Instead of rolling out custom suspend/resume implementations based on
state information stored in the driver's data structures, use the atomic
suspend/resume helpers that rely on a DRM atomic state object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The venc_device structure wss_data field is set to 0 and never otherwise
modified, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The kobj field from struct omap_dss_device is not used. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_connector_attached_encoder() doesn't exist anymore, remove its
declaration from omap_connector.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since commit b4935e3a3c ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3c ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Commit edb715dffd ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes: f3ed97f9ae ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.
There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.
Add include of drm_util.h to all users.
v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
function should not be used in new code (Daniel)
v3:
- Fix kernel-doc syntax (Daniel)
- Plug drm_util.h into drm-internels.rst (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
The DSI encoder sets dssdev->ops->dsi.set_config, which is stored at the
same offset as dssdev->ops->hdmi.set_hdmi_mode. The code in omap_encoder
only checks if dssdev->ops->hdmi.set_hdmi_mode is NULL. Due to the way
union works, it won't be NULL if dsi.set_config is set. This means
dsi_set_config will be called with config=hdmi_mode=false=NULL parameter
resulting in a NULL dereference. Also the dereference happens while
console is locked, so kernel hangs without any debug output without
"fb.lockless_register_fb=1" parameter.
This restructures the code, so that the HDMI mode is only configured
for HDMI output types.
Fixes: 83910ad3f5 ("drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
[tomi.valkeinen@ti.com: dropped the safeguard]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-5-sebastian.reichel@collabora.com
After the changes from 4.20 the DSI encoder tries to find the
attached panel before populating the DSI bus. If the panel is
not found -EPROBE_DEFER is returned, so the DSI bus is never
populated and the panel never added.
Fix this by populating the DSI bus before searching for the
video sink in dsi_init_output().
Fixes: 27d624527d ("drm/omap: dss: Acquire next dssdev at probe time")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
panel-dpi used to convey the bus-flags via the videomode, but recent
changes changed the use of videomode to DRM's drm_display_mode which
does not contain bus-flags. This broke panel-dpi, which didn't
explicitly store the bus-flags into dssdev->bus_flags.
Fix this by setting dssdev->bus_flags. Also change the bus_flags type to
u32, as that is the type used in the DRM framework, and we would get a
warning with drm_bus_flags_from_videomode() otherwise.
Fixes: 3fbda31e81 ("drm/omap: Split mode fixup and mode set from encoder enable")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126092447.11864-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We're missing a call to of_platform_depopulate() on errors for dsi.
Looks like dss is already doing this.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com
The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers
attempt to manage the runtime PM state of the connected DISPC, based on
the rationale that the DISPC providing data to the encoders requires
ensuring that the display is active whenever the encoders are active.
While the DISPC provides data to the encoders, it doesn't as such
constitute a resource that encoders require in order to be taken out
of suspend, contrary to for instance a functional clock or a power
supply. Encoders registers can be accessed without the DISPC being
active, and while the encoders will not output any video stream without
being fed by the DISPC, the DISPC PM state doesn't influence the
encoders PM state.
For this reason the DISPC PM state is better managed from the omapdrm
driver, in the CRTC enable and disable operations. This allows the
encoders PM state to be handled separately from the DISPC, and in
particular at times when the DISPC may not be available (for instance at
probe due to the DSS probe being deferred, or at remove time du to the
DISPC being already removed).
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com
The probe function performs hardware access to read the number of
supported data lanes from a configuration register and thus requires the
device to be active. Ensure this by surrounding the access with
dsi_runtime_get() and dsi_runtime_put() calls.
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com
The bind function performs hardware access (in hdmi4_cec_init()) and
thus requires the device to be active. Ensure this by surrounding the
bind function by hdmi_runtime_get() and hdmi_runtime_put() calls.
Fixes: 27d624527d ("drm/omap: dss: Acquire next dssdev at probe time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-3-laurent.pinchart@ideasonboard.com
The DSS DT node contains children that describe the DSS components
(DISPC and internal encoders). Each of those components is handled by a
platform driver, and thus needs to be backed by a platform device.
The corresponding platform devices are created in mach-omap2 code by a
call to of_platform_populate(). While this approach has worked so far,
it doesn't model the hardware architecture very well, as it creates
child devices before the parent is ready to handle them. This would be
akin to creating I2C slaves before the I2C master is available.
The task can be easily performed in the omapdss driver code instead,
simplifying mach-omap2 code. We however can't remove the mach-omap2 code
completely as the omap2fb driver still depends on it, but we can move it
to the omap2fb-specific section, where it can stay until the omap2fb
driver gets removed.
This has the added benefit of not allowing DSS components to probe
before the DSS itself, which led to runtime PM issues when the DSS probe
is deferred.
Fixes: 27d624527d ("drm/omap: dss: Acquire next dssdev at probe time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com
omap_connector_destroy() does:
kfree(omap_connector);
omapdss_device_put(omap_connector->output);
omapdss_device_put(omap_connector->display);
Fix this by moving the kfree after the omapdss_device_puts.
This bug was introduced in 949ea2ef3f
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Errata i878 says that MPU should not be used to access RAM and DMM at
the same time. As it's not possible to prevent MPU accessing RAM, we
need to access DMM via a proxy.
This patch changes DMM driver to access DMM registers via sDMA. Instead
of doing a normal readl/writel call to read/write a register, we use
sDMA to copy 4 bytes from/to the DMM registers.
This patch provides only a partial workaround for i878, as not only DMM
register reads/writes are affected, but also accesses to the DMM mapped
buffers (framebuffers, usually).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
The interrupts should be enabled after the driver initialization to avoid
early interrupts while the driver is not yet ready to handle them.
On removal the interrupts must be disabled before other resources are
released, freed up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver probe would fail if the irq is not available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common':
drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning:
variable 'frame_height' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We prefer to use ERR_CAST to do so.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
tcm-sita.h is unused since commit 0d6fa53fd8 ("drm/omap: Use bitmaps for TILER placement")
Let's remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the .set_timings() operation recursively from the
display device backwards, iterate over the devices manually in the DRM
encoder code. This moves the complexity to a single central location and
simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The video timings are stored in the CRTC structure by the
omap_crtc_dss_set_timings() function, called by dss_mgr_set_timings()
from the .enable() operation of the internal encoders. This instead
belongs to the .set_timings() code paths. Move the
omap_crtc_dss_set_timings() calls accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The VENC encoder modifies the requested video mode to match the NTSC or
PAL timings (or reject the video mode completely) in the .set_timings()
operation. This should be performed in the .check_timings() operation
instead. Move the fixup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The SDI encoder modifies the pixel clock of the requested video mode to
take the limitations of the PLL into account in the .enable() operation.
This should be performed in the .check_timings() operation instead. Move
the fixup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Constify many pointers to struct videomode, as well as pointers to
container structures, to ensure the video mode isn't modified after
the .check_timings() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI encoder modifies the passed videomode to take the requirements
of the internal DISPC-DSI bus into account in the .enable_video_output()
operation. This should be performed in the .check_timings() operation
instead. There is however no .check_timings() operation as the DSI
encoder uses a custom API, so move it to the closest match which is the
.set_config() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The video mode is aleady fixed up by the .check_timings() operation,
there's no need to repeat that when enabling the DPI output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of call the dispc timings check function dispc_mgr_timings_ok()
from the internal encoders .check_timings() operation, expose it through
the dispc ops (after renaming it to check_timings) and call it directly
from omapdrm. This allows removal of now empty omap_dss_device
.check_timings() operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoder enable operation currently performs mode fixup and mode
setting for all omap_dss_device instances in the display pipeline. There
are dedicated encoder operations for those operations (respectively
.atomic_check() and .mode_set()), but they are not used for this
purpose.
Move the mode fixup code to .atomic_check() and the mode set code
.mode_set() to better fit the KMS model. The bus flags fixup has to
happen at .mode_set() time as there is no place to store the bus flags
in the atomic state structures. This could be solved by extending one of
the state structures, but as the goal is to replace the fixup by direct
usage of bus flags through the driver, that would be pointless.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The bus flags stored in omap_dss_device instances are used to fixup the
video mode before setting it, to honour constraints that can't be
expressed through drm_display_mode. The fixup occurs in the CRTC mode
set operation and the resulting video mode is stored internally in the
CRTC. It is then used next by omap_encoder_enable() to apply mode fixups
for the omap_dss_device instances in omap_encoder_update().
Move the hack to the omap_encoder_update() function right before
applying the omap_dss_device fixups, in order to group all fixups
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Panels drivers store their timings in a device data structure field that
is initialized at probe time, either from hardcoded values or from
firmware-supplied values. Those timings are then reported through the
.get_timings() operation to construct the panel display mode.
The panel timings are further modified by the .set_timings() operation,
which is called with the timings retrieved by .get_timings(), and
mangled by .check_timings(). The latter potentially adjusts the pixel
clock only.
Conceptually, modifying the panel timings is wrong, as the timings are
an intrinsic property of the panel and should thus be fixed.
Furthermore, modifying them this way at runtime can result in display
modes reported to userspace varying between calls, which is also wrong.
There's no actual need to store the mangled pixel clock value in the
timings. Don't modify the panel timings in the .set_timings() operation,
just forward it to the previous device in the display pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The analog TV, DVI and HDMI connectors all report timing information
through the .get_timings() information.
For analog TV outputs the information is queried from the encoder, so
the operation is unused. Remove it.
For HDMI outputs the display pipeline provides EDID capability, so the
operation is unused as well. Remove it.
For DVI outputs the operation is also unused if the pipeline provides
EDID capability. Otherwise (when the DDC bus is not connected) we
shouldn't hardcode a single mode, but instead report no mode and let the
KMS core add default modes. This is achieved by removing the operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Timings for the TV output are currently reported by the analog TV
connector. This has the disadvantage of having to handle timing-related
operations in a connector omap_dss_device that has, at the hardware
level, no knowledge of any timing information.
Implement the .get_timings() operation in the venc driver, and get
timings from the first component in the pipeline that implements the
operatation. This switches the duty of reporting analog TV timings from
the connector to the encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .check_timings() operation is called recursively from the display
device back to the output device. Most components just forward the
operation to the previous component in the chain, resulting in lots of
duplicated pass-through functions. To avoid that, iterate over the
components manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Source components in the display pipeline need to configure their output
signals polarities and clock driving edge based on the requirements of
the sink component.
Those requirements are currently shared across the whole pipeline in the
flags of a videomode structure, instead of being local to each bus. This
both prevents multiple buses from having different configurations (when
the hardware supports it), and makes it difficult to move from videomode
to drm_display_mode as the latter doesn't contain bus polarities and
clock edge flags.
Add a bus_flags field to the omap_dss_device structure and move the
DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all
external encoders, connectors and panels. The videomode flags are still
used internally for internal encoders, this will be addressed in a
second step.
The related videomode flags in the default mode of the DVI connector can
simply be dropped, as they are always overridden by the TFP410 driver.
Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and
DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only
the former is tested for when programming the DISPC, so the DVI
connector flags are effectively overridden by the TFP410 flags.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .set_timings() operation for external encoders
stores the video mode in the device data structure. That mode is then
never used again. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .check_timings() operation is present in all panels and connectors.
The fallback that uses .get_timings() in the absence of .check_timings()
is thus unneeded.
While it could be argued that the fallback implements a useful check
that should be extended to cover all fixed-resolution panels, the code
is currently unused and gets in the way of the ongoing refactoring.
Remove it, a similar feature can always be added later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .set_timings() operations are called directly from
omap_encoder_update(), and indirectly from the omap_dss_device .enable()
operation. The latter is called from omap_encoder_enable(), right after
calling omap_encoder_update(). The .set_timings() operation it thus
called twice in a row. Fix it by removing the indirect call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .set_timings() operations of the omap_dss_device instances don't
need to modify the passed timings. Make the pointer const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Both the .check_timings() and .set_timings() handlers call
tfp410_fix_timings() to fix the timing's flags. As .check_timings() is
always called before .set_timings(), there's no need to fix the flags
twice. Remove the tfp410_fix_timings() call from .set_timings().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The two functions implement the .set_timings() and .check_timings()
operations. Rename them to hdmi_disply_set_timings() and
hdmi_display_check_timings() respectively to match the operations names
and make searching the source code easier.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of determining the connector type from the type of the display's
omap_dss_device and passing it to the omap_connector_init() function,
move the type determination code to omap_connector.c and remove the type
argument to the connector init function. This moves code to a more
natural location, making the driver easier to read.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The drm_connector implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Refactoring of the timings operations
will require access to the output omap_dss_device. To prepare for that,
pass it to the connector initialization function and store it internally
as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI mode (.set_hdmi_mode()) and infoframe (.set_infoframe())
operations are called recursively from the display device back to the
HDMI encoder. This isn't required, as all components other than the HDMI
encoder just forward the operation to the previous component in the
chain. Call the operations directly on the HDMI encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The drm_encoder implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Clean up of the HDMI mode and infoframe
handling will require access to the output omap_dss_device. To prepare
for that, pass it to the encoder initialization function and store it
internally as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The CRTC mode set implementation needs to access the omap_dss_device for
the pipeline display. To do so, it iterates over all pipelines to find
the one that contains an encoder corresponding to the CRTC, and request
the display device from the encoder. That's a very complicated dance
when the CRTC has a direct pipeline pointer already, and the pipeline
contains a pointer to the display device.
Replace the convoluted code with direct access.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the EDID read operation (.read_edid()) recursively
from the display device back to the first device that provides EDID read
support, iterate over the devices manually in the DRM connector code.
This moves the complexity to a single central location and simplifies
the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On HDMI outputs, CEC support requires notification of HPD signal
deassertion. The HPD signal can be handled by various omap_dss_device
instances in the pipeline, and all of them forward HPD events to the
OMAP4 internal HDMI encoder.
Knowledge of the DSS internals need to be removed from the
omap_dss_device instances in order to migrate to drm_bridge. To do so,
move HPD handling for CEC to the omap_connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .enable_hpd() and .disable_hpd() are used to enable
and disable hot-plug detection at omapdrm probe and remove time. This is
required to avoid reporting hot-plug detection events before the DRM
infrastructure is ready to accept them, as that could result in crashes
or other malfunction.
Hot-plug event reporting is conditioned by both HPD being enabled
through the .enable_hpd() operation and by the HPD callback being
registered though the .register_hpd_cb() operation. We thus don't need a
separate enable operation if we can guarantee that callbacks won't be
registered too early.
HPD callbacks are registered at connector initialization time, which is
too early to start reporting HPD events. There's however nothing
blocking a move of callback registration to a later time when the
omapdrm driver calls the HPD enable operations. Do so, and remove the
HPD enable operation completely from omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HPD-related omap_dss_device operations are now only called when the
device supports HPD. There's no need to duplicate that check in the
omap_dss_device drivers. The .register_hpd_cb() operation can as a
result be turned into a void operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the hot-plug detection callback registration
operations (.register_hpd_cb() and .unregister_hpd_cb()) recursively
from the display device back to the first device that provides hot plug
detection support, iterate over the devices manually in the DRM
connector code. This moves the complexity to a single central location
and simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the .detect() operation recursively from the display
device back to the first device that provides hot plug detection
support, iterate over the devices manually in the DRM connector
.detect() implementation. This moves the complexity to a single central
location and simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an omap_dss_device operation can be implemented in multiple places
in a chain of devices, it is important to find out which device to
address to perfom the operation. This is currently done by calling the
operation on the display device at the end of the chain, and recursively
delagating the operation to the previous device if it can't be performed
locally. The drawback of this approach is an increased complexity in
omap_dss_device drivers.
In order to simplify the drivers, we will switch from a recursive model
to an interative model, centralizing the complexity in a single
location. This requires knowing which operations an omap_dss_device
supports at runtime. We can already test which operations are
implemented by checking the operation pointer, but implemented
operations can require resources whose availability varies between
systems. For instance a hot-plug signal from a connector can be wired to
a GPIO or to a bridge chip.
Add operation flags that can be set in the omap_dss_device structure by
drivers to signal support for operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_dss_device instances have two ops structures, omap_dss_driver and
omap_dss_device_ops. The former is used for devices at the end of the
pipeline (a.k.a. display devices), and the latter for intermediate
devices.
Having two sets of operations isn't convenient as code that iterates
over omap_dss_device instances need to take them both into account.
There's currently a reasonably small amount of such code, but more will
be introduced to move the driver away from recursive operations. To
simplify current and future code, move all operations that are not
specific to the display device to the omap_dss_device_ops.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
As the descriptor API handles the active-low flag internally we need to
invert the polarity of all GPIO operations in the driver. Rename the
nreset_gpio field to reset_gpio to reflect that.
The reset GPIO is mandatory, so drop conditional tests through the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver doesn't use GPIOs and thus doesn't need to include the
linux/gpio.h header.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
The reset GPIO is mandatory, so drop conditional tests through the
driver. The qvga GPIO is unused, so drop it completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
As the descriptor API handles the active-low flag internally we need to
invert the polarity of all GPIO operations in the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Various functions that need to differentiate between omap_dss_device
instances corresponding to displays and to internal encoders use the
omap_dss_device.driver field, which is only set for display instances.
This gets in the way of the omap_dss_device operations refactoring.
Replace that with a check based on the output_type field which is set
for all omap_dss_device instances but displays.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm driver checks at suspend and resume time whether the
displays it operates on have their driver operations set. This check is
unneeded, as all display drivers set the driver operations field at
probe time and never touch it afterwards. This is furthermore proven by
the dereferencing of the driver field without checking it first in
several locations.
The omapdss driver performs a similar check at shutdown time. This is
unneeded as well, as the for_each_dss_display() macro it uses to iterate
over displays locates the displays by checking the driver field
internally.
As those checks are unnecessary, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .get_mirror() and .set_mirror() omap_dss_driver operations are
implemented by the panel-tpo-td043mtea1 driver but are never used.
Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .probe(), .remove(), .run_test(), .get_rotate() and .set_rotate()
omap_dss_driver operations are not used. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dss_mgr .connect() and .disconnect() are implemented as no-op in
omapdrm. The operations are unneeded, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device.dispc_channel_connect field is used by DSS outputs
to fail the .enable() operation if they're not connected. Set the field
directly from the (dis)connect handlers of the DSS outputs instead of
going through the CRTC dss_mgr operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The CRTC connect handler checks whether the DSS output supports the
DISPC channel assigned to it. As the channel is assigned to the output
by the output driver a failure there could only result from a driver
bug. All the output drivers have been verified and they are always
assigned a DISPC channel that is supported on the SoC they run on. The
check can thus be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtc_output global array is used to look up the DSS output
device by channel. We can replace that by accessing the output device
from the pipeline if we store the pipeline pointer in the omap_crtc
structure.
The global array is also used to protect against double connection of an
output. This can't happen with the connection handling mechanism going
from DSS outputs to displays. We can thus drop that check, allowing
removal of the global array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtcs global array is used to store pointers to omap_crtc
indexed by DISPC channel number, in order to look them up in the dss_mgr
operations. Store the information in the omap_drm_private structure in
the form of an array of omap_drm_pipeline pointers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Replace the dss display device pointer by a pipe pointer that will allow
the omap_crtc_init() function to access both the display and the DSS
output. As a result we can remove the omapdss_device_get_dispc_channel()
function that is now unneeded.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To simplify the pipeline disconnection handling merge the
omapdss_device_disconnect() and omapdss_output_unset_device() functions.
The device state check is now called for every device in the pipeline,
extending this sanity check coverage.
There is no need to return an error from omapdss_device_disconnect()
when the check fails, as omapdss_output_unset_device() used to do, given
that we can't prevent disconnection due to device unbinding (the return
value of omapdss_output_unset_device() is never checked in the current
code for that reason).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The display type is validated when the display is connected to the DSS
output. We already have all the information we need for validation when
initializing the outputs. Move validation to output initialization to
simplify pipeline connection handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When a DSS output is (dis)connected the omapdss_output_(un)set_device()
function performs a sanity check to ensure that the output isn't already
(dis)connected. The check is unnecessary as those situations should
never happen, but can nonetheless be useful to catch driver bugs. To
prepare for removal of the omapdss_output_(un)set_device() functions
move the connection check to the omapdss_device_connect() function. The
omapdss_device_disconnect() already contains a corresponding check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.
To reconcile the omapdrm and omapdss drivers with the DRM bridge and
panel model, we need to reverse the direction of the DSS device
operations. Start with the connect and disconnect operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Create an omap_drm_pipeline structure to model display pipelines, made
of a CRTC, an encoder, a connector and a DSS display device. This allows
grouping related parameters together instead of storing them in
independent arrays and thus improves code readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Creating all the planes in a single location instead of creating them
per-CRTC with remaining planes then created in a second step simplifies
the logic.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The crtc_idx and plane_idw variables in the main loop are always equal
to the loop counter i, use it instead. Don't unnecessarily initialize
dssdev to NULL.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Regulators for the DPI, DSI, HDMI, SDI and VENC outputs are all looked
up when connecting the output omap_dss_device. There's no need to delay
regulator handling to that time, get the regulators at probe time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dss_mgr_connect() and dss_mgr_disconnect() functions take two
omap_dss_device pointers as parameters, which are always set to the same
value by all callers. Remove the duplicated pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a new omapdss_display_get() function to retrieve the omap_dss_device
for a given DSS output. This will be used when reversing the direction
of the DSS pipeline handling logic.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Similarly to for_each_dss_display(), the for_each_dss_output() macro
iterates over all the DSS connected outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Look up the next dssdev at probe time based on device tree links for all
DSS outputs and encoders. This will be used to reverse the order of the
dssdev connect and disconnect call chains.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Rename the jump labels according to the cleanup they perform, not the
location they're accessed from, and move functions from error checks to
cleanup paths, and move reference handling to simplify cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connect handle of the analog TV and HDMI connectors casts the dssdev
to panel data only to then access fields of the panel data that are also
present in the dssdev. Remove the cast and use dssdev directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss_of_find_source_for_first_ep() function locates the source
corresponding to the first endpoint of the first port of a device node.
We can easily extend it to locate sinks as well by passing the port
number as a parameter. This will be useful to find sinks in encoders
drivers.
Extend the function and rename it to omapdss_of_find_connected_device()
to reflect its new extended purpose.
Additionally, it is useful to differentiate between failures to return
the connected device because no link exists in the device tree for the
requested port, or because the connected device as described in the
device tree is invalid or not probed yet. Return NULL in the first case
and an error code in the second case, and update the callers
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device port_num field stores the DT port number associated
with the device. The field is used in different ways depending on the
device type:
- For DPI outputs, the port number is used as an identifier of the DPI
instance
- For sources, the port number is used to look up the omap_dss_device by
DT port node
As omap_dss_device instances are only looked up as sources by sinks,
setting the field to the number of the source port works for both use
cases.
However, to enable looking up sinks, we need to record all the ports
associated with an omap_dss_device. Do so by turning the port_num field
into an of_ports bitmask. For DPI outputs the port number is
additionally stored in the dpi_data structure as the output ID.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss_find_output_from_display() function is only used to retrieve
the dispc channel corresponding to the display. Return the dispc channel
directly, and rename the function to omapdss_device_get_dispc_channel()
to match its new purpose.
The dssdev->id check is removed as the dssdev is guaranteed to be an
output and have a non-zero id, as proved by the lack of crash despite
the caller never checking the returned pointer before dereferencing it.
As the function is not specific to outputs anymore, move it from
output.c to base.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSS manager ops and private data pointer are specific to a DSS
instance. Store them in the dss_device structure instead of global
variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Storing the dss_device pointer in the omap_dss_device structure will
allow accessing the dss_device from the dss_mgr API functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The functions operate on any omap_dss_device, move them from display.c
to base.c. While at it rename them to match the naming of the other
functions operating on struct omap_dss_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The panel devices list isn't used anymore, all panel devices are
accessed through the global devices list. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Split the function into omapdss_display_init() to perform
display-specific initialization of the omap_dss_device, and
omapdss_register_display() to register the device. The latter will then
be replaced by more generic registration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Despite its name, the omap_dss_get_next_device() function operates on
display devices only. Make it more generic by allowing operation on all
devices, with a parameter to specify the device type.
While at it rename the function to omapdss_device_get_next() to match
the naming of the other functions operating on struct omap_dss_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The macro iterates over displays only, rename it accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The output devices list isn't used anymore, all output devices are
accessed through the global devices list. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI clocks are dumped in the DSS-level debugfs clocks file. This
complicates the implementation as the DSI private data has to be looked
up through the outputs list. Simplify it by creating two debugfs files,
dsi1_clks and dsi2_clks, to dump the DSI clocks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI debugfs regs and irqs show handlers received a pointer to the
DSI private data. There's no need to look it up from the list of DSS
outputs. Use the pointer directly, this allows simplifying the
implementation of the handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
All connectors, encoders and panels store a pointer to their input
omap_dss_device in the panel driver data structure. This duplicates the
src field in the omap_dss_device structure. Remove the private copy and
use the src field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoders duplicate the same omap_dss_device src and dst fields set
and checks in their connect and disconnect handlers. Move the code to
the connect and disconnect wrappers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In preparation for the move of checks from the disconnect handlers to
the omapdss_device_disconnect() function, replace direct calls to the
disconnect handlers at remove time with calls to
omapdss_device_disconnect().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connectors, encoders and display duplicate the same debug messages
and connection checks in their omap_dss_device connect and disconnect
handlers. Move the code to the connect and disconnect wrappers.
To simplify the code the connect function returns -EBUSY unconditionally
if the device is already connected. This doesn't cause any change in
practice: the connect handler of displays is never called on a connected
device as it is only invoked during omapdrm initialization.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device objects model display components and are connected
at runtime to create display pipelines. The connect and disconnect
operations implemented by each component contain lots of duplicate code.
As a first step towards fixing this, create new functions to wrap the
direct calls to those operations and use them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The various types of omapdss_*_ops structures define multiple operations
that are not specific to a bus type. To simplify the code and remove
dependencies on specific bus types move those operations to a common
structure. Operations that are specific to a bus type are kept in the
specialized ops structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_find_output_by_port() function looks up an omap_dss_device
by port from the list of devices registered as outputs. In preparation
for looking up sinks in addition to sources, allow the function to look
up any registered device. Rename it to omap_dss_find_device_by_port() to
match its new purpose.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_find_output_by_port_node() function defined in output.c
looks up an output from its port node. To do so it needs to call helper
functions from dss-of.c to lookup the port parent and the port number.
As omap_dss_find_output_by_port_node() is only called by
omapdss_of_find_source_for_first_ep() from dss-of.c this goes back and
forth between the to source files and isn't very clear.
Simplify the code by passing both the parent and the port number to
omap_dss_find_output_by_port_node() instead of the port node, and rename
the function to omap_dss_find_output_by_port().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss_component_is_loaded() function test whether a component is
loaded by checking whether it is present in the displays list or the
outputs list. Simplify the implementation by checking for the component
in the global omap_dss_device list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device instances are stored in two separate lists,
depending on whether they are panels or outputs. Create a third list
that stores all omap_dss_device instances to allow generic code to
operate on all instances.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
For coherency with the panel_list field, rename list to output_list.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device panel.dsi_pix_fmt and panel.dsi_mode fields are
unused. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device structure stores a videomode. All the connector and
panel drivers that use omap_dss_device also store the videomode in their
own panel_drv_data structures. There's no need to duplicate, remove the
videomode field from omap_dss_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The structure contains function pointers that don't need to be modified.
Make all its instances const to improve security.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
All omap_dss_driver instances provide the get_timings operation. Remove
the default function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The get_timings operation from DSS encoders (not to be confused with the
identically named operation in omap_dss_driver) is never called. Remove
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The operations are never used, remove them. If the need to set wide
screen signaling data arises later, it should be implemented by
extending the DRM bridge API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dpi_init_port() and sdi_init_port() functions can return errors but
their return value is ignored. This prevents both probe failures and
probe deferral from working correctly. Propagate the errors up the call
stack.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Register the omapdrm device when we know that dss device probe going
to succeed. This avoids DSS6 and DSS2 omapdrm device registration from
colliding with each other.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss_gather_components() function walks the OF graph to create a
list of all components part of the display device. There's no need to
delay this operation until DSS bind time as we have all the information
we need at probe time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As ordering of the dss_devices based on DT aliases is now implemented in
omap_drm.c, there is no need to do the ordering in dss/display.c
anymore.
At the same time remove the alias member of the omap_dss_device struct
since it is no longer needed. The only place it was used is in the
omapdss_register_display() function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Sort the dssdev array based on DT aliases.
With this change we can remove the panel ordering from dss/display.c and
have all sorting related to dssdevs in one place.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of reaching back to DSS to iterate through the dss_devices every
time, use an internal array where we store the available and usable
dss_devices.
At the same time remove the omapdss_device_is_connected() check from
omap_modeset_init() as it became irrelevant: We are not adding dssdevs
if their connect failed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If we allocate the drm_device earlier we can just return the error code
without the need to use goto.
Do the unref of the drm_device as a last step when cleaning up. This will
make the drm_device available longer for us and makes sure that we only
free up the memory when all other cleanups have been already done.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The only thing that omap_gem_free_object does that might need the magic
protection of struct_mutex (of keeping all objects alive if that lock is
held, even if the last reference is gone) is the mm_list manipulation.
This is already protected by the separate omapdrm->list_lock, which
means that struct_mutex is not needed by omapdrm. We can switch to
gem_free_object_unlocked()
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
- None of the list walkings where protected.
- Switch to a mutex since the list walking at device resume time can
sleep when pinning buffers through the tiler.
Only thing we need to be careful with here is that while we walk the
list we can't unreference any gem objects, since the final unref would
result in a recursive deadlock. But the only functions that walk the
list is the device resume and debugfs dumping, so all safe.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM device struct_mutex is used to protect against concurrent GEM
object operations that deal with memory allocation and pinning. All
those operations are local to a GEM object and don't need to be
serialized across different GEM objects. Replace the struct_mutex with
a local omap_obj.lock or drop it altogether where not needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
GEM objects mmap offsets are created by calling
drm_gem_create_mmap_offset_size() that doesn't need struct_mutex
protection as it includes its own locking, based on a size that is
static across the object's life time. Remove the unneeded struct_mutex
locking.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The __omap_gem_get_pages() function is a wrapper around
omap_gem_attach_pages() that returns the omap_obj->pages pointer through
a function argument. Some callers don't need the pages pointer, and all
of them can access omap_obj->pages directly. To simplify the code merge
the __omap_gem_get_pages() wrapper with omap_gem_attach_pages() and
update the callers accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
get_pages() as a local function name is too generic and easily confused
for a generic MM kernel function. Rename it to __omap_gem_get_pages().
Rename the is_contiguous(), is_cache_coherent(), evict(), evict_entry(),
fault_1d() and fault_2d() functions for the same reason.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Description of DRA7 Errata i932:
In rare circumstances DPLL_VIDEO1 and DPLL_VIDEO2 PLL's may not lock on
the first attempt during DSS initialization. When this occurs, a
subsequent attempt to relock the PLL will result in PLL successfully
locking.
This patch does the following as per the errata recommendation:
- retries locking the PLL upto 20 times.
- The time to wait for a PLL lock set to 1000 REFCLK cycles. We use
usleep_range to wait for 1000 REFCLK cycles in the us range. This tight
constraint is imposed as a lock later than 1000 REFCLK cycles may have
high jitter.
- Criteria for PLL lock is extended from check on just the PLL_LOCK bit
to check on 6 PLL_STATUS bits.
Silicon Versions Impacted:
DRA71, DRA72, DRA74, DRA76 - All silicon revisions
AM57x - All silicon revisions
OMAP4/5 are not impacted by this errata
Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com>
[tomi.valkeinen@ti.com: ported to v4.14]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_mixed() returns err which driver
mapped into VM_FAULT_* type. Also return value of
vm_insert_mixed() not handled correctly and 0 was
returned inside fault_2d() as default. The new function
vmf_insert_mixed() will replace this inefficiency by
returning correct VM_FAULT_* type.
vmf_error() is the newly introduce inline function
in 4.17-rc6.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Some functions are unused after removal of the kmap_atomic
DMA-buf interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: f664a52695 ("dma-buf: remove kmap_atomic interface")
Link: https://patchwork.freedesktop.org/series/45245/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbFzauAAoJEAx081l5xIa+jzwP/AwfTreH3XBmlLeMO8kwkAMW
AiH1u3KHrlitN1U85x90dC8hVuuV2Kv9pEXQo1me/TAL/QCb9VZYCSf2dHHkkMwD
1UdwxAQW7soBbTRo9k0zuVJpRGSYIiYfqDh3L6KmTC3UF0tUJm53VOWCLG/DNrtn
XhEnGnlCUNbABZMMpavEvlwxPtvaYFlp6M+MmwRPIx32SrPJ3vSaBzxwWxOaFmjU
xiRdK+GpAbCV8yGeCCSkDgEe/TdWGUhZxoC9dLb0H9ex7ip8uZ0W4D+VTHPFrhQX
6nCpqUbp7BQTsbVSd1pAVsAv45scmSgWbKcqfC0NKSVcsHcJZBR0tQOF9OvnGZcf
o1Hv/beTqJ++IcG2rEIwyJTGxAGfZ0YSb0evTC9VcszaYo+b3+G283bdztIjzDeS
0QCTeLHYbZRHPITWVULNpMWy3TkJv32IdFhQfYSnD8/OGQIxLNhh4FFOtHnOmxSF
N8dnzOLKXhXMo/NgOL+UMNnbgLqIyOtEXCPDLuOQJNv/SOp8662m/A0yRjQNR6M2
gsPmR7dxQIwwJMyqrkLDOF411ABZohulquYgwLgG938MRPmTpPWOR72PtpGF4hAW
HLg+3HHBd1N/A1mlJUMAbUn2eMUACZBUIycE9u+U/geRgve/OQnzJH/FKGP2EJ4R
pf6CruEva+6GRR5GVzuM
=twst
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This starts to support NVIDIA volta hardware with nouveau, and adds
amdgpu support for the GPU in the Kabylake-G (the intel + radeon
single package chip), along with some initial Intel icelake enabling.
Summary:
New Drivers:
- v3d - driver for broadcom V3D V3.x+ hardware
- xen-front - XEN PV display frontend
core:
- handle zpos normalization in the core
- stop looking at legacy pointers in atomic paths
- improved scheduler documentation
- improved aspect ratio validation
- aspect ratio support for 64:27 and 256:135
- drop unused control node code.
i915:
- Icelake (ICL) enabling
- GuC/HuC refactoring
- PSR/PSR2 enabling and fixes
- DPLL management refactoring
- DP MST fixes
- NV12 enabling
- HDCP improvements
- GEM/Execlist/reset improvements
- GVT improvements
- stolen memory first 4k fix
amdgpu:
- Vega 20 support
- VEGAM support (Kabylake-G)
- preOS scanout buffer reservation
- power management gfxoff support for raven
- SR-IOV fixes
- Vega10 power profiles and clock voltage control
- scatter/gather display support on CZ/ST
amdkfd:
- GFX9 dGPU support
- userptr memory mapping
nouveau:
- major refactoring for Volta GV100 support
tda998x:
- HDMI i2c CEC support
etnaviv:
- removed unused logging code
- license text cleanups
- MMU handling improvements
- timeout fence fix for 50 days uptime
tegra:
- IOMMU support in gr2d/gr3d drivers
- zpos support
vc4:
- syncobj support
- CTM, plane alpha and async cursor support
analogix_dp:
- HPD and aux chan fixes
sun4i:
- MIPI DSI support
tilcdc:
- clock divider fixes for OMAP-l138 LCDK board
rcar-du:
- R8A77965 support
- dma-buf fences fixes
- hardware indexed crtc/du group handling
- generic zplane property support
atmel-hclcdc:
- generic zplane property support
mediatek:
- use generic video mode function
exynos:
- S5PV210 FIMD variant support
- IPP v2 framework
- more HW overlays support"
* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
drm/amdgpu: fix 32-bit build warning
drm/exynos: fimc: signedness bug in fimc_setup_clocks()
drm/exynos: scaler: fix static checker warning
drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
drm/amd/display: Remove use of division operator for long longs
drm/amdgpu: Update GFX info structure to match what vega20 used
drm/amdgpu/pp: remove duplicate assignment
drm/sched: add rcu_barrier after entity fini
drm/amdgpu: move VM BOs on LRU again
drm/amdgpu: consistenly use VM moved flag
drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
drm/amdgpu: further optimize amdgpu_vm_handle_moved
drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
drm/amdgpu: rework VM state machine lock handling v2
drm/amdgpu: Add runtime VCN PG support
drm/amdgpu: Enable VCN static PG by default on RV
drm/amdgpu: Add VCN static PG support on RV
drm/amdgpu: Enable VCN CG by default on RV
drm/amdgpu: Add static CG control for VCN on RV
drm/exynos: Fix default value for zpos plane property
...
omap_framebuffer_get_next_connector() uses plane->fb which we want to
deprecate for atomic drivers. As omap_framebuffer_get_next_connector()
is unused just nuke the entire function.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-11-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm_framebuffer already holds per-plane pitch and offsets, which is
filled out for us when we create the framebuffer. Nuke our local copy in
the plane struct.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-7-daniels@collabora.com
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-6-daniels@collabora.com
-----BEGIN PGP SIGNATURE-----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=4NJV
-----END PGP SIGNATURE-----
Merge drm-fixes-for-v4.17-rc6-urgent into drm-next
Need to backmerge some nouveau fixes to reduce
the nouveau -next conflicts a lot.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Handle memory allocation failures in omap_connector to avoid NULL
derefs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-5-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
A bunch of debug and error prints are missing linefeeds. Add those.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-4-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
If get_scale_coef functions fail, they return NULL, but we never check
the return value and could do a NULL deref. This should not happen as we
ought to validate the amount of scaling already earlier, but to be safe,
add the necessary check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-3-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
soc_device_match() can return NULL, so add a check and fail if
soc_device_match() fails.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
tiler_reserve_2d allocates memory but does not check if it got the
memory. Add the check and return ENOMEM on failure.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-2-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
audio_config function for both HDMI4 and HDMI5 return uninitialized
value as the error code if the display is not currently enabled. For
some reason this has not caused any issues.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-1-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Smatch complains that "area_free" could be used without being
initialized. This code is several years old and premusably works fine
so this can't be a very serious bug. But it's easy enough to silence
the warning. If "area_free" is false at the end of the function then
we return -ENOMEM.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418142937.GA13828@mwanda
Signed-off-by: Sean Paul <seanpaul@chromium.org>
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
Commit 8a7eda7686 ("drm: omapdrm: dispc:
Pass DISPC pointer to remaining dispc API functions") made dpi.c use
ctx->pll even when there's no PLL, causing a crash at modeset on AM4
EVM, and presumably all OMAP2/3 boards.
Fix this by having struct dpi_data pointer in the ctx instead, giving
access to dispc without going through the pll.
Fixes: 8a7eda7686 ("drm: omapdrm: dispc: Pass DISPC pointer to remaining dispc API functions")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Keerthy <j-keerthy@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405065537.29818-1-tomi.valkeinen@ti.com
Planes with identical zpos value will result undefined behavior:
disappearing planes, screen flickering and it is not supported by the
hardware.
Use normalized zpos to make sure that we don't encounter invalid
configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-7-peter.ujfalusi@ti.com
When CONFIG_OMAP2_DSS_DPI is disabled, compilation fails due to:
drivers/gpu/drm/omapdrm/dss/dss.h:388:25: error: conflicting types for ‘port’
struct device_node *port,
^~~~
Fix this by renaming the first parameter correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When compiling with CONFIG_OMAP2_DSS_DEBUGFS disabled, build fails due
to:
drivers/gpu/drm/omapdrm/dss/dss.c:1474:10: error: ‘dss_debug_dump_clocks’ undeclared (first use in this function); did you mean ‘dispc_dump_clocks’?
dss_debug_dump_clocks, dss);
^~~~~~~~~~~~~~~~~~~~~
dispc_dump_clocks
Fix this by moving the required functions outside #if
defined(CONFIG_OMAP2_DSS_DEBUGFS).
In the long term, we perhaps want to try to get all the debugfs support
left out if debugfs is not enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver accesses the ddata->in field before it gets set in the
dsicm_connect() function. Use the local in pointer variable instead.
Fixes: 7877632b4cd0 ("drm: omapdrm: displays: Get panel source at connect time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The setup code for color space conversion is a bit messy. This patch
cleans it up.
For some reason the TRM uses values in YCrCb order, which is also used
in the current driver, whereas everywhere else it's YCbCr (which also
matches YUV order). This patch changes the tables to use the common
order to avoid confusion.
The tables are split into separate lines, and comments added for
clarity.
WB color conversion registers are similar but different than non-WB, but
the same function was used to write both. It worked fine because the
coef table was adjusted accordingly, but that was rather confusing. This
patch adds a separate function to write the WB values so that the coef
table can be written in an understandable way.
Recalculation also showed that 'bcb' value in yuv-to-rgb conversion had
been rounded wrongly, and it should be 516 instead of 517.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Allow HDMI audio setup even if we do not have video configured. Audio
will get configured at the same time with video if the video is
configured soon enough. If it is not the audio DMA will timeout in
couple of seconds and audio playback will be aborted.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We define max width and height in mode_config to 2048. These maximums
affect many things, which are independent and depend on platform. We
need to do more fine grained checks in the code paths for each
component, and so the maximum values in mode_config should just be "big
enough" to cover all use cases.
Change the maximum width & height to 8192.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add writeback specific dispc functions to dispc_ops so that omapdrm can
use them. Also move 'enum dss_writeback_channel' to the public
omapdss.h for omapdrm.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
WB has additional scaling limits when the output color format is one of
the YUV formats. These limits are not handled at the moment, causing
bad scaling and/or NULL dereference crash.
This patchs adds the check so that dispc returns an error for bad
scaling request.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When using WB capture from interlaced source, we need to halve the
picture heights correctly.
Unfortunately the current dispc_ovl_setup_common() doesn't deal with
interlace very neatly, so the end result is a bit messy.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Vertical blanking needs to be halved on interlace modes. WBDELAYCOUNT
was calculated without such halving, resulting in WBUNCOMPLETE errors.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
For HDMI, WBDELAYCOUNT starts counting at the start of vsync, not at the
start of vfp.
This patch adjusts the wbdelay for HDMI accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We need to know the WB channel-in in wb_setup() to be able to configure
WB properly for capture mode. At the moment channel-in is set
separately.
This patch moves channel-in to wb_setup().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In dispc_set_ovl_common() we need to initialize pclk to a valid
value when we use WB in capture mode (i.e. mem_2_mem is false).
Otherwise dispc_ovl_calc_scaling() fails.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When dispc_wb_setup() calls dispc_ovl_setup_common() it does not
check for failure but instead keeps on partially setting up WB.
This causes the WB H/W to be partially initialized and yield
unexpected behavior.
Make sure return code is successful before proceeding.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
A few enums are not used anywhere, so remove them.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add HPD support to the DVI connector driver. The code is almost
identical to the HPD code in the HDMI connector driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Do not try to init the fbdev if either num_crtcs or num_connectors is 0.
In this case we do not have display so the fbdev init would fail anyways.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
assigns the return value to priv->fbdev. This is slightly confusing.
Clean this up by removing the omap_fbdev_init() return value, as we
don't care whether fbdev init succeeded or not. Also change omap_drv.c
to call omap_fbdev_free() always, and omap_fbdev_free() does the check
if fbdev was initialized.
While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
match the "init" counterpart.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If we have no crtcs/connectors, fbdev init goes fine, but
omap_fbdev_create() is never called. This means that omap_fbdev->bo is
NULL and omap_fbdev_free() crashes.
Add a check to omap_fbdev_free() to handle the NULL case.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fix sparse warning:
drivers/gpu/drm/omapdrm/omap_fbdev.c:83:9: warning: Initializer entry defined twice
drivers/gpu/drm/omapdrm/omap_fbdev.c:91:10: also defined here
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix sparse warning:
drivers/gpu/drm/omapdrm/dss/dispc.c:387:9: warning: context imbalance in 'mgr_fld_write' - different lock contexts for basic block
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The venc private data structure is currently stored as a global
variable. While no platform with multiple VENC encoders currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The sdi private data structure is currently stored as a global
variable. While no platform with multiple SDI encoders currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The omap_hdmi private data structure is currently stored as a global
variable. While no platform with multiple HDMI5 encoders currently
exists nor is planned, this doesn't comply with the kernel device model
and should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The omap_hdmi private data structure is currently stored as a global
variable. While no platform with multiple HDMI4 encoders currently
exists nor is planned, this doesn't comply with the kernel device model
and should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dispc private data structure is currently stored as a global
variable. While no platform with multiple DISPC currently exists
nor is planned, this doesn't comply with the kernel device model and
should thus be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Remove the global dispc ops variable by storing it in the dss_device
structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_device is the top-level component in the omapdss driver. Give
the omapdrm driver access to the dss_device pointer in order to obtain
pointers to all other components from it. This requires a new global
variable in the omapdss driver that will be removed when merging the
omapdrm and omapdss drivers, but will already allow removal of several
other global variables.
As this partly duplicates the omapdss_is_initialized() API, reimplement
it as an inline function wrapping omapdss_get_dss().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_mgr_ops operations implemented by the omapdrm side have to look
up the omap_crtc objects from global variables as they are only passed a
channel number. In order to remove global variables in the omapdrm
driver pass the omap_drm_private pointer to the dss_mgr_ops. This
requires storing a pointer to the omap_drm_private in a global variable
on the DSS side as a temporary measure until the omapdrm and omapdss
drivers get merged.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_mgr_*() functions take a channel argument to identify the
channel they operate on. This prevents the functions from accessing
driver data structures without resorting to global variables. In an
effort to remove global variables, pass the omap_dss_device pointer
associated with the channel instead. This will be used to look up the
omap_drm_private data structure to pass to the dss_mgr_ops.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_display_init_dispc() and dsi_display_uninit_dispc() functions
take a channel argument that is reduntant as it is always identical to
the dsi->output.dispc_channel. Remove the argument and use the field
directly in the functions to avoid misuse.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_data structure stores a pointer to a struct platform_device. The
driver only uses the dev member of the platform device structure. Store
the struct device pointer instead and use it directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_bind() function receives a pointer to a struct device that it
casts to a struct platform_device, only to use the platform device's dev
field through the code. Use the dev pointer directly.
While at it rename the struct platform_device pointer dsidev to pdev to
make it more explicit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dsi_get_dsidrv_data() and dsi_get_dsidev_from_dssdev() inline
functions convert a struct omap_dss_device pointer to the corresponding
struct platform_device, and a struct platform_device pointer to the
corresponding struct dsi_data. They are nearly always called together
without any use of the intermediate platform_device, so combine them
into a single function.
In the three locations where only dsi_get_dsidrv_data() is used, call
dev_get_drvdata() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Internal dsi functions take a pointer to the DSI platform_device and
then cast it to a dsi_data pointer. That's pointless as the caller
already has the dsi_data pointer. Pass it directly instead of the
platform_device pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The dss_unbind() function casts the struct device pointer to a struct
platform_device, only to later use the struct device pointer from
platform_device. Don't cast at all.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
As part of an effort to remove the usage of global variables in the
driver, store the debugfs root directory in the dss_device structure
instead of a global variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
As part of an effort to remove the usage of global variables in the
driver, store the registered plls array in the dss_device structure
instead of a global variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To simplify implementation of debugfs seq_file show handlers, the driver
passes the pointer to the show function through the debugfs_create_file
data pointer. This prevents using the pointer to pass driver private
data to the show handler, and requires all handlers to use global
variables to access private data.
To prepare for the removal of global private data in the driver, rework
the debugfs infrastructure to allow passing a private data pointer to
show handlers.
The price to pay is explicit removal of debugfs files to free the
internally allocated memory. This is desirable anyway as debugfs entries
should be removed when a component driver is unbound, otherwise crashes
will occur due to access to freed memory when the components will be
dynamically allocated instead of stored in global variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The DSS private data structure is currently stored as a global variable.
While no platform with multiple DSS devices currently exists nor is
planned, this doesn't comply with the kernel device model and should
thus be fixed.
Allocate the DSS private data structure dynamically for each DSS
instance and remove the global variable. All code that need access to
the structure now retrieves it dynamically so we can remove the global
variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This removes the need to access the global DSS private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DSS device dynamically).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This will allow accessing the PLL data to get the DSS device pointer,
removing the need to access the global DSS private data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To prepare for the removal of the global variable storing DSS private
data, pass its pointer to the dss_runtime_{get,put}() functions.
As this requires getting hold of the dss_device structure in the
callers, we add a new dss_get_device() function to retrieve it. The
function currently returns a pointer to the global data structure, and
will later be updated to get the pointer from device driver data when
the DSS private structure will be allocated dynamically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The anoonymous dss structure in dss.c is the top-level component in the
omapdss driver. As such it should store all internal instance-specific
data that is currently stored in global variables. This however requires
both naming the structure to pass it around functions, and accessing it
from various locations in the omapdss driver. While we could implement
get and set functions for every field that needs to be accessed outside
of dss.c, that would introduce overhead and complexity that we could
avoid by exposing the structure to internal components of the omapdss
driver. Do so to prepare for removal of global variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
When merging the omapdrm and omapdss drivers there will be not omapdrm
platform device anymore, and thus no associated probe and remove
functions. To prepare for that, split all the initialization code from
the probe function to make it usable without a platform device.
Similarly, split the cleanup code from the remove function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The wait_for_bit_change() function returns the value of the bit it
polls. This requires the caller to compare the return value to the
expected bit value. As all the existing callers need is to check whether
the bit has reached the expected value, it's easier to return a boolean
status from the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_register_driver(), omap_dss_unregister_driver() and
dispc_enable_gamma_table() functions don't exist anymore, remove their
prototypes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is unused, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no reason to delay initialization of most of the driver (such as
mapping memory I/O, getting clocks or enabling runtime PM) to the
component master bind handler.
This additionally fixes a real PM issue caused enabling runtime PM in
the bind handler.
The bind handler performs the following sequence of PM operations:
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
... (access the hardware to read the device revision) ...
pm_runtime_put_sync(dev);
If a failure occurs at this point, the error path calls
pm_runtime_disable() to balance the pm_runtime_enable() call.
To understand the problem, it should be noted that the bind handler is
called when one of the component registers itself, which happens in the
component's probe handler. Furthermore, as the components are children
of the DSS, the device core calls pm_runtime_get_sync() on the DSS
platform device before calling the component's probe handler. This
increases the DSS power usage count but doesn't runtime resume the
device, as runtime PM is disabled at that point.
The bind handler is thus called with runtime PM disabled, with the
device runtime suspended, but with the power usage count larger than 0.
The pm_runtime_get_sync() call will thus further increase the power
usage count and runtime resume the device. The pm_runtime_put_sync()
handler will decrease the power usage count to a non-zero value and will
thus not suspend the device. Finally, the pm_runtime_disable() call will
disable runtime PM, preventing the pm_runtime_put() call in the device
core from runtime suspending the device. The DSS device is thus left
powered on.
To fix this, move the initialization code from the bind handler to the
probe handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A few functions defined in omapdss-base are internal to the module.
Don't export them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function isn't used outside of its compilation unit, make it static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoder drivers need a handle to the source they are connected to in
order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connector drivers need a handle to the source they are connected to
in order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The connector drivers need a handle to the source they are connected to
in order to control the source.
All drivers get that handle at probe time, resulting in probe deferral
when the source hasn't been probed yet. However they don't need the
handle until their connect handler is called.
Move retrieval of the source handle to the connect handler to avoid
probe deferrals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No panel is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No encoder is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
No connector is instantiated through platform data anymore, there is no
need to check for OF node presence.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The tvc_of_match variable is never referenced before its definition.
Remove the forward declaration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The kernel favours 'unsigned int' over plain 'unsigned'. Replace all
occurences of the latter by the former. This avoid lots of checkpatch
complaints in patches that touch lines where a plain 'unsigned' is used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The standard kernel integer types are [us]{8,16,32}. Use them instead of
the u?int{8,16,32}_t types.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
The omap4 CEC hardware cannot tell a Nack from a Low Drive from an
Arbitration Lost error, so just report a Nack, which is almost
certainly the reason for the error anyway.
This also simplifies the implementation. The only three interrupts
that need to be enabled are:
Transmit Buffer Full/Empty Change event: triggered when the
transmit finished successfully and cleared the buffer.
Receiver FIFO Not Empty event: triggered when a message was received.
Frame Retransmit Count Exceeded event: triggered when a transmit
failed repeatedly, usually due to the message being Nacked. Other
reasons are possible (Low Drive, Arbitration Lost) but there is no
way to know. If this happens the TX buffer needs to be cleared
manually.
While testing various error conditions I noticed that the hardware
can receive messages up to 18 bytes in total, which exceeds the legal
maximum of 16. This could cause a buffer overflow, so we check for
this and constrain the size to 16 bytes.
The old incorrect interrupt handler could cause the CEC framework to
enter into a bad state because it mis-detected the "Start Bit Irregularity
event" as an ARB_LOST transmit error when it actually is a receive error
which should be ignored.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Henrik Austad <haustad@cisco.com>
Tested-by: Henrik Austad <haustad@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Currently, calls into each file are used to register the various
platform drivers. Change this to a table of pointers to platform_driver
structs to allow using platform_register_drivers.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Having the filename in the header serves little purpose and is
often wrong after renames as it is here in several places, just
drop it from all omapdrm files.
While we are here unify the copyright tags to the TI recommended style.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.
The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To help diagnose DMM errors, print out information if any of the error bits
are set in the interrupt status register.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the wait_status() fails either because of an error reported in the
STATUS register or because of a timeout waiting for the wait_mask, print
information which might help diagnose the reason.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The error bit definitions are typoed in DMM_IRQSTAT_ERR_MASK which went
unnoticed since the DMM_IRQSTAT_ERR_MASK was not used.
Change the bit definitions to the correct ones.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The number of function declarations in the omap_drv.h degrades
readability. To fix it, create new header files for each part of the
driver and move the related functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The venc_probe_of() function has an error cleanup path that returns
success instead of an error code. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dpi_data structure port_initialized field is used to check in the
cleanup path whether the DPI has been initialized. This can be performed
through the associated device_node data field instead. Remove the
port_initialized field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function isn't used outside of its compilation unit, make it static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When merging the omapdrm and omapdss drivers the omapdrm virtual
platform device will disappear, and the omapdss platform device will be
used for DMA memory allocation. To prepare for that, set the DMA
coherent mask for the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_find_device() function is unused. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_gem_resume() function is internal to the driver. Pass it a
drm_device pointer that the caller already has instead of looking it up
from device data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no need to print an error message on probe deferral, that's a
normal situation. Probe deferral debugging can be performed by enabling
the related debug messages in the drivers core.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the new descriptor based GPIO API instead of
the legacy one, which results in cleaner code
with less lines of code.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Droid 4 has a command mode DSI panel, which does not have/use
DSI based backlight support. This adds proper support for this
using a backlight phandle property, which follows the common
panel binding.
If no backlight phandle is found, it is assumed, that the
native backlight should be used instead. This is used by
the Nokia N950.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add support to load physical size information from DT using
the properties defined by the common panel binding.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add support for regulators used by panels found inside
of the Nokia N950, N9 and Motorola Droid 4.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This adds support for get_timings() and check_timings()
to get the driver working and properly initializes the
timing information from DT.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
While physical size information is automatically parsed for EDID
based displays, we need to provide it manually for displays providing
one fixed mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The wrappers have been removed in commit 5a35876e28
(drm: omapdrm: Remove manual update display support)
and will not be reintroduced, since the normal sys
functions properly call the dirty callback.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Remove driver (un)register API defines. They do not even exist
anymore.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If we have memory bandwidth limit configured, reject the modes which would
require more bandwidth than the limit if it is used with one full
resolution plane (most common use case).
This filtering is not providing full protection as it is possible that
application would pick smaller crtc resolution with high resolution planes
and down scaling, or can enable more smaller planes where the sum of their
bandwidth need would be higher than the limit.
This patch only allows us to filter out modes which would need more
bandwidth if they were used with one full screen plane.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The get_memory_bandwidth_limit() in dispc_ops can be used to query the
memory bandwidth limit of dispc by upper layers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
to make it easier to keep in sync with the OF device table.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The vendor name was "toppoly" but other panels and the vendor list
have defined it as "tpo". So let's fix it in driver and bindings.
We keep the old definition in parallel to stay compatible with
potential older DTB setup.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-9-noralf@tronnes.org
"ret" needs to be signed for the error handling to work.
Fixes: 8d7f934df8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Commit d178e034d5 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature
to dpi code") replaced usage of platform data version with SoC matching
to configure DPI VDDS. The SoC match entries were incorrect, they should
have matched on the machine name instead of the SoC family. Fix it.
The result was observed on OpenPandora with OMAP3530 where the panel only
had the Blue channel and Red&Green were missing. It was not observed on
GTA04 with DM3730.
Fixes: d178e034d5 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org # 4.14
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
I believe the intention of the commit 2c9fc9bf45
("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions,
like omap4460.
By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a
same way as it would treat omap4430 ES1.x
This breaks HDMI audio on OMAP4460 devices (PandaES for example).
Correct the match rule so we are not going to get false positive match.
Fixes: 2c9fc9bf45 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
Cc: stable@vger.kernel.org # 4.14
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The new backlight code causes a link failure when backlight
support itself is disabled:
drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'
This adds a Kconfig dependency like we have for the other OMAP
display targets.
Fixes: 39135a305a ("drm/omap: displays: panel-dpi: Support for handling backlight devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.
Fixes: 7cb0d6c17b ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:
init_timer(&t);
f.function = timer_callback;
t.data = timer_callback_arg;
to be converted into:
setup_timer(&t, timer_callback, timer_callback_arg);
The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
- assignments-before-init_timer() cases
- limit the .data case removal to the specific struct timer_list instance
- handling calls by dereference (timer->field vs timer.field)
spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/setup_timer.cocci
@fix_address_of@
expression e;
@@
init_timer(
-&(e)
+&e
, ...)
// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.
@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
... when != func = e2
when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
when != da = e3
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@r1 exists@
expression t;
identifier f;
position p;
@@
f(...) { ... when any
init_timer@p(\(&t\|t\))
... when any
}
@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@
g(...) { ... when any
\(t.data\|t->data\) = e8
... when any
}
// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@
cocci.include_match(False)
@r3@
expression r1.t, func, e7;
position r1.p;
@@
(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CEC framework needs to know when the hotplug detect signal
disappears, since that means the CEC physical address has to be
invalidated (i.e. set to f.f.f.f).
Add a lost_hotplug op that is called when the HPD signal goes away.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Hook up the HDMI CEC support in the hdmi4 driver.
It add the CEC irq handler, the CEC (un)init calls and tells the CEC
implementation when the physical address changes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add the source and header for the OMAP4 HDMI CEC support.
This code is not yet hooked up, that will happen in the next patch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The hdmi_power_on/off_core functions can be called multiple times:
when the HPD changes and when the HDMI CEC support needs to power
the HDMI core.
So use a counter to know when to really power on or off the HDMI core.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Call hdmi4_core_powerdown_disable() in hdmi_power_on_core() to
power up the HDMI core (needed for CEC). The same call can now be dropped
in hdmi4_configure().
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Pass struct omap_hdmi to the irq handler since it will need access
to hdmi.core.
Do not clear the IRQ_HDMI_CORE bit: that will be controlled by the
HDMI CEC code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Three low-level functions in hdmi4.c and hdmi4_core.c are
made available for use by the OMAP4 CEC support.
Renamed the prefix to hdmi4 since these are OMAP4 specific.
These function deal with the HDMI core and are needed to
power it up for use with CEC, even when the HPD is low.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Extend the hdmi_core_data struct with the additional fields needed
for CEC.
Also fix a simple typo in a comment.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
For OMAP4 CEC support the CEC pin should always be on. So keep
ls_oe_gpio high all the time in order to support CEC.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Seems that on omap3 enabling a crtc without any planes causes a sync
lost flood. This only happens on the first enable, and after that it
works. This looks like an HW issue and it's unclear why this is
happening or how to fix it.
This started happening after 897145d0c7
("drm/omapdrm: Move commit_modeset_enables() before commit_planes()")
which, as a work-around, changed omapdrm first to do the modeset enable,
and plane set only after that. This WA should be fine on all DSS
versions, but apparently OMAP3 DSS is an exception.
This patch reverts that work-around for OMAP3 DSS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
7d267f068a ("drm/omap: work-around for
errata i886") changed how the PLL dividers and multipliers are
calculated. While the new way should work fine for all the PLLs, it
breaks omap5 PLLs. The issues seen are rather odd: seemed that the
output clock rate is half of what we asked. It is unclear what's causing
there issues.
As a work-around this patch adds a "errata_i886" flag, which is set only
for DRA7's PLLs, and the PLL setup is done according to that flag.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
omapdrm rejects all venc (analog tv-out) videomodes, due to somewhat
strict checking of the values, making tv-out unusable.
We only support two videomodes, one for PAL and one for NTSC, so instead
of trying to check every field in the videomode struct, this patch makes
the driver check only the pixel clock and the size of the display.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the kmalloc() fails then we dereference "state" when we set
"state->zpos".
Fixes: 3dfeb631a1 ("drm/omap: Rework the rotation-on-crtc hack")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver sets crtc and plane rotation properties back to 0 degrees in
dev_lastclose() using drm_object_property_set_value().
drm_object_property_set_value() doesn't do anything with atomic drivers,
and a recent change added WARN_ON() when atomic driver calls the
function.
So remove the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that creating the omapdrm device from the platform code has been
removed, we can rename the omapdrm device back to "omapdrm".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss driver (not to be confused with the omapdss_dss driver) is
now a dummy driver with empty probe and remove functions. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm platform device is a virtual device created for the sole
purpose of handling the omapdss/omapdrm driver split. It should
eventually be removed. As a first step to ease refactoring move its
registration from platform code to driver code.
The omapdrm driver name must be changed internally to avoid probing both
the device registered in platform code and the device registered in the
omapdss driver, as that would otherwise break bisection.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no need to allocate memory dynamically to duplicate the contents
of a const structure, only to store the memory pointer in a const
pointer field. Just use the original structures directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP4 and OMAP5 HDMI PHYs have different properties that require
specific handling in the HDMI PHY driver. This needs knowledge of the
PHY version, which is currently inferred from the DSS version. As part
of the effort to remove usage of the DSS version, use the HDMI
controller version instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP4 and OMAP5 PLLs have different properties that require specific
handling in the HDMI PLL driver. This needs knowledge of the PLL
version, which is currently inferred from the DSS version. AS part of
the effort to remove usage of the DSS version, use the HDMI controller
version instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI wrapper code only needs to differentiate between major OMAP
revisions, which can be obtained from the HDMI transmitter compatible
string. Replace the OMAP SoC model checks to prepare for removal of the
OMAP SoC version platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dsi_pll_ops structure and dsi_init_pll_data() function incorrectly
use a dsi_ prefix, likely due to copy & paste. Fix it by using the
correct hdmi_ prefix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We are missing OMAP5 DSIPHY lane-enable support, which has prevented
OMAP5 DSI working in mainline. This patch adds the lane-enable similarly
to the recently added OMAP4 version.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Use regmap_update_bits instead of regmap_read/write, which simplifies
the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The header file only contains four macros, two of which are never used.
Move the other two to dss.h and remove dss_features.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The supported outputs feature is specific to the DSS, move it from the
omap_dss_features structure to the dss driver.
The omap_dss_features structure is now empty and can be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSS_FCK feature is specific to the DSS, move it from the
omap_dss_features structure to the dss driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSS_PCD, FEAT_PARAM_LINEWIDTH and FEAT_PARAM_DOWNSCALE
features are specific to the DISPC, move them from the omap_dss_features
structure to the dispc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_PARAM_DSI* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
All the remaining FEAT_* features are specific to the DISPC, move them
from the omap_dss_features structure to the dispc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_LCD_CLK_SRC feature is specific to the DSS, move it from the
omap_dss_features structure to the dss_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_DPI_USES_VDDS_DSI feature is specific to the DPI, move it from
the omap_dss_features structure to the dpi code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_HDMI_* features are specific to the HDMI4, move them from the
omap_dss_features structure to the hdmi4 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_DSI_* features are specific to the DSI, move them from the
omap_dss_features structure to the dsi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The FEAT_VENC_REQUIRES_TV_DAC_CLK is specific to the VENC, move it from
the omap_dss_features structure to the venc driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The reg_fields feature describes DISPC registers only. Move it from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The register belongs to the DSS, move the feature to the dss_features
structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The num_ovls and num_mgrs are dispc features. Move them from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The overlay_caps is a dispc feature. Move it from the omap_dss_features
structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The supported_color_modes is a dispc feature. Move it from the
omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The buffer_size_unit and burst_size_unit are dispc features. Move them
from the omap_dss_features structure to the dispc_features structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In preparation for removal of the core module, move the shutdown()
handler from core to dss.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
debugfs code is spread between the core and dss drivers. In preparation
for removal of the core driver, move it all to the dss driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSS internal features are derived from the platform device
compatible string which is available at probe time. Don't delay
initialization until bind time. This prepares for the merge of the two
DSS features structures that will be needed before the DSS is bound.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dss driver uses the supported display types to check whether the DSS
has SDI, VENC or HDMI outputs. We can instead use the supported outputs
the provide the same information. This removes the last use of the
supported display types, that we can then remove as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the compatible string instead of the OMAP SoC revision to determine
device features. The various OMAP3-based SoCs can't be told apart using
the compatible string, use soc_device_match() to tell them apart.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DPI code only needs to differentiate between major OMAP revisions,
which can be obtained from the DSS compatible string. Replace the OMAP
SoC model checks to prepare for removal of the OMAP SoC version platform
data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the compatible string instead of the OMAP SoC revision to determine
device features. On OMAP34xx the features depend on the ES revision that
can not be determined from the compatible string. Use soc_device_match()
in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The OMAP implementation of the set_min_bus_tput() API is a no-op.
There's no point in forwarding the driver calls to the platform code.
Remove the use of the related platform data callback, but keep the
internal function as a reminder that the feature will need to be
implemented when the OMAP platform will provide support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Don't rely on callback functions provided by the platform, but access
the syscon internally to mux the DSI pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI PLL hardware data and DSS channels are selected based on the
OMAP SoC model. There's no need for fine-grained model information, as
the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5.
As this can be done through the DSI compatible string, store the
corresponding information in OF match data instead to avoid accessing
the OMAP SoC model.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Move the two function pointers to a new dss_ops structure. This will
allow merging the dss_features and omap_dss_features structures without
having to expose the DPI source selection and LCD clock muxing functions
in header files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
PHY features are stored in a global variable, while they should be
properties of the PHY object. As existing OMAP platforms have a single
HDMI PHY this doesn't cause any issue, but doesn't follow the driver
model.
Move the PHY features to the HDMI PHY data structure to follow the
driver model and pave the road for multiple HDMI PHYs support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The two variables are never used outside of their compilation unit, make
them static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The dpi_display_enable() function ensures that a VDDS_DSI regulator is
available if the DSI uses the VDDS_DSI supply. This is not needed, as a
failure to get the VDDS_DSI supply will result in a probe failure,
dpi_display_enable() will thus never be called in that case.
Remove the check, and replace tests for the FEAT_DPI_USES_VDDS_DSI
feature with a test for the regulator object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As non-DT booting is no longer supported, the only way to instantiate
the device is through an OF node, which is guaranteed to be present.
Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4669 464 0 5133 140d panel-dsi-cm.o
File size After adding 'const':
text data bss dec hex filename
4725 400 0 5125 1405 panel-dsi-cm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5147 560 0 5707 164b panel-sony-acx565akm.o
File size After adding 'const':
text data bss dec hex filename
5211 496 0 5707 164b panel-sony-acx565akm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2673 368 0 3041 be1 panel-tpo-td043mtea1.o
File size After adding 'const':
text data bss dec hex filename
2721 304 0 3025 bd1 panel-tpo-td043mtea1.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
1240 112 0 1352 548 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.o
File size After adding 'const':
text data bss dec hex filename
1352 0 0 1352 548 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The videomode structures are only copied into the vm field of a
panel_drv_data structure, so they can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use interrupt handler for hpd GPIO to react to HPD changes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If the hpd_gpio is valid, use interrupt handler to react to HPD changes.
In case the hpd_gpio is not valid, try to enable hpd detection on the
encoder if it supports it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HPD signal can be used for detecting HDMI cable plug and unplug event
without the need for polling the status of the line.
This will speed up detecting such event because we do not need to wait for
the next poll event to notice the state change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_framebuffer_create() fails to unref all the gem objects if creating
the FB fails, leading to a memory leak.
Fix the loop so that it goes through all the reffed gem objects.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Laurent Pinchart