Tkci depending on "make tencentconfig", add it. And this is compatible
with TK4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: aurelianliu <aurelianliu@tencent.com>
[ Upstream commit 0281b919e175bb9c3128bd3872ac2903e9436e3f ]
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period.
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 079be8fc630943d9fc70a97807feb73d169ee3fc upstream.
The validation of the value written to sched_rt_period_us was broken
because:
- the sysclt_sched_rt_period is declared as unsigned int
- parsed by proc_do_intvec()
- the range is asserted after the value parsed by proc_do_intvec()
Because of this negative values written to the file were written into a
unsigned integer that were later on interpreted as large positive
integers which did passed the check:
if (sysclt_sched_rt_period <= 0)
return EINVAL;
This commit fixes the parsing by setting explicit range for both
perid_us and runtime_us into the sched_rt_sysctls table and processes
the values with proc_dointvec_minmax() instead.
Alternatively if we wanted to use full range of unsigned int for the
period value we would have to split the proc_handler and use
proc_douintvec() for it however even the
Documentation/scheduller/sched-rt-group.rst describes the range as 1 to
INT_MAX.
As far as I can tell the only problem this causes is that the sysctl
file allows writing negative values which when read back may confuse
userspace.
There is also a LTP test being submitted for these sysctl files at:
http://patchwork.ozlabs.org/project/ltp/patch/20230901144433.2526-1-chrubis@suse.cz/
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-2-chrubis@suse.cz
Cc: Mahmoud Adam <mngyadam@amazon.com>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conflicts:
arch/x86/kernel/cpu/microcode/core.c: we have backported
microcode refractor, so LTS fix not needed.
drivers/block/nbd.c: conflict with nbd_ignore_blksize_set
Signed-off-by: Kairui Song <kasong@tencent.com>
commit 5264a2f4bb3baf712e19f1f053caaa8d7d3afa2e upstream.
The eventfs_create_dir() function returns error pointers, it never returns
NULL. Update the check to reflect that.
Link: https://lore.kernel.org/linux-trace-kernel/ff641474-84e2-46a7-9d7a-62b251a1050c@moroto.mountain
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 5790b1fb3d67 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ddd8baa4857709b4e5d84b376d735152851955b upstream.
The system_callback() function in trace_events.c is only used within that
file. The "static" annotation was missed.
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310051743.y9EobbUr-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 944d5fe50f3f03daacfea16300e656a1691c4a23 upstream.
On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything. So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine.
Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Fixes: 22e4ebb975 ("membarrier: Provide expedited private command")
Fixes: c5f58bd58f ("membarrier: Provide GLOBAL_EXPEDITED command")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2819f23ac12ce93ff79ca7a54597df9a4a1f6331 upstream.
The update to removing the eventfs_file changed the way the events top
level directory was handled. Instead of returning a dentry, it now returns
the eventfs_inode. In this changed, the removing of the events top level
directory is not much different than removing any of the other
directories. Because of this, the removal just called eventfs_remove_dir()
instead of eventfs_remove_events_dir().
Although eventfs_remove_dir() does the clean up, it misses out on the
dget() of the ei->dentry done in eventfs_create_events_dir(). It makes
more sense to match eventfs_create_events_dir() with a specific function
eventfs_remove_events_dir() and this specific function can then perform
the dput() to the dentry that had the dget() when it was created.
Fixes: 5790b1fb3d67 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310051743.y9EobbUr-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5790b1fb3d672d9a1fe3881a7181dfdbe741568f upstream.
Instead of having a descriptor for every file represented in the eventfs
directory, only have the directory itself represented. Change the API to
send in a list of entries that represent all the files in the directory
(but not other directories). The entry list contains a name and a callback
function that will be used to create the files when they are accessed.
struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry *parent,
const struct eventfs_entry *entries,
int size, void *data);
is used for the top level eventfs directory, and returns an eventfs_inode
that will be used by:
struct eventfs_inode *eventfs_create_dir(const char *name, struct eventfs_inode *parent,
const struct eventfs_entry *entries,
int size, void *data);
where both of the above take an array of struct eventfs_entry entries for
every file that is in the directory.
The entries are defined by:
typedef int (*eventfs_callback)(const char *name, umode_t *mode, void **data,
const struct file_operations **fops);
struct eventfs_entry {
const char *name;
eventfs_callback callback;
};
Where the name is the name of the file and the callback gets called when
the file is being created. The callback passes in the name (in case the
same callback is used for multiple files), a pointer to the mode, data and
fops. The data will be pointing to the data that was passed in
eventfs_create_dir() or eventfs_create_events_dir() but may be overridden
to point to something else, as it will be used to point to the
inode->i_private that is created. The information passed back from the
callback is used to create the dentry/inode.
If the callback fills the data and the file should be created, it must
return a positive number. On zero or negative, the file is ignored.
This logic may also be used as a prototype to convert entire pseudo file
systems into just-in-time allocation.
The "show_events_dentry" file has been updated to show the directories,
and any files they have.
With just the eventfs_file allocations:
Before after deltas for meminfo (in kB):
MemFree: -14360
MemAvailable: -14260
Buffers: 40
Cached: 24
Active: 44
Inactive: 48
Inactive(anon): 28
Active(file): 44
Inactive(file): 20
Dirty: -4
AnonPages: 28
Mapped: 4
KReclaimable: 132
Slab: 1604
SReclaimable: 132
SUnreclaim: 1472
Committed_AS: 12
Before after deltas for slabinfo:
<slab>: <objects> [ * <size> = <total>]
ext4_inode_cache 27 [* 1184 = 31968 ]
extent_status 102 [* 40 = 4080 ]
tracefs_inode_cache 144 [* 656 = 94464 ]
buffer_head 39 [* 104 = 4056 ]
shmem_inode_cache 49 [* 800 = 39200 ]
filp -53 [* 256 = -13568 ]
dentry 251 [* 192 = 48192 ]
lsm_file_cache 277 [* 32 = 8864 ]
vm_area_struct -14 [* 184 = -2576 ]
trace_event_file 1748 [* 88 = 153824 ]
kmalloc-1k 35 [* 1024 = 35840 ]
kmalloc-256 49 [* 256 = 12544 ]
kmalloc-192 -28 [* 192 = -5376 ]
kmalloc-128 -30 [* 128 = -3840 ]
kmalloc-96 10581 [* 96 = 1015776 ]
kmalloc-64 3056 [* 64 = 195584 ]
kmalloc-32 1291 [* 32 = 41312 ]
kmalloc-16 2310 [* 16 = 36960 ]
kmalloc-8 9216 [* 8 = 73728 ]
Free memory dropped by 14,360 kB
Available memory dropped by 14,260 kB
Total slab additions in size: 1,771,032 bytes
With this change:
Before after deltas for meminfo (in kB):
MemFree: -12084
MemAvailable: -11976
Buffers: 32
Cached: 32
Active: 72
Inactive: 168
Inactive(anon): 176
Active(file): 72
Inactive(file): -8
Dirty: 24
AnonPages: 196
Mapped: 8
KReclaimable: 148
Slab: 836
SReclaimable: 148
SUnreclaim: 688
Committed_AS: 324
Before after deltas for slabinfo:
<slab>: <objects> [ * <size> = <total>]
tracefs_inode_cache 144 [* 656 = 94464 ]
shmem_inode_cache -23 [* 800 = -18400 ]
filp -92 [* 256 = -23552 ]
dentry 179 [* 192 = 34368 ]
lsm_file_cache -3 [* 32 = -96 ]
vm_area_struct -13 [* 184 = -2392 ]
trace_event_file 1748 [* 88 = 153824 ]
kmalloc-1k -49 [* 1024 = -50176 ]
kmalloc-256 -27 [* 256 = -6912 ]
kmalloc-128 1864 [* 128 = 238592 ]
kmalloc-64 4685 [* 64 = 299840 ]
kmalloc-32 -72 [* 32 = -2304 ]
kmalloc-16 256 [* 16 = 4096 ]
total = 721352
Free memory dropped by 12,084 kB
Available memory dropped by 11,976 kB
Total slab additions in size: 721,352 bytes
That's over 2 MB in savings per instance for free and available memory,
and over 1 MB in savings per instance of slab memory.
Link: https://lore.kernel.org/linux-trace-kernel/20231003184059.4924468e@gandalf.local.home
Link: https://lore.kernel.org/linux-trace-kernel/20231004165007.43d79161@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdbddb109c75365d22ec4826f480c5e75869e1cb upstream.
Commit a8b9cf62ade1 ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by
default") attempted to fix an issue with direct trampolines on x86, see
its description for details. However, it wrongly referenced the
HAVE_DYNAMIC_FTRACE_WITH_REGS config option and the problem is still
present.
Add the missing "CONFIG_" prefix for the logic to work as intended.
Link: https://lore.kernel.org/linux-trace-kernel/20240213132434.22537-1-petr.pavlu@suse.com
Fixes: a8b9cf62ade1 ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8b9cf62ade1bf17261a979fc97e40c2d7842353 upstream.
The commit 60c8971899 ("ftrace: Make DIRECT_CALLS work WITH_ARGS
and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there
are multiple ftrace_ops at the same function, but since the x86 only
support to jump to direct_call from ftrace_regs_caller, when we set
the function tracer on the same target function on x86, ftrace-direct
does not work as below (this actually works on arm64.)
At first, insmod ftrace-direct.ko to put a direct_call on
'wake_up_process()'.
# insmod kernel/samples/ftrace/ftrace-direct.ko
# less trace
...
<idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63
<idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63
Setup a function filter to the 'wake_up_process' too, and enable it.
# cd /sys/kernel/tracing/
# echo wake_up_process > set_ftrace_filter
# echo function > current_tracer
# less trace
...
<idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn
<idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn
<idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool
<idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool
Then, only function tracer is shown on x86.
But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag)
on the same function, it is shown again.
# echo 'p wake_up_process' >> dynamic_events
# echo 1 > events/kprobes/p_wake_up_process_0/enable
# echo > trace
# less trace
...
<idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17
To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of
direct_call by default.
Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2
Fixes: 60c8971899 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS")
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66bbea9ed6446b8471d365a22734dc00556c4785 upstream.
The return type for ring_buffer_poll_wait() is __poll_t. This is behind
the scenes an unsigned where we can set event bits. In case of a
non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us,
this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so
user-space at least is aware something went wrong.
Nonetheless, this is an incorrect code. Replace that -EINVAL with a
proper EPOLLERR to clean that output. As this doesn't change the
behaviour, there's no need to treat this change as a bug fix.
Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com
Cc: stable@vger.kernel.org
Fixes: 6721cb6002 ("ring-buffer: Do not poll non allocated cpu buffers")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aac8a59537dfc704ff344f1aacfd143c089ee20f upstream.
This reverts commit ca10d851b9.
The commit allowed workqueue_apply_unbound_cpumask() to clear __WQ_ORDERED
on now removed implicitly ordered workqueues. This was incorrect in that
system-wide config change shouldn't break ordering properties of all
workqueues. The reason why apply_workqueue_attrs() path was allowed to do so
was because it was targeting the specific workqueue - either the workqueue
had WQ_SYSFS set or the workqueue user specifically tried to change
max_active, both of which indicate that the workqueue doesn't need to be
ordered.
The implicitly ordered workqueue promotion was removed by the previous
commit 3bc1e711c26b ("workqueue: Don't implicitly make UNBOUND workqueues w/
@max_active==1 ordered"). However, it didn't update this path and broke
build. Let's revert the commit which was incorrect in the first place which
also fixes build.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3bc1e711c26b ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered")
Fixes: ca10d851b9 ("workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9704669c386f9bbfef2e002e7e690c56b7dcf5de upstream.
Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.
Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/
Fixes: 302db0f5b3 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a571c1e275cedacd48c66a6bddd0c23f1dffdbf upstream.
Since the BTF type setting updates probe_arg::type, the type size
calculation and setting print-fmt should be done after that.
Without this fix, the argument size and print-fmt can be wrong.
Link: https://lore.kernel.org/all/170602218196.215583.6417859469540955777.stgit@devnote2/
Fixes: b576e09701 ("tracing/probes: Support function parameters if BTF is available")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c427cc2fa73684ea140999e121b7b6c1c717632 upstream.
Fix to show a parse error for bad type (non-string) for $comm/$COMM and
immediate-string. With this fix, error_log file shows appropriate error
message as below.
/sys/kernel/tracing # echo 'p vfs_read $comm:u32' >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/tracing # echo 'p vfs_read \"hoge":u32' >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/tracing # cat error_log
[ 30.144183] trace_kprobe: error: $comm and immediate-string only accepts string type
Command: p vfs_read $comm:u32
^
[ 62.618500] trace_kprobe: error: $comm and immediate-string only accepts string type
Command: p vfs_read \"hoge":u32
^
Link: https://lore.kernel.org/all/170602215411.215583.2238016352271091852.stgit@devnote2/
Fixes: 3dd1f7f24f ("tracing: probeevent: Fix to make the type of $comm string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b6326354cf9a41521b79287da3bfab022ae0b6d upstream.
Fix trace_string() by assigning the string length to the return variable
which got lost in commit ddeea494a1 ("tracing/synthetic: Use union
instead of casts") and caused trace_string() to always return 0.
Link: https://lore.kernel.org/linux-trace-kernel/20240214220555.711598-1-thorsten.blum@toblux.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: ddeea494a1 ("tracing/synthetic: Use union instead of casts")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44dc5c41b5b1267d4dd037d26afc0c4d3a568acb upstream.
While looking at improving the saved_cmdlines cache I found a huge amount
of wasted memory that should be used for the cmdlines.
The tracing data saves pids during the trace. At sched switch, if a trace
occurred, it will save the comm of the task that did the trace. This is
saved in a "cache" that maps pids to comms and exposed to user space via
the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by
default 128 comms.
The structure that uses this creates an array to store the pids using
PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure
to be of the size of 131104 bytes on 64 bit machines.
In hex: 131104 = 0x20020, and since the kernel allocates generic memory in
powers of two, the kernel would allocate 0x40000 or 262144 bytes to store
this structure. That leaves 131040 bytes of wasted space.
Worse, the structure points to an allocated array to store the comm names,
which is 16 bytes times the amount of names to save (currently 128), which
is 2048 bytes. Instead of allocating a separate array, make the structure
end with a variable length string and use the extra space for that.
This is similar to a recommendation that Linus had made about eventfs_inode names:
https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/
Instead of allocating a separate string array to hold the saved comms,
have the structure end with: char saved_cmdlines[]; and round up to the
next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN
It will use this extra space for the saved_cmdline portion.
Now, instead of saving only 128 comms by default, by using this wasted
space at the end of the structure it can save over 8000 comms and even
saves space by removing the need for allocating the other array.
Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 939c7a4f04 ("tracing: Introduce saved_cmdlines_size file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0958b33ef5a04ed91f61cef4760ac412080c4e08 upstream.
Fix register_snapshot_trigger() to return error code if it failed to
allocate a snapshot instead of 0 (success). Unless that, it will register
snapshot trigger without an error.
Link: https://lore.kernel.org/linux-trace-kernel/170622977792.270660.2789298642759362200.stgit@devnote2
Fixes: 0bbe7f7199 ("tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation")
Cc: stable@vger.kernel.org
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dad6a09f3148257ac1773cd90934d721d68ab595 upstream.
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 388a1fb7da6aaa1970c7e2a7d7fcd983a87a8484 ]
Thomas reported that commit 652ffc2104ec ("perf/core: Fix narrow
startup race when creating the perf nr_addr_filters sysfs file") made
the entire attribute group vanish, instead of only the nr_addr_filters
attribute.
Additionally a stray return.
Insufficient coffee was involved with both writing and merging the
patch.
Fixes: 652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/r/20231122100756.GP8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06e5c999f10269a532304e89a6adb2fbfeb0593c ]
generic_map_{delete,update}_batch() doesn't set uattr->batch.count as
zero before it tries to allocate memory for key. If the memory
allocation fails, the value of uattr->batch.count will be incorrect.
Fix it by setting uattr->batch.count as zero beore batched update or
deletion.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231208102355.2628918-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79d93b3c6ffd79abcd8e43345980aa1e904879c4 ]
Both map deletion operation, map release and map free operation use
fd_array_map_delete_elem() to remove the element from fd array and
need_defer is always true in fd_array_map_delete_elem(). For the map
deletion operation and map release operation, need_defer=true is
necessary, because the bpf program, which accesses the element in fd
array, may still alive. However for map free operation, it is certain
that the bpf program which owns the fd array has already been exited, so
setting need_defer as false is appropriate for map free operation.
So fix it by adding need_defer parameter to bpf_fd_array_map_clear() and
adding a new helper __fd_array_map_delete_elem() to handle the map
deletion, map release and map free operations correspondingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 022732e3d846e197539712e51ecada90ded0572a ]
When auditd_set sets the auditd_conn pointer, audit messages can
immediately be put on the socket by other kernel threads. If the backlog
is large or the rate is high, this can immediately fill the socket
buffer. If the audit daemon requested an ACK for this operation, a full
socket buffer causes the ACK to get dropped, also setting ENOBUFS on the
socket.
To avoid this race and ensure ACKs get through, fast-track the ACK in
this specific case to ensure it is sent before auditd_conn is set.
Signed-off-by: Chris Riches <chris.riches@nutanix.com>
[PM: fix some tab vs space damage]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9a574ea9069be30b835a3da772c039993c43369b upstream.
Commit 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs
CPU hotplug") preserved total idle sleep time and iowait sleeptime across
CPU hotplug events.
Similar reasoning applies to the number of idle calls and idle sleeps to
get the proper average of sleep time per idle invocation.
Preserve those fields too.
Fixes: 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug")
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122233534.3094238-1-tim.c.chen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 644649553508b9bacf0fc7a5bdc4f9e0165576a5 upstream.
There have been reports of the watchdog marking clocksources unstable on
machines with 8 NUMA nodes:
clocksource: timekeeping watchdog on CPU373:
Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_nsec: 14523447520
clocksource: 'tsc' cs_nsec: 14524115132
The measured clocksource skew - the absolute difference between cs_nsec
and wd_nsec - was 668 microseconds:
cs_nsec - wd_nsec = 14524115132 - 14523447520 = 667612
The kernel used 200 microseconds for the uncertainty_margin of both the
clocksource and watchdog, resulting in a threshold of 400 microseconds (the
md variable). Both the cs_nsec and the wd_nsec value indicate that the
readout interval was circa 14.5 seconds. The observed behaviour is that
watchdog checks failed for large readout intervals on 8 NUMA node
machines. This indicates that the size of the skew was directly proportinal
to the length of the readout interval on those machines. The measured
clocksource skew, 668 microseconds, was evaluated against a threshold (the
md variable) that is suited for readout intervals of roughly
WATCHDOG_INTERVAL, i.e. HZ >> 1, which is 0.5 second.
The intention of 2e27e793e2 ("clocksource: Reduce clocksource-skew
threshold") was to tighten the threshold for evaluating skew and set the
lower bound for the uncertainty_margin of clocksources to twice
WATCHDOG_MAX_SKEW. Later in c37e85c135 ("clocksource: Loosen clocksource
watchdog constraints"), the WATCHDOG_MAX_SKEW constant was increased to
125 microseconds to fit the limit of NTP, which is able to use a
clocksource that suffers from up to 500 microseconds of skew per second.
Both the TSC and the HPET use default uncertainty_margin. When the
readout interval gets stretched the default uncertainty_margin is no
longer a suitable lower bound for evaluating skew - it imposes a limit
that is far stricter than the skew with which NTP can deal.
The root causes of the skew being directly proportinal to the length of
the readout interval are:
* the inaccuracy of the shift/mult pairs of clocksources and the watchdog
* the conversion to nanoseconds is imprecise for large readout intervals
Prevent this by skipping the current watchdog check if the readout
interval exceeds 2 * WATCHDOG_INTERVAL. Considering the maximum readout
interval of 2 * WATCHDOG_INTERVAL, the current default uncertainty margin
(of the TSC and HPET) corresponds to a limit on clocksource skew of 250
ppm (microseconds of skew per second). To keep the limit imposed by NTP
(500 microseconds of skew per second) for all possible readout intervals,
the margins would have to be scaled so that the threshold value is
proportional to the length of the actual readout interval.
As for why the readout interval may get stretched: Since the watchdog is
executed in softirq context the expiration of the watchdog timer can get
severely delayed on account of a ksoftirqd thread not getting to run in a
timely manner. Surely, a system with such belated softirq execution is not
working well and the scheduling issue should be looked into but the
clocksource watchdog should be able to deal with it accordingly.
Fixes: 2e27e793e2 ("clocksource: Reduce clocksource-skew threshold")
Suggested-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122172350.GA740@incl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b184c8c2889ceef0a137c7d0567ef9fe3d92276e upstream.
For a CONFIG_SPARSE_IRQ=n kernel, early_irq_init() is supposed to
initialize all interrupt descriptors.
It does except for irq_desc::resend_node, which ia only initialized for the
first descriptor.
Use the indexed decriptor and not the base pointer to address that.
Fixes: bc06a9e087 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240122085716.2999875-5-dawei.li@shingroup.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53e380d21441909b12b6e0782b77187ae4b971c4 ]
As prep for adding unix socket support to the cgroup sockaddr hooks,
let's add a kfunc bpf_sock_addr_set_sun_path() that allows modifying a unix
sockaddr from bpf. While this is already possible for AF_INET and AF_INET6,
we'll need this kfunc when we add unix socket support since modifying the
address for those requires modifying both the address and the sockaddr
length.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-4-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c5114710c8ce ("xsk: fix usage of multi-buffer BPF helpers for ZC XDP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fefba7d1ae198dcbf8b3b432de46a4e29f8dbd8c ]
As prep for adding unix socket support to the cgroup sockaddr hooks,
let's propagate the sockaddr length back to the caller after running
a bpf cgroup sockaddr hook program. While not important for AF_INET or
AF_INET6, the sockaddr length is important when working with AF_UNIX
sockaddrs as the size of the sockaddr cannot be determined just from the
address family or the sockaddr's contents.
__cgroup_bpf_run_filter_sock_addr() is modified to take the uaddrlen as
an input/output argument. After running the program, the modified sockaddr
length is stored in the uaddrlen pointer.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-3-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c5114710c8ce ("xsk: fix usage of multi-buffer BPF helpers for ZC XDP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e787644caf7628ad3269c1fbd321c3255cf51710 ]
When the CPU goes idle for the last time during the CPU down hotplug
process, RCU reports a final quiescent state for the current CPU. If
this quiescent state propagates up to the top, some tasks may then be
woken up to complete the grace period: the main grace period kthread
and/or the expedited main workqueue (or kworker).
If those kthreads have a SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU. Since this happens
after hrtimers have been migrated at CPUHP_AP_HRTIMERS_DYING stage, the
timer gets ignored. Therefore if the RCU kthreads are waiting for RT
bandwidth to be available, they may never be actually scheduled.
This triggers TREE03 rcutorture hangs:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 4-...!: (1 GPs behind) idle=9874/1/0x4000000000000000 softirq=0/0 fqs=20 rcuc=21071 jiffies(starved)
rcu: (t=21035 jiffies g=938281 q=40787 ncpus=6)
rcu: rcu_preempt kthread starved for 20964 jiffies! g938281 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:14896 pid:14 tgid:14 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2eb/0xa80
schedule+0x1f/0x90
schedule_timeout+0x163/0x270
? __pfx_process_timeout+0x10/0x10
rcu_gp_fqs_loop+0x37c/0x5b0
? __pfx_rcu_gp_kthread+0x10/0x10
rcu_gp_kthread+0x17c/0x200
kthread+0xde/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The situation can't be solved with just unpinning the timer. The hrtimer
infrastructure and the nohz heuristics involved in finding the best
remote target for an unpinned timer would then also need to handle
enqueues from an offline CPU in the most horrendous way.
So fix this on the RCU side instead and defer the wake up to an online
CPU if it's too late for the local one.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b44760609e9eaafc9d234a6883d042fc21132a7 ]
Running the following two commands in parallel on a multi-processor
AArch64 machine can sporadically produce an unexpected warning about
duplicate histogram entries:
$ while true; do
echo hist:key=id.syscall:val=hitcount > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
sleep 0.001
done
$ stress-ng --sysbadaddr $(nproc)
The warning looks as follows:
[ 2911.172474] ------------[ cut here ]------------
[ 2911.173111] Duplicates detected: 1
[ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408
[ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E)
[ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1
[ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01
[ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018
[ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408
[ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408
[ 2911.185310] sp : ffff8000a1513900
[ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001
[ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008
[ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180
[ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff
[ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8
[ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731
[ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c
[ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8
[ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000
[ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480
[ 2911.194259] Call trace:
[ 2911.194626] tracing_map_sort_entries+0x3e0/0x408
[ 2911.195220] hist_show+0x124/0x800
[ 2911.195692] seq_read_iter+0x1d4/0x4e8
[ 2911.196193] seq_read+0xe8/0x138
[ 2911.196638] vfs_read+0xc8/0x300
[ 2911.197078] ksys_read+0x70/0x108
[ 2911.197534] __arm64_sys_read+0x24/0x38
[ 2911.198046] invoke_syscall+0x78/0x108
[ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8
[ 2911.199157] do_el0_svc+0x28/0x40
[ 2911.199613] el0_svc+0x40/0x178
[ 2911.200048] el0t_64_sync_handler+0x13c/0x158
[ 2911.200621] el0t_64_sync+0x1a8/0x1b0
[ 2911.201115] ---[ end trace 0000000000000000 ]---
The problem appears to be caused by CPU reordering of writes issued from
__tracing_map_insert().
The check for the presence of an element with a given key in this
function is:
val = READ_ONCE(entry->val);
if (val && keys_match(key, val->key, map->key_size)) ...
The write of a new entry is:
elt = get_free_elt(map);
memcpy(elt->key, key, map->key_size);
entry->val = elt;
The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;"
stores may become visible in the reversed order on another CPU. This
second CPU might then incorrectly determine that a new key doesn't match
an already present val->key and subsequently insert a new element,
resulting in a duplicate.
Fix the problem by adding a write barrier between
"memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for
good measure, also use WRITE_ONCE(entry->val, elt) for publishing the
element. The sequence pairs with the mentioned "READ_ONCE(entry->val);"
and the "val->key" check which has an address dependency.
The barrier is placed on a path executed when adding an element for
a new key. Subsequent updates targeting the same key remain unaffected.
From the user's perspective, the issue was introduced by commit
c193707dde ("tracing: Remove code which merges duplicates"), which
followed commit cbf4100efb ("tracing: Add support to detect and avoid
duplicates"). The previous code operated differently; it inherently
expected potential races which result in duplicates but merged them
later when they occurred.
Link: https://lore.kernel.org/linux-trace-kernel/20240122150928.27725-1-petr.pavlu@suse.com
Fixes: c193707dde ("tracing: Remove code which merges duplicates")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bb124da69c47dd98d69361ec13244ece50bec63e upstream.
In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:
static int cb(__u32 idx, struct num_context* ctx)
{
ctx->i++;
return 0;
}
SEC("?raw_tp")
int prog(void *_)
{
struct num_context ctx = { .i = 0 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(2, cb, &ctx, 0);
return choice_arr[ctx.i];
}
Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.
This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.
For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab5cfac139ab8576fb54630d4cca23c3e690ee90 upstream.
Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
some identical parent state is found.
Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
calls to avoid previously masked unrelated error reports:
- cb_refs.c:underflow_prog
- exceptions_fail.c:reject_rbtree_add_throw
- exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
log trace:
- verifier_subprog_precision.c:callback_result_precise
(note: r0 precision is no longer propagated inside callback and
I think this is a correct behavior)
- verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
- verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58124a98cb8eda69d248d7f1de954c8b2767c945 upstream.
Move code for simulated stack frame creation to a separate utility
function. This function would be used in the follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 683b96f9606ab7308ffb23c46ab43cecdef8a241 upstream.
Split check_reg_arg() into two utility functions:
- check_reg_arg() operating on registers from current verifier state;
- __check_reg_arg() operating on a specific set of registers passed as
a parameter;
The __check_reg_arg() function would be used by a follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4d8239534fddc036abe4a0fdbf474d9894d4641 upstream.
Additional logging in is_state_visited(): if infinite loop is detected
print full verifier state for both current and equivalent states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a0992829ea3864939d917a5c7b48be6629c6217 upstream.
It turns out that .branches > 0 in is_state_visited() is not a
sufficient condition to identify if two verifier states form a loop
when iterators convergence is computed. This commit adds logic to
distinguish situations like below:
(I) initial (II) initial
| |
V V
.---------> hdr ..
| | |
| V V
| .------... .------..
| | | | |
| V V V V
| ... ... .-> hdr ..
| | | | | |
| V V | V V
| succ <- cur | succ <- cur
| | | |
| V | V
| ... | ...
| | | |
'----' '----'
For both (I) and (II) successor 'succ' of the current state 'cur' was
previously explored and has branches count at 0. However, loop entry
'hdr' corresponding to 'succ' might be a part of current DFS path.
If that is the case 'succ' and 'cur' are members of the same loop
and have to be compared exactly.
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2793a8b015f7f1caadb9bce9c63dc659f7522676 upstream.
Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:
1. r7 = -16
2. r6 = bpf_get_prandom_u32()
3. while (bpf_iter_num_next(&fp[-8])) {
4. if (r6 != 42) {
5. r7 = -32
6. r6 = bpf_get_prandom_u32()
7. continue
8. }
9. r0 = r10
10. r0 += r7
11. r8 = *(u64 *)(r0 + 0)
12. r6 = bpf_get_prandom_u32()
13. }
Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.
Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.
This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
precision marks;
- stack slots have to have identical type.
Unfortunately, this is too strict even for simple programs like below:
i = 0;
while(iter_next(&it))
i++;
At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.
To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.
This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.
Test case iter_task_vma_for_each() presents one of such cases:
unsigned int seen = 0;
...
bpf_for_each(task_vma, vma, task, 0) {
if (seen >= 1000)
break;
...
seen++;
}
Here clang generates the following code:
<LBB0_4>:
24: r8 = r6 ; stash current value of
... body ... 'seen'
29: r1 = r10
30: r1 += -0x8
31: call bpf_iter_task_vma_next
32: r6 += 0x1 ; seen++;
33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL
34: r7 += 0x10
35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000
<LBB0_6>:
... exit ...
Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.
Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.
This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.
[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c97259abc9bc8df7712f76f58ce385581876857 upstream.
Extract same_callsites() from clean_live_states() as a utility function.
This function would be used by the next patch in the set.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c4e420cb6536026ddd50eaaff5f30e4f144200d upstream.
Subsequent patches would make use of explored_state() function.
Move it up to avoid adding unnecessary prototype.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bb943806ff61e83ae4cceef8906b7fe52453e8a upstream.
syscore_shutdown() runs driver and module callbacks to get the system into
a state where it can be correctly shut down. In commit 6f389a8f1d ("PM
/ reboot: call syscore_shutdown() after disable_nonboot_cpus()")
syscore_shutdown() was removed from kernel_restart_prepare() and hence got
(incorrectly?) removed from the kexec flow. This was innocuous until
commit 6735150b69 ("KVM: Use syscore_ops instead of reboot_notifier to
hook restart/shutdown") changed the way that KVM registered its shutdown
callbacks, switching from reboot notifiers to syscore_ops.shutdown. As
syscore_shutdown() is missing from kexec, KVM's shutdown hook is not run
and virtualisation is left enabled on the boot CPU which results in triple
faults when switching to the new kernel on Intel x86 VT-x with VMXE
enabled.
Fix this by adding syscore_shutdown() to the kexec sequence. In terms of
where to add it, it is being added after migrating the kexec task to the
boot CPU, but before APs are shut down. It is not totally clear if this
is the best place: in commit 6f389a8f1d ("PM / reboot: call
syscore_shutdown() after disable_nonboot_cpus()") it is stated that
"syscore_ops operations should be carried with one CPU on-line and
interrupts disabled." APs are only offlined later in machine_shutdown(),
so this syscore_shutdown() is being run while APs are still online. This
seems to be the correct place as it matches where syscore_shutdown() is
run in the reboot and halt flows - they also run it before APs are shut
down. The assumption is that the commit message in commit 6f389a8f1d
("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()") is
no longer valid.
KVM has been discussed here as it is what broke loudly by not having
syscore_shutdown() in kexec, but this change impacts more than just KVM;
all drivers/modules which register a syscore_ops.shutdown callback will
now be invoked in the kexec flow. Looking at some of them like x86 MCE it
is probably more correct to also shut these down during kexec.
Maintainers of all drivers which use syscore_ops.shutdown are added on CC
for visibility. They are:
arch/powerpc/platforms/cell/spu_base.c .shutdown = spu_shutdown,
arch/x86/kernel/cpu/mce/core.c .shutdown = mce_syscore_shutdown,
arch/x86/kernel/i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-sun6i-r.c .shutdown = sun6i_r_intc_shutdown,
drivers/leds/trigger/ledtrig-cpu.c .shutdown = ledtrig_cpu_syscore_shutdown,
drivers/power/reset/sc27xx-poweroff.c .shutdown = sc27xx_poweroff_shutdown,
kernel/irq/generic-chip.c .shutdown = irq_gc_shutdown,
virt/kvm/kvm_main.c .shutdown = kvm_shutdown,
This has been tested by doing a kexec on x86_64 and aarch64.
Link: https://lkml.kernel.org/r/20231213064004.2419447-1-jgowans@amazon.com
Fixes: 6735150b69 ("KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown")
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Alexander Graf <graf@amazon.de>
Cc: Jan H. Schoenherr <jschoenh@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream.
An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes
fails with the following error messaged in the dmesg log:
Invalid LZO compressed length
That happens because when compressing/decompressing the image, the
synchronization between the control thread and the compress/decompress/crc
thread is based on a relaxed ordering interface, which is unreliable, and the
following situation may occur:
CPU 0 CPU 1
save_image_lzo lzo_compress_threadfn
atomic_set(&d->stop, 1);
atomic_read(&data[thr].stop)
data[thr].cmp = data[thr].cmp_len;
WRITE data[thr].cmp_len
Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4,
wrong cmp_len is loaded.
To maintain data consistency between the two threads, use the acquire/release
variants of atomic set and read operations.
Fixes: 081a9d043c ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Co-developed-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
[ rjw: Subject rewrite and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d4b5d7a37bdd63a5a3371b988744b060d5bb86f upstream.
In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.
The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianping Liu