Evaluating cc-name invokes the compiler every time even when you are
not compiling anything, like 'make help'. This is not efficient.
The compiler type has been already detected in the Kconfig stage.
Use CONFIG_CC_IS_CLANG, instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Paul Burton <paul.burton@mips.com> (MIPS)
Acked-by: Joel Stanley <joel@jms.id.au>
- kexec support for the generic MIPS platform when running on a CPU
including the MIPS Coherence Manager & related hardware.
- Improvements to the definition of memory barriers used around MMIO
accesses, and fixes in their use.
- Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
reliance on the old bootmem code.
- A number of fixes & improvements for Loongson 3 systems.
- DT & config updates for the Microsemi Ocelot platform.
- Workaround to enable USB power on the Netgear WNDR3400v3.
- Various cleanups & fixes.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW9NfwRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN1LNgD9Hy73DkYnnYeLNLcCe+5QMCr+NO2C
kwIs7kAI40X+/LQA/RgCcg6z4rUSH38hfNEobD6VXva7QiFhiYcJj5rCFH8O
=nDQg
-----END PGP SIGNATURE-----
Merge tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
- kexec support for the generic MIPS platform when running on a CPU
including the MIPS Coherence Manager & related hardware.
- Improvements to the definition of memory barriers used around MMIO
accesses, and fixes in their use.
- Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
reliance on the old bootmem code.
- A number of fixes & improvements for Loongson 3 systems.
- DT & config updates for the Microsemi Ocelot platform.
- Workaround to enable USB power on the Netgear WNDR3400v3.
- Various cleanups & fixes.
* tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits)
MIPS: Cleanup DSP ASE detection
MIPS: dts: Change upper case to lower case
MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
MIPS: Loongson-3: Fix BRIDGE irq delivery problem
MIPS: Loongson-3: Fix CPU UART irq delivery problem
MIPS: Remove unused PREF, PREFE & PREFX macros
MIPS: lib: Use kernel_pref & user_pref in memcpy()
MIPS: Remove unused CAT macro
MIPS: Add kernel_pref & user_pref helpers
MIPS: Remove unused TTABLE macro
MIPS: Remove unused PIC macros
MIPS: Remove unused MOVN & MOVZ macros
MIPS: Provide actually relaxed MMIO accessors
MIPS: Enforce strong ordering for MMIO accessors
MIPS: Correct `mmiowb' barrier for `wbflush' platforms
MIPS: Define MMIO ordering barriers
MIPS: mscc: add PCB120 to the ocelot fitImage
MIPS: mscc: add DT for Ocelot PCB120
MIPS: memset: Limit excessive `noreorder' assembly mode use
MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
...
Currently we hardcode a list of files for which we specify that the
toolchain has DSP ASE support when building for MIPSr2 only. This has a
number of problems:
1) It doesn't actually ensure that the toolchain supports the DSP ASE
at all.
2) It's fragile if we try to use DSP ASE macros in other files.
3) It makes no provision for MIPSr6 & later systems which also support
the DSP ASE & end up using the .word directive implementation of
the DSP macros.
Fix this by detecting assembler support for the DSP ASE globally, not
just for a small set of files, and not just for MIPSr2. This now exposes
use of toolchain DSP support to kernel builds targeting MIPSr1 and
older, so we add .set MIPS_ISA_LEVEL directives prior to all .set dsp
directives in order to prevent the assembler from complaining that the
DSP ASE is only supported with MIPSr2 & higher.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20901/
Cc: linux-mips@linux-mips.org
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
For a long time arch/mips/Makefile used nm to discover the kernel entry
point by looking for the address of the kernel_entry symbol. This
doesn't work for systems which make use of bit 0 of the PC to reflect
the ISA mode - ie. microMIPS (and MIPS16, but we don't support building
kernels that target MIPS16 anyway).
So for a while with commit 5fc9484f5e ("MIPS: Set ISA bit in entry-y
for microMIPS kernels") we manually modified the last nibble of the
output from nm, which worked but wasn't particularly pretty.
Commit 27c524d174 ("MIPS: Use the entry point from the ELF file
header") then cleaned this up by using objdump to print the ELF entry
point which includes the ISA bit, rather than using nm to print the
address of the kernel_entry symbol which doesn't. That removed the ugly
replacement of the last nibble, but added its own ugliness by needing to
manually sign extend in the 32 bit case.
Unfortunately it has been pointed out that objdump's output is
localised, and therefore grepping for its "start address" output doesn't
work when the user's language settings are such that objdump doesn't
print in English.
We could simply revert commit 27c524d174 ("MIPS: Use the entry point
from the ELF file header") and return to the manual replacement of the
last nibble of entry-y, but it seems that was found sufficiently
unpalatable to avoid. We could attempt to force the language used by
objdump by setting an environment variable such as LC_ALL, but that
seems fragile. Instead we add a small tool named elf-entry which simply
prints out the entry point of the kernel in the format we require.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Philippe Reynes <philippe.reynes@softathome.com>
Tested-by: Philippe Reynes <philippe.reynes@softathome.com>
Fixes: 27c524d174 ("MIPS: Use the entry point from the ELF file header")
Patchwork: https://patchwork.linux-mips.org/patch/20322/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
When building using clang, always specify -EB or -EL in order to ensure
we target the desired endianness.
Since clang cross compiles using a single compiler build with multiple
targets, our -dumpmachine tests which don't specify clang's --target
argument check output based upon the build machine rather than the
machine our build will target. This means our detection of whether to
specify -EB fails miserably & we never do. Providing the endianness flag
unconditionally for clang resolves this issue & simplifies the clang
path somewhat.
Signed-off-by: Paul Burton <paul.burton@mips.com>
The VDSO Makefile filters CFLAGS to select a subset which it uses whilst
building the VDSO ELF. One of the flags it allows through is the -march=
flag that selects the architecture/ISA to target.
Unfortunately in cases where CONFIG_CPU_MIPS32_R{1,2}=y and the
toolchain defaults to building for MIPS64, the main MIPS Makefile ends
up using the short-form -<arch> flags in cflags-y. This is because the
calls to cc-option always fail to use the long-form -march=<arch> flag
due to the lack of an -mabi=<abi> flag in KBUILD_CFLAGS at the point
where the cc-option function is executed. The resulting GCC invocation
is something like:
$ mips64-linux-gcc -Werror -march=mips32r2 -c -x c /dev/null -o tmp
cc1: error: '-march=mips32r2' is not compatible with the selected ABI
These short-form -<arch> flags are dropped by the VDSO Makefile's
filtering, and so we attempt to build the VDSO without specifying any
architecture. This results in an attempt to build the VDSO using
whatever the compiler's default architecture is, regardless of whether
that is suitable for the kernel configuration.
One encountered build failure resulting from this mismatch is a
rejection of the sync instruction if the kernel is configured for a
MIPS32 or MIPS64 r1 or r2 target but the toolchain defaults to an older
architecture revision such as MIPS1 which did not include the sync
instruction:
CC arch/mips/vdso/gettimeofday.o
/tmp/ccGQKoOj.s: Assembler messages:
/tmp/ccGQKoOj.s:273: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:329: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:520: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:714: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1009: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1114: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1279: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1334: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1374: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1459: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1514: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:1814: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2002: Error: opcode not supported on this processor: mips1 (mips1) `sync'
/tmp/ccGQKoOj.s:2066: Error: opcode not supported on this processor: mips1 (mips1) `sync'
make[2]: *** [scripts/Makefile.build:318: arch/mips/vdso/gettimeofday.o] Error 1
make[1]: *** [scripts/Makefile.build:558: arch/mips/vdso] Error 2
make[1]: *** Waiting for unfinished jobs....
This can be reproduced for example by attempting to build
pistachio_defconfig using Arnd's GCC 8.1.0 mips64 toolchain from
kernel.org:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-mips64-linux.tar.xz
Resolve this problem by using the long-form -march=<arch> in all cases,
which makes it through the arch/mips/vdso/Makefile's filtering & is thus
consistently used to build both the kernel proper & the VDSO.
The use of cc-option to prefer the long-form & fall back to the
short-form flags makes no sense since the short-form is just an
abbreviation for the also-supported long-form in all GCC versions that
we support building with. This means there is no case in which we have
to use the short-form -<arch> flags, so we can simply remove them.
The manual redefinition of _MIPS_ISA is removed naturally along with the
use of the short-form flags that it accompanied, and whilst here we
remove the separate assembler ISA selection. I suspect that both of
these were only required due to the mips32 vs mips2 mismatch that was
introduced by commit 59b3e8e9aa ("[MIPS] Makefile crapectomy.") and
fixed but not cleaned up by commit 9200c0b2a0 ("[MIPS] Fix Makefile
bugs for MIPS32/MIPS64 R1 and R2.").
I've marked this for backport as far as v4.4 where the MIPS VDSO was
introduced. In earlier kernels there should be no ill effect to using
the short-form flags.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: James Hogan <jhogan@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/19579/
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In order to fetch the correct entry point with the ISA bit included, for
use by non-ELF boot loaders, parse the output of `objdump -f' for the
start address recorded in the kernel executable itself, rather than
using `nm' to get the value of the `kernel_entry' symbol.
Sign-extend the address retrieved if 32-bit, so that execution is
correctly started on 64-bit processors as well. The tool always prints
the entry point using either 8 or 16 hexadecimal digits, matching the
address width (aka class) of the ELF file, even in the presence of
leading zeros.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18912/
Signed-off-by: James Hogan <jhogan@kernel.org>
Expand the MIPS Makefile help text to list generic board names, generic
defconfigs, and legacy defconfigs which have been converted to generic
and are still usable.
Here's a snippet of the new "make ARCH=mips help" output:
...
If you are targeting a system supported by generic kernels you may
configure the kernel for a given architecture target like so:
{micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">
Where BOARDS is some subset of the following:
boston
ni169445
ranchu
sead-3
xilfpga
Specifically the following generic default configurations are
supported:
32r1_defconfig - Build generic kernel for MIPS32 r1
32r1el_defconfig - Build generic kernel for MIPS32 r1 little endian
32r2_defconfig - Build generic kernel for MIPS32 r2
32r2el_defconfig - Build generic kernel for MIPS32 r2 little endian
32r6_defconfig - Build generic kernel for MIPS32 r6
32r6el_defconfig - Build generic kernel for MIPS32 r6 little endian
64r1_defconfig - Build generic kernel for MIPS64 r1
64r1el_defconfig - Build generic kernel for MIPS64 r1 little endian
64r2_defconfig - Build generic kernel for MIPS64 r2
64r2el_defconfig - Build generic kernel for MIPS64 r2 little endian
64r6_defconfig - Build generic kernel for MIPS64 r6
64r6el_defconfig - Build generic kernel for MIPS64 r6 little endian
micro32r2_defconfig - Build generic kernel for microMIPS32 r2
micro32r2el_defconfig - Build generic kernel for microMIPS32 r2 little endian
The following legacy default configurations have been converted to
generic and can still be used:
sead3_defconfig - Build 32r2el_defconfig BOARDS=sead-3
sead3micro_defconfig - Build micro32r2el_defconfig BOARDS=sead-3
xilfpga_defconfig - Build 32r2el_defconfig BOARDS=xilfpga
...
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18598/
Define legacy defconfigs which have been converted to the generic
platform more programatically, so that they can be listed in the
Makefile help text and as a separate Makefile target without
duplication.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18596/
This module registers crc32 and crc32c algorithms that use the
optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Patchwork: https://patchwork.linux-mips.org/patch/18601/
[jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers'
suggestion, due to commit a208fa8f33 ("crypto: hash - annotate
algorithms taking optional key") in v4.16-rc1]
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of
directly encoding them with the _ASM_INSN* macros, and transparently
implement these instructions as assembler macros if the toolchain
doesn't support them natively, using the recently introduced assembler
macro helpers.
The old direct encodings were restricted to using the register $at, so
this allows the extra register moves to go away (saving a grand total of
24 bytes).
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17775/
vmlinuz is not built by default for platforms using
COMPRESSION_FNAME (e.g. Malta) due to an erroneous
check on ZBOOT
Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18466/
Signed-off-by: James Hogan <jhogan@kernel.org>
The default system type should be a MIPS generic kernel. In order to
include some level of board support, select a 32r2el generic defconfig
by default. The alternative would be to use "generic_defconfig" but
rather unintuitvely that is a bare bones configuration with no platform
support so is not usable in practice.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14715/
Signed-off-by: James Hogan <jhogan@kernel.org>
Using generic_defconfig directly is unlikely to be what a user actually
wants to do - it doesn't specify any particular ISA revision & it
doesn't enable any board or driver support, resulting in a largely
useless kernel.
Prevent users from using it directly, printing a helpful message to
point them in the right direction if they attempt to.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16946/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Up until now when configuring a generic kernel all board config
fragments have been merged by default unless boards are explicitly
selected by the user specifying BOARDS=.
In many cases this is sub-optimal, since some boards don't make sense to
include in some kernels. For example the MIPS SEAD-3 development board
has only ever been used with 32 bit CPUs, so including support for the
SEAD-3 in a 64 bit kernel is wasteful.
This patch introduces support for specifying requirements in board
config fragments, using comments formatted like so:
# require CONFIG_BLA=y
For example the SEAD-3 board could specify that it should only be merged
for 32 bit kernels using a requirement line like the following:
# require CONFIG_32BIT=y
A new generic-board-config.sh script is introduced to handle selecting
the board config fragments to merge & calling merge_config.sh to merge
them. In order to allow requirements to check Kconfig symbols that are
implicitly selected, rather than explicitly specified by
generic_defconfig or one of the ISA config fragments, an intermediate
.config file is saved & used as a reference when checking requirements.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16943/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation for splitting arch/mips/generic/vmlinux.its.S into
multiple files such that it doesn't become a conflict magnet as boards
are added, allow platforms to specify a list of image tree source files
which will be concatenated to form the final source used to build the
image tree.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16938/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The kernel contains a small amount of incomplete code aimed at
supporting old R6000 CPUs. This is:
- Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000.
- Broken, since there are glaring errors such as r6000_fpu.S moving
the FCSR register to t1, then ignoring it & instead saving t0 into
struct sigcontext...
- A maintenance headache, since it's code that nobody can test which
nevertheless imposes constraints on code which it shares with other
machines.
Remove this incomplete & broken R6000 CPU support in order to clean up
and in preparation for changes which will no longer need to consider
dragging the pretense of R6000 support along with them.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16236/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When building a kernel for the microMIPS ISA, ensure that the ISA bit
(ie. bit 0) in the entry address is set. Otherwise we may include an
entry address in images which bootloaders will jump to as MIPS32 code.
I originally tried using "objdump -f" to obtain the entry address, which
works for microMIPS but it always outputs a 32 bit address for a 32 bit
ELF whilst nm will sign extend to 64 bit. That matters for systems where
we might want to run a MIPS32 kernel on a MIPS64 CPU & load it with a
MIPS64 bootloader, which would then jump to a non-canonical
(non-sign-extended) address.
This works in all cases as it only changes the behaviour for microMIPS
kernels, but isn't the prettiest solution. A possible alternative would
be to write a custom tool to just extract, sign extend & print the entry
point of an ELF executable. I'm open to feedback if that would be
preferred.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16950/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add "-modd-spreg" when compiling the kernel for mips32r6 target.
This makes sure the kernel builds properly even with toolchains that
use "-mno-odd-spreg" by default. This is the case with Android gcc.
Prior to this patch, kernel builds using gcc for Android failed with
following error messages, if target architecture is set to mips32r6:
arch/mips/kernel/r4k_switch.S: Assembler messages:
.../r4k_switch.S:210: Error: float register should be even, was 1
.../r4k_switch.S:212: Error: float register should be even, was 3
.../r4k_switch.S:214: Error: float register should be even, was 5
.../r4k_switch.S:216: Error: float register should be even, was 7
.../r4k_switch.S:218: Error: float register should be even, was 9
.../r4k_switch.S:220: Error: float register should be even, was 11
.../r4k_switch.S:222: Error: float register should be even, was 13
.../r4k_switch.S:224: Error: float register should be even, was 15
.../r4k_switch.S:226: Error: float register should be even, was 17
.../r4k_switch.S:228: Error: float register should be even, was 19
.../r4k_switch.S:230: Error: float register should be even, was 21
.../r4k_switch.S:232: Error: float register should be even, was 23
.../r4k_switch.S:234: Error: float register should be even, was 25
.../r4k_switch.S:236: Error: float register should be even, was 27
.../r4k_switch.S:238: Error: float register should be even, was 29
.../r4k_switch.S:240: Error: float register should be even, was 31
make[2]: *** [arch/mips/kernel/r4k_switch.o] Error 1
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Cc: James.Hogan@imgtec.com
Cc: Paul.Burton@imgtec.com
Cc: Raghu.Gandham@imgtec.com
Cc: Leonid.Yegoshin@imgtec.com
Cc: Douglas.Leung@imgtec.com
Cc: Petar.Jovanovic@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16509/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When specifying a generic defconfig target with O=... option set, make
is invoked in the output location before a target makefile wrapper is
created. Ensure that the correct makefile is used by specifying the
kernel source makefile during make invocation.
This fixes the either of the following errors:
$ make sead3_defoncifg ARCH=mips O=test
make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test'
make[2]: *** No rule to make target '32r2el_defconfig'. Stop.
arch/mips/Makefile:506: recipe for target 'sead3_defconfig' failed
make[1]: *** [sead3_defconfig] Error 2
make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test'
Makefile:152: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
$ make 32r2el_defconfig ARCH=mips O=test
make[1]: Entering directory '/mnt/ssd/MIPS/linux-next/test'
Using ../arch/mips/configs/generic_defconfig as base
Merging ../arch/mips/configs/generic/32r2.config
Merging ../arch/mips/configs/generic/el.config
Merging ../arch/mips/configs/generic/board-sead-3.config
!
! merged configuration written to .config (needs make)
!
make[2]: *** No rule to make target 'olddefconfig'. Stop.
arch/mips/Makefile:489: recipe for target '32r2el_defconfig' failed
make[1]: *** [32r2el_defconfig] Error 2
make[1]: Leaving directory '/mnt/ssd/MIPS/linux-next/test'
Makefile:152: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
Fixes: eed0eabd12 ('MIPS: generic: Introduce generic DT-based board support')
Fixes: 3f5f0a4475 ('MIPS: generic: Convert SEAD-3 to a generic board')
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15464/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Disable stack checking on MIPS kernels. Some distribution toolchains
might pass the -fstack-check option to gcc. This results in a
store-doubleword instruction being emitted at the top of all
functions that checks the available stack space. E.g.,
a80000000001d740 <per_cpu_init>:
a80000000001d740: ffa0bfc0 sd zero,-16448(sp)
a80000000001d744: 2405ffc9 li a1,-55
a80000000001d748: 67bdffc0 daddiu sp,sp,-64
Generally, this is undesirable, and especially on the SGI IP27
platform, it will trigger a NULL pointer dereference in
'_raw_spin_lock_irq' during early init.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Suggested-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15132/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
A clean mips64 build produces no output except for two lines:
Checking missing-syscalls for N32
Checking missing-syscalls for O32
On other architectures, there is no output at all, so let's do the
same here for the sake of build testing. The 'kecho' macro is used
to print the message on a normal build but skip it with 'make -s'.
Fixes: e48ce6b8df ("[MIPS] Simplify missing-syscalls for N32 and O32")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15040/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When relocatable support for MIPS was merged, there was no support for
an architecture to add a postlink step for vmlinux. This meant that only
invoking a target within the boot directory, such as uImage, caused the
relocations to be inserted into vmlinux. Building just the vmlinux
target would result in a relocatable kernel with no relocation
information present.
Commit fbe6e37dab ("kbuild: add arch specific post-link Makefile")
recified this situation, so MIPS can now define a postlink step to add
relocation information into vmlinux, and remove the additional steps
tacked onto boot targets.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14554/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since
the extraction code is inside the image, it does not depend on the
boot loader to extract the kernel.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14473/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Changes introduced to arch/mips/Makefile for the generic kernel resulted
in build errors when making a compressed image if platform-y has multiple
values, like this:
make[2]: *** No rule to make target `alchemy/'.
make[1]: *** [vmlinuz] Error 2
make[1]: Target `_all' not remade because of errors.
make: *** [sub-make] Error 2
make: Target `_all' not remade because of errors.
Fix this by quoting $(platform-y) as it is passed to the Makefile in
arch/mips/boot/compressed/Makefile
Reported-by: kernelci.org bot <bot@kernelci.org>
Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14405/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.
Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.
Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.
Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for generating kernel images in the Flattened Image Tree
(.itb) format as supported by U-Boot. This format is essentially a
Flattened Device Tree binary containing images (kernels, DTBs, ramdisks)
and configurations which link those images together. The big advantages
of FIT images over the uImage format are:
- We can include FDTs in the kernel image in a way that the bootloader
can extract it & manipulate it before providing it to the kernel.
Thus we can ship FDTs as part of the kernel giving us the advantages
of being able to develop & maintain the DT within the kernel tree,
but also have the benefits of the bootloader being able to
manipulate the FDT. Example uses for this would be to inject the
kernel command line into the chosen node, or to fill in the correct
memory size.
- We can include multiple configurations in a single kernel image.
This means that a single FIT image can, given appropriate
bootloaders, be booted on different boards with the bootloader
selecting an appropriate configuration & providing the correct FDT
to the kernel.
- We can support a multitude of hashes over the data.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
added Kconfig entries allowing for the compact branch policy used by the
compiler for MIPSr6 kernels to be specified. This can be useful for
debugging, particularly in systems where compact branches have recently
been introduced.
Unfortunately mainline gcc 5.x supports MIPSr6 but not the
-mcompact-branches compiler flag, leading to MIPSr6 kernels failing to
build with gcc 5.x with errors such as:
mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal'
make[2]: *** [kernel/bounds.s] Error 1
Fixing this by hiding the Kconfig entry behind another seems to be more
hassle than it's worth, as MIPSr6 & compact branches have been around
for a while now and if policy does need to be set for debug it can be
done easily enough with KCFLAGS. Therefore remove the compact branch
policy Kconfig entries & their handling in the Makefile.
This reverts commit c1a0e9bc88 ("MIPS: Allow compact branch policy to
be changed").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The VZ guest register & TLB access macros introduced in commit "MIPS:
Add guest CP0 accessors" use VZ ASE specific instructions that aren't
understood by versions of binutils prior to 2.24.
Add a check for whether the toolchain supports the -mvirt option,
similar to the MSA toolchain check, and implement the accessors using
.word if not.
Due to difficulty in converting compiler specified registers (e.g. "$3")
to usable numbers (e.g. "3") in inline asm, we need to copy to/from a
temporary register, namely the assembler temporary (at/$1), and specify
guest CP0 registers numerically in the gc0 macros.
Fixes: 7eb9111822 ("MIPS: Add guest CP0 accessors")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-next@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13255/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When CONFIG_RELOCATABLE is enabled (added in later patch) add
--emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains
relocation information.
Run the previously added relocs tool to fill in the .data.relocs section
of vmlinux with a table of relocations. The relocs tool will also remove
(mark as 0 length) the relocation sections added to vmlinux.
When vmlinux is passed to the boot makefile for conversion into a boot
image the now empty relocation sections will be removed and the
populated relocation table will be included in the binary image.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12983/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise
we use -march=mips64r2, this can slightly improve performance. Besides,
arch/mips/loongson64/Platform is a better location rather than arch/
mips/Makefile.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12161/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When debugging it can be helpful to change the policy for compiler use
of MIPSr6 compact branches, in order to rule out or home in on their
involvement in bugs. Allow the GCC -mcompact-branches= flag to be set
via Kconfig under the "Kernel hacking" menu.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11178/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pass 1 parts had a number of significant erratas and were only available
in small numbers and under NDA. Full support also required the use of a
special toolchain that kept branches properly aligned. These workarounds
were never upstreamed and the only toolchain known to have them is
Montavista's GCC 3.0-based toolchain which completly obsoleted if not
useless these days.
So now that automated testing has tripped over the user of the
-msb1-pass1-workarounds option, rather than fixing it remove support for
pass 1 parts.
Probably nobody will notice. I seem to own the last know pass 1 board
and I haven't noticed another one in the wild in the past decade, at
least.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse
command line (and build fails with: /bin/sh: syntax error:
unexpected "(") since make tries to expand starting with the dollar
sign with a make variable. Prevent that by using double dollar sign.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10025/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for Linux 4.1. Most
noteworthy:
- Add more Octeon-optimized crypto functions
- Octeon crypto preemption and locking fixes
- Little endian support for Octeon
- Use correct CSR to soft reset Octeons
- Support LEDs on the Octeon-based DSR-1000N
- Fix PCI interrupt mapping for the Octeon-based DSR-1000N
- Mark prom_free_prom_memory() as __init for a number of systems
- Support for Imagination's Pistachio SOC. This includes arch and
CLK bits. I'd like to merge pinctrl bits later
- Improve parallelism of csum_partial for certain pipelines
- Organize DTB files in subdirs like other architectures
- Implement read_sched_clock for all MIPS platforms other than
Octeon
- Massive series of 38 fixes and cleanups for the FPU emulator /
kernel
- Further FPU remulator work to support new features. This sits on a
separate branch which also has been pulled into the 4.1 KVM branch
- Clean up and fixes for the SEAD3 eval board; remove unused file
- Various updates for Netlogic platforms
- A number of small updates for Loongson 3 platforms
- Increase the memory limit for ATH79 platforms to 256MB
- A fair number of fixes and updates for BCM47xx platforms
- Finish the implementation of XPA support
- MIPS FDC support. No, not floppy controller but Fast Debug Channel :)
- Detect the R16000 used in SGI legacy platforms
- Fix Kconfig dependencies for the SSB bus support"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits)
MIPS: Makefile: Fix MIPS ASE detection code
MIPS: asm: elf: Set O32 default FPU flags
MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
MIPS: Kconfig: Disable SMP/CPS for 64-bit
MIPS: Hibernate: flush TLB entries earlier
MIPS: smp-cps: cpu_set FPU mask if FPU present
MIPS: lose_fpu(): Disable FPU when MSA enabled
MIPS: ralink: add missing symbol for RALINK_ILL_ACC
MIPS: ralink: Fix bad config symbol in PCI makefile.
SSB: fix Kconfig dependencies
MIPS: Malta: Detect and fix bad memsize values
Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
MIPS: Fix cpu_has_mips_r2_exec_hazard.
MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
MIPS: unaligned: Fix regular load/store instruction emulation for EVA
MIPS: unaligned: Surround load/store macros in do {} while statements
...
Commit 32098ec7bc ("MIPS: Makefile: Move the ASEs checks after
setting the core's CFLAGS") re-arranged the MIPS ASE detection code
and also added the current cflags to the detection logic. However,
this introduced a few bugs. First of all, the mips-cflags should not
be quoted since that ends up being passed as a string to subsequent
commands leading to broken detection from the cc-option-* tools.
Moreover, in order to avoid duplicating the cflags-y because of how
cc-option works, we rework the logic so we pass only those cflags which
are needed by the selected ASE. Finally, fix some typos resulting in MSA
not being detected correctly.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: Commit 32098ec7bc ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9661/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.
To use relative path in any places, this commit moves the option
above the "sub-make" target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Allow more compression algorithms as well as uncompressed uImage.bin
to be generated. An uncompressed image might be useful to rule out
problems in the decompression code in the bootloader or even speed
up the boot process at the expense of a bigger uImage file.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Masahiro Yamada