The top-level Makefile invokes "make syncconfig" when necessary.
Then, Kconfig displays the following message when .config is updated.
#
# configuration written to .config
#
It is distracting because "make syncconfig" happens during the build
stage, and does nothing important in most cases.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit improves the messages of the recursive dependency.
Currently, sym->dir_dep.expr is not checked. Hence, any dependency
in property visibility is regarded as the dependency of the symbol.
[Test Code 1]
config A
bool "a"
depends on B
config B
bool "b"
depends on A
[Test Code 2]
config A
bool "a" if B
config B
bool "b"
depends on A
For both cases above, the same message is displayed:
symbol B depends on A
symbol A depends on B
This commit changes the message for the latter, like this:
symbol B depends on A
symbol A prompt is visible depending on B
Also, 'select' and 'imply' are distinguished.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Currently, Kconfig does not complain about the recursive dependency
where 'imply' keywords are involved.
[Test Code]
config A
bool "a"
config B
bool "b"
imply A
depends on A
In the code above, Kconfig cannot calculate the symbol values correctly
due to the circular dependency. For example, allyesconfig followed by
syncconfig results in an odd behavior because CONFIG_B becomes visible
in syncconfig.
$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
#
# configuration written to .config
#
$ cat .config
#
# Automatically generated file; DO NOT EDIT.
# Main menu
#
CONFIG_A=y
$ make syncconfig
scripts/kconfig/conf --syncconfig Kconfig
*
* Restart config...
*
*
* Main menu
*
a (A) [Y/n/?] y
b (B) [N/y/?] (NEW)
To detect this correctly, sym_check_expr_deps() should recurse to
not only sym->rev_dep.expr but also sym->implied.expr .
At this moment, sym_check_print_recursive() cannot distinguish
'select' and 'imply' since it does not know the precise context
where the recursive dependency has been hit. This will be solved
by the next commit.
In fact, even the document and the unit-test are confused. Using
'imply' does not solve recursive dependency since 'imply' addresses
the unmet direct dependency, which 'select' could cause.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Originally, recursive dependency was a fatal error for Kconfig
because Kconfig cannot compute symbol values in such a situation.
Commit d595cea624 ("kconfig: print more info when we see a recursive
dependency") changed it to a warning, which I guess was not intentional.
Get it back to an error again.
Also, rename the unit test directory "warn_recursive_dep" to
"err_recursive_dep" so that it matches to the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Add build-only targets for build_menuconfig, build_nconfig,
build_xconfig, and build_gconfig.
(targets must end in "config" to qualify in top-level Makefile)
This allows these target to be built without execution (e.g., to
look for errors or warnings) and/or to be built and checked by sparse.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead
of Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Dow
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead of
Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove P_ENV property type
kconfig: remove unused sym_get_env_prop() function
kconfig: fix the rule of mainmenu_stmt symbol
init/Kconfig: Use short unix-style option instead of --longname
Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
kbuild: remove auto.conf from prerequisite of phony targets
kbuild: do not update config for 'make kernelrelease'
kbuild: do not update config when running install targets
kbuild: add .DELETE_ON_ERROR special target
kbuild: use 'include' directive to load auto.conf from top Makefile
kconfig: allow all config targets to write auto.conf if missing
kconfig: make syncconfig update .config regardless of sym_change_count
kconfig: create directories needed for syncconfig by itself
kconfig: remove unneeded directory generation from local*config
kconfig: split out useful helpers in confdata.c
kconfig: rename file_write_dep and move it to confdata.c
kconfig: fix typos in description of "choice" in kconfig-language.txt
kconfig: handle format string before calling conf_message_callback()
kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
kconfig: check for pkg-config on make {menu,n,g,x}config
This property is not set by anyone since commit 104daea149 ("kconfig:
reference environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This function is unused since commit 104daea149 ("kconfig: reference
environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The rule of mainmenu_stmt does not have debug print of zconf_lineno(),
but if it had, it would print a wrong line number for the same reason
as commit b2d00d7c61 ("kconfig: fix line numbers for if-entries in
menu tree").
The mainmenu_stmt does not need to eat following empty lines because
they are reduced to common_stmt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, only syncconfig creates or updates include/config/auto.conf
and some other files. Other config targets create or update only the
.config file.
When you configure and build the kernel from a pristine source tree,
any config target is followed by syncconfig in the build stage since
include/config/auto.conf is missing.
We are moving compiler tests from Makefile to Kconfig. It means that
parsing Kconfig files will be more costly since Kconfig invokes the
compiler commands internally. Thus, we want to avoid invoking Kconfig
twice (one for *config to create the .config, and one for syncconfig
to synchronize the auto.conf). If auto.conf does not exist, we can
generate all configuration files in the first configuration stage,
which will save the syncconfig in the build stage.
Please note this should be done only when auto.conf is missing. If
*config blindly did this, time stamp files under include/config/ would
be unnecessarily touched, triggering unneeded rebuild of objects.
I assume a scenario like this:
1. You have a source tree that has already been built
with CONFIG_FOO disabled
2. Run "make menuconfig" to enable CONFIG_FOO
3. CONFIG_FOO turns out to be unnecessary.
Run "make menuconfig" again to disable CONFIG_FOO
4. Run "make"
In this case, include/config/foo.h should not be touched since there
is no change in CONFIG_FOO. The sync process should be delayed until
the user really attempts to build the kernel.
This commit has another motivation; I want to suppress the 'No such
file or directory' warning from the 'include' directive.
The top-level Makefile includes auto.conf with '-include' directive,
like this:
ifeq ($(dot-config),1)
-include include/config/auto.conf
endif
This looks strange because auto.conf is mandatory when dot-config is 1.
I guess only the reason of using '-include' is to suppress the warning
'include/config/auto.conf: No such file or directory' when building
from a clean tree. However, this has a side-effect; Make considers
the files included by '-include' are optional. Hence, Make continues
to build even if it fails to generate include/config/auto.conf. I will
change this in the next commit, but the warning message is annoying.
(At least, kbuild test robot reports it as a regression.)
With this commit, Kconfig will generate all configuration files together
with the .config and I guess it is a solution good enough to suppress
the warning.
Note:
GNU Make 4.2 or later does not display the warning from the 'include'
directive if include files are successfully generated. See GNU Make
commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file
errors.") However, older GNU Make versions are still widely used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
syncconfig updates the .config only when sym_change_count > 0, i.e.
any change in config symbols has been detected.
Not only symbols but also comments are contained in the .config file.
If only comments are updated, they are not fed back to the .config,
then the stale comments are left-over. Of course, this is just a
matter of comments, but why not fix it.
I see some scenarios where this happens.
Scenario A:
1. You have a source tree that has already been configured.
2. Linus increments the version number in the top-level Makefile
(i.e. he commits a new release)
3. You pull it, and run 'make'
4. syncconfig is invoked because the environment variable,
KERNELVERSION is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains a kernel version in the top line:
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.18.0-rc2 Kernel Configuration
... which points to a previous version.
Scenario B:
1. You have a source tree that has already been configured.
2. You upgrade the compiler, but it still has the same version number.
This may happen if you regularly build the latest compiler from
the source code.
3. You run 'make'
4. syncconfig is invoked because the environment variable,
CC_VERSION_TEXT is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains the version string of the compiler:
#
# Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental)
#
... which carries the information of the old compiler.
If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update
the .config file. Otherwise, it is fine to update it regardless of
sym_change_count.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'make syncconfig' creates some files such as include/config/auto.conf,
include/generate/autoconf.h, etc. but the necessary directory creation
relies on scripts/kconfig/Makefile.
To make Kconfig self-contained, create directories as needed in
conf_write_autoconf().
This change allows scripts/kconfig/Makefile cleanups; syncconfig can
be merged into simple-targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 17263baf95 ("kconfig: Create include/generated for
localmodconfig") added the 'mkdir' line because local{yes,mod}config
ran streamline_config.pl followed by silentoldconfig at that time.
Since commit 81d2bc2273 ("kconfig: invoke oldconfig instead of
silentoldconfig from local*config"), no sub-directory is required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Split out helpers:
is_present() - check if the given path exists
is_dir() - check if the given path exists and it is a directory
make_parent_dir() - create the parent directories of the given path
These helpers will be reused in later commits.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
file_write_dep() is called only from conf_write_autoconf().
Move it from util.c to confdata.c to make it static.
Also, rename it to conf_write_dep() since it should belong to
the group of conf_write* functions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As you see in mconf.c and nconf.c, conf_message_callback() hooks are
likely to end up with the boilerplate of vsnprintf(). Process the
string format before calling conf_message_callback() so that it
receives a simple string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Dirk Gouders <dirk@gouders.net>
Over time, the use of the flag SYMBOL_AUTO changed from initially
marking three automatically generated symbols ARCH, KERNELRELEASE and
UNAME_RELEASE to today's effect of protecting symbols from being
written out.
Currently, only symbols of type CHOICE and those with option
defconf_list set have that flag set.
Reflect that change in semantics in the flag's name.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each of 'make {menu,n,g,x}config' uses (needs) pkg-config to make sure
that other required files are present and to determine build flags
settings, but none of these check that pkg-config itself is present.
Add a check for all 4 of these targets and update
Documentation/process/changes.rst to mention 'pkg-config'.
Fixes kernel bugzilla #77511:
https://bugzilla.kernel.org/show_bug.cgi?id=77511
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.
This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374
Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().
Further, place a pointer to print_symbol() in the comment above the
list of known property type.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.
According to the git log, commit a02f0570ae (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced
"if_entry: T_IF expr T_EOL"
by
"if_entry: T_IF expr nl"
but the commit message does not state why this has been done.
When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).
An example for the corrected line numbers:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:4:if
drivers/soc/tegra/Kconfig:6:if
changes to:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:1:if
drivers/soc/tegra/Kconfig:4:if
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When kconfig syntax moved to use $(FOO) for environment variables
localmodconfig was not updated.
Fix so it now works with the new syntax $(FOO)
Fixes: 104daea149 ("kconfig: reference environment variables directly and remove 'option env='")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(newname, "%s%s", dirname, basename);
^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
sprintf(newname, "%s%s", dirname, basename);
^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
sprintf(newname, "%s%s", dirname, basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of tmpname and newname to make GCC happy.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When using a recursively expanded variable, it is a common mistake
to make circular reference.
For example, Make terminates the following code:
X = $(X)
Y := $(X)
Let's detect the circular expansion in Kconfig, too.
On the other hand, a function that recurses itself is a commonly-used
programming technique. So, Make does not check recursion in the
reference with 'call'. For example, the following code continues
running eternally:
X = $(call X)
Y := $(X)
Kconfig allows circular expansion if one or more arguments are given,
but terminates when the same function is recursively invoked 1000 times,
assuming it is a programming mistake.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The special variables, $(filename) and $(lineno), are expanded to a
file name and its line number being parsed, respectively.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Syntax:
$(info,<text>)
$(warning-if,<condition>,<text>)
$(error-if,<condition>,<text)
The 'info' function prints a message to stdout as in Make.
The 'warning-if' and 'error-if' are similar to 'warning' and 'error'
in Make, but take the condition parameter. They are effective only
when the <condition> part is y.
Kconfig does not implement the lazy expansion as used in the 'if'
'and, 'or' functions in Make. In other words, Kconfig does not
support conditional expansion. The unconditional 'error' function
would always terminate the parsing, hence would be useless in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Make expands the lefthand side of assignment statements. In fact,
Kbuild relies on it since kernel makefiles mostly look like this:
obj-$(CONFIG_FOO) += foo.o
Do likewise in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Support += operator. This appends a space and the text on the
righthand side to a variable.
The timing of the evaluation of the righthand side depends on the
flavor of the variable. If the lefthand side was originally defined
as a simple variable, the righthand side is expanded immediately.
Otherwise, the expansion is deferred. Appending something to an
undefined variable results in a recursive variable.
To implement this, we need to remember the flavor of variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit added variable and user-defined function. They
work similarly in the sense that the evaluation is deferred until
they are used.
This commit adds another type of variable, simply expanded variable,
as we see in Make.
The := operator defines a simply expanded variable, expanding the
righthand side immediately. This works like traditional programming
language variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now, we got a basic ability to test compiler capability in Kconfig.
config CC_HAS_STACKPROTECTOR
def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n)
This works, but it is ugly to repeat this long boilerplate.
We want to describe like this:
config CC_HAS_STACKPROTECTOR
bool
default $(cc-option,-fstack-protector)
It is straight-forward to add a new function, but I do not like to
hard-code specialized functions like that. Hence, here is another
feature, user-defined function. This works as a textual shorthand
with parameterization.
A user-defined function is defined by using the = operator, and can
be referenced in the same way as built-in functions. A user-defined
function in Make is referenced like $(call my-func,arg1,arg2), but I
omitted the 'call' to make the syntax shorter.
The definition of a user-defined function contains $(1), $(2), etc.
in its body to reference the parameters. It is grammatically valid
to pass more or fewer arguments when calling it. We already exploit
this feature in our makefiles; scripts/Kbuild.include defines cc-option
which takes two arguments at most, but most of the callers pass only
one argument.
By the way, a variable is supported as a subset of this feature since
a variable is "a user-defined function with zero argument". In this
context, I mean "variable" as recursively expanded variable. I will
add a different flavored variable in the next commit.
The code above can be written as follows:
[Example Code]
success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n)
cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
config CC_HAS_STACKPROTECTOR
def_bool $(cc-option,-fstack-protector)
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_CC_HAS_STACKPROTECTOR=y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, any statement line starts with a keyword with TF_COMMAND
flag. So, the following three lines are dead code.
alloc_string(yytext, yyleng);
zconflval.string = text;
return T_WORD;
If a T_WORD token is returned in this context, it will cause syntax
error in the parser anyway.
The next commit will support the assignment statement where a line
starts with an arbitrary identifier. So, I want the lexer to switch
to the PARAM state only when it sees a command keyword.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This accepts a single command to execute. It returns the standard
output from it.
[Example code]
config HELLO
string
default "$(shell,echo hello world)"
config Y
def_bool $(shell,echo y)
[Result]
$ make -s alldefconfig && tail -n 2 .config
CONFIG_HELLO="hello world"
CONFIG_Y=y
Caveat:
Like environments, functions are expanded in the lexer. You cannot
pass symbols to function arguments. This is a limitation to simplify
the implementation. I want to avoid the dynamic function evaluation,
which would introduce much more complexity.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit adds a new concept 'function' to do more text processing
in Kconfig.
A function call looks like this:
$(function,arg1,arg2,arg3,...)
This commit adds the basic infrastructure to expand functions.
Change the text expansion helpers to take arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If "mainmenu" is not specified, "Linux Kernel Configuration" is used
as a default prompt.
Given that Kconfig is used in other projects than Linux, let's use
a more generic prompt, "Main menu".
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no more caller of sym_expand_string_value().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that environments are expanded in the lexer, conf_parse() does
not need to expand them explicitly.
The hack introduced by commit 0724a7c32a ("kconfig: Don't leak
main menus during parsing") can go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
There are two callers of file_lookup(), but there is no more reason
to expand the given path.
[1] zconf_initscan()
This is used to open the first Kconfig. sym_expand_string_value()
has never been used in a useful way here; before opening the first
Kconfig file, obviously there is no symbol to expand. If you use
expand_string_value() instead, environments in KBUILD_KCONFIG would
be expanded, but I do not see practical benefits for that.
[2] zconf_nextfile()
This is used to open the next file from 'source' statement.
Symbols in the path like "arch/$SRCARCH/Kconfig" needed expanding,
but it was replaced with the direct environment expansion. The
environment has already been expanded before the token is passed
to the parser.
By the way, file_lookup() was already buggy; it expanded a given path,
but it used the path before expansion for look-up:
if (!strcmp(name, file->name)) {
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.
So lets just drop this as it is no longer used.
Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.
This commit fixes some more weirdnesses.
The nconf also needs ncurses packages. HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set. Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf. Let's pass the ncurses flags only to mconf and nconf.
Currently, the presence of ncurses is not checked for nconf. Let's
show a prompt like the mconf case.
According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.
To simplify the Makefile, move the scripting to a separate file,
and use filechk. The shell script is executed everytime xconfig
is run, but it is not a costly script.
In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set. This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.
A Fedora example is here:
https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic
Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.
To speed things up, it would be nice to make it easier to generate a
patch to post the default setting. The output of 'make listnewconfig'
has two issues that limit us:
- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
'oldconfig'
This patch extends 'listnewconfig' to address the above two issues.
This allows us to run a script
make listnewconfig | rhconfig-tool -o patches; git send-email patches/
The output of 'make listnewconfig':
CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW
The new output of 'make listnewconfig':
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Masahiro Yamada