixes and robustness
improvements for the Raspberry Pi panel driver.
- Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas
Instruments TPS62864x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4bYcACgkQJNaLcl1U
h9B0sQf+NvpOeni3N2z1vRS+b2k7r/qX0GU2X2Bs3FnulYRsLqGp9eg4dZvNCc1Z
XhVVqSWZUvI9TEpG5RRuGmTkb/3cwYzURkL1P4EXMrSNCmImRgZ9aTfF7Dc3wNg8
UcomWtsVEHMGNmfvU7Kazk4fVGtb+I1/lYf1i/jjB21108Qzk59CDdhEjQl0DMuZ
3ZNu7YC5MQN6QbjmEMdn3mSNilVyn67WBsCVePi4ebSK/GFZXUtxOtRWAQYTtej8
t0XOd5Z5iGpszohmKi78CdZvA4NtugPoavLbvpd1pRA/9A0PgMZq5vkmJdwW5Nwe
oMMMvJP1yBVLknl0pl7gTibdizoHzQ==
=U2e/
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a quiet release for the regulator API, mainly a few new drivers
plus a lot of fixes for the Raspberry Pi panel driver.
There's also a SPI commit in here which I managed to apply to the
wrong tree and then didn't notice until there were too many commits on
top of it, sorry about that.
- Make it easier to use the virtual consumer test driver with DT
systems.
- Substantial overhaul providing various fixes and robustness
improvements for the Raspberry Pi panel driver.
- Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas
Instruments TPS62864x"
* tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: qcom-rpmh: Add support for SDX65
regulator: dt-bindings: Add PMX65 compatibles
regulator: vctrl: Use min() instead of doing it manually
regulator: rt5190a: Add support for Richtek RT5190A PMIC
regulator: Add bindings for Richtek RT5190A PMIC
regulator: Convert TPS62360 binding to json-schema
regulator: cleanup comments
regulator: virtual: add devicetree support
regulator: virtual: warn against production use
regulator: virtual: use dev_err_probe()
regulator: tps62864: Fix bindings for SW property
regulator: Add support for TPS6286x
regulator: Add bindings for TPS62864x
regulator/rpi-panel-attiny: Use two transactions for I2C read
regulator/rpi-panel-attiny: Use the regmap cache
regulator: rpi-panel: Remove get_brightness hook
regulator: rpi-panel: Add GPIO control for panel and touch resets
regulator: rpi-panel: Convert to drive lines directly
regulator: rpi-panel: Ensure the backlight is off during probe.
regulator: rpi-panel: Serialise operations.
...
For spdx
Remove leading space, add space after //
Replacements
overriden to overridden
Calulate to Calculate
addional to additional
regulatior to regulator
devive to device
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220305162438.689442-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The reg-virt-consumer is very useful for development and testing of
regulator drivers since it allows voltages and modes to be set from
userspace. However, it currently requires platform data so it cannot be
used without patching the kernel. Add support for probing it from the
devicetree to remedy this.
Since this driver is only meant for testing and is a purely software
construct, no binding documentation is added.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220301111831.3742383-4-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is only meant for debugging and testing. Currently, it's
not possible to use it without patching the kernel since it requires
platform data, but we'll be adding devicetree support, so add a loud
warning to make it clear that it's still only meant for debugging and
testing.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220301111831.3742383-3-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TI's TPS62864/TPS6286/TPS62868/TPS62869 are high-frequency synchronous
step-down converters controlled via I2C. There are differences in the
electrical characteristics and packaging between the variants, but the
register interfaces are identical.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220204155241.576342-3-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The check done by regulator_late_cleanup() to detect whether a regulator
is on was inconsistent with the check done by _regulator_is_enabled().
While _regulator_is_enabled() takes the enable GPIO into account,
regulator_late_cleanup() was not doing that.
This resulted in a false positive, e.g. when a GPIO-controlled fixed
regulator was used, which was not enabled at boot time, e.g.
reg_disp_1v2: reg_disp_1v2 {
compatible = "regulator-fixed";
regulator-name = "display_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&tlmm 148 0>;
enable-active-high;
};
Such regulator doesn't have an is_enabled() operation. Nevertheless
it's state can be determined based on the enable GPIO. The check in
regulator_late_cleanup() wrongly assumed that the regulator is on and
tried to disable it.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Link: https://lore.kernel.org/r/20220208084645.8686-1-oliver.barta@aptiv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2C to the Atmel is very fussy, and locks up easily on
Pi0-3 particularly on reads.
If running at 100kHz on Pi3, reading the ID register generally
locks up the Atmel, but splitting the register select write and
read into two transactions is reliable.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-10-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2C to the Atmel is very fussy, and locks up easily on
Pi0-3 particularly on reads.
The LCD power status is controlled solely by this driver, so
rather than reading it back from the Atmel, use the regmap cache
to avoid reading values.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-9-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was implementing a get_brightness function that
tried to read back the PWM setting of the display to report
as the current brightness.
The controller on the display does not support that, therefore
we end up reporting a brightness of 0, and that confuses
systemd's backlight service.
Remove the hook so that the framework returns the current
brightness automatically.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-8-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need independent control of the resets for the panel&bridge,
vs the touch controller.
Expose the reset lines that are on the Atmel's port C via the GPIO
API so that they can be controlled appropriately.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-7-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Atmel was doing a load of automatic sequencing of
control lines, however it was combining the touch controller's
reset with the bridge/panel control.
Change to control the control signals directly rather than
through the automatic POWERON control.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-6-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial state of the Atmel is not defined, so ensure the
backlight PWM is set to 0 by default.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-5-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was using the regmap lock to serialise the
individual accesses, but we really need to protect the
timings of enabling the regulators, including any communication
with the Atmel.
Use a mutex within the driver to control overall accesses to
the Atmel, instead of the regmap lock.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-4-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Atmel is doing some things in the I2C ISR, during which
period it will not respond to further commands. This is
particularly true of the POWERON command.
Increase delays appropriately, and retry should I2C errors be
reported.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-3-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason why 2 Raspberry Pi DSI displays can't be
attached to a Pi Compute Module, so the backlight names need to
be unique.
Use the parent dev_name. It's not as readable, but is unique.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-2-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321.
Semantic patch information:
False positives can be due to function calls within the for_each
loop that may encapsulate an of_node_put.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes: 14e2976fba ("regulator: qcom_smd: Align probe function with rpmh-regulator")
CC: Konrad Dybcio <konrad.dybcio@somainline.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien
Signed-off-by: Mark Brown <broonie@kernel.org>
max20086-regulator.c needs <linux/gpio/consumer.h> for an enum, some
macros, and a function prototype. (seen on ARCH=m68k)
Adding this header file fixes multiple build errors:
../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe':
../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known
217 | enum gpiod_flags flags;
../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
| ^~~~~~~~~~~~~~
../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
262 | chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable]
217 | enum gpiod_flags flags;
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Watson Chow <watson.chow@avnet.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220115033603.24473-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This code accidentally returns PTR_ERR(NULL) which is success. It
should return a negative error code.
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220111072657.GK11243@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a
driver that supports controlling the outputs individually. Additional
features, such as overcurrent detection, may be added later if needed.
Signed-off-by: Watson Chow <watson.chow@avnet.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:
- Probe defer now works correctly, before it used to, well,
kinda just die.. This fixes reliable probing on (at least) PM8994,
because Linux apparently cannot deal with supply map dependencies yet..
- Regulator data is now matched more sanely: regulator data is matched
against each individual regulator node name and throwing an -EINVAL if
data is missing, instead of just assuming everything is fine and
iterating over all subsequent array members.
- status = "disabled" will now work for disabling individual regulators in
DT. Previously it didn't seem to do much if anything at all.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211230023442.1123424-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value from regmap_update_bits() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Link: https://lore.kernel.org/r/20220104104139.601031-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Receiving the Over-Current Protection interrupt while the regulator is
disabled does not count as unhandled/failure (IRQ_NONE, or 0 as it were)
but a "fake event", usually due to inrush as the is regulator about to
be enabled.
Fixes: 390af53e04 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20211224113450.107958-1-marijn.suijten@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in
the kernel the Regulators and Clocks are controlled by an OpRegion
driver designed to work with power control methods defined in ACPI, but
some platforms lack those methods, meaning drivers need to be able to
consume the resources of these chips through the usual frameworks.
This commit adds a driver for the regulators provided by the tps68470,
and is designed to bind to the platform_device registered by the
intel_skl_int3472 module.
This is based on this out of tree driver written by Intel:
https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c
with various cleanups added.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value from twlreg_write() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211213021655.435423-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the rpmh regulators found in PM8450 PMIC
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211201072515.3968843-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8226 PMIC is very often seen on
MSM8x26 boards.
Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211123181119.2897-1-dominikkobinski314@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a generic map_event helper for regulators which have a notification
IRQ with single, well defined purpose. Eg, IRQ always indicates exactly one
event for exactly one regulator device. For such IRQs the mapping is
trivial.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/603b7ed1938013a00371c1e7ccc63dfb16982b87.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an i2c remove callback fails, the i2c core emits a generic error
message and still removes the device. Apart from the message there the
return value isn't further used.
So don't return an error code after having already emitted a driver
specific warning about the problem to prevent two messages about the
same issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211116110951.1213566-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
- Remove support for TI TPS80031/TPS80032 PMICs
- New Device Support
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
- New Functionality
- Add support for Power Off to Rockchip RK817
- Fix-ups
- Simplify Regmap passing to child devices; hi6421-spmi-pmic
- SPDX licensing updates; ti_am335x_tscadc
- Improve error handling; ti_am335x_tscadc
- Expedite clock search; ti_am335x_tscadc
- Generic simplifications; ti_am335x_tscadc
- Use generic macros/defines; ti_am335x_tscadc
- Remove unused code; ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD; wcd934x
- Add namespacing; ti_am335x_tscadc
- Restrict compilation to relevant arches; intel_pmt
- Provide better description/documentation; exynos_lpass
- Add SPI device ID table; altera-a10sr, motorola-cpcap, sprd-sc27xx-spi
- Change IRQ handling; qcom-pm8xxx
- Split out I2C and SPI code; arizona
- Explicitly include used headers; altera-a10sr
- Convert sysfs show() function to; sysfs_emit
- Standardise *_exit() and *_remove() return values; mc13xxx, stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups; ti_am335x_tscadc, qcom-spmi-pmic,
max77686-private
- Device Tree fix-ups; ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01,
samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr,
xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152,
x-powers,axp209-gpio, syscon, qcom,spmi-pmic
- Bug Fixes
- Balance refcounting (get/put); ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type; sec-irq, max77693, max14577
- Repair off-by-one; altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmGJTIAACgkQUa+KL4f8
d2FYsRAAhcTUP7PH5gWko1mQnCzh6h3Q7iQ1MHEokZgIvqc/U2Zmxu57cF9f3jOt
goZdVsU7x6qiMD4SfmInyEp32Emo1pbUTVz6kB3o0G+YACPHOU17xyKuh0FnzQkm
yu/EbEDYNPbNWx9BTA9wgjSOTzCrKMBSd/p9zPzq9M69ihAf2uE9sn5Hbmso1Pdu
tSJ7XYqWVwYzZh8OVzQd6lEIDkA+o+/gR4nCgxqAvGiXQq6yVVOCpnNzj4GrAcep
hkuQVkg14+rmXRbLiZsmc1V+yT13bueKu2fD96gMFpXI8NkR1KZ6QRInI6FtJcl/
m2LGPUuICpd2IiKRa1XtXFZWcMbZ2JVjJSWArgfHj7YBs9+0KcRsbpfHHirpcf14
9LFy4TzjX2A1K0vvKhHSTAhh13HFcvWyd0GCrEhLRmapeiLDXohkUHGMVFVedXzE
tQLCEByjcL+/OCJiQ4Jwk1aaU2cAVEXtvYuciXcBOtHkfaQR/bOYwjRm4Z3AdZyU
zLYMkw/LWvzAaV3Rh1zP6W47WLFHbeMgTmApFOSxAbRsmun0loasVzXWrkvxZlYF
p39l4UcSOIK08PzxqF9ZEM/LtUglShbZbg2wf0VSHzomA+oIsxT7fN16vPHLYDYL
tsQ5fYVN0a3j4ltKFeQl7l2HV/ZzUI/Q6iGmMia5sFbwRN8tlZM=
=SJ7N
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Removed Drivers:
- Remove support for TI TPS80031/TPS80032 PMICs
New Device Support:
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
New Functionality:
- Add support for Power Off to Rockchip RK817
Fix-ups:
- Simplify Regmap passing to child devices in hi6421-spmi-pmic
- SPDX licensing updates in ti_am335x_tscadc
- Improve error handling in ti_am335x_tscadc
- Expedite clock search in ti_am335x_tscadc
- Generic simplifications in ti_am335x_tscadc
- Use generic macros/defines in ti_am335x_tscadc
- Remove unused code in ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD in wcd934x
- Add namespacing in ti_am335x_tscadc
- Restrict compilation to relevant arches in intel_pmt
- Provide better description/documentation in exynos_lpass
- Add SPI device ID table in altera-a10sr, motorola-cpcap,
sprd-sc27xx-spi
- Change IRQ handling in qcom-pm8xxx
- Split out I2C and SPI code in arizona
- Explicitly include used headers in altera-a10sr
- Convert sysfs show() function to in sysfs_emit
- Standardise *_exit() and *_remove() return values in mc13xxx,
stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
qcom-spmi-pmic, max77686-private
- Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic
Bug Fixes:
- Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type in sec-irq, max77693, max14577
- Repair off-by-one in altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"
* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
mfd: tps80031: Remove driver
mfd: max77686: Correct tab-based alignment of register addresses
mfd: wcd934x: Replace legacy gpio interface for gpiod
dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
mfd: dln2: Add cell for initializing DLN2 ADC
mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
mfd: qcom-spmi-pmic: Sort compatibles in the driver
mfd: qcom-spmi-pmic: Sort the compatibles in the binding
mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
mfd: altera-a10sr: Include linux/module.h
mfd: tps65912: Make tps65912_device_exit() return void
mfd: stmpe: Make stmpe_remove() return void
mfd: mc13xxx: Make mc13xxx_common_exit() return void
dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
mfd: arizona: Split of_match table into I2C and SPI versions
...
Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat. Otherwise
it's been quite a quiet release, lots of fixes and small improvements
with the biggest individual changes being several conversions of DT
bindings to YAML format.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF//M0ACgkQJNaLcl1U
h9ByVQf/QapSey1s8ifh7Or3oiG7Ak6BdPYxiPIzhZIqjz4gXV8ySn8EedbH7moW
NcKpqokZ4qPD32fcET2WFQLb9tA8BNEQS1VwRKG+uhzPi3xBnIVj0gt8lNOAW57g
cUWeJhIbafaym33zB0xdDAukLHqjnx24C33Fz8QWaaQv/xRhaCrbzhala4WfXXyP
ucyOqSNnHZ+KX0tQsIG05b9jqca+VrNAyefY5jum2l2r2LFfGjQDv6g0HJEKfcF3
PSu+1RBFsYA3sPvzqzdtcuEs7hqalXVNGBfogCzNQ1HhK9z48R4J9lHtswDDk4EA
9aLYiid02UYRpRpT34z2TexpufW9kQ==
=5lYk
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat.
Otherwise it's been quite a quiet release, lots of fixes and small
improvements with the biggest individual changes being several
conversions of DT bindings to YAML format"
* tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: Don't error out fixed regulator in regulator_sync_voltage()
regulator: tps80031: Remove driver
regulator: Fix SY7636A breakage
regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
regulator: qcom,rpmh: Add compatible for PM6350
regulator: qcom-rpmh: Add PM6350 regulators
regulator: sy7636a: Remove requirement on sy7636a mfd
regulator: tps62360: replacing legacy gpio interface for gpiod
regulator: lp872x: Remove lp872x_dvs_state
regulator: lp872x: replacing legacy gpio interface for gpiod
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
regulator: dt-bindings: maxim,max8973: convert to dtschema
regulator: dt-bindings: maxim,max8997: convert to dtschema
regulator: dt-bindings: maxim,max8952: convert to dtschema
...
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes. The main use case is emulating Windows' WaitForMultipleObjects
which allows Wine to improve the performance of Windows Games. Also
native Linux games can benefit from this interface as this is a common
wait pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to rework
their eviction code step by step without making lockdep upset until the
final steps of rework are completed. It's also useful for regulator and
TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmF/FTITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoVNZD/9vIm3Bu1Coz8tbNXz58AiCYq9Y/vp5
mzFgSzz+VJTkW5Vh8jo5Uel4rCKZyt+rL276EoaRPzYl8KFtWDbpK3qd3PrXKqTX
At49JO4ttAMJUHIBQ6vblEkykmfEd9YPU1uSWk5roJ+s7Jmr5VWnu0FEWHP00As5
tWOca/TM0ei9kof26V2fl5aecTGII4i4Zsvy+LPsXtI+TnmP0gSBcGAS/5UnZTtJ
vQRWTR3ojoYvh5iTmNqbaURYoQLe2j8yscn1DSW1CABWVmP12eDWs+N7jRP4b5S9
73xOv5P7vpva41wxrK2ir5iNkpsLE97VL2JOHTW8nm7orblfiuxHLTCkTjEdd2pO
h8blI2IBizEB3JYn2BMkOAaZQOSjN8hd6Ye/b2B4AMEGWeXEoEv6eVy/orYKCluQ
XDqGn47Vce/SYmo5vfTB8VMt6nANx8PKvOP3IvjHInYEQBgiT6QrlUw3RRkXBp5s
clQkjYYwjAMVIXowcCrdhoKjMROzi6STShVwHwGL8MaZXqr8Vl6BUO9ckU0pY+4C
F000Hzwxi8lGEQ9k+P+BnYOEzH5osCty8lloKiQ/7ciX6T+CZHGJPGK/iY4YL8P5
C3CJWMsHCqST7DodNFJmdfZt99UfIMmEhshMDduU9AAH0tHCn8vOu0U6WvCtpyBp
BvHj68zteAtlYg==
=RZ4x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
TPS80031 driver was upstreamed back in 2013 and never got a user. I noticed
that driver is abandoned while was about to write a patch to switch it to a
new power-off API (that I'm working on). Driver requires platform data that
nobody provides. Instead of changing the dead code, let's remove it.
Dmitry Osipenko (3):
rtc: tps80031: Remove driver
regulator: tps80031: Remove driver
mfd: tps80031: Remove driver
drivers/mfd/Kconfig | 14 -
drivers/mfd/Makefile | 1 -
drivers/mfd/tps80031.c | 526 -----------------
drivers/regulator/Kconfig | 9 -
drivers/regulator/Makefile | 1 -
drivers/regulator/tps80031-regulator.c | 753 -------------------------
drivers/rtc/Kconfig | 8 -
drivers/rtc/Makefile | 1 -
drivers/rtc/rtc-tps80031.c | 324 -----------
include/linux/mfd/tps80031.h | 637 ---------------------
10 files changed, 2274 deletions(-)
delete mode 100644 drivers/mfd/tps80031.c
delete mode 100644 drivers/regulator/tps80031-regulator.c
delete mode 100644 drivers/rtc/rtc-tps80031.c
delete mode 100644 include/linux/mfd/tps80031.h
--
2.32.0
Fixed regulator can't change voltage and regulator_sync_voltage()
returns -EINVAL in this case. Make regulator_sync_voltage() to succeed
for regulators that are incapable to change voltage.
On NVIDIA Tegra power management driver needs to sync voltage and we have
one device (Trimslice) that uses fixed regulator which is getting synced.
The syncing error isn't treated as fatal, but produces a noisy error
message. This patch silences that error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211021183308.27786-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MFD for SY7636A still isn't merged so we need a dependency even if
it ends up not having a real driver due to the header file.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
This series includes the patches to add basic support for new UniPhier NX1
SoC. NX1 SoC also has the same kinds of controls as the other UniPhier
SoCs.
Kunihiko Hayashi (2):
dt-bindings: regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
.../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 +
drivers/regulator/uniphier-regulator.c | 4 ++++
2 files changed, 5 insertions(+)
--
2.7.4
Add the configuration for pm6350 regulators. The supplies are not known
so leave them out for now.
Additionally leave out configuration of smps3 - smps5 and ldo17 as these
are not configured in the downstream kernel and the type of them is not
known.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211007212444.328034-4-luca@z3ntu.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
After this driver was converted to gpiod, clang started warning:
vers/regulator/lp872x.c:689:57: error: implicit conversion from
enumeration type 'enum lp872x_dvs_state' to different enumeration type
'enum gpiod_flags' [-Werror,-Wenum-conversion]
dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate);
~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~
1 error generated.
lp872x_dvs_state was updated to have values from gpiod_flags but this is
not enough to avoid an implicit conversion warning from either GCC or
clang (although GCC enables this warning under -Wextra instead of -Wall
like clang so it is not seen under normal builds).
Eliminate lp872x_dvs_state in favor of using gpiod_flags everywhere so
that there is no more warning about an implicit conversion.
Fixes: 72bf80cf09 ("regulator: lp872x: replacing legacy gpio interface for gpiod")
Link: https://github.com/ClangBuiltLinux/linux/issues/1481
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019004335.193492-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tagged to allow further bindings to rely on these.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFgkpYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0OPnB/9M7HLzuTV7mkG0buI1vIPDjuSCWsr/
TZ9IuZIy0OmtdcXq9F0VyRq6wy6bVMXVSlrlFQLnrPLFW1/MIqeyPmLJyqwKVYh/
lyrAaHfeKck2S2ususisudBr/Qkg0ZrEX2f1eLC03xBnBEOy3Nl71s/HxbO9n4yt
ZAUk/1/UlmbhQKNlNgMtfXuXtLCGm3GRL30jb4nb/hGj/8Xb0ESmnRmkmZnVi/+H
DgHGHLDeK3Y5ntQx8IwbrPFimlvAGVgfU/ruf7Z6zmpuW2tKKcLE7ZAR8DG5ZRhw
W3WPq6YYUzAhyxgY0U2iO6wrL5rKvo65CbGOvpk9RsCYk2GxQS6BqHWX
=P4cy
-----END PGP SIGNATURE-----
Merge tag 'tags/s2m_s5m_dtschema' into tb-mfd-from-regulator-5.16
regulator/clock: Convert the s2m and s5m DT bindings to schema
Tagged to allow further bindings to rely on these.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Message-Id: <YWma2yTyuwS5XwhY@fedora>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Changes since v2
================
1. Add Stephen's and Rob's tags.
2. Correct inb-supply description in patch 10/10.
Changes since v2
================
1. Add Rob's tags.
2. Remove "regulator-name" from properties (all regulator dtschema).
3. Move "unevaluatedProperties" higher to make code easier to read (all regulator dtschema).
4. Add ref-type to op-mode property (patch 6: s5m8767 regulators).
Changes since v1
================
1. Drop DTS patches - applied.
2. Fully remove bindings/regulator/samsung,s5m8767.txt .
3. Minor subject reformatting and few typos in text.
Intro
=====
This patchset converts all devicetree bindings of Samsung S2M and S5M
PMIC devices from txt to dtschema.
It includes also two fixes because later conversion depends on it
(contextually).
Merging/dependencies
====================
1. Regulator related binding changes depend on first two commits (the
fixes), because of context.
2. The mfd bindings depend on clock and regulator bindings.
The fixes and bindings changes (patches 1-10) should go via the same
tree. For example regulator or mfd tree.
Another alternative is that regulator patches (1-2, 4-6) go via Mark who
later gives MFD a stable branch/tag to pull. Then the clock and MFD
bindings would go on top via MFD tree. Or any other setup you would like
to have.
Overview of devices
===================
Essentially all Samsung S2M and S5M PMICs are very similar devices. They
provide the same functionality: regulators, RTC, 2 or 3 clocks and main
power management (e.g. power cut to SoC).
The differences are mostly in registers layout and number of regulators.
The drivers are built around one common part, mfd/sec-core.c, and share
some drivers between devices:
1. MFD sec-core for all devices,
1. one clock driver for most of devices,
2. one RTC driver for all devices,
3. three regulator drivers.
The regulator drivers were implementing slightly different features,
therefore one regulator binding for all devices does not make much
sense. However the clock device binding can be shared.
The final dtschema bindings try to implement this - share only the clock
bindings.
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS
is disabled
regulator: dt-bindings: samsung,s5m8767: correct
s5m8767,pmic-buck-default-dvs-idx property
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s2mps11: convert to dtschema
dt-bindings: mfd: samsung,s2mpa01: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: convert to dtschema
dt-bindings: mfd: samsung,s5m8767: document buck and LDO supplies
.../bindings/clock/samsung,s2mps11.txt | 49 ---
.../bindings/clock/samsung,s2mps11.yaml | 45 +++
.../bindings/mfd/samsung,s2mpa01.yaml | 91 ++++++
.../bindings/mfd/samsung,s2mps11.yaml | 267 +++++++++++++++
.../bindings/mfd/samsung,s5m8767.yaml | 307 ++++++++++++++++++
.../bindings/mfd/samsung,sec-core.txt | 86 -----
.../bindings/regulator/samsung,s2mpa01.txt | 79 -----
.../bindings/regulator/samsung,s2mpa01.yaml | 62 ++++
.../bindings/regulator/samsung,s2mps11.txt | 102 ------
.../bindings/regulator/samsung,s2mps11.yaml | 44 +++
.../bindings/regulator/samsung,s2mps13.yaml | 44 +++
.../bindings/regulator/samsung,s2mps14.yaml | 44 +++
.../bindings/regulator/samsung,s2mps15.yaml | 44 +++
.../bindings/regulator/samsung,s2mpu02.yaml | 44 +++
.../bindings/regulator/samsung,s5m8767.txt | 145 ---------
.../bindings/regulator/samsung,s5m8767.yaml | 74 +++++
MAINTAINERS | 9 +-
drivers/regulator/s5m8767.c | 21 +-
18 files changed, 1080 insertions(+), 477 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
--
2.30.2
The driver and its bindings, before commit 04f9f068a6 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a6 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a6 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are lots of fields in struct hi6421_spmi_pmic that aren't
used. As a matter of fact, only regmap is needed.
So, drop the struct as a whole, and set regmap as the drvdata.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1828cb783b1ebca0b98bf0b3077d8701adb228f7.1630586862.git.mchehab+huawei@kernel.org
Consistently use the defines for buck control mask values.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YVqpujZLZmaiqwe8@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
PM2250 is commonly used with QCM2290/QCS2290 SoCs, and provides 4 SMPS
and 22 LDO regulators. The LDO regulators are the same types found on
PM660.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210926084549.29880-3-shawn.guo@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We lowered all the other constraint related log messages to debug level so
lower the logging of what supplies we're configuring to debug level too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210929140717.3769-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
debugfs code complained at boot time that
debugfs: Directory 'reg-dummy-regulator-dummy' with parent 'regulator'
already present!
if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. The problem is that we
don't provide .remove() method for dummy_regulator_driver, which should
invoke regulator_unregister() on device teardown to properly free things.
Though it's harmless as dummy_pdev never gets unbound in practice, let's
use devm_regulator_register() to get rid of the inconsistency.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20210925035507.1904-1-yuzenghui@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_pwm_get() can return -EPROBE_DEFER if the pwm regulator is not
ready yet. Use dev_err_probe() for pwm regulator resources
to indicate the deferral reason when waiting for the
resource to come up.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20210925173413.1019-1-linux.amoon@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX8973 is supposed to be MAX8973A. Kconfig and the
initial comment of max8973-regulator.c were modified
accordingly.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Link: https://lore.kernel.org/r/20210920061137.10884-1-ramona.nechita@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i915 will soon gain an eviction path that trylock a whole lot of locks
for eviction, getting dmesg failures like below:
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by i915_selftest/5776:
#0: ffff888101a79240 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x160
#1: ffffc900009778c0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.63+0x39/0x1b0 [i915]
#2: ffff88800cf74de8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.63+0x5f/0x1b0 [i915]
#3: ffff88810c7f9e38 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x1c4/0x9d0 [i915]
#4: ffff88810bad5768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
#5: ffff88810bad60e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
...
#46: ffff88811964d768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
#47: ffff88811964e0e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915]
INFO: lockdep is turned off.
Fixing eviction to nest into ww_class_acquire is a high priority, but
it requires a rework of the entire driver, which can only be done one
step at a time.
As an intermediate solution, add an acquire context to
ww_mutex_trylock, which allows us to do proper nesting annotations on
the trylocks, making the above lockdep splat disappear.
This is also useful in regulator_lock_nested, which may avoid dropping
regulator_nesting_mutex in the uncontended path, so use it there.
TTM may be another user for this, where we could lock a buffer in a
fastpath with list locks held, without dropping all locks we hold.
[peterz: rework actual ww_mutex_trylock() implementations]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YUBGPdDDjKlxAuXJ@hirez.programming.kicks-ass.net
This reverts commit 0da6736ecd.
The MODULE_DEVICE_TABLE already creates proper alias. Having another
MODULE_ALIAS causes the alias to be duplicated:
$ modinfo max14577-regulator.ko
alias: platform:max77836-regulator
alias: platform:max14577-regulator
description: Maxim 14577/77836 regulator driver
alias: platform:max77836-regulator
alias: platform:max14577-regulator
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 0da6736ecd ("regulator: max14577: Add proper module aliases strings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210916144102.120980-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix 'enable' gpio control logic from the below cases if it's specified.
1. All off and both are sequentially controlled to be on.
The 'enable' gpio control block to be called twice including the delay time.
2. Both are on and one is preparing to be off.
The 'enable' gpio control low before register cache is configured to be true.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1631629249-9998-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Voltage-controlled regulators depend on their supply regulator for
retrieving their voltage, and so they might return -EPROBE_DEFER at this
stage. Our caller already attempts to resolve supplies and retry, so we
shouldn't be printing this error to logs.
Quiets log messages like this, on Rockchip RK3399 Gru/Kevin boards:
[ 1.033057] ppvar_bigcpu: failed to get the current voltage: -EPROBE_DEFER
...
[ 1.036735] ppvar_litcpu: failed to get the current voltage: -EPROBE_DEFER
...
[ 1.040366] ppvar_gpu: failed to get the current voltage: -EPROBE_DEFER
...
[ 1.044086] ppvar_centerlogic: failed to get the current voltage: -EPROBE_DEFER
Cc: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210826124015.1.Iab79c6dd374ec48beac44be2fcddd165dd26476b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210908105752.2035-1-caihuoqing@baidu.com
Signed-off-by: Mark Brown <broonie@kernel.org>
COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86).
In this case, the support of COMPILE_TEST is added, so this module could
be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210908105738.1933-1-caihuoqing@baidu.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap/devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210908105745.1984-1-caihuoqing@baidu.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a typo in the pm8009 LDO7 declaration, it uses resource name ldo%s6
instead of ldo%s7.
Fixes: 951384cabc ("regulator: qcom-rpmh-regulator: add pm8009-1 chip revision")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901114350.1106073-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
vctrl_enable() and vctrl_disable() call regulator_enable() and
regulator_disable(), respectively. However, vctrl_* are regulator ops
and should not be calling the locked regulator APIs. Doing so results in
a lockdep warning.
Instead of exporting more internal regulator ops, model the ctrl supply
as an actual supply to vctrl-regulator. At probe time this driver still
needs to use the consumer API to fetch its constraints, but otherwise
lets the regulator core handle the upstream supply for it.
The enable/disable/is_enabled ops are not removed, but now only track
state internally. This preserves the original behavior with the ops
being available, but one could argue that the original behavior was
already incorrect: the internal state would not match the upstream
supply if that supply had another consumer that enabled the supply,
while vctrl-regulator was not enabled.
The lockdep warning is as follows:
WARNING: possible circular locking dependency detected
5.14.0-rc6 #2 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at:
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
but task is already holding lock:
ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (regulator_ww_class_mutex){+.+.}-{3:3}:
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
ww_mutex_lock (kernel/locking/mutex.c:1199)
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
regulator_lock_dependent (drivers/regulator/core.c:343)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
platform_probe (drivers/base/platform.c:1427)
[...]
-> #1 (regulator_ww_class_acquire){+.+.}-{0:0}:
regulator_lock_dependent (include/linux/ww_mutex.h:129
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
[...]
-> #0 (regulator_list_mutex){+.+.}-{3:3}:
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
other info that might help us debug this:
Chain exists of:
regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_ww_class_mutex);
lock(regulator_list_mutex);
*** DEADLOCK ***
6 locks held by swapper/0/1:
#0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock (drivers/base/dd.c:1030)
#1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at:
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2))
#2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at:
subsys_interface_register (drivers/base/bus.c:1033)
#3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at:
cpufreq_online (include/linux/bitmap.h:285
include/linux/cpumask.h:405
drivers/cpufreq/cpufreq.c:1399)
#4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at:
regulator_enable (drivers/regulator/core.c:2808)
#5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa
Hardware name: Google Scarlet (DT)
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:161)
show_stack (arch/arm64/kernel/stacktrace.c:218)
dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2))
dump_stack (lib/dump_stack.c:113)
print_circular_bug (kernel/locking/lockdep.c:?)
check_noncircular (kernel/locking/lockdep.c:?)
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
Reported-by: Brian Norris <briannorris@chromium.org>
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Fixes: e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting
and setting the voltage"), all calls to get/set the voltage of the
control regulator were switched to unlocked versions to avoid deadlocks.
However, the call in the probe path is done without regulator locks
held. In this case the locked version should be used.
Switch back to the locked regulator_get_voltage() in the probe path to
avoid any mishaps.
Fixes: e915331149 ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210825033704.3307263-2-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper to send IRQ notification for regulator errors had still
old description mentioning calling BUG() as a last resort when
error status reading has kept failing for more times than a given
threshold.
The impementation calling BUG() did never end-up in-tree but was
replaced by hopefully more sophisticated handler trying to power-off
the system.
Fix the documentation to reflect actual behaviour.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210823075651.GA3717293@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
From testing on hardware the poll_enable_time isn't required and
sometimes causes the driver probe to fail so let's remove it.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210803084456.198-5-alistair@alistair23.me
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently. Since the register map
is small, we use a FLAT regmap cache.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20210803165211.3b00db29@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently. Since the register map
is small -- there's only one register in sy8824c and sy8824e, there
are only two registers in sy20276 and sy20278, so we use a FLAT regmap
cache.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20210803165043.042ec24d@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
The arrays containing the regulator's voltage ranges are
currently named after the first ldo which uses such range.
However, it sounds a lot clearer if those are named with
the voltage range instead.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1bdff1d1f23753b69c8044160decfad1e8553d08.1627121912.git.mchehab+huawei@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of returning error directly, use dev_err_probe. This avoids
messages in the dmesg log for devices which will be probed again later.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20210721165716.19915-1-macroalpha82@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reg will be reset in below two conditions.
1. 'Enable' pin from H to L.
2. Both PAVDD and NAVDD are all disabled.
And 'Enable' pin also control i2c communication capability.
This patch is to Seperate the if condition in enable/disable callback for
reg cache manipulation.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1626407746-23156-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In addition to the ability of merging some power outputs, this chip has
an overdrive mode.
BCORE1, BCORE2 and BPRO have this ability, in which case the legal
current draw is increased from 2 amps to 2.5 amps (at the expense of
a quiescent current increase), and the configurable current limits
are doubled.
If a current higher than maximum half-current mode is requested, enable
overdrive, and scale the current limit down.
Symmetrically, scale the current limit up when querying a overdrive-enabled
regulator.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/824518e6391b783a12eba9ff0527f06607a34bfb.1626160826.git.plr.vincent@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the const array func_base on the stack but instead it
static. Makes the object code smaller by 55 bytes:
Before:
text data bss dec hex filename
6422 3216 64 9702 25e6 drivers/regulator/rt6245-regulator.o
After:
text data bss dec hex filename
6303 3280 64 9647 25af drivers/regulator/rt6245-regulator.o
Reduction of 55 bytes
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210715141531.27672-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These APIs aren't used anywhere and most-likely exist because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing these discourages any weird logic that could be created with
such an API functions.
Alexandru Ardelean (4):
regulator: devres: remove devm_regulator_unregister_notifier()
function
regulator: devres: remove devm_regulator_unregister() function
regulator: devres: remove
devm_regulator_bulk_unregister_supply_alias()
regulator: devres: unexport devm_regulator_unregister_supply_alias()
drivers/regulator/devres.c | 105 +----------------------------
include/linux/regulator/consumer.h | 23 -------
include/linux/regulator/driver.h | 1 -
3 files changed, 2 insertions(+), 127 deletions(-)
--
2.31.1
The ROHM BD71837/47/50/78 do support enabling/disabling the under/over
voltage protection. Add support for enabling/disabling the protection
according to the device-tree information.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210705105416.GA1189560@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of linear mapping, Use linear range to map all voltage selection.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1625553939-9109-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TPS65910 regulator now gets a deferred probe until supply regulator is
registered. Silence noisy error message about the deferred probe.
Reported-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210705201211.16082-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shift setting can be calculated via the corresponding mask field,
so remove these shift fields.
The usage of da_vsel_mask is different from other mask defines because
current code does shift regval before mask with the da_vsel_mask.
Do proper shit to da_vsel_mask setting so we can calculate the shift.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210629130503.2183574-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere outside of the regulator devres code.
This function is needed for the devm_regulator_bulk_register_supply_alias()
function on the error path, to cleanup any previously registered supply
aliases.
This change makes the devm_regulator_unregister_supply_alias() local to the
regulator core framework, to avoid it being used in any weird logic.
It's also removing the doc-string for
devm_regulator_unregister_supply_alias(), since it doesn't need to be
documented anymore, as no other external consumer should use it.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-5-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere and most-likely exists because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing this also discourages any weird logic that could be created with
such an API function.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-4-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere and most-likely exists because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing this also discourages any weird logic that could be created with
such an API function.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-3-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable
returns the drvdata of the mfd device rather than the regulator. Fix it.
This was broken while converting to use simplified DT parsing because the
config.dev changed from pdev->dev to pdev->dev.parent for parsing the
parent's of_node.
Fixes: 29dc269a85 ("regulator: hi6421: Convert to use simplified DT parsing")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If use dev->parent, the regulator_unregister will not be called when this
driver is unloaded. Fix it by using dev instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210702142140.2678130-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) actually returns the drvdata of the mfd
device rather than the regulator. Fix it.
Fixes: 9bc146acc3 ("regulator: hi6421v600: Fix setting wrong driver_data")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210630074246.2305166-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix wrong mask for strobe-polarity-high.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
In-reply-to: <CAFRkauB=0KwrJW19nJTTagdHhBR=V2R8YFWG3R3oVXt=rBRsqw@mail.gmail.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/1624723112-26653-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The boolean variable may_have_irqs is not ininitialized and is
only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576.
Fix this by ininitialized may_have_irqs to false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: e7bf1fa58c ("regulator: bd9576: Support error reporting")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.
Also fix returning negative value when new_sel < old_sel.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current code set "config.driver_data = sreg" but sreg only init the mutex,
the othere fields are just zero. Fix it by pass *info to config.driver_data
so each regulator can get corresponding data by rdev_get_drvdata().
Separate enable_mutex from struct hi6421_spmi_reg_info since only need one
mutex for the driver.
Fixes: d2dfd50a0b ("staging: hikey9xx: hi6421v600-regulator: move LDO config from DT")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210622043329.392072-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes since v2:
-----------------
- v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21
- Addressed review comments from Bjorn and Mark.
- As per suggestion from Bjorn, seperated the patches in different
patchsets (specific to each subsystem) to ease review and patch application.
Changes since v1:
-----------------
- v1 series can be found here: https://lore.kernel.org/linux-arm-msm/20210607113840.15435-1-bhupesh.sharma@linaro.org/T/#mc524fe82798d4c4fb75dd0333318955e0406ad18
- Addressed review comments from Bjorn and Vinod received on the v1
series.
This series adds the regulator support code for SA8155p-adp board
which is based on Qualcomm snapdragon sa8155p SoC which in turn is
simiar to the sm8150 SoC.
This board supports a new PMIC PMM8155AU.
While at it, also make some cosmetic changes to the regulator driver
and dt-bindings to make sure the compatibles are alphabetical and also
fix issues with extra comma(s) at the end of terminator line(s).
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Bhupesh Sharma (5):
dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles
alphabetically
dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for
SA8155p-adp board pmic
regulator: qcom-rpmh: Cleanup terminator line commas
regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[]
array
regulator: qcom-rpmh: Add new regulator found on SA8155p adp board
.../regulator/qcom,rpmh-regulator.yaml | 17 ++---
drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++----
2 files changed, 59 insertions(+), 20 deletions(-)
--
2.31.1
Extend regulator notification support
This series extends the regulator notification and error flag support.
Initial discussion on the topic can be found here:
https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/
In a nutshell - the series adds:
1. WARNING level events/error flags. (Patch 3)
Current regulator 'ERROR' event notifications for over/under
voltage, over current and over temperature are used to indicate
condition where monitored entity is so badly "off" that it actually
indicates a hardware error which can not be recovered. The most
typical hanling for that is believed to be a (graceful)
system-shutdown. Here we add set of 'WARNING' level flags to allow
sending notifications to consumers before things are 'that badly off'
so that consumer drivers can implement recovery-actions.
2. Device-tree properties for specifying limit values. (Patches 1, 5)
Add limits for above mentioned 'ERROR' and 'WARNING' levels (which
send notifications to consumers) and also for a 'PROTECTION' level
(which will be used to immediately shut-down the regulator(s) W/O
informing consumer drivers. Typically implemented by hardware).
Property parsing is implemented in regulator core which then calls
callback operations for limit setting from the IC drivers. A
warning is emitted if protection is requested by device tree but the
underlying IC does not support configuring requested protection.
3. Helpers which can be registered by IC. (Patch 4)
Target is to avoid implementing IRQ handling and IRQ storm protection
in each IC driver. (Many of the ICs implementin these IRQs do not allow
masking or acking the IRQ but keep the IRQ asserted for the whole
duration of problem keeping the processor in IRQ handling loop).
4. Emergency poweroff function (refactored out of the thermal_core to
kernel/reboot.c) which is called if IC fires error IRQs but IC reading
fails and given retry-count is exceeded. (Patches 2, 4)
Please note that the mutex in the emergency shutdown was replaced by a
simple atomic in order to allow call from any context.
The helper was attempted to be done so it could be used to implement
roughly same logic as is used in qcom-labibb regulator. This means
amongst other things a safety shut-down if IC registers are not readable.
Using these shut-down retry counters are optional. The idea is that the
helper could be also used by simpler ICs which do not provide status
register(s) which can be used to check if error is still active.
ICs which do not have such status register can simply omit the 'renable'
callback (and retry-counts etc) - and helper assumes the situation is Ok
and re-enables IRQ after given time period. If problem persists the
handler is ran again and another notification is sent - but at least the
delay allows processor to avoid IRQ loop.
Patch 7 takes this notification support in use at BD9576MUF.
Patch 8 is related to MFD change which is not really related to the RFC
here. It was added to this series in order to avoid potential conflicts.
Patch 9 adds a maintainers entry.
Changelog v10-RESEND:
- rebased on v5.13-rc4
Changelog v10:
- rebased on v5.13-rc2
- Move rdev_*() print macros to the internal.h and use rdev_dbg()
from irq_helpers.c
- Export rdev_get_name() and move it from coupler.h to driver.h for
others to use. (It was already in coupler.h but not exported -
usage was limited and coupler.h does not sound like optimal place
as rdev_name is not only used by coupled regulators)
- Send all regulator notifications from irq_helpers.c at one OR'd
event for the sake of simplicity. For BD9576 this does not matter
as it has own IRQ for each event case. Header defining events says
they may be OR'd.
- Change WARN() at protection shutdown to pr_emerg as suggested by
Petr.
Changelog v9:
- rebases on v5.13-rc1
- Update thermal documentation
- Fix regulator notification event number
Changelog v8:
- split shutdown API adding and thermal core taking it in use to
own patches.
- replace the spinlock with atomic when ensuring the emergency
shutdown is only called once.
Changelog v7:
general:
- rebased on v5.12-rc7
- new patch for refactoring the hw-failure reboot logic out of
thermal_core.c for others to use.
notification helpers:
- fix regulator error_flags query
- grammar/typos
- do not BUG() but attempt to shut-down the system
- use BITS_PER_TYPE()
Changelog v6:
Add MAINTAINERS entry
Changes to IRQ notifiers
- move devm functions to drivers/regulator/devres.c
- drop irq validity check
- use devm_add_action_or_reset()
- fix styling issues
- fix kerneldocs
Changelog v5:
- Fix the badly formatted pr_emerg() call.
Changelog v4:
- rebased on v5.12-rc6
- dropped RFC
- fix external FET DT-binding.
- improve prints for cases when expecting HW failure.
- styling and typos
Changelog v3:
Regulator core:
- Fix dangling pointer access at regulator_irq_helper()
stpmic1_regulator:
- fix function prototype (compile error)
bd9576-regulator:
- Update over current limits to what was given in new data-sheet
(REV00K)
- Allow over-current monitoring without external FET. Set limits to
values given in data-sheet (REV00K).
Changelog v2:
Generic:
- rebase on v5.12-rc2 + BD9576 series
- Split devm variant of delayed wq to own series
Regulator framework:
- Provide non devm variant of IRQ notification helpers
- shorten dt-property names as suggested by Rob
- unconditionally call map_event in IRQ handling and require it to be
populated
BD9576 regulators:
- change the FET resistance property to micro-ohms
- fix voltage computation in OC limit setting
BD9573 and BD9576 support set of "protection" interrupts for "fatal"
issues. Those lead to SOC reset as PMIC shuts the power outputs. Thus
there is no relevant IRQ handling for them.
Few "detection" interrupts were added to the BD9576 with the idea that
SOC could take some recovery-action before error gets unrecoverable.
Add support for over and under voltage detection for Vout1 ... Vout4
and VoutL1. Add over-current detection for VoutS1 and finally a
thermal warning (common for all regulators) which alerts 30 C
before temperature reaches the thermal shutdown point. This way
consumer drivers can build error-recovery mechanisms.
Unfortunately the BD9576 interrupt logic was not re-evaluated. IRQs
are not designed to be properly acknowleged - and IRQ line is kept
active for whole duration of error condition (in comparison to
informing only about state change).
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/05c4f7a8e30ef1d4d5f3ceab07da4ebe68f5b4ed.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide helper function for IC's implementing regulator notifications
when an IRQ fires. The helper also works for IRQs which can not be acked.
Helper can be set to disable the IRQ at handler and then re-enabling it
on delayed work later. The helper also adds regulator_get_error_flags()
errors in cache for the duration of IRQ disabling.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rdev print helpers are a nice way to print messages related to a
specific regulator device. Move them from core.c to internal.h
As the rdev print helpers use rdev_get_name() export it from core.c. Also
move the declaration from coupler.h to driver.h because the rdev name is
not just a coupled regulator property. I guess the main audience for
rdev_get_name() will be the regulator core and drivers.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit db27f8294c changed eco_mode << (ffs(sreg->eco_mode_mask) - 1)
to sreg->eco_mode_mask << (ffs(sreg->eco_mode_mask) - 1) which is wrong.
Fix it by simply set val = sreg->eco_mode_mask.
In additional, sreg->eco_mode_mask can be 0 (LDO3, LDO33, LDO34).
Return -EINVAL if idle mode is not supported when sreg->eco_mode_mask is 0.
While at it, also use unsigned int for reg_val/val which is the expected
type for regmap_read and regmap_update_bits.
Fixes: db27f8294c ("staging: regulator: hi6421v600-regulator: use shorter names for OF properties")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619123423.4091429-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SA8155p-adp board supports a new regulator - pmm8155au.
The output power management circuits in this regulator include:
- FTS510 smps,
- HFS510 smps, and
- LDO510 linear regulators
Add support for the same.
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-6-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing terminator(s) at the end of pm7325x_vreg_data[]
array instances.
Fixes: c4e5aa3dbe ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-5-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup the qcom-rpmh regulator driver to remove comma(s)
at the end of the terminator line(s).
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210617051712.345372-4-bhupesh.sharma@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current code sets config.driver_data to a zero initialized regulator
which is obviously wrong. Fix it.
Fixes: 4618119b9b ("regulator: hi655x: enable regulator for hi655x PMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210620132715.60215-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of returning the the PTR_ERR directly, use dev_err_probe which
will also correctly set the deferred probe reason in
/sys/kernel/debug/deferred_devices, making it easier to debug missing
devices on the system.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20210616125331.153414-1-r.czerwinski@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
At the context with *rdev, use rdev_get_drvdata() is more intuitive.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's only used in this file and never changed, make it static const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vsel active level is for the normal voltage, the opposite level is
the suspend voltage.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210616011816.3479406-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the voltage tables have entries in ascendant order, so use
regulator_map_voltage_ascend to speed up the mapping.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210610134128.2477821-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds regulator_sync_voltage_rdev(), which is used as a dependency
for new Tegra power domain code.
-----BEGIN PGP SIGNATURE-----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=/dXp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDHMi0ACgkQJNaLcl1U
h9Dbvgf/dAcS9d9lgjijzGYcvsh3hBpWqimMrO/dfXlalqXfdU0VN82++0WIcpC7
uoQ2I6RwU4NNTvMUjbmyQsYONMBNthxYEgGDdtwOE03TLVJHc9KyKCzRLFp0E0sX
wHvoAbSZbzd1OIC+96iWJzeC9rq24LX5IaP8301hWKFhbZpo3/uP9yTgQuxSp0cf
tuQDu8vzW7TuC7pxy06FgCmVhsEd2OXEO+wu9OWzMoIAh2Z82KlEb8j0cpV0G0d1
jPdDanaFwJ3LZevbMXZQnJyCGRhFU74vboSC3Vb8e2H7eCwb68s3Z5mo1Dxq6M3o
qE9JGQRgVVOHr67vYXfirOzmhz2D5g==
=5rP3
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-regulator' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into regulator-5.14
regulator: Changes for v5.14-rc1
This adds regulator_sync_voltage_rdev(), which is used as a dependency
for new Tegra power domain code.
A collection of fixes for the regulator API that have come up since the
merge window, including a big batch of fixes from Axel Lin's usual
careful and detailed review. The one stand out fix here is Dmitry
Baryshkov's fix for an issue where we fail to power on the parents of
always on regulators during system startup if they weren't already
powered on.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmC/ao0ACgkQJNaLcl1U
h9AoqQf9GYtljFSON07MAOWwMgnjuMQ+rl0ZadqKKzq74QMMi4bxVKDWkftQ28/5
Ulk2M/mxRE6C1OEpOJl9ZnG9K0fWpOdnTURkYgW0FsJniEDiF7ZkdoFypwu93jOD
0r+3QCw/Ti9i08pOdlpFpUKU5rp/O9HYmouOTzBOCiM1SMb9TkkX5GBoDVw8+cWd
2PZqKQXEsaK1uNzeaXYw6UO8+IdSpVQRzSEILdtVWyHCNmXDDJWfI3vYeeqDbhYr
C+E3UdrO1ftNsOoJv33NqhscMnulkZDZ6H6lgbLX2FyFAe2M9N+AildGlkR5H1GD
xH3q3EvkOE2Y2X3zHteLdJ3MoI91cQ==
=poWJ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A collection of fixes for the regulator API that have come up since
the merge window, including a big batch of fixes from Axel Lin's usual
careful and detailed review.
The one stand out fix here is Dmitry Baryshkov's fix for an issue
where we fail to power on the parents of always on regulators during
system startup if they weren't already powered on"
* tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL
regulator: hi6421v600: Fix .vsel_mask setting
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837
regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges
regulator: rtmv20: Fix to make regcache value first reading back from HW
regulator: mt6315: Fix function prototype for mt6315_map_mode
regulator: rtmv20: Add Richtek to Kconfig text
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
regulator: hisilicon: use the correct HiSilicon copyright
regulator: bd71828: Fix .n_voltages settings
regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting
regulator: max77620: Silence deferred probe error
regulator: max77620: Use device_set_of_node_from_dev()
regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting
regulator: core: resolve supply for boot-on/always-on regulators
regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails
regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap
regulator: fan53880: Fix missing n_voltages setting
regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode
regulator: fan53555: fix TCS4525 voltage calulation
...
According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.
So vsel_mask for FAN53880_BUCK should be 0xFF.
Fixes: e6dea51e2d ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.
Thus the struct bd71815_pmic can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210607143002.1600017-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regulator_set_ramp_delay_regmap instead of open-coded
LTC3589_LINEAR_REG() no longer call LTC3589_REG() now.
Only LTC3589_LINEAR_REG() needs to set go_bit, thus remove go_bit
parameter from LTC3589_REG() macro.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210604115803.1260976-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6359_BUCK and MT6359_LDO_LINEAR macros setup both
linear settings (min_uV, uV_step, linear_min_sel) and linar_range
(linear_ranges, n_linear_ranges) settings.
All the linear range tables actually only has one entry.
Let's simplify it by using linear instead of linear range.
The linear_min_sel setting is 0 for all cases, remove it
from the macros.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210606065052.1417111-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For rk3399pro boards the tcs4526 regulator supports the vdd_gpu
regulator. The tcs4526 regulator has a chip id of <0>.
Add the compatibile tcs,tcs4526
without this patch, the dmesg output is:
fan53555-regulator 0-0010: Chip ID 0 not supported!
fan53555-regulator 0-0010: Failed to setup device!
fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
vdd_gpu: supplied by vcc5v0_sys
The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526
This has been tested with a Radxa Rock Pi N10.
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://lore.kernel.org/r/20210602112943.GA119@5f9be87369f8
Signed-off-by: Mark Brown <broonie@kernel.org>
Richtek RT6245 is a high-performance, synchronous step-down converter
that can deliver up to 14A output current with an input supply voltage
range of 4.5V to 17V.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622699844-19203-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The di->slew_reg/di->slew_mask/di->slew_shift was not set in current code,
fix it.
Fixes: f2a9eb975a ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210525124017.2550029-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max77802_set_ramp_delay_2bit() returns -EINVAL when id > MAX77802_BUCK4.
This was a leftover in commit b0615f1da5
("regulator: max77802: Split regulator operations for BUCKs").
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210523072320.2174443-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Robert Marko