Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Attaching uprobe to text section in THP splits the PMD mapped page table
into PTE mapped entries. On uprobe detach, we would like to regroup PMD
mapped page table entry to regain performance benefit of THP.
However, the regroup is broken For perf_event based trace_uprobe. This
is because perf_event based trace_uprobe calls uprobe_unregister twice
on close: first in TRACE_REG_PERF_CLOSE, then in
TRACE_REG_PERF_UNREGISTER. The second call will split the PMD mapped
page table entry, which is not the desired behavior.
Fix this by only use FOLL_SPLIT_PMD for uprobe register case.
Add a WARN() to confirm uprobe unregister never work on huge pages, and
abort the operation when this WARN() triggers.
Link: http://lkml.kernel.org/r/20191017164223.2762148-6-songliubraving@fb.com
Fixes: 5a52c9df62 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After all uprobes are removed from the huge page (with PTE pgtable), it is
possible to collapse the pmd and benefit from THP again. This patch does
the collapse by calling collapse_pte_mapped_thp().
Link: http://lkml.kernel.org/r/20190815164525.1848545-7-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the newly added FOLL_SPLIT_PMD in uprobe. This preserves the huge
page when the uprobe is enabled. When the uprobe is disabled, newer
instances of the same application could still benefit from huge page.
For the next step, we will enable khugepaged to regroup the pmd, so that
existing instances of the application could also benefit from huge page
after the uprobe is disabled.
Link: http://lkml.kernel.org/r/20190815164525.1848545-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, uprobe swaps the target page with a anonymous page in both
install_breakpoint() and remove_breakpoint(). When all uprobes on a page
are removed, the given mm is still using an anonymous page (not the
original page).
This patch allows uprobe to use original page when possible (all uprobes
on the page are already removed, and the original page is in page cache
and uptodate).
As suggested by Oleg, we unmap the old_page and let the original page
fault in.
Link: http://lkml.kernel.org/r/20190815164525.1848545-3-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
Use DEFINE_STATIC_PERCPU_RWSEM() to initialize dup_mmap_sem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This updates each existing invalidation to use the correct mmu notifier
event that represent what is happening to the CPU page table. See the
patch which introduced the events to see the rational behind this.
Link: http://lkml.kernel.org/r/20190326164747.24405-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).
Users of mmu notifier API track changes to the CPU page table and take
specific action for them. While current API only provide range of virtual
address affected by the change, not why the changes is happening.
This patchset do the initial mechanical convertion of all the places that
calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP
event as well as the vma if it is know (most invalidation happens against
a given vma). Passing down the vma allows the users of mmu notifier to
inspect the new vma page protection.
The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier
should assume that every for the range is going away when that event
happens. A latter patch do convert mm call path to use a more appropriate
events for each call.
This is done as 2 patches so that no call site is forgotten especialy
as it uses this following coccinelle patch:
%<----------------------------------------------------------------------
@@
identifier I1, I2, I3, I4;
@@
static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1,
+enum mmu_notifier_event event,
+unsigned flags,
+struct vm_area_struct *vma,
struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... }
@@
@@
-#define mmu_notifier_range_init(range, mm, start, end)
+#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end)
@@
expression E1, E3, E4;
identifier I1;
@@
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, I1,
I1->vm_mm, E3, E4)
...>
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(..., struct vm_area_struct *VMA, ...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(...) {
struct vm_area_struct *VMA;
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN;
@@
FN(...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, NULL,
E2, E3, E4)
...> }
---------------------------------------------------------------------->%
Applied with:
spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place
spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place
spatch --sp-file mmu-notifier.spatch --dir mm --in-place
Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=WZfC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
In order to have a separate address space for text poking, we need to
duplicate init_mm early during start_kernel(). This, however, introduces
a problem since uprobes functions are called from dup_mmap(), but
uprobes is still not initialized in this early stage.
Since uprobes initialization is necassary for fork, and since all the
dependant initialization has been done when fork is initialized (percpu
and vmalloc), move uprobes initialization to fork_init(). It does not
seem uprobes introduces any security problem for the poking_mm.
Crash and burn if uprobes initialization fails, similarly to other early
initializations. Change the init_probes() name to probes_init() to match
other early initialization functions name convention.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: ard.biesheuvel@linaro.org
Cc: deneen.t.dock@intel.com
Cc: kernel-hardening@lists.openwall.com
Cc: kristen@linux.intel.com
Cc: linux_dti@icloud.com
Cc: will.deacon@arm.com
Link: https://lkml.kernel.org/r/20190426232303.28381-6-nadav.amit@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add "onchange(var)" histogram handler that executes a action when $var
changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered.
ie. onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action.
Currently, to trigger a synthetic event, the name of that event is used
as the handler name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still be
allowed, as long as the synthetic events do not overlap with other
handler names.
- The histogram documentation at testcases were updated for the new
changes.
Added a quicker way to enable set_ftrace_filter files, that will make
it much quicker to bisect tracing a function that shouldn't be traced and
crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it
will select the corresponding function that is in
available_filter_functions).
Some better displaying of the tracing data (and more information was added).
The rest are small fixes and more clean ups to the code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXIXXjRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrSJAQCbGXAvZE+shfKRhbU1cu1C1nwRMHhH
eeRecJs1RChGFgD/TwatD4FzARQPjfk7snQD5KWPpoRc9grUACC2cZcaWwQ=
=LVBI
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change for this release is in the histogram code:
- Add "onchange(var)" histogram handler that executes a action when
$var changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered. ie.
onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action. Currently, to trigger a
synthetic event, the name of that event is used as the handler
name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still
be allowed, as long as the synthetic events do not overlap with
other handler names.
- The histogram documentation at testcases were updated for the new
changes.
Outside of the histogram code, we have:
- Added a quicker way to enable set_ftrace_filter files, that will
make it much quicker to bisect tracing a function that shouldn't be
traced and crashes the kernel. (You can echo in numbers to
set_ftrace_filter, and it will select the corresponding function
that is in available_filter_functions).
- Some better displaying of the tracing data (and more information
was added).
The rest are small fixes and more clean ups to the code"
* tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits)
tracing: Use strncpy instead of memcpy when copying comm in trace.c
tracing: Use strncpy instead of memcpy when copying comm for hist triggers
tracing: Use strncpy instead of memcpy for string keys in hist triggers
tracing: Use str_has_prefix() in synth_event_create()
x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace()
tracing/perf: Use strndup_user() instead of buggy open-coded version
doc: trace: Fix documentation for uprobe_profile
tracing: Fix spelling mistake: "analagous" -> "analogous"
tracing: Comment why cond_snapshot is checked outside of max_lock protection
tracing: Add hist trigger action 'expected fail' test case
tracing: Add alternative synthetic event trace action test case
tracing: Add hist trigger onchange() handler test case
tracing: Add hist trigger snapshot() action test case
tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases
tracing: Add alternative synthetic event trace action syntax
tracing: Add hist trigger onchange() handler Documentation
tracing: Add hist trigger onchange() handler
tracing: Add hist trigger snapshot() action Documentation
tracing: Add hist trigger snapshot() action
tracing: Add conditional snapshot
...
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable uprobe.ref is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the uprobe.ref it might make a difference
in following places:
- put_uprobe(): decrement in refcount_dec_and_test() only
provides RELEASE ordering and control dependency on success
vs. fully ordered atomic counterpart
Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace the license boiler plate with a SPDX license identifier.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul McKenney <paulmck@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190116111308.211981422@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To avoid having to change many call sites everytime we want to add a
parameter use a structure to group all parameters for the mmu_notifier
invalidate_range_start/end cakks. No functional changes with this patch.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
From: Jérôme Glisse <jglisse@redhat.com>
Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3
fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n
Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
due to a missing mutex protection.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXAlffRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq0KAP0eIy6/kwoBocygRLgB6N4naX/zFcw4
m2NiSlYe3NpC6AD/Z1g3wg8bKlm7ar2OzaqE4wQdeKjrvPlUtymUKiwFxA8=
=8Huu
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a single commit that fixes a bug in uprobes SDT code due to a
missing mutex protection"
* tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
Uprobes: Fix kernel oops with delayed_uprobe_remove()
There could be a race between task exit and probe unregister:
exit_mm()
mmput()
__mmput() uprobe_unregister()
uprobe_clear_state() put_uprobe()
delayed_uprobe_remove() delayed_uprobe_remove()
put_uprobe() is calling delayed_uprobe_remove() without taking
delayed_uprobe_lock and thus the race sometimes results in a
kernel crash. Fix this by taking delayed_uprobe_lock before
calling delayed_uprobe_remove() from put_uprobe().
Detailed crash log can be found at:
Link: http://lkml.kernel.org/r/000000000000140c370577db5ece@google.com
Link: http://lkml.kernel.org/r/20181205033423.26242-1-ravi.bangoria@linux.ibm.com
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: syzbot+cb1fb754b771caca0a88@syzkaller.appspotmail.com
Fixes: 1cc33161a8 ("uprobes: Support SDT markers having reference count (semaphore)")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit:
142b18ddc8 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.
However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().
Move the smp_rmb() accordingly. Also amend the comments associated
to the two memory barriers to indicate their actual locations.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes: 142b18ddc8 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Back in January I posted patches to create function based events. These were
the events that you suggested I make to allow developers to easily create
events in code where no trace event exists. After posting those changes for
review, it was suggested that we implement this instead with kprobes.
The problem with kprobes is that the interface is too complex and needs to
be simplified. Masami Hiramatsu posted patches in March and I've been
playing with them a bit. There's been a bit of clean up in the kprobe code
that was inspired by the function based event patches, and a couple of
enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to know
what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you reference
a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW9hdjxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmtbAP9GS/o2WSvsYLSIw4+mF94eCL06lUxp
rRrktkEofm/PagEAl2JNmvHrAJN+LIrajqXTbwlZ7Ckk1rZhCW41Am7qnQs=
=sTUM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change here is the updates to kprobes
Back in January I posted patches to create function based events.
These were the events that you suggested I make to allow developers to
easily create events in code where no trace event exists. After
posting those changes for review, it was suggested that we implement
this instead with kprobes.
The problem with kprobes is that the interface is too complex and
needs to be simplified. Masami Hiramatsu posted patches in March and
I've been playing with them a bit. There's been a bit of clean up in
the kprobe code that was inspired by the function based event patches,
and a couple of enhancements to the kprobe event interface.
- If the arch supports it (we added support for x86), you can place a
kprobe event at the start of a function and use $arg1, $arg2, etc
to reference the arguments of a function. (Before you needed to
know what register or where on the stack the argument was).
- The second is a way to see array of events. For example, if you
reference a mac address, you can add:
echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events
And this will produce:
mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec}
Other changes include
- Exporting trace_dump_stack to modules
- Have the stack tracer trace the entire stack (stop trying to remove
tracing itself, as we keep removing too much).
- Added support for SDT in uprobes"
[ SDT - "Statically Defined Tracing" are userspace markers for tracing.
Let's not use random TLA's in explanations unless they are fairly
well-established as generic (at least for kernel people) - Linus ]
* tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
tracing: Have stack tracer trace full stack
tracing: Export trace_dump_stack to modules
tracing: probeevent: Fix uninitialized used of offset in parse args
tracing/kprobes: Allow kprobe-events to record module symbol
tracing/kprobes: Check the probe on unloaded module correctly
tracing/uprobes: Fix to return -EFAULT if copy_from_user failed
tracing: probeevent: Add $argN for accessing function args
x86: ptrace: Add function argument access API
tracing: probeevent: Add array type support
tracing: probeevent: Add symbol type
tracing: probeevent: Unify fetch_insn processing common part
tracing: probeevent: Append traceprobe_ for exported function
tracing: probeevent: Return consumed bytes of dynamic area
tracing: probeevent: Unify fetch type tables
tracing: probeevent: Introduce new argument fetching code
tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions
tracing: probeevent: Cleanup argument field definition
tracing: probeevent: Cleanup print argument functions
trace_uprobe: support reference counter in fd-based uprobe
perf probe: Support SDT markers having reference counter (semaphore)
...
We assume to have only one reference counter for one uprobe.
Don't allow user to register multiple uprobes having same
inode+offset but different reference counter.
Link: http://lkml.kernel.org/r/20180820044250.11659-3-ravi.bangoria@linux.ibm.com
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Userspace Statically Defined Tracepoints[1] are dtrace style markers
inside userspace applications. Applications like PostgreSQL, MySQL,
Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc
have these markers embedded in them. These markers are added by developer
at important places in the code. Each marker source expands to a single
nop instruction in the compiled code but there may be additional
overhead for computing the marker arguments which expands to couple of
instructions. In case the overhead is more, execution of it can be
omitted by runtime if() condition when no one is tracing on the marker:
if (reference_counter > 0) {
Execute marker instructions;
}
Default value of reference counter is 0. Tracer has to increment the
reference counter before tracing on a marker and decrement it when
done with the tracing.
Implement the reference counter logic in core uprobe. User will be
able to use it from trace_uprobe as well as from kernel module. New
trace_uprobe definition with reference counter will now be:
<path>:<offset>[(ref_ctr_offset)]
where ref_ctr_offset is an optional field. For kernel module, new
variant of uprobe_register() has been introduced:
uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer)
No new variant for uprobe_unregister() because it's assumed to have
only one reference counter for one uprobe.
[1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
Note: 'reference counter' is called as 'semaphore' in original Dtrace
(or Systemtap, bcc and even in ELF) documentation and code. But the
term 'semaphore' is misleading in this context. This is just a counter
used to hold number of tracers tracing on a marker. This is not really
used for any synchronization. So we are calling it a 'reference counter'
in kernel / perf code.
Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
[Only trace_uprobe.c]
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For userspace to tell the difference between a random signal and an
exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result
in userspace seeing si_code == SI_USER (like a random signal) instead
of si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current)
with force_sig(SIG_ILL, current) which gets this right and is
shorter and easier to type.
Fixes: 014940bad8 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails")
Fixes: 0b5256c7f1 ("uprobes: Send SIGILL if handle_trampoline() fails")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
Add addition argument 'arch_uprobe' to uprobe_write_opcode().
We need this in later set of patches.
Link: http://lkml.kernel.org/r/20180809041856.1547-3-ravi.bangoria@linux.ibm.com
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Simplify uprobe_register() function body and let __uprobe_register()
handle everything. Also move dependency functions around to avoid build
failures.
Link: http://lkml.kernel.org/r/20180809041856.1547-2-ravi.bangoria@linux.ibm.com
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Caller of uprobe_register is required to keep the inode and containing
mount point referenced.
There was misuse of igrab() in uprobes.c and trace_uprobe.c. This is
because igrab() will not prevent umount of the containing mount point.
To fix this, we added path to struct trace_uprobe, which keeps the inode
and containing mount reference.
For uprobes.c, it is not necessary to call igrab() in uprobe_register(),
as the caller is required to keep the inode reference. The igrab() is
removed and comments on this requirement is added to uprobe_register().
Link: http://lkml.kernel.org/r/CAELBmZB2XX=qEOLAdvGG4cPx4GEntcSnWQquJLUK1ongRj35cA@mail.gmail.com
Link: http://lkml.kernel.org/r/20180423172135.4050588-2-songliubraving@fb.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Howard McLauchlan <hmclauchlan@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that READ_ONCE() implies smp_read_barrier_depends(), the
get_xol_area() and get_trampoline_vaddr() no longer need their
smp_read_barrier_depends() calls, which this commit removes.
While we are here, convert the corresponding smp_wmb() to an
smp_store_release().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Commit 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().
However, it was overlooked that this introduced an new error path before
the new mm_struct's ->uprobes_state.xol_area has been set to NULL after
being copied from the old mm_struct by the memcpy in dup_mm(). For a
task that has previously hit a uprobe tracepoint, this resulted in the
'struct xol_area' being freed multiple times if the task was killed at
just the right time while forking.
Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather
than in uprobe_dup_mmap().
With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C
program given by commit 2b7e8665b4 ("fork: fix incorrect fput of
->exe_file causing use-after-free"), provided that a uprobe tracepoint
has been set on the fork_thread() function. For example:
$ gcc reproducer.c -o reproducer -lpthread
$ nm reproducer | grep fork_thread
0000000000400719 t fork_thread
$ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events
$ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
$ ./reproducer
Here is the use-after-free reported by KASAN:
BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200
Read of size 8 at addr ffff8800320a8b88 by task reproducer/198
CPU: 1 PID: 198 Comm: reproducer Not tainted 4.13.0-rc7-00015-g36fde05f3fb5 #255
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
Call Trace:
dump_stack+0xdb/0x185
print_address_description+0x7e/0x290
kasan_report+0x23b/0x350
__asan_report_load8_noabort+0x19/0x20
uprobe_clear_state+0x1c4/0x200
mmput+0xd6/0x360
do_exit+0x740/0x1670
do_group_exit+0x13f/0x380
get_signal+0x597/0x17d0
do_signal+0x99/0x1df0
exit_to_usermode_loop+0x166/0x1e0
syscall_return_slowpath+0x258/0x2c0
entry_SYSCALL_64_fastpath+0xbc/0xbe
...
Allocated by task 199:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xfc/0x180
kmem_cache_alloc_trace+0xf3/0x330
__create_xol_area+0x10f/0x780
uprobe_notify_resume+0x1674/0x2210
exit_to_usermode_loop+0x150/0x1e0
prepare_exit_to_usermode+0x14b/0x180
retint_user+0x8/0x20
Freed by task 199:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xa8/0x1a0
kfree+0xba/0x210
uprobe_clear_state+0x151/0x200
mmput+0xd6/0x360
copy_process.part.8+0x605f/0x65d0
_do_fork+0x1a5/0xbd0
SyS_clone+0x19/0x20
do_syscall_64+0x22f/0x660
return_from_SYSCALL_64+0x0/0x7a
Note: without KASAN, you may instead see a "Bad page state" message, or
simply a general protection fault.
Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com
Fixes: 7c05126793 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are going to split <linux/sched/coredump.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/coredump.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We already have the helper, we can convert the rest of the kernel
mechanically using:
git grep -l 'atomic_inc_not_zero.*mm_users' | xargs sed -i 's/atomic_inc_not_zero(&\(.*\)->mm_users)/mmget_not_zero\(\1\)/'
This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.
Link: http://lkml.kernel.org/r/20161218123229.22952-3-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For consistency, it worth converting all page_check_address() to
page_vma_mapped_walk(), so we could drop the former.
Link: http://lkml.kernel.org/r/20170129173858.45174-10-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fix few rmap-related THP bugs", v3.
The patchset fixes handing PTE-mapped THPs in page_referenced() and
page_idle_clear_pte_refs().
To achieve that I've intrdocued new helper -- page_vma_mapped_walk() --
which replaces all page_check_address{,_transhuge}() and covers all THP
cases.
Patchset overview:
- First patch fixes one uprobe bug (unrelated to the rest of the
patchset, just spotted it at the same time);
- Patches 2-5 fix handling PTE-mapped THPs in page_referenced(),
page_idle_clear_pte_refs() and rmap core;
- Patches 6-12 convert all page_check_address{,_transhuge}() users
(plus remove_migration_pte()) to page_vma_mapped_walk() and drop
unused helpers.
I think the fixes are not critical enough for stable@ as they don't lead
to crashes or hangs, only suboptimal behaviour.
This patch (of 12):
For THPs page_check_address() always fails. It leads to endless loop in
uprobe_write_opcode().
Testcase with huge-tmpfs (uprobes cannot probe anonymous memory).
mount -t debugfs none /sys/kernel/debug
mount -t tmpfs -o huge=always none /mnt
gcc -Wall -O2 -o /mnt/test -x c - <<EOF
int main(void)
{
return 0;
}
/* Padding to map the code segment with huge pmd */
asm (".zero 2097152");
EOF
echo 'p /mnt/test:0' > /sys/kernel/debug/tracing/uprobe_events
echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
/mnt/test
Let's split THPs before trying to replace.
Link: http://lkml.kernel.org/r/20170129173858.45174-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
Commit:
72e6ae285a ('ARM: 8043/1: uprobes need icache flush after xol write'
... has introduced an arch-specific method to ensure all caches are
flushed appropriately after an instruction is written to an XOL page.
However, when the XOL area is created and the out-of-line breakpoint
instruction is copied, caches are not flushed at all and stale data may
be found in icache.
Replace a simple copy_to_page() with arch_uprobe_copy_ixol() to allow
the arch to ensure all caches are updated accordingly.
This change fixes uprobes on MIPS InterAptiv (tested on Creator Ci40).
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1481625657-22850-1-git-send-email-marcin.nowakowski@imgtec.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Patch series "mm: unexport __get_user_pages_unlocked()".
This patch series continues the cleanup of get_user_pages*() functions
taking advantage of the fact we can now pass gup_flags as we please.
It firstly adds an additional 'locked' parameter to
get_user_pages_remote() to allow for its callers to utilise
VM_FAULT_RETRY functionality. This is necessary as the invocation of
__get_user_pages_unlocked() in process_vm_rw_single_vec() makes use of
this and no other existing higher level function would allow it to do
so.
Secondly existing callers of __get_user_pages_unlocked() are replaced
with the appropriate higher-level replacement -
get_user_pages_unlocked() if the current task and memory descriptor are
referenced, or get_user_pages_remote() if other task/memory descriptors
are referenced (having acquiring mmap_sem.)
This patch (of 2):
Add a int *locked parameter to get_user_pages_remote() to allow
VM_FAULT_RETRY faulting behaviour similar to get_user_pages_[un]locked().
Taking into account the previous adjustments to get_user_pages*()
functions allowing for the passing of gup_flags, we are now in a
position where __get_user_pages_unlocked() need only be exported for his
ability to allow VM_FAULT_RETRY behaviour, this adjustment allows us to
subsequently unexport __get_user_pages_unlocked() as well as allowing
for future flexibility in the use of get_user_pages_remote().
[sfr@canb.auug.org.au: merge fix for get_user_pages_remote API change]
Link: http://lkml.kernel.org/r/20161122210511.024ec341@canb.auug.org.au
Link: http://lkml.kernel.org/r/20161027095141.2569-2-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Purely cosmetic, no changes in the compiled code.
Perhaps it is just me but I can hardly read __replace_page() because I can't
distinguish "page" from "kpage" and because I need to look at the caller to
to ensure that, say, kpage is really the new page and the code is correct.
Rename them to old_page and new_page, this matches the caller.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Link: http://lkml.kernel.org/r/20160817153704.GC29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.
This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.
Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: stable@vger.kernel.org # 3.17+
Fixes: 00501b531c ("mm: memcontrol: rewrite charge API")
Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
xol_add_vma needs mmap_sem for write. If the waiting task gets killed
by the oom killer it would block oom_reaper from asynchronous address
space reclaim and reduce the chances of timely OOM resolving. Wait for
the lock in the killable mode and return with EINTR if the task got
killed while waiting.
Do not warn in dup_xol_work if __create_xol_area failed due to fatal
signal pending because this is usually considered a kernel issue.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.
For example, the 32-bit version of "__copy_from_user_inatomic()" is
mostly the special cases for the constant size, and it's actually almost
never relevant. Most users aren't actually using a constant size
anyway, and the few cases that do small constant copies are better off
just using __get_user() instead.
So get rid of the unnecessary complexity.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 protection key support from Ingo Molnar:
"This tree adds support for a new memory protection hardware feature
that is available in upcoming Intel CPUs: 'protection keys' (pkeys).
There's a background article at LWN.net:
https://lwn.net/Articles/643797/
The gist is that protection keys allow the encoding of
user-controllable permission masks in the pte. So instead of having a
fixed protection mask in the pte (which needs a system call to change
and works on a per page basis), the user can map a (handful of)
protection mask variants and can change the masks runtime relatively
cheaply, without having to change every single page in the affected
virtual memory range.
This allows the dynamic switching of the protection bits of large
amounts of virtual memory, via user-space instructions. It also
allows more precise control of MMU permission bits: for example the
executable bit is separate from the read bit (see more about that
below).
This tree adds the MM infrastructure and low level x86 glue needed for
that, plus it adds a high level API to make use of protection keys -
if a user-space application calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
this special case, and will set a special protection key on this
memory range. It also sets the appropriate bits in the Protection
Keys User Rights (PKRU) register so that the memory becomes unreadable
and unwritable.
So using protection keys the kernel is able to implement 'true'
PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
PROT_READ as well. Unreadable executable mappings have security
advantages: they cannot be read via information leaks to figure out
ASLR details, nor can they be scanned for ROP gadgets - and they
cannot be used by exploits for data purposes either.
We know about no user-space code that relies on pure PROT_EXEC
mappings today, but binary loaders could start making use of this new
feature to map binaries and libraries in a more secure fashion.
There is other pending pkeys work that offers more high level system
call APIs to manage protection keys - but those are not part of this
pull request.
Right now there's a Kconfig that controls this feature
(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
(like most x86 CPU feature enablement code that has no runtime
overhead), but it's not user-configurable at the moment. If there's
any serious problem with this then we can make it configurable and/or
flip the default"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
mm/core, x86/mm/pkeys: Add execute-only protection keys support
x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
x86/mm/pkeys: Allow kernel to modify user pkey rights register
x86/fpu: Allow setting of XSAVE state
x86/mm: Factor out LDT init from context init
mm/core, x86/mm/pkeys: Add arch_validate_pkey()
mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
x86/mm/pkeys: Add Kconfig prompt to existing config option
x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
x86/mm/pkeys: Dump PKRU with other kernel registers
mm/core, x86/mm/pkeys: Differentiate instruction fetches
x86/mm/pkeys: Optimize fault handling in access_error()
mm/core: Do not enforce PKEY permissions on remote mm access
um, pkeys: Add UML arch_*_access_permitted() methods
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
x86/mm/gup: Simplify get_user_pages() PTE bit handling
...
As Jiri pointed out, this recent commit:
f872f5400c ("mm: Add a vm_special_mapping.fault() method")
breaks uprobes: __create_xol_area() doesn't initialize the new ->fault()
method and this obviously leads to kernel crash when the application
tries to execute the probed insn after bp hit.
We probably want to add uprobes_special_mapping_fault(), this allows to
turn xol_area->xol_mapping into a single instance of vm_special_mapping.
But we need a simple fix, so lets change __create_xol() to nullify the
new member as Jiri suggests.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <tipbot@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160227221128.GA29565@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For protection keys, we need to understand whether protections
should be enforced in software or not. In general, we enforce
protections when working on our own task, but not when on others.
We call these "current" and "remote" operations.
This patch introduces a new get_user_pages() variant:
get_user_pages_remote()
Which is a replacement for when get_user_pages() is called on
non-current tsk/mm.
We also introduce a new gup flag: FOLL_REMOTE which can be used
for the "__" gup variants to get this new behavior.
The uprobes is_trap_at_addr() location holds mmap_sem and
calls get_user_pages(current->mm) on an instruction address. This
makes it a pretty unique gup caller. Being an instruction access
and also really originating from the kernel (vs. the app), I opted
to consider this a 'remote' access where protection keys will not
be enforced.
Without protection keys, this patch should not change any behavior.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: jack@suse.cz
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210154.3F0E51EA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jianping Liu