set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.
Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.
This is part of XSA-361.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.
Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.
Also again use GNTST_okay instead of implying its value (zero).
This is part of XSA-361.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
We may not skip setting the field in the unmap structure when
GNTMAP_device_map is in use - such an unmap would fail to release the
respective resources (a page ref in the hypervisor). Otoh the field
doesn't need setting at all when GNTMAP_device_map is not in use.
To record the value for unmapping, we also better don't use our local
p2m: In particular after a subsequent change it may not have got updated
for all the batch elements. Instead it can simply be taken from the
respective map's results.
We can additionally avoid playing this game altogether for the kernel
part of the mappings in (x86) PV mode.
This is part of XSA-361.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
We should not set up further state if either mapping failed; paying
attention to just the user mapping's status isn't enough.
Also use GNTST_okay instead of implying its value (zero).
This is part of XSA-361.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its
only caller (gnttab_map_refs()) don't clean up after themselves in case
of error. Higher level callers are expected to do so. However, in order
for that to really clean up any partially set up state, the operation
should not terminate upon encountering an entry in unexpected state. It
is particularly relevant to notice here that set_foreign_p2m_mapping()
would skip setting up a p2m entry if its grant mapping failed, but it
would continue to set up further p2m entries as long as their mappings
succeeded.
Arguably down the road set_foreign_p2m_mapping() may want its page state
related WARN_ON() also converted to an error return.
This is part of XSA-361.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull LED fix from Pavel Machek:
"One-liner fixing a build problem"
* 'for-rc8-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
-----BEGIN PGP SIGNATURE-----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=Pp2I
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
* tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts: set proper OpenSSL include dir also for sign-file
sparc: remove wrong comment from arch/sparc/include/asm/Kbuild
kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- A fix for the fix to disable CET instrumentation generation for kernel code.
We forgot 32-bit, which we seem to do very often nowadays.
- A Xen PV fix to irqdomain init ordering.
-----BEGIN PGP SIGNATURE-----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=9CtU
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"I kinda knew while typing 'I hope this is the last batch of x86/urgent
updates' last week, Murphy was reading too and uttered 'Hold my
beer!'.
So here's more fixes... Thanks Murphy.
Anyway, three more x86/urgent fixes for 5.11 final. We should be
finally ready (famous last words). :-)
- An SGX use after free fix
- A fix for the fix to disable CET instrumentation generation for
kernel code. We forgot 32-bit, which we seem to do very often
nowadays
- A Xen PV fix to irqdomain init ordering"
* tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
x86/build: Disable CET instrumentation in the kernel for 32-bit too
x86/sgx: Maintain encl->refcount for each encl->mm_list entry
The leds-rt8515 driver can optionall use the v4l2 flash led class,
but it causes a link error when that class is in a loadable module
and the rt8515 driver itself is built-in:
ld.lld: error: undefined symbol: v4l2_flash_init
>>> referenced by leds-rt8515.c
>>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive
drivers/built-in.a
Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that,
but it would make it impossible to use the driver without the
v4l2 support.
Add the same dependency that the other users of this class have
instead, which just prevents the broken configuration.
Fixes: e1c6edcbea ("leds: rt8515: Add Richtek RT8515 LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
These are NOT exported to userspace.
The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
out the correct rate to use. This fixes displays running 4k@60Hz and
some other resolutions that haven't been exercised and fully understood
until now.
-----BEGIN PGP SIGNATURE-----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=jPmu
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One small fix for the Allwinner clk driver so that display clks figure
out the correct rate to use.
This fixes displays running 4k@60Hz and some other resolutions that
haven't been exercised and fully understood until now"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: mp: fix parent rate change flag check
One fix for scsi_debug that fixes a memory leak on module removal.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYCg/NiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaFcAP0UQ9j6
1t9uUiQmYO7elxHuDvf3qLX2i5ZIupa6CXaPsQD/e04hIV4G3OStBJtYz3dY0UjH
RG7aDuJGIYXBiK0pVrk=
=5rfC
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for scsi_debug that fixes a memory leak on module removal"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Fix a memory leak
Pull cgroup fixes from Tejun Heo:
"Two cgroup fixes:
- fix a NULL deref when trying to poll PSI in the root cgroup
- fix confusing controller parsing corner case when mounting cgroup
v1 hierarchies
And doc / maintainer file updates"
* 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: update PSI file description in docs
cgroup: fix psi monitor for root cgroup
MAINTAINERS: Update my email address
MAINTAINERS: Remove stale URLs for cpuset
cgroup-v1: add disabled controller check in cgroup1_parse_param()
Merge fixes from Andrew Morton:
"6 patches.
Subsystems affected by this patch series: mm/pagemap, scripts,
MAINTAINERS, and h8300"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
h8300: fix PREEMPTION build, TI_PRE_COUNT undefined
MAINTAINERS: add Andrey Konovalov to KASAN reviewers
MAINTAINERS: update Andrey Konovalov's email address
MAINTAINERS: update KASAN file list
scripts/recordmcount.pl: support big endian for ARCH sh
m68k: make __pfn_to_phys() and __phys_to_pfn() available for !MMU
Pull i2c fix from Wolfram Sang:
"One more I2C driver bugfix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: fix configuration of the digital filter
-----BEGIN PGP SIGNATURE-----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=7w6G
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A regression fix caused by a refactoring in 5.11.
A corrupted superblock wouldn't be detected by checksum verification
due to wrongly placed initialization of the checksum length, thus
making memcmp always work"
* tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize fs_info::csum_size earlier in open_ctree
Fix a build error for undefined 'TI_PRE_COUNT' by adding it to
asm-offsets.c.
h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT'
Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org
Fixes: df2078b8da ("h8300: Low level entry")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o
sh4-linux-objcopy: Unable to change endianness of input file(s)
sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent changes that obsoleted DISCONTIGMEM on m68k switched the MMU
variant to use generic definitions of __pfn_to_phys() and __phys_to_pfn(),
but missed the !MMU variant which caused a build failure:
drivers/media/common/videobuf2/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr':
drivers/media/common/videobuf2/videobuf2-dma-contig.c:509:5: error: implicit declaration of function '__pfn_to_phys' [-Werror=implicit-function-declaration]
509 | __pfn_to_phys(nums[0]), size, buf->dma_dir, 0);
| ^~~~~~~~~~~~~
cc1: some warnings being treated as errors
Enable __pfn_to_phys() and __phys_to_pfn() on !MMU builds.
Link: https://lkml.kernel.org/r/20210211232202.GS299309@linux.ibm.com
Fixes: 4bfc848e09 ("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=vJKS
-----END PGP SIGNATURE-----
Merge tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel
Pull cifs fixes from Steve French:
"Four small smb3 fixes to the new mount API (including a particularly
important one for DFS links).
These were found in testing this week of additional DFS scenarios, and
a user testing of an apache container problem"
* tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel:
cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.
cifs: In the new mount api we get the full devname as source=
cifs: do not disable noperm if multiuser mount option is not provided
cifs: fix dfs-links
-----BEGIN PGP SIGNATURE-----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=y7ZL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Revert of a patch from this release that caused a regression"
* tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block:
Revert "io_uring: don't take fs for recvmsg/sendmsg"
ttm:
- page pool regression fix.
dp_mst:
- Don't report un-attached ports as connected
amdgpu:
- Blank screen fix
i915:
- Ensure Type-C FIA is powered when initializing
- Fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- Always set HDMI clock rate
- Fix H6 HDMI PHY config
- Fix H6 max frequency
vc4:
- Fix buffer overflow
xlnx:
- Fix memory leak
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJgJf1KAAoJEAx081l5xIa+CwYQAKj4UzfoZnjLH7174FiLsbmJ
DzOXcLIjQkMWSmMUnTmUmUclBSTexXaIm7sUzbHNsjpIet+cjxVQo8UhatOokM48
YrNnYRnkReiy2rLJYMB5tSPDXAh8BNuZDGXiN4AEPdxErFK0DsisDzSSYZJfg01M
Qpt/diCJRu4T3Hr+YletfxWV+Dqq5m79zXmMfr1NlCW4D1V1WLEVW1zyb5rTFiTn
goBis52fL2FWTe9DVFa+VVDqCeQxMxs4/gFsZoY5IMTy/w+4YI9gy4BElnyDcOoW
kWz7rjUNl5Hy1BG3YrH9egzKktlGzqHuD6x8bp/PbQdgL8w9m/hvKghYssByHDs0
WBhEg8gd9XviWRfIdNuFeJ4/jq6kMlmLEzZKbcBUpP7Du5/c3rUMqhHFTilz4y7y
8kNDAG5rtL/9b8um0H2MR179qYspRiL0XhG0HL4YZuopfruhmky8gkRhYcsOHkPR
WYFR321FItpXFTw8/gUdudeEr2KssWZ9Ob2lBO960Or2JEtWPYSk1F3G7SCt6N+L
IalFXYRMG2OfAiNjjiVEiZNFe1dgpfy89tka5bVnVuuBEYx+DjU7ZTl3i4xAxtYG
X8WA1de0FzuYiiEUBrrYe8s6YFBEo4Z20dlA1ghYU/rMEXNfte0RVW8DAdsKiTwd
Bqt8tCb6CblCNPxbkeQ3
=HSyG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for final, there is a ttm regression fix, dp-mst fix,
one amdgpu revert, two i915 fixes, and some misc fixes for sun4i,
xlnx, and vc4.
All pretty quiet and don't think we have any known outstanding
regressions.
ttm:
- page pool regression fix.
dp_mst:
- don't report un-attached ports as connected
amdgpu:
- blank screen fix
i915:
- ensure Type-C FIA is powered when initializing
- fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- always set HDMI clock rate
- fix H6 HDMI PHY config
- fix H6 max frequency
vc4:
- fix buffer overflow
xlnx:
- fix memory leak"
* tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: make sure pool pages are cleared
drm/sun4i: dw-hdmi: Fix max. frequency for H6
drm/sun4i: Fix H6 HDMI PHY configuration
drm/sun4i: dw-hdmi: always set clock rate
drm/sun4i: tcon: set sync polarity for tcon1 channel
drm/i915: Fix overlay frontbuffer tracking
Revert "drm/amd/display: Update NV1x SR latency values"
drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it
drm/dp_mst: Don't report ports connected if nothing is attached to them
drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable
drm/vc4: hvs: Fix buffer overflow with the dlist handling
It was reported that if an trace event was larger than a page
and was filtered, that it caused memory corruption. The reason
is that filtered events first go into a buffer to test the filter
before being written into the ring buffer. Unfortunately,
this write did not check the size.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYCaSHBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqOpAQCUSlZdBxLzs87zeHgXbkMudWvCYSbA
mndzddqtxPXlXwEAsRnO8BERyZnasEdXnJ98JJwQaFFYH0dBCA2pTU2onQc=
=NokV
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix buffer overflow in trace event filter.
It was reported that if an trace event was larger than a page and was
filtered, that it caused memory corruption. The reason is that
filtered events first go into a buffer to test the filter before being
written into the ring buffer. Unfortunately, this write did not check
the size"
* tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check length before giving out the filter buffer
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYCUrYAAKCRCAXGG7T9hj
voF2AP9x3wKo+kYAqlRQrrDBb/AoMezoJ3pFiqJ+1Lg4yK4N6AD+IQxHuIODBfgj
bK12hr5oE6S3e7tTaVWweWzys5UmWA4=
=zleO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue introduced this development cycle: when
running as a Xen guest on Arm systems the kernel will hang during
boot"
* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Don't probe xenbus as part of an early initcall
I have a single fix this week:
* The removal of the GPIO reset method for the Ethernet phy on the
HiFive Unleashed. This returns to relying on the bootloader's phy
reset sequence, which we'll have to cintune doing until we can sort
out how to get the Linux phy driver to perform the special reset
dance required for this phy.
-----BEGIN PGP SIGNATURE-----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=Oqf2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A single fix this week: the removal of the GPIO reset method for the
Ethernet phy on the HiFive Unleashed.
This returns to relying on the bootloader's phy reset sequence, which
we'll have to continue doing until we can sort out how to get the
Linux phy driver to perform the special reset dance required for this
phy"
* tag 'riscv-for-linus-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "dts: phy: add GPIO number and active state used for phy reset"
write.
-----BEGIN PGP SIGNATURE-----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=HYVs
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix PTRACE_PEEKMTETAGS access to an mmapped region before the first
write"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page
The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user
page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged
page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns
-EIO.
A newly created (PROT_MTE) mapping points to the zero page which had its
tags zeroed during cpu_enable_mte(). If there were no prior writes to
this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero
page does not have the PG_mte_tagged flag set.
Set PG_mte_tagged on the zero page when its tags are cleared during
boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on
!PROT_MTE mappings pointing to the zero page, change the
__access_remote_tags() check to (vm_flags & VM_MTE) instead of
PG_mte_tagged.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4a9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.com
User reported that btrfs-progs misc-tests/028-superblock-recover fails:
[TEST/misc] 028-superblock-recover
unexpected success: mounted fs with corrupted superblock
test failed for case 028-superblock-recover
The test case expects that a broken image with bad superblock will be
rejected to be mounted. However, the test image just passed csum check
of superblock and was successfully mounted.
Commit 55fc29bed8 ("btrfs: use cached value of fs_info::csum_size
everywhere") replaces all calls to btrfs_super_csum_size by
fs_info::csum_size. The calls include the place where fs_info->csum_size
is not initialized. So btrfs_check_super_csum() passes because memcmp()
with len 0 always returns 0.
Fix it by caching csum size in btrfs_fs_info::csum_size once we know the
csum type in superblock is valid in open_ctree().
Link: https://github.com/kdave/btrfs-progs/issues/250
Fixes: 55fc29bed8 ("btrfs: use cached value of fs_info::csum_size everywhere")
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The digital filter related computation are present in the driver
however the programming of the filter within the IP is missing.
The maximum value for the DNF is wrong and should be 15 instead of 16.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
drm/i915 fixes for v5.11 final:
- Ensure Type-C FIA is powered when initializing
- Fix overlay frontbuffer tracking
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r1lnc78t.fsf@intel.com
One fix for a regression seen in io_uring, introduced by our support for KUAP
(Kernel User Access Prevention) with the Hash MMU.
Thanks to: Aneesh Kumar K.V, Zorro Lang.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmAlIXsTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgBemD/4pl6wsnmPnoxAKSL1jeJ6XXDOeBRJF
gCk6/NgnH7YUOrQcHhme6Rbs9CMaitidw8tqRwexyjs2AmcAF8lelqsRJHcFPgWt
AYGR0sb00ThI5iMo4heZKMQ/swmHikhZRnH+bx9+fHFgIVoLLCU9bsATSzAM3RXM
+s+bVn8S4dYFx8imC4tYmki2FpZAUzcWhEMP6gTfHoUeP7+GIybDcERBbVoQfBGj
Gqq0nnJxjgXCs9yY/11QevQhqqbeKIyXLvRqm09wGWQacJGti2dd2X5hBWGUeNa1
SMx7ZpnfpGqLudyJBA6XUUBtfbuLZANTJe7CAtYtaYZJ3u75Wd+I5UaHypI+LibC
WvaUC89C/y9DDlhyZqntqiiaYPxvNQxauhbjX4MBJdCXaAZB3GpzqaDCkXB3WUSN
yXlx9hJpFmmumWelWqiuLTdtfMuehj9okLvQ7OSBI5ueQdoxrYw2jeGJPsj3+Zrq
okeMgrDpx3yq4AmcLkTppcYkqT9OJ59A52vk1rCMev0kz44o0sjF0ebiHNpoXZe+
mVRF9RbxYYYCd2YojOqpLm3nQmx0TbB2DSSmE+tkzMS7BZ/ERBtvqzJ0EGmc6af/
zc+K1JoWAMLrAqYX5BgKptVRh9NPcEL08cS6ZrLLXZDYkpcUQAeiVN5aIvc8wamH
iCwIf5hSyKeQ9g==
=iXnC
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a regression seen in io_uring, introduced by our support
for KUAP (Kernel User Access Prevention) with the Hash MMU.
Thanks to Aneesh Kumar K.V, and Zorro Lang"
* tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kuap: Allow kernel thread to access userspace after kthread_use_mm
When filters are used by trace events, a page is allocated on each CPU and
used to copy the trace event fields to this page before writing to the ring
buffer. The reason to use the filter and not write directly into the ring
buffer is because a filter may discard the event and there's more overhead
on discarding from the ring buffer than the extra copy.
The problem here is that there is no check against the size being allocated
when using this page. If an event asks for more than a page size while being
filtered, it will get only a page, leading to the caller writing more that
what was allocated.
Check the length of the request, and if it is more than PAGE_SIZE minus the
header default back to allocating from the ring buffer directly. The ring
buffer may reject the event if its too big anyway, but it wont overflow.
Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Reported-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- don't build gpio-mxs unconditionally with COMPILE_TEST enabled
- fix two problems with interrupt handling in gpio-ep93xx
-----BEGIN PGP SIGNATURE-----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=v5ce
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"This is hopefully the last batch of fixes for this release cycle. We
have a minor fix for a Kconfig regression as well as fixes for older
bugs in gpio-ep93xx:
- don't build gpio-mxs unconditionally with COMPILE_TEST enabled
- fix two problems with interrupt handling in gpio-ep93xx"
* tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ep93xx: Fix single irqchip with multi gpiochips
gpio: ep93xx: fix BUG_ON port F usage
gpio: mxs: GPIO_MXS should not default to y unconditionally
Stephen Rothwell reported a build error on ppc64 when
CONFIG_TRIM_UNUSED_KSYMS is enabled.
Jessica Yu pointed out the cause of the error with the reference to the
ppc64 ELF ABI:
"Symbol names with a dot (.) prefix are reserved for holding entry
point addresses. The value of a symbol named ".FN", if it exists,
is the entry point of the function "FN".
As it turned out, CONFIG_TRIM_UNUSED_KSYMS has never worked for ppc64,
but this issue has been unnoticed until recently because this option
depends on !UNUSED_SYMBOLS hence is disabled by all{mod,yes}config.
(Then, it was uncovered by another patch removing UNUSED_SYMBOLS.)
Removing the dot prefix in scripts/gen_autoksyms.sh fixes the issue.
Please note it must be done before 'sort -u' because modules have
both ._mcount and _mcount undefined when CONFIG_FUNCTION_TRACER=y.
Link: https://lore.kernel.org/lkml/20210209210843.3af66662@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.
While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
so we no longer need to handle or parse the UNC= and prefixpath=
options that mount.cifs are generating.
This also fixes a bug in the mount command option where the devname
would be truncated into just //server/share because we were looking
at the truncated UNC value and not the full path.
I.e. in the mount command output the devive //server/share/path
would show up as just //server/share
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The old implementation wasn't consistend on this.
But it looks like we depend on this so better bring it back.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Fixes: d099fc8f54 ("drm/ttm: new TT backend allocation pool v3")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210160549.1462-1-christian.koenig@amd.com
After Commit 3499ba8198 ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.
If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).
We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.
After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.
Cc: stable@vger.kernel.org
Fixes: 3499ba8198 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
VSC8541 phys need a special reset sequence, which the driver doesn't
currentlny support. As a result enabling the reset via GPIO essentially
guarnteees that the device won't work correctly. We've been relying on
bootloaders to reset the device for years, with this revert we'll go
back to doing so until we can sort out how to get the reset sequence
into the kernel.
This reverts commit a0fa9d7270.
Fixes: a0fa9d7270 ("dts: phy: add GPIO number and active state used for phy reset")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Invoking x86_init.irqs.create_pci_msi_domain() before
x86_init.pci.arch_init() breaks XEN PV.
The XEN_PV specific pci.arch_init() function overrides the default
create_pci_msi_domain() which is obviously too late.
As a consequence the XEN PV PCI/MSI allocation goes through the native
path which runs out of vectors and causes malfunction.
Invoke it after x86_init.pci.arch_init().
Fixes: 6b15ffa07d ("x86/irq: Initialize PCI/MSI domain at PCI init time")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.de
Address a performance regression related to scale-invariance on x86
that may prevent turbo CPU frequencies from being used in certain
workloads on systems using acpi-cpufreq as the CPU performance
scaling driver and schedutil as the scaling governor.
-----BEGIN PGP SIGNATURE-----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=iOYP
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Address a performance regression related to scale-invariance on x86
that may prevent turbo CPU frequencies from being used in certain
workloads on systems using acpi-cpufreq as the CPU performance scaling
driver and schedutil as the scaling governor"
* tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there
cpufreq: ACPI: Extend frequency tables to cover boost frequencies
Revert a problematic ACPICA commit that changed the code to attempt
to update memory regions which may be read-only on some systems (Ard
Biesheuvel).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmAkGeESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx90EQAJvCLtbXhf+AsQbYiDhGwH0VE4EvDjqJ
M3qZL8QDeXx+HRqicdCevpdukk3CAosm468yudwrEIpk7vUTtW2vgjTeVNuH3O4n
Yz7Aw5EXfOO7LGXpZ+oyYPNpPZ9DK5BugpZW6C85qlBPHGzTem7IkoEOEem7lvUV
QwahrwZ4D20/blgunGGt5jx8ilp9YA9wQl0FUaoiAfH7ydoA4YTbFqdcG2jEe9Xb
yQvpLPoD50QTO0Gc1R86C0rehNfVQaXI9L5Nf8w5LU0UPGL2fTWkNwDFga8XvrH/
ZkIVWIFYBF6cgiOaB5TaZ/ufWw7BXe8c2X8lEdn2uJjZ4CXyKBVxAtdiqk+Bf57o
mMszQDwf9hot+fXpq3TDeDhu8KwoLMpHITGxUzZ2Y50wtsb/vwkT45x9PWmUObTz
fXvKbvGWZ/QFABsAGlBCAXUsTsUhkCnBuZ7icbbdG+HAqLg3/QJHvORg7pFYNCJH
wlfChKpoH9n69VIo5Ae5NFxp678rW616E3N1yTF+0OK9uKhVqu7PxqRd9qWLOG4F
Fm/fJB9XtIOzNaVmSqMd8YONpFv1Kf450d8uC3D0QPrCSE9OPl3b+JnqEfhxx2xl
sjcT0UKewwm+H0pTzk/FdYqW1GpTV/5uWu+onhfZvVGePuJCRSJ+URw7FuhUfmiE
iTAT8mV3zo6u
=0hUo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPICA commit that changed the code to attempt to
update memory regions which may be read-only on some systems (Ard
Biesheuvel)"
* tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
Stefano Stabellini