Commit Graph

220 Commits

Author SHA1 Message Date
Toshi Kani 3a19109efb x86/mm: Fix try_preserve_large_page() to handle large PAT bit
try_preserve_large_page() is called from __change_page_attr() to
change the mapping attribute of a given large page.  This function
uses pte_pfn() and pte_pgprot() for PUD/PMD, which do not handle
the large PAT bit properly.

Fix try_preserve_large_page() by using the corresponding pud/pmd
prot/pfn interfaces.

Also remove '#ifdef CONFIG_X86_64', which is not necessary.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-10-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 21:27:33 +02:00
Toshi Kani 34437e67a6 x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
slow_virt_to_phys() calls lookup_address() to obtain *pte and
its level.  It then calls pte_pfn() to obtain a physical address
for any level.  However, this physical address is not correct
when the large PAT bit is set because pte_pfn() does not mask
the large PAT bit properly for PUD/PMD.

Fix slow_virt_to_phys() to use pud_pfn() and pmd_pfn() for 1GB
and 2MB mapping levels.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Robert Elliot <elliott@hpe.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1442514264-12475-8-git-send-email-toshi.kani@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 21:27:33 +02:00
Paul Gortmaker 8f45fe441a x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular
The file pageattr.c is obj-y and it includes pageattr-test.c
based on CPA_DEBUG (a bool), meaning that no code here is
currently being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading
the code there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the
non-modular case, the init ordering remains unchanged with this
commit.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440459295-21814-3-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-25 09:48:38 +02:00
Toshi Kani 623dffb2a2 x86/mm/pat: Add set_memory_wt() for Write-Through type
Now that reserve_ram_pages_type() accepts the WT type, add
set_memory_wt(), set_memory_array_wt() and set_pages_array_wt()
in order to be able to set memory to Write-Through page cache
mode.

Also, extend ioremap_change_attr() to accept the WT type.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-13-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 15:29:00 +02:00
Borislav Petkov 7202fdb1b3 x86/mm/pat: Remove pat_enabled() checks
Now that we emulate a PAT table when PAT is disabled, there's no
need for those checks anymore as the PAT abstraction will handle
those cases too.

Based on a conglomerate patch from Toshi Kani.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-07 15:28:53 +02:00
Stephen Rothwell d6472302f2 x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.

The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.

Also add:

  - <linux/init.h> to <linux/io.h>
  - <asm/pgtable_types> to <asm/io.h>

... which were two other implicit header file dependencies.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ]
Acked-by: David Miller <davem@davemloft.net>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Colin Cross <ccross@android.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-03 12:02:00 +02:00
Luis R. Rodriguez cb32edf65b x86/mm/pat: Wrap pat_enabled into a function API
We use pat_enabled in x86-specific code to see if PAT is enabled
or not but we're granting full access to it even though readers
do not need to set it. If, for instance, we granted access to it
to modules later they then could override the variable
setting... no bueno.

This renames pat_enabled to a new static variable __pat_enabled.
Folks are redirected to use pat_enabled() now.

Code that sets this can only be internal to pat.c. Apart from
the early kernel parameter "nopat" to disable PAT, we also have
a few cases that disable it later and make use of a helper
pat_disable(). It is wrapped under an ifdef but since that code
cannot run unless PAT was enabled its not required to wrap it
with ifdefs, unwrap that. Likewise, since "nopat" doesn't really
change non-PAT systems just remove that ifdef as well.

Although we could add and use an early_param_off(), these
helpers don't use __read_mostly but we want to keep
__read_mostly for __pat_enabled as this is a hot path -- upon
boot, for instance, a simple guest may see ~4k accesses to
pat_enabled(). Since __read_mostly early boot params are not
that common we don't add a helper for them just yet.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-27 14:41:01 +02:00
Dexuan Cui 1fcb61c52b x86/mm/pageattr: Remove an unused variable in slow_virt_to_phys()
The patch doesn't change any logic.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1429776428-4475-1-git-send-email-decui@microsoft.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 11:55:18 +02:00
Luis R. Rodriguez e4b6be33c2 x86/mm: Add ioremap_uc() helper to map memory uncacheable (not UC-)
ioremap_nocache() currently uses UC- by default. Our goal is to
eventually make UC the default. Linux maps UC- to PCD=1, PWT=0
page attributes on non-PAT systems. Linux maps UC to PCD=1,
PWT=1 page attributes on non-PAT systems. On non-PAT and PAT
systems a WC MTRR has different effects on pages with either of
these attributes. In order to help with a smooth transition its
best to enable use of UC (PCD,1, PWT=1) on a region as that
ensures a WC MTRR will have no effect on a region, this however
requires us to have an way to declare a region as UC and we
currently do not have a way to do this.

  WC MTRR on non-PAT system with PCD=1, PWT=0 (UC-) yields WC.
  WC MTRR on non-PAT system with PCD=1, PWT=1 (UC)  yields UC.

  WC MTRR on PAT system with PCD=1, PWT=0 (UC-) yields WC.
  WC MTRR on PAT system with PCD=1, PWT=1 (UC)  yields UC.

A flip of the default ioremap_nocache() behaviour from UC- to UC
can therefore regress a memory region from effective memory type
WC to UC if MTRRs are used. Use of MTRRs should be phased out
and in the best case only arch_phys_wc_add() use will remain,
even if this happens arch_phys_wc_add() will have an effect on
non-PAT systems and changes to default ioremap_nocache()
behaviour could regress drivers.

Now, ideally we'd use ioremap_nocache() on the regions in which
we'd need uncachable memory types and avoid any MTRRs on those
regions. There are however some restrictions on MTRRs use, such
as the requirement of having the base and size of variable sized
MTRRs to be powers of two, which could mean having to use a WC
MTRR over a large area which includes a region in which
write-combining effects are undesirable.

Add ioremap_uc() to help with the both phasing out of MTRR use
and also provide a way to blacklist small WC undesirable regions
in devices with mixed regions which are size-implicated to use
large WC MTRRs. Use of ioremap_uc() helps phase out MTRR use by
avoiding regressions with an eventual flip of default behaviour
or ioremap_nocache() from UC- to UC.

Drivers working with WC MTRRs can use the below table to review
and consider the use of ioremap*() and similar helpers to ensure
appropriate behaviour long term even if default
ioremap_nocache() behaviour changes from UC- to UC.

Although ioremap_uc() is being added we leave set_memory_uc() to
use UC- as only initial memory type setup is required to be able
to accommodate existing device drivers and phase out MTRR use.
It should also be clarified that set_memory_uc() cannot be used
with IO memory, even though its use will not return any errors,
it really has no effect.

  ----------------------------------------------------------------------
  MTRR Non-PAT   PAT    Linux ioremap value        Effective memory type
  ----------------------------------------------------------------------
                                                    Non-PAT |  PAT
       PAT
       |PCD
       ||PWT
       |||
  WC   000      WB      _PAGE_CACHE_MODE_WB            WC   |   WC
  WC   001      WC      _PAGE_CACHE_MODE_WC            WC*  |   WC
  WC   010      UC-     _PAGE_CACHE_MODE_UC_MINUS      WC*  |   WC
  WC   011      UC      _PAGE_CACHE_MODE_UC            UC   |   UC
  ----------------------------------------------------------------------

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fbdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1430343851-967-2-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1431332153-18566-9-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 10:38:45 +02:00
Ross Zwisler 6c434d6176 x86/mm: Do not flush last cacheline twice in clflush_cache_range()
The current algorithm used in clflush_cache_range() can cause
the last cache line of the buffer to be flushed twice. Fix that
algorithm so that each cache line will only be flushed once.

Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/1430259192-18802-1-git-send-email-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/1431332153-18566-5-git-send-email-bp@alien8.de
[ Changed it to 'void *' to simplify the type conversions. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 10:38:44 +02:00
Luis R. Rodriguez e5008abe92 x86/mm: Simplify enabling direct_gbpages
direct_gbpages can be force enabled as an early parameter
but not really have taken effect when DEBUG_PAGEALLOC
or KMEMCHECK is enabled. You can also enable direct_gbpages
right now if you have an x86_64 architecture but your CPU
doesn't really have support for this feature. In both cases
PG_LEVEL_1G won't actually be enabled but direct_gbpages is used
in other areas under the assumptions that PG_LEVEL_1G
was set. Fix this by putting together all requirements
which make this feature sensible to enable under, and only
enable both finally flipping on PG_LEVEL_1G and leaving
PG_LEVEL_1G set when this is true.

We only enable this feature then to be possible on sensible
builds defined by the new ENABLE_DIRECT_GBPAGES. If the
CPU has support for it you can either enable this by using
the DIRECT_GBPAGES option or using the early kernel parameter.
If a platform had support for this you can always force disable
it as well.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: JBeulich@suse.com
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: julia.lawall@lip6.fr
Link: http://lkml.kernel.org/r/1425518654-3403-3-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-05 08:02:12 +01:00
Daniel Borkmann 6bbb614ec4 x86/mm: Unexport set_memory_ro() and set_memory_rw()
This effectively unexports set_memory_ro() and set_memory_rw()
functions, and thus reverts:

  a03352d2c1 ("x86: export set_memory_ro and set_memory_rw").

They have been introduced for debugging purposes in e1000e, but
no module user is in mainline kernel (anymore?) and we
explicitly do not want modules to use these functions, as they
i.e. protect eBPF (interpreted & JIT'ed) images from malicious
modifications or bugs.

Outside of eBPF scope, I believe also other set_memory_*()
functions should be unexported on x86 for modules.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Link: http://lkml.kernel.org/r/a064393a0a5d319eebde5c761cfd743132d4f213.1425040940.git.daniel@iogearbox.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-28 10:41:59 +01:00
Linus Torvalds eb64c3c6cd xen: additional features for 3.19-rc0
- Linear p2m for x86 PV guests which simplifies the p2m code, improves
   performance and will allow for > 512 GB PV guests in the future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJUjx7OAAoJEFxbo/MsZsTRXLIH/ishF/xDCL6F5r0I0SKDuaz5
 C/BediDcFzbzh4/t3x2PrPooHk4gPmeyIg688ZGgBAxHRXC5OJ2U5tdtZ/qUCnwf
 0J1pdp/yoAOVRJT+Sax10lN4+G8YV7+6Ptikz0C7glXBAg8SgFL3Y6tfBS0jNwYR
 wQph09S9n7gMZTodSBLbb0ymtJMhl16DrETJsYV73sU7bAL5sFDVkMQvY3SxkusX
 GNFeALfqM0cSK9mDI6O9avGJKoIdKlzt7VWHdlc+yKTlQsoyg/cSH3AaihhG6af9
 IElRxwH9Z40VFLKip0gNMOIrUwAjFGSw6N+Uhik27tlmvfI3Dll/+gsMz/5sHc8=
 =OyoK
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull additional xen update from David Vrabel:
 "Xen: additional features for 3.19-rc0

   - Linear p2m for x86 PV guests which simplifies the p2m code,
     improves performance and will allow for > 512 GB PV guests in the
     future.

  A last-minute, configuration specific issue was discovered with this
  change which is why it was not included in my previous pull request.
  This is now been fixed and tested"

* tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: switch to post-init routines in xen mmu.c earlier
  Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
  xen: annotate xen_set_identity_and_remap_chunk() with __init
  xen: introduce helper functions to do safe read and write accesses
  xen: Speed up set_phys_to_machine() by using read-only mappings
  xen: switch to linear virtual mapped sparse p2m list
  xen: Hide get_phys_to_machine() to be able to tune common path
  x86: Introduce function to get pmd entry pointer
  xen: Delay invalidating extra memory
  xen: Delay m2p_override initialization
  xen: Delay remapping memory of pv-domain
  xen: use common page allocation function in p2m.c
  xen: Make functions static
  xen: fix some style issues in p2m.c
2014-12-16 13:23:03 -08:00
Joonsoo Kim 031bc5743f mm/debug-pagealloc: make debug-pagealloc boottime configurable
Now, we have prepared to avoid using debug-pagealloc in boottime.  So
introduce new kernel-parameter to disable debug-pagealloc in boottime, and
makes related functions to be disabled in this case.

Only non-intuitive part is change of guard page functions.  Because guard
page is effective only if debug-pagealloc is enabled, turning off
according to debug-pagealloc is reasonable thing to do.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:48 -08:00
Linus Torvalds a023748d53 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm tree changes from Ingo Molnar:
 "The biggest change is full PAT support from Jürgen Gross:

     The x86 architecture offers via the PAT (Page Attribute Table) a
     way to specify different caching modes in page table entries.  The
     PAT MSR contains 8 entries each specifying one of 6 possible cache
     modes.  A pte references one of those entries via 3 bits:
     _PAGE_PAT, _PAGE_PWT and _PAGE_PCD.

     The Linux kernel currently supports only 4 different cache modes.
     The PAT MSR is set up in a way that the setting of _PAGE_PAT in a
     pte doesn't matter: the top 4 entries in the PAT MSR are the same
     as the 4 lower entries.

     This results in the kernel not supporting e.g. write-through mode.
     Especially this cache mode would speed up drivers of video cards
     which now have to use uncached accesses.

     OTOH some old processors (Pentium) don't support PAT correctly and
     the Xen hypervisor has been using a different PAT MSR configuration
     for some time now and can't change that as this setting is part of
     the ABI.

     This patch set abstracts the cache mode from the pte and introduces
     tables to translate between cache mode and pte bits (the default
     cache mode "write back" is hard-wired to PAT entry 0).  The tables
     are statically initialized with values being compatible to old
     processors and current usage.  As soon as the PAT MSR is changed
     (or - in case of Xen - is read at boot time) the tables are changed
     accordingly.  Requests of mappings with special cache modes are
     always possible now, in case they are not supported there will be a
     fallback to a compatible but slower mode.

     Summing it up, this patch set adds the following features:

      - capability to support WT and WP cache modes on processors with
        full PAT support

      - processors with no or uncorrect PAT support are still working as
        today, even if WT or WP cache mode are selected by drivers for
        some pages

      - reduction of Xen special handling regarding cache mode

  Another change is a boot speedup on ridiculously large RAM systems,
  plus other smaller fixes"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86: mm: Move PAT only functions to mm/pat.c
  xen: Support Xen pv-domains using PAT
  x86: Enable PAT to use cache mode translation tables
  x86: Respect PAT bit when copying pte values between large and normal pages
  x86: Support PAT bit in pagetable dump for lower levels
  x86: Clean up pgtable_types.h
  x86: Use new cache mode type in memtype related functions
  x86: Use new cache mode type in mm/ioremap.c
  x86: Use new cache mode type in setting page attributes
  x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c
  x86: Use new cache mode type in track_pfn_remap() and track_pfn_insert()
  x86: Use new cache mode type in mm/iomap_32.c
  x86: Use new cache mode type in asm/pgtable.h
  x86: Use new cache mode type in arch/x86/mm/init_64.c
  x86: Use new cache mode type in arch/x86/pci
  x86: Use new cache mode type in drivers/video/fbdev/vermilion
  x86: Use new cache mode type in drivers/video/fbdev/gbefb.c
  x86: Use new cache mode type in include/asm/fb.h
  x86: Make page cache mode a real type
  x86: mm: Use 2GB memory block size on large-memory x86-64 systems
  ...
2014-12-10 13:59:34 -08:00
Juergen Gross 792230c3a6 x86: Introduce function to get pmd entry pointer
Introduces lookup_pmd_address() to get the address of the pmd entry
related to a virtual address in the current address space. This
function is needed for support of a virtual mapped sparse p2m list
in xen pv domains, as we need the address of the pmd entry, not the
one of the pte in that case.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:09:04 +00:00
Juergen Gross f5b2831d65 x86: Respect PAT bit when copying pte values between large and normal pages
The PAT bit in the ptes is not moved to the correct position when
copying page protection attributes between entries of different sized
pages. Translate the ptes according to their page size.

Based-on-patch-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com
Cc: ville.syrjala@linux.intel.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-17-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-16 11:04:26 +01:00
Juergen Gross e00c8cc93c x86: Use new cache mode type in memtype related functions
Instead of directly using the cache mode bits in the pte switch to
using the cache mode type.

Based-on-patch-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com
Cc: ville.syrjala@linux.intel.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-14-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-16 11:04:26 +01:00
Juergen Gross c06814d841 x86: Use new cache mode type in setting page attributes
Instead of directly using the cache mode bits in the pte switch to
using the cache mode type in the functions for modifying page
attributes.

Based-on-patch-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com
Cc: ville.syrjala@linux.intel.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-12-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-16 11:04:25 +01:00
Juergen Gross 102e19e195 x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c
When modifying page attributes via change_page_attr_set_clr() don't
test for setting _PAGE_PAT_LARGE, as this is
- never done
- PAT support for large pages is not included in the kernel up to now

Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com
Cc: ville.syrjala@linux.intel.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-11-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-16 11:04:25 +01:00
Dexuan Cui d1cd121083 x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE
pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long <<
PAGE_SHIFT" will overflow for PFNs above 4GB.

Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V,
with 5GB memory assigned, can't load the netvsc driver successfully and
hence the synthetic network device can't work (we can use the kernel parameter
mem=3000M to work around the issue).

Cast pte_pfn() to phys_addr_t before shifting.

Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()"
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: linux-mm@kvack.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: dave.hansen@intel.com
Cc: riel@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-29 10:57:21 +01:00
Linus Torvalds 7cc3afdf43 Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI changes from Ingo Molnar:
 "The main changes:

  - Add debug code to the dump EFI pagetable - Borislav Petkov

  - Make 1:1 runtime mapping robust when booting on machines with lots
    of memory - Borislav Petkov

  - Move the EFI facilities bits out of 'x86_efi_facility' and into
    efi.flags which is the standard architecture independent place to
    keep EFI state, by Matt Fleming.

  - Add 'EFI mixed mode' support: this allows 64-bit kernels to be
    booted from 32-bit firmware.  This needs a bootloader that supports
    the 'EFI handover protocol'.  By Matt Fleming"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86, efi: Abstract x86 efi_early calls
  x86/efi: Restore 'attr' argument to query_variable_info()
  x86/efi: Rip out phys_efi_get_time()
  x86/efi: Preserve segment registers in mixed mode
  x86/boot: Fix non-EFI build
  x86, tools: Fix up compiler warnings
  x86/efi: Re-disable interrupts after calling firmware services
  x86/boot: Don't overwrite cr4 when enabling PAE
  x86/efi: Wire up CONFIG_EFI_MIXED
  x86/efi: Add mixed runtime services support
  x86/efi: Firmware agnostic handover entry points
  x86/efi: Split the boot stub into 32/64 code paths
  x86/efi: Add early thunk code to go from 64-bit to 32-bit
  x86/efi: Build our own EFI services pointer table
  efi: Add separate 32-bit/64-bit definitions
  x86/efi: Delete dead code when checking for non-native
  x86/mm/pageattr: Always dump the right page table in an oops
  x86, tools: Consolidate #ifdef code
  x86/boot: Cleanup header.S by removing some #ifdefs
  efi: Use NULL instead of 0 for pointer
  ...
2014-03-31 12:26:05 -07:00
Linus Torvalds 918d80a136 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu handling changes from Ingo Molnar:
 "Bigger changes:

   - Intel CPU hardware-enablement: new vector instructions support
     (AVX-512), by Fenghua Yu.

   - Support the clflushopt instruction and use it in appropriate
     places.  clflushopt is similar to clflush but with more relaxed
     ordering, by Ross Zwisler.

   - MSR accessor cleanups, by Borislav Petkov.

   - 'forcepae' boot flag for those who have way too much time to spend
     on way too old Pentium-M systems and want to live way too
     dangerously, by Chris Bainbridge"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Add forcepae parameter for booting PAE kernels on PAE-disabled Pentium M
  Rename TAINT_UNSAFE_SMP to TAINT_CPU_OUT_OF_SPEC
  x86, intel: Make MSR_IA32_MISC_ENABLE bit constants systematic
  x86, Intel: Convert to the new bit access MSR accessors
  x86, AMD: Convert to the new bit access MSR accessors
  x86: Add another set of MSR accessor functions
  x86: Use clflushopt in drm_clflush_virt_range
  x86: Use clflushopt in drm_clflush_page
  x86: Use clflushopt in clflush_cache_range
  x86: Add support for the clflushopt instruction
  x86, AVX-512: Enable AVX-512 States Context Switch
  x86, AVX-512: AVX-512 Feature Detection
2014-03-31 12:00:45 -07:00
Borislav Petkov b82ad3d394 x86, pageattr: Correct WBINVD spelling in comment
It is WBINVD, for INValiDate and not "wbindv". Use caps for instruction
names, while at it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1394633584-5509-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-13 15:32:45 -07:00
Matt Fleming 994448f1af Merge remote-tracking branch 'tip/x86/efi-mixed' into efi-for-mingo
Conflicts:
	arch/x86/kernel/setup.c
	arch/x86/platform/efi/efi.c
	arch/x86/platform/efi/efi_64.c
2014-03-05 18:15:37 +00:00
Matt Fleming 426e34cc4f x86/mm/pageattr: Always dump the right page table in an oops
Now that we have EFI-specific page tables we need to lookup the pgd when
dumping those page tables, rather than assuming that swapper_pgdir is
the current pgdir.

Remove the double underscore prefix, which is usually reserved for
static functions.

Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-03-04 21:23:36 +00:00
Borislav Petkov 42a5477251 x86, pageattr: Export page unmapping interface
We will use it in efi so expose it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-03-04 16:17:17 +00:00
Ross Zwisler 8b80fd8b45 x86: Use clflushopt in clflush_cache_range
If clflushopt is available on the system, use it instead of clflush in
clflush_cache_range.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Link: http://lkml.kernel.org/r/1393441612-19729-3-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-27 08:26:10 -08:00
Borislav Petkov 82f0712ca0 x86/mm/cpa: Map in an arbitrary pgd
Add the ability to map pages in an arbitrary pgd. This wires in the
remaining stuff so that there's a new interface with which you can map a
region into an arbitrary PGD.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:35 +00:00
Borislav Petkov 52a628fb45 x86/mm/pageattr: Add last levels of error path
We try to free the pagetable pages once we've unmapped our portion.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:31 +00:00
Borislav Petkov 0bb8aeee7b x86/mm/pageattr: Add a PUD error unwinding path
In case we encounter an error during the mapping of a region, we want to
unwind what we've established so far exactly the way we did the mapping.
This is the PUD part kept deliberately small for easier review.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:28 +00:00
Borislav Petkov c6b6f363f7 x86/mm/pageattr: Add a PTE pagetable populating function
Handle last level by unconditionally writing the PTEs into the PTE page
while paying attention to the NX bit.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:24 +00:00
Borislav Petkov f900a4b8ab x86/mm/pageattr: Add a PMD pagetable populating function
Handle PMD-level mappings the same as PUD ones.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:20 +00:00
Borislav Petkov 4b23538d88 x86/mm/pageattr: Add a PUD pagetable populating function
Add the next level of the pagetable populating function, we handle
chunks around a 1G boundary by mapping them with the lower level
functions - otherwise we use 1G pages for the mappings, thus using as
less amount of pagetable pages as possible.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:17 +00:00
Borislav Petkov f3f729661e x86/mm/pageattr: Add a PGD pagetable populating function
This allocates, if necessary, and populates the corresponding PGD entry
with a PUD page. The next population level is a dummy macro which will
be removed by the next patch and it is added here to keep the patch
small and easily reviewable but not break bisection, at the same time.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:12 +00:00
Borislav Petkov 0fd64c23fd x86/mm/pageattr: Lookup address in an arbitrary PGD
This is preparatory work in order to be able to map pages into a
specified PGD and not implicitly and only into init_mm.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-02 11:09:08 +00:00
Linus Torvalds f9b3bcfbc4 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
 "Misc smaller changes all over the map"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu/dmar: Remove warning for HPET scope type
  x86/mm/gart: Drop unnecessary check
  x86/mm/hotplug: Put kernel_physical_mapping_remove() declaration in CONFIG_MEMORY_HOTREMOVE
  x86/mm/fixmap: Remove unused FIX_CYCLONE_TIMER
  x86/mm/numa: Simplify some bit mangling
  x86/mm: Re-enable DEBUG_TLBFLUSH for X86_32
  x86/mm/cpa: Cleanup split_large_page() and its callee
  x86: Drop always empty .text..page_aligned section
2013-04-30 08:40:35 -07:00
Boris Ostrovsky 26564600c9 x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
When CONFIG_DEBUG_PAGEALLOC is set page table updates made by
kernel_map_pages() are not made visible (via TLB flush)
immediately if lazy MMU is on. In environments that support lazy
MMU (e.g. Xen) this may lead to fatal page faults, for example,
when zap_pte_range() needs to allocate pages in
__tlb_remove_page() -> tlb_next_batch().

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: konrad.wilk@oracle.com
Link: http://lkml.kernel.org/r/1365703192-2089-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-12 07:19:19 +02:00
Andrea Arcangeli f76cfa3c24 x86/mm/cpa: Convert noop to functional fix
Commit:

  a8aed3e075 ("x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge")

introduced a valid fix but one location that didn't trigger the bug that
lead to finding those (small) problems, wasn't updated using the
right variable.

The wrong variable was also initialized for no good reason, that
may have been the source of the confusion. Remove the noop
initialization accordingly.

Commit a8aed3e075 also erroneously removed one canon_pgprot pass meant
to clear pmd bitflags not supported in hardware by older CPUs, that
automatically gets corrected by this patch too by applying it to the right
variable in the new location.

Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/1365600505-19314-1-git-send-email-aarcange@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-11 10:34:42 +02:00
Borislav Petkov 5952886bfe x86/mm/cpa: Cleanup split_large_page() and its callee
So basically we're generating the pte_t * from a struct page and
we're handing it down to the __split_large_page() internal version
which then goes and gets back struct page * from it because it
needs it.

Change the caller to hand down struct page * directly and the
callee can compute the pte_t itself.

Net save is one virt_to_page() call and simpler code. While at
it, make __split_large_page() static.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1363886217-24703-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-10 14:39:08 +02:00
Linus Torvalds 2003cd90c4 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge
  Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit"
  x86/mm/numa: Don't check if node is NUMA_NO_NODE
  x86, efi: Make "noefi" really disable EFI runtime serivces
  x86/apic: Fix parsing of the 'lapic' cmdline option
2013-02-26 19:45:29 -08:00
Andrea Arcangeli a8aed3e075 x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge
Without this patch any kernel code that reads kernel memory in
non present kernel pte/pmds (as set by pageattr.c) will crash.

With this kernel code:

static struct page *crash_page;
static unsigned long *crash_address;
[..]
	crash_page = alloc_pages(GFP_KERNEL, 9);
	crash_address = page_address(crash_page);
	if (set_memory_np((unsigned long)crash_address, 1))
		printk("set_memory_np failure\n");
[..]

The kernel will crash if inside the "crash tool" one would try
to read the memory at the not present address.

crash> p crash_address
crash_address = $8 = (long unsigned int *) 0xffff88023c000000
crash> rd 0xffff88023c000000
[ *lockup* ]

The lockup happens because _PAGE_GLOBAL and _PAGE_PROTNONE
shares the same bit, and pageattr leaves _PAGE_GLOBAL set on a
kernel pte which is then mistaken as _PAGE_PROTNONE (so
pte_present returns true by mistake and the kernel fault then
gets confused and loops).

With THP the same can happen after we taught pmd_present to
check _PAGE_PROTNONE and _PAGE_PSE in commit
027ef6c878 ("mm: thp: fix pmd_present for
split_huge_page and PROT_NONE with THP").  THP has the same
problem with _PAGE_GLOBAL as the 4k pages, but it also has a
problem with _PAGE_PSE, which must be cleared too.

After the patch is applied copy_user correctly returns -EFAULT
and doesn't lockup anymore.

crash> p crash_address
crash_address = $9 = (long unsigned int *) 0xffff88023c000000
crash> rd 0xffff88023c000000
rd: read error: kernel virtual address: ffff88023c000000  type:
"64-bit KVADDR"

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-24 13:01:45 +01:00
Wen Congyang ae9aae9eda memory-hotplug: common APIs to support page tables hot-remove
When memory is removed, the corresponding pagetables should alse be
removed.  This patch introduces some common APIs to support vmemmap
pagetable and x86_64 architecture direct mapping pagetable removing.

All pages of virtual mapping in removed memory cannot be freed if some
pages used as PGD/PUD include not only removed memory but also other
memory.  So this patch uses the following way to check whether a page
can be freed or not.

1) When removing memory, the page structs of the removed memory are
   filled with 0FD.

2) All page structs are filled with 0xFD on PT/PMD, PT/PMD can be
   cleared.  In this case, the page used as PT/PMD can be freed.

For direct mapping pages, update direct_pages_count[level] when we freed
their pagetables.  And do not free the pages again because they were
freed when offlining.

For vmemmap pages, free the pages and their pagetables.

For larger pages, do not split them into smaller ones because there is
no way to know if the larger page has been split.  As a result, there is
no way to decide when to split.  We deal the larger pages in the
following way:

1) For direct mapped pages, all the pages were freed when they were
   offlined.  And since menmory offline is done section by section, all
   the memory ranges being removed are aligned to PAGE_SIZE.  So only need
   to deal with unaligned pages when freeing vmemmap pages.

2) For vmemmap pages being used to store page_struct, if part of the
   larger page is still in use, just fill the unused part with 0xFD.  And
   when the whole page is fulfilled with 0xFD, then free the larger page.

[akpm@linux-foundation.org: fix typo in comment]
[tangchen@cn.fujitsu.com: do not calculate direct mapping pages when freeing vmemmap pagetables]
[tangchen@cn.fujitsu.com: do not free direct mapping pages twice]
[tangchen@cn.fujitsu.com: do not free page split from hugepage one by one]
[tangchen@cn.fujitsu.com: do not split pages when freeing pagetable pages]
[akpm@linux-foundation.org: use pmd_page_vaddr()]
[akpm@linux-foundation.org: fix used-uninitialised bug]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:12 -08:00
H. Peter Anvin 68d00bbebb Merge remote-tracking branch 'origin/x86/mm' into x86/mm2
Explicitly merging these two branches due to nontrivial conflicts and
to allow further work.

Resolved Conflicts:
	arch/x86/kernel/head32.c
	arch/x86/kernel/head64.c
	arch/x86/mm/init_64.c
	arch/x86/realmode/init.c

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-01 02:28:36 -08:00
Dave Hansen d765653445 x86, mm: Create slow_virt_to_phys()
This is necessary because __pa() does not work on some kinds of
memory, like vmalloc() or the alloc_remap() areas on 32-bit
NUMA systems.  We have some functions to do conversions _like_
this in the vmalloc() code (like vmalloc_to_page()), but they
do not work on sizes other than 4k pages.  We would potentially
need to be able to handle all the page sizes that we use for
the kernel linear mapping (4k, 2M, 1G).

In practice, on 32-bit NUMA systems, the percpu areas get stuck
in the alloc_remap() area.  Any __pa() call on them will break
and basically return garbage.

This patch introduces a new function slow_virt_to_phys(), which
walks the kernel page tables on x86 and should do precisely
the same logical thing as __pa(), but actually work on a wider
range of memory.  It should work on the normal linear mapping,
vmalloc(), kmap(), etc...

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212433.4D1FCA62@kernel.stglabs.ibm.com
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 16:33:23 -08:00
Dave Hansen f3c4fbb68e x86, mm: Use new pagetable helpers in try_preserve_large_page()
try_preserve_large_page() can be slightly simplified by using
the new page_level_*() helpers.  This also moves the 'level'
over to the new pg_level enum type.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20130122212432.14F3D993@kernel.stglabs.ibm.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 16:33:23 -08:00
Linus Torvalds 11520e5e7c Revert "x86-64/efi: Use EFI to deal with platform wall clock (again)"
This reverts commit bd52276fa1 ("x86-64/efi: Use EFI to deal with
platform wall clock (again)"), and the two supporting commits:

  da5a108d05b4: "x86/kernel: remove tboot 1:1 page table creation code"

  185034e72d59: "x86, efi: 1:1 pagetable mapping for virtual EFI calls")

as they all depend semantically on commit 53b87cf088 ("x86, mm:
Include the entire kernel memory map in trampoline_pgd") that got
reverted earlier due to the problems it caused.

This was pointed out by Yinghai Lu, and verified by me on my Macbook Air
that uses EFI.

Pointed-out-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-15 15:20:41 -08:00
Yinghai Lu 8eb5779f6b x86, mm: use pfn_range_is_mapped() with CPA
We are going to map ram only, so under max_low_pfn_mapped,
between 4g and max_pfn_mapped does not mean mapped at all.

Use pfn_range_is_mapped() directly.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-13-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:59:09 -08:00
Alexander Duyck fc8d782677 x86: Use __pa_symbol instead of __pa on C visible symbols
When I made an attempt at separating __pa_symbol and __pa I found that there
were a number of cases where __pa was used on an obvious symbol.

I also caught one non-obvious case as _brk_start and _brk_end are based on the
address of __brk_base which is a C visible symbol.

In mark_rodata_ro I was able to reduce the overhead of kernel symbol to
virtual memory translation by using a combination of __va(__pa_symbol())
instead of page_address(virt_to_page()).

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215640.8521.80483.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-16 16:42:09 -08:00
Jan Beulich bd52276fa1 x86-64/efi: Use EFI to deal with platform wall clock (again)
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

History:

    This commit was originally merged as bacef661ac ("x86-64/efi:
    Use EFI to deal with platform wall clock") but it resulted in some
    ASUS machines no longer booting due to a firmware bug, and so was
    reverted in f026cfa82f. A pre-emptive fix for the buggy ASUS
    firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
    mapping for virtual EFI calls") so now this patch can be
    reapplied.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]
2012-10-30 10:39:20 +00:00