journal_clean_one_cp_list() has been merged into
journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the
committing process is just a best effort, it should stop scan once it
meet a busy buffer, or else it will cause a lot of invalid buffer scan
and checks. We catch a performance regression when doing fs_mark tests
below.
Test cmd:
./fs_mark -d scratch -s 1024 -n 10000 -t 1 -D 100 -N 100
Before merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8304.9 49033
After merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 7649.0 50012
FSUse% Count Size Files/sec App Overhead
95 10000 1024 2107.1 50871
After merging checkpoint buffer cleanup, the total loop count in
journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~
100,000+ in general), most of them are invalid. This patch fix it
through passing 'shrink_type' into journal_shrink_one_cp_list() and add
a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy
buffer. After fix, the loop count descending back to 10,000+.
After this fix:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8558.4 49109
Cc: stable@kernel.org
Fixes: b98dba273a ("jbd2: remove journal_clean_one_cp_list()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We named criteria with CR_XXX, correct stale comment to criteria with
raw number.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not
used.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace the traditional ternary conditional operator with with max()/min()
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return at end of void function is unnecessary, just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.
No functional changes are intended in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The multi-mount protection kthread checks for read-only filesystem and
aborts in that case. The remount code actually handles stopping of the
kthread on remount so the only purpose of the check is in case of
emergency remount read-only. Replace the check for read-only filesystem
with a check for shutdown filesystem as running MMP on such is risky
anyway and it makes ordering of things during remount simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 code will quickly return without doing anything when there's
nothing to commit so there's no point in the read-only check in
ext4_force_commit(). Just drop it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should not have dirty inodes on read-only filesystem. Also silently
bailing without writing anything would be a problem when we enable
quotas during remount while the filesystem is read-only. So drop the
read-only check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We better should not be initializing inode tables on read-only
filesystem. The following transaction start will warn us and make the
function bail anyway so drop the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that filesystem abort marks the filesystem as shutdown, we shouldn't
be ever hitting the sb_rdonly() check in ext4_journal_check_start().
Since this is a suitable place for catching all sorts of programming
errors, convert the check to WARN_ON instead of dropping it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the filesystem gets first remounted read-only and then unmounted,
ext4_quota_off() will try to start a transaction (and fail) on read-only
filesystem to cleanup inode flags for legacy quota files. Just bail
before trying to start a transaction instead since that is going to
issue a warning.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_MF_FS_ABORTED flag has practically the same intent as
EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more
places than the aborted flag which is mostly the historical artifact
where we were relying on SB_RDONLY checks instead of the aborted flag
checks. There are only three places - ext4_sync_file(),
__ext4_remount(), and mballoc debug code - which check aborted flag and
not shutdown flag and this is arguably a bug. Avoid these
inconsistencies by removing EXT4_MF_FS_ABORTED flag and using
EXT4_FLAGS_SHUTDOWN everywhere.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_load(), when journal_reset fails, it prints an incorrect
warn log.
Fix this by changing the goto statement to return statement.
Also, return actual error code from jbd2_journal_recover() and journal_reset().
Signed-off-by: Guoqing Cai <u202112087@hust.edu.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230413095740.2222066-1-u202112087@hust.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
checkpoint code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmS9HHIACgkQ8vlZVpUN
gaNg/wf8DAf9PMn2bmQ309Acs5E8Qi1bga/ofNnoBcDNC7k+iKGAGgwOnCn+ity4
32KiA5Yh7tzoYvZHUTE5k297mN+4AX4DyAREh1cVITohRxm3BpXYZzezdLSieS8b
7RAdOinaWzs0dBjwNqkKVrTL3jduD704DnefrtHFvwqzBf/QSVSaACoPACqCFyxx
TFvutv2h5ifjS7fsjKXrXjHUAYMJCYzJNOcTW1OUb8rknUhCaKyoCkFht4PawuVx
h1wTkP87RW/bTgHA7Kqrq4BY2nLg8U0B3U/4qmW7wMjUYyAPLTUXKD3Ewj7XaFMA
UYRBr7xba8GWqyOURb3TvzrwRjqTJg==
=inak
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's
checkpoint code"
* tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rbtree traversal bug in ext4_mb_use_preallocated
ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()
ext4: correct inline offset when handling xattrs in inode body
jbd2: remove __journal_try_to_free_buffer()
jbd2: fix a race when checking checkpoint buffer busy
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
jbd2: remove journal_clean_one_cp_list()
jbd2: remove t_checkpoint_io_list
jbd2: recheck chechpointing non-dirty buffer
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmS8M7gACgkQiiy9cAdy
T1HwFQv+KkynZAnDOcjOBADzR3yVoH82KMksgi7Paw8QlQYCQ+Fu3i3+WFcTKWEk
W/v2sm+F/5P8d2wjiuQKX3gzJrDQZcoyrpyhdV66abg1qursyUQitvbEEnQXwh4e
9rTFEggTD9ior2/g35QVkPvf94sMpw525cI90btT4CL2WWzM7O7+cz48JtElaLJx
NvqWc83r3Fn6kkeZn3LmwniTtNL3Cez0EOcL7SKVfOtXOlBiqxsotC6LrCJZ0Wgr
DSiNAmq71tirfe6/b1+XIbJx0Pn4f8snxvfVW2/+FOaxx0qyT7JJHgWtUNocjHLs
PESdve7fOlLYDLgQc+qfzmZrMQvsuEiGT49Zgh11Bmp55OBplIggiUjr1/gUVX2K
F/WQz6IHhsbbVQDOkqnoRYjnBWsrDcSzjy/E6twHZvllSQDalCZCNHlpdKT8jIvw
u8mbHQA92Xe0EPp/KHP+dP6OzntGNdl07qdBFc983KCHSWJxSw94tgI3Jk57alVA
tSZkv8Th
=HN3q
-----END PGP SIGNATURE-----
Merge tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"Add minor debugging improvement.
The change improves ability to read a network trace to debug problems
on encrypted connections which are very common (e.g. using wireshark
or tcpdump).
That works today with tools like 'smbinfo keys /mnt/file' but requires
passing in a filename on the mount (see e.g. [1]), but it often makes
more sense to just pass in the mount point path (ie a directory not a
filename).
So this fix was needed to debug some types of problems (an obvious
example is on an encrypted connection failing operations on an empty
share or with no files in the root of the directory) - so you can
simply pass in the 'smbinfo keys <mntpoint>' and get the information
that wireshark needs"
Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1]
* tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: allow dumping keys for directories too
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/
Cc: stable@kernel.org # 6.4
Fixes: 3872778664 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).
After all the processing:
order = 1 order below goal len
min_order = maximum of the three:-
- order - trim_order
- 1 order below B2C(s_stripe)
- 1 order above original len
Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.
Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.
This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Fix a bug wherein a failed write could clobber short write status.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZLVjtwAKCRBKO3ySh0YR
pjuyAQCzUYzZEzAMz7xNBrpvNc7bSgBo6ktEidiBYH0UVcRh8AEA8oURNOBXFl8l
QyqdkM43eIBx4ovwLYZwGk0snNW2KAk=
=MDl3
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"Fix partial write regression.
It turns out that fstests doesn't have any test coverage for short
writes, but LTP does. Fortunately, this was caught right after -rc1
was tagged.
Summary:
- Fix a bug wherein a failed write could clobber short write status"
* tag 'iomap-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: micro optimize the ki_pos assignment in iomap_file_buffered_write
iomap: fix a regression for partial write errors
* Convert all the array[1] declarations into the accepted flex array[]
declarations so that UBSAN and friends will not get confused.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZLVpLAAKCRBKO3ySh0YR
pqVmAQDfWBiCir9goUuuz0bngUBy6PeHP9b9zIfVy1WPBDj2ZwEAyIzIhjqs7u41
ShaaMWDhI8kubvrG0+ELe+dwkxe/8Qc=
=L6u/
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Flexarray declaration conversions.
This probably should've been done with the merge window open, but I
was not aware that the UBSAN knob would be getting turned up for 6.5,
and the fstests failures due to the kernel warnings are getting in the
way of testing.
Summary:
- Convert all the array[1] declarations into the accepted flex
array[] declarations so that UBSAN and friends will not get
confused"
* tag 'xfs-6.5-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert flex-array declarations in xfs attr shortform objects
xfs: convert flex-array declarations in xfs attr leaf blocks
xfs: convert flex-array declarations in struct xfs_attrlist*
-----BEGIN PGP SIGNATURE-----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=yO9Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Stable fixes:
- fix race between balance and cancel/pause
- various iput() fixes
- fix use-after-free of new block group that became unused
- fix warning when putting transaction with qgroups enabled after
abort
- fix crash in subpage mode when page could be released between map
and map read
- when scrubbing raid56 verify the P/Q stripes unconditionally
- fix minor memory leak in zoned mode when a block group with an
unexpected superblock is found
Regression fixes:
- fix ordered extent split error handling when submitting direct IO
- user irq-safe locking when adding delayed iputs"
* tag 'for-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix warning when putting transaction with qgroups enabled after abort
btrfs: fix ordered extent split error handling in btrfs_dio_submit_io
btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
btrfs: raid56: always verify the P/Q contents for scrub
btrfs: use irq safe locking when running and adding delayed iputs
btrfs: fix iput() on error pointer after error during orphan cleanup
btrfs: fix double iput() on inode after an error during orphan cleanup
btrfs: zoned: fix memory leak after finding block group with super blocks
btrfs: fix use-after-free of new block group that became unused
btrfs: be a bit more careful when setting mirror_num_ret in btrfs_map_block
btrfs: fix race between balance and cancel/pause
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZJLBrQAKCRDh3BK/laaZ
PMGXAQC+EWva3wi86A4MeRAGtVnpQyKeFKRsBjEpU2MKdhvVhQEAn5eCsQAtt/R/
+1WmLVF2uAweoG6eXBKnWx7537dbQAs=
=MdDc
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Small but important fixes and a trivial cleanup"
* tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: ioctl: translate ENOSYS in outarg
fuse: revalidate: don't invalidate if interrupted
fuse: Apply flags2 only when userspace set the FUSE_INIT_EXT
fuse: remove duplicate check for nodeid
fuse: add feature flag for expire-only
When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling. btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case. Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.
Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f6937 ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[REGRESSION]
Commit 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery
path to use error_bitmap") changed the behavior of scrub_rbio().
Initially if we have no error reading the raid bio, we will assign
@need_check to true, then finish_parity_scrub() would later verify the
content of P/Q stripes before writeback.
But after that commit we never verify the content of P/Q stripes and
just writeback them.
This can lead to unrepaired P/Q stripes during scrub, or already
corrupted P/Q copied to the dev-replace target.
[FIX]
The situation is more complex than the regression, in fact the initial
behavior is not 100% correct either.
If we have the following rare case, it can still lead to the same
problem using the old behavior:
0 16K 32K 48K 64K
Data 1: |IIIIIII| |
Data 2: | |
Parity: | |CCCCCCC| |
Where "I" means IO error, "C" means corruption.
In the above case, we're scrubbing the parity stripe, then read out all
the contents of Data 1, Data 2, Parity stripes.
But found IO error in Data 1, which leads to rebuild using Data 2 and
Parity and got the correct data.
In that case, we would not verify if the Parity is correct for range
[16K, 32K).
So here we have to always verify the content of Parity no matter if we
did recovery or not.
This patch would remove the @need_check parameter of
finish_parity_scrub() completely, and would always do the P/Q
verification before writeback.
Fixes: 75b4703329 ("btrfs: raid56: migrate recovery and scrub recovery path to use error_bitmap")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running delayed iputs, which never happens in an irq context, needs to
lock the spinlock fs_info->delayed_iput_lock. When finishing bios for
data writes (irq context, bio.c) we call btrfs_put_ordered_extent() which
needs to add a delayed iput and for that it needs to acquire the spinlock
fs_info->delayed_iput_lock. Without disabling irqs when running delayed
iputs we can therefore deadlock on that spinlock. The same deadlock can
also happen when adding an inode to the delayed iputs list, since this
can be done outside an irq context as well.
Syzbot recently reported this, which results in the following trace:
================================
WARNING: inconsistent lock state
6.4.0-syzkaller-09904-ga507db1d8fdc #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btrfs-cleaner/16079 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
ffff888107804d20 (&fs_info->delayed_iput_lock){+.?.}-{2:2}, at: btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
{IN-SOFTIRQ-W} state was registered at:
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_add_delayed_iput+0x128/0x390 fs/btrfs/inode.c:3490
btrfs_put_ordered_extent fs/btrfs/ordered-data.c:559 [inline]
btrfs_put_ordered_extent+0x2f6/0x610 fs/btrfs/ordered-data.c:547
__btrfs_bio_end_io fs/btrfs/bio.c:118 [inline]
__btrfs_bio_end_io+0x136/0x180 fs/btrfs/bio.c:112
btrfs_orig_bbio_end_io+0x86/0x2b0 fs/btrfs/bio.c:163
btrfs_simple_end_io+0x105/0x380 fs/btrfs/bio.c:378
bio_endio+0x589/0x690 block/bio.c:1617
req_bio_endio block/blk-mq.c:766 [inline]
blk_update_request+0x5c5/0x1620 block/blk-mq.c:911
blk_mq_end_request+0x59/0x680 block/blk-mq.c:1032
lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
blk_complete_reqs+0xb3/0xf0 block/blk-mq.c:1110
__do_softirq+0x1d4/0x905 kernel/softirq.c:553
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x31/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
irq event stamp: 39
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] __do_kmem_cache_free mm/slab.c:3558 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last enabled at (39): [<ffffffff81d5ebc4>] kmem_cache_free+0x244/0x370 mm/slab.c:3575
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] __do_kmem_cache_free mm/slab.c:3553 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free mm/slab.c:3582 [inline]
hardirqs last disabled at (38): [<ffffffff81d5eb5e>] kmem_cache_free+0x1de/0x370 mm/slab.c:3575
softirqs last enabled at (0): [<ffffffff814ac99f>] copy_process+0x227f/0x75c0 kernel/fork.c:2448
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->delayed_iput_lock);
<Interrupt>
lock(&fs_info->delayed_iput_lock);
*** DEADLOCK ***
1 lock held by btrfs-cleaner/16079:
#0: ffff888107804860 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x103/0x4b0 fs/btrfs/disk-io.c:1463
stack backtrace:
CPU: 3 PID: 16079 Comm: btrfs-cleaner Not tainted 6.4.0-syzkaller-09904-ga507db1d8fdc #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_usage_bug kernel/locking/lockdep.c:3978 [inline]
valid_state kernel/locking/lockdep.c:4020 [inline]
mark_lock_irq kernel/locking/lockdep.c:4223 [inline]
mark_lock.part.0+0x1102/0x1960 kernel/locking/lockdep.c:4685
mark_lock kernel/locking/lockdep.c:4649 [inline]
mark_usage kernel/locking/lockdep.c:4598 [inline]
__lock_acquire+0x8e4/0x5e20 kernel/locking/lockdep.c:5098
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5726
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
btrfs_run_delayed_iputs+0x28/0xe0 fs/btrfs/inode.c:3523
cleaner_kthread+0x2e5/0x4b0 fs/btrfs/disk-io.c:1478
kthread+0x344/0x440 kernel/kthread.c:389
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
So fix this by using spin_lock_irq() and spin_unlock_irq() when running
delayed iputs, and using spin_lock_irqsave() and spin_unlock_irqrestore()
when adding a delayed iput().
Reported-by: syzbot+da501a04be5ff533b102@syzkaller.appspotmail.com
Fixes: ec63b84d46 ("btrfs: add an ordered_extent pointer to struct btrfs_bio")
Link: https://lore.kernel.org/linux-btrfs/000000000000d5c89a05ffbd39dd@google.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we can't find an inode (btrfs_iget() returns
an -ENOENT error pointer), we proceed with 'ret' set to -ENOENT and the
inode pointer set to ERR_PTR(-ENOENT). Later when we proceed to the body
of the following if statement:
if (ret == -ENOENT || inode->i_nlink) {
(...)
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
iput(inode);
goto out;
}
(...)
ret = btrfs_del_orphan_item(trans, root,
found_key.objectid);
btrfs_end_transaction(trans);
if (ret) {
iput(inode);
goto out;
}
continue;
}
If we get an error from btrfs_start_transaction() or from the call to
btrfs_del_orphan_item() we end calling iput() against an inode pointer
that has a value of ERR_PTR(-ENOENT), resulting in a crash with the
following trace:
[876.667] BUG: kernel NULL pointer dereference, address: 0000000000000096
[876.667] #PF: supervisor read access in kernel mode
[876.667] #PF: error_code(0x0000) - not-present page
[876.667] PGD 0 P4D 0
[876.668] Oops: 0000 [#1] PREEMPT SMP PTI
[876.668] CPU: 0 PID: 2356187 Comm: mount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[876.668] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[876.668] RIP: 0010:iput+0xa/0x20
[876.668] Code: ff ff ff 66 (...)
[876.669] RSP: 0018:ffffafa9c0c9f9d0 EFLAGS: 00010282
[876.669] RAX: ffffffffffffffe4 RBX: 000000000009453b RCX: 0000000000000000
[876.669] RDX: 0000000000000001 RSI: ffffafa9c0c9f930 RDI: fffffffffffffffe
[876.669] RBP: ffff95c612f3b800 R08: 0000000000000001 R09: ffffffffffffffe4
[876.670] R10: 00018f2a71010000 R11: 000000000ead96e3 R12: ffff95cb7d6909a0
[876.670] R13: fffffffffffffffe R14: ffff95c60f477000 R15: 00000000ffffffe4
[876.670] FS: 00007f5fbe30a840(0000) GS:ffff95ccdfa00000(0000) knlGS:0000000000000000
[876.670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[876.671] CR2: 0000000000000096 CR3: 000000055e9f6004 CR4: 0000000000370ef0
[876.671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[876.671] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[876.672] Call Trace:
[876.744] <TASK>
[876.744] ? __die_body+0x1b/0x60
[876.744] ? page_fault_oops+0x15d/0x450
[876.745] ? __kmem_cache_alloc_node+0x47/0x410
[876.745] ? do_user_addr_fault+0x65/0x8a0
[876.745] ? exc_page_fault+0x74/0x170
[876.746] ? asm_exc_page_fault+0x22/0x30
[876.746] ? iput+0xa/0x20
[876.746] btrfs_orphan_cleanup+0x221/0x330 [btrfs]
[876.746] btrfs_lookup_dentry+0x58f/0x5f0 [btrfs]
[876.747] btrfs_lookup+0xe/0x30 [btrfs]
[876.747] __lookup_slow+0x82/0x130
[876.785] walk_component+0xe5/0x160
[876.786] path_lookupat.isra.0+0x6e/0x150
[876.786] filename_lookup+0xcf/0x1a0
[876.786] ? mod_objcg_state+0xd2/0x360
[876.786] ? obj_cgroup_charge+0xf5/0x110
[876.787] ? should_failslab+0xa/0x20
[876.787] ? kmem_cache_alloc+0x47/0x450
[876.787] vfs_path_lookup+0x51/0x90
[876.788] mount_subtree+0x8d/0x130
[876.788] btrfs_mount+0x149/0x410 [btrfs]
[876.788] ? __kmem_cache_alloc_node+0x47/0x410
[876.788] ? vfs_parse_fs_param+0xc0/0x110
[876.789] legacy_get_tree+0x24/0x50
[876.834] vfs_get_tree+0x22/0xd0
[876.852] path_mount+0x2d8/0x9c0
[876.852] do_mount+0x79/0x90
[876.852] __x64_sys_mount+0x8e/0xd0
[876.853] do_syscall_64+0x38/0x90
[876.899] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[876.958] RIP: 0033:0x7f5fbe50b76a
[876.959] Code: 48 8b 0d a9 (...)
[876.959] RSP: 002b:00007fff01925798 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[876.959] RAX: ffffffffffffffda RBX: 00007f5fbe694264 RCX: 00007f5fbe50b76a
[876.960] RDX: 0000561bde6c8720 RSI: 0000561bde6bdec0 RDI: 0000561bde6c31a0
[876.960] RBP: 0000561bde6bdc70 R08: 0000000000000000 R09: 0000000000000001
[876.960] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[876.960] R13: 0000561bde6c31a0 R14: 0000561bde6c8720 R15: 0000561bde6bdc70
[876.960] </TASK>
So fix this by setting 'inode' to NULL whenever we get an error from
btrfs_iget(), and to make the code simpler, stop testing for 'ret' being
-ENOENT to check if we have an inode - instead test for 'inode' being NULL
or not. Having a NULL 'inode' prevents any iput() call from crashing, as
iput() ignores NULL inode pointers. Also, stop testing for a NULL return
value from btrfs_iget() with PTR_ERR_OR_ZERO(), because btrfs_iget() never
returns NULL - in case an inode is not found, it returns ERR_PTR(-ENOENT),
and in case of memory allocation failure, it returns ERR_PTR(-ENOMEM).
We also don't need the extra iput() calls on the error branches for the
btrfs_start_transaction() and btrfs_del_orphan_item() calls, as we have
already called iput() before, so remove them.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_orphan_cleanup(), if we were able to find the inode, we do an
iput() on the inode, then if btrfs_drop_verity_items() succeeds and then
either btrfs_start_transaction() or btrfs_del_orphan_item() fail, we do
another iput() in the respective error paths, resulting in an extra iput()
on the inode.
Fix this by setting inode to NULL after the first iput(), as iput()
ignores a NULL inode pointer argument.
Fixes: a13bb2c038 ("btrfs: add missing iputs on orphan cleanup failure")
CC: stable@vger.kernel.org # 6.4
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.
Fixes: 12659251ca ("btrfs: implement log-structured superblock for ZONED mode")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have the new value for ki_pos right at hand in iter.pos, so assign
that instead of recalculating it from ret.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.harjani@gmail.com>
When write* wrote some data it should return the amount of written data
and not the error code that caused it to stop. Fix a recent regression
in iomap_file_buffered_write that caused it to return the errno instead.
Fixes: 219580eea1 ("iomap: update ki_pos in iomap_file_buffered_write")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.harjani@gmail.com>
As of 6.5-rc1, UBSAN trips over the ondisk extended attribute shortform
definitions using an array length of 1 to pretend to be a flex array.
Kernel compilers have to support unbounded array declarations, so let's
correct this.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
As of 6.5-rc1, UBSAN trips over the ondisk extended attribute leaf block
definitions using an array length of 1 to pretend to be a flex array.
Kernel compilers have to support unbounded array declarations, so let's
correct this.
================================================================================
UBSAN: array-index-out-of-bounds in fs/xfs/libxfs/xfs_attr_leaf.c:2535:24
index 2 is out of range for type '__u8 [1]'
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x50
__ubsan_handle_out_of_bounds+0x9c/0xd0
xfs_attr3_leaf_getvalue+0x2ce/0x2e0 [xfs 4a986a89a77bb77402ab8a87a37da369ef6a3f09]
xfs_attr_leaf_get+0x148/0x1c0 [xfs 4a986a89a77bb77402ab8a87a37da369ef6a3f09]
xfs_attr_get_ilocked+0xae/0x110 [xfs 4a986a89a77bb77402ab8a87a37da369ef6a3f09]
xfs_attr_get+0xee/0x150 [xfs 4a986a89a77bb77402ab8a87a37da369ef6a3f09]
xfs_xattr_get+0x7d/0xc0 [xfs 4a986a89a77bb77402ab8a87a37da369ef6a3f09]
__vfs_getxattr+0xa3/0x100
vfs_getxattr+0x87/0x1d0
do_getxattr+0x17a/0x220
getxattr+0x89/0xf0
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Zhang Yi