When application runs in busy poll mode and does not receive a single
packet but only sends them, it is currently impossible to get into
napi_busy_loop() as napi_id is only marked on Rx side in xsk_rcv_check().
In there, napi_id is being taken from xdp_rxq_info carried by xdp_buff.
From Tx perspective, we do not have access to it. What we have handy is
the xsk pool.
Xsk pool works on a pool of internal xdp_buff wrappers called xdp_buff_xsk.
AF_XDP ZC enabled drivers call xp_set_rxq_info() so each of xdp_buff_xsk
has a valid pointer to xdp_rxq_info of underlying queue. Therefore, on Tx
side, napi_id can be pulled from xs->pool->heads[0].xdp.rxq->napi_id. Hide
this pointer chase under helper function, xsk_pool_get_napi_id().
Do this only for sockets working in ZC mode as otherwise rxq pointers would
not be initialized.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220707130842.49408-1-maciej.fijalkowski@intel.com
When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1
to pages' DMA addresses that go in ascending order and at 4K stride.
The problem is that the bit does not get cleared before doing unmap.
As a result, a lot of warnings from iommu_dma_unmap_page() are seen
in dmesg, which indicates that lookups by iommu_iova_to_phys() fail.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two points of potential failure in the generic transmit function are:
1. completion queue (cq) reservation failure.
2. skb allocation failure
Originally the cq reservation was performed first, followed by the skb
allocation. Commit 675716400d ("xdp: fix possible cq entry leak")
reversed the order because at the time there was no mechanism available
to undo the cq reservation which could have led to possible cq entry leaks
in the event of skb allocation failure. However if the skb allocation is
performed first and the cq reservation then fails, the xsk skb destructor
is called which blindly adds the skb address to the already full cq leading
to undefined behavior.
This commit restores the original order (cq reservation followed by skb
allocation) and uses the xskq_prod_cancel helper to undo the cq reserve
in event of skb allocation failure.
Fixes: 675716400d ("xdp: fix possible cq entry leak")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220614070746.8871-1-ciara.loftus@intel.com
xdpxceiver run on a AF_XDP ZC enabled driver revealed a problem with XSK
Tx batching API. There is a test that checks how invalid Tx descriptors
are handled by AF_XDP. Each valid descriptor is followed by invalid one
on Tx side whereas the Rx side expects only to receive a set of valid
descriptors.
In current xsk_tx_peek_release_desc_batch() function, the amount of
available descriptors is hidden inside xskq_cons_peek_desc_batch(). This
can be problematic in cases where invalid descriptors are present due to
the fact that xskq_cons_peek_desc_batch() returns only a count of valid
descriptors. This means that it is impossible to properly update XSK
ring state when calling xskq_cons_release_n().
To address this issue, pull out the contents of
xskq_cons_peek_desc_batch() so that callers (currently only
xsk_tx_peek_release_desc_batch()) will always be able to update the
state of ring properly, as total count of entries is now available and
use this value as an argument in xskq_cons_release_n(). By
doing so, xskq_cons_peek_desc_batch() can be dropped altogether.
Fixes: 9349eb3a9d ("xsk: Introduce batched Tx descriptor interfaces")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220607142200.576735-1-maciej.fijalkowski@intel.com
Use ida_alloc() / ida_free() instead of the deprecated ida_simple_get() /
ida_simple_remove().
Signed-off-by: Ke Liu <liuke94@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220527064609.2358482-1-liuke94@huawei.com
For now, the field 'map_btf_id' in 'struct bpf_map_ops' for all map
types are computed during vmlinux-btf init:
btf_parse_vmlinux() -> btf_vmlinux_map_ids_init()
It will lookup the btf_type according to the 'map_btf_name' field in
'struct bpf_map_ops'. This process can be done during build time,
thanks to Jiri's resolve_btfids.
selftest of map_ptr has passed:
$96 map_ptr:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify the mentioned helper function by removing ternary operator. The
expression that is there outputs the boolean value by itself.
This helper might be used in the hot path so this simplification can
also be considered as micro optimization.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-15-maciej.fijalkowski@intel.com
Inspired by patch that made xdp_do_redirect() return values for XSKMAP
more meaningful, return -ENXIO instead of -EINVAL for socket being
unbound in xsk_rcv_check() as this is the usual value that is returned
for such event. In turn, it is now possible to easily distinguish what
went wrong, which is a bit harder when for both cases checked, -EINVAL
was returned.
Return codes can be counted in a nice way via bpftrace oneliner that
Jesper has shown:
bpftrace -e 'tracepoint:xdp:xdp_redirect* {@err[-args->err] = count();}'
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220413153015.453864-3-maciej.fijalkowski@intel.com
The error codes returned by xdp_do_redirect() when redirecting a frame
to an AF_XDP socket has not been very useful. A driver could not
distinguish between different errors. Prior this change the following
codes where used:
Socket not bound or incorrect queue/netdev: EINVAL
XDP frame/AF_XDP buffer size mismatch: ENOSPC
Could not allocate buffer (copy mode): ENOSPC
AF_XDP Rx buffer full: ENOSPC
After this change:
Socket not bound or incorrect queue/netdev: EINVAL
XDP frame/AF_XDP buffer size mismatch: ENOSPC
Could not allocate buffer (copy mode): ENOMEM
AF_XDP Rx buffer full: ENOBUFS
An AF_XDP zero-copy driver can now potentially determine if the
failure was due to a full Rx buffer, and if so stop processing more
frames, yielding to the userland AF_XDP application.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220413153015.453864-2-maciej.fijalkowski@intel.com
While checking AF_XDP copy mode combined with busy poll, strange
results were observed. rxdrop and txonly scenarios worked fine, but
l2fwd broke immediately.
After a deeper look, it turned out that for l2fwd, Tx side was exiting
early due to xsk_no_wakeup() returning true and in the end
xsk_generic_xmit() was never called. Note that AF_XDP Tx in copy mode
is syscall steered, so the current behavior is broken.
Txonly scenario only worked due to the fact that
sk_mark_napi_id_once_xdp() was never called - since Rx side is not in
the picture for this case and mentioned function is called in
xsk_rcv_check(), sk::sk_napi_id was never set, which in turn meant that
xsk_no_wakeup() was returning false (see the sk->sk_napi_id >=
MIN_NAPI_ID check in there).
To fix this, prefer busy poll in xsk_sendmsg() only when zero copy is
enabled on a given AF_XDP socket. By doing so, busy poll in copy mode
would not exit early on Tx side and eventually xsk_generic_xmit() will
be called.
Fixes: a0731952d9 ("xsk: Add busy-poll support for {recv,send}msg()")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220406155804.434493-1-maciej.fijalkowski@intel.com
For the case when xp_alloc_batch() is used but the batched allocation
cannot be used, there is a slow path that uses the non-batched
xp_alloc(). When it fails to allocate an entry, it returns NULL. The
current code wrote this NULL into the entry of the provided results
array (pointer to the driver SW ring usually) and returned. This might
not be what the driver expects and to make things simpler, just write
successfully allocated xdp_buffs into the SW ring,. The driver might
have information in there that is still important after an allocation
failure.
Note that at this point in time, there are no drivers using
xp_alloc_batch() that could trigger this slow path. But one might get
added.
Fixes: 47e4075df3 ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-2-maciej.fijalkowski@intel.com
Fix a race in the xsk socket teardown code that can lead to a NULL pointer
dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by
setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any
NAPI processing to terminate using synchronize_net(). After that, the release
code starts to tear down the socket state and free allocated memory.
BUG: kernel NULL pointer dereference, address: 00000000000000c0
PGD 8000000932469067 P4D 8000000932469067 PUD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015
RIP: 0010:__xsk_sendmsg+0x2c/0x690
[...]
RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258
RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800
RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800
R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000
FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0
Call Trace:
<TASK>
? aa_sk_perm+0x43/0x1b0
xsk_sendmsg+0xf0/0x110
sock_sendmsg+0x65/0x70
__sys_sendto+0x113/0x190
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x23/0x50
? exit_to_user_mode_prepare+0xa5/0x1d0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
There are two problems with the current code. First, setting xs->dev to NULL
before waiting for all users to stop using the socket is not correct. The
entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg()
are all guarded by a test that xs->state is in the state XSK_BOUND and if not,
it returns right away. But one process might have passed this test but still
have not gotten to the point in which it uses xs->dev in the code. In this
interim, a second process executing xsk_unbind_dev() might have set xs->dev to
NULL which will lead to a crash for the first process. The solution here is
just to get rid of this NULL assignment since it is not used anymore. Before
commit 42fddcc7c6 ("xsk: use state member for socket synchronization"),
xs->dev was the gatekeeper to admit processes into the data plane functions,
but it was replaced with the state variable xs->state in the aforementioned
commit.
The second problem is that synchronize_net() does not wait for any process in
xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the
state they rely on might be cleaned up prematurely. This can happen when the
notifier gets called (at driver unload for example) as it uses xsk_unbind_dev().
Solve this by extending the RCU critical region from just the ndo_xsk_wakeup
to the whole functions mentioned above, so that both the test of xs->state ==
XSK_BOUND and the last use of any member of xs is covered by the RCU critical
section. This will guarantee that when synchronize_net() completes, there will
be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and
state can be cleaned up safely. Note that we need to drop the RCU lock for the
skb xmit path as it uses functions that might sleep. Due to this, we have to
retest the xs->state after we grab the mutex that protects the skb xmit code
from, among a number of things, an xsk_unbind_dev() being executed from the
notifier at the same time.
Fixes: 42fddcc7c6 ("xsk: use state member for socket synchronization")
Reported-by: Elza Mathew <elza.mathew@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20220228094552.10134-1-magnus.karlsson@gmail.com
Move desc_array from the driver to the pool. The reason behind this is
that we can then reuse this array as a temporary storage for descriptors
in all zero-copy drivers that use the batched interface. This will make
it easier to add batching to more drivers.
i40e is the only driver that has a batched Tx zero-copy
implementation, so no need to touch any other driver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20220125160446.78976-6-maciej.fijalkowski@intel.com
Remove two dead stubs, sk_msg_clear_meta() was never
used, use of xskq_cons_is_full() got replaced by
xsk_tx_writeable() in v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220126185412.2776254-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-31
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc0 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes: 199d983bc0 ("xsk: Fix crash on double free in buffer pool")
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
This reverts commit bd0687c18e.
This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.
Fixes: bd0687c18e ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.com
Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.
Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.
Fixes: 77cd0d7b3f ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
This is distracting really, let's make this simpler,
because many callers had to take care of this
by themselves, even if on x86 this adds more
code than really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a crash in the buffer pool allocator when a buffer is double
freed. It is possible to trigger this behavior not only from a faulty
driver, but also from user space like this: Create a zero-copy AF_XDP
socket. Load an XDP program that will issue XDP_DROP for all
packets. Put the same umem buffer into the fill ring multiple times,
then bind the socket and send some traffic. This will crash the kernel
as the XDP_DROP action triggers one call to xsk_buff_free()/xp_free()
for every packet dropped. Each call will add the corresponding buffer
entry to the free_list and increase the free_list_cnt. Some entries
will have been added multiple times due to the same buffer being
freed. The buffer allocation code will then traverse this broken list
and since the same buffer is in the list multiple times, it will try
to delete the same buffer twice from the list leading to a crash.
The fix for this is just to test that the buffer has not been added
before in xp_free(). If it has been, just return from the function and
do not put it in the free_list a second time.
Note that this bug was not present in the code before the commit
referenced in the Fixes tag. That code used one list entry per
allocated buffer, so multiple frees did not have any side effects. But
the commit below optimized the usage of the pool and only uses a
single entry per buffer in the umem, meaning that multiple
allocations/frees of the same buffer will also only use one entry,
thus leading to the problem.
Fixes: 47e4075df3 ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20211111075707.21922-1-magnus.karlsson@gmail.com
Fix a build error with clang in __xp_alloc():
[...]
net/xdp/xsk_buff_pool.c:465:15: error: variable 'xskb' is uninitialized
when used here [-Werror,-Wuninitialized]
xp_release(xskb);
^~~~
This is correctly detected by clang, but not gcc. In fact, the xp_release()
statement should not be there at all in the refactored code, just remove it.
Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210929061403.8587-1-magnus.karlsson@gmail.com
Optimize for the aligned case by precomputing the parameter values of
the xdp_buff_xsk and xdp_buff structures in the heads array. We can do
this as the heads array size is equal to the number of chunks in the
umem for the aligned case. Then every entry in this array will reflect
a certain chunk/frame and can therefore be prepopulated with the
correct values and we can drop the use of the free_heads stack. Note
that it is not possible to allocate more buffers than what has been
allocated in the aligned case since each chunk can only contain a
single buffer.
We can unfortunately not do this in the unaligned case as one chunk
might contain multiple buffers. In this case, we keep the old scheme
of populating a heads entry every time it is used and using
the free_heads stack.
Also move xp_release() and xp_get_handle() to xsk_buff_pool.h. They
were for some reason in xsk.c even though they are buffer pool
operations.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-7-magnus.karlsson@gmail.com
Add a new driver interface xsk_buff_alloc_batch() offering batched
buffer allocations to improve performance. The new interface takes
three arguments: the buffer pool to allocated from, a pointer to an
array of struct xdp_buff pointers which will contain pointers to the
allocated xdp_buffs, and an unsigned integer specifying the max number
of buffers to allocate. The return value is the actual number of
buffers that the allocator managed to allocate and it will be in the
range 0 <= N <= max, where max is the third parameter to the function.
u32 xsk_buff_alloc_batch(struct xsk_buff_pool *pool, struct xdp_buff **xdp,
u32 max);
A second driver interface is also introduced that need to be used in
conjunction with xsk_buff_alloc_batch(). It is a helper that sets the
size of struct xdp_buff and is used by the NIC Rx irq routine when
receiving a packet. This helper sets the three struct members data,
data_meta, and data_end. The two first ones is in the xsk_buff_alloc()
case set in the allocation routine and data_end is set when a packet
is received in the receive irq function. This unfortunately leads to
worse performance since the xdp_buff is touched twice with a long time
period in between leading to an extra cache miss. Instead, we fill out
the xdp_buff with all 3 fields at one single point in time in the
driver, when the size of the packet is known. Hence this helper. Note
that the driver has to use this helper (or set all three fields
itself) when using xsk_buff_alloc_batch(). xsk_buff_alloc() works as
before and does not require this.
void xsk_buff_set_size(struct xdp_buff *xdp, u32 size);
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-3-magnus.karlsson@gmail.com
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XDP_REDIRECT works by a three-step process: the bpf_redirect() and
bpf_redirect_map() helpers will lookup the target of the redirect and store
it (along with some other metadata) in a per-CPU struct bpf_redirect_info.
Next, when the program returns the XDP_REDIRECT return code, the driver
will call xdp_do_redirect() which will use the information thus stored to
actually enqueue the frame into a bulk queue structure (that differs
slightly by map type, but shares the same principle). Finally, before
exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will
flush all the different bulk queues, thus completing the redirect.
Pointers to the map entries will be kept around for this whole sequence of
steps, protected by RCU. However, there is no top-level rcu_read_lock() in
the core code; instead drivers add their own rcu_read_lock() around the XDP
portions of the code, but somewhat inconsistently as Martin discovered[0].
However, things still work because everything happens inside a single NAPI
poll sequence, which means it's between a pair of calls to
local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could
document this intention by using rcu_dereference_check() with
rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and
lockdep to verify that everything is done correctly.
This patch does just that: we add an __rcu annotation to the map entry
pointers and remove the various comments explaining the NAPI poll assurance
strewn through devmap.c in favour of a longer explanation in filter.c. The
goal is to have one coherent documentation of the entire flow, and rely on
the RCU annotations as a "standard" way of communicating the flow in the
map code (which can additionally be understood by sparse and lockdep).
The RCU annotation replacements result in a fairly straight-forward
replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE()
becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the
proper constructs to cast the pointer back and forth between __rcu and
__kernel address space (for the benefit of sparse). The one complication is
that xskmap has a few constructions where double-pointers are passed back
and forth; these simply all gain __rcu annotations, and only the final
reference/dereference to the inner-most pointer gets changed.
With this, everything can be run through sparse without eliciting
complaints, and lockdep can verify correctness even without the use of
rcu_read_lock() in the drivers. Subsequent patches will clean these up from
the drivers.
[0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/
[1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
Fix broken Tx ring validation for AF_XDP. The commit under the Fixes
tag, fixed an off-by-one error in the validation but introduced
another error. Descriptors are now let through even if they straddle a
chunk boundary which they are not allowed to do in aligned mode. Worse
is that they are let through even if they straddle the end of the umem
itself, tricking the kernel to read data outside the allowed umem
region which might or might not be mapped at all.
Fix this by reintroducing the old code, but subtract the length by one
to fix the off-by-one error that the original patch was
addressing. The test chunk != chunk_end makes sure packets do not
straddle chunk boundraries. Note that packets of zero length are
allowed in the interface, therefore the test if the length is
non-zero.
Fixes: ac31565c21 ("xsk: Fix for xp_aligned_validate_desc() when len == chunk_size")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20210618075805.14412-1-magnus.karlsson@gmail.com
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to
extend xdp_redirect_map for broadcast support.
With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.
When getting the devices in dev hash map via dev_map_hash_get_next_key(),
there is a possibility that we fall back to the first key when a device
was removed. This will duplicate packets on some interfaces. So just walk
the whole buckets to avoid this issue. For dev array map, we also walk the
whole map to find valid interfaces.
Function bpf_clear_redirect_map() was removed in
commit ee75aef23a ("bpf, xdp: Restructure redirect actions").
Add it back as we need to use ri->map again.
With test topology:
+-------------------+ +-------------------+
| Host A (i40e 10G) | ---------- | eno1(i40e 10G) |
+-------------------+ | |
| Host B |
+-------------------+ | |
| Host C (i40e 10G) | ---------- | eno2(i40e 10G) |
+-------------------+ | |
| +------+ |
| veth0 -- | Peer | |
| veth1 -- | | |
| veth2 -- | NS | |
| +------+ |
+-------------------+
On Host A:
# pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64
On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory):
Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing.
All the veth peers in the NS have a XDP_DROP program loaded. The
forward_map max_entries in xdp_redirect_map_multi is modify to 4.
Testing the performance impact on the regular xdp_redirect path with and
without patch (to check impact of additional check for broadcast mode):
5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M
5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M
5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M
5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M
Testing the performance when cloning packets with the redirect_map_multi
test, using a redirect map size of 4, filled with 1-3 devices:
5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M
5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M
5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
Use kvcalloc() instead of kcalloc() to support large umems with, on my
server, one million pages or more in the umem.
Reported-by: Dan Siemon <dan@coverfire.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210521083301.26921-1-magnus.karlsson@gmail.com
When desc->len is equal to chunk_size, it is legal. But when the
xp_aligned_validate_desc() got chunk_end from desc->addr + desc->len
pointing to the next chunk during the check, it caused the check to
fail.
This problem was first introduced in bbff2f321a ("xsk: new descriptor
addressing scheme"). Later in 2b43470add ("xsk: Introduce AF_XDP buffer
allocation API") this piece of code was moved into the new function called
xp_aligned_validate_desc(). This function was then moved into xsk_queue.h
via 26062b185e ("xsk: Explicitly inline functions and move definitions").
Fixes: bbff2f321a ("xsk: new descriptor addressing scheme")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210428094424.54435-1-xuanzhuo@linux.alibaba.com
DPDK default burst size is 32, however, kernel xsk sendto
syscall can not handle all 32 at one time, and return with
error.
So make kernel XDP socket batch size larger to avoid
unnecessary syscall fail and context switch which will help
to increase performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1618378752-4191-1-git-send-email-lirongqing@baidu.com
The XDP_REDIRECT implementations for maps and non-maps are fairly
similar, but obviously need to take different code paths depending on
if the target is using a map or not. Today, the redirect targets for
XDP either uses a map, or is based on ifindex.
Here, the map type and id are added to bpf_redirect_info, instead of
the actual map. Map type, map item/ifindex, and the map_id (if any) is
passed to xdp_do_redirect().
For ifindex-based redirect, used by the bpf_redirect() XDP BFP helper,
a special map type/id are used. Map type of UNSPEC together with map id
equal to INT_MAX has the special meaning of an ifindex based
redirect. Note that valid map ids are 1 inclusive, INT_MAX exclusive
([1,INT_MAX[).
In addition to making the code easier to follow, using explicit type
and id in bpf_redirect_info has a slight positive performance impact
by avoiding a pointer indirection for the map type lookup, and instead
use the cacheline for bpf_redirect_info.
Since the actual map is not passed via bpf_redirect_info anymore, the
map lookup is only done in the BPF helper. This means that the
bpf_clear_redirect_map() function can be removed. The actual map item
is RCU protected.
The bpf_redirect_info flags member is not used by XDP, and not
read/written any more. The map member is only written to when
required/used, and not unconditionally.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-3-bjorn.topel@gmail.com
Currently the bpf_redirect_map() implementation dispatches to the
correct map-lookup function via a switch-statement. To avoid the
dispatching, this change adds bpf_redirect_map() as a map
operation. Each map provides its bpf_redirect_map() version, and
correct function is automatically selected by the BPF verifier.
A nice side-effect of the code movement is that the map lookup
functions are now local to the map implementation files, which removes
one additional function call.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-2-bjorn.topel@gmail.com
Currently, the AF_XDP rings uses general smp_{r,w,}mb() barriers on
the kernel-side. On most modern architectures
load-acquire/store-release barriers perform better, and results in
simpler code for circular ring buffers.
This change updates the XDP socket rings to use
load-acquire/store-release barriers.
It is important to note that changing from the old smp_{r,w,}mb()
barriers, to load-acquire/store-release barriers does not break
compatibility. The old semantics work with the new one, and vice
versa.
As pointed out by "Documentation/memory-barriers.txt" in the "SMP
BARRIER PAIRING" section:
"General barriers pair with each other, though they also pair with
most other types of barriers, albeit without multicopy atomicity.
An acquire barrier pairs with a release barrier, but both may also
pair with other barriers, including of course general barriers."
How different barriers behaves and pairs is outlined in
"tools/memory-model/Documentation/cheatsheet.txt".
In order to make sure that compatibility is not broken, LKMM herd7
based litmus tests can be constructed and verified.
We generalize the XDP socket ring to a one entry ring, and create two
scenarios; One where the ring is full, where only the consumer can
proceed, followed by the producer. One where the ring is empty, where
only the producer can proceed, followed by the consumer. Each scenario
is then expanded to four different tests: general producer/general
consumer, general producer/acqrel consumer, acqrel producer/general
consumer, acqrel producer/acqrel consumer. In total eight tests.
The empty ring test:
C spsc-rb+empty
// Simple one entry ring:
// prod cons allowed action prod cons
// 0 0 => prod => 1 0
// 0 1 => cons => 0 0
// 1 0 => cons => 1 1
// 1 1 => prod => 0 1
{}
// We start at prod==0, cons==0, data==0, i.e. nothing has been
// written to the ring. From here only the producer can start, and
// should write 1. Afterwards, consumer can continue and read 1 to
// data. Can we enter state prod==1, cons==1, but consumer observed
// the incorrect value of 0?
P0(int *prod, int *cons, int *data)
{
... producer
}
P1(int *prod, int *cons, int *data)
{
... consumer
}
exists( 1:d=0 /\ prod=1 /\ cons=1 );
The full ring test:
C spsc-rb+full
// Simple one entry ring:
// prod cons allowed action prod cons
// 0 0 => prod => 1 0
// 0 1 => cons => 0 0
// 1 0 => cons => 1 1
// 1 1 => prod => 0 1
{ prod = 1; }
// We start at prod==1, cons==0, data==1, i.e. producer has
// written 0, so from here only the consumer can start, and should
// consume 0. Afterwards, producer can continue and write 1 to
// data. Can we enter state prod==0, cons==1, but consumer observed
// the write of 1?
P0(int *prod, int *cons, int *data)
{
... producer
}
P1(int *prod, int *cons, int *data)
{
... consumer
}
exists( 1:d=1 /\ prod=0 /\ cons=1 );
where P0 and P1 are:
P0(int *prod, int *cons, int *data)
{
int p;
p = READ_ONCE(*prod);
if (READ_ONCE(*cons) == p) {
WRITE_ONCE(*data, 1);
smp_wmb();
WRITE_ONCE(*prod, p ^ 1);
}
}
P0(int *prod, int *cons, int *data)
{
int p;
p = READ_ONCE(*prod);
if (READ_ONCE(*cons) == p) {
WRITE_ONCE(*data, 1);
smp_store_release(prod, p ^ 1);
}
}
P1(int *prod, int *cons, int *data)
{
int c;
int d = -1;
c = READ_ONCE(*cons);
if (READ_ONCE(*prod) != c) {
smp_rmb();
d = READ_ONCE(*data);
smp_mb();
WRITE_ONCE(*cons, c ^ 1);
}
}
P1(int *prod, int *cons, int *data)
{
int c;
int d = -1;
c = READ_ONCE(*cons);
if (smp_load_acquire(prod) != c) {
d = READ_ONCE(*data);
smp_store_release(cons, c ^ 1);
}
}
The full LKMM litmus tests are found at [1].
On x86-64 systems the l2fwd AF_XDP xdpsock sample performance
increases by 1%. This is mostly due to that the smp_mb() is removed,
which is a relatively expensive operation on these
platforms. Weakly-ordered platforms, such as ARM64 might benefit even
more.
[1] https://github.com/bjoto/litmus-xsk
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210305094113.413544-2-bjorn.topel@gmail.com
This patch is used to construct skb based on page to save memory copy
overhead.
This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
directly construct skb. If this feature is not supported, it is still
necessary to copy data to construct skb.
---------------- Performance Testing ------------
The test environment is Aliyun ECS server.
Test cmd:
```
xdpsock -i eth0 -t -S -s <msg size>
```
Test result data:
size 64 512 1024 1500
copy 1916747 1775988 1600203 1440054
page 1974058 1953655 1945463 1904478
percent 3.0% 10.0% 21.58% 32.3%
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-6-alobakin@pm.me
xsk_generic_xmit() allocates a new skb and then queues it for
xmitting. The size of new skb's headroom is desc->len, so it comes
to the driver/device with no reserved headroom and/or tailroom.
Lots of drivers need some headroom (and sometimes tailroom) to
prepend (and/or append) some headers or data, e.g. CPU tags,
device-specific headers/descriptors (LSO, TLS etc.), and if case
of no available space skb_cow_head() will reallocate the skb.
Reallocations are unwanted on fast-path, especially when it comes
to XDP, so generic XSK xmit should reserve the spaces declared in
dev->needed_headroom and dev->needed tailroom to avoid them.
Note on max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom)):
Usually, output functions reserve LL_RESERVED_SPACE(dev), which
consists of dev->hard_header_len + dev->needed_headroom, aligned
by 16.
However, on XSK xmit hard header is already here in the chunk, so
hard_header_len is not needed. But it'd still be better to align
data up to cacheline, while reserving no less than driver requests
for headroom. NET_SKB_PAD here is to double-insure there will be
no reallocations even when the driver advertises no needed_headroom,
but in fact need it (not so rare case).
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-5-alobakin@pm.me
Fold xp_assign_dev and __xp_assign_dev. The former directly calls the
latter.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210122105351.11751-3-bjorn.topel@gmail.com
The explicit_free parameter of the __xsk_rcv() function was used to
mark whether the call was via the generic XDP or the native XDP
path. Instead of clutter the code with if-statements and "true/false"
parameters which are hard to understand, simply move the explicit free
to the __xsk_map_redirect() which is always called from the native XDP
path.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210122105351.11751-2-bjorn.topel@gmail.com
Maciej Fijalkowski