The synthesized event TIME_CONV doesn't contain the complete parameters
for counters, this will lead to wrong conversion between counter cycles
and timestamp.
This patch extends event TIME_CONV to record flags 'cap_user_time_zero'
which is used to indicate the counter parameters are valid or not, if
not will directly return 0 for timestamp calculation. And record the
flag 'cap_user_time_short' and its relevant fields 'time_cycles' and
'time_mask' for cycle calibration.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200914115311.2201-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
**perf-<pid>.map and jit-<pid>.dump designs:
When a JIT generates code to be executed, it must allocate memory and
mark it executable using an mmap call.
*** perf-<pid>.map design
The perf-<pid>.map assumes that any sample recorded in an anonymous
memory page is JIT code. It then tries to resolve the symbol name by
looking at the process' perf-<pid>.map.
*** jit-<pid>.dump design
The jit-<pid>.dump mechanism takes a different approach. It requires a
JIT to write a `<path>/jit-<pid>.dump` file. This file must also be
mmapped so that perf inject -jit can find the file. The JIT must also
add JIT_CODE_LOAD records for any functions it generates. The records
are timestamped using a clock which can be correlated to the perf record
clock.
After perf record, the `perf inject -jit` pass parses the recording
looking for a `<path>/jit-<pid>.dump` file. When it finds the file, it
parses it and for each JIT_CODE_LOAD record:
* creates an elf file `<path>/jitted-<pid>-<code_index>.so
* injects a new mmap record mapping the new elf file into the process.
*** Coexistence design
The kernel and perf support both of these mechanisms. We need to make
sure perf works on an app supporting either or both of these mechanisms.
Both designs rely on mmap records to determine how to resolve an ip
address.
The mmap records of both techniques by definition overlap. When the JIT
compiles a method, it must:
* allocate memory (mmap)
* add execution privilege (mprotect or mmap. either will
generate an mmap event form the kernel to perf)
* compile code into memory
* add a function record to perf-<pid>.map and/or jit-<pid>.dump
Because the jit-<pid>.dump mechanism supports greater capabilities, perf
prefers the symbols from jit-<pid>.dump. It implements this based on
timestamp ordering of events. There is an implicit ASSUMPTION that the
JIT_CODE_LOAD record timestamp will be after the // anon mmap event that
was generated during memory allocation or adding the execution privilege setting.
*** Problems with the ASSUMPTION
The ASSUMPTION made in the Coexistence design section above is violated
in the following scenario.
*** Scenario
While a JIT is jitting code it will eventually need to commit more
pages and change these pages to executable permissions. Typically the
JIT will want these collocated to minimize branch displacements.
The kernel will coalesce these anonymous mapping with identical
permissions before sending an MMAP event for the new pages. The address
range of the new mmap will not be just the most recently mmap pages.
It will include the entire coalesced mmap region.
See mm/mmap.c
unsigned long mmap_region(struct file *file, unsigned long addr,
unsigned long len, vm_flags_t vm_flags, unsigned long pgoff,
struct list_head *uf)
{
...
/*
* Can we just expand an old mapping?
*/
...
perf_event_mmap(vma);
...
}
*** Symptoms
The coalesced // anon mmap event will be timestamped after the
JIT_CODE_LOAD records. This means it will be used as the most recent
mapping for that entire address range. For remaining events it will look
at the inferior perf-<pid>.map for symbols.
If both mechanisms are supported, the symbol will appear twice with
different module names. This causes weird behavior in reporting.
If only jit-<pid>.dump is supported, the symbol will no longer be resolved.
** Implemented solution
This patch solves the issue by removing // anon mmap events for any
process which has a valid jit-<pid>.dump file.
It tracks on a per process basis to handle the case where some running
apps support jit-<pid>.dump, but some only support perf-<pid>.map.
It adds new assumptions:
* // anon mmap events are only required for perf-<pid>.map support.
* An app that uses jit-<pid>.dump, no longer needs
perf-<pid>.map support. It assumes that any perf-<pid>.map info is
inferior.
*** Details
Use thread->priv to store whether a jitdump file has been processed
During "perf inject --jit", discard "//anon*" mmap events for any pid which
has sucessfully processed a jitdump file.
** Testing:
// jitdump case
perf record <app with jitdump>
perf inject --jit --input perf.data --output perfjit.data
// verify mmap "//anon" events present initially
perf script --input perf.data --show-mmap-events | grep '//anon'
// verify mmap "//anon" events removed
perf script --input perfjit.data --show-mmap-events | grep '//anon'
// no jitdump case
perf record <app without jitdump>
perf inject --jit --input perf.data --output perfjit.data
// verify mmap "//anon" events present initially
perf script --input perf.data --show-mmap-events | grep '//anon'
// verify mmap "//anon" events not removed
perf script --input perfjit.data --show-mmap-events | grep '//anon'
** Repro:
This issue was discovered while testing the initial CoreCLR jitdump
implementation. https://github.com/dotnet/coreclr/pull/26897.
** Alternate solutions considered
These were also briefly considered:
* Change kernel to not coalesce mmap regions.
* Change kernel reporting of coalesced mmap regions to perf. Only
include newly mapped memory.
* Only strip parts of // anon mmap events overlapping existing
jitted-<pid>-<code_index>.so mmap events.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1590544271-125795-1-git-send-email-steve.maclean@linux.microsoft.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200515172926.GA31976@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records
with an incorrect filename. Specifically it was missing the ".so" suffix.
Further the JIT_CODE_LOAD record were silently truncating the
jr->load.code_index field to 32 bits before generating the filename.
Make both records emit the same filename based on the full 64 bit
code_index field.
Fixes: 9b07e27f88 ("perf inject: Add jitdump mmap injection support")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that builtin.h isn't included by any other header, we can check
where it is really needed, i.e. we can remove it and be sure that it
isn't being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mn7jheex85iw9qo6tlv26hb2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where the equivalent was already being done, i.e.:
free(a);
a = NULL;
And in placs where struct members are being freed so that if we have
some erroneous reference to its struct, then accesses to freed members
will result in segfaults, which we can detect faster than use after free
to areas that may still have something seemingly valid.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-jatyoofo5boc1bsvoig6bb6i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fixup the fallout in places like annotation and jitdump that were
using things like dirname() but weren't including libgen.h, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wrii9hy1a1wathc0398f9fgt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Just typos in comments, no need to backport, reducing the possibility of
possible backporting artifacts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places where we just need a forward declaration, and others
were we need to include strlist.h and/or strfilter.h, reducing the
impact of changes in headers on the build time, do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both do the same thing, the later is the one we get from
linux/stringify.h, i.e. we now use the same function name/practice as
the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w2sxa5o4bfx7fjrd5mu4zmke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check the version number when opening a jitdump file. Accept older
versions, but not newer ones.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-9-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the jit_buf_desc contains unwinding information, it is emitted as
eh_frame unwinding sections in the DSOs generated by perf inject.
The unwinding information is required to unwind of JITed code which do
not maintain the frame pointer register during function calls. It can
be emitted by V8 / Chromium when the --perf_prof_unwinding_info is
passed to V8.
The eh_frame and eh_frame_hdr sections are emitted immediately after the
.text.
The .eh_frame is aligned at a 8-byte boundary, and .eh_frame_hdr at a
4-byte one. Since size of the .eh_frame is required to be a multiple of
the word size, which means there will never be additional padding
between it and the .eh_frame_hdr on machines where the word size is 4 or
8 bytes.
However, additional padding might be inserted between .text and
.eh_frame to reach the correct alignment, which will always be 8 bytes,
also on 32bit machines. The reasoning behind this choice is that 4 extra
bytes of padding worst case are not a large cost for the advantage of
removing word-size dependent offset calculations when emitting the
jitdump.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-8-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This record is intended to provide unwinding information in the
eh_frame format. This is required to unwind JITed code which
does not maintain the frame pointer register during function calls.
The eh_frame unwinding information can be emitted by V8 / Chromium
when the --perf_prof_unwinding_info is passed.
A record of type jr_code_unwinding_info comes before the jr_code_load
it referred to and contains both the .eh_frame and .eh_frame_hdr.
The fields in the header have the following meaning:
* unwinding_size: size of the eh_frame and eh_frame_hdr, necessary
for distinguishing the content from the padding.
* eh_frame_hdr_size: as the name says.
* mapped_size: size of the payload that was in memory at runtime.
typically unwinding_size if the .eh_frame_hdr and .eh_frame were
mapped, or 0 if they weren't. It should always be the former case,
since the .eh_frame is guaranteed to be mapped in memory. However,
certain JITs might want to inject an .eh_frame_hdr with an empty LUT
to trigger fp-based unwinding fallback in libunwind. The only part
of the .eh_frame_hdr that libunwind reads from remote memory is the
LUT, and since there is none, mapping the unwinding info in memory
is not necessary, and 0 in this field signifies that it wasn't.
This practical hack allows to save bytes in code memory for those
JIT compilers that might or might not maintain a valid frame pointer.
The payload that follows is assumed to contain first the .eh_frame and
then the .eh_header_hdr, with no padding between the two.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-7-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The behavior before this commit was to skip the remaining portion of the
jitdump in case an unknown record was found, including those records
that perf could handle.
With this change, parsing a record with an unknown id will cause a
warning to be emitted, the record will be skipped and parsing will
resume from the next (valid) one.
The patch aims at making perf more future proof, by extracting as much
information as possible from jitdumps.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the loop body isn't executed at all, then the 'ret' local variable,
that is uninitialized will be used as the return value.
This triggers this error on Alpine Linux:
CC /tmp/build/perf/util/demangle-java.o
CC /tmp/build/perf/util/demangle-rust.o
CC /tmp/build/perf/util/jitdump.o
CC /tmp/build/perf/util/genelf.o
util/jitdump.c: In function 'jit_process':
util/jitdump.c:622:3: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fprintf(stderr, "injected: %s (%d)\n", path, ret);
^
util/jitdump.c:584:6: note: 'ret' was declared here
int ret;
^
FLEX /tmp/build/perf/util/parse-events-flex.c
/ $ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-alpine-linux-musl/5.3.0/lto-wrapper
Target: x86_64-alpine-linux-musl
Configured with: /home/buildozer/aports/main/gcc/src/gcc-5.3.0/configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
+--build=x86_64-alpine-linux-musl --host=x86_64-alpine-linux-musl --target=x86_64-alpine-linux-musl --with-pkgversion='Alpine 5.3.0' --enable-checking=release
+--disable-fixed-point --disable-libstdcxx-pch --disable-multilib --disable-nls --disable-werror --disable-symvers --enable-__cxa_atexit --enable-esp
+--enable-cloog-backend --enable-languages=c,c++,objc,java,fortran,ada --disable-libssp --disable-libmudflap --disable-libsanitizer --enable-shared
+--enable-threads --enable-tls --with-system-zlib
Thread model: posix
gcc version 5.3.0 (Alpine 5.3.0)
But this so far got under the radar, not causing any build problem, till the
"perf jit: enable jitdump support without dwarf" gets applied, when the above
problem takes place, some combination of inlining or whatever, the problem
is real, so fix it by initializing the variable to zero.
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maciej Debski <maciejd@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/r/20161013200437.GA12815@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed on Fedora Rawhide:
$ gcc --version
gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4)
$ rpm -q glibc
glibc-2.24.90-1.fc26.x86_64
$
CC /tmp/build/perf/util/jitdump.o
util/jitdump.c: In function 'jit_repipe_code_load':
util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
event->mmap2.maj = major(st.st_dev);
^~~~~
In file included from /usr/include/features.h:397:0,
from /usr/include/sys/types.h:25,
from util/jitdump.c:1:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
Fix it following that recomendation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code is memsetting the 'struct stat' variable 'st' with the size of
'stat' (which turns out to be 1 byte) rather than the size of variable 'sz'.
Committer notes:
sizeof(function) isn't valid, the result depends on the compiler used, with
gcc, enabling pedantic warnings we get:
$ cat sizeof_function.c
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <stdio.h>
int main(void)
{
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
return 0;
}
$ readelf -sW sizeof_function | grep -w stat
49: 0000000000400630 16 FUNC WEAK HIDDEN 13 stat
$ cc -pedantic sizeof_function.c -o sizeof_function
sizeof_function.c: In function ‘main’:
sizeof_function.c:8:46: warning: invalid application of ‘sizeof’ to a function type [-Wpointer-arith]
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
^
$ ./sizeof_function
sizeof(stat)=1, stat=0x400630
$
Standard C, section 6.5.3.4:
"The sizeof operator shall not be applied to an expression that has function
type or an incomplete type, to the parenthesized name of such a type,
or to an expression that designates a bit-field member."
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 9b07e27f88 ("perf inject: Add jitdump mmap injection support")
Link: http://lkml.kernel.org/r/1461020838-9260-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses TSC as a timestamp, so add support for using TSC instead
of the monotonic clock. Use of TSC is selected by an environment
variable "JITDUMP_USE_ARCH_TIMESTAMP" and flagged in the jitdump file
with flag JITDUMP_FLAGS_ARCH_TIMESTAMP.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457426330-30226-1-git-send-email-adrian.hunter@intel.com
[ Added the fixup from He Kuang to make it build on other arches, ]
[ such as aarch64, to avoid inserting this bisectiong breakage upstream ]
Link: http://lkml.kernel.org/r/1459482572-129494-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 473398a21d ("perf tools: Add cpumode to struct perf_sample"), I
missed some places where perf_sample fields are directly initialized in
addition to what is done in perf_evsel__parse_sample(), namely when
synthesizing PERF_RECORD_{MMAP*,COMM,FORK,EXIT} for pre-existing threads
and also in intel_pt and intel_bts when synthesizing events from
processor trace, the jitdump code also was affected, fix it.
The problem was noticed with running:
# perf record -e intel_pt//u true
# perf script
Where the samples wouldn't get resolved because perf_sample.cpumode
would be left as zero, i.e. PERF_RECORD_MISC_CPUMODE_UNKNOWN, not
resolving as kernel, hypervisor or user cpu modes.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 473398a21d ("perf tools: Add cpumode to struct perf_sample")
Link: http://lkml.kernel.org/n/tip-n5sdauxgk24d5nun8kuuu2mh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move clockid validation into jit_process() so it can later be made
conditional.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for moving clockid validation into jit_process().
Previously a return value of zero meant the processing had been done and
non-zero meant either the processing was not done (i.e. not the jitdump
file mmap event) or an error occurred.
Change it so that zero means the processing was not done, one means the
processing was done and successful, and negative values are an error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds source line information support to perf for jitted code.
The source line info must be emitted by the runtime, such as JVMTI.
Perf injects extract the source line info from the jitdump file and adds
the corresponding .debug_lines section in the ELF image generated for
each jitted function.
The source line enables matching any address in the profile with a
source file and line number.
The improvement is visible in perf annotate with the source code
displayed alongside the assembly code.
The dwarf code leverages the support from OProfile which is also
released under GPLv2. Copyright 2007 OProfile authors.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a --jit/-j option to perf inject.
This options injects MMAP records into the perf.data file to cover the
jitted code mmaps. It also emits ELF images for each function in the
jidump file. Those images are created where the jitdump file is. The
MMAP records point to that location as well.
Typical flow:
$ perf record -k mono -- java -agentpath:libpjvmti.so java_class
$ perf inject --jit -i perf.data -o perf.data.jitted
$ perf report -i perf.data.jitted
Note that jitdump.h support is not limited to Java, it works with any
jitted environment modified to emit the jitdump file format, include
those where code can be jitted multiple times and moved around.
The jitdump.h format is adapted from the Oprofile project.
The genelf.c (ELF binary generation) depends on MD5 hash encoding for
the buildid. To enable this, libssl-dev must be installed. If not, then
genelf.c defaults to using urandom to generate the buildid, which is not
ideal. The Makefile auto-detects the presence on libssl-dev.
This version mmaps the jitdump file to create a marker MMAP record in
the perf.data file. The marker is used to detect jitdump and cause perf
inject to inject the jitted mmaps and generate ELF images for jitted
functions.
In V8, the following fixes and changes were made among other things:
- the jidump header format include a new flags field to be used
to carry information about the configuration of the runtime agent.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file
at which the code resides.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic
objects to match the file offset.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all
MMAP events in one go, so it does not obey finished_round semantics, so drop the
finished_round events from the output perf.data file.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan