Thanks to stubs for the NO_DMA=y case, drivers that use the DMA API can
be compile-tested on systems that do not support DMA. Hence the
dependency of BCM2835_VCHIQ on HAS_DMA was dropped to increase compile
coverage.
Unfortunately compilers became smarter, leading to new failures.
E.g. for a CONFIG_SUN3=y allmodconfig kernel with gcc 9.4.0:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c: In function ‘free_pagelist’:
arch/m68k/include/asm/string.h:72:25: warning: argument 2 null where non-null expected [-Wnonnull]
72 | #define memcpy(d, s, n) __builtin_memcpy(d, s, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c:614:4: note: in expansion of macro ‘memcpy’
614 | memcpy((char *)kmap(pages[0]) +
| ^~~~~~
arch/m68k/include/asm/string.h:72:25: note: in a call to built-in function ‘__builtin_memcpy’
72 | #define memcpy(d, s, n) __builtin_memcpy(d, s, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c:614:4: note: in expansion of macro ‘memcpy’
614 | memcpy((char *)kmap(pages[0]) +
| ^~~~~~
This happens because the compiler can trace back the source pointer to a
allocation by dma_alloc_attrs(), which always returns NULL if NO_DMA=y.
Avoid this reinstating the dependency of the BCM2835_VCHIQ symbol on
HAS_DMA, and by restricting the selection of BCM2835_VCHIQ.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/da55bd87eebf1a969dc8ccd807843319833f6c40.1650888813.git.geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ieee80211_check_auth_response() function has a signedness bug because
it's a declared as a u16 but it return -ENOMEM. When you look at it more
closely it returns a mix of error codes including 0xcafe, -ENOMEM, and
a->status which is WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG. This is a mess.
Clean it up to just return standard kernel error codes. We can print
out the a->status before returning a regular error code. The printks
in the caller need to be adjusted as well.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650593435-9017-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following coccicheck error:
drivers/staging/r8188eu/os_dep/usb_intf.c:202:5-8: Unneeded variable: "ret". Return "0" on line 242
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220422021046.121870-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If device_register() fails, device_unregister() should not be called
because it will free some resources that are not allocated.
put_device() should be used instead.
Fixes: 308ee87a2f ("staging: fieldbus: anybus-s: support HMS Anybus-S bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5401a519608d6e1a4e7435c20f4f20b0c5c36c23.1650610082.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Link: https://lore.kernel.org/r/20220422093340.2781311-1-ran.jianping@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mgt_dispatcher, we check that index is a valid index for the
mlme_sta_tbl array. The valid indices for this array are from 0 to
ARRAY_SIZE(mlme_sta_tbl) - 1.
An invalid index is >= ARRAY_SIZE(mlme_sta_tbl). Fix the off by one error
in the check.
Fixes: db84803cd8 ("staging: r8188eu: use ARRAY_SIZE for mlme_sta_tbl")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220422140958.239767-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In <db3b9e990e75573402cda22faf933760f076c033> ("Staging: VME: move VME
drivers out of staging") the vme code, board and bridge drivers were
moved out of the staging tree, remaining only the VME user device
driver.
Since this driver is the only one remaining in staging, such multi-level
structure confuses more than helps. The current structure is as follows:
- drivers/staging/vme/
Makefile
devices/
Kconfig
Makefile
vme_user.c
vme_user.h
The top-level Makefile has the only function of calling another Makefile
into the devices/ subdirectory. This latter only compiles the vme_user
driver, since there is no other in the staging tree.
This patch removes the unnecessary Makefile from the 'vme/' dir, move
the contents of 'vme/devices' into the 'vme/' dir, and renames it to
'vme_user/' (the driver name), allowing a straightforward understanding
of this driver's contents. Furthermore, it updates the MAINTAINERS file
to properly reflect the new paths.
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/2cd7de9a426c443a5ea618682d605ecfd751d798.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KConfig file for VME_USER ('drivers/staging/vme/devices/Kconfig')
sourced at "drivers/vme/boards/KConfig" misses a `depends on` line for
VME_BUS, which is unnoticeable for menuconfig users who aren't be able
to select it through this interface without setting the CONFIG_VME_BUS
option because it's nested on VME_BUS menu entry.
A patch to move appropriately this driver to the "Staging" submenu
([PATCH 1/3], originally sent as a single patch submitted at
https://lore.kernel.org/linux-staging/3fbc5325e94b9ae0666a1f5a56a4e5372bfcea1d.camel@codeagain.dev/T/#t),
however, unveiled this missing `depends on` line, since it moved the
`source` line for VME_USER's KConfig to somewhere else, allowing it to
be compiled without the support for VME_BUS. While it compiles fine and
seems to initialize the driver fine (tested both as module and as built-
in), it seems to make no sense having VME_USER without VME_BUS.
This patches addresses it by adding the VME_BUS to the `depends on` line
at "drivers/staging/vme/devices/Kconfig".
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/00de5644d7c2f8c8878eccf86b761e0602732089.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the VME_USER driver is in the staging tree Kconfig, unlike
other VME drivers already moved to the main portions of the kernel tree.
Its configuration is, however, nested into the VME_BUS config option,
which might be misleading.
Since the staging tree "[...] is used to hold stand-alone drivers and
filesystem that are not ready to be merged into the main portion of the
Linux kernel tree [...]"(from
https://lore.kernel.org/all/20090320172502.GA14647@kroah.com/T/),
staging drivers should appear nested into the Main Menu -> Device
Drivers -> Staging Drivers to make sure the user don't pick it without
being fully aware of its staging status as it could be the case in
Menu -> Device Drivers -> VME bridge support (the current location).
With this change menuconfig users will clearly know this is not a driver
in the main portion of the kernel tree and decide whether to build it or
not with that clearly in mind.
This change goes into the same direction of commit
<4b4cdf3979c32fa3d042d150f49449c74d048553> ("STAGING: Move staging
drivers back to staging-specific menu")
Signed-off-by: Bruno Moreira-Guedes <codeagain@codeagain.dev>
Link: https://lore.kernel.org/r/f6e6d1d2b02385f11848022f154007ef191181c1.1650544175.git.codeagain@codeagain.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the in-kernel structure and flags instead of defining a separate
one. The rtw_ieee80211_channel structure and flags can be replaced by
the ieee80211_channel defined in include/net/cfg80211.h since the flags
serve the same purpose and the ieee80211_channel struct includes the
elements used in the rtw_ieee80211_channel struct.
Signed-off-by: Solomon Tan <wjsota@gmail.com>
Link: https://lore.kernel.org/r/20220421235237.4218-1-wjsota@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author comments "Added by Albert" and "Added by Annie" are sprinkled
through the file. These comments are not useful and can be removed.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/dd22bbe6b018aadec620d1ef8215e19852099f7c.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove braces for single statement block to minimize the number of
empty lines, without loss of readability. Issue found with checkpatch.
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/b96ae957e2ddc519e56813a1c56e770168f67a2d.1650568579.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the entries in OnAction_tbl refers to on_action_spct. This function
reads some information but it performs no action. Remove on_action_spct
and its entry in OnAction_tbl.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike mlme_sta_tbl, OnAction_tbl is an array of structs.
OnAction iterates over the array to find the entry for a specific action
category. No action is performed if a category has no entry.
We can remove the entries that point to the dummy function DoReserved.
These were the last users of DoReserved, the function itself can be
removed as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200805.192083-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the empty OnAtim function. We can set the function pointer in
mlme_sta_tbl to NULL if no action is required for this management frame
subtype.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220421200449.191983-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib_rx_assoc_resp() function has a signedness bug because it's
a declared as a u16 but it return -ENOMEM. When you look at it more
closely it returns a mix of error codes including 0xcafe, -ENOMEM, and
a->status which is WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG. This is a mess.
Clean it up to just return standard kernel error codes. We can print
out the a->status before returning a regular error code. The printks
in the caller need to be adjusted as well.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650529277-7893-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy. So we drop redundant memset.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1650532843-28132-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up unreferenced definitions in hal headers and code.
Signed-off-by: Artur Bujdoso <artur.bujdoso@gmail.com>
Link: https://lore.kernel.org/r/YmD/I19v8sJLrOQo@crux
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, these three get_key functions return -1 when the provided len
value is less a specific key length value, which can result in buffer
overflow depending on how the returned value is used. These functions are
used in three places in ieee80211/ieee80211_wx.c:
ieee80211_wx_get_encode() :
The behavior of this function will be unchanged.
ieee80211_wx_get_encode_ext() :
The result of the get_key function is written to ext->key_len,
resulting in a buffer overflow if the result is negative.
ieee80211_wx_set_encode() :
The behavior of this function will change. When len is less than the
key length value, it will set a default key of all 0.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/Yl/7QPKXer7YtXOs@bertie
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses the checkpatch.pl flag that there should not be a
space after a cast.
Signed-off-by: Solomon Tan <wjsota@gmail.com>
Link: https://lore.kernel.org/r/20220419124318.8028-1-wjsota@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in rtllib_beacons_stop(), which is shown
below:
(Thread 1) | (Thread 2)
| rtllib_send_beacon()
rtllib_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rtllib_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in ieee80211_beacons_stop(), which is shown below:
(Thread 1) | (Thread 2)
| ieee80211_send_beacon()
ieee80211_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | ieee80211_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417135407.109536-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add " == 0" to the condition in both else if branches to address a
possible bug. strcmp returns 0 when its arguments are equal, which
evaluates to false, often leading to errors when used in if statements.
Currently, the statement in the first else if branch does not execute
when its arguments are equal, but it does execute when crypt->ops->name
equals any string other than "WEP" or "TKIP".
Similarly, the second else if branch does not execute when its arguments
are equal, and it only executes when crypt->ops->name equals "TKIP".
The else branch never executes.
It is unlikely that this is working as intended.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Link: https://lore.kernel.org/r/20220416102434.97567-1-remckee0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable negative is being assigned a value that is never read, it is
being re-assigned later. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/staging/iio/resolver/ad2s1210.c:502:3: warning: Value stored
to 'negative' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220418134603.81336-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace macro VNSvInPortB with ioread8. Avoid cast of the return
value is possible with one exception.
The name of macro and the arguments use CamelCase which
is not accepted by checkpatch.pl
Since there are more than one checkpatch issue per line,
more steps are rquired to fix.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/fd71797d9d55d53f95c5c4e2df826bf85dd4626a.1650094595.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace macro MACvGPIOIn with VNSvInPortB.
Next patch will replace all macros VNSvInPortB with ioread8.
The names of macros and the arguments use CamelCase which
is not accepted by checkpatch.pl
Since there are more than one checkpatch issue per line,
more steps are rquired to fix.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0a3c3eb0d4dad544fa281b34c5a70d4a3ab2d9f1.1650094595.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch gets rid of the following error from checkpatch.pl:
WARNING: Unnecessary typecast of c90 int constant.
Signed-off-by: Solomon Tan <solomonbstoner@protonmail.ch>
Link: https://lore.kernel.org/r/YlxGTMBsLqdOIrpC@ArchDesktop
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to linux coding style. Reported by checkpatch:
CHECK: Please use a blank line after function/struct/union/enum declarations
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/20220416191745.7079-1-soumya.negi97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relocate the only macro MAKEWORD that is in use and remove file
tmacro.h. File needs to be changed anyhow because of use of CamelCase
which is not accepted by checkpatch.pl. Reduced code provides
a better overview.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20220416191622.GA11596@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Unisys sub-tree of drivers/staging contains three drivers for the
"Unisys Secure Partition" (s-Par(R)): visorhba, visorinput, visornic.
They have no maintainers, in fact the only one that is listed in
MAINTAINERS has an unreacheable email address. During 2021 and 2022
several patches have been submitted to these drivers but nobody at
Unisys cared of reviewing the changes. Probably, also the
"sparmaintainer" internal list of unisys.com is not anymore read by
interested Unisys' engineers.
Therefore, remove the drivers/staging/unisys directory and delete the
relevant entries in the MAINTAINERS, Kconfig, Makefile files, then
remove also the drivers/visorbus directory which is not anymore needed
(it contained the driver for the virtualized bus for the Unisys s-Par
firmware).
Cc: David Kershner <david.kershner@unisys.com>
Cc: <sparmaintainer@unisys.com>
Cc: Ken Cox <jkc@redhat.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220414103217.32058-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structures
rtw_ieee80211_hdr
rtw_ieee80211_hdr_3addr
rtw_ieee80211_hdr_3addr_qos
in drivers/staging/r8188eu/include/ieee80211.h just duplicate the
in-kernel structures from include/linux/ieee80211.h.
ieee80211_hdr
ieee80211_hdr_3addr
ieee80211_qos_hdr
Remove the rtw_ prefixed structures and use the in-kernel versions.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220418180916.11311-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver allocates eighth urbs per xmit_buf, but uses only first urb.
Allocation of seven remaining urbs wastes memory for nothing.
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Link: https://lore.kernel.org/r/20220417163608.42917-1-insafonov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ARRAY_SIZE instead of hard-coding the number of entries in the
mlme_sta_tbl array.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the DoReserved function pointer with NULL in mlme_sta_tbl. We can
skip the function call for reserved subtypes.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mlme_sta_tbl is an array of struct mlme_handler. mlme_handler's num and
str components are not used. The code in mgt_dispatcher uses the subtype
number of the incoming frame to select the array entry for compiling the
repsonse.
We can remove struct mlme_handler and make mlme_sta_tbl an array of
function pointers.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The index calculation in mgt_dispatcher does not use the frame type. The
4-bit right shift ignores protocol version and frame type.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver's local GetFrameSubType macro returns both frame type and
subtype.
Use the ieee80211 framework to extract the two fields. This shows more
clearly that both type and subtype are read.
Convert everything to host endianness before we use bit operations.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check only once in mgt_dispatcher that the receiver address is the local
address or the broadcast address. The second identical check can be
removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220417102221.466524-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
reported by checkpatch:
Comparisons should place the constant on the right side of the test.
Fix these warnings.
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220414230757.19348-1-mahak_g@cs.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should access the fields of fwhdr only if the check for firmware
header existence is true. Move the affected code into the if block
that checks firmware header existence.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pr_info_once() instead of a static variable and an if statement
to log the firmware version only once.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variables fw_version, fw_subversion, fw_signature in
rtl8188e_firmware_download() are only used in one place. Use the
assigned values directly and remove the variables to make the code
shorter and cleaner.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220417175441.13830-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaibhav Nagare