Intel Flexible Return and Event Delivery (FRED) adds instructions ERETS
(return to supervisor) and ERETU (return to user). Intel PT instruction
decoder needs to know about these instructions because they are
branch instructions. Similar to IRET instructions, when the decoder
encounters one of these instructions it will match it to a TIP (target
instruction pointer) packet that informs what the branch destination is.
The existing "x86 instruction decoder - new instructions" test can be
used to test the result e.g.
$ perf test -v ins |& grep eret
Decoded ok: f2 0f 01 ca erets
Decoded ok: f3 0f 01 ca eretu
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230320183517.15099-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
UINTR and UIRET are listed in table 32-50 "CFE Packet Type and Vector
Fields Details" in the Intel Processor Trace chapter of The Intel SDM
Volume 3 version 078.
The codes are for "User interrupt delivered" and "Exiting from user
interrupt routine" respectively.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230320183517.15099-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If finding a name doesn't find the sorted names then they are
allocated and sorted. This shouldn't be done under a read lock as
another reader may access it. Release the read lock and acquire the
write lock, then release the write lock and reacquire the read lock.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320033810.980165-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A later change will enforce that the map is put on this path
regardless of success or error.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320033810.980165-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid the use of internal apis via the cpumap accessor functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320033810.980165-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than allocate memory, allow abi::__cxa_demangle to do
that. This avoids a problem where on error NULL was returned
triggering a memory leak.
Fixes: 3b4e4efe88 ("perf symbol: Add abi::__cxa_demangle C++ demangling support")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230320033810.980165-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update documentation for new sorting and option '--stdio'.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we have supported histograms list and prepared the dimensions in
the tool, this patch adds TUI mode for stat report. It also adds UI
progress for sorting for better user experience.
Committer notes:
kvm_display() is only used by functions enclosed in:
#if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)
So do it with this new function as well.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add dimensions for count and time percentages, it would be useful for
user to review percentage statistics.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds header, entry callback and width for every dimension,
thus in TUI mode the tool can print items with the defined attributions.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since histograms supports sorting, the tool doesn't need to maintain the
mapping between the sorting keys and the corresponding comparison
callbacks, therefore, this patch removes structure kvm_event_key.
But we still need to validate the sorting key, this patch uses an array
for sorting keys and renames function select_key() to is_valid_key()
to validate the sorting key passed by user.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf kvm tool defines its own cached list which is managed with RB tree,
histograms also provide RB tree to manage data entries. Since now we
have introduced histograms in the tool, it's not necessary to use the
self defined list and we can directly use histograms list to manage
KVM events.
This patch changes to use histograms list to track KVM events, and it
invokes the common function hists__output_resort_cb() to sort result,
this also give us flexibility to extend more sorting key words easily.
After histograms list supported, the cached list is redundant so remove
the relevant code for it.
Committer notes:
kvm_hists__reinit() is only used by functions enclosed in:
#if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)
So do it with this new function as well.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support KVM event statistics, this patch firstly registers histograms
columns and sorting fields; every column or field has its own format
structure, the format structure is dereferenced to access the dimension,
finally the dimension provides the comparison callback for sorting
result.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__hists__add_entry() creates a temporary entry and compare it with
existed histograms entries, if any existed entry equals to the
temporary entry it skips to allocation to avoid duplication.
The problem for support KVM event in histograms is it doesn't contain
any info to identify KVM event and can be used for comparison entries.
This patch adds 'kvm_info' field in the histograms entry which contains
the KVM event's key, this identifier will be used for comparison
histograms entries in later change.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parse address location for samples and save it into the structure
'perf_kvm_stat', it is to be used by histograms entry.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds an argument 'sample' for kvm_alloc_init_event(), and its
caller functions are updated as well for passing down the 'sample'
pointer.
This is a preparation change to allow later patch to create histograms
entries for kvm event, no any functionality changes.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support histograms in perf kvm tool. As first
step, this patch defines histograms data structures and initialize them.
Committer notes:
Those are only used by functions enclosed in:
#if efined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)
So do this for these new functions and struct as well.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variable 'decode_str_len' defines the string length for KVM event
name and every arch defines its own values.
This introduces complexity that the variable definition are spreading in
multiple source files under arch folder. This patch refactors code to
use a macro KVM_EVENT_NAME_LEN to define event name length and thus
remove the definitions in arch files.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the metrics comparison uses greater operator (>), it returns
the boolean value (0 or 1).
This patch changes to use subtraction as comparison result, which can
be used by histograms sorting. Since the subtraction result is u64
type, we change key_cmp_fun's return type to int64_t to avoid overflow.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves up the helper functions of event's metrics for later
adding code to call them.
No any functionality changes, but has a function renaming from
compare_kvm_event_{metric}() to cmp_event_{metric}().
Committer notes:
Those helper functions are only used if this is true:
if defined(HAVE_KVM_STAT_SUPPORT) && defined(HAVE_LIBTRACEEVENT)
So keep them enclosed with that.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes, handling kvm events needs to base on global variables, e.g.
when read event counts we need to know the target vcpu ID; the global
variables are stored in structure perf_kvm_stat.
This patch adds add a 'perf_kvm_stat' pointer in kvm event structure,
it is to be used by later refactoring.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the tool computes overall statistics when sort the results.
This patch refactors overall statistics during events processing,
therefore, the function update_total_coun() is not needed anymore, an
extra benefit is we can de-couple code between the statistics and the
sorting.
This patch is not expected any functionality changes.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230315145112.186603-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add more description and examples.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a BPF filter to work properly, users need to provide appropriate
options to enable the sample types. Otherwise the BPF program would
see an invalid value (i.e. always 0) and filter won't work well.
Show a warning message if sample types are missing like below.
$ sudo ./perf record -e cycles --filter 'addr < 100' true
Error: cycles event does not have PERF_SAMPLE_ADDR
Hint: please add -d option to perf record.
failed to set filter "BPF" on event cycles with 22 (Invalid argument)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It supports two or more expressions connected as a group and the group
result is considered true when one of them returns true. The new group
operators (GROUP_BEGIN and GROUP_END) are added to setup and check the
condition. As it doesn't allow nested groups, the condition is saved
in local variables.
For example, the following is to get samples only if the data source
memory level is L2 cache or the weight value is greater than 30.
$ sudo ./perf record -adW -e cpu/mem-loads/pp \
> --filter 'mem_lvl == l2 || weight > 30' -- sleep 1
$ sudo ./perf script -F data_src,weight
10668100842 |OP LOAD|LVL L3 or L3 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 47
11868100242 |OP LOAD|LVL LFB/MAB or LFB/MAB hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 57
10668100842 |OP LOAD|LVL L3 or L3 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 56
10650100842 |OP LOAD|LVL L3 or L3 hit|SNP None|TLB L2 miss|LCK No|BLK N/A 144
10468100442 |OP LOAD|LVL L2 or L2 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 16
10468100442 |OP LOAD|LVL L2 or L2 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 20
11868100242 |OP LOAD|LVL LFB/MAB or LFB/MAB hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 189
1026a100142 |OP LOAD|LVL L1 or L1 hit|SNP None|TLB L1 or L2 hit|LCK Yes|BLK N/A 193
10468100442 |OP LOAD|LVL L2 or L2 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A 18
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data_src has many entries to express memory behaviors. Add each
term separately so that users can combine them for their purpose.
I didn't add prefix for the constants for simplicity as they are mostly
distinguishable but I had to use l1_miss and l2_hit for mem_dtlb since
mem_lvl has different values for the same names. Note that I decided
mem_lvl to be used as an alias of mem_lvlnum as it's deprecated now.
According to the comment in the UAPI header, users should use the mix of
mem_lvlnum, mem_remote and mem_snoop. Also the SNOOPX bits are
concatenated to mem_snoop for simplicity.
The following terms are used for data_src and the corresponding perf
sample data fields:
* mem_op : { load, store, pfetch, exec }
* mem_lvl: { l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem }
* mem_snoop: { none, hit, miss, hitm, fwd, peer }
* mem_remote: { remote }
* mem_lock: { locked }
* mem_dtlb { l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault }
* mem_blk { by_data, by_addr }
* mem_hops { hops0, hops1, hops2, hops3 }
We can now use a filter expression like below:
'mem_op == load, mem_lvl <= l2, mem_dtlb == l1_hit'
'mem_dtlb == l2_miss, mem_hops > hops1'
'mem_lvl == ram, mem_remote == 1'
Note that 'na' is shared among the terms as it has the same value except
for mem_lvl. I don't have a good idea to handle that for now.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The weight data consists of a couple of fields with the
PERF_SAMPLE_WEIGHT_STRUCT. Add weight{1,2,3} term to select them
separately. Also add their aliases like 'ins_lat', 'p_stage_cyc' and
'retire_lat'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pid is special because it's saved in the PERF_SAMPLE_TID together.
So it needs to differenciate tid and pid using the 'part' field in the
perf bpf filter entry struct.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it uses bpf filters, event might drop some samples. It'd be nice
if it can report how many samples it lost. As LOST_SAMPLES event can
carry the similar information, let's use it for bpf filters.
To indicate it's from BPF filters, add a new misc flag for that and
do not display cpu load warnings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF program will be attached to a perf_event and be triggered when
it overflows. It'd iterate the filters map and compare the sample
value according to the expression. If any of them fails, the sample
would be dropped.
Also it needs to have the corresponding sample data for the expression
so it compares data->sample_flags with the given value. To access the
sample data, it uses the bpf_cast_to_kern_ctx() kfunc which was added
in v6.2 kernel.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This implements a tiny parser for the filter expressions used for BPF.
Each expression will be converted to struct perf_bpf_filter_expr and
be passed to a BPF map.
For now, I'd like to start with the very basic comparisons like EQ or
GT. The LHS should be a term for sample data and the RHS is a number.
The expressions are connected by a comma. For example,
period > 10000
ip < 0x1000000000000, cpu == 3
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In thread__comm_len(),strlen() is called outside of the
thread->comm_lock critical section,which may cause a UAF
problems if comm__free() is called by the process_thread
concurrently.
backtrace of the core file is as follows:
(gdb) bt
#0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77
#1 0x000055ad15d31de5 in thread__comm_len (thread=0x7f627d20e300) at util/thread.c:320
#2 0x000055ad15d4fade in hists__calc_col_len (h=0x7f627d295940, hists=0x55ad1772bfe0)
at util/hist.c:103
#3 hists__calc_col_len (hists=0x55ad1772bfe0, h=0x7f627d295940) at util/hist.c:79
#4 0x000055ad15d52c8c in output_resort (hists=hists@entry=0x55ad1772bfe0, prog=0x0,
use_callchain=false, cb=cb@entry=0x0, cb_arg=0x0) at util/hist.c:1926
#5 0x000055ad15d530a4 in evsel__output_resort_cb (evsel=evsel@entry=0x55ad1772bde0,
prog=prog@entry=0x0, cb=cb@entry=0x0, cb_arg=cb_arg@entry=0x0) at util/hist.c:1945
#6 0x000055ad15d53110 in evsel__output_resort (evsel=evsel@entry=0x55ad1772bde0,
prog=prog@entry=0x0) at util/hist.c:1950
#7 0x000055ad15c6ae9a in perf_top__resort_hists (t=t@entry=0x7ffcd9cbf4f0) at builtin-top.c:311
#8 0x000055ad15c6cc6d in perf_top__print_sym_table (top=0x7ffcd9cbf4f0) at builtin-top.c:346
#9 display_thread (arg=0x7ffcd9cbf4f0) at builtin-top.c:700
#10 0x00007f6282fab4fa in start_thread (arg=<optimized out>) at pthread_create.c:443
#11 0x00007f628302e200 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
The reason is that strlen() get a pointer to a memory that has been freed.
The string pointer is stored in the structure comm_str, which corresponds
to a rb_tree node,when the node is erased, the memory of the string is also freed.
In thread__comm_len(),it gets the pointer within the thread->comm_lock critical section,
but passed to strlen() outside of the thread->comm_lock critical section, and the perf
process_thread may called comm__free() concurrently, cause this segfault problem.
The process is as follows:
display_thread process_thread
-------------- --------------
thread__comm_len
-> thread__comm_str
# held the comm read lock
-> __thread__comm_str(thread)
# release the comm read lock
thread__delete
# held the comm write lock
-> comm__free
-> comm_str__put(comm->comm_str)
-> zfree(&cs->str)
# release the comm write lock
# The memory of the string pointed
to by comm has been free.
-> thread->comm_len = strlen(comm);
This patch expand the critical section range of thread->comm_lock in thread__comm_len(),
to make strlen() called safe.
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yunfeng Ye <yeyunfeng@huawei.com>
Link: https://lore.kernel.org/r/322bfb49-840b-f3b6-9ef1-f9ec3435b07e@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metrics for s390 z14
- Percentage sourced from Level 2 cache
- Percentage sourced from Level 3 on same chip cache
- Percentage sourced from Level 4 Local cache on same book
- Percentage sourced from Level 4 Remote cache on different book
- Percentage sourced from memory
For details about the formulas see this documentation:
https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf
Output after:
# ./perf stat -M l4rp -- find /
.... find output deleted
Performance counter stats for 'find /':
0 L1I_OFFDRAWER_L4_SOURCED_WRITES # 0.01 l4rp
84 L1D_OFFDRAWER_L4_SOURCED_WRITES
0 L1I_OFFDRAWER_L3_SOURCED_WRITES
71,535,353 L1I_DIR_WRITES
219 L1D_OFFDRAWER_L3_SOURCED_WRITES
16,436 L1D_OFFDRAWER_L3_SOURCED_WRITES_IV
0 L1I_OFFDRAWER_L3_SOURCED_WRITES_IV
46,343,940 L1D_DIR_WRITES
10.530805537 seconds time elapsed
0.774396000 seconds user
1.602714000 seconds sys
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metrics for s390 z15
- Percentage sourced from Level 2 cache
- Percentage sourced from Level 3 on same chip cache
- Percentage sourced from Level 4 Local cache on same book
- Percentage sourced from Level 4 Remote cache on different book
- Percentage sourced from memory
For details about the formulas see this documentation:
https://www.ibm.com/support/pages/system/files/inline-files/CPU%20MF%20Formulas%20including%20z16%20-%20May%202022_1.pdf
Outpuf after:
# ./perf stat -M l4rp -- find /
.... find output deleted
Performance counter stats for 'find /':
5 L1I_OFFDRAWER_L4_SOURCED_WRITES # 0.01 l4rp
187 L1D_OFFDRAWER_L4_SOURCED_WRITES
0 L1I_OFFDRAWER_L3_SOURCED_WRITES
231,333,165 L1I_DIR_WRITES
3,303 L1D_OFFDRAWER_L3_SOURCED_WRITES
47,461 L1D_OFFDRAWER_L3_SOURCED_WRITES_IV
0 L1I_OFFDRAWER_L3_SOURCED_WRITES_IV
126,706,244 L1D_DIR_WRITES
27.870355461 seconds time elapsed
0.521562000 seconds user
12.494503000 seconds sys
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230313080201.2440201-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update from v54 to v55. Addition of OFFCORE_RESPONSE,
FP_ARITH_INST_RETIRED.SCALAR, FP_ARITH_INST_RETIRED.VECTOR and
INT_MISC.CLEARS_COUNT.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230314053312.3237390-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update from 1.00 to 1.01, some event description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230314053312.3237390-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Integers are not converted to floats during division in Python 2 which
results in incorrect IPC values. Fix by switching to new division
behavior.
Fixes: a483e64c0b ("perf scripting python: intel-pt-events.py: Add --insn-trace and --src-trace")
Signed-off-by: Roman Lozko <lozko.roma@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230310150445.2925841-1-lozko.roma@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that BPF skel based tools will be built by default if the toolchain
pieces that are needed are available, building directly on the source
tree will produce a vmlinux.h from the BTF info that needs to get
ignored.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A table was renamed and needed to be renamed in the empty case.
Fixes: 62774db2a0 ("perf jevents: Generate metrics and events as separate tables")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308002714.1755698-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show lock type names after the symbol of locks if any. This can be
useful especially when it doesn't show the lock symbols.
The indentation before the lock type parenthesis is to recognize lock
symbols more easily.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
44 6.13 ms 284.49 us 139.28 us ffffffff92e06080 tasklist_lock (rwlock)
159 983.38 us 12.38 us 6.18 us ffff8cc717c90000 siglock (spinlock)
10 679.90 us 153.35 us 67.99 us ffff8cdc2872aaf8 mmap_lock (rwsem)
9 558.11 us 180.67 us 62.01 us ffff8cd647914038 mmap_lock (rwsem)
78 228.56 us 7.82 us 2.93 us ffff8cc700061c00 (spinlock)
5 41.60 us 16.93 us 8.32 us ffffd853acb41468 (spinlock)
10 37.24 us 5.87 us 3.72 us ffff8cd560b5c200 siglock (spinlock)
4 11.17 us 3.97 us 2.79 us ffff8d053ddf0c80 rq_lock (spinlock)
1 7.86 us 7.86 us 7.86 us ffff8cd64791404c (spinlock)
1 4.13 us 4.13 us 4.13 us ffff8d053d930c80 rq_lock (spinlock)
7 3.98 us 1.67 us 568 ns ffff8ccb92479440 (mutex)
2 2.62 us 2.33 us 1.31 us ffff8cc702e6ede0 (rwlock)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the BPF_PROG_RUN mechanism, we can run a raw_tp BPF program to
collect some semi-global locks like per-cpu locks. Let's add runqueue
locks using bpf_per_cpu_ptr() helper.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
248 3.25 ms 32.23 us 13.10 us ffff8cc75cfd2940 siglock
60 217.91 us 9.69 us 3.63 us ffff8cc700061c00
8 70.23 us 13.86 us 8.78 us ffff8cc703629484
4 56.32 us 35.81 us 14.08 us ffff8cc78b66f778 mmap_lock
4 16.70 us 5.18 us 4.18 us ffff8cc7036a0684
3 4.99 us 2.65 us 1.66 us ffff8d053da30c80 rq_lock
2 3.44 us 2.28 us 1.72 us ffff8d053dcf0c80 rq_lock
9 2.51 us 371 ns 278 ns ffff8ccb92479440
2 2.11 us 1.24 us 1.06 us ffff8d053db30c80 rq_lock
2 2.06 us 1.69 us 1.03 us ffff8d053d970c80 rq_lock
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, we can display siglock by following the pointer like
current->sighand->siglock.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
16 2.18 ms 305.35 us 136.34 us ffffffff92e06080 tasklist_lock
28 521.78 us 31.16 us 18.63 us ffff8cc703783ec4
7 119.03 us 23.55 us 17.00 us ffff8ccb92479440
15 88.29 us 10.06 us 5.89 us ffff8cd560b5f380 siglock
7 37.67 us 9.16 us 5.38 us ffff8d053daf0c80
5 8.81 us 4.92 us 1.76 us ffff8d053d6b0c80
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes there are severe contentions on the mmap_lock and we want
see it in the -l/--lock-addr output. However it cannot symbolize
the mmap_lock because it's allocated dynamically without symbols.
Stephane and Hao gave me an idea separately to display mmap_lock by
following the current->mm pointer. I added a flag to mark mmap_lock
after comparing the lock address so that it can show them differently.
With this change it can show mmap_lock like below:
$ sudo ./perf lock con -abl -- sleep 10
contended total wait max wait avg wait address symbol
...
16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640
17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0
3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock
3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58
1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70
9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock
14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0
3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock
16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560
11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock
1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8
1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock
581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058
5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070
112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120
381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock
255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80
Note that mmap_lock was renamed some time ago and it needs to support
old kernels with a different name 'mmap_sem'.
Suggested-by: Hao Luo <haoluo@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building without libelf support is going disable a lot of
functionality. Require that the NO_LIBELF=1 build option is passed if
this is intentional.
Committer notes:
Add NO_LIBELF=1 to the 'make_static' target in tools/perf/tests/make so
that 'make -C tools/perf build-test' works.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter