The new vlan+srcmac xmit policy is not implementable with XDP since
in many cases the 802.1Q payload is not present in the packet. This
can be for example due to hardware offload or in the case of veth
due to use of skbuffs internally.
This also fixes the NULL deref with the vlan+srcmac xmit policy
reported by Jonathan Toppins by additionally checking the skb
pointer.
Fixes: a815bde56b ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff")
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20210812145241.12449-1-joamaki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
can and ieee802154.
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid
dma mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans
on idle systems to prevent frequent wake ups
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hzDl
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, bpf, can and
ieee802154.
The size of this is pretty normal, but we got more fixes for 5.14
changes this week than last week. Nothing major but the trend is the
opposite of what we like. We'll see how the next week goes..
Current release - regressions:
- r8169: fix ASPM-related link-up regressions
- bridge: fix flags interpretation for extern learn fdb entries
- phy: micrel: fix link detection on ksz87xx switch
- Revert "tipc: Return the correct errno code"
- ptp: fix possible memory leak caused by invalid cast
Current release - new code bugs:
- bpf: add missing bpf_read_[un]lock_trace() for syscall program
- bpf: fix potentially incorrect results with bpf_get_local_storage()
- page_pool: mask the page->signature before the checking, avoid dma
mapping leaks
- netfilter: nfnetlink_hook: 5 fixes to information in netlink dumps
- bnxt_en: fix firmware interface issues with PTP
- mlx5: Bridge, fix ageing time
Previous releases - regressions:
- linkwatch: fix failure to restore device state across
suspend/resume
- bareudp: fix invalid read beyond skb's linear data
Previous releases - always broken:
- bpf: fix integer overflow involving bucket_size
- ppp: fix issues when desired interface name is specified via
netlink
- wwan: mhi_wwan_ctrl: fix possible deadlock
- dsa: microchip: ksz8795: fix number of VLAN related bugs
- dsa: drivers: fix broken backpressure in .port_fdb_dump
- dsa: qca: ar9331: make proper initial port defaults
Misc:
- bpf: add lockdown check for probe_write_user helper
- netfilter: conntrack: remove offload_pickup sysctl before 5.14 is
out
- netfilter: conntrack: collect all entries in one cycle,
heuristically slow down garbage collection scans on idle systems to
prevent frequent wake ups"
* tag 'net-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
vsock/virtio: avoid potential deadlock when vsock device remove
wwan: core: Avoid returning NULL from wwan_create_dev()
net: dsa: sja1105: unregister the MDIO buses during teardown
Revert "tipc: Return the correct errno code"
net: mscc: Fix non-GPL export of regmap APIs
net: igmp: increase size of mr_ifc_count
MAINTAINERS: switch to my OMP email for Renesas Ethernet drivers
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packets
net: pcs: xpcs: fix error handling on failed to allocate memory
net: linkwatch: fix failure to restore device state across suspend/resume
net: bridge: fix memleak in br_add_if()
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge
net: bridge: fix flags interpretation for extern learn fdb entries
net: dsa: sja1105: fix broken backpressure in .port_fdb_dump
net: dsa: lantiq: fix broken backpressure in .port_fdb_dump
net: dsa: lan9303: fix broken backpressure in .port_fdb_dump
net: dsa: hellcreek: fix broken backpressure in .port_fdb_dump
bpf, core: Fix kernel-doc notation
net: igmp: fix data-race in igmp_ifc_timer_expire()
net: Fix memory leak in ieee802154_raw_deliver
...
and a reference handling fix from Jeff that should address some memory
corruption reports in the snaprealm area. Both marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmEVaqsTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi/DBCACd7+mnAXIwajwoDdXFIJT7/tfimdvU
cMrh6ciZNtEKxm23flQ1AFJXlXR/nlZRspfOmlmsl9bB4TAlXnhJ/s4JaiuOMMTh
OQ4oz0vAbGELkPsXB/FXGSSk1wTFEjCocFsJwoYiUkYjD7Qt12BZKNkFYgj/MVc2
wyJ5K1buqBLVFDU+CymqDzc07YpG1zn888o7UGWFTyevldRAHl2euxqbnr0S4qb9
OS5UKO3aFCEt5PT9RKRHygCGjuHym/fgXgPm9aNY4rYBE9qOXloVUOD5bhMHBJ2E
g506xhOurqbGv4O9oj+gvBwtQwY/TF8BvCA79koQSHNIYQsC/bcXenST
=m8x8
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to avoid a soft lockup in ceph_check_delayed_caps() from Luis
and a reference handling fix from Jeff that should address some memory
corruption reports in the snaprealm area.
Both marked for stable"
* tag 'ceph-for-5.14-rc6' of git://github.com/ceph/ceph-client:
ceph: take snap_empty_lock atomically with snaprealm refcount change
ceph: reduce contention in ceph_check_delayed_caps()
amdgpu:
- Yellow carp update
- RAS EEPROM fixes
- BACO/BOCO fixes
- Fix a memory leak in an error path
- Freesync fix
- VCN harvesting fix
- Display fixes
i915:
- GVT fix for Windows VM hang.
- Display fix of 12 BPC bits for display 12 and newer.
- Don't try to access some media register for fused off domains.
- Fix kerneldoc build warnings.
mediatek:
- Fix dpi bridge bug.
- Fix cursor plane no update.
meson:
- Fix colors when booting with HDR
-----BEGIN PGP SIGNATURE-----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=w0XU
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Another week, another set of pretty regular fixes, nothing really
stands out too much.
amdgpu:
- Yellow carp update
- RAS EEPROM fixes
- BACO/BOCO fixes
- Fix a memory leak in an error path
- Freesync fix
- VCN harvesting fix
- Display fixes
i915:
- GVT fix for Windows VM hang.
- Display fix of 12 BPC bits for display 12 and newer.
- Don't try to access some media register for fused off domains.
- Fix kerneldoc build warnings.
mediatek:
- Fix dpi bridge bug.
- Fix cursor plane no update.
meson:
- Fix colors when booting with HDR"
* tag 'drm-fixes-2021-08-13' of git://anongit.freedesktop.org/drm/drm:
drm/doc/rfc: drop lmem uapi section
drm/i915: Only access SFC_DONE when media domain is not fused off
drm/i915/display: Fix the 12 BPC bits for PIPE_MISC reg
drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_work
drm/amd/display: Remove invalid assert for ODM + MPC case
drm/amd/pm: bug fix for the runtime pm BACO
drm/amdgpu: handle VCN instances when harvesting (v2)
drm/meson: fix colour distortion from HDR set during vendor u-boot
drm/i915/gvt: Fix cached atomics setting for Windows VM
drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'
drm/amdgpu: don't enable baco on boco platforms in runpm
drm/amdgpu: set RAS EEPROM address from VBIOS
drm/amd/pm: update smu v13.0.1 firmware header
drm/mediatek: Fix cursor plane no update
drm/mediatek: mtk-dpi: Set out_fmt from config if not the last bridge
drm/mediatek: dpi: Fix NULL dereference in mtk_dpi_bridge_atomic_check
On some newer SoCs, the interconnect between IPA and SoC internal
memory (imem) is not used. Update the binding to indicate that
having just the memory and config interconnects is another allowed
configuration.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210811141802.2635424-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It isn't required, but all callers of ipa_aggr_granularity_val()
pass a constant value (IPA_AGGR_GRANULARITY) as the usec argument.
Two of those callers are in ipa_validate_build(), with the result
being passed to BUILD_BUG_ON().
Evidently the "sparc64-linux-gcc" compiler (at least) doesn't always
inline ipa_aggr_granularity_val(), so the result of the function is
not constant at compile time, and that leads to build errors.
Define the function with the __always_inline attribute to avoid the
errors. We can see by inspection that the value passed is never
zero, so we can just remove its WARN_ON() call.
Fixes: 5bc5588466 ("net: ipa: use WARN_ON() rather than assertions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210811135948.2634264-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* meson: Fix colors when booting with HDR
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmEU27UACgkQaA3BHVML
eiMABwf+Kuvyh6mXHewMwqRNnxYFwyyhy5AVJm17Z74pZcbxSWp2+WBxDTaugCRX
Dl5Yt27DsCCW0JFpZ0w4xITizUxhD/VKnVUONBB1HK1s92h7WxG+2SQEPQ7uHQj5
iBbaysCn5uIJhpDnTXcqos0wnLMxkquZ5ZK6uQwPD+Q8VsAwMVw0dZ1C/Kkmo9zF
55VUATGIGBtOI4FEDJfDZGukVfbDt28ipMNeyCiqfzREnDeIyojJ/KEbSD3XHhi7
HMDkeAM5SHToNaBEIaEikPWKSSa/b5P3y9U/yT6d4MZ1PH/lr1he4SQnThcTRCg8
+vnMC1iJiwgdX7gQ2StHBoB1GMqv1Q==
=NuGL
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-08-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* meson: Fix colors when booting with HDR
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YRTb+qUuBYWjJDVg@linux-uq9g.fritz.box
- Display fix of 12 BPC bits for display 12 and newer.
- Don't try to access some media register for fused off domains.
- Fix kerneldoc build warnings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmEVP3QACgkQ+mJfZA7r
E8qGKQgApmIuFnhFspZ2BMsbhxOckZW7mxg+4RzNbIZ/pb+2aO8CnkfemrYZgFX/
OaZtvJdqtbbkN25glZTeP7wuV//uXSkPdr7zTqaL+005U0PL+EUzlfYZR4AzdhI2
D2AMEDfVwwbMrB/hI8sk01XKmEXFfBkX3Acy9svLqi2TOvFCqjnBcV/E5K+eklDs
lY5KoklziRKw2FpckOdKYPiyjWbTC02s7Co4QXdkkSoZm69HDGuBlchH2JNyDrer
Dyarp5btGzkVMZy5q9avIsBgFE1RRVCEnGLaSzMi1qtNaorCTYs5FJtp48yFfmzi
O1X6XOGYDS4nGl782sfxjkOaUNOdbQ==
=vN7o
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2021-08-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- GVT fix for Windows VM hang.
- Display fix of 12 BPC bits for display 12 and newer.
- Don't try to access some media register for fused off domains.
- Fix kerneldoc build warnings.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YRU/hnQ1sNr+j37x@intel.com
Stefan Schmidt says:
====================
ieee802154 for net 2021-08-12
Mostly fixes coming from bot reports. Dongliang Mu tackled some syzkaller
reports in hwsim again and Takeshi Misawa a memory leak in ieee802154 raw.
* tag 'ieee802154-for-davem-2021-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net: Fix memory leak in ieee802154_raw_deliver
ieee802154: hwsim: fix GPF in hwsim_new_edge_nl
ieee802154: hwsim: fix GPF in hwsim_set_edge_lqi
====================
Link: https://lore.kernel.org/r/20210812183912.1663996-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a potential deadlock case when remove the vsock device or
process the RESET event:
vsock_for_each_connected_socket:
spin_lock_bh(&vsock_table_lock) ----------- (1)
...
virtio_vsock_reset_sock:
lock_sock(sk) --------------------- (2)
...
spin_unlock_bh(&vsock_table_lock)
lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".
Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
Call trace:
queued_spin_lock_slowpath
vsock_remove_bound
vsock_remove_sock
virtio_transport_release
__vsock_release
vsock_release
__sock_release
sock_close
__fput
____fput
So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.
Fixes: 0ea9e1d3a9 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ucounts fix from Eric Biederman:
"This fixes the ucount sysctls on big endian architectures.
The counts were expanded to be longs instead of ints, and the sysctl
code was overlooked, so only the low 32bit were being processed. On
litte endian just processing the low 32bits is fine, but on 64bit big
endian processing just the low 32bits results in the high order bits
instead of the low order bits being processed and nothing works
proper.
This change took a little bit to mature as we have the SYSCTL_ZERO,
and SYSCTL_INT_MAX macros that are only usable for sysctls operating
on ints, but unfortunately are not obviously broken. Which resulted in
the versions of this change working on big endian and not on little
endian, because the int SYSCTL_ZERO when extended 64bit wound up being
0x100000000. So we only allowed values greater than 0x100000000 and
less than 0faff. Which unfortunately broken everything that tried to
set the sysctls. (First reported with the windows subsystem for
linux).
I have tested this on x86_64 64bit after first reproducing the
problems with the earlier version of this change, and then verifying
the problems do not exist when we use appropriate long min and max
values for extra1 and extra2"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: add missing data type changes
Make wwan_create_dev() to return either valid or error pointer,
In some cases it may return NULL. Prevent this by converting
it to the respective error pointer.
Fixes: 9a44c1cc63 ("net: Add a WWAN subsystem")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20210811124845.10955-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Misc. cleanup for mlx5.
1) Typos and use of netdev_warn()
2) smatch cleanup
3) Minor fix to inner TTC table creation
4) Dynamic capability cache allocation
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmEUE4oACgkQSD+KveBX
+j7EsAf/W8hfoRYNeqf+xGwkOOUzMvSK8gNPD7f02yniqQ4MmC++v7Fg4M162uvG
d87EoCNjbGLqhAe/4W8Euis+4/s6o3EAjjjdck5B/ZKEoyY/W6PJYJPDNL358yaK
DsKw6oZrs02enrRbQN5/WzEjfaDSpKboD5eYqsl+g4YWu0wJt5bsDb5qj7UlGqee
FIIqLeKgsbqWmpQxpBRb6jzKLB0LxN1Kk2ymy7tyq+CCEWUvtlAY+509pWn/MOyX
G0rCg1Pz125ZvganFZaEDK4bKy2yAu0FmKv6CoC/LkNdLVWCRuQ1n1zR2B8Tt85U
SXEcRzenTSpDQ9X4a78dB5wpdG5Y3w==
=8u8S
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 updates 2021-08-11
This series provides misc updates to mlx5.
For more information please see tag log below.
Please pull and let me know if there is any problem.
mlx5-updates-2021-08-11
Misc. cleanup for mlx5.
1) Typos and use of netdev_warn()
2) smatch cleanup
3) Minor fix to inner TTC table creation
4) Dynamic capability cache allocation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Improvements to the DSA tag_8021q cross-chip notifiers
This series improves cross-chip notifier error messages and addresses a
benign error message seen during reboot on a system with disjoint DSA
trees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, on my board with multiple sja1105 switches in disjoint trees
described in commit f66a6a69f9 ("net: dsa: permit cross-chip bridging
between all trees in the system"), rebooting the board triggers the
following benign warnings:
[ 12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT
[ 12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT
[ 12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT
[ 12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT
[ 12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT
[ 12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT
Basically switch 1 calls dsa_tag_8021q_unregister, and switch 1's TX and
RX VLANs cannot be found on switch 2's CPU port.
But why would switch 2 even attempt to delete switch 1's TX and RX
tag_8021q VLANs from its CPU port? Well, because we use dsa_broadcast,
and it is supposed that it had added those VLANs in the first place
(because in dsa_port_tag_8021q_vlan_match, all CPU ports match
regardless of their tree index or switch index).
The two trees probe asynchronously, and when switch 1 probed, it called
dsa_broadcast which did not notify the tree of switch 2, because that
didn't probe yet. But during unbind, switch 2's tree _is_ probed, so it
_is_ notified of the deletion.
Before jumping to introduce a synchronization mechanism between the
probing across disjoint switch trees, let's take a step back and see
whether we _need_ to do that in the first place.
The RX and TX VLANs of switch 1 would be needed on switch 2's CPU port
only if switch 1 and 2 were part of a cross-chip bridge. And
dsa_tag_8021q_bridge_join takes care precisely of that (but if probing
was synchronous, the bridge_join would just end up bumping the VLANs'
refcount, because they are already installed by the setup path).
Since by the time the ports are bridged, all DSA trees are already set
up, and we don't need the tag_8021q VLANs of one switch installed on the
other switches during probe time, the answer is that we don't need to
fix the synchronization issue.
So make the setup and teardown code paths call dsa_port_notify, which
notifies only the local tree, and the bridge code paths call
dsa_broadcast, which let the other trees know as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently this error message does not say a lot:
[ 32.693498] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[ 32.699725] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[ 32.705931] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[ 32.712139] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[ 32.718347] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
[ 32.724554] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT
but in this form, it is immediately obvious (at least to me) what the
problem is, even without further looking at the code:
[ 12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT
[ 12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT
[ 12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT
[ 12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT
[ 12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT
[ 12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We still have quite a bit more work to do with overall reworking of
the ttm-based dg1 code, but the uapi stuff is now finalized with the
latest pull. So remove that.
This also fixes kerneldoc build warnings because we've included the
same headers in two places, resulting in sphinx complaining about
duplicated symbols. This regression has been created when we moved the
uapi definitions to the real include/uapi/ folder in 727ecd99a4
("drm/doc/rfc: drop the i915_gem_lmem.h header")
v2: Fix a few references that I missed, the htmldocs build took
forever.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by Stephen Rothwell <sfr@canb.auug.org.au> (v1)
References: https://lore.kernel.org/dri-devel/20210603193242.1ce99344@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 727ecd99a4 ("drm/doc/rfc: drop the i915_gem_lmem.h header")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810142748.1983271-1-daniel.vetter@ffwll.ch
(cherry picked from commit dae2d28832)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6
forcewake domain and is not accessible if the vdbox in that domain is
fused off and the forcewake is not initialized.
This mistake went unnoticed because until recently we were using the
wrong register offset for the SFC_DONE register; once the register
offset was corrected, we started hitting errors like
<4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000
on parts with fused-off vdbox engines.
Fixes: e50dbdbfd9 ("drm/i915/tgl: Add SFC instdone to error state")
Fixes: 9c9c6d0ab0 ("drm/i915: Correct SFC_DONE register offset")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806174130.1058960-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit c5589bb5dc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Changed Fixes tag to match the cherry-picked 82929a2140]
ida_alloc_range() may return other than -ENOMEM error code.
Unshadow it in the wwan_create_port().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the
Dithering BPC, with valid values of 6, 8, 10 BPC.
For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid
values of: 6, 8, 10, 12 BPC, and need to be programmed whether
dithering is enabled or not.
This patch:
-corrects the bits 5-7 for PIPE MISC register for 12 BPC.
-renames the bits and mask to have generic names for these bits for
dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout
for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffe ("drm/i915/bdw: Broadwell has PIPEMISC")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 70418a6871)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The call to sja1105_mdiobus_unregister is present in the error path but
absent from the main driver unbind path.
Fixes: 5a8f09748e ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.
Remove the VLAN filtering check in mt7530_port_bridge_leave.
Fixes: 474a2ddaa1 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TJA1102 provides interrupt notification for the critical health states
like overtemperature and undervoltage.
The overtemperature bit is set if package temperature is beyond 155C°.
This functionality was tested by heating the package up to 200C°
The undervoltage bit is set if supply voltage drops beyond some critical
threshold. Currently not tested.
In a typical use case, both of this events should be logged and stored
(or send to some remote system) for further investigations.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Richardson says:
====================
pktgen: Add IMIX mode
Adds internet mix (IMIX) mode to pktgen. Internet mix is
included in many user-space network perf testing tools. It allows
for the user to specify a distribution of discrete packet sizes to be
generated. This type of test is common among vendors when perf testing
their devices.
[RFC link: https://datatracker.ietf.org/doc/html/rfc2544#section-9.1]
This allows users to get a
more complete picture of how their device will perform in the
real-world.
This feature adds a command that allows users to specify an imix
distribution in the following format:
imix_weights size_1,weight_1 size_2,weight_2 ... size_n,weight_n
The distribution of packets with size_i will be
(weight_i / total_weights) where
total_weights = weight_1 + weight_2 + ... + weight_n
For example:
imix_weights 40,7 576,4 1500,1
The pkt_size "40" will account for 7 / (7 + 4 + 1) = ~58% of the total
packets sent.
This patch was tested with the following:
1. imix_weights = 40,7 576,4 1500,1
2. imix_weights = 0,7 576,4 1500,1
- Packet size of 0 is resized to the minimum, 42
3. imix_weights = 40,7 576,4 1500,1 count = 0
- Zero count.
- Runs until user stops pktgen.
Invalid Configurations
1. clone_skb = 200 imix_weights = 40,7 576,4 1500,1
- Returns error code -524 (-ENOTSUPP) when setting imix_weights
2. len(imix_weights) > MAX_IMIX_ENTRIES
- Returns -7 (-E2BIG)
This patch is split into three parts, each provide different aspects of
required functionality:
1. Parse internet mix input.
2. Add IMIX Distribution representation.
3. Process and output IMIX results.
Changes in v2:
* Remove __ prefix outside of uAPI.
* Use seq_puts instead of seq_printf where necessary.
* Reorder variable declaration.
* Return -EINVAL instead of -ENOTSUPP when using IMIX with clone_skb > 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The bps for imix mode is calculated by:
sum(imix_entry.size) / time_elapsed
The actual counts of each imix_entry are displayed under the
"Current:" section of the interface output in the following format:
imix_size_counts: size_1,count_1 size_2,count_2 ... size_n,count_n
Example (count = 200000):
imix_weights: 256,1 859,3 205,2
imix_size_counts: 256,32082 859,99796 205,68122
Result: OK: 17992362(c17964678+d27684) usec, 200000 (859byte,0frags)
11115pps 47Mb/sec (47977140bps) errors: 0
Summary of changes:
Calculate bps based on imix counters when in IMIX mode.
Add output for IMIX counters.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to represent the distribution of imix packet sizes, a
pre-computed data structure is used. It features 100 (IMIX_PRECISION)
"bins". Contiguous ranges of these bins represent the respective
packet size of each imix entry. This is done to avoid the overhead of
selecting the correct imix packet size based on the corresponding weights.
Example:
imix_weights 40,7 576,4 1500,1
total_weight = 7 + 4 + 1 = 12
pkt_size 40 occurs 7/total_weight = 58% of the time
pkt_size 576 occurs 4/total_weight = 33% of the time
pkt_size 1500 occurs 1/total_weight = 9% of the time
We generate a random number between 0-100 and select the corresponding
packet size based on the specified weights.
Eg. random number = 358723895 % 100 = 65
Selects the packet size corresponding to index:65 in the pre-computed
imix_distribution array.
An example of the pre-computed array is below:
The imix_distribution will look like the following:
0 -> 0 (index of imix_entry.size == 40)
1 -> 0 (index of imix_entry.size == 40)
2 -> 0 (index of imix_entry.size == 40)
[...] -> 0 (index of imix_entry.size == 40)
57 -> 0 (index of imix_entry.size == 40)
58 -> 1 (index of imix_entry.size == 576)
[...] -> 1 (index of imix_entry.size == 576)
90 -> 1 (index of imix_entry.size == 576)
91 -> 2 (index of imix_entry.size == 1500)
[...] -> 2 (index of imix_entry.size == 1500)
99 -> 2 (index of imix_entry.size == 1500)
Create and use "bin" representation of the imix distribution.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds "imix_weights" command for specifying internet mix distribution.
The command is in this format:
"imix_weights size_1,weight_1 size_2,weight_2 ... size_n,weight_n"
where the probability that packet size_i is picked is:
weight_i / (weight_1 + weight_2 + .. + weight_n)
The user may provide up to 100 imix entries (size_i,weight_i) in this
command.
The user specified imix entries will be displayed in the "Params"
section of the interface output.
Values for clone_skb > 0 is not supported in IMIX mode.
Summary of changes:
Add flag for enabling internet mix mode.
Add command (imix_weights) for internet mix input.
Return -ENOTSUPP when clone_skb > 0 in IMIX mode.
Display imix_weights in Params.
Create data structures to store imix entries and distribution.
Signed-off-by: Nick Richardson <richardsonnick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 0efea3c649 because of:
- The returning -ENOBUF error is fine on socket buffer allocation.
- There is side effect in the calling path
tipc_node_xmit()->tipc_link_xmit() when checking error code returning.
Fixes: 0efea3c649 ("tipc: Return the correct errno code")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot driver makes use of regmap, wrapping it with driver specific
operations that are thin wrappers around the core regmap APIs. These are
exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap
exports which is frowned upon. Add _GPL suffixes to at least the APIs that
are doing register I/O.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When global vlan options are equal sequentially we compress them in a
range to save space and reduce processing time. In order to have the
proper range end id we need to update range_end if the options are equal
otherwise we get ranges with the same end vlan id as the start.
Fixes: 743a53d963 ("net: bridge: vlan: add support for dumping global vlan options")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210810092139.11700-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change adds a 'type' attribute to routes, which can be parsed from
a RTM_NEWROUTE message. This will help to distinguish local vs. peer
routes in a future change.
This means userspace will need to set a correct rtm_type in RTM_NEWROUTE
and RTM_DELROUTE messages; we currently only accept RTN_UNICAST.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20210810023834.2231088-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, four reset types are supported for the HNS3 ethernet
driver: IMP reset, global reset, function reset, and FLR. Only
FLR can now be triggered by the user. To restore the device when
an exception occurs, add support for triggering reset by ethtool.
Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to
trigger the IMP | global | function reset manually.
In addition, VF can only trigger function reset.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm still going to continue looking after the Renesas Ethernet drivers and
device tree bindings. Now my new employer, Open Mobile Platform (OMP), will
pay for all my upstream work. Let's switch to my OMP email for the reviews.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9c212711-a0d7-39cd-7840-ff7abf938da1@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea14 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Toppins says:
====================
bonding: cleanup header file and error msgs
Two small patches removing unreferenced symbols and unifying error
messages across netlink and printk.
====================
Link: https://lore.kernel.org/r/cover.1628650079.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There seems to be no reason to have different error messages between
netlink and printk. It also cleans up the function slightly.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All of the symbols either only exist in bond_options.c or nowhere at
all. These symbols were verified to not exist in the code base by
using `git grep` and their removal was verified by compiling bonding.ko.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers such as sja1105 and stmmac that call xpcs_create() expects an
error returned by the pcs-xpcs module, but this was not the case on
failed to allocate memory.
Fixed this by returning an -ENOMEM instead of a NULL pointer.
Fixes: 3ad1d17154 ("net: dsa: sja1105: migrate to xpcs for SGMII")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ocelot driver makes use of regmap, wrapping it with driver specific
operations that are thin wrappers around the core regmap APIs. These are
exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap
exports which is frowned upon. Add _GPL suffixes to at least the APIs that
are doing register I/O.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210810123748.47871-1-broonie@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f69 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f69 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent change in LLVM causes module_{c,d}tor sections to appear when
CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings
because these are not handled anywhere:
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor'
Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN
flag, so it is in a separate section even with -fno-function-sections
(default)".
Place them in the TEXT_TEXT section so that these technologies continue
to work with the newer compiler versions. All of the KASAN and KCSAN
KUnit tests continue to pass after this change.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1432
Link: 7b78956224
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org
to replace printk(KERN_WARNING ...) with netdev_warn() kindly
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jussi Maki