The current implementation of create CQ requires contiguous
memory, such requirement is problematic once the memory is
fragmented or the system is low in memory, it causes for
failures in dma_zalloc_coherent().
This patch implements new scheme of fragmented CQ to overcome
this issue by introducing new type: 'struct mlx5_frag_buf_ctrl'
to allocate fragmented buffers, rather than contiguous ones.
Base the Completion Queues (CQs) on this new fragmented buffer.
It fixes following crashes:
kworker/29:0: page allocation failure: order:6, mode:0x80d0
CPU: 29 PID: 8374 Comm: kworker/29:0 Tainted: G OE 3.10.0
Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
[<>] dump_stack+0x19/0x1b
[<>] warn_alloc_failed+0x110/0x180
[<>] __alloc_pages_slowpath+0x6b7/0x725
[<>] __alloc_pages_nodemask+0x405/0x420
[<>] dma_generic_alloc_coherent+0x8f/0x140
[<>] x86_swiotlb_alloc_coherent+0x21/0x50
[<>] mlx5_dma_zalloc_coherent_node+0xad/0x110 [mlx5_core]
[<>] ? mlx5_db_alloc_node+0x69/0x1b0 [mlx5_core]
[<>] mlx5_buf_alloc_node+0x3e/0xa0 [mlx5_core]
[<>] mlx5_buf_alloc+0x14/0x20 [mlx5_core]
[<>] create_cq_kernel+0x90/0x1f0 [mlx5_ib]
[<>] mlx5_ib_create_cq+0x3b0/0x4e0 [mlx5_ib]
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is no need to repeat the semantics of writel() and similar.
Moreover sparse complains about this:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: expected unsigned long long val
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: got restricted __le64 <noident>
Fixing this by replacing __raw_write*(cpu_to_le*()) calls by plain
write*() ones.
Note, write*() accessors are little endian by definition.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It need to use free_pages function for free the memory allocated
by __get_free_pages function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP can accept receive work requests only when the QP is
in the states that allow them to be submitted.
This patch updates the QP state judgement based on the
specification.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When modifying mac address, it will trigger hns_roce_del_gid
function and can't delete the default gid matched the index
because the attribute of gid is null.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
cxio_dbg.c is uncompiled since commit 2b540355cd ("RDMA/cxgb3: cleanups")
10 years after, we could remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Changes since v1:
Added changes in these files:
drivers/infiniband/hw/usnic/usnic_transport.c
drivers/staging/lustre/lnet/lnet/lib-socket.c
drivers/target/iscsi/iscsi_target_login.c
drivers/vhost/net.c
fs/dlm/lowcomms.c
fs/ocfs2/cluster/tcp.c
security/tomoyo/network.c
Before:
All these functions either return a negative error indicator,
or store length of sockaddr into "int *socklen" parameter
and return zero on success.
"int *socklen" parameter is awkward. For example, if caller does not
care, it still needs to provide on-stack storage for the value
it does not need.
None of the many FOO_getname() functions of various protocols
ever used old value of *socklen. They always just overwrite it.
This change drops this parameter, and makes all these functions, on success,
return length of sockaddr. It's always >= 0 and can be differentiated
from an error.
Tests in callers are changed from "if (err)" to "if (err < 0)", where needed.
rpc_sockname() lost "int buflen" parameter, since its only use was
to be passed to kernel_getsockname() as &buflen and subsequently
not used in any way.
Userspace API is not changed.
text data bss dec hex filename
30108430 2633624 873672 33615726 200ef6e vmlinux.before.o
30108109 2633612 873672 33615393 200ee21 vmlinux.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: David S. Miller <davem@davemloft.net>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-decnet-user@lists.sourceforge.net
CC: linux-wireless@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: linux-sctp@vger.kernel.org
CC: linux-nfs@vger.kernel.org
CC: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Clean up some function signatures in rxe for clarity
- Tidy the RDMA netlink header to remove unimplemented constants
- bnxt_re driver fixes, one is a regression this window.
- Minor hns driver fixes
- Various fixes from Dan Carpenter and his tool
- Fix IRQ cleanup race in HFI1
- HF1 performance optimizations and a fix to report counters in the right units
- Fix for an IPoIB startup sequence race with the external manager
- Oops fix for the new kabi path
- Endian cleanups for hns
- Fix for mlx5 related to the new automatic affinity support
-----BEGIN PGP SIGNATURE-----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=xwZz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull more rdma updates from Doug Ledford:
"Items of note:
- two patches fix a regression in the 4.15 kernel. The 4.14 kernel
worked fine with NVMe over Fabrics and mlx5 adapters. That broke in
4.15. The fix is here.
- one of the patches (the endian notation patch from Lijun) looks
like a lot of lines of change, but it's mostly mechanical in
nature. It amounts to the biggest chunk of change in it (it's about
2/3rds of the overall pull request).
Summary:
- Clean up some function signatures in rxe for clarity
- Tidy the RDMA netlink header to remove unimplemented constants
- bnxt_re driver fixes, one is a regression this window.
- Minor hns driver fixes
- Various fixes from Dan Carpenter and his tool
- Fix IRQ cleanup race in HFI1
- HF1 performance optimizations and a fix to report counters in the right units
- Fix for an IPoIB startup sequence race with the external manager
- Oops fix for the new kabi path
- Endian cleanups for hns
- Fix for mlx5 related to the new automatic affinity support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (38 commits)
net/mlx5: increase async EQ to avoid EQ overrun
mlx5: fix mlx5_get_vector_affinity to start from completion vector 0
RDMA/hns: Fix the endian problem for hns
IB/uverbs: Use the standard kConfig format for experimental
IB: Update references to libibverbs
IB/hfi1: Add 16B rcvhdr trace support
IB/hfi1: Convert kzalloc_node and kcalloc to use kcalloc_node
IB/core: Avoid a potential OOPs for an unused optional parameter
IB/core: Map iWarp AH type to undefined in rdma_ah_find_type
IB/ipoib: Fix for potential no-carrier state
IB/hfi1: Show fault stats in both TX and RX directions
IB/hfi1: Remove blind constants from 16B update
IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times
IB/hfi1: Do not override given pcie_pset value
IB/hfi1: Optimize process_receive_ib()
IB/hfi1: Remove unnecessary fecn and becn fields
IB/hfi1: Look up ibport using a pointer in receive path
IB/hfi1: Optimize packet type comparison using 9B and bypass code paths
IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet
IB/hfi1: Remove dependence on qp->s_hdrwords
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttq9
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
The hip06 and hip08 run on a little endian ARM, it needs to
revise the annotations to indicate that the HW uses little
endian data in the various DMA buffers, and flow the necessary
swaps throughout.
The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu
swaps are no-op for this, which makes the only substantive
change the handling of imm_data which is now mandatory swapped.
This also keep match with the userspace hns driver and resolve
the warning by sparse.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add trace_hfi1_rcvhdr support for bypass packets.
While here, remove the etype argument as it is available
in struct hfi1_packet.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kzalloc_node API doesn't check for overflows in size multiplication.
While kcalloc API check for overflows in size multiplication
but these implementations are not NUMA-aware.
This conversion allowed for correcting an allocation used in the hot
path to be on the local NUMA and ensure us overflow free multiplication
for the size of a memory allocation.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The routine which shows the fault stats checks the counters
to determine whether to show any stats based on the number of
transmitted pkts/bytes for a particular opcode.
Unfortunately, it only checked the receive counters. As a result,
if any packet faults have happened for packets egressing the HFI,
those stats would not be shown.
In order to fix this, the routine is amended to also check the
TX counters. With this change the pkt/byte counts are the sum of
both TX and RX counts for the opcode.
Fixes: 1b311f8931 ("IB/hfi1: Add tx_opcode_stats like the opcode_stats")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These values were introduced as part of the 16B code to
account for the varying size of the LRH between the differing
packet formats.
Replace the blind constants with defines based on FIELD_SIZEOF()
calls.
Fixes: 5b6cabb0db ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HFI's counters SendWaitCnt and SendWaitVlCnt are in units
of TXE cycle time (at 805MHz). OPA counters PortXmitWait and
PortVLXmtWait are in units of flit times.
Convert the counter values to flit units using following
conversion formula:
PortXmitWait =
SendWaitCnt * 2 * (4 /link_width) * (25 Gbps /link_speed)
PortVLXmitWait =
SendWaitVLCnt * 2 * (4 /link_width) * (25 Gbps /link_speed)
At link up or downgrade events, the link width can change. To ensure
accurate counter calculations, sample the counters after the events,
during counter requests, and then aggregate the OPA counters.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During PCIe Gen 3 transistion, pcie_pset is read and might be overridden
to a default value(i.e. 255) in do_pcie_gen3_transition() routine.
If the pcie_pset value is overridden then this new value will be used
during initialization of next adapter on a different card.
Introducing a new local variable to avoid modification of pcie_pset
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Patel Jay P <jay.p.patel@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The arguments for trace_hfi1_rcvhdr() get computed every
time in the hot path regardless of the whether the trace
is on or off. This is seen to be costly with a profile.
The handling of fault inject isolates the verbs device for
all packets regardless of the presence of a RHF_DC_ERR error.
Fix the first by computing trace_hfi1_rcvhdr() arguments within
the trace itself, so that when the trace is off, the argument
data isn't computed. Fix the second by moving the error check to
handle_eflags() when an RHF error occurs and by testing for
RHF_DC_ERR before executing the reset of handle_eflags().
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
packet->fecn and packet->becn are calculated in the hot path
and are never used. Remove these fields as they show to be
costly in a profile. Also, remove initialization for
becn and fecn in process_ecn() as they're unconditionally
assigned in the function and ensure fecn and becn variables
use a boolean type.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the receive path, hfi1_ibport is looked up by indexing into an
array. A profile shows this to be expensive. The receive context
data has a pointer to the ibport data, use that pointer instead.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The packet type comparison used to find out if a packet is a bypass
packet in the hot path is an expensive operation as seen in a profile.
Determine packet's pkey and migration bit through the bypass and 9B
code paths instead.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In hfi1_rc_rcv(), BTH is computed for all packets received.
However, it's only used for packets received with opcodes
RDMA_WRITE_LAST and SEND_LAST, and it is a costly operation.
Compute BTH only in the RDMA_WRITE_LAST/SEND_LAST code path
and let the compiler handle endianness conversion for bitwise
operations.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The s_hdrwords variable was used to indicate whether a
packet was already built on a previous iteration of the
send engine. This variable assumed the protection of the
QP's RVT_S_BUSY flag, which was required since the the
QP's s_lock was dropped just prior to the packet being
queued on the one of the egress mechanisms.
Support for multiple send engine instantiations require
that the field not be used due to concurency issues.
The ps.txreq signals the "already built" without the
potential concurency issues.
Fix by getting rid of all s_hdrword usage. A wrapper
is added to test for the already built case that used to
use s_hdrwords.
What used to be stored in s_hdrwords is now in the txreq.
The PBC is not counted, but is added in the pio/sdma code
paths prior to posting the packet.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The dd refcount is speculatively incremented prior to allocating
the fd memory with kzalloc(). If that kzalloc() failed the dd
refcount leaks.
Increment refcount on kzalloc success.
Fixes: e11ffbd575 ("IB/hfi1: Do not free hfi1 cdev parent structure early")
Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pci_request_irq() interfaces always adds the IRQF_SHARED bit to
all IRQ requests.
When the kernel is built with CONFIG_DEBUG_SHIRQ config flag, if the
IRQF_SHARED bit is set, a call to the IRQ handler is made from the
__free_irq() function. This is testing a race condition between the
IRQ cleanup and an IRQ racing the cleanup. The HFI driver should be
able to handle this race, but does not.
This race can cause traces that start with this footprint:
BUG: unable to handle kernel NULL pointer dereference at (null)
Call Trace:
<hfi1 irq handler>
...
__free_irq+0x1b3/0x2d0
free_irq+0x35/0x70
pci_free_irq+0x1c/0x30
clean_up_interrupts+0x53/0xf0 [hfi1]
hfi1_start_cleanup+0x122/0x190 [hfi1]
postinit_cleanup+0x1d/0x280 [hfi1]
remove_one+0x233/0x250 [hfi1]
pci_device_remove+0x39/0xc0
Export IRQ cleanup function so it can be called from other modules.
Using the exported cleanup function:
Re-order the driver cleanup code to clean up IRQ resources before
other resources, eliminating the race.
Re-order error path for init so that the race does not occur.
Reduce severity on spurious error message for SDMA IRQs to info.
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Reviewed-by: Patel Jay P <jay.p.patel@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The mtt_table is cleaned up during the err_unmap_cqe label, it is a
mistake to duplicate the cleanup during the later unwind labels.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly fix some style warings matched with the new checkpatch
requirement. The warning as follows:
WARNING: function definition argument 'struct hns_roce_cq *' should also have
an identifier name
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The double not-operator is unncessary when used in a boolean context. This
patch removes them.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Omit extra messages for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge updates from Andrew Morton:
- misc fixes
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm: remove PG_highmem description
tools, vm: new option to specify kpageflags file
mm/swap.c: make functions and their kernel-doc agree
mm, memory_hotplug: fix memmap initialization
mm: correct comments regarding do_fault_around()
mm: numa: do not trap faults on shared data section pages.
hugetlb, mbind: fall back to default policy if vma is NULL
hugetlb, mempolicy: fix the mbind hugetlb migration
mm, hugetlb: further simplify hugetlb allocation API
mm, hugetlb: get rid of surplus page accounting tricks
mm, hugetlb: do not rely on overcommit limit during migration
mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
mm, hugetlb: unify core page allocation accounting and initialization
mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes
mm/memcontrol.c: make local symbol static
mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer
mm/compaction.c: fix comment for try_to_compact_pages()
mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it
zsmalloc: use U suffix for negative literals being shifted
...
Commit 4d4bbd8526 ("mm, oom_reaper: skip mm structs with mmu
notifiers") prevented the oom reaper from unmapping private anonymous
memory with the oom reaper when the oom victim mm had mmu notifiers
registered.
The rationale is that doing mmu_notifier_invalidate_range_{start,end}()
around the unmap_page_range(), which is needed, can block and the oom
killer will stall forever waiting for the victim to exit, which may not
be possible without reaping.
That concern is real, but only true for mmu notifiers that have
blockable invalidate_range_{start,end}() callbacks. This patch adds a
"flags" field to mmu notifier ops that can set a bit to indicate that
these callbacks do not block.
The implementation is steered toward an expensive slowpath, such as
after the oom reaper has grabbed mm->mmap_sem of a still alive oom
victim.
[rientjes@google.com: mmu_notifier_invalidate_range_end() can also call the invalidate_range() must not block, fix comment]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801091339570.240101@chino.kir.corp.google.com
[akpm@linux-foundation.org: make mm_has_blockable_invalidate_notifiers() return bool, use rwsem_is_locked()]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141329500.74052@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
We should return -ENOMEM if the allocation fails. (The current code
returns succees).
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If there is ever any error while creating srq->umem, we return that
error, we don't store it in srq->umem, so any check of srq->umem for
IS_ERR is pointless. Further, checking udata is unnecessary as
srq->umem is always either NULL or valid, without respect to udata.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- Several major feature adds to bnxt_re driver: SRIOV VF RoCE support,
HugePages support, extended hardware stats support, and SRQ support
- A notable number of fixes to the i40iw driver from debugging scale up
testing
- More work to enable the new hip08 chip in the hns driver
- Misc small ULP fixups to srp/srpt//ipoib
- Preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- Add RDMA-CM support to srp initiator, srp target is still a WIP
- Fixes for a couple of places where ipoib could spam the dmesg log
- Fix encode/decode of FDR/EDR data rates in the core
- Many patches from Parav with ongoing work to clean up inconsistencies
and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain', 'wallclock
timestamps' and 'DV Direct Connected transport'. Support for the firmware
dual port rocee capability
- Core support for more than 32 rdma devices in the char dev allocation
- kernel doc updates from Randy Dunlap
- New netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- One minor change to the kobject code acked by GKH
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCgAGBQJacfljAAoJEDht9xV+IJsaUnwP+QFJvfIDEfRlfU2rTmcfymPs
Rz9bW1KLgETcJx/XOE2ba2DOaqdFr56TLflsDfEfOSIL8AtzBQqH3vTqEj49bBP7
4JZAkzWllUS/qoYD2XmvOM0IrIfFXzZtLM/lzLi+5dwK26x3GAB9hHXpKzUrJ1vj
I1Naq14qOFXoNBndEtZJqtIKOhR/Pnd6YtxAiNCmViZGdqm3DIU3D4VJhU5B7pO9
j6ovJs16wfJl/gV1iiz9xO49ViVFpwzSIzYE/Q2ZCegcrsF3EEVN2J4vZHkKgDuN
0/Ar/WOvkPzKBFR8hJ7M4kwp0Fy/69/U49s7kpGNxdhML9sU3+Qfse6JYGj0M9L8
01gTM0SShyAZMNAvjVFbIKLQPg806OAit4cooMwlObbwJ6b7B8K0uN17/uVIkIqp
gXqertyl1BLhUtTOby/8Fox/f/oEvaZksKiwcTKSb7D1Y5jGZZUPRknJ5SwAFWQB
RiTPJ6mY7BUsM9zuYQtRE8x2mpgIezYXFcrAz7iT76WuoZQgo1QLIyYRM1+MlhnC
wNrp5BtqoVfW2Ps0CbSdxJ9vDtDf3cwLg0RzcCB8+NJJccsRD9IVMDev/TDY5k9U
M9LxxtW3WuulRWgliU0Q9VaswUQoIao16vBMVL7GwUm+ClLvbRVoPe8jxgtfk+W3
GAANAI7Kv/vUoV/6CFfP
=sMXV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"Overall this cycle did not have any major excitement, and did not
require any shared branch with netdev.
Lots of driver updates, particularly of the scale-up and performance
variety. The largest body of core work was Parav's patches fixing and
restructing some of the core code to make way for future RDMA
containerization.
Summary:
- misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- several major feature adds to bnxt_re driver: SRIOV VF RoCE
support, HugePages support, extended hardware stats support, and
SRQ support
- a notable number of fixes to the i40iw driver from debugging scale
up testing
- more work to enable the new hip08 chip in the hns driver
- misc small ULP fixups to srp/srpt//ipoib
- preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- add RDMA-CM support to srp initiator, srp target is still a WIP
- fixes for a couple of places where ipoib could spam the dmesg log
- fix encode/decode of FDR/EDR data rates in the core
- many patches from Parav with ongoing work to clean up
inconsistencies and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain',
'wallclock timestamps' and 'DV Direct Connected transport'. Support
for the firmware dual port rocee capability
- core support for more than 32 rdma devices in the char dev
allocation
- kernel doc updates from Randy Dunlap
- new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- one minor change to the kobject code acked by Greg KH"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
RDMA/nldev: Provide detailed QP information
RDMA/nldev: Provide global resource utilization
RDMA/core: Add resource tracking for create and destroy PDs
RDMA/core: Add resource tracking for create and destroy CQs
RDMA/core: Add resource tracking for create and destroy QPs
RDMA/restrack: Add general infrastructure to track RDMA resources
RDMA/core: Save kernel caller name when creating PD and CQ objects
RDMA/core: Use the MODNAME instead of the function name for pd callers
RDMA: Move enum ib_cq_creation_flags to uapi headers
IB/rxe: Change RDMA_RXE kconfig to use select
IB/qib: remove qib_keys.c
IB/mthca: remove mthca_user.h
RDMA/cm: Fix access to uninitialized variable
RDMA/cma: Use existing netif_is_bond_master function
IB/core: Avoid SGID attributes query while converting GID from OPA to IB
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
IB/umad: Fix use of unprotected device pointer
IB/iser: Combine substrings for three messages
IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
...
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
=sOml
-----END PGP SIGNATURE-----
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flags field the enum is used with comes directly from the uapi
so it belongs in the uapi headers for clarity and so userspace can
use it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
qib_keys.c was left uncompilable in commit 7c2e11fe2d ("IB/qib: Remove qp and mr functionality from qib")
Since nothing need it, remove it from tree.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mthca_user.h is unused since commit 486f60954c ("IB/mthca: Move user vendor structures")
Remove it from tree.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.
This patch changes behavior to always free memory and always return
success to the user.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
get_user_pages() must be called with mmap_sem held, currently
it is not. In fact it is called under the user db_table->mutex.
To fix this we can convert gup to use the fast alternative,
and safely avoid taking mmap_sem, if possible. Furthermore
this is safe wrt to the mutex as other callers that take the
lock (unmap and alloc_db) are not called under mmap_sem
(hence possible deadlock).
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are races where can still get flush on CQEs before the QP enters
error state. This is not an error and should be treated as
debug information.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The kmalloc() failure to allocate memory generates enough information
and doesn't need to be accompanied by another driver print.
Fixes: d69a24e036 ("IB/mlx5: Move IB event processing onto a workqueue")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch maps the new page to user space applications to
allow converting a user space completion timestamp to system wall
time at the lowest possible latency cost.
By using a versioning scheme we allow compatibility between current
and future userspace libraries.
The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the
abi header file mlx5-abi.h.
Reviewed-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shared receive queue (SRQ) is defined as a pool of
receive buffers shared among multiple QPs which belong
to same protection domain in a given process context.
Use of SRQ reduces the memory foot print of IB applications.
Broadcom adapters support SRQ, adding code-changes to enable
shared receive queue.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Broadcom's adapter supports more granular statistics
to allow better understanding about the state of the
chip when data traffic is flowing.
Exposing the detailed stats to the consumer through
the standard hook available in the kverbs interface.
In order to retrieve all the information, driver
implements a firmware command.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K
Underlying provider driver needs to adjust its PBL boundaries
according to the incoming page boundaries in the PA list.
Adding a capability to register MRs having pages-sizes other
than 4K (Hugepages).
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.
Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The iWARP Exception Queue (IEQ) resources are not freed when a QP is
destroyed. Fix this by freeing IEQ resources when freeing QP resources.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove setting of rem_addr.len before calling iw_rdma_write,
iw_inline_rdma_write and rdma_read. rem_addr.len is not used in those
functions.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, if the number of processed Asynchronous Event Queue (AEQ)
entries exceeds 255, they are not returned to HW for re-use. During
scale-up, the unreturned AEQ entries can grow to the max AEQ size and
cause the HW to report an AEQ overflow.
Remove the check which limits the number of processed AEQ entries returned
to HW.
Fixes: 86dbcd0f12 ("RDMA/i40iw: add file to handle cqp calls")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the application invalidates the MR before the FMR WR, HW parses the
consumer key portion of the stag and returns an invalid stag key
Asynchronous Event (AE) that tears down the QP.
Fix this by zeroing-out the consumer key portion of the allocated stag
returned to application for FMR.
Fixes: ee855d3b93f3 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove redundant estimate SD function call. sd_needed should already be
updated at the end of the do while resource reduction loop.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch assign a guid(Global Unique identifer) value to the hip08
device.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the port is a RoCEv2 port, the remote port address and QP information
which returned for UD will be modified.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Because pkey is fixed for hip08 RoCE, it needs to assign zero for
pkey_index of wc. otherwise, it will happen an error when establishing
connection by communication management mechanism.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly configure the fields of sq wqe of ud type when posting
wr of gsi qp type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to Assign the values for some fields in qp context when qp type
is gsi qp type in hip08.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The gsi qp and rc qp use the same qp context structure and the created
flow, only differentiate them by qpn and qp type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When modifying qp from init to init, it need to assign the cqn of send cq
for tx cqn field of qp context. Otherwise, it will cause a mistake when
the send and recv cq sizes are different.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Oops fix in hfi1 driver
- Use-after-free issue in iser-target
- Use of user supplied array index without proper checking
-----BEGIN PGP SIGNATURE-----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=MHNK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"We had a few more items creep up over the last week. Given we are in
-rc8, these are obviously limited to bugs that have a big downside and
for which we are certain of the fix.
The first is a straight up oops bug that all you have to do is read
the code to see it's a guaranteed 100% oops bug.
The second is a use-after-free issue. We get away lucky if the queue
we are shutting down is empty, but if it isn't, we can end up oopsing.
We really need to drain the queue before destroying it.
The final one is an issue with bad user input causing us to access our
port array out of bounds. While fixing the array out of bounds issue,
it was noticed that the original code did the same thing twice (the
call to rdma_ah_set_port_num()), so its removal is not balanced by a
readd elsewhere, it was already where it needed to be in addition to
where it didn't need to be.
Summary:
- Oops fix in hfi1 driver
- use-after-free issue in iser-target
- use of user supplied array index without proper checking"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix out-of-bound access while querying AH
IB/hfi1: Prevent a NULL dereference
iser-target: Fix possible use-after-free in connection establishment error
Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.
As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.
When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:
mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0
Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).
Cc: <stable@vger.kernel.org>
Fixes: 4196670be7 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The double swap matches what user space rdma-core does to imm_data.
wc->imm_data is not used in the kernel so this change has no practical
impact.
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This matches the changes made recently to the userspace hns
driver when it was made sparse clean.
See rdma-core commit bffd380cfe56 ("libhns: Make the provider sparse
clean")
wc->imm_data is not used in the kernel so this change has no practical
impact.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_ah_find_type() accesses the port array based on an index
controlled by userspace. The existing bounds check is after the first use
of the index, so userspace can generate an out of bounds access, as shown
by the KASN report below.
==================================================================
BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0
Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409
CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
print_address_description+0xa2/0x350
kasan_report+0x3a5/0x400
to_rdma_ah_attr+0xa8/0x3b0
mlx5_ib_query_qp+0xd35/0x1330
ib_query_qp+0x8a/0xb0
ib_uverbs_query_qp+0x237/0x7f0
ib_uverbs_write+0x617/0xd80
__vfs_write+0xf7/0x500
vfs_write+0x149/0x310
SyS_write+0xca/0x190
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x7fe9c7a275a0
RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0
RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003
RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018
R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000
R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560
Allocated by task 1:
__kmalloc+0x3f9/0x430
alloc_mad_private+0x25/0x50
ib_mad_post_receive_mads+0x204/0xa60
ib_mad_init_device+0xa59/0x1020
ib_register_device+0x83a/0xbc0
mlx5_ib_add+0x50e/0x5c0
mlx5_add_device+0x142/0x410
mlx5_register_interface+0x18f/0x210
mlx5_ib_init+0x56/0x63
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff880019ae2000
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 104 bytes to the right of
512-byte region [ffff880019ae2000, ffff880019ae2200)
The buggy address belongs to the page:
page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
>ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Cc: <stable@vger.kernel.org>
Fixes: 44c58487d5 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change mlx5_get_uars_page to return ERR_PTR in case of
allocation failure. Change all callers accordingly to
check the IS_ERR(ptr) instead of NULL.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.
Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)
Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.
Adapt mlx5_ib and mlx5e to support the new cap bits.
Fixes: 2c43c5a036 ("net/mlx5e: Enable local loopback in loopback selftest")
Fixes: c85023e153 ("IB/mlx5: Add raw ethernet local loopback support")
Fixes: bded747bb4 ("net/mlx5: Add raw ethernet local loopback firmware command")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The initial assignment to mdev is redundant as mdev is re-assigned
later and the first assigned value is never read. Remove this
redundant assignment.
Cleans up clang warning:
drivers/infiniband/hw/mlx5/main.c:359:24: warning: Value stored
to 'mdev' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the original code, we set "fd->uctxt" to NULL and then dereference it
which will cause an Oops.
Fixes: f2a3bc00a0 ("IB/hfi1: Protect context array set/clear with spinlock")
Cc: <stable@vger.kernel.org> # 4.14.x
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging in 12 patch series from Bart that required changes in the
current for-rc branch in order to apply cleanly.
Signed-off-by: Doug Ledford <dledford@redhat.com>
When operating in dual port RoCE mode FW doesn't support steering for
raw QPs on the slave port. They still work on the master port, but
the user has no way of knowing which port is the master. The
capability is reported per device, not per port.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Route performance query MADs to the correct mlx5_core_dev when using
dual port RoCE mode.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in dual port mode setting a RoCE GID for any port flows through the
master ports mlx5_core_dev. Provide an interface to set the port when
sending this command.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update the counter interface for multiple ports. Some counter sets
always comes from the primary device.
Port specific counters should be accessed per mlx5_core_dev not always
through the IB master mdev.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When there are multiple ports for single IB(RoCE) device, support
debugfs entries to be available for each port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Port operations must be routed to their native mlx5_core_dev. A
multiport RoCE device registers itself as having 2 ports even before a
2nd port is affiliated. If an unaffilated port is queried use capability
information from the master port, these values are the same.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Because mlx5_ib_event can be called from atomic context move event
handling onto a workqueue. A mutex lock is required to get the IB device
for slave ports, so move event processing onto a work queue. When an IB
event is received, check if the mlx5_core_dev is a slave port, if so
attempt to get the IB device it's affiliated with. If found process the
event for that device, otherwise return.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.
If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.
Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.
The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.
In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.
The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.
A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.
Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().
Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reporting that a device doesn't support RoCE seems like a valuable piece
of information to have when trying to determine why a driver is not binding
to a device. Better to report this at info log level instead of requiring
a user to enable all debug messages in the driver.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_wait_pe_ready is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep,
to reduce busy wait.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The get_unit_name() function crafts a string based on the device name
and the device unit number. It then stores this in a static variable.
This has concurrency issues as can be seen with this log:
hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203
hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203
The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the
message, but the device string hfi1_1 is incorrect (it should be
hfi1_0 for the second log message).
Remove get_unit_name() function.
Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name
string.
Clean up any hfi1_early_xx calls that can now use the new path.
QIB has the same (qib_get_unit_name()) issue. Updating as necessary.
Remove qib_get_unit_name() function.
Update log message that has redundant device name.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an 8051 command times out, the entire DC block is restarted. During
the restart, the host interface version bit is set, which calls
do_8051_command() recursively. The host version bit needs to be set
before the link moves into polling, so the host version bit can be set
in set_local_link_attributes() instead. Thus, the 8051 command functions
can be simplied as a non-locking version (dd->dc8051_lock) of those
functions are no longer needed.
Fixes: 9be6a5d788 ("IB/hfi1: Prevent LNI out of sync by resetting host interface version")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdmavt has a down call to client drivers to retrieve a crafted card
name.
This name should be the IB defined name.
Rather than craft the name each time it is needed, simply retrieve
the IB allocated name from the IB device.
Update the function name to reflect its application.
Clean up driver code to match this change.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently the HFI and QIB drivers allow the IB core to assign a unit
number to the driver name string.
If multiple devices exist in a system, there is a possibility that the
device unit number and the IB core number will be mismatched.
Fix by using the driver defined unit number to generate the device
name.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Unconditional locks/list and ODP srcu initialization should be done in
the INIT stage. Remove those from the CAPS stage and move them to the
proper stage.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The loopback stage only initializes a lock, move it to be in
the CAPS initialization phase and get rid loopback step completely.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for hardware counters, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for ODP, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a stage just for RoCE/ETH, move all relevant
initialization logic into one place.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Today we have single function which is used when we add an IB interface,
break this function into multiple functions.
Create stages and a generic mechanism to execute each stage.
This is in preparation for RDMA/IB representors which might not need
all stages or will do things differently in some of the stages.
This patch doesn't change any functionality.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When debugging issues with RC QPs, it is useful to know if a QP
has an associated RQ or SRQ, the size of the RQ, and any RNR timeout
values.
Add the necessary information to the QP stats output.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to create eight reserve QPs for resolving
a bug of hip06. When deregistering mr, it will issue
a rdma write for every reserve QPs.
When modify qp from init to rtr, it needs to set
the value of dest_qp_num. Otherwise, it will lead
an error of freeing mr.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP can accept send work requests only when the QP is
in the states that allow them to be submitted.
This patch updates the QP state judgement based on the
specification.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the length of sge is zero, the driver need to filter it
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch refactors the code of setting access flags
for RDMA operation as well as adds the scene when
attr->max_dest_rd_atomic is zero.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the usage with sr_max filed and rr_max of qp
context when modify qp. Its modifications include:
1. Adjust location of filling sr_max filed of qpc
2. Only assign the number of responder resource if
IB_QP_MAX_DEST_RD_ATOMIC bit is set
3. Only assign the number of outstanding resource if
IB_QP_MAX_QP_RD_ATOMIC
4. Fix the assgin algorithms for the field of sr_max
and rr_max of qp context
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly implement rq inline data feature for hip08
RoCE in kernel mode.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull RCU updates from Paul E. McKenney:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and
in kernel/torture.c). Also a couple of fixes to avoid sending
IPIs to offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends()
and read_barrier_depends().
- Miscellaneous fixes.
- Torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Advance the qed* drivers to use firmware 8.33.1.0:
Modify core driver (qed) to utilize the new FW and initialize the device
with it. This is the lion's share of the patch, and includes changes to FW
interface files, device initialization flows, FW interaction flows, and
debug collection flows.
Modify Ethernet driver (qede) to make use of new FW in fastpath.
Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath.
Modify FCoE driver (qedf) to make use of new FW in fastpath.
Modify iSCSI driver (qedi) to make use of new FW in fastpath.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames defines and structures in the FW HSI files to allow a
distinction between different types of HW.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch refactors and reorders the FW API files in preparation of
upgrading the code to support new FW.
- Make use of the BIT macro in appropriate places.
- Whitespace changes to align values and code blocks.
- Comments are updated (spelling mistakes, removed if not clear).
- Group together code blocks which are related or deal with similar
matters.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Done using Coccinelle.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
0-day tested with no failures.
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Done using Coccinelle.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
0-day tested with no failures.
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Done using Coccinelle.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
0-day tested with no failures.
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Done using Coccinelle.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
0-day tested with no failures.
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use dma_zalloc_coherent for allocating zeroed
memory and remove unnecessary memset function.
Done using Coccinelle.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
0-day tested with no failures.
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ibmr.device is being set only after ib_alloc_mr() is successfully complete.
Therefore, in case imlx4_mr_enable() returns with error, the error flow
unwinder calls to mlx4_free_priv_pages(), which uses ibmr.device.
Such usage causes to NULL dereference oops and to fix it, the IB device
should be set in the mr struct earlier stage (e.g. prior to calling
mlx4_free_priv_pages()).
Fixes: 1b2cd0fc67 ("IB/mlx4: Support the new memory registration API")
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These prints not neccesarily mean error/warning, so changing them to
debug.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds more detailed comments when we call the
memory barrier function, such as rmb, wmb and mb. Three
mb() callers are deleted since they are unnecessary.
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch enables QP creation with a given BF index, this allows the
user space driver to share same BF between few QPs or alternatively have
a dedicated BF per QP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch exposes the option to dynamic allocates a UAR, this
functionality will be used in downstream patch in this series as
part of QP creation.
Specifically, the user space driver asks for a UAR allocation in a given
page index, upon success this UAR and its bfregs can be used as part of
QP creation by the user space driver.
To enable allocating more than 256 UARs the page index is encoded in an
extra one byte just after the command byte.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch extends the alloc context flow to be prepared for working
with dynamic UAR allocations.
Currently upon alloc context there is some fix size of UARs that are
allocated (named 'static allocation') and there is no option to user
application to ask for more or control which UAR will be used by which
QP.
In this patch the driver prepares its data structures to manage both the
static and the dynamic allocations and let the user driver knows about
the max value of dynamic blue-flame registers that are allowed.
Downstream patches from this series will enable the dynamic allocation
and the association as part of QP creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add missing inner RSS support capability as part of
the RSS supported fields.
In addition change MLX5_RX_HASH_INNER to 1UL << 31 in
order to define it as unsigned.
Fixes: 309fa3470f ("IB/mlx5: Add support for RSS on the inner packet")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support RSS hash for inner headers according to a new flag,
MLX4_IB_RX_HASH_INNER provided by the vendor channel.
In case the flag is set, RSS hash will be done on the inner headers of
VXLAN packets (which are encapsulated).
Non-encapsulated packets will be hashed according to the outer headers.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
refcount_t is the preferred type for refcounts. Change the
QP and CQ refcnt fields to use refcount_t.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert the sizeof(void *) in two kcalloc calls to be more
specific for the arrays that are being allocated.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Be more consistent in setting and checking is_kernel
flag for QPs and CQs.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accelerated flag only utilizes two values: 0 and 1.
Modify accelerated flag in struct i40iw_cm_node to bool.
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ibmr.device is being set only after ib_alloc_mr() is
(successfully) complete. Therefore, in case mlx5_core_create_mkey()
return with error, the error flow calls mlx5_free_priv_descs()
which uses ibmr.device (which doesn't exist yet), causing
a NULL dereference oops.
To fix this, the IB device should be set in the mr struct earlier
stage (e.g. prior to calling mlx5_core_create_mkey()).
Fixes: 8a187ee52b ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User-space applications can do mmap and munmap directly at
any time.
Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.
Cc: <stable@vger.kernel.org> # v4.7
Fixes: 7c2344c3bb ("IB/mlx5: Implements disassociate_ucontext API")
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the slid arg to ingress_pkey_table_fail() to a full
32Bits and do not convert to 16Bits in caller. This is so we
can keep everything 32bit in the kernel and only change to
16bit at the uapi boundary.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accepting QP ORD value should be adjusted not to
exceed the peer QP IRD value (RFC 6581). This is
skipped for loopback. After the ORD is validated
by i40iw_record_ird_ord(), adjust the ORD value of
the loopback accepting QP to prevent overrunning the
IRD space of the peer QP. Also move the ORD accounting
for 0-byte RDMA read to i40iw_record_ird_ord().
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Casting to u16 before validating IRD/ORD connection
parameters could cause recording wrong IRD/ORD values
in the cm_node. Validate the IRD/ORD parameters as
they are passed by the application before recording
them.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The LLP_DOUBT_REACHABILITY Asynchronous Event (AE) is an early
warning of a connection issue. It is followed by LLP_TOO_MANY_RETRIES
AE, if the retransmit threshold is reached and recovery is not possible
for the connection.
Currently we terminate the connection on receiving the
LLP_DOUBT_REACHABILITY AE. Ignore this AE and
terminate the connection only on LLP_TOO_MANY_RETRIES AE.
This improves the user experience on cable disconnect/reconnect
scenario while running iWARP traffic. On cable disconnect,
the QP traffic is paused and the user has a larger and more
reasonable timeout within which if the cable is reconnected,
traffic can continue.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.
Fixes: 786c6adb3a ("i40iw: add puda code")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On IP address change event, all connected QPs are torn down
irrespective of whether IP address is involved in a connection.
Only teardown connections those source or destination address
matches the netdev interface IP address being changed, and if
they are on the same VLAN as the netdev.
Fixes: e5e74b61b1 ("i40iw: Add IP addr handling on netdev events")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Register a netdevice notifier for netdev UP/DOWN
notification events and report the appropriate ib event.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Consolidate all power of 2 round calculations to
use kernel utility function roundup_pow_of_two().
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Increase I40IW_MAX_IRD_SIZE to 64 which is the device limit.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The accelerated flag only utilizes two values: 0 and 1.
Modify accelerated flag in struct nes_cm_node to bool.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During driver init, various registers are saved to allow restoration
after an FLR or gen3 bump. Some of these registers are not available
in some circumstances (i.e. Virtual machines).
This bug makes the driver unusable when the PCI device is passed into
a VM, it fails during probe.
Delete unnecessary register read/write, and only access register if
the capability exists.
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: a618b7e40a ("IB/hfi1: Move saving PCI values to a separate function")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds eq support for hip08. The eq table can
be multi-hop addressed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Considering the compatibility of supporting hip08's eq
process and possible changes of data structure, this patch
refactors the eq code structure of hip06.
We move all the eq process code for hip06 from hns_roce_eq.c
into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With
these changes, it will be convenient to add the eq support
for later hardware version.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Congestion counters are counted and queried per physical function.
When working in LAG mode, CNP packets can be sent or received on both
of the functions, thus congestion counters should be aggregated from
the two physical functions.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The use of wait queues in vmw_pvrdma for handling concurrent
access to a resource leaves a race condition which can cause a use
after free bug.
Fix this by using the pattern from other drivers, complete() protected by
dec_and_test to ensure complete() is called only once.
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
refcount_dec generates a warning when the operation
causes the refcount to hit zero. Avoid this by using
refcount_dec_and_test.
Fixes: 8b10ba783c ("RDMA/vmw_pvrdma: Add shared receive queue support")
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If a wr chain was posted and needed to be flushed, only the first
wr in the chain was completed with FLUSHED status. The rest were
never completed. This caused isert to hang on shutdown due to the
missing completions which left iscsi IO commands referenced, stalling
the shutdown.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flush/drain logic was not retaining the original wr opcode in
its completion. This can cause problems if the application uses
the completion opcode to make decisions.
Use bit 10 of the CQE header word to indicate the CQE is a special
drain completion, and save the original WR opcode in the cqe header
opcode field.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the RECV CQE is in error, ignore the MSN check. This was causing
recvs that were flushed into the sw cq to be completed with the wrong
status (BAD_MSN instead of FLUSHED).
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Debugfs file reset_stats is created with S_IRUSR permissions,
but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS,
whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS.
The patch fixes misstype with permissions.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Smatch complains about this code:
drivers/infiniband/hw/mlx4/qp.c:1827 _mlx4_set_path()
error: buffer overflow 'dev->dev->caps.gid_table_len' 3 <= 255
The mlx4_ib_gid_index_to_real_index() does check that "port" is within
bounds, but we don't check the return value for errors. It seems simple
enough to add a check for that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The story is that Smatch marks skb->data as untrusted so it generates
a warning message here:
drivers/infiniband/hw/cxgb4/cm.c:4100 process_work()
error: buffer overflow 'work_handlers' 241 <= 255
In other places which handle this such as t4_uld_rx_handler() there is
some checking to make sure that the function pointer is not NULL. I
have added bounds checking and a check for NULL here as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pointer reg_workq is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
drivers/infiniband/hw/cxgb4/device.c:69:25: warning: symbol 'reg_workq'
was not declared. Should it be static?
Fixes: 1c8f1da5d8 ("iw_cxgb4: Fix possible circular dependency locking warning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The debugfs file prints the difference between host timestamps as a
seconds/nanoseconds tuple, along with a 64-bit nanoseconds hardware
timestamp. The host time is read using getnstimeofday() which is
deprecated because of the y2038 overflow, and it suffers from time jumps
during settimeofday() and leap seconds.
Converting to ktime_get_ts64() would solve those two, but I'm going
a little further here by changing to ktime_get() and printing 64-bit
nanoseconds on both host and hw timestamps. This simplifies the code
further and makes the output easier to understand.
The format of the debugfs file obviously changes here, but this should
only be read by humans and not scripts, so I assume it's fine.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The bnxt_qplib_disable_nq() call is redundant as it occurs
after 'goto fail' and hence it called twice. Remove it.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A warning that I thought I had fixed before occasionally comes
back in rare randconfig builds (I found 7 instances in the last
100000 builds, originally it was much more frequent):
drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr':
drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (order <= mr_cache_max_order(dev)) {
^
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I've looked at all those findings again and noticed that they are all
with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns
an error unconditionally and we never initialize or use those variables.
This triggers a condition in gcc iff mr_umem_get() is partially but not
entirely inlined, which in turn depends on the exact combination of
optimization settings. This is a known problem with gcc, with no
easy solution in the compiler, so this adds another workaround that
should be more reliable than my previous attempt.
Returning an error from mlx5_ib_reg_user_mr() earlier means that we
can completely bypass the logic that caused the warning, the compiler
can now see that the variable is never accessed.
Fixes: 14ab8896f5 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
add_sd_cnt in info structure passed to i40iw_create_hmc_obj_type
must be 0 and since it is modified during the call, it must be
reset in the loop. This avoids unnecessarily reprogramming the
SDs multiple times with the same values.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use sqsize instead of I40IW_CQP_SW_SQSIZE_2048 to initialize
cqp_requests elements in the for-loop as sqsize is used
to allocate memory for cqp_requests.
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a stale entry in nes_cm_tcp_context that has apparently
never been used in mainline linux.
I'm trying to kill off all users of timeval as part of the
y2038-safety work, so let's just remove this one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a stale entry in i40iw_cm_tcp_context that apparently
was copied from the 'nes' driver but never used in i40iw.
I'm trying to kill off all users of timeval as part of the
y2038-safety work, so let's just remove this one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to re-calculate the number of pages since it is already
done in ib_umem_get.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Tested-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perhaps the function is better written without
the empty bail: label and without setting ret
and just using return.
Combining the int/bool conversion of any and the
direct returns makes the resulting code clearer.
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable all is being set but is never read after this
hence it can be removed from the for loop initialization.
Cleans up clang warning:
drivers/infiniband/hw/qib/qib_file_ops.c:640:7: warning: Value
stored to 'any' is never read
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This failure exists with qib:
ver_rc_compare_swap:
mismatch, sequence 2, expected 123456789abcdef, got 0
The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.
Fix by using the appropriate inlines to create the request.
Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 261a435184 ("IB/qib,IB/hfi: Use core common header file")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, if a port is queried that has an invalid
Maximum Transmission Unit, driver reports default MTU of 2048.
This in incorrect.
Use default value of 4096 if invalid.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
16B packets require that the path bits are masked with the LMC.
This mask is done correctly in all 16B header creation but was
left out for the RC Acknowledge.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Only insert our special drain CQEs to support ib_drain_sq/rq() after
the wq is flushed. Otherwise, existing but not yet polled CQEs can be
returned out of order to the user application. This can happen when the
QP has exited RTS but not yet flushed the QP, which can happen during
a normal close (vs abortive close).
In addition never count the drain CQEs when determining how many CQEs
need to be synthesized during the flush operation. This latter issue
should never happen if the QP is properly flushed before inserting the
drain CQE, but I wanted to avoid corrupting the CQ state. So we handle
it and log a warning once.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In __flush_qp(), the CQ ARMED bit was being cleared regardless of
whether any notification is actually needed. This resulted in the iser
termination logic getting stuck in ib_drain_sq() because the CQ was not
marked ARMED and thus the drain CQE notification wasn't triggered.
This new bug was exposed when this commit was merged:
commit cbb40fadd3 ("iw_cxgb4: only call the cq comp_handler when the
cq is armed")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mistakenly the driver didn't allow RSS hash fields combinations which
involve both IPv4 and IPv6 protocols. This bug caused to failures for
user's use cases for RSS.
Consequently, this patch fixes this bug and allows any combination that
the HW can support.
Additionally, the patch fixes the driver to return an error in case the
user provides an unsupported mask for RSS hash fields.
Fixes: 3078f5f1bd ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The smp_read_barrier_depends() does nothing at all except on DEC Alpha,
and no current DEC Alpha systems use Infiniband:
lkml.kernel.org/r/20171023085921.jwbntptn6ictbnvj@tower
This commit therefore makes Infiniband depend on !ALPHA and removes
the now-ineffective invocations of smp_read_barrier_depends() from
the InfiniBand driver.
Please note that this patch should not be construed as my saying that
InfiniBand's memory ordering is correct, but rather that this patch does
not in any way affect InfiniBand's correctness. In other words, the
result of applying this patch is bug-for-bug compatible with the original.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: <linux-rdma@vger.kernel.org>
Cc: <linux-alpha@vger.kernel.org>
[ paulmck: Removed drivers/dma/ioat/dma.c per Jason Gunthorpe's feedback. ]
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
In general, dma_alloc_coherent() returns a CPU virtual address and
a DMA address, and we have no guarantee that the underlying memory
even has an associated struct page at all.
This patch gets rid of the page operation after dma_alloc_coherent,
and records the VA returned form dma_alloc_coherent in the struct
of hem in hns RoCE driver.
Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In general dma_alloc_coherent() returns a CPU virtual address and
a DMA address, and we have no guarantee that the virtual address
is either in the linear map or vmalloc. It could be in some other special
place. We have no guarantee that the underlying memory even has
an associated struct page at all.
In current code, there are incorrect usage as below:
dma_alloc_coherent + virt_to_page + vmap. There will probably
introduce coherency problem. This patch fixes it to get rid of
virt_to_page and vmap calls at Leon's suggestion. The related
link: https://lkml.org/lkml/2017/11/7/34
Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the smmu is enabled, the length of sg obtained from
__iommu_map_sg_attrs is not 4kB. When the IOVA is set with the sg
dma address, the IOVA will not be page continuous. so, the current
code has MTPT configuration error that probably cause dma operation
failure. In order to fix this issue, the IOVA should be calculated
based on the sg length.
Fixes: 3958cc5("RDMA/hns: Configure the MTPT in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Established CM event is sent prior to modifying QP to RTS state.
This can result in application closing the connection before the
QP is actually in RTS state. Move sending of established CM
event to after modify QP to RTS.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For loopback, a MPA request event is generated when cm_node
is initialized, which allows applications to act on the
connect request before i40iw_connect() has completed.
In some cases, the reject flow executes in parallel with
the connect flow and doesn't delete an APBVT entry,
because the apbvt_set variable is still not set by the
connect flow. Move the MPA request event to the end of
i40iw_connect() to notify application for a connect
request, after connect has completed.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ARP table entry indexes are aliased to 12bits
instead of the intended 16bits when uploaded to
the QP Context. This will present an issue when the
number of connections exceeds 4096 as ARP entries are
reused. Fix this by adjusting the mask to account for
the full 16bits.
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and
it should not be freed as one in i40iw_schedule_cm_timer().
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently there is only one sdbuf per Control QP (CQP) for
programming Segment Descriptor (SD). If multiple SD work
requests are posted simultaneously, the sdbuf is reused
by all WQEs and new WQEs can corrupt previous WQEs sdbuf
leading to incorrect SD programming.
Fix this by allocating one sdbuf per CQP SQ WQE. When an
SD command is posted, it will use the corresponding sdbuf
for the WQE.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is possible the bth1 variable could be used uninitialized so going
ahead and giving it a default value.
Otherwise we leak stack memory to the network.
Fixes: 5b6cabb0db ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:
init_timer(&t);
f.function = timer_callback;
t.data = timer_callback_arg;
to be converted into:
setup_timer(&t, timer_callback, timer_callback_arg);
The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
- assignments-before-init_timer() cases
- limit the .data case removal to the specific struct timer_list instance
- handling calls by dereference (timer->field vs timer.field)
spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/setup_timer.cocci
@fix_address_of@
expression e;
@@
init_timer(
-&(e)
+&e
, ...)
// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.
@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
... when != func = e2
when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
when != da = e3
-init_timer
+setup_timer
( \(&e\|e\)
+, func, da
);
@r1 exists@
expression t;
identifier f;
position p;
@@
f(...) { ... when any
init_timer@p(\(&t\|t\))
... when any
}
@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@
g(...) { ... when any
\(t.data\|t->data\) = e8
... when any
}
// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@
cocci.include_match(False)
@r3@
expression r1.t, func, e7;
position r1.p;
@@
(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)
Signed-off-by: Kees Cook <keescook@chromium.org>
Here is the set of driver core / debugfs patches for 4.15-rc1.
Not many here, mostly all are debugfs fixes to resolve some
long-reported problems with files going away with references to them in
userspace. There's also some SPDX cleanups for the debugfs code, as
well as a few other minor driver core changes for issues reported by
people.
All of these have been in linux-next for a week or more with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2NCA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUNgCfYq434CFh+YtwITBNYdqkFYFf0ZAAn3qfhh2+
M3rmZzwk2MKBvNQ2npvt
=/8+Y
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core / debugfs patches for 4.15-rc1.
Not many here, mostly all are debugfs fixes to resolve some
long-reported problems with files going away with references to them
in userspace. There's also some SPDX cleanups for the debugfs code, as
well as a few other minor driver core changes for issues reported by
people.
All of these have been in linux-next for a week or more with no
reported issues"
* tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link deferred probe
debugfs: Remove redundant license text
debugfs: add SPDX identifiers to all debugfs files
debugfs: defer debugfs_fsdata allocation to first usage
debugfs: call debugfs_real_fops() only after debugfs_file_get()
debugfs: purge obsolete SRCU based removal protection
IB/hfi1: convert to debugfs_file_get() and -put()
debugfs: convert to debugfs_file_get() and -put()
debugfs: debugfs_real_fops(): drop __must_hold sparse annotation
debugfs: implement per-file removal protection
debugfs: add support for more elaborate ->d_fsdata
driver core: Move device_links_purge() after bus_remove_device()
arch_topology: Fix section miss match warning due to free_raw_capacity()
driver-core: pr_err() strings should end with newlines
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.
Link: http://lkml.kernel.org/r/20170927082038.3782-4-jthumshirn@suse.de
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma
-----BEGIN PGP SIGNATURE-----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=A1oL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is a fairly plain pull request. Lots of driver updates across the
stack, a huge number of static analysis cleanups including a close to
50 patch series from Bart Van Assche, and a number of new features
inside the stack such as general CQ moderation support.
Nothing really stands out, but there might be a few conflicts as you
take things in. In particular, the cleanups touched some of the same
lines as the new timer_setup changes.
Everything in this pull request has been through 0day and at least two
days of linux-next (since Stephen doesn't necessarily flag new
errors/warnings until day2). A few more items (about 30 patches) from
Intel and Mellanox showed up on the list on Tuesday. I've excluded
those from this pull request, and I'm sure some of them qualify as
fixes suitable to send any time, but I still have to review them
fully. If they contain mostly fixes and little or no new development,
then I will probably send them through by the end of the week just to
get them out of the way.
There was a break in my acceptance of patches which coincides with the
computer problems I had, and then when I got things mostly back under
control I had a backlog of patches to process, which I did mostly last
Friday and Monday. So there is a larger number of patches processed in
that timeframe than I was striving for.
Summary:
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
RDMA/core: Rename kernel modify_cq to better describe its usage
IB/mlx5: Add CQ moderation capability to query_device
IB/mlx4: Add CQ moderation capability to query_device
IB/uverbs: Add CQ moderation capability to query_device
IB/mlx5: Exposing modify CQ callback to uverbs layer
IB/mlx4: Exposing modify CQ callback to uverbs layer
IB/uverbs: Allow CQ moderation with modify CQ
iw_cxgb4: atomically flush the qp
iw_cxgb4: only call the cq comp_handler when the cq is armed
iw_cxgb4: Fix possible circular dependency locking warning
RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
IB/core: Only maintain real QPs in the security lists
IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
RDMA/core: Make function rdma_copy_addr return void
RDMA/vmw_pvrdma: Add shared receive queue support
RDMA/core: avoid uninitialized variable warning in create_udata
RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
RDMA/bnxt_re: Set QP state in case of response completion errors
RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
...
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
query_device can now obtain the maximum values for
cq_max_count and cq_period, needed for cq moderation.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
query_device can now obtain the maximum values for
cq_max_count and cq_period, needed for cq moderation.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Exposed mlx5_ib_modify_cq to be called from ib device
verb list.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Exposed mlx4_ib_modify_cq to be called from ib device
verb list.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
__flush_qp() has a race condition where during the flush operation,
the qp lock is released allowing another thread to possibly post a WR,
which corrupts the queue state, possibly causing crashes. The lock was
released to preserve the cq/qp locking hierarchy of cq first, then qp.
However releasing the qp lock is not necessary; both RQ and SQ CQ locks
can be acquired first, followed by the qp lock, and then the RQ and SQ
flushing can be done w/o unlocking.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ULPs completion handler should only be called if the CQ is
armed for notification.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Locking sequence of iw_cxgb4 and RoCE drivers in ib_register_device() is
slightly different and this leads to possible circular dependency locking
warning when both the devices are brought up.
Here is the locking sequence upto ib_register_device():
iw_cxgb4: rtnl_mutex(net stack) --> uld_mutex --> device_mutex
RoCE drivers: device_mutex --> rtnl_mutex
Here is the possibility of cross locking:
CPU #0 (iw_cxgb4) CPU #1 (RoCE drivers)
-> on interface up cxgb4_up()
executed with rtnl_mutex held
-> hold uld_mutex and try
registering ib device
-> In ib_register_device() hold
device_mutex
-> hold device mutex in
ib_register_device
-> try acquiring rtnl_mutex in
ib_enum_roce_netdev()
Current patch schedules the ib_register_device() functionality of
iw_cxgb4 to a workqueue to prevent the possible cross-locking.
Also rename the labels in c4iw_reister_device().
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a real RoCE v2 network it is possible to have two
Sections of network have same IP hence same gid. However
those may have different vlans. During connection resolution
it is important to report the actual vlan on which the
MAD packet was received instead of relying on other means
to resolve vlan-id. ib_find_gid_index should not be used
to resolve the vlan-id using sgid of the local system
where the packet was received.
Our device has the capability to report the actual VLAN-ID
in the GSI qp completions. Since we have the capability our
driver should move away from resolving the vlan-id with the
help of SGID at the destination port.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check on return value and goto label mbx_err are unnecessary.
Addresses-Coverity-ID: 1268780
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the required functions needed to support SRQs. Currently, kernel
clients are not supported. SRQs will only be available in userspace.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Nitish Bhat <bnitish@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Destroy_qp shall wait for any outstanding CQ notification to be
flushed out before proceeding with QP destroy. Flushing the WQ
before destroying the QP.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Moves the driver QP state to error in case of response completion
errors. Handles the scenarios which doesn't generate a terminal CQE.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The code determines if the next ring entry is valid before proceeding
further to read the rest of the entry. The CPU can re-order and read
the rest of the entry first, possibly reading a stale entry, if DMA
of a new entry happens right after reading it.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the driver is loaded it sets the default CCTI value to be 0. When the FM
starts and CCA is disabled the driver sets the max value to 65535 due the driver
subtracting 1 from 0 and the fact that the CCTI value is a u16.
Special case the subtraction to find the index for a 0 value.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass only the lower 16Bits of an Extended LIDs to rvt_cq_entry
to avoid triggering a WARN_ON_ONCE during conversion there.
These upper 16Bits are okay to drop as they are obtained elsewhere.
Fixes: 62ede77799 ("Add OPA extended LID support")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On host shutdown, driver sends 'SMA_Disabled' as a reason
for link down. This is incorrect.
Send 'reboot' as a linkdown reason.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It is invalid to change Link state from Init to Armed if
IsSmConfigurationStarted bit is not set in Attribute modifier
for Set subnet management method in case of PortInfo
and PortStateInfo attribute.
Set response MAD status field bits accordingly to react correctly
in such situations and avoid changing Link state.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA VNIC does not use PIO contexts and instead only uses SDMA
engines. Do not allocate PIO contexts for VNIC ports.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A for loop condition of data_iovs in user_sdma_free_request
is unnecessarily repeated before the loop as an if check.
Remove the if enveloping the loop.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The "2 * UINT_MAX" statement:
if ((u64)(ts - cce->timestamp) > 2 * UINT_MAX) {
is equivalent to:
if ((u64)(ts - cce->timestamp) > UINT_MAX - 1) {
This results in a premature timeout of the cong log entry.
Fix by using unsigned 64 bit integers, removing casts, and using
an algebraic equivalent test to avoid the "2 * UINT_MAX" issue.
Also make use of kernel API to get nanoseconds instead of
open coding.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wrapper functions were used to call the same function
mmu_notifier_mem_invalidate for 2 callbacks in
mmu_notifier.
The commit 7def96f0a9 ("IB/hfi1: update to new mmu_notifier semantic")
removed the invalidate_page callback.
Therefore, the wrapper function is no longer needed.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Timeout of 20 seconds is too long for active wait performed
for 8051 command completion. It was required for scenarios
when transition to polling was requested before offline.quiet
state was reached. Currently wait for offline.quiet is
properly implemented and timeout can be reduced to 1 second.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Duane McCrory <duane.mccrory@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
HFI's are hard-wired to send Device Info frames with
MgmtAllowed bit set to 0. This means in B2B setups,
MgmtAllowed would never be allowed, which prevents
remote opa management tools from working properly.
Assume MgmtAllowed if a neighbor is also an HFI.
Fixes: 98b9ee2002 ("IB/hfi1: Cache neighbor secure data after link up")
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iw_cxgb4 has many BUG_ON()s that were left over from various enhancemnets
made over the years. Almost all of them should just be removed. Some,
however indicate a ULP usage error and can be handled w/o bringing down
the system.
If the condition cannot happen with correctly implemented cxgb4 sw/fw,
then remove the BUG_ON.
If the condition indicates a misbehaving ULP (like CQ overflows), add
proper recovery logic.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While adding a new gid, the driver currently does not return the context
back to the stack. A subsequent del_gid() (e.g, when ip address is changed)
doesn't find the right context in the driver and it ends up dropping that
request. This results in the HW caching a stale gid entry and traffic fails
because of that. Fix by returning the proper context in bnxt_re_add_gid().
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In bnxt_qplib_process_qp_event(), for qp error events we look up the
qp-handle and pass it for further processing. But we don't check if the
handle is NULL. This could lead to a crash in the called functions when
that qp-handle is dereferenced, if the qp is destroyed in the meantime.
Fix this by checking for a valid qp-handle in that function.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Maximal message should be used as a limit to the max message payload allowed,
without the headers. The ConnectX-3 check is done against this value includes
the headers. When the payload is 4K this will cause the NIC to drop packets.
Increase maximal message to 8K as workaround, this shouldn't change current
behaviour because we continue to set the MTU to 4k.
To reproduce;
set MTU to 4296 on the corresponding interface, for example:
ifconfig eth0 mtu 4296 (both server and client)
On server:
ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096
On client:
ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096
Fixes: 6e0d733d92 ("IB/mlx4: Allow 4K messages for UD QPs")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Taking advantage of the optimization which was introduced in previous
commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the
MTT usage for QP and CQ.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Optimize the device performance by assigning multiple physical pages,
which are contiguous, to a single MTT. As a result, the number of MTTs
is reduced and in turn save cache misses of MTTs.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When working over a RoCE network, the UDP source port should be set only
for statically connected QPs (RC, UC and XRC).
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR's QP is created by calling mlx5_ib_create_qp directly, and
therefore the send CQ and the recv CQ on the ibqp weren't assigned.
Assign them right after calling the mlx5_ib_create_qp to assure
that any access to those pointers will work as expected and won't
crash the system as might happen as part of reset flow.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Smatch tool reports the following error:
drivers/infiniband/hw/cxgb4/qp.c:1886
c4iw_create_qp() error: we previously assumed 'ucontext'
could be null (see line 1804)
Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Broadcom driver produces the following compilation warning
drivers/infiniband/hw/bnxt_re/ib_verbs.c:
In function ‘bnxt_re_create_ah’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:668:6:
warning: variable ‘vlan_tag’ set but not used [-Wunused-but-set-variable]
u16 vlan_tag;
Let's remove it till vlan_tag will be implemented properly.
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the PCI write end padding flag to device_cap_flags enum and set it
during mlx5_ib_query_device so it will be reported to user-space.
During WQ/QP creation, set that capability for WQ/QP if user requested
it and HW supports it.
PCI write end padding modification is not supported for now. There's no
such flag for a QP but for a WQ, create and modify use the same flag.
Return an error if PCI write end padding flag is set during modify_wq.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Chelsio cxgb4 HW is big-endian, hence there is need to properly
annotate r2 and stag fields as __be32 and not __u32 to fix the
following sparse warnings.
drivers/infiniband/hw/cxgb4/qp.c:614:16:
warning: incorrect type in assignment (different base types)
expected unsigned int [unsigned] [usertype] r2
got restricted __be32 [usertype] <noident>
drivers/infiniband/hw/cxgb4/qp.c:615:18:
warning: incorrect type in assignment (different base types)
expected unsigned int [unsigned] [usertype] stag
got restricted __be32 [usertype] <noident>
Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the modify QP handler the base_qpn_udp field in the RSS QPC is
overwrite later by irrelevant value assignment. Hence, ingress packets
which gets to the RSS QP will be steered then to a garbage QPN.
The patch fixes this by skipping the above assignment when a RSS QP is
modified, also, the RSS context's attributes assignments are relocated
just before the context is posted to avoid future issues like this.
Additionally, this patch takes the opportunity to change the code to be
disciplined to the device's manual and assigns the RSS QP context just at
RESET to INIT transition.
Fixes:3078f5f1bd8b ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx4's RSS patches submission missed a report of RSS capabilities
which should be reported by the vendor channel in query_device.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The cmd_sn field of CQ doorbell inits for 0. It should be
increment on each first db rung after a completion Event.
if the cmd_sn of notify doorbell Adjacent two times is the
same, the hardware will distinguish it for the same notify
request and update its type according to the priority level
of next event and solicited event.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The calculation of hem index are different between hns_roce_table_get
and hns_roce_table_find. When the table chunk size of TRRL is not
divisible by object size, it will faile to find the trrl table.
This patch is to update the calculation of the hem index in the
hns_roce_table_find to the same as which in the hns_roce_table_get.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
the owner need to be set when posting sqwqe in hip08 RoCE.
The owner be used according to the below algorithm:
The value of owner should be 1 in the first lap, it
should be 0 in the second lap and in turn.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In hip08 RoCE, it need to add the sq_invld_flg field
in QP context for RoCE hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ack timeout's value in qp context shall be a 5-bit value
and be assgined by users. When at of qpc is set zero, the
timer is disabled.
When attr_mask set for IB_QP_TIMEOUT, The ack timeout field
is effective.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the extend sges exist, the sq_cur_sge_blk_addr field in QPC
(qp context) should be configured.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When sig_type of qpc is non-selectable, all sq's wqes will produce
cqe and not depend on the cqe attribute of wqe. When sig_type of
qpc is selectable, The cqe attribute of wqe will decide whether to
produce the cqe.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When send flags is IB_SEND_SOLICITED, the se(solicated event)
field of sqwqe will be set.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When post wr for mixed rdma operation, we need to use fence
mechanism to keep the correct execute order.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The TRRL(Target RDMA Read/aTOMIC List) record the information
of receiving RDMA READ or ATOMIC operation in hip08. It will
be used the hardware. The driver need to assign a continuous
physical address for trrl_ba field of qp context.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The irrl(initiator RDMA Read/Atomic list) base address of qp
context is assigned for addr[63:6]. This patch mainly fixed
it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hardware vendors need to generate RoCEv1 or RoCEv2
packet according to the sgid type configured.
Besides, update the gid table size for hip08 RoCE
device.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of
RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set,
driver will inform ib core that the related hns device can support
RoCEv2, and ib core can generate the gid of the related type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds rereg mr support for hip08.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() to the new debugfs_file_get() and
debugfs_file_put() API.
Fixes: 49d200deaa ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The code that allocates the tx ring in the sdma code fails to take
advantage of kvzalloc variations.
Fix by converting to use kvzalloc_node.
Reported-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver parameter num_user_contexts controls global behavior and
should not be modified by the driver.
This patch eliminates modification of num_user_contexts by using a
local variable to keep track of the value.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The only use for the urg interrupt is for priority PSM packets.
There is no reason for this interrupt to be enabled for kernel
contexts.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds tx_opcode_stats to parallel the
(rx)opcode_stats in the debugfs.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These are the use-cases where the pkey needs to be tested to see
if a packet needs to be dropped.
a) Check if pkey is not FULL_MGMT_P_KEY or LIM_MGMT_P_KEY,
drop the packet as it's not part of the management partition.
Self-originated packets are an exception.
b) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
in the table, the packet is coming from a management node,
and the receiving node is also a management node, so it is safe
for the packet to go through.
c) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is
NOT in the table, drop the packet as LIM_MGMT_P_KEY should
always be in the pkey table. It could be a misconfiguration.
d) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is
NOT in the table, it is safe for the packet to go through
since a non-management node is talking to another non-managment
node.
e) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is in
the table, drop the packet because a non-management node is
talking to a management node, and it could be an attack.
For the implementation, these rules can be simplied to only checking
for (a) and (e). There's no need to check for rule (b) as
the packet doesn't need to be dropped. Rule (c) is not possible in
the driver as LIM_MGMT_P_KEY is always in the pkey table.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
__subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as
operational vls. hfi1_get_ib_cfg() returns vls_operational field in
hfi1_pportdata. The problem with this is that the value is always equal
to vls_supported field in hfi1_pportdata.
The logic to calculate operational_vls is to set value passed by FM
(in __subn_set_opa_portinfo routine). If no value is passed then
default value is stored in operational_vls.
Field actual_vls_operational is calculated on the basis of buffer
control table. Hence, modifying hfi1_get_ib_cfg() to return
actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Patel Jay P <jay.p.patel@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The handler for link init state (HLS_UP_INIT) notifies userspace
(update_statusp()) before enabling the device
(RCV_CTRL_RCV_PORT_ENABLE_SMASK) or setting the device state
(ppd->host_link_state). This causes a race condition where the
userspace thinks the interface is in the INIT state before the driver
has set that state.
Rework the code path to eliminate the race.
Delay setting the init state until after a HW settling period.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When host is shutting down, it invokes the shutdown hook of the
L2 driver where it would attempt to free the MSI-X vectors, but would fail
because some vectors are held by the RoCE driver.
Implement the new hook in the L2 -> RoCE interface which will be invoked so that
the RoCE driver can unregister the device and free up the MSI-X vectors it had
claimed so that L2 can proceed with it's shutdown without failure.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The scqe.stag is actually __b32, fix it.
drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32
Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.
This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit 1cbe6fc86c ("IB/mlx5: Add support for CQE compressing") the
concept of CQE compression was introduced and added a support for 64B
CQE size. This change update the code to support 128B CQE size as well.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow creation of a multi-packet receive queue.
In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
packet RQ, for now only Raw Packet QPs.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It is needed to call modify cq API for modifying cq
context fields for controlling event generation
moderations. This patch mainly adds it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch updates the PD specification to 16M for hip08. And it
updates the numbers of mtt and cqe segments for the buddy.
As the CQE supports hop num 1 addressing, the CQE specification is
64k. This patch updates to set the CQE specification to 64k.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As the increase of the IRRL specification in hip08, the IRRL table
chunk size needs to be updated.
This patch updates the IRRL table chunk size to 256k for hip08.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch updates to support WQE, CQE and PBL page size configurable
feature, which includes base address page size and buffer page size.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Out of order flow is not working for iWARP.
This patch got cut out from initial series that added out
of order support for iWARP.
Make out of order code common for iWARP and iSCSI.
Add new configuration option CONFIG_QED_OOO. Set by
qedr and qedi Kconfigs.
Fixes: d1abfd0b4e ("qed: Add iWARP out of order support")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Control QP (CQP) command backlog list is initialized at
device initialization time. It is not reinitialized in
the reset flow. Move the initialization to CQP creation
time so the list can be initialized correctly for reset as well.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Bob Sharp <Robert.O.Sharp@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If User-space Direct Access (UDA) QP creation fails,
the QP entry is not removed from QoS list. Fix this
by removing QP from QoS list if create QP fails.
Fixes: 0fc2dc5889 ("i40iw: Add Quality of Service support")
Signed-off-by: Ivan Barrera <ivan.d.barrera@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Clear Control Queue Pair (CQP) Head/Tail on CQP
initialization as during an adapter reset, these
values are not reinitialized. Tail is cleared by
writing 0 to CQP's tail register. Head is cleared
by writing 0 to CQP's doorbell register.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Queue depth calculations use a mix of work requests
and actual number of bytes. Consolidate all calculations
using minimum WQE size to avoid confusion.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On a netdev MTU change event, the iWARP
Exception Queue (IEQ) buffers may not be
sized properly to handle the new MTU.
Reinitialize the IEQ with new MTU size on MTU
change event.
Also, add define for the max ethernet frame size
field in IEQ QP context instead of the snd_mss
define which is for iWARP QPs' MSS field.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Completion Event Queues are created and destroyed on
a per device basis as opposed to per User-space Direct
Access resource.
Move ceq_valid to the correct place in i40iw_sc_dev
from i40iw_puda_rsrc.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IPv6 header size is not subtracted from MTU when MSS is
set for QPs.
Save MTU opposed to MSS in the vsi struct during
initialization and calculate the MSS based on IPv4 vs
IPv6 connection.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some structures for post SQ operation are not used.
Remove the following:
i40iw_post_send_w_inv
i40iw_post_inline_send_w_inv
send_w_sol
send_w_inv
send_w_sol_inv
inline_send_w_sol
inline_send_w_inv
inline_send_w_sol_inv
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Consolidate exception_lan_queue under VSI structure
where it belongs. Remove it from device and QP structures.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The field static_rsrc in i40iw_create_qp_info is unused
and not needed. Remove it.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The AE source field in Asynchronous Event Queue Entry (AEQE) is
not set by the hardware for some AEs, but the code assumes it does.
This results in incorrect processing of some AEs.
Fix this by setting ae_src to I40IW_AE_SOURCE_RSVD for those AEs.
Fixes: 86dbcd0f12 ("i40iw: add file to handle cqp calls")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/hw/cxgb4/cm.c
drivers/infiniband/hw/qib/qib_driver.c
drivers/infiniband/hw/qib/qib_mad.c
There were minor fixups needed in these files. Just minor context diffs
due to patches from independent sources touching the same basic area.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The early for-next branch was based on v4.14-rc2, while the shared pull
request I got from Mellanox used a v4.14-rc4 base. I'm making the
branch that was the shared Mellanox pull request the new for-next branch
and merging the early for-next branch into it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since IB/core resolves the destination mac address for user and kernel
consumers, avoid resolving in multiple provider drivers.
Only ib_core resolves DMAC now, therefore resolve_eth_dmac is removed as
exported symbol.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also removes an unused timer and
drops a redundant initialization.
Cc: Steve Wise <swise@chelsio.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
This includes the remaining timers missed in the earlier i40iw patch.
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also removes an unused timer.
Cc: Steve Wise <swise@chelsio.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Switches test of .data field to
.function, since .data will be going away.
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Latest chip requires indexes 32 to 47 be used for the internal HW block
that manages queue mapping.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
test_bit() takes a bit number while the 'flags' field in
struct bnxt_qplib_rcfw was using actual BIT position converted
values.
Fix this by assigning bit numbers and use consistent APIs
all the flag values.
Also logging a message in case of failure.
Thanks to Dan Carpenter for pointing this out.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Provide information about used firmware files via modinfo.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Setting the protocol type should be part of initializing the tx request.
For UC and RC, the current protocol type is part of the qp priv structure.
For ud requests, it needs to be adjusted dynamically, based on the AV
posted with the WQE. This patch will simplify the initialization of the
tx request.
Fixes: 5b6cabb0db ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The PIO trailing buffer was being dynamically allocated
but the kcalloc return value was not being checked. Further,
the GFP_KERNEL was being used even though the send engine
might be called with interrupts disabled.
Since the maximum size of the trailing buffer is only 12
bytes (CRC = 4, LT = 1, Pad = 0 to 7 bytes) just statically
allocate the buffer, remove the alloc entirely and share it
with the SDMA engine by making it global.
Reported-by: Leon Romanovsky <leon@kernel.org>
Fixes: 566d53a826 ("IB/hfi1: Enhance PIO/SDMA send for 16B")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The trace logic prior to the fixes below used to mask the
A bit from the psn. It now mistakenly displays the A bit,
which is already displayed separately.
Fix by adding the appropriate mask to the psn tracing.
Fixes: 228d2af1b7 ("IB/hfi1: Separate input/output header tracing")
Fixes: 863cf89d47 ("IB/hfi1: Add 16B trace support")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid acquiring already acquired hardware mutex and releasing
the unacquired one as these are redundant operations.
Add printouts for such situations to help detect potential errors
within the driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parsing of platform configuration format 4 will fail on meta
version check. Allow meta version 4 during parsing.
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change serdes mode setting to use MISC_CONFIG_BITS in
VERIFY_CAP_LOCAL_LINK_WIDTH register. This method of
setting up serdes loopback is universally compatible
across all firmware versions.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Data structures should not be defined in a header file. Hence move
the min_transport_spec[] definition from a header file to a .c file.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Dave Goodell <dgoodell@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that sparse complains about missing declarations.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Dave Goodell <dgoodell@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Mike Marciniszyn <infinipath@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Due to removal of the EEPROM writing code, the qib_inc_eeprom_err()
macro became a no-op. Remove the code that calls it. Since that
change removes all code that reads the eep_st_masks array, also
remove the code that updates that array and the array itself.
References: commit 18c0b82a3e ("IB/qib: Do not write EEPROM")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with
W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Cc: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Acked-by: Faisal Latif <fasial.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Acked-by: Faisal Latif <fasial.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
References: commit 5fe9dec0d0 ("IB/mlx5: Use blue flame register allocator in mlx5_ib")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the proper primitives to dereference the RCU pointer
upper_dev->ip_ptr. Compile-tested only.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that sparse complains that there is an address
space mismatch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Cc: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the hfi1_handle_cnp_tbl[] from a header file to a .c file
such that only one copy ends up in the hfi1 kernel module. This
patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that building the cxgb4 module with W=1 triggers
a complaint about a local variable that has not been declared static.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Tell sparse what the locking assumptions are for __flush_qp() such
that it does not complain about the locking operations inside that
function.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
helper to pass the timer pointer explicitly.
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. A pointer from nesadapter back to
nesdev was added.
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yonatan Cohen