When doing kbuild tests to see if the objtool changes affected those I
found that there was a measurable regression:
pre post
real 1m13.594 1m16.488s
user 34m58.246s 35m23.947s
sys 4m0.393s 4m27.312s
Perf showed that for small files the increased hash-table sizes were a
measurable difference. Since we already have -l "vmlinux" to
distinguish between the modes, make it also use a smaller portion of
the hash-tables.
This flips it into a small win:
real 1m14.143s
user 34m49.292s
sys 3m44.746s
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.167588731@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Validate that any call out of .noinstr.text is in between
instr_begin() and instr_end() annotations.
This annotation is useful to ensure correct behaviour wrt tracing
sensitive code like entry/exit and idle code. When we run code in a
sensitive context we want a guarantee no unknown code is ran.
Since this validation relies on knowing the section of call
destination symbols, we must run it on vmlinux.o instead of on
individual object files.
Add two options:
-d/--duplicate "duplicate validation for vmlinux"
-l/--vmlinux "vmlinux.o validation"
Where the latter auto-detects when objname ends with "vmlinux.o" and
the former will force all validations, also those already done on
!vmlinux object files.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.106268040@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool keeps per instruction CFI state in struct insn_state and will
save/restore this where required. However, insn_state has grown some
!CFI state, and this must not be saved/restored (that would
loose/destroy state).
Fix this by moving the CFI specific parts of insn_state into struct
cfi_state.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.045821071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's going to be a new struct cfi_state, rename this one to make
place.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.986441913@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Normally objtool ensures a function keeps the stack layout invariant.
But there is a useful exception, it is possible to stuff the return
stack in order to 'inject' a 'call':
push $fun
ret
In this case the invariant mentioned above is violated.
Add an objtool HINT to annotate this and allow a function exit with a
modified stack frame.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.690601403@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Teach objtool a little more about IRET so that we can avoid using the
SAVE/RESTORE annotation. In particular, make the weird corner case in
insn->restore go away.
The purpose of that corner case is to deal with the fact that
UNWIND_HINT_RESTORE lands on the instruction after IRET, but that
instruction can end up being outside the basic block, consider:
if (cond)
sync_core()
foo();
Then the hint will land on foo(), and we'll encounter the restore
hint without ever having seen the save hint.
By teaching objtool about the arch specific exception frame size, and
assuming that any IRET in an STT_FUNC symbol is an exception frame
sized POP, we can remove the use of save/restore hints for this code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.631224674@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instruction sets can include more or less complex operations which might
not fit the currently defined set of stack_ops.
Combining more than one stack_op provides more flexibility to describe
the behaviour of an instruction. This also reduces the need to define
new stack_ops specific to a single instruction set.
Allow instruction decoders to generate multiple stack_op per
instruction.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200327152847.15294-11-jthierry@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the prefix of section name is not '.rodata', the following
function call can never return 0.
strcmp(sec->name, C_JUMP_TABLE_SECTION)
So the name comparison is pointless, just remove it.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Compiling with Clang and CONFIG_KASAN=y was exposing a few warnings:
call to memset() with UACCESS enabled
Document how to fix these for future travelers.
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Suggested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Suggested-by: Matt Helsley <mhelsley@vmware.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some CFI definitions used by generic objtool code have no reason to vary
from one architecture to another. Keep those definitions in generic
code and move the arch-specific ones to a new arch-specific header.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The initial register state is set up by arch specific code. Use the
value the arch code has set when restoring registers from the stack.
Suggested-by: Raphael Gault <raphael.gault@arm.com>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.
Just skip that entry, but still give a warning to discourage useless
entries.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a function fails its validation, it might leave a stale state
that will be used for the validation of other functions. That would
cause false warnings on potentially valid functions.
Reset the instruction state before the validation of each individual
function.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
POP operations are already in the code path where the destination
operand is OP_DEST_REG. There is no need to check the operand type
again.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the check of tools files against kernel equivalent is only
done after every object file has been built. This means one might fix
build issues against outdated headers without seeing a warning about
this.
Check headers before any object is built. Also, make it part of a
FORCE'd recipe so every attempt to build objtool will report the
outdated headers (if any).
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
Fixes: 2a362ecc3e ("objtool: Optimize find_symbol_*() and read_symbols()")
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
Some bug fixes.
Cleanup a couple of issues that surfaced meanwhile.
Disable vhost on ARM with OABI for now - to be fixed
fully later in the cycle or in the next release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6d6ZgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpH3oH/0bJ6o+FiAi8xXgYqm9XXmswrZoZLahjyPay
dA7Sz5nNKVtdSGH9o0wRdcekt0SOI3ilZSkv9nwt9ep/5YzC3brf2hry+nPvMTsA
MhI3IAa7sK1vCXkftwOlx+SIeDfIwsqr+h4SCfMRxlIT0yAmOC8fl2ByT2dIbqnj
dlzwczecHI9LPUEmRWiKH/4Tj5MPZN5IeFSIAE+nA/9cl5h4qVSfYtWD3Y4VQ82g
Rv3mvVE+chaVbPxewaBZ8Y0Avti4tMyzsE0MY+dz5xfh+75hqMfygg//1osbEAbz
SiL5dDcANe8Q+QOc/BxHdj4dqpqUp1ldV+3Lge9k4lWAGnsEMEk=
=GZb2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
Commit 7ed1c1901f ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901f (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang has -Wself-assign enabled by default under -Wall, which always
gets -Werror'ed on this file, causing sync-compare-and-swap to be
disabled by default.
The generally-accepted way to spell "this value is intentionally
unused," is casting it to `void`. This is accepted by both GCC and
Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3
Signed-off-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lkml.kernel.org/r/20200414195638.156123-1-gbiv@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
objtool:
- Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP
is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of the
default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy.
-----BEGIN PGP SIGNATURE-----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=raUm
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and objtool fixes from Thomas Gleixner:
"A set of fixes for x86 and objtool:
objtool:
- Ignore the double UD2 which is emitted in BUG() when
CONFIG_UBSAN_TRAP is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of
the default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy"
* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add Tremont family CPU models
x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
x86/umip: Make umip_insns static
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
objtool: Make BP scratch register warning more robust
objtool: Fix switch table detection in .text.unlikely
objtool: Support Clang non-section symbols in ORC generation
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
- Fix the header line of perf stat output for '--metric-only --per-socket'
- Fix the python build with clang
- The usual tools UAPI header synchronization
-----BEGIN PGP SIGNATURE-----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=Dd1H
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes and updates from Thomas Gleixner:
- Fix the header line of perf stat output for '--metric-only --per-socket'
- Fix the python build with clang
- The usual tools UAPI header synchronization
* tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers: Synchronize linux/bits.h with the kernel sources
tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources
tools headers: Update x86's syscall_64.tbl with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers UAPI: Sync linux/mman.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
perf stat: Fix no metric header if --per-socket and --metric-only set
perf python: Check if clang supports -fno-semantic-interposition
tools arch x86: Sync the msr-index.h copy with the kernel sources
Allow building vringh without IOTLB (that's the case for userspace
builds, will be useful for CAIF/VOD down the road too).
Update for API tweaks.
Don't include vringh with userspace builds.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
The 'old_fd' parameter used for atomic replacement of XDP programs is
supposed to be an FD, but was left as a u32 from an earlier iteration of
the patch that added it. It was converted to an int when read, so things
worked correctly even with negative values, but better change the
definition to correctly reflect the intention.
Fixes: bd5ca3ef93 ("libbpf: Add function to set link XDP fd while specifying old program")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
In commit 65c9362859 ("bpftool: Add struct_ops support") a new
type of command named struct_ops has been added. This command requires
a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info
in bpftool, the helper get_btf_vmlinux() is used.
When running this command on kernel without BTF debug info, this will
lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by
this, btf_free() causes a segfault when executing 'bpftool struct_ops'.
This commit adds pointer validation with IS_ERR not to free invalid
pointer, and this will fix the segfault issue.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
To pick up the changes in these csets:
295bcca849 ("linux/bits.h: add compile time sanity check of GENMASK inputs")
3945ff37d2 ("linux/bits.h: Extract common header for vDSO")
To address this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
diff -u tools/include/linux/bits.h include/linux/bits.h
This clashes with usage of userspace's static_assert(), that, at least
on glibc, is guarded by a ifnded/endif pair, do the same to our copy of
build_bug.h and avoid that diff in check_headers.sh so that we continue
checking for drifts with the kernel sources master copy.
This will all be tested with the set of build containers that includes
uCLibc, musl libc, lots of glibc versions in lots of distros and cross
build environments.
The tools/objtool, tools/bpf, etc were tested as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be needed when syncing the linux/bits.h header, in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d3b1b776ee ("x86/entry/64: Remove ptregs qualifier from syscall table")
cab56d3484 ("x86/entry: Remove ABI prefixes from functions in syscall tables")
27dd84fafc ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn")
Addressing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
That didn't result in any tooling changes, as what is extracted are just
the first two columns, and these patches touched only the third.
$ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
DESCEND plugins
CC /tmp/build/perf/util/syscalltbl.o
INSTALL trace_plugins
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
88be76cdaf ("drm/i915: Allow userspace to specify ringsize on construction")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
455e00f141 ("drm: Add getfb2 ioctl")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:28:45.461821077 -0300
+++ after 2020-04-14 09:28:53.594782685 -0300
@@ -107,6 +107,7 @@
[0xCB] = "SYNCOBJ_QUERY",
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
+ [0xCE] = "MODE_GETFB2",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
9a5788c615 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests")
3c9bd4006b ("KVM: x86: enable dirty log gradually in small chunks")
13da9ae1cd ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED")
e0d2773d48 ("KVM: s390: protvirt: UV calls in support of diag308 0, 1")
19e1227768 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jay Zhou <jianjay.zhou@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
4c8cf31885 ("vhost: introduce vDPA-based backend")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks these new ioctls, making tools such as 'perf
trace' aware of them and possibly allowing to use the strings in
filters, etc:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:12:28.559748968 -0300
+++ after 2020-04-14 09:12:38.781696242 -0300
@@ -24,9 +24,16 @@
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
+ [0x72] = "VDPA_SET_STATUS",
+ [0x74] = "VDPA_SET_CONFIG",
+ [0x75] = "VDPA_SET_VRING_ENABLE",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
[0x26] = "GET_BACKEND_FEATURES",
+ [0x70] = "VDPA_GET_DEVICE_ID",
+ [0x71] = "VDPA_GET_STATUS",
+ [0x73] = "VDPA_GET_CONFIG",
+ [0x76] = "VDPA_GET_VRING_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
077168e241 ("x86/mce/amd: Add PPIN support for AMD MCE")
753039ef8b ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too")
6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
e346b38130 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Add that to 'perf trace's mremap 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Add that to 'perf trace's clone 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get in line with:
8165b57bca ("linux/const.h: Extract common header for vDSO")
And silence this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h'
diff -u tools/include/linux/const.h include/linux/const.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We received a report that was no metric header displayed if --per-socket
and --metric-only were both set.
It's hard for script to parse the perf-stat output. This patch fixes this
issue.
Before:
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket
^C
Performance counter stats for 'system wide':
S0 8 2.6
2.215270071 seconds time elapsed
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000
# time socket cpus
1.000411692 S0 8 2.2
2.001547952 S0 8 3.4
3.002446511 S0 8 3.4
4.003346157 S0 8 4.0
5.004245736 S0 8 0.3
After:
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket
^C
Performance counter stats for 'system wide':
CPI
S0 8 2.1
1.813579830 seconds time elapsed
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000
# time socket cpus CPI
1.000415122 S0 8 3.2
2.001630051 S0 8 2.9
3.002612278 S0 8 4.3
4.003523594 S0 8 3.0
5.004504256 S0 8 3.7
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200331180226.25915-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The set of C compiler options used by distros to build python bindings
may include options that are unknown to clang, we check for a variety of
such options, add -fno-semantic-interposition to that mix:
This fixes the build on, among others, Manjaro Linux:
GEN /tmp/build/perf/python/perf.so
clang-9: error: unknown argument: '-fno-semantic-interposition'
error: command 'clang' failed with exit status 1
make: Leaving directory '/git/perf/tools/perf'
[perfbuilder@602aed1c266d ~]$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-pkgversion='Arch Linux 9.3.0-1' --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++,d --enable-shared --enable-threads=posix --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --enable-default-pie --enable-default-ssp --enable-cet=auto gdc_include_dir=/usr/include/dlang/gdc
Thread model: posix
gcc version 9.3.0 (Arch Linux 9.3.0-1)
[perfbuilder@602aed1c266d ~]$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If func is NULL, a seg fault can result.
This is a theoretical issue which was found by Coverity, ID: 1492002
("Dereference after null check").
Fixes: c705cecc84 ("objtool: Track original function across branches")
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afc628693a37acd287e843bcc5c0430263d93c74.1585761021.git.jpoimboe@redhat.com
Peter Zijlstra