With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.
Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.
By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Fixes: 1aac309d32 ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dynamic assignment of IPA interrupt handlers isn't needed; we
only handle three IPA interrupt types, and their handler functions
are now assigned directly. We can get rid of ipa_interrupt_add()
and ipa_interrupt_remove() now, because they serve no purpose.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Declare the microcontroller IPA interrupt handler publicly, and
assign it directly in ipa_interrupt_config(). Make the SUSPEND IPA
interrupt handler public, and rename it ipa_power_suspend_handler().
Assign it directly in ipa_interrupt_config() as well.
This makes it unnecessary to do this in ipa_interrupt_add(). Make
similar changes for removing IPA interrupt handlers.
The next two patches will finish the cleanup, removing the
add/remove functions and the handler array entirely.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose ipa_interrupt_enable() and have functions that register
IPA interrupt handlers enable them directly, rather than having the
registration process do that. Do the same for disabling IPA
interrupt handlers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some source files state copyright dates that are earlier than the
last modification of the file. Change the copyright year to 2022 in
all such cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In review for commit 8ee7ec4890 ("net: ipa: embed interconnect
array in the power structure"), Jakub Kicinski suggested that a
follow-up patch use struct_size() when computing the size of the
IPA power structure, which ends with a flexible array member.
Do that.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220311162423.872645-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ipa_power structure contains a copy of the IPA device pointer,
so there's no need to pass it to ipa_interconnect_init(). We can
also use that pointer for an error message in ipa_power_enable().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than allocating the interconnect array dynamically, represent
the interconnects with a variable-length array at the end of the
ipa_power structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch used bulk interconnect operations to initialize
IPA interconnects one at a time. This rearranges things to use the
bulk interfaces as intended--on all interconnects together. As a
result ipa_interconnect_init_one() and ipa_interconnect_exit_one()
are no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use of_icc_bulk_get() and icc_bulk_put(), icc_bulk_set_bw(), and
icc_bulk_enable() and icc_bulk_disable() to initialize individual
IPA interconnects. Those functions already log messages in the
event of error so we don't need to.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The power interconnect array is now an array of icc_bulk_data
structures, which is what the interconnect bulk enable and disable
functions require.
Get rid of ipa_interconnect_enable() and ipa_interconnect_disable(),
and just call icc_bulk_enable() and icc_bulk_disable() instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The interconnect framework now provides the ability to enable and
disable interconnects without having to change their recorded
"enabled" bandwidth value. Use this mechanism, rather than setting
the bandwidth values to zero and non-zero respectively to disable
and enable the IPA interconnects.
Disable each interconnect before setting its "enabled" average and
peak bandwidth values. Thereafter, enable and disable interconnects
when required rather than setting their bandwidths.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ipa_interconnect structure contains an icc_path pointer, plus an
average and peak bandwidth value. Other than the interconnect name,
this matches the icc_bulk_data structure exactly.
Use the icc_bulk_data structure in place of the ipa_interconnect
structure, and add an initialization of its name field. Then get
rid of the now unnecessary ipa_interconnect structure definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d32 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Finally, rename "ipa_clock.c" to be "ipa_power.c" and "ipa_clock.h"
to be "ipa_power.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson