OpenCloudOS-Kernel

Commit Graph

Author	SHA1	Message	Date
Jernej Skrabec	cb54fbd21a	clk: sunxi-ng: Add maximum rate constraint to NM PLLs On some NM PLLs, frequency can be set above PLL working range. Add a constraint for maximum supported rate. This way, drivers can specify which is maximum allowed rate for PLL. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-08-27 09:18:01 +02:00
Rongyi Chen	58c0f79887	clk: sunxi-ng: h6: fix PWM gate/reset offset Currently the register offset of the PWM bus gate in Allwinner H6 clock driver is wrong. Fix this issue. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Rongyi Chen <chenyi@tt-cool.com> [Icenowy: refactor commit message] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>	2018-08-27 10:35:04 +08:00
Icenowy Zheng	2852bfbf4f	clk: sunxi-ng: h6: fix bus clocks' divider position The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>	2018-08-27 10:35:03 +08:00
Linus Torvalds	f3ea496213	ARM: SoC driver updates Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+MMkPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3pB4QAIj7iVxSKEQFz65iXLTfMJKFZ9TSvRgWSDyE CHF+WOQGTnxkvySEHSw/SNqDM+Bas8ijR8b4vWzsXJFB+3HA0ZTGLU379/af1zCE 9k8QjyIWtRWKX9fo7qCHVXlMfxGbOdbCOsh4jnmHqEIDxCHXpIiJRfvUbKIXGpfn tw6QpM70vm6Q6AdKwzmDbMCYnQAMWxBK/G/Q7BfRG+IYWYjFGbiWIc9BV9Ki8+nE 3235ISaTHvAHodoec8tpLxv34GsOP4RCqscGYEuCf22RYfWva4S9e4yoWT8qPoIl IHWNsE3YWjksqpt9rj9Pie/PycthO4E4BUPMtqjMbC2OyKFgVsAcHrmToSdd+7ob t3VNM6RVl8xyWSRlm5ioev15CCOeWRi1nUT7m3UEBWpQ6ihJVpbjf1vVxZRW/E0t cgC+XzjSg26sWx1bSH9lGPFytOblAcZ04GG/Kpz02MmTgMiTdODFZ67AsqtdeQS7 a9wpaQ+DgTqU0VcQx8Kdq8uy9MOztkhXn5yO8fEWjpm0lPcxjhJS4EpN+Ru2T7/Z AMuy5lRJfQzAPU9kY7TE0yZ07pgpZgh7LlWOoKtGD7UklzXVVZrVlpn7bApRN5vg ZLze5OiEiIF5gIiRC8sIyQ9TZdvg4NqwebCqspINixqs7iIpB7TG93WQcy82osSE TXhtx4Sy =ZjwY -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...	2018-08-23 13:52:46 -07:00
Linus Torvalds	9e259f9352	ARM: 32-bit SoC platform updates Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+Lh0PHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3Y+YP/2QVT1T1/Fz3WsuLg7BYa6r51BDxvr/pSQKh eqLhZCcI5RpOlW4noWgJXWqnX2AlR1vX6xe0W0ebj177ttUHmidUQUJCpwP39AGE LrVC2+mlFb3uPx0HlpHsx3zFZdNFfrhl5mN3JbZfnLv0fUibVEhR+K8ii7MV1/Fk Lbo9sVPT8GIJuU6uyTTUnsCufwCkARMhrYbO6cbtS0FCO77a5aHp7btvHZ2ykxwh hG9CI3FhfAP3Tkpm+IbHkC5jYQNRewQoqthzJ4WJbRrcdA/vaArBTOUoZG4NFMOM M3B4jd1x26llmQhUqH4kGeOZiQ714GPrKcGS+8w7Twj5sIRGDxpif2Ac0kKL2B8X Ps6UTM0cb63W9I+TphjLysKSarNjR2lVVhNVoJ8P47MSyDGIRpSR7+IWvlJ7U8vz 1yMWCguwrwZH3DnQb8UINTfI1Y1RstmtO5v8paSqfJyFX5r64x6VfYso1fRzxyFE 4r2TS0HRv117aKkHwY8smjielZ0CpGnyEDQgq9Z72V4FueIqsJQrA3oGYXgTArFl mLL+fJUdwPv00nWuAZ8q0wIj1NvJvksJy+cObZXL6HK9m3cSdYwOHipdG86k20S5 6/KMPmgrMbV9YO3lVtfJZjdu2QTBiYVBPGfsiSo5lVL5Q5rDYV9QBijnE+9W9/yT tJ038MhK =ACVk -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...	2018-08-23 13:44:43 -07:00
Linus Torvalds	db06f826ec	The new and exciting feature this time around is in the clk core. We've added duty cycle support to the clk API so that clk signal duty cycle ratios can be adjusted while taking into account things like clk dividers and clk tree hierarchy. So far only one SoC has implemented support for this, but I expect there will be more to come in the future. Outside of the core, we have the usual pile of clk driver updates and additions. The Amlogic meson driver got the most lines in the diffstat this time around because it added support for a whole bunch of hardware and duty cycle configuration. After that the Rockchip PX30, Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff. We're left with the collection of non-critical fixes after that. Overall it looks pretty quiet this time. Core: - Clk duty cycle support - Proper CLK_SET_RATE_GATE support throughout the tree New Drivers: - Actions Semi Owl series S700 SoC clk driver - Qualcomm SDM845 display clock controller - i.MX6SX ocram_s clk support - Uniphier NAND, USB3 PHY, and SPI clk support - Qualcomm RPMh clk driver - i.MX7D mailbox clk support - Maxim 9485 Programmable Clock Generator - Expose 32 kHz PLL on PXA SoCs - imx6sll GPIO clk gate support - Atmel at91 I2S audio clk support - SI544/SI514 clk on/off support - i.MX6UL GPIO clock gates in CCM CCGR - Renesas Crypto Engine clocks on R-Car H3 - Renesas clk support for the new RZ/N1D SoC - Allwinner A64 display engine clock support - Support for Rockchip's PX30 SoC - Amlogic Meson axg PCIe and audio clocks - Amlogic Meson GEN CLK on gxbb, gxl and axg Updates: - Remove an unused variable from Exynos4412 ISP driver - Fix a thinko bug in SCMI clk division logic - Add missing of_node_put()s in some i.MX clk drivers - Tegra SDMMC clk jitter improvements with high speed signaling modes - SPDX tagging for qcom and cs2000-cp drivers - Stop leaking con ids in __clk_put() - Fix a corner case in fixed factor clk probing where node is in DT but parent clk is registered much later - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value - i.MX clk init arrays removed in place of CLK_IS_CRITICAL - Convert to CLK_IS_CRITICAL for i.MX51/53 driver - Fix Tegra BPMP driver oops when xlating a NULL clk - Proper default configuration for vic03 and vde clks on Tegra124 - Mark Tegra memory controller clks as critical - Fix array bounds clamp in Tegra's emc determine_rate() op - Ingenic i2s bit update and allow UDC clk to gate - Fix name of aspeed SDC clk define to have only one 'CLK' - Fix i.MX6QDL video clk parent - Critical clk markings for qcom SDM845 - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents - Mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlt0WD0RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSX5jBAAlMLb0fqnuAGNJeXZDk5rsCa496LMyGWx ku7uLA2H68SlbSQqq8FUPoCjDZkmsu2CbOX1U2/H4HFDS0pqpPiV3mZNtSeacedp 4Wf8yUB5G3xdq9QUCSX5LxMmEQoGeJ+gaTspBvM6sNvEMBR2kEMGBqUy768tnDTR qCQ8Q1jOU6l8IdFV0SZGssmZ+oFqOyQoJVquPWPkw1+p/2f1KyYIyG5J5FXGxgcR 1XQITY/I/dShQ2wd+ZeDdt+GjZqIXQ06Pt3ruRG7HVP79Zt1XCRJd5dZ2lf+Wj8T 1ul3TWCAMYZ8gCPebLMbBGzKvQJQJcDU6DpIZsrUDN+C6z7KCS9vqeCxP9cF+3jJ LOmA6cWE7z9Vkk9s0I0KJJ2Sw7wRoXzE5OJcwa/yousSz3s9cX+F8SAkdZs77oUF 0XnzPsvwdHI/egQ4UrsStPHM/gOFhsQqo8vvm5xaaTR2AxLKBHuPa9oUv9YpO/P5 J6FCst3qeY3Wp69fJ5/Z058OFOAt81dKXij2fZJBOO4KJy7Kse8Sz5ApybXVAbY5 lfvx+KGMITFqLYrcRIQZmlCuoHcMwI0FtHr9Ens5GXdbrJ+W+FlvP43eLCA0ZmRx 9DidemChj3k3PC3H6tbax/jzV4IIxZdyUoBJ1imL4uyhhaXp/qr45A/aGwNp8Q8a WvkIGm3epK4= =Mcn+ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The new and exciting feature this time around is in the clk core. We've added duty cycle support to the clk API so that clk signal duty cycle ratios can be adjusted while taking into account things like clk dividers and clk tree hierarchy. So far only one SoC has implemented support for this, but I expect there will be more to come in the future. Outside of the core, we have the usual pile of clk driver updates and additions. The Amlogic meson driver got the most lines in the diffstat this time around because it added support for a whole bunch of hardware and duty cycle configuration. After that the Rockchip PX30, Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff. We're left with the collection of non-critical fixes after that. Overall it looks pretty quiet this time. Core: - Clk duty cycle support - Proper CLK_SET_RATE_GATE support throughout the tree New Drivers: - Actions Semi Owl series S700 SoC clk driver - Qualcomm SDM845 display clock controller - i.MX6SX ocram_s clk support - Uniphier NAND, USB3 PHY, and SPI clk support - Qualcomm RPMh clk driver - i.MX7D mailbox clk support - Maxim 9485 Programmable Clock Generator - expose 32 kHz PLL on PXA SoCs - imx6sll GPIO clk gate support - Atmel at91 I2S audio clk support - SI544/SI514 clk on/off support - i.MX6UL GPIO clock gates in CCM CCGR - Renesas Crypto Engine clocks on R-Car H3 - Renesas clk support for the new RZ/N1D SoC - Allwinner A64 display engine clock support - support for Rockchip's PX30 SoC - Amlogic Meson axg PCIe and audio clocks - Amlogic Meson GEN CLK on gxbb, gxl and axg Updates: - remove an unused variable from Exynos4412 ISP driver - fix a thinko bug in SCMI clk division logic - add missing of_node_put()s in some i.MX clk drivers - Tegra SDMMC clk jitter improvements with high speed signaling modes - SPDX tagging for qcom and cs2000-cp drivers - stop leaking con ids in __clk_put() - fix a corner case in fixed factor clk probing where node is in DT but parent clk is registered much later - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value - i.MX clk init arrays removed in place of CLK_IS_CRITICAL - convert to CLK_IS_CRITICAL for i.MX51/53 driver - fix Tegra BPMP driver oops when xlating a NULL clk - proper default configuration for vic03 and vde clks on Tegra124 - mark Tegra memory controller clks as critical - fix array bounds clamp in Tegra's emc determine_rate() op - Ingenic i2s bit update and allow UDC clk to gate - fix name of aspeed SDC clk define to have only one 'CLK' - fix i.MX6QDL video clk parent - critical clk markings for qcom SDM845 - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits) clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: cs2000-cp: convert to SPDX identifiers clk: scmi: Fix the rounding of clock rate clk: qcom: Add display clock controller driver for SDM845 clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() clk: imx: add ocram_s clock for i.mx6sx clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent ...	2018-08-15 21:41:21 -07:00
Stephen Boyd	ac7da1b787	Merge branches 'clk-actions-s700', 'clk-exynos-unused', 'clk-qcom-dispcc-845', 'clk-scmi-round' and 'clk-cs2000-spdx' into clk-next * clk-actions-s700: : - Actions Semi Owl series S700 SoC clk driver clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency * clk-exynos-unused: : - Remove an unused variable from Exynos4412 ISP driver clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable * clk-qcom-dispcc-845: : - Qualcomm SDM845 display clock controller clk: qcom: Add display clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Display clock bindings clk: qcom: Move frequency table macro to common file * clk-scmi-round: : - Fix a thinko bug in SCMI clk division logic clk: scmi: Fix the rounding of clock rate * clk-cs2000-spdx: clk: cs2000-cp: convert to SPDX identifiers	2018-08-14 23:00:15 -07:00
Stephen Boyd	032405a754	Merge branches 'clk-imx6-ocram', 'clk-missing-put', 'clk-tegra-sdmmc-jitter', 'clk-allwinner' and 'clk-uniphier' into clk-next * clk-imx6-ocram: : - i.MX6SX ocram_s clk support clk: imx: add ocram_s clock for i.mx6sx * clk-missing-put: : - Add missing of_node_put()s in some i.MX clk drivers clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() * clk-tegra-sdmmc-jitter: : - Tegra SDMMC clk jitter improvements with high speed signaling modes clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() * clk-allwinner: clk: sunxi-ng: add A64 compatible string dt-bindings: add compatible string for the A64 DE2 CCU clk: sunxi-ng: r40: Export video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Add minimal rate for video PLLs * clk-uniphier: : - Uniphier NAND, USB3 PHY, and SPI clk support clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock	2018-08-14 22:58:53 -07:00
Stephen Boyd	4a18ef5bab	Merge branches 'clk-qcom-rpmh', 'clk-qcom-spdx', 'clk-con-id-leak', 'clk-fixed-factor-populated' and 'clk-mvebu-periph-parent' into clk-next * clk-qcom-rpmh: : - Qualcomm RPMh clk driver clk: qcom: clk-rpmh: Add QCOM RPMh clock driver * clk-qcom-spdx: : - SPDX tagging for qcom clk: qcom: Update SPDX headers for common files * clk-con-id-leak: : - Stop leaking con ids in __clk_put() clk: core: Potentially free connection id * clk-fixed-factor-populated: : - Fix a corner case in fixed factor clk probing where node is in DT but : parent clk is registered much later clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure * clk-mvebu-periph-parent: : - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent	2018-08-14 22:58:49 -07:00
Stephen Boyd	d16adaf0b9	Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30	2018-08-14 22:58:45 -07:00
Stephen Boyd	139054634b	Merge branches 'clk-imx-critical', 'clk-tegra-bpmp', 'clk-tegra-124', 'clk-tegra-critical' and 'clk-tegra-emc-oob' into clk-next * clk-imx-critical: : - Convert to CLK_IS_CRITICAL for i.MX51/53 driver clk: imx51-imx53: Include sizes.h to silence compile errors clk: imx51-imx53: Annotate critical clocks as CLK_IS_CRITICAL * clk-tegra-bpmp: : - Fix Tegra BPMP driver oops when some xlating a NULL clk clk: tegra: bpmp: Don't crash when a clock fails to register * clk-tegra-124: : - Proper default configuration for vic03 and vde clks on Tegra124 clk: tegra: Make vde a child of pll_c3 clk: tegra: Make vic03 a child of pll_c3 * clk-tegra-critical: : - Mark Tegra memory controller clks as critical clk: tegra: Mark Memory Controller clock as critical * clk-tegra-emc-oob: : - Fix array bounds clamp in Tegra's emc determine_rate() op clk: tegra: emc: Avoid out-of-bounds bug	2018-08-14 22:58:42 -07:00
Stephen Boyd	ea4f7872c7	Merge branches 'clk-ingenic-fixes', 'clk-max9485', 'clk-pxa-32k-pll', 'clk-aspeed' and 'clk-imx6sll-gpio' into clk-next * clk-ingenic-fixes: : - Ingenic i2s bit update and allow UDC clk to gate clk: ingenic: Add missing flag for UDC clock clk: ingenic: Fix incorrect data for the i2s clock * clk-max9485: : - Maxim 9485 Programmable Clock Generator clk: Add driver for MAX9485 dts: clk: add devicetree bindings for MAX9485 * clk-pxa-32k-pll: : - Expose 32 kHz PLL on PXA SoCs clk: pxa: export 32kHz PLL * clk-aspeed: : - Fix name of aspeed SDC clk define to have only one 'CLK' clk: aspeed: Fix SDCLK name * clk-imx6sll-gpio: : - imx6sll GPIO clk gate support clk: imx6sll: add GPIO LPCGs	2018-08-14 22:58:39 -07:00
Stephen Boyd	b183c6887a	Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next * clk-imx6-video-parent: : - Fix i.MX6QDL video clk parent clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL * clk-qcom-sdm845-criticals: : - critical clk markings for qcom SDM845 clk: qcom: Enable clocks which needs to be always on for SDM845 * clk-renesas: clk: renesas: Renesas R9A06G032 clock driver dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation dt-bindings: clock: Add the r9a06g032-sysctrl.h file clk: renesas: r8a7795: Add CCREE clock clk: renesas: r8a7795: Add CR clock * clk-stratix10-fixes: : - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents clk: socfpga: stratix10: fix the sdmmc_free_clk mux clk: socfpga: stratix10: fix the parents of mpu_free_clk * clk-atmel-i2s: : - Atmel at91 I2S audio clk support clk: at91: add I2S clock mux driver dt-bindings: clk: at91: add an I2S mux clock	2018-08-14 22:58:35 -07:00
Stephen Boyd	5ef7748ba3	Merge branches 'clk-qcom-set-rate-gate', 'clk-core-set-rate-gate', 'clk-core-duty-cycle', 'clk-si-prepare' and 'clk-imx-gpio-gates' into clk-next * clk-qcom-set-rate-gate: clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks * clk-core-set-rate-gate: clk: fix CLK_SET_RATE_GATE with clock rate protection * clk-core-duty-cycle: clk: add duty cycle support * clk-si-prepare: : - SI544/SI514 clk on/off support clk-si514, clk-si544: Implement prepare/unprepare/is_prepared operations * clk-imx-gpio-gates: : - i.MX6UL GPIO clock gates in CCM CCGR clk: imx6ul: remove clks_init_on array clk: imx6ul: add GPIO clock gates dt-bindings: clock: imx6ul: Do not change the clock definition order	2018-08-14 22:58:30 -07:00
Linus Torvalds	747f62305d	sound updates for 4.19 It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAltxhXUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9BPxAAnJyKM2IcfVKanjFZQmM4w1gEM3nt+EBvbOF5 155Mq5ELNLxwwCav0eyoeTVD+mB4UO1y9+64SK73dUzBvj7llILs8s5VNMg7KYn6 MnYMo0UIDlvQ/ZwJzzpU04QZVOIHa5HK9XG+u+Fycr8YOCdhGD6m/zGiBStd/xGd Bvgw2eHF10l+zqN+Vf+1P2/ENRyNxLYpJYYC02zl0nfXP29ZY+CjicDoRvD8/97X Pe5Jcfj/4oJZlN0MMXfLLP0vaWbUyogG3a4mzVRC+wHG2FZ5hGfFb92mfT8Yce3H dq9eaih6zMMiDuP4ipClMv/0t64cA8HD+Du/Enq9Jc/g41QAU1JFzj4qi1Ga7S2w F80uWCedwZ5FLXYAAK2kIunIaaD5phD+8DegzchiVzL6eg7BLmi/Rsfg9VkuC1Ir ZZERtT07XCzwXke0IAQQ1yhTE/uMxqntCJlZ0FoohvIABgH0jvrpp/cdDYFdC3it TaNk9REAuCVjr2ket1Jrw6pKNgtry7cDkKFK5d8S5HTNFEL+sWwz2NcSdPNRIIFT aqeUWt/H1P5G25if/636UJtf+EtlRPqC2Eng8OpY8hitb2vB3trjY25T4a5x5FW5 S4oTyVWmxa4Xxj4QMMhpo7jxxwsux8J1fghDCpEqekiwt72CyVP2UN/cU8HJL7kN IWqnZgg= =eTIC -----END PGP SIGNATURE----- Merge tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been busy summer weeks and hence lots of changes, partly for a few new drivers and partly for a wide range of fixes. Here are highlights: ALSA Core: - Fix rawmidi buffer management, code cleanup / refactoring - Fix the SG-buffer page handling with incorrect fallback size - Fix the stall at virmidi trigger callback with a large buffer; also offloading and code-refactoring along with it - Various ALSA sequencer code cleanups ASoC: - Deploy the standard snd_pcm_stop_xrun() helper in several drivers - Support for providing name prefixes to generic component nodes - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing - Generalization of the DIO2125 support to a simple amplifier driver - Accessory detection support for the audio graph card - DT support for PXA AC'97 devices - Quirks for a number of new x86 systems - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707 HD-audio: - Code refactoring in HD-audio ext codec codes to drop own classes; preliminary works for the upcoming legacy codec support - Generalized DRM audio component for the upcoming radeon / amdgpu support - Unification of mic mute-LED and GPIO support for various codecs - Further improvement of CA0132 codec support including Recon3D - Proper vga_switcheroo handling for AMD i-GPU - Update of model list in documentation - Fixups for another HP Spectre x360, Conexant codecs, power-save blacklist update USB-audio: - Fix the invalid sample rate setup with external clock - Support of UAC3 selector units and processing units - Basic UAC3 power-domain support - Support for Encore mDSD and Thesycon-based DSD devices - Preparation for future complete callback changes Firewire: - Add support for MOTU Traveler Misc: - The endianess notation fixes in various drivers - Add fall-through comment in lots of drivers - Various sparse warning fixes, e.g. about PCM format types" * tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits) ASoC: adav80x: mark expected switch fall-through ASoC: da7219: Add delays to capture path to remove DC offset noise ALSA: usb-audio: Mark expected switch fall-through ALSA: mixart: Mark expected switch fall-through ALSA: opl3: Mark expected switch fall-through ALSA: hda/ca0132 - Add exit commands for Recon3D ALSA: hda/ca0132 - Change mixer controls for Recon3D ALSA: hda/ca0132 - Add Recon3D input and output select commands ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D ALSA: hda/ca0132 - Add Recon3D startup functions and setup ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio ALSA: hda/ca0132 - Add Recon3D pincfg ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D ALSA: hda/ca0132 - Add alt_functions unsolicited response ALSA: hda/ca0132 - Clean up ca0132_init function. ALSA: hda/ca0132 - Create mmio gpio function to make code clearer ASoC: wm_adsp: Make DSP name configurable by codec driver ASoC: wm_adsp: Declare firmware controls from codec driver ASoC: max98373: Added software reset register to readable registers ASoC: wm_adsp: Correct DSP pointer for preloader control ...	2018-08-14 14:10:30 -07:00
Linus Torvalds	c2d9f5bc2d	Merge branch 'clkdev' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM clkdev updates from Russell King: "A couple of cleanups for clkdev" * 'clkdev' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8778/1: clkdev: don't call __of_clk_get_by_name() unnecessarily from clk_get() ARM: 8776/1: clkdev: Remove duplicated negative index check from __of_clk_get()	2018-08-13 19:15:48 -07:00
Bartosz Golaszewski	53ccb22b8d	ARM: 8778/1: clkdev: don't call __of_clk_get_by_name() unnecessarily from clk_get() The way this function is implemented caused some confusion when converting the TI DaVinci platform to using the common clock framework. Current kernel supports booting DaVinci boards both in device tree as well as legacy, board-file mode. In the latter, we always end up calling clk_get_sys() as of_node is NULL and __of_clk_get_by_name() returns -ENOENT. It was not obvious at first glance how clk_get(dev, NULL) will work in board-file mode since we always call __of_clk_get_by_name(). Let's make it clearer by checking if of_node is NULL and skipping right to clk_get_sys(). Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: David Lechner <david@lechnology.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>	2018-08-13 16:27:52 +01:00
Mark Brown	4aa5db22d3	Merge branch 'asoc-4.19' into asoc-next	2018-08-09 14:47:05 +01:00
Levin Du	640332d1a0	clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave from power on and the VDD_LOG is about 0.9V. When the kernel boots normally into the system, the PWM2 keeps outputing PWM signal. But the kernel hangs randomly after "Starting kernel ..." line on that board. When it happens, PWM2 outputs high level which causes VDD_LOG drops to 0.4V below the normal operating voltage. By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array, PWM clock is ensured to be prepared at startup and the PWM2 output is normal. After repeated tests, the early boot hang is gone. This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards. Signed-off-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2018-08-06 23:46:52 +02:00
Kuninori Morimoto	67075b3cb8	clk: cs2000-cp: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-08-02 13:55:00 -07:00
Amit Daniel Kachhap	7a8655e19b	clk: scmi: Fix the rounding of clock rate This fix rounds the clock rate properly by using quotient and not remainder in the calculation. This issue was found while testing HDMI in the Juno platform. Fixes: `6d6a1d82ea` ("clk: add support for clocks provided by SCMI") Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-08-02 13:43:48 -07:00
Taniya Das	81351776c9	clk: qcom: Add display clock controller driver for SDM845 Add support for the display clock controller found on SDM845 based devices. This would allow display drivers to probe and control their clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> [sboyd@kernel.org: Remove CLK_GET_RATE_NOCACHE everywhere] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-08-01 08:08:12 -07:00
Anders Roxell	8927c27b32	clk: mvebu: armada-37xx-periph: Remove unused var num_parents When building armada-37xx-periph, num_parents isn't used in function clk_pm_cpu_get_parent: drivers/clk/mvebu/armada-37xx-periph.c: In function ‘clk_pm_cpu_get_parent’: drivers/clk/mvebu/armada-37xx-periph.c:419:6: warning: unused variable ‘num_parents’ [-Wunused-variable] int num_parents = clk_hw_get_num_parents(hw); ^~~~~~~~~~~ Remove the declaration of num_parents to dispose the warning. Fixes: `616bf80d38` ("clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-27 09:55:43 -07:00
Krzysztof Kozlowski	96455f734b	clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable Remove unused 'mout_user_aclk400_mcuisp_p4x12' variable to fix GCC warning: drivers/clk/samsung/clk-exynos4412-isp.c:40:27: warning: 'mout_user_aclk400_mcuisp_p4x12' defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-26 00:38:51 -07:00
Olof Johansson	692b12c756	Exynos5440 drivers removal The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting server platforms but it did not make it to the market really. There are no development boards with it and probably there are no real products neither. The development for Exynos5440 ended in 2013 and since then the platform is in maintenance mode. Removing Exynos5440 makes our life slightly easier: less maintenance, smaller code, reduced number of quirks, no need to preserve DTB backward-compatibility. The Device Tree sources and some of the drivers for Exynos5440 were already removed. This removes remaining drivers. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJbWKG7EBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9fNiA// U/dI+ihiIXHOxtrVRZXNGsmI5545pUqLI5uTE9utvD2j10Ef+T45wOzcJEtVN5ro +Mnqt32+LC0UfAo721Vfziu91t9HCYdeq6gFfgKS3mm5GPqqmsD7havl/UpT4jvL JZZLTPoInT2zJ0oZanzIRoM5I7KCOrUikkoVYEq9Z2/DupZ/S1GJLYXq1kY00eXS xrtNxTyhi6Hmg80h1u93jUfilWPuYvXAuTfK+nyHNXLDkVRAprEXEc0HCdKp0gKT hCEVd/k2+FsREQSCq5+dCTvYwa/FATqvwU/pKZmhSuN4GOM6b/0kFFvTt0sUswY3 ZFGnEhnXQ9JGHf3/1cXdRn3e/1/5vOyjchKzCdF5Pyo40HIvI1qSK4mhCSO355PO sIgI2OEEBCqVuu4HUeWDu13M7Q4haSHRCtqVyulT2LsNGRrm3Ko13lCz+knanMqH 4Cs7dLSz4ZqCSC4XYs8lnUvOFu2e/71vYs39QMi9yGro9Wn5T7H4qPNLVUuMER3K Hwrj5CpGKqBnMt3qFAfsxB0CnHU+yIRb55qp9nTZSUzZ9B++qnDhoDd1ikYtc/yh EHAnszKGPox2JbBzJRRQtpUq+qegnFaAkjssZf2eY89KKkjw/sHtssMA60dpV1tY txpP7KiTiM3Cq0/Jdqi5D2kiiiFtpABo1Jb3CLzxlTk= =3x4x -----END PGP SIGNATURE----- Merge tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Exynos5440 drivers removal The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting server platforms but it did not make it to the market really. There are no development boards with it and probably there are no real products neither. The development for Exynos5440 ended in 2013 and since then the platform is in maintenance mode. Removing Exynos5440 makes our life slightly easier: less maintenance, smaller code, reduced number of quirks, no need to preserve DTB backward-compatibility. The Device Tree sources and some of the drivers for Exynos5440 were already removed. This removes remaining drivers. * tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 Signed-off-by: Olof Johansson <olof@lixom.net>	2018-07-26 00:17:51 -07:00
Saravanan Sekar	d47317ca4a	clk: actions: Add S700 SoC clock support Add Actions Semi S700 SoC clock support Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 16:40:54 -07:00
Saravanan Sekar	d017c1f16a	clk: actions: Add missing REGMAP_MMIO dependency Add REGMAP_MMIO as dependency to avoid undefined reference to regmap symbols. Fixes: `d85d20053e` ("clk: actions: Add S900 SoC clock support") Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 16:40:52 -07:00
Kunihiko Hayashi	ff388ee365	clk: uniphier: add clock frequency support for SPI Add clock control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 16:26:18 -07:00
Masahiro Yamada	9d222574ef	clk: uniphier: add more USB3 PHY clocks Add USB3 PHY clocks where missing. Use fixed-factor clocks for those without gating. For clarification, prefix clock names with 'ss' or 'hs'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 15:45:32 -07:00
Masahiro Yamada	0316c018c5	clk: uniphier: add NAND 200MHz clock The Denali NAND controller IP needs three clocks: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run Currently, only the first one (50MHz) is provided. The rest of the two clock ports must be connected to the 200MHz clock line. Add this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 15:45:25 -07:00
Peter De-Schrijver	c76a69e477	clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks These clocks have low jitter paths to certain parents. To model these correctly, use the sdmmc mux divider clock type. Signed-off-by: Peter De-Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 14:26:22 -07:00
Peter De-Schrijver	633e79650b	clk: tegra: Add sdmmc mux divider clock Add a clock type to model the sdmmc switch divider clocks which have paths to source clocks bypassing the divider (Low Jitter paths). These are handled by selecting the lj path when the divider is 1 (ie the rate is the parent rate), otherwise the normal path with divider will be selected. Otherwise this clock behaves as a normal peripheral clock. Signed-off-by: Peter De-Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 13:45:09 -07:00
Peter De Schrijver	cb3ac5947a	clk: tegra: Refactor fractional divider calculation Move this to a separate file so it can be used to calculate the sdmmc clock dividers. Signed-off-by: Peter De-Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 13:43:34 -07:00
Aapo Vienamo	0cbb61a313	clk: tegra: Fix includes required by fence_udelay() Add the missing linux/delay.h include statement for udelay() used by fence_udelay() macro. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 13:43:13 -07:00
Nicholas Mc Guire	7f5eac5934	clk: imx6sll: fix missing of_node_put() of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: `4a5f720b65` ("clk: imx: add clock driver for imx6sll") Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 13:35:00 -07:00
Nicholas Mc Guire	11177e7a7a	clk: imx6ul: fix missing of_node_put() of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: `787b4271a6` ("clk: imx: add imx6ul clk tree support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 13:34:57 -07:00
Anson Huang	d7b7c00dad	clk: imx: add ocram_s clock for i.mx6sx i.MX6SX has a 16KB always-on ocram bank called ocram_s, and its clock gate in CCM CCGR1 CG14 needs to be enabled before access, add it to clock tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 09:44:58 -07:00
Gregory CLEMENT	616bf80d38	clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent The return value of the get_parent operation is a u8, whereas a -EINVAL was returned. This wrong value was return if the value was bigger that the number of parent but this case was already handled by the core. So we can just remove this chunk of code to fix the issue. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: `9818a7a4fd` ("clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 09:42:50 -07:00
Rajan Vaja	f6dab4233d	clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure Fixed factor clock has two initializations at of_clk_init() time and during platform driver probe. Before of_clk_init() call, node is marked as populated and so its probe never gets called. During of_clk_init() fixed factor clock registration may fail if any of its parent clock is not registered. In this case, it doesn't get chance to retry registration from probe. Clear OF_POPULATED flag if fixed factor clock registration fails so that clock registration is attempted again from probe. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 09:36:46 -07:00
Mikko Perttunen	365f7a89c8	clk: core: Potentially free connection id Patch "clk: core: Copy connection id" made it so that the connector id 'con_id' is kstrdup_const()ed to cater to drivers that pass non-constant connection ids. The patch added the corresponding kfree_const to __clk_free_clk(), but struct clk's can be freed also via __clk_put(). Add the kfree_const call to __clk_put() and add comments to both functions to remind that the logic in them should be kept in sync. Fixes: `253160a8ad` ("clk: core: Copy connection id") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 09:29:12 -07:00
Taniya Das	f9419783a6	clk: qcom: Update SPDX headers for common files SPDX headers updated for common/branch/pll/regmap files. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-25 09:23:33 -07:00
Krzysztof Kozlowski	fb174b27e8	clk: samsung: Remove support for Exynos5440 The Exynos5440 is not actively developed, there are no development boards available and probably there are no real products with it. Remove wide-tree support for Exynos5440. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>	2018-07-24 18:43:52 +02:00
Taniya Das	9c7e47025a	clk: qcom: clk-rpmh: Add QCOM RPMh clock driver Add the RPMh clock driver to control the RPMh managed clock resources on some of the Qualcomm Technologies, Inc. SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> [sboyd@kernel.org: Clean up whitespace, indentation, remove cmd_db_ready check] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-16 10:25:04 -07:00
Joel Stanley	565b9937f4	clk: aspeed: Support HPLL strapping on ast2400 The HPLL can be configured through a register (SCU24), however some platforms chose to configure it through the strapping settings and do not use the register. This was not noticed as the logic for bit 18 in SCU24 was confused: set means programmed, but the driver read it as set means strapped. This gives us the correct HPLL value on Palmetto systems, from which most of the peripheral clocks are generated. Fixes: `5eda5d79e4` ("clk: Add clock driver for ASPEED BMC SoCs") Cc: stable@vger.kernel.org # v4.15 Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-11 09:34:25 -07:00
Geert Uytterhoeven	76672e2e5b	ARM: 8776/1: clkdev: Remove duplicated negative index check from __of_clk_get() __of_clk_get() calls of_parse_phandle_with_args(), which rejects negative indices since commit `bd69f73f2c` ("of: Create function for counting number of phandles in a property"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>	2018-07-11 11:02:48 +01:00
Faiz Abbas	91c17a7006	clk: ti: dra7: Add clkctrl clock data for the mcan clocks Add clkctrl data for the m_can clocks and register it within the clkctrl driver Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>	2018-07-09 22:30:48 -07:00
Oleksij Rempel	30343897d8	clk: imx7d: add IMX7D_MU_ROOT_CLK This clock is needed for iMX mailbox driver Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-09 09:55:19 -07:00
Gregory CLEMENT	66c7bb7c41	clk: mvebu: armada-37xx-periph: switch to SPDX license identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-09 09:44:49 -07:00
Gregory CLEMENT	61c40f35f5	clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz respectively) to L0 frequency (1.2 Ghz) requires a significant amount of time to let VDD stabilize to the appropriate voltage. This amount of time is large enough that it cannot be covered by the hardware countdown register. Due to this, the CPU might start operating at L0 before the voltage is stabilized, leading to CPU stalls. To work around this problem, we prevent switching directly from the L2/L3 frequencies to the L0 frequency, and instead switch to the L1 frequency in-between. The sequence therefore becomes: 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) 2. Sleep 20ms for stabling VDD voltage 3. Then switch from L1(600MHZ) to L0(1200Mhz). It is based on the work done by Ken Ma <make@marvell.com> Cc: stable@vger.kernel.org Fixes: `2089dc33ea` ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-09 09:44:06 -07:00
Jerome Brunet	7df533a7e3	clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:49:31 +02:00
Jerome Brunet	80d396b511	clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition HHI_GEN_CLK_CTNL is defined twice, just remove the duplicate definition Fixes: `738f66d321` ("clk: gxbb: add AmLogic GXBB clk controller driver") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:49:22 +02:00
Yixun Lan	cddcb20b2b	clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:49:11 +02:00
Jerome Brunet	85ddc1a32c	clk: meson: remove unused clk-audio-divider driver clk-audio-divider is no longer used, we can remove it. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:48:59 +02:00
Jerome Brunet	9799d5ae00	clk: meson: stop rate propagation for audio clocks It is actually a lot easier to setup the PLL with carefully chosen rates than relying on CCF clock propagation for this audio use case. This way, we can make sure we will always be able to provide the common audio clock rates, while having the PLL in the optimal operating range. For this, we stop the rate propagation at the mux picking the PLL and let it round to the closest matching PLL. Doing so, we can use the generic divider for the i2s clock. clk-audio-divider is no longer required. It was a (poor) attempt to use CCF rate propagation while making sure the PLL rate would be high enough to work with audio use cases. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:48:59 +02:00
Jerome Brunet	1cd5018175	clk: meson: axg: add the audio clock controller driver The axg audio clock controller is the clock generation unit for the amlogic audio subsystem of A113 based SoCs. It may be clocked by 8 different plls provided by the primary clock controller and also by 10 slave bit clocks and 10 slave sample clocks which may be provided by external components, such as audio codecs, through the SoC pads. It contains several muxes, dividers and gates which are fed into the the different devices of the audio subsystem. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:48:26 +02:00
Jerome Brunet	3054a55c5d	clk: meson: add axg audio sclk divider driver Add a driver to control the clock divider found in the sample clock generator of the axg audio clock controller. The sclk divider accumulates specific features which make the generic divider unsuitable to control it: - zero based divider (div = val + 1), but zero value gates the clock, so minimum divider value is 2. - lrclk variant may adjust the duty cycle depending the divider value and the 'hi' value. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:48:25 +02:00
Jerome Brunet	2eb2a01b64	Merge remote-tracking branch 'clk/clk-core-duty-cycle' into next/drivers	2018-07-09 13:47:38 +02:00
Jerome Brunet	e8dd920776	clk: meson: add triple phase clock driver Add a driver to control the output of the sample clock generator found in the axg audio clock controller. The goal of this driver is to coherently control the phase provided to the different element using the sample clock generator. This simplify the usage of the sample clock generator a lot, without comprising the ability of the SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:47:22 +02:00
Jerome Brunet	47f21315a6	clk: meson: add clk-phase clock driver Add a driver based meson clk-regmap to control clock phase on amlogic SoCs Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:47:22 +02:00
Jerome Brunet	443f228578	clk: meson: clean-up meson clock configuration Clean the dependencies in meson clock Kconfig. CLK_AMLOGIC should actually select CLK_REGMAP_MESON which it uses. Also, each platform should select CLK_AMLOGIC, so everything is properly turned on when the platform Kconfig enable each configuration flag Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:46:21 +02:00
Jerome Brunet	60e267f3fd	clk: meson: remove obsolete register access The legacy method to access the hhi register space is not longer used. We can safely drop it now. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-07-09 13:46:21 +02:00
Dmitry Osipenko	405fcacbd8	clk: tegra: emc: Avoid out-of-bounds bug Apparently there was an attempt to avoid out-of-bounds accesses when there is only one memory timing available, but there is a typo in the code that neglects that attempt. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-08 17:10:19 -07:00
Dmitry Osipenko	da0d2239a5	clk: tegra: Mark Memory Controller clock as critical Memory Controller should be always-on. Currently the sibling EMC clock is marked as critical, let's mark MC clock too for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-08 17:08:31 -07:00
Thierry Reding	8097d4c75f	clk: tegra: Make vde a child of pll_c3 The current default is to leave the VDE clock's parent at the default, which is clk_m. However, that is not a configuration that will allow the VDE to function. Reparent it to pll_c3 instead to make sure the hardware can actually decode video content. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-08 17:06:48 -07:00
Thierry Reding	26f8590c4a	clk: tegra: Make vic03 a child of pll_c3 By default, the vic03 clock is a child of pll_m but that runs at 924 MHz which is too fast for VIC. Make vic03 a child of pll_c3 by default so it will run at a supported frequency. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-08 17:03:59 -07:00
Mikko Perttunen	f7b3182232	clk: tegra: bpmp: Don't crash when a clock fails to register When registering clocks, we just skip any that fail to register (leaving a NULL hole in the clock table). However, our of_xlate function still tries to dereference each entry while looking for the clock with the requested id, causing a crash if any clocks failed to register. Add a check to of_xlate to skip any NULL clocks. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-08 16:56:24 -07:00
Alberto Panizzo	a64ad00898	clk: rockchip: fix clk_i2sout parent selection bits on rk3399 Register, shift and mask were wrong according to datasheet. Fixes: `115510053e` ("clk: rockchip: add clock controller for the RK3399") Cc: stable@vger.kernel.org Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2018-07-08 00:19:19 +02:00
Taniya Das	da172d2b6b	clk: qcom: Move frequency table macro to common file Frequency table macro is used by multiple clock drivers, move frequency table macro to common header file. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 16:45:51 -07:00
Stephen Boyd	d0897bc85c	clk: imx51-imx53: Include sizes.h to silence compile errors This driver uses sizes.h, but relies on it being implicitly included somewhere else breaking random direct compilation of the file. Include sizes.h so we can build it those configurations too for better compile coverage. Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 14:08:04 -07:00
Fabio Estevam	ed235d5569	clk: imx51-imx53: Annotate critical clocks as CLK_IS_CRITICAL Instead of explicitly enabling critical clocks via clk_prepare_enable(), let's use the standard CLK_IS_CRITICAL flag instead, which makes the code a bit shorter. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 14:04:35 -07:00
Anson Huang	9d8108f9f3	clk: imx6sll: add GPIO LPCGs According to Reference Manual Rev.0, 06/2017, there are GPIO LPCGs defined in CCM CCGRs, add them into clock tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 13:58:20 -07:00
Lei YU	cd88259a72	clk: aspeed: Fix SDCLK name The SDCLK was named SDCLKCLK, and no one has used this yet. Fix it. Signed-off-by: Lei YU <mine260309@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 13:56:06 -07:00
Robert Jarzmik	fc20654389	clk: pxa: export 32kHz PLL This clock is especially used by the RTC driver, so export it so that devicetree users can use it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 13:52:57 -07:00
Joel Stanley	974c7c6d7b	clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical This is used by the host to talk to the BMC's PCIe slave device. The BMC is not involved, but the clock needs to be enabled so the host can use the device. Fixes: `15ed8ce5f8` ("clk: aspeed: Register gated clocks") Cc: stable@vger.kernel.org # 4.15 Acked-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 13:48:07 -07:00
Daniel Mack	33f5104624	clk: Add driver for MAX9485 This patch adds a driver for MAX9485, a programmable audio clock generator. The device requires a 27.000 MHz clock input. It can provide a gated buffered output of its input clock and two gated outputs of a PLL that can generate one out of 16 discrete frequencies. There is only one PLL however, so the two gated outputs will always have the same frequency but they can be switched individually. The driver for this device exposes 4 clocks in total: - MAX9485_MCLKOUT: A gated, buffered output of the input clock - MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete frequencies - MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT Some PLL output frequencies can be achieved with different register settings. The driver will select the one with lowest jitter in such cases. Signed-off-by: Daniel Mack <daniel@zonque.org> [sboyd@kernel.org: Use local variable for val in max9485_clkout_recalc_rate() and shorten line of max9485_of_clk_get()] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 13:44:06 -07:00
Paul Cercueil	2b555a4b9c	clk: ingenic: Add missing flag for UDC clock The UDC clock of the JZ4740 SoC can be gated, but the data structure representing it was missing the CGU_CLK_GATE flag to make it work. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:47:28 -07:00
Paul Cercueil	574f4e80d5	clk: ingenic: Fix incorrect data for the i2s clock The register field for configuring the divider for the i2s clock occupies the bits [8-0], which means 9 bits and not 8. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:47:27 -07:00
Vivek Gautam	53f3abe97b	clk/mmcc-msm8996: Make mmagic_bimc_gdsc ALWAYS_ON Patch (`7705bb7176` clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled") makes all mmgaic gdscs ALWAYS_ON. The mmagic_bimc_gdsc is also needed to be turned on to get display working on 8x96. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: `7705bb7176` ("clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled") Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:24:17 -07:00
Codrin Ciubotariu	96e4ea8c25	clk: at91: add I2S clock mux driver This driver is a simple muxing driver that controls the I2S's clock input by using syscon/regmap to change the parent. The available inputs can be peripheral clock and generated clock. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [sboyd@kernel.org: Fix SPDX tag comment style] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:12:20 -07:00
Dinh Nguyen	51b9a379a8	clk: socfpga: stratix10: fix the sdmmc_free_clk mux The first parent of the sdmmc_free_clk should be the main_sdmmc_clk. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:08:02 -07:00
Dinh Nguyen	2772ffd979	clk: socfpga: stratix10: fix the parents of mpu_free_clk Add a clock mux that is used as a parent for the mpu_free_clk. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 11:06:42 -07:00
Stephen Boyd	659e839c3c	- fix boot issue with gxbb and gxl platforms - fix racalculation error in the clk_audio_divider -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE9OFZrhjz9W1fG7cb5vwPHDfy2oUFAls7K6wACgkQ5vwPHDfy 2oVqgA/+I7+quYyvKga+1oeIJUbbdlnldB25Fr/o0jsyMXqwRDPUsMmfg1JsUaSR symbn1Ic3H7dB+Gy2JWCwOl/Avz6D27CUeypt3A0ckhD1KcO+1+SahtRhiSKVxXw ZlXDEvTq7Ipb6xjX01LLHeXIXF/Fsic9DvTgBPFVjVELsTrl2H13UXQFSbFuFWMw /nLWYRAvjJqce7UZh+QZcjwJaev8RAFCcbt8ER4C8ReRcGYp3nJnOENTo5otYu/n i3xP458SDj8QUaMrsBj3zq07h3gpHhbb+mMSuo6ru0+h/V8eviSP1cDPNxy1DawT TOs56UfO5aQuelQuAC/Xxvne7iyUBa2OdMp8Nj0zhBrW0A39qZxNdZv8als7Ej8n Z4VhWgjk/3UCnLDYJ8VINIX9fmcljnMV02WY32Djn0p7GJqnQyoY1GwWlje1Jidd +CqlcMyYKaoIDTuYFHwuHLFy3Tepbq8u5fIuqJG1x9rF8rHeeWNRIMEPB7mCyPzS H9fcJdOiiCTyGGHT3HIBx3VYPyZkFj0gbGR4nBMEce9JIBWdrfTqhRzxh7HC29Ek 8GuqY6UXscD1cyh3jcmGdW9Y6XqXSvkmbzAUAdGvWBZPBGsFWMgWbQ5bgIhZe9cY LFrYsZ+D/bvkI9HBylCV2BGoHAU8ApgwCx/BNy/BIONqYyFjldA= =QyDk -----END PGP SIGNATURE----- Merge tag 'meson-clk-fixes-4.18-1' of https://github.com/BayLibre/clk-meson into clk-fixes Pull Amlogic clk driver fixes from Jerome Brunet: These are two simple fixes, yet the first one is quite important as it solves boots hangs we've been having when FDIV2 gets disabled. This did not show up before because this particular clock is heavily used and only gets disabled for a very short period of time before modules (such as ethernet or emmc) probe. - fix boot issue with gxbb and gxl platforms - fix racalculation error in the clk_audio_divider * tag 'meson-clk-fixes-4.18-1' of https://github.com/BayLibre/clk-meson: clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL	2018-07-06 10:57:45 -07:00
Benjamin Herrenschmidt	edc6f7e9b1	clk: aspeed: Treat a gate in reset as disabled On some systems, we come out of the bootloader with some gates set with the clock "enabled" but the reset also asserted. Since `8a53fc511c` "clk: aspeed: Prevent reset if clock is enabled" we check that enabled bit in aspeed_clk_enabled(), and do nothing if already set. This breaks when the above scenario occurs, as the clock is enabled, but the reset still needs to be lifted. This patch fixes it by also checking the reset bit (if any) and treating a gate in "reset" as being disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: `8a53fc511c` "clk: aspeed: Prevent reset if clock is enabled" Cc: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 10:53:20 -07:00
Geert Uytterhoeven	40dd71c75e	clk: Really show symbolic clock flags in debugfs The last-minute fold-in of the ENTRY() macro did change behavior: instead of printing the symbolic name (e.g. "CLK_IS_BASIC"), it prints the expansion of it (e.g. "(1UL << (5))"). Use "#" instead of __stringify() to fix this. Fixes: `a6059ab981` ("clk: Show symbolic clock flags in debugfs") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 10:49:27 -07:00
Vinod Koul	5f75b78d3d	clk: qcom: gcc-msm8996: Disable halt check on UFS tx clock Commit `12d807cd34` ("clk: qcom: gcc-msm8996: Disable halt check on UFS clocks") marked BRANCH_HALT_SKIP for ufs rx clocks, but missed ufs tx clocks. The result of that is kernel warnings at reboot: [ 105.624283] gcc_ufs_tx_symbol_0_clk status stuck at 'on' [ 105.624311] WARNING: CPU: 1 PID: 1 at drivers/clk/qcom/clk-branch.c:100 clk_branch_toggle+0x190/0x1b0 [ 105.633235] Modules linked in: [ 105.645118] CPU: 1 PID: 1 Comm: systemd-shutdow Tainted: G W 4.18.0-rc2-00002-g2bfbe52a53a3 #11 [ 105.647988] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 105.657966] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 105.664127] pc : clk_branch_toggle+0x190/0x1b0 [ 105.668900] lr : clk_branch_toggle+0x190/0x1b0 [ 105.673324] sp : ffff00000805bb40 [ 105.677751] x29: ffff00000805bb40 x28: 0000000000000000 [ 105.681140] x27: ffff8000d947cc60 x26: 0000000000000001 [ 105.686520] x25: ffff000008f71900 x24: 0000000000000000 [ 105.691816] x23: ffff00000925e338 x22: ffff00000855f8e0 [ 105.697114] x21: 0000000000000000 x20: 0000000000000000 [ 105.702407] x19: ffff0000091c9000 x18: ffffffffffffffff [ 105.707702] x17: 0000ffffac148c58 x16: ffff000008b82928 [ 105.712998] x15: ffff0000091c96c8 x14: ffff0000893817c7 [ 105.718293] x13: ffff0000093817d5 x12: ffff0000091c9940 [ 105.723587] x11: ffff0000085e3e70 x10: ffff00000805b780 [ 105.728884] x9 : ffff00000805bb40 x8 : 7320737574617473 [ 105.734179] x7 : 206b6c635f305f6c x6 : 00000000000001e5 [ 105.739472] x5 : 0000000000000000 x4 : 0000000000000000 [ 105.744769] x3 : ffffffffffffffff x2 : ffff0000091e2658 [ 105.750063] x1 : a7c4712dd5e09c00 x0 : 0000000000000000 [ 105.755360] Call trace: [ 105.760652] clk_branch_toggle+0x190/0x1b0 [ 105.762824] clk_branch2_disable+0x18/0x20 [ 105.766994] clk_core_disable+0x58/0xa8 [ 105.771069] clk_core_disable_lock+0x20/0x38 [ 105.774803] clk_disable+0x1c/0x28 [ 105.779320] __ufshcd_setup_clocks+0x298/0x308 [ 105.782529] ufshcd_suspend+0x160/0x308 [ 105.786953] ufshcd_shutdown+0x38/0xa0 [ 105.790690] ufshcd_pltfrm_shutdown+0x10/0x18 [ 105.794512] platform_drv_shutdown+0x20/0x30 [ 105.798935] device_shutdown+0x110/0x1e8 [ 105.803278] kernel_restart_prepare+0x34/0x40 [ 105.807181] kernel_restart+0x14/0x78 [ 105.811434] sys_reboot+0x200/0x248 [ 105.815081] el0_svc_naked+0x30/0x34 [ 105.818378] ---[ end trace 8d2322276b27879c ]--- Mark gcc_ufs_tx_symbol_0_clk as BRANCH_HALT_SKIP as well. Fixes: `12d807cd34` ("clk: qcom: gcc-msm8996: Disable halt check on UFS clocks") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-06 10:48:42 -07:00
Bartosz Golaszewski	f917ff75ac	clk: davinci: psc-da830: add a lookup entry for aemif clock We want to use the ti-aemif platform driver for da830-evm. To make it work we need a lookup entry for the aemif clock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-07-06 12:34:54 -05:00
Bartosz Golaszewski	b910f74a03	clk: davinci: psc-dm646x: use two lookup entries for the aemif clock We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-07-06 12:34:54 -05:00
Bartosz Golaszewski	8d1a83faa6	clk: davinci: psc-dm644x: use two lookup entries for the aemif clock We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-07-06 12:34:54 -05:00
Bartosz Golaszewski	63521abc15	clk: davinci: psc-dm365: use two lookup entries for the aemif clock We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-07-06 12:34:54 -05:00
Bartosz Golaszewski	a82c02e5b8	clk: davinci: psc-da850: remove the 'davinci_nand.0" lookup Since commit `a8e3923ab5` ("mtd: rawnand: davinci: don't acquire and enable clock") we no longer acquire the aemif clock from the davinci nand driver - we only do it from the ti-aemif driver. Remove the nand entry from the psc lookup table. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-07-06 12:33:57 -05:00
Elaine Zhang	243229b111	clk: rockchip: add clock controller for px30 Add the clock tree definition for the new px30 SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2018-07-06 19:17:57 +02:00
Elaine Zhang	956060a527	clk: rockchip: add support for half divider The new Rockchip socs have optional half divider: The formula is shown as: freq_out = 2freq_in / (2div + 3) Is this the same for all of new SoCs. So we use "branch_half_divider" + "COMPOSITE_NOMUX_HALFDIV \ DIV_HALF \ COMPOSITE_HALFDIV \ CMPOSITE_NOGATE_HALFDIV" to hook that special divider clock-type into our clock-tree. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2018-07-06 19:17:57 +02:00
Amit Nischal	cfb8282e18	clk: qcom: Enable clocks which needs to be always on for SDM845 There are certain clocks which needs to be always enabled for system operation. Add support for the same by adding 'CLK_IS_CRITICAL' flag for such clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-07-03 10:10:36 -07:00
Philipp Puschmann	a7047564fe	clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL q/dl datasheets list the 5th selection value for ck01_sel as video_27M_clk_root. By replacing the dummy value we then can set IMX6QDL_CLK_VIDEO_27M as parent for IMX6QDL_CLK_CKO1_SEL. Signed-off-by: Philipp Puschmann <pp@emlix.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:45:34 -07:00
Anson Huang	4a2eaa8e25	clk: imx6ul: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:43:56 -07:00
Anson Huang	debef195bd	clk: imx6ul: add GPIO clock gates i.MX6UL has GPIO clock gates in CCM CCGR, add them into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:41:19 -07:00
Anson Huang	566f5b67fc	clk: imx6sx: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. IPG clock has no clock gate and its parent AHB clock is busy divider type, so no need to add CLK_IS_CRITICAL flag for IPG clock. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:29:35 -07:00
Anson Huang	8e12ce9954	clk: imx6sl: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. IPG clock has no clock gate and its parent AHB clock is busy divider type, so no need to add CLK_IS_CRITICAL flag for IPG clock. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:28:31 -07:00
Anson Huang	54614d1218	clk: imx6q: remove clks_init_on array Clock framework will enable those clocks registered with CLK_IS_CRITICAL flag, so no need to have clks_init_on array during clock initialization now. ARM clock is busy divider type which has the CLK_IS_CRITICAL flag set by default when registered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 11:28:16 -07:00
Mike Looijmans	e8f127caf6	clk-si514, clk-si544: Implement prepare/unprepare/is_prepared operations This adds prepare/unprepare/is_prepared functionality to the drivers for the SI544 and SI514 chips, allowing the clock output to be disabled when the clock is not in use. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-29 10:59:40 -07:00
Icenowy Zheng	0195156340	clk: sunxi-ng: add A64 compatible string As claiming Allwinner A64 SRAM C is a prerequisite for all sub-blocks of the A64 DE2, not only the CCU sub-block, a bus driver is then written for enabling the access to the whole DE2 part by claiming the SRAM. In this situation, the A64 compatible string will be just added with no other requirments, as they're processed by the parent bus driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-06-27 20:29:08 +02:00
Stephen Boyd	c34cc2f26a	clk: davinci: fixes for 4.18 Here are a couple of typo fixes for clk-davinci for 4.18. Technically, there are not any users of clk-davinci yet in 4.18, so this can wait until 4.19 if that is easier. Signed-off-by: David Lechner <david@lechnology.com> -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEinPYKmofUJkH83OIH4r4jIL3fAMFAlsxe+AVHGRhdmlkQGxl Y2hub2xvZ3kuY29tAAoJEB+K+IyC93wDHQcP/0UHP3GV4jwyqcZmWQv/448wWooQ LjwlBSe551Y0smgRS5Xv9D6PCyedMKwvjG+45A9CSNb8EiNWqN8gjEJDSoap7lrH +haxoffFFp2EXtCH/GIbZeZrv+Z5hGWLSn3ysO/xn0Ly2URpLi6L3VqPybB6f+jm 2cnxBHYjdBAonyrN00nK1xX8LVGHy26IZMeR/Ooxrp3lznQ9YgDpRSmJHVSlnQvc 6HGFt4OhQMu7VAt6xHsiZ2Jv3KZ8hKiM8SIkX3hXMoNqMhjzXcNEEshyGd9nlegj uqTgH7I8bhHuk68+hcJXj5UrLKwDsg+XKltHlqi1a2FskAw1LZhXNYUAyghdfHkm szY2JkLdHIhQoyhI+ammfKKoFot91LgOL93ZH+RFlJ7+wFxJA+gxE5pdLiot+vw4 EB7A0vQT/86mxsIv+uFK8B6qMnQeIRd+EK+zfYaEzvlZRGda3cdEggc+nZLASiUL Zz4P1IC1OgDVq5gcIulA1EA5kKUU4COUWablMlygg9ndnvNeUTd8UrO4y3wZZHvQ yCPn5NbE41WkpffiGavNZNw3/kFR47dY/DLVwcGQRuzcBstj/I3KUaiMfqgyV6oJ ei3Ph2aXBHtjj20ejmwuz/46RQSxdzVN6CTL+E5W5zbvMM19pOEGNHnQagWhboxT LC8qrS0W7kcnN9Nh =kXdQ -----END PGP SIGNATURE----- Merge tag 'clk-davinci-fixes-4.18' of https://github.com/dlech/linux into clk-fixes Pull davinci clk fixes for 4.18 from David Lechner: Here are a couple of typo fixes for clk-davinci for 4.18. * tag 'clk-davinci-fixes-4.18' of https://github.com/dlech/linux: clk: davinci: fix a typo (which leads to build failures) clk: davinci: cfgchip: testing the wrong variable	2018-06-27 11:01:29 -07:00
Jernej Skrabec	d18e85349f	clk: sunxi-ng: r40: Export video PLLs Video PLLs need to be referenced in R40 DT as possible HDMI PHY parent. Export them. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-06-27 19:06:56 +02:00
Jernej Skrabec	fb4aa0f643	clk: sunxi-ng: r40: Allow setting parent rate to display related clocks Display related peripherals need precise clocks to operate correctly. Allow DE2, TCONs and HDMI to set parent clock. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-06-27 19:06:41 +02:00
Jernej Skrabec	24a95f7578	clk: sunxi-ng: r40: Add minimal rate for video PLLs According to documentation and experience with other similar SoCs, video PLLs don't work stable if their output frequency is set below 192 MHz. Because of that, set minimal rate to both R40 video PLLs to 192 MHz. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-06-27 19:06:38 +02:00
Bartosz Golaszewski	176cbf5f62	clk: davinci: fix a typo (which leads to build failures) This should have been DM365, not DM356. Fixes: `4eff0bebf4` ("clk: davinci: Fix link errors when not all SoCs are enabled") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-06-25 18:09:57 -05:00
Dan Carpenter	0613de3737	clk: davinci: cfgchip: testing the wrong variable There is a copy and paste bug here. We should be testing "usb1" instead of "usb0". Fixes: `58e1e2d2cd` ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Lechner <david@lechnology.com>	2018-06-25 18:07:02 -05:00
Michel Pollet	4c3d88526e	clk: renesas: Renesas R9A06G032 clock driver This provides a clock driver for the Renesas R09A06G032. This uses a structure derived from both the R-Car Gen2 driver as well as the renesas-cpg-mssr driver. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2018-06-25 11:17:13 +02:00
Masahiro Yamada	12f8c553a5	clk: sunxi-ng: replace lib-y with obj-y We had commit `06e226c7fb` ("clk: sunxi-ng: Move all clock types to a library") and commit `799c434154` ("kbuild: thin archives make default for all archs") in the same development cycle, from different trees. With migration to the thin archive, the entire drivers/clk/sunxi-ng/lib.a is linked to the vmlinux. This does not break build, but we do not get any size saving. However, we do not need to go back to the individual Kconfig options. The default configuration pulls in all (or most) of the CCU parts anyway. Also, once we enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, we can simply list all files with obj-y, and the linker will drop all unused functions by itself. After the long discussion [1], people there agreed to fix this, but nobody sent a patch after all. I am doing it now. I lifted up CONFIG_SUNXI_CCU to drivers/clk/Makefile because everything in drivers/clk/sunxi-ng/ depends on SUNXI_CCU. [1] https://patchwork.kernel.org/patch/9796521/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-21 08:17:56 -07:00
Jerome Brunet	7813c14c94	clk: meson: audio-divider is one based The audio divider is one based. This offset was mistakenly dropped from recalc_rate() when migrating to clk_regmap. Fixes: `88a4e12836` ("clk: meson: migrate the audio divider clock to clk_regmap") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-06-21 10:10:50 +02:00
Jerome Brunet	9fba738a53	clk: add duty cycle support Add the possibility to apply and query the clock signal duty cycle ratio. This is useful when the duty cycle of the clock signal depends on some other parameters controlled by the clock framework. For example, the duty cycle of a divider may depends on the raw divider setting (ratio = N / div) , which is controlled by the CCF. In such case, going through the pwm framework to control the duty cycle ratio of this clock would be a burden. A clock provider is not required to implement the operation to set and get the duty cycle. If it does not implement .get_duty_cycle(), the ratio is assumed to be 50%. This change also adds a new flag, CLK_DUTY_CYCLE_PARENT. This flag should be used to indicate that a clock, such as gates and muxes, may inherit the duty cycle ratio of its parent clock. If a clock does not provide a get_duty_cycle() callback and has CLK_DUTY_CYCLE_PARENT, then the call will be directly forwarded to its parent clock, if any. For set_duty_cycle(), the clock should also have CLK_SET_RATE_PARENT for the call to be forwarded Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180619144141.8506-1-jbrunet@baylibre.com	2018-06-19 10:06:29 -07:00
Jerome Brunet	9461f7b33d	clk: fix CLK_SET_RATE_GATE with clock rate protection CLK_SET_RATE_GATE should prevent any operation which may result in a rate change or glitch while the clock is prepared/enabled. IOW, the following sequence is not allowed anymore with CLK_SET_RATE_GATE: * clk_get() * clk_prepare_enable() * clk_get_rate() * clk_set_rate() At the moment this is enforced on the leaf clock of the operation, not along the tree. This problematic because, if a PLL has the CLK_RATE_GATE, it won't be enforced if the clk_set_rate() is called on its child clocks. Using clock rate protection, we can now enforce CLK_SET_RATE_GATE along the clock tree Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180619134051.16726-3-jbrunet@baylibre.com	2018-06-19 10:03:38 -07:00
Jerome Brunet	04cdd5af51	clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks the mmci driver (drivers/mmc/host/mmci.c) does the following sequence: * clk_prepare_enable() * clk_set_rate() on SDCx_clk which is a children of SDCx_src. SDCx_src has CLK_SET_RATE_GATE so this sequence should not be allowed but this was not enforced. IOW, the flag is ignored. Dropping the flag won't change anything to the current behaviour of the platform. CLK_SET_RATE_GATE is being fixed and enforced now. If the flag was kept, the mmci driver would receive -EBUSY when calling clk_set_rate() Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180619134051.16726-2-jbrunet@baylibre.com	2018-06-19 10:02:28 -07:00
Neil Armstrong	c987ac6f1f	clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor seems to be dependent on the FCLK_DIV2 to be operationnal. The issue occurred since v4.17-rc1 by freezing the kernel boot when the 'schedutil' cpufreq governor was selected as default : [ 12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version domain-0 init dvfs: 4 [ 12.087757] hctosys: unable to open rtc device (rtc0) [ 12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' But when disabling the MMC driver, the boot finished but cpufreq failed to change the CPU frequency : [ 12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5 A bisect between v4.16 and v4.16-rc1 gave `05f814402d` ("clk: meson: add fdiv clock gates") to be the first bad commit. This commit added support for the missing clock gates before the fixed PLL fixed dividers (FCLK_DIVx) and the clock framework basically disabled all the unused fixed dividers, thus disabled a critical clock path for the SCPI Co-Processor. This patch simply sets the FCLK_DIV2 gate as critical to ensure nobody can disable it. Fixes: `05f814402d` ("clk: meson: add fdiv clock gates") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [few corrections in the commit description] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-06-19 17:20:11 +02:00
Gilad Ben-Yossef	46f3bb5fb9	clk: renesas: r8a7795: Add CCREE clock This patch adds the clock used by the CryptoCell 630p instance in the SoC. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2018-06-19 10:19:51 +02:00
Geert Uytterhoeven	3d5155eaad	clk: renesas: r8a7795: Add CR clock Add the CR core clock, which is used by the Secure Engine (SCEG). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Gilad Ben-Yossef <gilad@benyossef.com>	2018-06-19 10:19:51 +02:00
Mauro Carvalho Chehab	5fb94e9ca3	docs: Fix some broken references As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>	2018-06-15 18:10:01 -03:00
Kees Cook	a86854d0c5	treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) \| devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) \| devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) \| devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) \| devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) \| devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) \| devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) \| devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) \| devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) \| devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) \| devm_kzalloc(HANDLE, C1 * C2 * C3, ...) \| devm_kzalloc(HANDLE, C1 * C2, ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) \| - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>	2018-06-12 16:19:22 -07:00
Kees Cook	6396bb2215	treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) \| kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) \| kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) \| kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) \| kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) \| kzalloc( - sizeof(u8) * COUNT + COUNT , ...) \| kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) \| kzalloc( - sizeof(char) * COUNT + COUNT , ...) \| kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) \| kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) \| kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) \| kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) \| kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) \| kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) \| kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) \| kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) \| kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) \| kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) \| kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) \| kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) \| kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) \| kzalloc(sizeof(TYPE) * C2, ...) \| kzalloc(C1 * C2 * C3, ...) \| kzalloc(C1 * C2, ...) \| - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) \| - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) \| - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) \| - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) \| - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>	2018-06-12 16:19:22 -07:00
Linus Torvalds	6419945e33	This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlsWxugACgkQrQKIl8bk lSVs2A/9HOMsWeiYx1MESrXw6N2UknWeqeT/b1v8L/VOiptJg+OTExPbzmSylngv AXJAfIkCpguSMh9b310pA3DAzk5docmbQ4zL977yY+KXmOcDooCd34aG5a+tB3ie ugC8T2bQLrJdMp3hsqaKZsYzqe7LoW2NJgoliXDMA/QUBLpvHq+fcu2zOawingTA GNc3LGqP5Op7p09aPK30gtQNqLK5qGpHASa/AY7Y0PXlUeTZ8rmF06fcEAg5shkC CT57Zy2rSFB2RorEJarYXDPLRHMw/jxXtpMVXEy7zuz/3ajvvRiZDHv75+NaBru9 hDt1rzslzexEN4fYzj4AtGYRKyBrHbDaxG1qdIWPWVyoE0CEb+dZ1gH7/Ski5r+s z5D28NogC0T0sey6yWssyG3RLvkPJ5nxUhL++siHm1lbyo16LmhB1+nFvxrlzmBB 0V1xqEa7feYpD+JD66lJFb5ornHLwGtVYBpeiY+hrDR3ddWEe1IxaYGR2p9nHwSS Us/ZQdHIYBVEqoo3+BWnTn+HSQzmd/sqHqWnLlVWUHoomm5nXx18PeS87vFbcPv9 dMr+FFJ3Elubzcy5UZJPfNw+pb+teE7tYGQkQ3nbLRxT1YZOoIJZJDqNKxM1cgne 6c/VXJMEyBBn/w7Iru/3eWCZVQJGlmYS47DFDzduFvd3LMfmKIM= =KK/v -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...	2018-06-09 12:06:24 -07:00
Linus Torvalds	2857676045	- Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees) -----BEGIN PGP SIGNATURE----- Comment: Kees Cook <kees@outflux.net> iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g 8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J 2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4 bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61 jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa 3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04 KCDVLYPxwQQqK1Mqig== =/3L8 -----END PGP SIGNATURE----- Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: alloc(a b, ...) -> alloc_array(a, b, ...) and zalloc(a * b, ...) -> calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check__overflow functions compiler.h: enable builtin overflow checkers and add fallback code	2018-06-06 17:27:14 -07:00
Linus Torvalds	d75ae5bdf2	Printk changes for 4.18 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIbBAABAgAGBQJbFnd0AAoJEFKgDEdIgJTyuWgP+O/+kRbXR5WTphJ8e9+CqHp4 LF6AJXTuiA0fPJ5TcTNtZ84AVvmoNcTXnaM3Ou8HfR2qER8Gqu4WbdcfqhU2/KUq L4x4YlW+DZPOhy7chFx/yTgdSWc8vBwSG80DLSQhjnOJBY4SwBaVSSCYi/CSiAvr I18zt03mSXUe9RADrT3W0rbryIbyICvZjMbKkUlSm7ZTQv482FaU2Jezp86qDYLB FWc7QOLKzXRjFTg5IQ91mTtqnM2gnHwqOzGFR+jILn8BQwVe5dYp42sCSne34kBD pHz5GosIIYRH3Eik7pNzOhN4nsncLfPwwQQx/YH1KmKteNPTPJZO01pEwMaurc3w LaoTD7LNDyZCkzxJF/kKOiW4ys1cMf5jyoiV9Sou7PIVPcxuR1ToMXQvHSplZPG1 UyDwW41XVmluYdC2O4ybRQWMu3nmrQKCjjGkCmizK3xMWNs4u/5Y4kS3mi7Zwk3y X1wlm2BW7RPzVl7WWlNergR2UHNq2zgToOWzFfSqXtMukYbmei+mXYIIe6nKa2GH ji/d/Sr/RIAgUs46sBzRBLK9ZCqybPxSvnfNZx8WodLU1dLYT3yY1vGZbGPEMB2w puS7ctPT9dfnBxi/MOegXlTyKTOJkCB3o/bsWkIdSvRI45qbYE1aQN8IMmDQ20sv X8A3LnDQZvUfKEULrU0= =hB2y -----END PGP SIGNATURE----- Merge tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Help userspace log daemons to catch up with a flood of messages. They will get woken after each message even if the console is far behind and handled by another process. - Flush printk safe buffers safely even when panic() happens in the normal context. - Fix possible va_list reuse when race happened in printk_safe(). - Remove %pCr printf format to prevent sleeping in the atomic context. - Misc vsprintf code cleanup. * tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: drop in_nmi check from printk_safe_flush_on_panic() lib/vsprintf: Remove atomic-unsafe support for %pCr serial: sh-sci: Stop using printk format %pCr thermal: bcm2835: Stop using printk format %pCr clk: renesas: cpg-mssr: Stop using printk format %pCr printk: fix possible reuse of va_list variable printk: wake up klogd in vprintk_emit vsprintf: Tweak pF/pf comment lib/vsprintf: Mark expected switch fall-through lib/vsprintf: Replace space with '_' before crng is ready lib/vsprintf: Deduplicate pointer_string() lib/vsprintf: Move pointer_string() upper lib/vsprintf: Make flag_spec global lib/vsprintf: Make strspec global lib/vsprintf: Make dec_spec global lib/test_printf: Mark big constant with UL	2018-06-06 16:04:55 -07:00
Kees Cook	0ed2dd03b9	treewide: Use struct_size() for devm_kmalloc() and friends Replaces open-coded struct size calculations with struct_size() for devm_, f2fs_, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc\|devm_kzalloc\|sock_kmalloc\|f2fs_kmalloc\|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(VAR) + COUNT sizeof(VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc\|devm_kzalloc\|sock_kmalloc\|f2fs_kmalloc\|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(VAR) + COUNT sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc\|devm_kzalloc\|sock_kmalloc\|f2fs_kmalloc\|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>	2018-06-06 11:15:43 -07:00
Kees Cook	acafe7e302	treewide: Use struct_size() for kmalloc()-family One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void ) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof pkey_cache + tprops->pkey_tbl_len // sizeof pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc\|kzalloc\|kvmalloc\|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(VAR) + COUNT * sizeof(VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc\|kzalloc\|kvmalloc\|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(VAR) + COUNT sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc\|kzalloc\|kvmalloc\|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>	2018-06-06 11:15:43 -07:00
Geert Uytterhoeven	ef4b0be626	clk: renesas: cpg-mssr: Stop using printk format %pCr Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by open-coding the operation. This is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com>	2018-06-05 09:43:18 +02:00
Stephen Boyd	55913c2d33	Merge branch 'clk-imx6ul' into clk-next * clk-imx6ul: clk: imx6ul: fix periph clk2 clock mux selection	2018-06-04 12:41:57 -07:00
Stephen Boyd	b2ac878acd	Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', 'clk-davinci' and 'clk-meson' into clk-next * clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock	2018-06-04 12:37:41 -07:00
Stephen Boyd	a74271a507	Merge branch 'clk-qcom-8996-halt' into clk-next * clk-qcom-8996-halt: clk: qcom: gcc-msm8996: Disable halt check on UFS clocks clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk	2018-06-04 12:35:59 -07:00
Stephen Boyd	77122d6f74	Merge branch 'clk-qcom-sdm845' into clk-next * clk-qcom-sdm845: clk: qcom: Export clk_fabia_pll_configure() clk: qcom: Add video clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Video clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SDM845 clk: qcom: Add DT bindings for SDM845 gcc clock controller clk: qcom: Configure the RCGs to a safe source as needed clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks clk: qcom: Simplify gdsc status checking logic clk: qcom: gdsc: Add support to poll CFG register to check GDSC state clk: qcom: gdsc: Add support to poll for higher timeout value clk: qcom: gdsc: Add support to reset AON and block reset logic clk: qcom: Add support for controlling Fabia PLL clk: qcom: Clear hardware clock control bit of RCG Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the description and also the video Kconfig says things slightly differently from the GCC one so just make it the same.	2018-06-04 12:34:51 -07:00
Stephen Boyd	36851edd7e	Merge branches 'clk-match-string', 'clk-ingenic', 'clk-si544-round-fix' and 'clk-bcm-stingray' into clk-next * clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc	2018-06-04 12:32:33 -07:00
Stephen Boyd	ef1ae47094	Merge branches 'clk-imx7d', 'clk-hisi-stub', 'clk-mvebu', 'clk-imx6-epit' and 'clk-debugfs-simple' into clk-next * clk-imx7d: clk: imx7d: reset parent for mipi csi root clk: imx7d: fix mipi dphy div parent * clk-hisi-stub: clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB * clk-mvebu: clk: mvebu: use correct bit for 98DX3236 NAND * clk-imx6-epit: clk: imx6: add EPIT clock support * clk-debugfs-simple: clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions	2018-06-04 12:32:28 -07:00
Stephen Boyd	fff2e33717	Merge branches 'clk-imx6sx', 'clk-imx7d-enet' and 'clk-aspeed-24' into clk-next * clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock	2018-06-04 12:32:24 -07:00
Stephen Boyd	45ba387511	Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' and 'clk-qcom-mmagic' into clk-next * clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs	2018-06-04 12:27:44 -07:00
Stephen Boyd	7fa50aa559	Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', 'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next * clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR	2018-06-04 12:27:40 -07:00
Stephen Boyd	b7c82cec04	Merge branches 'clk-stm32mp1', 'clk-samsung', 'clk-uniphier-mpeg', 'clk-stratix10' and 'clk-aspeed' into clk-next * clk-stm32mp1: clk: stm32mp1: Fix a memory leak in 'clk_stm32_register_gate_ops()' clk: stm32mp1: Add CLK_IGNORE_UNUSED to ck_sys_dbg clock clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static * clk-samsung: clk: samsung: simplify getting .drvdata * clk-uniphier-mpeg: clk: uniphier: add LD11/LD20 stream demux system clock * clk-stratix10: clk: socfpga: stratix10: suppress unbinding platform's clock driver clk: socfpga: stratix10: use platform driver APIs * clk-aspeed: clk:aspeed: Fix reset bits for PCI/VGA and PECI clk: aspeed: Support second reset register	2018-06-04 12:27:34 -07:00
Stephen Boyd	872e47f75f	Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and 'clk-qcom-rcg-fix' into clk-next * clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency	2018-06-04 12:27:29 -07:00
Stephen Boyd	43705f5294	Merge branch 'clk-actions' into clk-next * clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings	2018-06-04 12:27:02 -07:00
Stephen Boyd	101cfc9f78	Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next * clk-warn: clk: Print the clock name and warning cause * clk-core: clk: Remove clk_init_cb typedef * clk-spear: clk: spear: fix WDT clock definition on SPEAr600 * clk-qcom-msm8998: clk: qcom: Add MSM8998 Global Clock Control (GCC) driver	2018-06-04 12:26:39 -07:00
Rafael J. Wysocki	2448d1399b	Merge branches 'acpi-soc' and 'acpi-tables' * acpi-soc: ACPI: APD: Add AMD misc clock handler support clk: x86: Add ST oscout platform clock ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2 * acpi-tables: ACPI / tables: improve comments regarding acpi_parse_entries_array()	2018-06-04 10:43:52 +02:00
Stephen Boyd	a3dcdc7e54	clk: qcom: Export clk_fabia_pll_configure() This is used by the video clk driver on sdm845 and that's a module. Export it to prevent module build failures. Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-02 00:20:41 -07:00
Pramod Kumar	5afa881c66	clk: bcm: Update and add Stingray clock entries Update and add Stingray clock definitions and tables so they match the binding document and the latest ASIC datasheet Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:26:37 -07:00
Mike Looijmans	4d3f36c5e9	clk-si544: Properly round requested frequency to nearest match The si544 driver had a rounding problem that using the result of clk_round_rate may set the clock to yet another rate, for example: clk_round_rate(195000000) = 194999999 clk_round_rate(194999999) = 194999998 Clients would expect that after clk_set_rate(clk, freq2=clk_round_rate(clk, freq)) the chip will be running at exactly freq2. The problem was in the calculation of the feedback divider, it was always rounded down instead of to the nearest possible VCO value. After this change, the following holds true for any supported frequency: actual_freq = clk_round_rate(clk, freq); clk_set_rate(clk, actual_freq); clk_round_rate(clk, actual_freq) == actual_freq && clk_get_rate(clk) == actual_freq Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Fixes: `953cc3e811` ("clk: Add driver for the si544 clock generator chip") Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:24:52 -07:00
Paul Cercueil	6ee3d385c2	clk: ingenic: jz4770: Add 150us delay after enabling VPU clock This is required, as we must not use the AHB1 bus before it is stable. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:39 -07:00
Paul Cercueil	a6523b6fb8	clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock This was broken before, because the AHB1 bus was enabled before the VPU clock was ungated, while it must be done afterwards. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:33 -07:00
Paul Cercueil	45ba63a29f	clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle When the main processor goes idle, by default its clock is stopped. However, this also stops the clock of the co-processor. Here, if the C1CLK clock is enabled, we disable this functionality. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:33 -07:00
Paul Cercueil	11b689a3e7	clk: ingenic: jz4770: Change OTG from custom to standard gated clock We now have the means to express the specificities of the OTG clock with the common CGU code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:32 -07:00
Paul Cercueil	261a831f04	clk: ingenic: Support specifying "wait for clock stable" delay Some clocks need a small delay after being ungated to run stable, as using them too soon might result in hardware lockups. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:31 -07:00
Paul Cercueil	7ef3844fc5	clk: ingenic: Add support for clocks whose gate bit is inverted Support the clocks which are gated when their gate bit is cleared instead of set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:21:09 -07:00
Yisheng Xie	d6347445c4	clk: use match_string() helper match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:17:08 -07:00
Yisheng Xie	99e7154352	clk: bcm2835: use match_string() helper match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: linux-clk@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 23:17:06 -07:00
Stephen Boyd	d75d50c016	clk: Return void from debug_init op We only have two users of the debug_init hook, and we recently stopped caring about the return value from that op. Finish that off by changing the clk_op to return void instead of int because it doesn't matter if debugfs fails or not. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 21:43:28 -07:00
Greg Kroah-Hartman	c1c2873df0	clk: remove clk_debugfs_add_file() No one was using this api call, so remove it. If it is ever needed in the future, a "raw" debugfs call can be used. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:25:53 -07:00
Greg Kroah-Hartman	df500f22d7	clk: tegra: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. The return value of these functions were never checked in the end anyway, so it is obvious this does not change any functionality :) Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:25:51 -07:00
Greg Kroah-Hartman	bcee76731c	clk: davinci: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Acked-by: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:22:56 -07:00
Greg Kroah-Hartman	c0526a111a	clk: bcm2835: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Phil Elwell <phil@raspberrypi.org> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:22:29 -07:00
Greg Kroah-Hartman	8a26bbbb93	clk: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. This cleans up the init code a lot, and there's no need to return an error value based on the debugfs calls, especially as it turns out no one was even looking at that return value. So it obviously wasn't that important :) Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:22:26 -07:00
Colin Didier	b1569380a6	clk: imx6: add EPIT clock support Add EPIT clock support to the i.MX6Q clocking infrastructure. Signed-off-by: Colin Didier <colin.didier@devialet.com> Signed-off-by: Clément Peron <clement.peron@devialet.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 19:19:30 -07:00
Chris Packham	00c5a926af	clk: mvebu: use correct bit for 98DX3236 NAND The correct fieldbit value for the NAND PLL reload trigger is 27. Fixes: commit `e120c17a70` ("clk: mvebu: support for 98DX3236 SoC") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:46:33 -07:00
Daniel Lezcano	7b873e4b5a	clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB The current defconfig is inconsistent as it selects the mailbox and the clock for the hi6220 and the hi3660 without having their Kconfigs making sure the dependencies are correct. It ends up when selecting different versions for the kernel (for example when git bisecting) those options disappear and they don't get back, leading to unexpected behaviors. In our case, the cpufreq driver does no longer work because the clock fails to initialize due to the clock stub and the mailbox missing. In order to have the dependencies correctly set when defaulting, let's do the same as commit `3a49afb84c` ("clk: enable hi655x common clk automatically") where we select automatically the driver when the parent driver is selected. With sensible defaults in place, we can leave other choices for EXPERT. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:45:43 -07:00
Rui Miguel Silva	b4f5e1ffcc	clk: imx7d: reset parent for mipi csi root To guarantee that we do not get Overflow in image FIFO the outer bandwidth has to be faster than inputer bandwidth. For that it must be possible to set a faster frequency clock. So set new parent to sys_pfd3 clock for the mipi csi block. Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:41:32 -07:00
Rui Miguel Silva	4dd5d5b520	clk: imx7d: fix mipi dphy div parent Fix the mipi dphy root divider to mipi_dphy_pre_div, this would remove a orphan clock and set the correct parent. before: cat clk_orphan_summary enable prepare protect clock count count count rate accuracy phase ---------------------------------------------------------------------------------------- mipi_dphy_post_div 1 1 0 0 0 0 mipi_dphy_root_clk 1 1 0 0 0 0 cat clk_dump \| grep mipi_dphy mipi_dphy_post_div 1 1 0 0 0 0 mipi_dphy_root_clk 1 1 0 0 0 0 after: cat clk_dump \| grep mipi_dphy mipi_dphy_src 1 1 0 24000000 0 0 mipi_dphy_cg 1 1 0 24000000 0 0 mipi_dphy_pre_div 1 1 0 24000000 0 0 mipi_dphy_post_div 1 1 0 24000000 0 0 mipi_dphy_root_clk 1 1 0 24000000 0 0 Fixes: `8f6d8094b2` ("ARM: imx: add imx7d clk tree support") Acked-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:41:24 -07:00
Bjorn Andersson	12d807cd34	clk: qcom: gcc-msm8996: Disable halt check on UFS clocks The halt check of the UFS symbol clocks always fails, as such probing UFS after clk_disable_unused always fails. This makes it impossible to boot a system with the UFS phy or UFS HCD drivers compiled as modules. Follow SDM845 and disable the halt check on these clocks. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:22:06 -07:00
Lei YU	67b6e5cfdb	clk: aspeed: Add 24MHz fixed clock Add a 24MHz fixed clock. This clock will be used for certain devices, e.g. pwm. Signed-off-by: Lei YU <mine260309@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:18:42 -07:00
Anson Huang	9c7150daff	clk: imx7d: correct enet clock CCGR registers Correct enet clock gates as below: CCGR6: IMX7D_ENET_AXI_ROOT_CLK (enet1 and enet2 bus clocks) CCGR112: IMX7D_ENET1_TIME_ROOT_CLK, IMX7D_ENET1_IPG_ROOT_CLK CCGR113: IMX7D_ENET2_TIME_ROOT_CLK, IMX7D_ENET2_IPG_ROOT_CLK Just rename unused IMX7D_ENETx_REF_ROOT_CLK for IMX7D_ENETx_IPG_ROOT_CLK instead of adding new clocks. Based on Andy Duan's patch from the NXP kernel tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:15:21 -07:00
Anson Huang	f93f2ed94a	clk: imx7d: correct enet phy ref clock gates IMX7D_ENET_PHY_REF_ROOT_DIV supplies clock for PHY directly, there is no clock gate after it, rename it to IMX7D_ENET_PHY_REF_ROOT_CLK to avoid device tree change. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:14:32 -07:00
Anson Huang	f82368dd69	clk: imx6sl: correct ocram_podf clock type IMX6SL_CLK_OCRAM_PODF is a busy divider, its name in CCM_CDHIPR register of Reference Manual CCM chapter is axi_podf_busy, correct its clock type. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:10:28 -07:00
Anson Huang	e912457806	clk: imx6sx: disable unnecessary clocks during clock initialization Disable those unnecessary clocks during kernel boot up to save power, those modules clock should be managed by modules driver in runtime. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 12:10:09 -07:00
Amit Nischal	c646b34766	clk: qcom: Add video clock controller driver for SDM845 Add support for the video clock controller found on SDM845 based devices. This would allow video drivers to probe and control their clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:49:08 -07:00
Manu Gautam	096abdc296	clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk The USB and PCIE pipe clocks are sourced from external clocks inside the QMP USB/PCIE PHYs. Enabling or disabling of PIPE RCG clocks is dependent on PHY initialization sequence hence update halt_check to BRANCH_HALT_SKIP for these clocks so that clock status bit is not polled when enabling or disabling the clocks. It allows to simplify PHY client driver code which is both user and source of the pipe_clk and avoid error logging related status check on clk_disable/enable. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:36:15 -07:00
Rajendra Nayak	7705bb7176	clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled There's no bus infrastructure today to handle all the mmagic bus clocks and GDSCs needed by all the multimedia blocks in msm8996, like mdss, video, camera and gpu. Mark all these clocks with a CLK_IS_CRITICAL and GDSCs with a ALWAYS_ON flag for now so they are left always enabled. This patch should be reverted at some point when we do have a bus driver to manage these clocks and GDSCs. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:14:55 -07:00
Rajendra Nayak	31543ebb8a	clk: qcom: Register the gdscs before the clocks We have atleast some instances of ALWAYS_ON gdscs, which need to be turned ON before some clocks within the gdsc domain marked with a CLK_IS_CRITICAL can be turned ON. To facilitate this sequence, register the GDCSs (and hence handle the ALWAYS_ON gdscs) before we register clocks (and handle the clocks marked as CLK_IS_CRITICAL) Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:14:52 -07:00
Rajendra Nayak	fb55bea1fe	clk: qcom: gdsc: Add support for ALWAYS_ON gdscs Some GDSCs might have software control to turn them off, but we might want to keep them enabled always, in some cases because of lack of support in kernel to handle a graceful turning off/on of such GDSCs. Most common instances would be the GDCSs which power up the noc/bus fabrics, which need bus drivers to handle them and atleast support for which is missing on all qcom SoCs. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:14:48 -07:00
Jisheng Zhang	3504395f61	clk: berlin: switch to SPDX license identifier Use the appropriate SPDX license identifier and drop the previous license text. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-06-01 11:00:30 -07:00
David Lechner	4eff0bebf4	clk: davinci: Fix link errors when not all SoCs are enabled This fixes linker errors due to undefined symbols when one or more of the TI DaVinci SoCs is not enabled in the kernel config. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-10-david@lechnology.com	2018-05-30 12:48:49 -07:00
David Lechner	043eaa70ad	clk: davinci: psc: allow for dev == NULL On some davinci SoCs, we need to register the PSC clocks during early boot because they are needed for clocksource/clockevent. These changes allow for dev == NULL because in this case, we won't have a platform device for the clocks. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-9-david@lechnology.com	2018-05-30 12:48:44 -07:00
David Lechner	17d8bacf19	clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE PLL0 on davinci/da850-type device needs to be registered early in boot because it is needed for clocksource/clockevent. Change the driver to use CLK_OF_DECLARE for this special case. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-8-david@lechnology.com	2018-05-30 12:48:39 -07:00
David Lechner	76c9dd9dbd	clk: davinci: pll: allow dev == NULL This modifies the TI Davinci PLL clock driver to allow for the case when dev == NULL. On some (most) SoCs that use this driver, the PLL clock needs to be registered during early boot because it is used for clocksource/clkevent and there will be no platform device available. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-7-david@lechnology.com	2018-05-30 12:48:35 -07:00
Sekhar Nori	9c39fc1fe8	clk: davinci: psc-dm365: fix few clocks Fix parent of EMAC and voice codec PSC clocks. Documentation is clear on EMAC clock parent, but its not fully clear on parent of voice codec clock. The implementation chosen is matches arch/arm/mach-davinci/dm365.c. Add a comment explaining this for posterity. There is only one power domain on DM365. Fix the power domain of voice codec and vpss dac modules. While at it, add a comment explaining how the parent of vpss dac clock was derived. Note that this patch does not touch the parent of vpss dac clock. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-6-david@lechnology.com	2018-05-30 12:48:31 -07:00
Sekhar Nori	7f02f18e7f	clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled PLL2 SYSCLK1 on DM646x is connected to DDR2 PHY and cannot be disabled. Mark it so to prevent unused clock disable infrastructure from disabling it. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-5-david@lechnology.com	2018-05-30 12:48:27 -07:00
David Lechner	715478bb63	clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups The clkdev lookups for the ASP0/1 devices on TI DM355 were declared, but not assigned to any LPSC. This assigns the clkdev lookups to the correct LPSCs. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-4-david@lechnology.com	2018-05-30 12:48:00 -07:00
David Lechner	6ce190bc42	clk: davinci: pll-dm355: fix SYSCLKn parent names This fixes the parent clock names of the SYSCLKn clocks for the DM355 SoC in the TI DaVinici PLL clock driver. It appears that this name just didn't get updated to the correct name like the other SoCs during the driver's development. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-3-david@lechnology.com	2018-05-30 12:47:55 -07:00
David Lechner	b4d73d224d	clk: davinci: pll-dm355: drop pll2_sysclk2 This removes pll2_sysclk2 from the TI DM355 clock driver. This SoC doesn't have such a clock. Also, SYSCLK_ALWAYS_ENABLED is transferred to pll2_sysclk1 since it drives the DDR and doesn't have another mechanism to keep it on. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-2-david@lechnology.com	2018-05-30 12:47:49 -07:00
Heiko Stuebner	1d646229f2	clk: rockchip: remove deprecated gate-clk code and dt-binding Initially we tried modeling clocks via the devicetree before switching to clocks declared in the clock drivers and only exporting specific ids to the devicetree. As the old code was in the kernel for 1-2 releases when the new mode of operation was added we kept it for backwards compatibility. That deprecation notice is in the binding since july 2014, so nearly 4 years now and I think it's time to drop the old cruft. Especially as at the time using the mainline kernel on Rockchip devices was not really possible, except for experiments on the really old socs of the rk3066 + rk3188 line, so there shouldn't be any devicetrees still around that rely on that code. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>	2018-05-23 13:19:06 +02:00
Yisheng Xie	a425702f68	clk: rockchip: use match_string() helper match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>	2018-05-22 13:32:09 +02:00
Jerome Brunet	de1ca2d07b	clk: meson: axg: let mpll clocks round closest Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-21 11:31:59 +02:00
Jerome Brunet	bae1106c37	clk: meson: mpll: add round closest support Allow the mpll driver to round the requested rate up if CLK_MESON_MPLL_ROUND_CLOSEST is set and it provides a rate closer to the requested rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-21 11:31:29 +02:00
Martin Blumenstingl	72e1f23020	clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL Until commit `05f814402d` ("clk: meson: add fdiv clock gates") we relied on the bootloader to enable the fclk_div clock gates. It turns out that our clock tree is incomplete at least on Meson8b (tested with an Odroid-C1, which uses an RGMII PHY) because after the mentioned commit Ethernet is not working anymore (no RX/TX activity can be seen). At the same time Ethernet was still working on Meson8m2 with a RMII PHY. Testing has shown that as soon as "fclk_div2" is disabled Ethernet stops working on Odroid-C1. Unfortunately it's currently not clear what the Ethernet controller IP block uses the fclk_div2 clock for. Mark the clock as CLK_IS_CRITICAL to keep it enabled (as it's already enabled by most bootloaders by default, which is why we didn't notice it before). Fixes: `05f814402d` ("clk: meson: add fdiv clock gates") Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-21 10:33:58 +02:00
Dmitry Osipenko	5d797111af	clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 CDEV1 and CDEV2 clocks are a bit special case, their parent clock is created by the pinctrl driver. It should be possible for clk user to request these clocks before pinctrl driver got probed and hence user will get an orphaned clock. That might be undesirable because user may expect parent clock to be enabled by the child, so let's return -EPROBE_DEFER till parent clock appears. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>	2018-05-18 12:35:28 +02:00
Dmitry Osipenko	efc351b1f4	clk: tegra20: Correct parents of CDEV1/2 clocks Parents of CDEV1/2 clocks are determined by muxing of the corresponding pins. Pinctrl driver now provides the CDEV1/2 clock muxes and hence CDEV1/2 clocks could have correct parents. Set CDEV1/2 parents to the corresponding muxes to fix the parents. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2018-05-18 12:35:07 +02:00
Dmitry Osipenko	08a52593fc	clk: tegra20: Add DEV1/DEV2 OSC dividers CDEV1/CDEV2 clocks could have corresponding oscillator clock divider as a parent. Add these dividers in order to be able to provide that parent option. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>	2018-05-18 12:34:49 +02:00
Jerome Brunet	22f65a389f	clk: meson: use SPDX license identifiers consistently Replace every license notices in drivers/clk/meson by SPDX license identifiers, as described in license-rules.rst Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-18 12:08:29 +02:00
Akshu Agrawal	421bf6a1f0	clk: x86: Add ST oscout platform clock Stoney SoC provides oscout clock. This clock can support 25Mhz and 48Mhz of frequency. The clock is available for general system use. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2018-05-17 12:44:06 +02:00
Icenowy Zheng	17de4c857b	clk: sunxi-ng: r40: export a regmap to access the GMAC register There's a GMAC configuration register, which exists on A64/A83T/H3/H5 in the syscon part, in the CCU of R40 SoC. Export a regmap of the CCU. Read access is not restricted to all registers, but only the GMAC register is allowed to be written. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>	2018-05-17 14:02:07 +08:00
Icenowy Zheng	c3bf29f675	clk: sunxi-ng: r40: rewrite init code to a platform driver As we need to register a regmap on the R40 CCU, there needs to be a device structure bound to the CCU device node. Rewrite the R40 CCU driver initial code to make it a proper platform driver, thus we will have a platform device bound to it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>	2018-05-17 14:01:49 +08:00
Marcin Ziemianowicz	a982e45dc1	clk: at91: PLL recalc_rate() now using cached MUL and DIV values When a USB device is connected to the USB host port on the SAM9N12 then you get "-62" error which seems to indicate USB replies from the device are timing out. Based on a logic sniffer, I saw the USB bus was running at half speed. The PLL code uses cached MUL and DIV values which get set in set_rate() and applied in prepare(), but the recalc_rate() function instead queries the hardware instead of using these cached values. Therefore, if recalc_rate() is called between a set_rate() and prepare(), the wrong frequency is calculated and later the USB clock divider for the SAM9N12 SOC will be configured for an incorrect clock. In my case, the PLL hardware was set to 96 Mhz before the OHCI driver loads, and therefore the usb clock divider was being set to /2 even though the OHCI driver set the PLL to 48 Mhz. As an alternative explanation, I noticed this was fixed in the past by `87e2ed338f` ("clk: at91: fix recalc_rate implementation of PLL driver") but the bug was later re-introduced by `1bdf02326b` ("clk: at91: make use of syscon/regmap internally"). Fixes: `1bdf02326b` ("clk: at91: make use of syscon/regmap internally) Cc: <stable@vger.kernel.org> Signed-off-by: Marcin Ziemianowicz <marcin@ziemianowicz.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 23:38:31 -07:00
Gabriel Fernandez	9a160601f3	clk: stm32: fix: stm32 clock drivers are not compiled by default Clock driver is mandatory if the machine is selected. Then don't use 'bool' and 'depends on' commands, but 'def_bool' with the machine(s). Fixes: `da32d3539f` ("clk: stm32: add configuration flags for each of the stm32 drivers") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:47:03 -07:00
Stefan Agner	2e5be528ab	clk: imx6ull: use OSC clock during AXI rate change On i.MX6 ULL using PLL3 seems to cause a freeze when setting the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear since commit `6f9575e556` ("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux"), probably because the clock is now forced to be on. Fixes: 6f9575e55632("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:41:01 -07:00
Sekhar Nori	a714dceb72	clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration USB0 48MHz PHY clock registration fails on DA830 because the da8xx-cfgchip clock driver cannot get a reference to USB0 LPSC clock. The USB0 LPSC needs to be enabled during PHY clock enable. Setup the clock lookup correctly to fix this. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:33:52 -07:00
Michael Trimarchi	f5a4670de9	clk: imx: Add new clo01 and clo2 controlled by CCOSR osc->cko2_sel->cko2_podf->clk_cko2->clk_cko Example of usage to provide clock to the sgtl5000 codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6UL_CLK_OSC>; #sound-dai-cells = <0>; clocks = <&clks IMX6UL_CLK_CKO>; assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>, <&clks IMX6UL_CLK_CKO>; assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>; clock-names = "mclk"; wlf,shared-lrclk; Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:26:33 -07:00
Sean Wang	a11ca68969	clk: mediatek: add g3dsys support for MT2701 and MT7623 Add clock driver support for g3dsys on MT2701 and MT7623, which is providing essential clock gate and reset controller to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:21:36 -07:00
Ryder Lee	bf61099a21	clk: mediatek: correct the clocks for MT2701 HDMI PHY module The hdmitx_dig_cts clock signal is not a child of clk26m, and the actual output of the PLL block is derived from the tvdpll via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Fixes: `e986211827` ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:17:49 -07:00
Jerome Brunet	329470f2d5	clk: bulk: silently error out on EPROBE_DEFER In clk_bulk_get(), if we fail to get the clock due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:16:13 -07:00
Jianguo Sun	80820a7bc8	clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC There are two USB3 host controllers on Hi3798CV200 SoC. This commit adds missing clocks for them. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:12:06 -07:00
Jae Hyun Yoo	e76e56823a	clk:aspeed: Fix reset bits for PCI/VGA and PECI This commit fixes incorrect setting of reset bits for PCI/VGA and PECI modules. 1. Reset bit for PCI/VGA is 8. 2. PECI reset bit is missing so added bit 10 as its reset bit. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Fixes: `15ed8ce5f8` ("clk: aspeed: Register gated clocks") Cc: stable <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 15:02:23 -07:00
Joel Stanley	dcb899c47d	clk: aspeed: Support second reset register The ast2500 has an additional reset register that contains resets not present in the ast2400. This enables support for this register, and adds the one reset line that is controlled by it. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 14:59:35 -07:00
Dinh Nguyen	a61315473a	clk: socfpga: stratix10: suppress unbinding platform's clock driver The Stratix10 clock driver is essential to system operation, so their removal should never happen. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 14:54:52 -07:00
Dinh Nguyen	1ace0dfd75	clk: socfpga: stratix10: use platform driver APIs Use platform driver APIs to map memory so that it will automatically free the memory in case of errors. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [sboyd@kernel.org: Return -ENOMEM error pointers, check for error pointer at call site] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 14:54:52 -07:00
Katsuhiro Suzuki	c5fc9cf244	clk: uniphier: add LD11/LD20 stream demux system clock Add clock for MPEG2 transport stream I/O and demux system (HSC) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 14:15:43 -07:00
Wolfram Sang	5c5e4fe37d	clk: samsung: simplify getting .drvdata We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 14:05:10 -07:00
Christophe JAILLET	823b68ea43	clk: stm32mp1: Fix a memory leak in 'clk_stm32_register_gate_ops()' We allocate some memory which is neither used, nor referenced by anything. So axe it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 13:37:03 -07:00
Gabriel Fernandez	77dc00205c	clk: stm32mp1: Add CLK_IGNORE_UNUSED to ck_sys_dbg clock Don't disable the dbg clock if was set by bootloader. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-15 11:22:11 -07:00
Yixun Lan	24a2e6796e	clk: meson: drop CLK_SET_RATE_PARENT flag The clk81 is not expected to be changed, so drop this flag. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:19:43 +02:00
Qiufang Dai	6693e2199e	clk: meson-axg: Add AO Clock and Reset controller driver Adds a Clock and Reset controller driver for the Always-On part of the Amlogic Meson-AXG SoC. Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:19:43 +02:00
Yixun Lan	88e2da8124	clk: meson: aoclk: refactor common code into dedicated file We try to refactor the common code into one dedicated file, while preparing to add new Meson-AXG aoclk driver, this would help us to better share the code by all aoclk drivers. Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:19:42 +02:00
Yixun Lan	bdfa6394c2	clk: meson: migrate to devm_of_clk_add_hw_provider API There is a protential memory leak, as of_clk_del_provider is never called if of_clk_add_hw_provider has been executed. Fix this by using devm variant API. Fixes: `f8c11f7991` ("clk: meson: Add GXBB AO Clock and Reset controller driver") Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:18:38 +02:00
Maxime Jourdan	a565242eb9	clk: meson: gxbb: add the video decoder clocks Add the SEL/DIV/GATE for VDEC_1 and VDEC_HEVC. Signed-off-by: Maxime Jourdan <maxi.jourdan@wanadoo.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:18:38 +02:00
Martin Blumenstingl	b8c1ddadc8	clk: meson: meson8b: add support for the NAND clocks This adds the NAND clocks (from the HHI_NAND_CLK_CNTL register) to the Meson8b clock driver. There are three NAND clocks: a gate which enables or disables the NAND clock, a mux and a divider (which divides the mux output). Unfortunately the public S805 datasheet does not document the mux parents. However, the vendor kernel has a few hints for us which allows us to make an educated guess about the clock parents. To do this we need to have a look at set_nand_core_clk() from the vendor's NAND driver (see [0]): - XTAL = (4<<9) \| (1<<8) \| 0 - 160MHz = (0<<9) \| (1<<8) \| 3) - 182MHz = (3<<9) \| (1<<8) \| 1) - 212MHz = (1<<9) \| (1<<8) \| 3) - 255MHz = (2<<9) \| (1<<8) \| 1) While there is a comment for the XTAL parent (which indicates that it should only be used for debugging) we have to do a bit of math for the other parents: target_freq * divider = rate of parent clock Bit 8 above is the enable bit, so we can ignore it here. Bits 11:9 are the mux index and bits 6:0 are the 0-based divider (so we need to add 1). This gives us: - mux 0 (160MHz * 4) = fclk_div4 (actual rate = 637.5MHz, off by 2.5MHz) - mux 1 (212MHz * 4) = fclk_div3 (actual rate = 850MHz, off by 2MHz) - mux 2 (255MHz * 2) = fclk_div5 (matches exactly 510MHz) - mux 3 (182MHz * 2) = fclk_div7 (actual rate = 346.3MHz, off by 0.3MHz) [0] https://github.com/khadas/linux/blob/9587681285cb/drivers/amlogic/amlnf/dev/amlnf_ctrl.c#L314 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-05-15 14:18:38 +02:00
Evan Green	c7d2a0eb6c	clk: qcom: Base rcg parent rate off plan frequency _freq_tbl_determine_rate uses the pre_div found in the clock plan multiplied by the requested rate from the caller to determine the best parent rate to set. If the requested rate is not exactly equal to the rate that was found in the clock plan, then using the requested rate in parent rate calculations is incorrect. For instance, if 150MHz was requested, but 200MHz was the match found, and that plan had a pre_div of 3, then the parent should be set to 600MHz, not 450MHz. Signed-off-by: Evan Green <evgreen@chromium.org> Fixes: `bcd61c0f53` ("clk: qcom: Add support for root clock generators (RCGs)") Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-10 11:45:32 -07:00
Yoshihiro Shimoda	3570a2af47	clk: renesas: cpg-mssr: Add support for R-Car E3 Initial support for R-Car E3 (r8a77990), including core and module clocks. Based on the Table 8.2g of "R-Car Series, 3rd Generation User's Manual: Hardware ((Rev. 0.80, Oct 31, 2017) with Manual Errata on Feb. 28, 2018". Inspried by patches by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2018-05-09 18:43:57 +02:00
Taniya Das	06391eddb6	clk: qcom: Add Global Clock controller (GCC) driver for SDM845 Add support for the global clock controller found on SDM845 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-08 11:22:55 -07:00
Amit Nischal	7d99ced8f4	clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks There could be few clocks where the clock status bit is not required to be polled as the clock on/off would be controlled by enabling/disabling external source. Add support for the same by introducing new flag named as 'BRANCH_HALT_SKIP'. Signed-off-by: Amit Nischal <anischal@codeaurora.org> [sboyd@kernel.org: Rename flag to BRANCH_HALT_SKIP] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-08 11:22:55 -07:00
Stephen Boyd	88051f55de	clk: qcom: Simplify gdsc status checking logic The code is complicated because we want to check if the GDSC is enabled or disabled based on different bits in different registers while the GDSC hardware is slightly different across chips. Furthermore, we poll the status of the enable or disable state by checking if the gdsc is enabled or not, and then comparing that to if the gdsc is being enabled or disabled. Let's push all that into one function, so we can ask if the status matches what we want, either on or off. Then the call site can just ask that question, and the logic to check that state can simply return yes or no, and not 1 or 0 or 0 or 1 depending on if we're enabling or disabling respectively. Tested-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-08 11:22:55 -07:00
Amit Nischal	7ef6f11887	clk: qcom: Configure the RCGs to a safe source as needed For some root clock generators, there could be child branches which are controlled by an entity other than application processor subsystem. For such RCGs, as per application processor subsystem clock driver, all of its downstream clocks are disabled and RCG is in disabled state but in reality downstream clocks can be left enabled before. So in this scenario, when RCG is disabled as per clock driver's point of view and when rate scaling request comes before downstream clock enable request, then RCG fails to update its configuration because in reality RCG is on and it expects its new source to already be in enable state but in reality new source is off. In order to avoid having the RCG to go into an invalid state, add support to update the CFG, M, N and D registers during set_rate() without configuration update and defer the actual RCG configuration update to be done during clk_enable() as at this point of time, both its new parent and safe source will be already enabled and RCG can safely switch to new parent. During clk_disable() request, configure it to safe source as both its parents, safe source and current parent will be enabled and RCG can safely execute a switch. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-08 11:22:55 -07:00
Anson Huang	5cc73ff7a3	clk: imx6sx: add missing lvds2 clock to the clock tree i.MX6SX has lvds2 (analog clock2), an I/O clock like lvds1. And this lvds2, along with lvds1, can be used to provide external clock source to the internal pll, such as pll4_audio and pll5_video. This patch mainly adds the lvds2 to the clock tree and fix its relationship with pll accordingly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-04 19:56:58 -07:00
Stefan Agner	a43e86833b	clk: imx6ul: fix periph clk2 clock mux selection According to the data sheet the 3rd choice is the bypass clock of pll2. This should not have any effect in practice as this selection is not used currently. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-04 19:55:15 -07:00
Icenowy Zheng	b7c7b05065	clk: sunxi-ng: add support for H6 PRCM CCU The H6 has clock/reset controls in PRCM part, like old SoCs such as H3 and A64. However, the PRCM CCU is rearranged; the register arragement is now similar to the main CCU of H6, and the PRCM now has two APB buses to control -- one is clocked from AHB clock derivde from AR100 clock, the other is clocked from the same mux with AR100 clock. Therefore a new driver is written for it. As there's no official document about the PRCM in H6, all the information are indirectly collected from BSP and parts of the document, and the information source is noted as comments in the driver's source code. If reliable information is provided furtherly, the driver needs to be rechecked. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>	2018-05-04 17:05:46 +02:00
Amit Nischal	e892e17d0c	clk: qcom: gdsc: Add support to poll CFG register to check GDSC state The default behavior of the GDSC enable/disable sequence is to poll the status bits of either the actual GDSCR or the corresponding HW_CTRL registers. On targets which have support for a CFG_GDSCR register, the status bits might not show the correct state of the GDSC, especially in the disable sequence, where the status bit will be cleared even before the core is completely power collapsed. On targets with this issue, poll the power on/off bits in the CFG_GDSCR register instead to correctly determine the GDSC state. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-01 16:34:07 -07:00
Wei Yongjun	1646337b86	clk: npcm7xx: fix return value check in npcm7xx_clk_init() In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: `fcfd143698` ("clk: npcm7xx: add clock controller") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-05-01 14:50:29 -07:00
Stephen Boyd	c964cfc612	First round of fixes for meson clocks targeted for v4.17 - fix typos in two meson8 clock names - remove unused clock ops declaration -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE9OFZrhjz9W1fG7cb5vwPHDfy2oUFAlrgTfIACgkQ5vwPHDfy 2oUvSxAApnug8+v18u+rIojj35YpEG8X24O2Pg7R2fLJIymNcC/ocb1IU8tqfeqy qYfsC+SyxZlyEQpx1YTO2cUMX4z2rISK1JpFsck3hbgLi+DkMZ7tqa10+i+IaCTB CLGsfc2BKNhqYEHdAP9CPnCTimS1c+/AM1dtuLaT59ZOP1EnUMSZ5g3w7pNc+qOb Kjp5+sBpkGIlikWIuyURsUQUWZ8eBhDLyW0jlExYRUp9eyo5dM0fpPU+UBMECaHx lvqAyVOlqRc24H5J38ovB4JjmeQiZ54JfZ6qRmz+z9oi6MQ/IS1f4WFUCFYSXgeP vE0JMgbWNbNNCSS9W+TGf0GOVbGjd5RIv+acQaybZ0hfIyJaC/WrYxdYkDA4Hv6D 2lh8JEeRA/wBaGfJu18KsJzXZqpG6r9PkVZisBOqUXf1cLKA8LJDiM8KUadV4w0z 1kUlLCc8yrxwP0xj3XzBorvgsXoRwIwfIV4Oz2FLz9c4Nkojpm+wdNLBI7Zkzt8d 28ulE9J9j96JhieS7Wl1YkRtPZYq4XPw2LjbuDp/Yp7NN9tPsbcAFg4YaV7gqrLW phMtqk2b9G3uk+x+9WdPuNBpOyC+I6Hs1OYSXpOyCeC4dqk+XR8jfAVo57Gk3+HG Gv0plGRhmFmoILpbaPbxR1othpsSc9gq+CutFJrSzuSWkkVLNhw= =ksxI -----END PGP SIGNATURE----- Merge tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson into clk-fixes Pull meson clk fixes from Jerome Brunet: - fix typos in two meson8 clock names - remove unused clock ops declaration * tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops	2018-05-01 14:44:16 -07:00
Martin Blumenstingl	5b33139b1a	clk: meson: meson8b: fix meson8b_cpu_clk parent clock name meson8b_cpu_clk has two parent clocks: - meson8b_xtal - meson8b_cpu_scale_out_sel The name of the "xtal" clock parent is specified correctly. However, there is a typo in the name of the second parent clock. The meson8b_cpu_scale_out_sel definition uses the name "cpu_scale_out_sel" (which matches the name from the datasheet). However, the mux parent definition uses the name "cpu_out_sel" which does not match any existing clock. Fixes: `251b6fd38b` ("clk: meson: rework meson8b cpu clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-04-25 10:23:19 +02:00
Martin Blumenstingl	b251e4c88f	clk: meson: meson8b: fix meson8b_fclk_div3_div clock name The names of all fclk divider gate clocks follow the naming schema "fclk_divN" and the name of all fclk fixed dividers follow the naming schema "fclk_divN_div". There's one exception to this rule: meson8b_fclk_div3_div's name is "fclk_div_div3". It's child clock meson8b_fclk_div3 however references it as "fclk_div3_div" (following the naming schema explained above). Fix the naming of the meson8b_fclk_div3_div clock to follow the naming schema. This also fixes serial console on my Meson8m2 board because "clk81" uses fclk_div3 as parent. However, since the hierarchy stops at meson8b_fclk_div3 there's no known parent clock and the rate of "clk81" and all of it's children (UART clock, SDIO MMC controller clock, ...) are all 0. Fixes: `05f814402d` ("clk: meson: add fdiv clock gates") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-04-25 10:21:35 +02:00
Yixun Lan	197143feed	clk: meson: drop meson_aoclk_gate_regmap_ops let's remove the unused meson_aoclk_gate_regmap_ops Fixes: `1f932d9971` ("clk: meson: remove superseded aoclk_gate_regmap") Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>	2018-04-25 10:19:26 +02:00
Geert Uytterhoeven	a597043304	clk: Remove clk_init_cb typedef Since commit `c08ee14cc6` ("clk: ti: change clock init to use generic of_clk_init"), there is only a single (private) user left of the (public) clk_init_cb typedef. Hence expand its single user in the core clock code, and remove the typedef. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1523365565-17124-1-git-send-email-geert+renesas@glider.be	2018-04-19 13:40:15 -07:00
Joonwoo Park	b5f5f525c5	clk: qcom: Add MSM8998 Global Clock Control (GCC) driver Add support for the global clock controller found on MSM8998 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Imran Khan <kimran@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Specify regs for alpha_plls, fix white spaces and add binding] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 22:51:27 -07:00
Amit Nischal	9fb38caee2	clk: qcom: gdsc: Add support to poll for higher timeout value For some gdscs, it might take longer time up to 500us for updating their status. Update the timeout value for all GDSC polling status. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 21:12:13 -07:00
Amit Nischal	44dbeebf14	clk: qcom: gdsc: Add support to reset AON and block reset logic For some of the gdsc power domains, there could be need to reset the AON logic or assert/deassert the block control reset before removing the clamp_io. Add support for the same by introducing new flags SW_RESET and AON_RESET. Both SW reset and AON reset requires to be asserted for at least 1us before being de-asserted. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 21:12:12 -07:00
Tali Perry	fcfd143698	clk: npcm7xx: add clock controller Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which generates and supplies clocks to all modules within the BMC. Signed-off-by: Tali Perry <tali.perry1@gmail.com> [sboyd@kernel.org: Drop clk_get()s, cleanup whitespace, drop unused includes, fix static checker warnings] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 20:38:38 -07:00
Jerome Brunet	6cc1eb5078	clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap Using __clk_mux_determine_rate effectively ignores CLK_MUX_ROUND_CLOSEST if set the related clk_regmap mux instance. Use clk_mux_determine_rate_flags() to make sure the flag is honored. Fixes: `ea11dda9e0` ("clk: meson: add regmap clocks") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 09:25:09 -07:00
Jerome Brunet	4ad69b80e8	clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux CLK_MUX_ROUND_CLOSEST is part of the clk_mux documentation but clk_mux directly calls __clk_mux_determine_rate(), which overrides the flag. As result, if clk_mux is instantiated with CLK_MUX_ROUND_CLOSEST, the flag will be ignored and the clock rounded down. To solve this, this patch expose clk_mux_determine_rate_flags() in the clk-provider API and uses it in the determine_rate() callback of clk_mux. Fixes: `15a02c1f6d` ("clk: Add __clk_mux_determine_rate_closest") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 09:25:07 -07:00
Arnd Bergmann	a21b85944c	clk: cs2000: mark resume function as __maybe_unused When power management is disabled, we get a harmless warning: drivers/clk/clk-cs2000-cp.c:544:12: error: 'cs2000_resume' defined but not used [-Werror=unused-function] Marking the function as __maybe_unused lets the compiler silently drop it instead. Fixes: `eade4ccdb0` ("clk: cs2000: set pm_ops in hibernate-compatible way") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2018-04-16 09:07:22 -07:00
Stephen Boyd	1486776535	Merge branch 'clk-stm32mp1' into clk-fixes * clk-stm32mp1: clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static	2018-04-16 08:58:39 -07:00
Geert Uytterhoeven	a34f778cb8	clk: renesas: rcar-gen2: Centralize quirks handling Introduce centralized quirks handling like on R-Car Gen3, and convert the RZ/G1C SD clock table handling over to it. This makes it easier to add more quirks later, if/when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Biju Das <biju.das@bp.renesas.com>	2018-04-16 13:42:18 +02:00
Geert Uytterhoeven	246e232437	clk: renesas: r8a77980: Correct parent clock of PCIEC0 According to the R-Car Gen3 Hardware Manual Errata for Rev 0.80 of December 22, 2017, the parent clock of the PCIe module clock on R-Car V3H is S2D2. Fixes: `ce15783c51` ("clk: renesas: cpg-mssr: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>	2018-04-16 13:40:28 +02:00
Geert Uytterhoeven	279ebbcae5	clk: renesas: r8a7794: Fix LB clock divider The CLK_TYPE_GEN2_LB clock type is meant for SoCs like R-Car H2, where the LB clock divider depends on the value of the MD18 pin. On R-Car E2, the LB clock divider is fixed to 24. Hence model the clock as a fixed factor clock instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>	2018-04-16 13:39:51 +02:00
Geert Uytterhoeven	0873305e68	clk: renesas: r8a7792: Fix LB clock divider The CLK_TYPE_GEN2_LB clock type is meant for SoCs like R-Car H2, where the LB clock divider depends on the value of the MD18 pin. On R-Car V2H, the LB clock divider is fixed to 24. Hence model the clock as a fixed factor clock instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>	2018-04-16 13:39:49 +02:00
Geert Uytterhoeven	6041ce57f2	clk: renesas: r8a7791/r8a7793: Fix LB clock divider The CLK_TYPE_GEN2_LB clock type is meant for SoCs like R-Car H2, where the LB clock divider depends on the value of the MD18 pin. On R-Car M2-W and M2-N, the LB clock divider is fixed to 24. Hence model the clock as a fixed factor clock instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>	2018-04-16 13:39:47 +02:00
Geert Uytterhoeven	83fab8ea62	clk: renesas: r8a7745: Fix LB clock divider The CLK_TYPE_GEN2_LB clock type is meant for SoCs like R-Car H2, where the LB clock divider depends on the value of the MD18 pin. On RZ/G1E, the LB clock divider is fixed to 24. Hence model the clock as a fixed factor clock instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>	2018-04-16 13:39:45 +02:00
Geert Uytterhoeven	2c2557e390	clk: renesas: r8a7743: Fix LB clock divider The CLK_TYPE_GEN2_LB clock type is meant for SoCs like R-Car H2, where the LB clock divider depends on the value of the MD18 pin. On RZ/G1M, the LB clock divider is fixed to 24. Hence model the clock as a fixed factor clock instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>	2018-04-16 13:39:43 +02:00
Biju Das	5bf2fbbef5	clk: renesas: cpg-mssr: Add r8a77470 support Add RZ/G1C (R8A77470) Clock Pulse Generator / Module Standby and Software Reset support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2018-04-16 13:39:40 +02:00
Takeshi Kihara	cdc749e229	clk: renesas: r8a77965: Add MSIOF controller clocks This patch adds MSIOF{0,1,2,3} clocks to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>	2018-04-16 13:39:36 +02:00

... 3 4 5 6 7 ...

5274 Commits