During system resume, ata_port_pm_resume() triggers ata EH to
1) Resume the controller
2) Reset and rescan the ports
3) Revalidate devices
This EH execution is started asynchronously from ata_port_pm_resume(),
which means that when sd_resume() is executed, none or only part of the
above processing may have been executed. However, sd_resume() issues a
START STOP UNIT to wake up the drive from sleep mode. This command is
translated to ATA with ata_scsi_start_stop_xlat() and issued to the
device. However, depending on the state of execution of the EH process
and revalidation triggerred by ata_port_pm_resume(), two things may
happen:
1) The START STOP UNIT fails if it is received before the controller has
been reenabled at the beginning of the EH execution. This is visible
with error messages like:
ata10.00: device reported invalid CHS sector 0
sd 9:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
sd 9:0:0:0: [sdc] Sense Key : Illegal Request [current]
sd 9:0:0:0: [sdc] Add. Sense: Unaligned write command
sd 9:0:0:0: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x90 returns -5
sd 9:0:0:0: PM: failed to resume async: error -5
2) The START STOP UNIT command is received while the EH process is
on-going, which mean that it is stopped and must wait for its
completion, at which point the command is rather useless as the drive
is already fully spun up already. This case results also in a
significant delay in sd_resume() which is observable by users as
the entire system resume completion is delayed.
Given that ATA devices will be woken up by libata activity on resume,
sd_resume() has no need to issue a START STOP UNIT command, which solves
the above mentioned problems. Do not issue this command by introducing
the new scsi_device flag no_start_on_resume and setting this flag to 1
in ata_scsi_dev_config(). sd_resume() is modified to issue a START STOP
UNIT command only if this flag is not set.
Reported-by: Paul Ausbeck <paula@soe.ucsc.edu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Tanner Watkins <dalzot@gmail.com>
Tested-by: Paul Ausbeck <paula@soe.ucsc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
Martin Wilck <mwilck@suse.com> says:
This patch series addresses some issues we saw in a test setup with a
large number of SCSI LUNs. The first two patches simply increase the
number of available sg and bsg devices. 3-5 fix a large delay we
encountered between blocking a Fibre Channel remote port and the
dev_loss_tmo. 6 renames scsi_target_block() to scsi_block_targets(),
and makes additional changes to this API, as suggested in the review
of the v2 series. 7 improves a warning message.
Link: https://lore.kernel.org/r/20230614103616.31857-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All callers (fc_remote_port_delete(), __iscsi_block_session(),
__srp_start_tl_fail_timers(), srp_reconnect_rport(), snic_tgt_del()) pass
parent devices of scsi_target devices to scsi_target_block().
Rename the function to scsi_block_targets(), and simplify it by assuming
that it is always passed a parent device. Also, have callers pass the
Scsi_Host pointer to scsi_block_targets(), as every caller has this pointer
readily available.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20230614103616.31857-7-mwilck@suse.com
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of passing a fmode_t and only checking it for FMODE_WRITE, pass
a bool open_for_write to prepare for callers that won't have the fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of passing a fmode_t and only checking it for FMODE_WRITE, pass
a bool open_for_write to prepare for callers that won't have the fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche <bvanassche@acm.org> says:
In the traces we recorded while testing zoned storage we noticed that UFS
commands are requeued while the clock is being ungated. Command requeueing
makes it harder than necessary to preserve the command order. Hence this
patch series that modifies the SCSI core and also the UFS driver such that
clock ungating does not trigger command requeueing.
Link: https://lore.kernel.org/r/20230529202640.11883-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Niklas Cassel <nks@flawful.org> says:
This series adds support for Command Duration Limits.
The series is based on linux tag: v6.4-rc1
The series can also be found in git: https://github.com/floatious/linux/commits/cdl-v7
=================
CDL in ATA / SCSI
=================
Command Duration Limits is defined in:
T13 ATA Command Set - 5 (ACS-5) and
T10 SCSI Primary Commands - 6 (SPC-6) respectively
(a simpler version of CDL is defined in T10 SPC-5).
CDL defines Duration Limits Descriptors (DLD).
7 DLDs for read commands and 7 DLDs for write commands.
Simply put, a DLD contains a limit and a policy.
A command can specify that a certain limit should be applied by setting
the DLD index field (3 bits, so 0-7) in the command itself.
The DLD index points to one of the 7 DLDs.
DLD index 0 means no descriptor, so no limit.
DLD index 1-7 means DLD 1-7.
A DLD can have a few different policies, but the two major ones are:
-Policy 0xF (abort), command will be completed with command aborted error
(ATA) or status CHECK CONDITION (SCSI), with sense data indicating that
the command timed out.
-Policy 0xD (complete-unavailable), command will be completed without
error (ATA) or status GOOD (SCSI), with sense data indicating that the
command timed out. Note that the command will not have transferred any
data to/from the device when the command timed out, even though the
command returned success.
Regardless of the CDL policy, in case of a CDL timeout, the I/O will
result in a -ETIME error to user-space.
The DLDs are defined in the CDL log page(s) and are readable and writable.
Reading and writing the CDL DLDs are outside the scope of the kernel.
If a user wants to read or write the descriptors, they can do so using a
user-space application that sends passthrough commands, such as cdl-tools:
https://github.com/westerndigitalcorporation/cdl-tools
================================
The introduction of ioprio hints
================================
What the kernel does provide, is a method to let I/O use one of the CDL DLDs
defined in the device. Note that the kernel will simply forward the DLD index
to the device, so the kernel currently does not know, nor does it need to know,
how the DLDs are defined inside the device.
The way that the CDL DLD index is supplied to the kernel is by introducing a
new 10 bit "ioprio hint" field within the existing 16 bit ioprio definition.
Currently, only 6 out of the 16 ioprio bits are in use, the remaining 10 bits
are unused, and are currently explicitly disallowed to be set by the kernel.
For now, we only add ioprio hints representing CDL DLD index 1-7. Additional
ioprio hints for other QoS features could be defined in the future.
A theoretical future work could be to make an I/O scheduler aware of these
hints. E.g. for CDL, an I/O scheduler could make use of the duration limit
in each descriptor, and take that information into account while scheduling
commands. Right now, the ioprio hints will be ignored by the I/O schedulers.
==============================
How to use CDL from user-space
==============================
Since CDL is mutually exclusive with NCQ priority
(see ncq_prio_enable and sas_ncq_prio_enable in
Documentation/ABI/testing/sysfs-block-device),
CDL has to be explicitly enabled using:
echo 1 > /sys/block/$bdev/device/cdl_enable
Since the ioprio hints are supplied through the existing I/O priority API,
it should be simple for an application to make use of the ioprio hints.
It simply has to reuse one of the new macros defined in
include/uapi/linux/ioprio.h: IOPRIO_PRIO_HINT() or IOPRIO_PRIO_VALUE_HINT(),
and supply one of the new hints defined in include/uapi/linux/ioprio.h:
IOPRIO_HINT_DEV_DURATION_LIMIT_[1-7], which indicates that the I/O should
use the corresponding CDL DLD index 1-7.
By reusing the I/O priority API, the user can both define a DLD to use per
AIO (io_uring sqe->ioprio or libaio iocb->aio_reqprio) or per-thread
(ioprio_set()).
=======
Testing
=======
With the following fio patches:
https://github.com/floatious/fio/commits/cdl
fio adds support for ioprio hints, such that CDL can be tested using e.g.:
fio --ioengine=io_uring --cmdprio_percentage=10 --cmdprio_hint=DLD_index
A simple way to test is to use a DLD with a very short duration limit,
and send large reads. Regardless of the CDL policy, in case of a CDL
timeout, the I/O will result in a -ETIME error to user-space.
We also provide a CDL test suite located in the cdl-tools repo, see:
https://github.com/westerndigitalcorporation/cdl-tools#testing-a-system-command-duration-limits-support
We have tested this patch series using:
-real hardware
-the following QEMU implementation:
https://github.com/floatious/qemu/tree/cdl
(NOTE: the QEMU implementation requires you to define the CDL policy at compile
time, so you currently need to recompile QEMU when switching between policies.)
===================
Further information
===================
For further information about CDL, see Damien's slides:
Presented at SDC 2021:
https://www.snia.org/sites/default/files/SDC/2021/pdfs/SNIA-SDC21-LeMoal-Be-On-Time-command-duration-limits-Feature-Support-in%20Linux.pdf
Presented at Lund Linux Con 2022:
https://drive.google.com/file/d/1I6ChFc0h4JY9qZdO1bY5oCAdYCSZVqWw/view?usp=sharing
================
Changes since V6
================
-Rebased series on v6.4-rc1.
-Picked up Reviewed-by tags from Hannes (Thank you Hannes!)
-Picked up Reviewed-by tag from Christoph (Thank you Christoph!)
-Changed KernelVersion from 6.4 to 6.5 for new sysfs attributes.
For older change logs, see previous patch series versions:
https://lore.kernel.org/linux-scsi/20230406113252.41211-1-nks@flawful.org/https://lore.kernel.org/linux-scsi/20230404182428.715140-1-nks@flawful.org/https://lore.kernel.org/linux-scsi/20230309215516.3800571-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20230124190308.127318-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20230112140412.667308-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20221208105947.2399894-1-niklas.cassel@wdc.com/
Link: https://lore.kernel.org/r/20230511011356.227789-1-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the sysfs scsi_device attribute cdl_enable to allow a user to enable or
disable a device command duration limits feature. CDL is disabled by
default. This feature must be explicitly enabled by a user by setting the
cdl_enable attribute to 1.
The new function scsi_cdl_enable() does not do anything beside setting the
cdl_enable field of struct scsi_device in the case of a (real) SCSI device
(e.g. a SAS HDD). For ATA devices, the command duration limits feature
needs to be enabled/disabled using the ATA feature sub-page of the control
mode page. To do so, the scsi_cdl_enable() function checks if this mode
page is supported using scsi_mode_sense(). If it is, scsi_mode_select() is
used to enable and disable CDL.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-10-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce the function scsi_cdl_check() to detect if a device supports
command duration limits (CDL). Support for the READ 16, WRITE 16, READ 32
and WRITE 32 commands are checked using the function scsi_report_opcode()
to probe the rwcdlp and cdlp bits as they indicate the mode page defining
the command duration limits descriptors that apply to the command being
tested.
If any of these commands support CDL, the field cdl_supported of struct
scsi_device is set to 1 to indicate that the device supports CDL.
Support for CDL for a device is advertizes through sysfs using the new
cdl_supported device attribute. This attribute value is 1 for a device
supporting CDL and 0 otherwise.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-9-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The REPORT_SUPPORTED_OPERATION_CODES command allows checking for support of
commands that have the same opcode but different service actions, such as
READ 32 and WRITE 32. However, the current implementation of
scsi_report_opcode() only allows checking an operation code without a
service action differentiation.
Add the "sa" argument to scsi_report_opcode() to allow passing a service
action. If a non-zero service action is specified, the reporting options
field value is set to 3 to have the service action field taken into account
by the device. If no service action field is specified (zero), the
reporting options field is set to 1 as before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-8-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow scsi_mode_sense() to retrieve sub-pages of mode pages by adding the
subpage argument. Change all the current caller sites to specify the
subpage 0.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-7-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In SCSI, we get the sense data as part of the completion, for ATA however,
we need to fetch the sense data as an extra step. For an aborted ATA
command the sense data is fetched via libata's ->eh_strategy_handler().
For Command Duration Limits policy 0xD:
The device shall complete the command without error with the additional
sense code set to DATA CURRENTLY UNAVAILABLE.
In order to handle this policy in libata, we intend to send a successful
command via SCSI EH, and let libata's ->eh_strategy_handler() fetch the
sense data for the good command. This is similar to how we handle an
aborted ATA command, just that we need to read the Successful NCQ Commands
log instead of the NCQ Command Error log.
When we get a SATA completion with successful commands, ATA_SENSE will be
set, indicating that some commands in the completion have sense data.
The sense_valid bitmask in the Sense Data for Successful NCQ Commands log
will inform exactly which commands that had sense data, which might be a
subset of all the commands that was completed in the same completion. (Yet
all will have ATA_SENSE set, since the status is per completion.)
The successful commands that have e.g. a "DATA CURRENTLY UNAVAILABLE" sense
data will have a SCSI ML byte set, so scsi_eh_flush_done_q() will not set
the scmd->result to DID_TIME_OUT for these commands. However, the
successful commands that did not have sense data, must not get their result
marked as DID_TIME_OUT by SCSI EH.
Add a new flag SCMD_FORCE_EH_SUCCESS, which tells SCSI EH to not mark a
command as DID_TIME_OUT, even if it has scmd->result == SAM_STAT_GOOD.
This will be used by libata in a subsequent commit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-5-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The patches in this thread allow us to use the block pr_ops with LIO's
target_core_iblock module to support cluster applications in VMs. They
were built over Linus's tree. They also apply over linux-next and
Martin's tree and Jens's trees.
Currently, to use windows clustering or linux clustering (pacemaker +
cluster labs scsi fence agents) in VMs with LIO and vhost-scsi, you
have to use tcmu or pscsi or use a cluster aware FS/framework for the
LIO pr file. Setting up a cluster FS/framework is pain and waste when
your real backend device is already a distributed device, and pscsi
and tcmu are nice for specific use cases, but iblock gives you the
best performance and allows you to use stacked devices like
dm-multipath. So these patches allow iblock to work like pscsi/tcmu
where they can pass a PR command to the backend module. And then
iblock will use the pr_ops to pass the PR command to the real devices
similar to what we do for unmap today.
The patches are separated in the following groups:
Patch 1 - 2:
- Add block layer callouts for reading reservations and rename reservation
error code.
Patch 3 - 5:
- SCSI support for new callouts.
Patch 6:
- DM support for new callouts.
Patch 7 - 13:
- NVMe support for new callouts.
Patch 14 - 18:
- LIO support for new callouts.
This patchset has been tested with the libiscsi PGR ops and with
window's failover cluster verification test. Note that for scsi
backend devices we need this patchset:
https://lore.kernel.org/linux-scsi/20230123221046.125483-1-michael.christie@oracle.com/T/#m4834a643ffb5bac2529d65d40906d3cfbdd9b1b7
to handle UAs. To reduce the size of this patchset that's being done
separately to make reviewing easier. And to make merging easier this
patchset and the one above do not have any conflicts so can be merged
in different trees.
Link: https://lore.kernel.org/r/20230407200551.12660-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
This adds support in sd.c for the block PR read keys and read reservation
callouts, so upper layers like LIO can get the PR info that's been setup
using the existing pr callouts and return it to initiators.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-6-michael.christie@oracle.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LIO is going to want to do the same block to/from SCSI pr types as sd.c
so this moves the sd_pr_type helper to scsi_common and renames it. The
next patch will then also add a helper to go from the SCSI value to the
block one for use with PERSISTENT_RESERVE_IN commands.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-5-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make it explicit that the SCSI host template is not modified.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-50-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Declare the SCSI host template pointer members const and also the remaining
SCSI host template pointers in the SCSI core.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hu Haowen <src.res@email.cn>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd
Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl
Reviewed-by: Alex Shi <alexs@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi
Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some storage, such as AIX VDASD (virtual storage) and IBM 2076 (front
end), fail as a result of commit c92a6b5d63 ("scsi: core: Query VPD
size before getting full page").
That commit changed getting SCSI VPD pages so that we now read just
enough of the page to get the actual page size, then read the whole
page in a second read. The problem is that the above mentioned
hardware returns zero for the page size, because of a firmware
error. In such cases, until the firmware is fixed, this new blacklist
flag says to revert to the original method of reading the VPD pages,
i.e. try to read a whole buffer's worth on the first try.
[mkp: reworked somewhat]
Fixes: c92a6b5d63 ("scsi: core: Query VPD size before getting full page")
Reported-by: Martin Wilck <mwilck@suse.com>
Suggested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Link: https://lore.kernel.org/r/20220928181350.9948-1-leeman.duncan@gmail.com
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major
core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY/Z7BSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfF9AP9HzZaZ
0XumuxjchcJHRntcIAzb9kE62SSWFxBrgZQCtAEAyhAO1zK284esgCa+arkzEC7p
uhxpufQSGnYvbasStsU=
=VsH1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
Allow SCSI LLDs to specify SCMD_* flags.
Link: https://lore.kernel.org/r/20230210193258.4004923-2-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The LLDD and the stack currently process FPINs received from the fabric,
but the stack is not aware of any action taken by the driver to alleviate
congestion. The current interface between the driver and the SCSI stack is
limited to passing the notification mainly for statistics and heuristics.
The reaction to an FPIN could be handled either by the driver or by the
stack (marginal path and failover). Amend the interface to indicate if
action on an FPIN has already been reacted to by the LLDDs or not. Add an
additional flag to fc_host_fpin_rcv() to indicate if the FPIN has been
acknowledged/reacted to by the driver.
Also added a new event code FCH_EVT_LINK_FPIN_ACK to notify to the user
that the event has been acknowledged/reacted by the LLDD driver
Link: https://lore.kernel.org/r/20230209034326.882514-1-muneendra.kumar@broadcom.com
Co-developed-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Co-developed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Muneendra <muneendra.kumar@broadcom.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Martin's scsi-staging/next
branch. They add a struct that contains optinal arguments to the
scsi_execute* functions. This will be needed for the patches that
allow the SCSI passthrough users to control retries because I'm adding
a new optional argument. I separated the 2 sets to make it easier to
review and post.
Link: https://lore.kernel.org/r/20221229190154.7467-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_execute() and scsi_execute_req() are no longer used so remove them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the SCSI execution functions to use a struct for passing in optional
args. This commit adds the new struct, temporarily converts scsi_execute()
and scsi_execute_req() ands a new helper, scsi_execute_cmd(), which takes
the scsi_exec_args struct.
There should be no change in behavior. We no longer allow users to pass in
any request->rq_flags value, but they were only passing in RQF_PM which we
do support by allowing users to pass in the BLK_MQ_REQ flags used by
blk_mq_alloc_request().
Subsequent commits will convert scsi_execute() and scsi_execute_req() users
to the new helpers then remove scsi_execute() and scsi_execute_req().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan <yanaijie@huawei.com> says:
A few coding style fixes and cleanups. There should be no functional
changes in this series besides the debug log prints.
Link: https://lore.kernel.org/r/20221214133808.1649122-1-yanaijie@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a SATA
related interface. Also follow the standard coding style to define an
inline empty function when CONFIG_SCSI_SAS_ATA is not enabled.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The coding style where calling this interface is inconsistent with other
interfaces for SATA devices. The standard style for other SATA interfaces
is like:
#ifdefine CONFIG_SCSI_SAS_ATA
void sas_ata_task_abort(struct sas_task *task);
#else
static inline void sas_ata_task_abort(struct sas_task *task)
{
}
#endif
And the callers does not have to do things like "#ifdefine CONFIG_SCSI_SAS_ATA"
and may call the interface directly. So follow the standard style here.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes and small updates. The only things of note is
a qla2xxx fix for crash on hotplug and timeout and the addition of a
user exposed abstraction layer for persistent reservation error return
handling (which necessitates the conversion of nvme.c as well as
SCSI).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY6SZISYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQkdAP9Juri0
ihkyA9tVx1ZslVOp8V8mWK3P2VROA4ArvcMRVwD/Qxf2REP8Fx2GIgC0sNaRedg3
+ncveg3EpZ1n/NXXeDw=
=q+XO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are
some core changes, mostly around reworking some of our user context
assumptions in device put and moving some code around. The remaining
updates are bug fixes and minor changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY5jjrSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9iAPwN++uF
BNlCD36duS8LslKQMPAmFxWt3d/4RWAHsXj2WQEAtu9q8K9PSe1ueb4y+rAEG4oj
2AUQhR3v9ciWBBKlDog=
=JYJC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit 13e60d3ba2
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This converts the SCSI errors we commonly see during PR handling to PR_STS
errors or -Exyz errors. pr_ops callers can then handle SCSI and NVMe errors
without knowing the device types.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20221122032603.32766-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The next patch adds a helper status_byte function that works like
host_byte, so this patch renames the old status_byte to sg_status_byte
since it's only used for SG IO.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20221122032603.32766-3-michael.christie@oracle.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sas_ata_wait_after_reset() does not need to be exported since it is no
longer referenced outside libsas.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-6-zhanjie9@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create function smp_ata_check_ready_type() for LLDDs to wait for SATA
devices to come up after a link reset.
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Link: https://lore.kernel.org/r/20221118083714.4034612-4-zhanjie9@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE(16) for
host-managed zoned block devices, but does not mandate SYNCHRONIZE
CACHE(10). Call SYNCHRONIZE CACHE(16) in place of SYNCHRONIZE CACHE(10) to
ensure that the command is always supported. For this purpose, add
use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw
flag.
To be precise, ZBC does not mandate SYNCHRONIZE CACHE(16) for host-aware
zoned block devices. However, modern devices should support 16-byte
commands. Hence, call SYNCHRONIZE CACHE (16) on both types of ZBC devices,
host-aware and host-managed. Of note is that READ(16) and WRITE(16) have
same story and they are already called for both types of ZBC devices.
Another note is that this patch depends on the fix commit ea045fd344
("ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure").
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221115002905.1709006-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opendource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fill the strucures for supported opcodes and usage bits that are reported
in REPORT SUPPORTED OPERATION CODES command response.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for REPORT SUPPORTED OPERATION CODES command according to SPC4.
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20220906103421.22348-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current behavior for SCSI commands submitted while error recovery is
ongoing is to retry command submission after error recovery has finished.
See also the scsi_host_in_recovery() check in scsi_host_queue_ready(). Add
support for failing SCSI commands while host recovery is in progress. This
functionality will be used to fix a deadlock in the UFS driver.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-4-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6600593cbd ("block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE")
made it impossible for .eh_timed_out() implementations to call
scsi_done() without causing a crash.
Restore support for SCSI timeout handlers to call scsi_done() as follows:
* Change all .eh_timed_out() handlers as follows:
- Change the return type into enum scsi_timeout_action.
- Change BLK_EH_RESET_TIMER into SCSI_EH_RESET_TIMER.
- Change BLK_EH_DONE into SCSI_EH_NOT_HANDLED.
* In scsi_timeout(), convert the SCSI_EH_* values into BLK_EH_* values.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-3-bvanassche@acm.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
blk-mq already provides a unique tag per request. Some libsas LLDDs - like
hisi_sas - already use this tag as the unique per-I/O HW tag.
Add a common function to provide the request associated with a sas_task for
all libsas LLDDs.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1666091763-11023-2-git-send-email-john.garry@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs are all implementing their own attached phy ID finding code. Factor
it out to libsas.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-3-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal