This is debugfs and there is no much sense to strict the user from
sending as much data as they can. The memdup_user_nul() will anyway
fail if there is not enough memory.
Relax the user input size by removing an artificial limitaion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Current code is suboptimal in three ways:
1) it explicitly terminates the string which is not needed;
2) it might provoke additional faults, because asked lenght might be
bigger than the real one;
3) it consumes more than needed lines in the source.
Instead of using kmalloc() + strncpy_from_user() + terminating, just
utilize memdup_user_nul().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230604131215.78847-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This change adds support for the two pin controllers found on Tegra234.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The audio pin controller drivers depend on PINCTRL_LPASS_LPI, but since
PINCTRL_LPASS_LPI is not the first entry, they are not displayed in
menuconfig as dependent of PINCTRL_LPASS_LPI. Re-order the entries to
fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In menuconfig, some entries depending on PINCTRL_MSM are indented and
expressed as dependening but some not, because of other Kconfig entries
in between,
Move all main Qualcomm SoC pin controller driver entries into new
Kconfig.msm file so they will be nicely ordered in Kconfig file (by
CONFIG_ name) and properly indented as PINCTRL_MSM dependency in
menuconfig.
Functionally this is the same, but since entire file is guarded with "if
PINCTRL_MSM" drop this dependency from individual entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Makefile selected Qualcomm pinctrl drivers only for ARCH_QCOM, making
any COMPILE_TEST options inside Kconfig ((ARCH_QCOM || COMPILE_TEST) or
(OF || COMPILE_TEST)) not effective. Always descent to the qcom
subdirectory to fix this. All individual drivers are selected in
Makefile via dedicated CONFIG entries, thus this should not have
functional impact except when compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The common MSM pinctrl driver code (PINCTRL_MSM) uses
pinconf_generic_dt_node_to_map_group() from GENERIC_PINCONF, which is
not available for compile testing for !OF cases. Drivers actually do
not depend on OF. Move the OF dependency to the entry actually
depending on it and drop any "|| COMPILE_TEST", because OF is required
also for compile testing (lack of OF was never visible in compile
testing because none of the drivers could be compile tested due to
Makefile).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
PINCTRL_MSM depends on GPIOLIB, thus individual driver entries depending
on the first do not have to depend on the latter.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601152026.1182648-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Driver can bind only via ACPI matching and acpi_device_id is there
unconditionally, so drop useless ACPI_PTR() macro.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230601152026.1182648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver adds pinctrl/GPIO support for Intel Meteor Lake-S.
The GPIO controller is based on the next generation GPIO hardware
but still compatible with the one supported by the Intel pinctrl
and GPIO core driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use explicit comparison to BUFCFG_PINMODE_GPIO instead of implying it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the pin may not be configured as open-drain in some
cases because the argument may be 0 for the boolean types of
the pin configurations. Fix this by ignoring the argument.
With that, allow to actually restore pin to the push-pull mode.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use explicit comparison to BUFCFG_PINMODE_GPIO instead of implying it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the pin may not be configured as open-drain in some
cases because the argument may be 0 for the boolean types of
the pin configurations. Fix this by ignoring the argument.
With that, allow to actually restore pin to the push-pull mode.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.
Fixes: ccdf81d08d ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The semantics of INVALID_HWIRQ is rather localized to IPI usage.
Let's keep it that way.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The bias setting (pull-up or pull-down) are bit fields and
we never enable them both, hence use BIT() macro to define
them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use same formatting strings where it makes sense, so linker
will utilize only a single copy of it, otherwise make the
style similar to the rest of the messages of the close enough
semantics.
add/remove: 1/0 grow/shrink: 2/2 up/down: 91/-110 (-19)
Total: Before=17562, After=17543, chg -0.11%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The .data field in struct of_device_id is used as a const member so it's
inappropriate to attach struct s32_pinctrl_soc_info with of_device_id
because some members in s32_pinctrl_soc_info need to be filled by
pinctrl-s32cc at runtime.
For this reason, struct s32_pinctrl_soc_info must be allocated in
pinctrl-s32cc and then create a new struct s32_pinctrl_soc_data in order
to represent const .data in of_device_id. To combine these two structures,
a s32_pinctrl_soc_data pointer is introduced in s32_pinctrl_soc_info.
Besides, use of_device_get_match_data() instead of of_match_device() since
the driver only needs to retrieve the .data from of_device_id.
Link: https://lore.kernel.org/r/20230329041630.8011-1-clin@suse.com/
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SoC-specific data is stored in pmx->soc and that's used throughout
the driver to access this data. The probe function has access to a local
version of that copy and uses it in some occasions. Replace them with
the more standard pmx->soc access for more consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230530105308.1292852-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function table is filled with group information based on other
instance-specific data at runtime. However, the function table can be
shared between multiple instances, causing the ->probe() function for
one instance to overwrite the table of a previously probed instance.
Fix this by sharing only the function names and allocating a separate
function table for each instance.
Fixes: 5a00473607 ("pinctrl: tegra: Separate Tegra194 instances")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230525204258.711186-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Before executing microchip_sgpio_irq_set_type(),
type has already been cleared IRQ_TYPE_SENSE_MASK, see __irq_set_trigger().
Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20230519170716.3459-1-sensor1010@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The AXP209 device has a 4th GPIO which has a slightly different register
setup, where the control + status bits are held in a single register
rather than sharing AXP20X_GPIO20_SS with GPIOs 0-2.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/dde40307f0ebc23b9841c32e702b481ab5193dc4.1684258957.git.noodles@earth.li
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The devm_kasprintf_strarray() function doesn't return NULL on error,
it returns error pointers. Update the checks accordingly.
Fixes: f494c1913c ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks (part 2)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ryan Wanner <ryan.wanner@microchip.com>
Link: https://lore.kernel.org/r/5697980e-f687-47a7-9db8-2af34ae464bd@kili.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable push-pull configuration. Remove integer value argument from
open-drain configuration as it is discarded when pinconf function is
called from gpiolib. Add push-pull do debug and get functions.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/d898c31277f6bce6f7d830edf4332ff605498c7b.1684313910.git.Ryan.Wanner@microchip.com
[Fix two coding style issues]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This
adds it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230515092515.180920-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If device was probed with incorrect DT or ACPI tables, the IO memory
resource would be missing and driver would derefernce NULL pointer in
sc8180x_pinctrl_add_tile_resources(). Add simplep check if IO memory
resource was provided to silence Smatch warning:
drivers/pinctrl/qcom/pinctrl-sc8180x.c:1664 sc8180x_pinctrl_add_tile_resources() error: potentially dereferencing uninitialized 'mres'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230513113510.177666-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reuse the generic pingroup struct from pinctrl.h in msm_pingroup
along with the macro defined.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1684133170-18540-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the msm_function struct to reuse the generic pinfunction
struct. Also, define a generic PINFUNCTION macro that can be used across
qcom target specific pinctrl files to avoid code repetition.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1684133170-18540-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Without this, the gpio cannot be explicitly mux'ed to its gpio function.
Fixes: 83c566806a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for rk806 dvs pinctrl to the existing rk805
driver.
This has been implemented using shengfei Xu's rk806
specific driver from the vendor tree as reference.
Co-developed-by: shengfei Xu <xsf@rock-chips.com>
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-10-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Perform 's@ \t@\t\t@g' so we wouldn't have spaces followed by tabs.
No functional change.
Picked from U-Boot commit 0cf207ec01c ("WS cleanup: remove SPACE(s) followed by TAB")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230507130120.7587-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
was well intentioned to mask a firmware issue on a surface laptop, but it
has a few problems:
1. It had a bug in the loop handling for iteration 63 that lead to other
problems with GPIO0 handling.
2. It disables interrupts that are used internally by the SOC but masked
by default.
3. It masked a real firmware problem in some chromebooks that should have
been caught during development but wasn't.
There has been a lot of other development around s2idle; particularly
around handling of the spurious wakeups. If there is still a problem on
the original reported surface laptop it should be avoided by adding a quirk
to gpiolib-acpi for that system instead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Leverage gpiochip_line_is_irq to check whether a pin has an irq
associated with it. The previous check ("irq == 0") didn't make much
sense. The irq variable refers to the pinctrl irq, and has nothing do to
with an individual pin.
On some systems, during suspend/resume cycle, the firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
Without this patch that caused an interrupt storm.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
commit b26cd9325b ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems. This is because there was no handling in the driver for bit
15 debounce behavior.
Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```
Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration. So align the
Linux driver to do this as well. This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers
were folded into the Mediatek directory and the family is
renamed "mtmips". The Ralink chips live on as Mediatek MIPS
family where new variants can be added. As part of this work
also the device tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas
r8a779g0 and r8a779g0 pin controllers. Generic Renesas
extension for power source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin
controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi
driver.
- Several device tree binding cleanups as the binding
YAML syntax is solidifying.
-----BEGIN PGP SIGNATURE-----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=mMr0
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
the new NXP S32 and nVidia BlueField-3.
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
folded into the Mediatek directory and the family is renamed
"mtmips". The Ralink chips live on as Mediatek MIPS family where
new variants can be added. As part of this work also the device
tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas r8a779g0
and r8a779g0 pin controllers. Generic Renesas extension for power
source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.
- Several device tree binding cleanups as the binding YAML syntax is
solidifying"
* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl-bcm2835.c: fix race condition when setting gpio dir
dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
dt-bindings: pinctrl: qcom: Add few missing functions
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: wpcm450: select MFD_SYSCON
pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
pinctrl: plgpio: Convert to immutable irq_chip
pinctrl: pistachio: Convert to immutable irq_chip
pinctrl: pic32: Convert to immutable irq_chip
pinctrl: sx150x: Convert to immutable irq_chip
pinctrl: stmfx: Convert to immutable irq_chip
pinctrl: st: Convert to immutable irq_chip
pinctrl: mcp23s08: Convert to immutable irq_chip
pinctrl: equilibrium: Convert to immutable irq_chip
pinctrl: npcm7xx: Convert to immutable irq_chip
pinctrl: armada-37xx: Convert to immutable irq_chip
pinctrl: nsp: Convert to immutable irq_chip
...
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code from
the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it, drop
a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the code from
gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap,
gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd
-----BEGIN PGP SIGNATURE-----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=X+sP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
In the past setting the pin direction called pinctrl_gpio_direction()
which uses a mutex to serialize this. That was changed to set the
direction directly in the pin controller driver, but that lost the
serialization mechanism. Since the direction of multiple pins are in
the same register you can have a race condition, something that was
in fact observed with the cec-gpio driver.
Add a new spinlock to serialize writing to the FSEL registers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 1a4541b68e ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()")
Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the 8 GPIOs found on PMI632.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v2-2-98bafa909c36@z3ntu.xyz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl-wpcm450 driver relies on MFD_SYSCON functionality in order
to find some of its MMIO registers. Select MFD_SYSCON from
PINCTRL_WPCM450 to ensure that it's enabled.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230412185049.3782842-1-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
I switched to consistently using irqd_to_hwirq() consistently
while we are at it.
As the driver now needs to get the gpio_chip in the .irq_mask
and .irq_unmask callbacks, I switched to a pattern where we
first fetch the gpio_chip and then the state container from
that in two steps. The compiler will do the same thing anyway.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-9-503788a7f6e6@linaro.org
Convert the driver to immutable irq-chip with a bit of
intuition.
This driver rolls it's own resource handling and does not
use GPIOCHIP_IRQ_RESOURCE_HELPERS.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-8-503788a7f6e6@linaro.org
Convert the driver to immutable irq-chip with a bit of
intuition.
I switched to using irqd_to_hwirq() consistently while we
are at it.
This driver does not use the GPIOCHIP_IRQ_RESOURCE_HELPERS
as it defines its own resource reservations, simply in
order to turn IRQ lines into inputs on initialization.
Also switched the open coded calls to gpiochip_lock_as_irq()
to gpiochip_reqres_irq() so we also get the right module
reference counting.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-7-503788a7f6e6@linaro.org
Convert the driver to immutable irq-chip with a bit of
intuition.
I refactored the way the state container was accessed in
the irq_chip callbacks to all look the same and switch to
use irqd_to_hwirq() while we are at it.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-4-503788a7f6e6@linaro.org
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: openbmc@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-actions@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
This reverts commit b26cd9325b.
This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Retain POCCTRL0 register across s2ram on R-Car D3,
- Add support for Ethernet power-sources on R-Car V3M, V3H, E3, D3,
and V4H,
- Annotate sentinels in tables,
- Add bias pinconf support and PWM pin groups on R-Car H1,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO/kAAKCRCKwlD9ZEnx
cOBMAQDgf4WHB4vsCNp1b0qtkKifu4owHjcfsSnXC3Gxc1J9/QD+IvSGlw+iZbl/
3T391BepM/de/vEwpI5hyXrE31x6lgY=
=a3Sg
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.4 (take two)
- Retain POCCTRL0 register across s2ram on R-Car D3,
- Add support for Ethernet power-sources on R-Car V3M, V3H, E3, D3,
and V4H,
- Annotate sentinels in tables,
- Add bias pinconf support and PWM pin groups on R-Car H1,
- Miscellaneous fixes and improvements.
smatch reports
drivers/pinctrl/pinctrl-mlxbf3.c:162:20: warning: symbol
'mlxbf3_pmx_funcs' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230404004501.1913144-1-trix@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove Thunder Bay specific code as the product got cancelled
and there are no end customers or users.
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20230403120235.939-1-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This code are marked as deprecated since kernel 4.5[1]. Downstream OpenWRT
and upstream switched to the new string compatible 7 years ago. The old
compatible strings can safely be dropped.
[1] commit be14811c03 ("pinctrl/lantiq: introduce new dedicated devicetree bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20230330212225.10214-1-olek2@wp.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the firmware has misconfigured a GPIO it may cause interrupt
status or wake status bits to be set and not asserted. Add these
to debug output to catch this case.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
More fields are to be added, so to keep the display from being
too busy, adjust it.
1) Add a header to all columns
2) Except for interrupt, when fields have no data show empty
3) Remove otherwise blank whitespace
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As the of_node member of struct device always exists, and there is a
dummy of of_device_get_match_data() for the !CONFIG_OF case, there is no
longer a need to protect code using these interfaces with an #ifdef.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/55d72ce46b43ec2f41681cb5ba7ca7fcebdb98d1.1679416005.git.geert+renesas@glider.be
Currently, the Renesas pin control driver supports pins that can switch
their I/O voltage levels between either 1.8V and 3.3V, or between 2.5V
and 3.3V. However, some SoCs have pins that can switch between 1.8V and
2.5V.
Add support for this by replacing the separate SH_PFC_PIN_CFG_IO_VOLTAGE
capability and voltage level flags by a 2-bit field, to cover three
possible I/O voltage switching options.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0c04925457bf3f7e78e7e3851528d9a4c29246da.1678271030.git.geert+renesas@glider.be
Commit 537db25ca3 ("pinctrl: renesas: Add I/O voltage level
flag") introduced new flags to support pins that can switch their
voltage levels between either 1.8V and 3.3V, or between 2.5V and 3.3V.
The old SH_PFC_PIN_CFG_IO_VOLTAGE flag was retained to avoid having to
change existing drivers.
Replace SH_PFC_PIN_CFG_IO_VOLTAGE by SH_PFC_PIN_CFG_IO_VOLTAGE_18_33, to
make the voltage configuration explicit, and to prepare for the advent
of support for more voltage levels.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae5f879c093f3e3cd50ba1495975bccfad81237b.1678271030.git.geert+renesas@glider.be
The POC Control Register 0 (POCCTRL0) on R-Car D3 is not registered in
the pinmux_ioctrl_regs[] array. Hence it is not saved/restored during
suspend/resume, and its contents may be lost after s2ram.
This went unnoticed when improving suspend/resume support in commit
d92ee9cf8e ("pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register
across suspend/resume").
Fix this by moving the pinmux_ioctrl_regs[] array up, and adding the
POCCTRL0 register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d17402b83b1f3fa0f572527c0382027bccb86205.1678271030.git.geert+renesas@glider.be
The semantic of mcp_set_mask() was surprising to me when I first read
that driver. So it was unexpected that in the call
mcp_set_mask(mcp, MCP_OLAT, mask, value);
value was a bool. Make the function a thinner wrapper around
regmap_update_bits() and rename it to also have a similar name.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230324164957.485924-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Qualcomm pinctrl driver has been violating the documented meaning
of PIN_CONFIG_INPUT_ENABLE. That documentation says:
Note that this does not affect the pin's ability to drive output.
...yet the Qualcomm driver's sole action when asked to "enable input"
on a pin is to disable its output.
The Qualcomm driver's implementation stems from the fact that
"output-disable" is a "new" property from 2017. It was introduced in
commit 425562429d ("pinctrl: generic: Add output-enable
property"). The "input-enable" handling in Qualcomm drivers is from
2015 introduced in commit 407f5e392f ("pinctrl: qcom: handle
input-enable pinconf property").
Let's change the Qualcomm driver to move us in the right direction. As
part of this:
1. We'll now support PIN_CONFIG_OUTPUT_ENABLE
2. We'll still support using PIN_CONFIG_INPUT_ENABLE to disable a
pin's output (in violation of the docs) with a big comment in the
code. This is needed because old device trees have "input-enable"
in them and, in some cases, people might need the old
behavior. While we could programmatically change all old device
trees, it doesn't really hurt to keep supporting the old behavior
and we're _supposed_ to try to be compatible with old device trees
anyway.
It can also be noted that the PIN_CONFIG_INPUT_ENABLE handling code
seems to have purposefully ignored its argument. That means that old
boards that had _either_ "input-disable" or "input-enable" in them
would have had the effect of disabling a pin's output. While we could
change this behavior, since we're only leaving the
PIN_CONFIG_INPUT_ENABLE there for backward compatibility we might as
well be fully backward compatible.
NOTE: despite the fact that we'll still support
PIN_CONFIG_INPUT_ENABLE for _setting_ config, we take it away from
msm_config_group_get(). This appears to be only used for populating
debugfs and fixing debugfs to "output enabled" where relevant instead
of "input enabled" makes more sense and has more truthiness.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230323102605.8.Id740ae6a993f9313b58add6b10f6a92795d510d4@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes a similar problem to the one observed in:
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe").
On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.
The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.
Cc: stable@vger.kernel.org
Fixes: dbad75dd1f ("pinctrl: add AMD GPIO driver support.")
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace struct s32_pmx_func with generic struct pinfunction since they
have the same data fields.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-5-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use generic data structure to describe pin control groups in S32 SoC family
and drop duplicated struct members.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-4-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move common codes into smaller inline functions and remove argument checks
that are not actually used by pull up/down bits in the S32 MSCR register.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-3-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Improve error/return code handlings and config checks in order to have
better reliability and simplify driver codes such as removing/changing
improper macros, blanks, print formats and helper calls.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-2-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pin groups for audio on R-Car V4H,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFTVQAKCRCKwlD9ZEnx
cOF/AQCVgxHD3qjF36rJI+QU6/vxmXsrW6d/b9mKgtRYkgRi+QEAkziIjGGu0pOt
Vnjf8O0o45Kxj1V0geDoM6NAqKmxvg0=
=9ugh
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.4
- Add pin groups for audio on R-Car V4H,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230310144721.1544669-1-robh@kernel.org
[Dropped hunk hitting drivers/pinctrl/renesas/pinctrl.c]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
NVIDIA BlueField-3 SoC has a few pins that can be used as GPIOs
or take the default hardware functionality. Add a driver for
the pin muxing.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230315215027.30685-3-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The OF_GPIO option is enabled by default when GPIOLIB is enabled, and
cannot be disabled. Remove it as a reverse dependency where GPIOLIB is also
set as a reverse dependency.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This platform from Ralink was acquired by MediaTek in 2011. Then, MediaTek
introduced new SoCs which utilise this platform. Move the driver to
mediatek pinctrl directory. Rename the ralink core driver to mtmips.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230317213011.13656-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Split the driver out to pinctrl-mt76x8.c. Remove including the unnecessary
headers since is_mt76x8() is not being used anymore.
Introduce a new compatible string to be able to document the pin muxing
information properly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-4-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add new compatible strings to make every SoC, or SoCs that use the same
pinmux data have a unique compatible string. This ensures that the pin
muxing information of every SoC, or a set of SoCs that use the same pinmux
data can be properly documented.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There have been stable releases with the ralink,rt2880-pinmux compatible
string included. Having it removed breaks the ABI. Reintroduce it.
Fixes: e5981cd461 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All LPASS pins have basic GPIO function and most of the code is ready
for that. Add missing glue pieces to allow LPASS pins to work as GPIO,
which is going to be used on MTP8550 and QRD8550 boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux(). This replicates
the commit d21f4b7ffc ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The set_mux callback in SoC TLMM driver (pinctrl-msm.c) uses "group",
not "group_num" for the number of the pin group. Other places of
lpass-lpi also use "group", so let's be consistent for code readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To help gpiolib not fiddle around with the internals of the irqchip
flag the chip as immutable, adding the calls into the gpiolib core
required to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230216-gpio-at91-immutable-v2-1-326ef362dbc7@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The declaration of s32_pinctrl_suspend/s32_pinctrl_resume is hidden
in an #ifdef, causing a compilation failure when CONFIG_PM_SLEEP is
disabled:
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:38: error: 's32_pinctrl_suspend' undeclared here (not in a function); did you mean 's32_pinctrl_probe'?
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:9: note: in expansion of macro 'SET_LATE_SYSTEM_SLEEP_PM_OPS'
754 | SET_LATE_SYSTEM_SLEEP_PM_OPS(s32_pinctrl_suspend,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the bogus #ifdef and __maybe_unused annation on the global
functions, and instead use the proper LATE_SYSTEM_SLEEP_PM_OPS()
macro to pick set the function pointer.
As the function definition is still in the #ifdef block, this leads
to the correct code in all configurations.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230310140250.359147-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/pinctrl/pinctrl-sx150x.c:833:34: error: ‘sx150x_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132702.352832-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, the
ERROROUTC signal is active-low. Hence add the missing "_N" suffix to
the pin function's names.
Resize column 2 of all IPxSR* definitions to accomodate the longer
names.
Fixes: b811062e5f ("pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A")
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1774303989e7d61f08fa81f1c2fa1b394505645f.1669036423.git.geert+renesas@glider.be
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20230306144641.21955-1-quic_mdalam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No instance of "struct imx_pinctrl_soc_info" sets '.generic_pinconf =
true', so all of this is effectively dead code.
To make it easier to understand the actual code, remove all the unused
cruft. This effectively reverts a5cadbbb08 ("pinctrl: imx: add
generic pin config core support").
It was only in use by a single SOC (imx7ulp) for a few releases, and
the commit message of dbffda08f0 ("pinctrl: fsl: imx7ulp: change to
use imx legacy binding") suggests that it won't be used in the
future. Certainly no new user has appeared in 20+ releases, and should
the need arise, this can be dug out of git history again.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230302072132.1051590-1-linux@rasmusvillemoes.dk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit 502df79b86 ("gpiolib: Warn on drivers still using static
gpiobase allocation"), one or more warnings are printed during boot on
systems where static allocation of GPIO base is used:
[ 0.197707] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.199942] stm32f429-pinctrl soc:pinctrl@40020000: GPIOA bank added
[ 0.200711] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.202855] stm32f429-pinctrl soc:pinctrl@40020000: GPIOB bank added
[ 0.203591] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.205704] stm32f429-pinctrl soc:pinctrl@40020000: GPIOC bank added
[ 0.206338] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.208448] stm32f429-pinctrl soc:pinctrl@40020000: GPIOD bank added
[ 0.209182] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.211282] stm32f429-pinctrl soc:pinctrl@40020000: GPIOE bank added
[ 0.212094] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.214270] stm32f429-pinctrl soc:pinctrl@40020000: GPIOF bank added
[ 0.215005] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.217110] stm32f429-pinctrl soc:pinctrl@40020000: GPIOG bank added
[ 0.217845] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.219959] stm32f429-pinctrl soc:pinctrl@40020000: GPIOH bank added
[ 0.220602] gpio gpiochip8: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.222714] stm32f429-pinctrl soc:pinctrl@40020000: GPIOI bank added
[ 0.223483] gpio gpiochip9: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.225594] stm32f429-pinctrl soc:pinctrl@40020000: GPIOJ bank added
[ 0.226336] gpio gpiochip10: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.228490] stm32f429-pinctrl soc:pinctrl@40020000: GPIOK bank added
So let's follow the suggestion and use dynamic allocation.
Tested on STM32F429I-DISC1 board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230227205131.2104082-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case the driver was trying to set an alternate mode for gpio
0 or 32 then the mode was not set correctly. The reason is that
there is computation error inside the function ocelot_pinmux_set_mux
because in this case it was trying to shift to left by -1.
Fix this by actually shifting the function bits and not the position.
Fixes: 4b36082e2e ("pinctrl: ocelot: fix pinmuxing for pins after 31")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230206203720.1177718-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since commit d59f6617ee ("genirq: Allow fwnode to carry name
information only") an IRQ domain is always given a name during
allocation (e.g. used for the debugfs entry).
Drop the no longer valid name assignment, which would lead to an attempt
to free a string constant when removing the domain on late probe
failures (e.g. probe deferral).
Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some options include "MediaTek", some "Mediatek". Rename all to "MediaTek"
to address the naming inconsistency.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230218065108.8958-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are options missing from PINCTRL_MT7981 whilst being on every other
pin controller. Add them.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The custom message has no value except printing the error code,
the same does dev_err_probe(). Let's use the latter for the sake
of unification.
Note that some APIs already have messaging in them and some simply
do not require the current noise.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace devm_clk_get() by devm_clk_get_enabled() and drop
unneeded code pieces. This will make sure we keep the ordering
of the resource allocation correct.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality hence
there is no need for fixes tag.
While at it, switch to use devm_kasprintf_strarray().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The asm-generic/gpio.h file is now always included when
using gpiolib, so just move its contents into linux/gpio.h
with a few minor simplifications.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Andy Shevchenko