Commit Graph

79 Commits

Author SHA1 Message Date
Linus Torvalds 37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Marco Franchi 48c926cd34 dt-bindings: Remove leading zeros from bindings notation
Improve the binding example by removing all the leading zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"`

Some unnecessary changes were manually fixed.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-09 17:05:05 -06:00
Sakari Ailus 75f9f7279e dt: bindings: as3645a: Use LED number to refer to LEDs
Use integers (reg property) to tell the number of the LED to the driver
instead of the node name. While both of these approaches are currently
used by the LED bindings, using integers will require less driver changes
for ACPI support. Additionally, it will make possible LED naming using
chip and LED node names, effectively making the label property most useful
for human-readable names only.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-23 21:16:54 +02:00
Linus Torvalds 5f9cc57036 LED updates for 4.14
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZsZswAAoJEL1qUBy3i3wm2cwQANp9Hufui0BYxD7X9bB3sBvX
 LJ2lbwQlZ93gmQo176fvE22wYw90wmf4CG12pdx8CB4TIBOuaEl1EUptaIxHjBkP
 +MOmiGxT0YZgUDmSo+sCL+LHEDWU8gcs8MI5ZkAxgALUb0kYiQySH5UlCJJOJIJv
 ww1A4K1bo6VONli+y8ZDa3eKgkArg1/pXYl2VejNMSkr88fyzf35fOKD44lMUGos
 5KFVWdPMnz1OuVbh199x9vAPZygb4PNzJL1Tf2ntklBfU3mX+582e6uvIPqh4Tuy
 D5ZianpBNtA0IBV4G0UE+n/9rOy9oAr34+Tq9Gv0BRLlQXsC8FMEM5xcCDd1kFCI
 L6FeiGc1YnEtJpUVEhcWzmpww2EBBRKIB9lJK5c8VUlWf/yZME72Al5R8c7uffcE
 hc78eUVwM2fHNmBhmCmK49flC67/LMzHMiaEQ/lSGtGnd8ratclshFuooiPzsJN/
 MSTX2B3yxWvBjwmZMNixY6WasduKKJs4K5xHnHJzyLt0mvClLiwgOvi1Dks0t+Ko
 imE6cdU3LCUeJJb4I9SgHTTjp33CTqq5ZBhbFsgqjNsfj4o/6GmnWxvSZ4ywqJMW
 HwU4iyBKlx2AVfhzIPozuoE67+HJyRYIexsUZi4vt0Pw2qHxwp1RvH+BMQbXGLLg
 rJ/H9ef5BAPRkPWxe1HM
 =E1ff
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED class drivers improvements:

  leds-pca955x:
   - add Device Tree support and bindings
   - use devm_led_classdev_register()
   - add GPIO support
   - prevent crippled LED class device name
   - check for I2C errors

  leds-gpio:
   - add optional retain-state-shutdown DT property
   - allow LED to retain state at shutdown

  leds-tlc591xx:
   - merge conditional tests
   - add missing of_node_put

  leds-powernv:
   - delete an error message for a failed memory allocation in
     powernv_led_create()

  leds-is31fl32xx.c
   - convert to using custom %pOF printf format specifier

  Constify attribute_group structures in:
   - leds-blinkm
   - leds-lm3533

  Make several arrays static const in:
   - leds-aat1290
   - leds-lp5521
   - leds-lp5562
   - leds-lp8501"

* tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: check for I2C errors
  leds: gpio: Allow LED to retain state at shutdown
  dt-bindings: leds: gpio: Add optional retain-state-shutdown property
  leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create()
  leds: lp8501: make several arrays static const
  leds: lp5562: make several arrays static const
  leds: lp5521: make several arrays static const
  leds: aat1290: make array max_mm_current_percent static const
  leds: pca955x: Prevent crippled LED device name
  leds: lm3533: constify attribute_group structure
  dt-bindings: leds: add pca955x
  leds: pca955x: add GPIO support
  leds: pca955x: use devm_led_classdev_register
  leds: pca955x: add device tree support
  leds: Convert to using %pOF instead of full_name
  leds: blinkm: constify attribute_group structures.
  leds: tlc591xx: add missing of_node_put
  leds: tlc591xx: merge conditional tests
2017-09-07 14:33:13 -07:00
Andrew Jeffery 0f34f95876 dt-bindings: leds: gpio: Add optional retain-state-shutdown property
On Baseboard Management Controller (BMC) systems it's sometimes
necessary for a LED to retain its state across a BMC reset (which is
independent of the host system state). Add a devicetree property to
describe this behaviour. The property would typically be used in
conjunction with 'default-state = "keep"'.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29 21:10:40 +02:00
Cédric Le Goater 15201b5de9 dt-bindings: leds: add pca955x
This adds the devicetree bindings for the PCA955x I2C LED blinkers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29 21:10:21 +02:00
Sakari Ailus 535a218d26 media: dt: bindings: Document DT bindings for Analog devices as3645a
Document DT bindings for Analog Devices as3645a flash LED controller which
also supports an indicator LED.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 20:27:24 -04:00
Sean Young afb24eabf9 media: dt-bindings: gpio-ir-tx: add support for GPIO IR Transmitter
Document the device tree bindings for the GPIO IR Bit Banging
Transmitter.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 09:47:04 -04:00
Sean Young af1fd391a5 media: dt-bindings: pwm-ir-tx: Add support for PWM IR Transmitter
Document the device tree bindings for the PWM IR Transmitter.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20 09:46:46 -04:00
Linus Torvalds 4f5dfdd290 LED updates for 4.13
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZXUGpAAoJEL1qUBy3i3wmBdgP/jhpBsA9D+W4grLEzbTSTWSV
 GKm19egbgujyLWkTecs1ICtuPYQFI90xV2HqmoSsXa9BEZHErB7zbubBzPEqS4RW
 ghsqweaLllOe6LtHs/ZvgvTGILaivpvK1R9qawaqJi6Cmg0VZvG8ApQNNpQD6bnj
 YCknKetLK+pdcjVCTaG7hyf+Ess7ASrwiWwIBiU26K+X6p7YpilxT5AylYWH6erl
 s+Lr3U0As86Fj+/ELOgmYBMTO1phZ7r1FSR/sa7RTlfgEgJQxmgagCfAvPGH92K3
 gK0UKKKirzfU08nUliHeHqn1K9ZaTKS15bbRNHpzl3/be/oLCuN3kB/Y/ZWtPgOc
 pEaCkWn2+4TeChlznyEmmTAeJgKLOBlt8ffSlz+wWNNL9wjG/LVm0Gq/eO49rWsG
 fJVbAT/lnWQ5dVEXlzQbw4uKU8DZDpjChjkv7shLMcValUtysnJ/w3edl5Czyx0y
 s2ckFmWnmQwTd+//PoJYnfdywPc3NfpsJD2j2VrEc0unsodAszwrdHdFVmsSgAJY
 u6cbrrxWYakXUcV/6gKVybhdMpNsV4f2KDthxrZmN3JGetQU/zoNsMBrNJu30l3d
 Iifry+UlYNHoozITKyk1+J3atEF6YzMIhuJTP1ifN07tvo5WaSESPFuoJdxLFlyt
 4OZcjjWj+CGqZ6+RSUya
 =5JLc
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "This time we're removing more than adding:

  Removed drivers:

    leds-versatile:
      - all users of the Versatile LED driver are deleted and replaced
        with the very generic leds-syscon

    leds-sead3:
      - SEAD3 is using the generic leds-syscon & regmap based
        register-bit-led driver

  LED class drivers improvements:

    ledtrig-gpio:
      - use threaded IRQ, which both simplifies the code because we can
        drop the workqueue indirection, and it enables using the trigger
        for GPIOs that work with threaded IRQs themselves
      - refresh LED state after GPIO change since the new GPIO may have
        a different state than the old one

    leds-lp55xx:
      - make various arrays static const

    leds-pca963x:
      - add bindings to invert polarity"

* tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: make various arrays static const
  leds: Remove SEAD-3 driver
  leds: trigger: gpio: Use threaded IRQ
  leds: trigger: gpio: Refresh LED state after GPIO change
  leds: Delete obsolete Versatile driver
  leds: pca963x: Add bindings to invert polarity
2017-07-06 11:32:40 -07:00
Rafał Miłecki 80dc6e1cd8 dt-bindings: leds: document new trigger-sources property
Some LEDs can be related to a specific device(s) described in the DT.
This property allows specifying such relations. E.g. USB LED should
usually be used to indicate some USB port(s) state.

Please note this binding is designed to be generic and not influenced by
any operating system design. Linux developers may find "trigger" part a
bit confusing since in Linux triggers are separated drivers. It
shouldn't define the binding though (we shouldn't add an extra level of
indirection).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-27 17:56:59 +02:00
Anders Darander bb29b9cccd leds: pca963x: Add bindings to invert polarity
Add a new DT property, nxp,inverted-out, to invert the polarity
of the output.

Tested on PCA9634.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-14 13:01:29 +02:00
Linus Torvalds e897f267c5 - New Drivers
- Arctic Sand ARC2C0608 LED Backlight
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZAdHKAAoJEFGvii+H/HdhooAP/3CTa+8+94T97DU/o4crK5w1
 W9tMDDdmes0qM4SR37PJDM2HGDt9sprAPvhdhgpPUnm+MR0RYhj4dxxmX7D3sV+y
 GNM0E4hofYfdWiNeSLOPA3c5PT+UaRCjei8wMrFMNYf0JouGFqOSQnhBy6K+W4hs
 k1onp9hm8FoxiZqxaaITIt2Q/nllWPkUyitU5MfzB5DPKkDQygtAUWRFgh+ItLJf
 Hf7Qy30E8EASoncgH28glh7JCVyXpd7/ldUBM/zslw3V1oBdZ3TX3XDyg9NootA7
 szfQ0kM7tgXZXgu6klZVxezIUm/T7dnWyL2ScMyANj6l2jgNZ/uwzYYmGauHAcFl
 zWkit6+9D9ZKXMnrxq3cP2rJ6NryJOa+0yGl0mJ7EWfIB/4cXbt6JRVcF3rFfBzg
 EndvUTJsIwlDIgoj+IREF6FD4oyLRC7YE3HAa65Hn7rxilxej3Q8uPJ8n0AzxbBK
 8sbypPCU40kJg9N5gSPIdUHEIynYicO/K/4invnF8nQc4915Nr0pnUsrI5xiwHez
 9qRVaTpaTuf5mARRjBaX0qDRz2ssccOET4hpFiXumSWhKjanOqQ3k9o2QE6qTbor
 FIt7Ik6jabXzqC+ZuEalxhjvRCHC8FguCWCCanwFeMe6dB0COY2hzidukUPQuTgd
 LgcqrMKt1Kj674e7DenB
 =qfK6
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight update from Lee Jones:
 "New Arctic Sand ARC2C0608 LED Backlight driver"

* tag 'backlight-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: Add support for Arctic Sand LED backlight driver chips
  dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight
2017-05-03 12:11:44 -07:00
Olimpiu Dejeu ce9d22573d dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight
Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-25 09:21:04 +01:00
Felix Brack 28c5fe9901 leds: pca9532: Extend pca9532 device tree support
This patch extends the device tree support for the pca9532 by adding
the leds 'default-state' property.

Signed-off-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-04-19 20:27:50 +02:00
Sebastian Reichel cd3b0b0532 leds: cpcap: new driver
Motorola CPCAP is a PMIC (power management integrated circuit) found
in multiple smartphones. This driver adds support for the chip's LED
controllers. This introduces support for all controllers used by the
Droid 4. According to Motorola's driver (no datasheets available)
there a couple of more LED controllers. I did not add support for
them, since I cannot verify that they work with my modifications.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-29 21:02:27 +02:00
Sean Wang 6234004ce4 dt-bindings: leds: Add document bindings for leds-mt6323
This patch adds documentation for devicetree bindings for LED support on
MT6323 PMIC.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-21 20:13:19 +01:00
Linus Torvalds ff58d005cd media updates for v4.11-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYrH0jAAoJEAhfPr2O5OEVwaAQAJDaz4Qs7qt8mNDUerxT/ec0
 soiA5Bg8Xaa2WXmGgfPNXBTy5N6X0ArhvGoUQxMp6ef1Wjw8btjs36PnPUmMfbq6
 /Hb6mnU7g8hkXRCeSRI9ATCAxcQy+pR0by48+BX5Do/KS0b9DICMT83sMkikAmAb
 Y1ATUpc2kmCLY7RgSOI/HXOWV/2pC4OwhscXjj6BE9BLmiRY9eYOsbcFQ+cJoz6G
 jiTUL68M0MZxkxeFiuWzTgRJ0F00HTqjXFeI2ccynmwKO4etXmI0kFi2om2bXVsc
 cLHn6SJTByoHeIbtBhh2InsBvyT7oODOnNcwkpV8PUuBnmQc9F3uUufxgVRTwQTW
 6wv3pqJ4fHpNOWWejYNehmCVVHN9w1Bx8r4T1DB5a6UdlZ5yModOW93NV3JtPFSD
 xfsIR6fiETcVpsxrKmBzqvUnxEKduinQPPCQi/Xcr9Ups1WRSHkEaHqGtRhYqYKp
 gDp5QAwXmGphrJKuJHo/v3wl9l3b5qvKsoyt+ScNwr56qlMkgWf95zahRg0BMh88
 ytu+mE3EpxhZzXKTHw0F9OdU54uXPfN0VzzIvP4mUyDVpJLa+OWDGSw0HGLAGrvt
 YHSvs9KYqW4m9Gr/+zwMQAm3CDD26vIGRIhyC8yRIRtf8a8fpPGxbyjse+RhaWmO
 Rj/UZhR3incKUurT0cqI
 =LgNQ
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new drivers:
       - i.MX6 Video Data Order Adapter's (VDOA)
       - Toshiba et8ek8 5MP sensor
       - STM DELTA multi-format video decoder V4L2 driver
       - SPI connected IR LED
       - Mediatek IR remote receiver
       - ZyDAS ZD1301 DVB USB interface driver

 - new RC keymaps

 - some very old LIRC drivers got removed from staging

 - RC core gained support encoding IR scan codes

 - DVB si2168 gained support for DVBv5 statistics

 - lirc_sir driver ported to rc-core and promoted from staging

 - other bug fixes, board additions and driver improvements

* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
  [media] mtk-vcodec: fix build warnings without DEBUG
  [media] zd1301: fix building interface driver without demodulator
  [media] usbtv: add sharpness control
  [media] cxusb: Use a dma capable buffer also for reading
  [media] ttpci: address stringop overflow warning
  [media] dvb-usb-v2: avoid use-after-free
  [media] add Hama Hybrid DVB-T Stick support
  [media] et8ek8: Fix compiler / Coccinelle warnings
  [media] media: fix semicolon.cocci warnings
  [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
  [media] v4l: of: check for unique lanes in data-lanes and clock-lanes
  [media] coda/imx-vdoa: constify structs
  [media] st-delta: debug: trace stream/frame information & summary
  [media] st-delta: add mjpeg support
  [media] st-delta: EOS (End Of Stream) support
  [media] st-delta: rpmsg ipc support
  [media] st-delta: add memory allocator helper functions
  [media] st-delta: STiH4xx multi-format video decoder v4l2 driver
  [media] MAINTAINERS: add st-delta driver
  [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
  ...
2017-02-21 16:58:32 -08:00
Andi Shyti 182c2909e2 [media] Documentation: bindings: add documentation for ir-spi device driver
Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:20:18 -02:00
Rafał Miłecki e64b8cc72b DT: leds: Improve examples by adding some context
During my work on some new LED trigger I tried adding example similar to
the existing ones which received following comment from Rob:
> It's not really clear in the example this is an LED node as it is
> incomplete.

Keeping that in mind I suggest adding context for the existing example
entries in hope to make documentation more clear.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-01-05 23:00:54 +01:00
Matt Ranostay 35c7d30179 leds: pca963x: workaround group blink scaling issue
PCA9632TK part seems to incorrectly blink at ~1.3x of the programmed
rate. This patchset add a nxp,period-scale devicetree property to
adjust for this misconfiguration.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-11-22 12:07:04 +01:00
Linus Walleij 1d1a77ddc8 leds: centralize definition of "default-state" property
Four different drivers define the "default-state" property.
Move this into the common.txt common LEDs properties.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-08-19 21:05:39 +02:00
Linus Walleij 9a6b1f608a leds: pm8058: add device tree bindings
This adds the device tree bindings for the PM8058 LEDs.

Cc: devicetree@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-08-16 22:37:20 +02:00
H. Nikolaus Schaller e68015d197 DT: leds: Add bindings for ISSI is31fl319x
This adds a binding description for ISSI is31fl319x LED controllers.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-08-15 14:02:35 +02:00
Linus Torvalds 7a66ecfd31 - New Functionality
- Add support for an enable regulator to lp855x_bl
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXnxc3AAoJEFGvii+H/HdhWqMP+wV7w4p8lfO7sjA3Bbb4IQCv
 A0Rh2Xog1xVr/abFo4WE43oILZ5EiqWd/89vJJkidgtGBknUTxxICS5bh8Eloy8A
 0LOWdpjHnbrYKHFrmsdXM9nwOdO4GCaUXO3TaKUuuRsiMqpHQ7h5t/+beTdFCpx9
 6eOxeCvcLI3Qt3Fzn//Y6Nhe2TZKg3POc5b8Ces9LbsBkFs4XUwrhkvD1i14UM+E
 dPHNn7faCf0rxvvyzqtNtorMj6vg2SyxHyC3eSGGZ4gZUeu/bjSWIUrrZLN53/2D
 Jk0ay1Db5AOIrWyFUZeJT9x0GwX35RwtDHpy+AN/kvafXRCB/eMfkXmzkTmX10FZ
 Z/oBjyn8Sepqf0OaAINoj3ClXe3MeoVJk5TVHKoAuquVSL2f+E8PocOY98d8Qf6Q
 K/8+TSH9CyD93Ad1NQ6vqHz75RAsOwM4Ntir8d8ppSn795JlxvHT/isxwxDR8Lp9
 sRn8a17MG6RgWv7iPddUib8X4xtjsiv9cLwUBt5u4CNNrWTAeUc4vI81DFWK5H07
 DUaL6YofNqAhusSkdYtQfYrkpAywJsOjhFABghVCMnXbr0Gqwq0bV0vNRL5zMxZm
 kLk49eD2Zu6F3Huyr1v/6jmljVz+WvsAyTUIbvWMoW5SRDMsBoHg1gwAUKG1wKk0
 dzQhy/t3Z3RiLi2C7gLa
 =rUNA
 -----END PGP SIGNATURE-----

Merge tag 'backlight-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Add support for an enable regulator to lp855x_bl"

* tag 'backlight-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: lp855x: Add enable regulator
2016-08-01 07:32:32 -04:00
Brian Norris 6025530738 backlight: lp855x: Add enable regulator
The LP8556 datasheet describes an EN/VDDIO input, which serves "both as
a chip enable and as a power supply reference for PWM, SDA, and SCL
inputs." The LP8556 that I'm testing doesn't respond properly if I try
to talk I2C to it too quickly after enabling VDDIO, and the LP8555
datasheet mentions a t_RESPONSE delay of up to 1 millisecond.

Support this EN/VDDIO by adding a regulator property to the binding;
enabling this regulator at probe time; and sleeping for 1 to 2ms, if the
EN/VDDIO regulator was provided.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:06:21 +01:00
Stephan Linz 86ab168614 leds: documentation: 'ide-disk' to 'disk-activity'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-27 08:58:35 +02:00
Phil Reid fa4191a609 leds: pca9532: Add device tree support
This patch adds basic device tree support for the pca9532 LEDs.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-20 09:43:33 +02:00
Ezequiel Garcia 80d6737b27 leds: gpio: Support the "panic-indicator" firmware property
Calling a GPIO LEDs is quite likely to work even if the kernel
has paniced, so they are ideal to blink in this situation.
This commit adds support for the new "panic-indicator"
firmware property, allowing to mark a given LED to blink on
a kernel panic.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-05-06 10:26:07 +02:00
Ezequiel Garcia e4f4f7091e devicetree: leds: Introduce "panic-indicator" optional property
It's desirable to specify which LEDs are to be blinked on a kernel
panic. Therefore, introduce a devicetree boolean property to mark
which LEDs should be treated this way, if possible.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Rob Herring <rob@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-05-06 10:25:41 +02:00
David Rivshin e0442d7def leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
Si-En Technology was acquired by ISSI in 2011, and it appears that
the IS31FL3218/IS31FL3216 are just rebranded SN3218/SN3216 devices.

Add the "si-en,sn3218" and "si-en,sn3216" compatible strings into the
IS31FL32XX driver as aliases for the issi equivalents, and update
binding documentation.

Datasheets:
    IS31FL3218: http://www.issi.com/WW/pdf/31FL3218.pdf
    SN3218:     http://www.si-en.com/uploadpdf/s2011517171720.pdf

    IS31FL3216: http://www.issi.com/WW/pdf/31FL3216.pdf
    SN3216:     http://www.si-en.com/uploadpdf/SN3216201152410148.pdf

Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
David Rivshin 4ef31e4993 DT: leds: Add binding for the ISSI IS31FL32xx family of LED controllers
This adds a binding description for the is31fl3236/35/18/16 I2C LED
controllers.

Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:21 +01:00
Linus Torvalds 9bbd4b9f38 DeviceTree updates for 4.4:
- DT binding doc consolidation moving similar bindings to common
   locations. The majority of these are display related which were
   scattered in video/, fb/, drm/, gpu/, and panel/ directories.
 - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs
   in the tree for most arches with dts files (except powerpc for now).
 - OF_IRQ=n fixes for user enabled CONFIG_OF.
 - of_node_put ref counting fixes from Julia Lawall.
 - Common DT binding for wakeup-source and deprecation of all similar
   bindings.
 - DT binding for PXA LCD controller.
 - Allow ignoring failed PCI resource translations in order to ignore
   64-bit addresses on non-LPAE 32-bit kernels.
 - Support setting the NUMA node from DT instead of only from parent
   device.
 - Couple of earlycon DT parsing fixes for address and options.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWO+HwAAoJEPr7XbWNvGHDFOoP/RcK4z5dtVQL2XRFbJBqRBZU
 riMc4BZkwpcKGXjzZlMrLw+mg4vaoLKSIAGAsYkgdDOKbYphQQdVwDzN099Fzpzy
 EE6K7Q+AW618z34AWdDjcpJYzSFnjAjYdh6JabohmKdPlxobR1RsKT+nRpDOGfeO
 c1DmxAQ1Fiav+xAI4m0YUuyxQDUeFYC0mVcVPzRbWZj31Ia5BgIrvT+V7fM55CTb
 dOAYWDHrfOw+yYI98sqZoSAb5H+E3UuY1ymBMhiP16Ot2vCyIKRYwhDokF9VYO/0
 MpIMhCgv1jmE5NCbBeYSSJUePySvvnuyYe6HIaJQjV8KGEZ5C7c1iLMgtvov2KVI
 bcSx6nPH/u5FuWIhWdMINPc50AQBAK/akYcgoCVjioVX+4WY2pqLvsXW2arEr//Z
 XY3FUpgS6eI42HBsj4SxrGnzaRc2jPOs6yiANkywmHnpWcyvszCxUEvf0Mh0cbkm
 diu31/owdpUO5imCe+ErtGVV3vY2VUMnbcm8J61pqL52OZNPLZUUEfktv1JCGW7y
 cVdnlgeGSFuCbY4jUErvxtQGJQLFwf7Gg1U/VfFXX2iuQGAACB1KwxY5sR6P5Ghz
 W6NvOTT36kaM9WGqn/bquOd6EmKcx9aZfgRLOkgV86Q/11gHKpuRjkrsth7rIJDI
 97qkGiWl4t1Ll5T4StK8
 =tGCy
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...
2015-11-06 12:17:09 -08:00
Ingi Kim 10238adb6f leds: aat1290: Fix property naming of flash-timeout-us
flash-timeout-us property name is changed to flash-max-timeout-us.
This patch fixes that name.

Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:56 +01:00
Álvaro Fernández Rojas 1d3ff22d63 Documentation: leds: update DT bindings for leds-bcm6328
This patch adds latest DT bindings for leds-bcm6328 init register
configuration.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:46 +01:00
Simon Guinot 2976b17989 leds: netxbig: add device tree binding
This patch adds device tree support for the netxbig LEDs.

This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03 08:59:25 +01:00
Rob Herring 7755313e69 dt-bindings: move backlight bindings under leds
Backlights are generally a subtype of LEDs at least from a software
point of view if not always electrically. Move the bindings from the
video directory to underneath the leds dir.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
2015-10-22 09:21:22 -05:00
Linus Torvalds 670c039dee - Stop using LP855X Platform Data to control regulators
- Move PWM8941 WLED driver into Backlight
  - Remove invalid use of IS_ERR_VALUE() macro
  - Remove duplicate check for NULL data before unregistering
  - Export I2C Device ID structure
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6FPVAAoJEFGvii+H/Hdh1NIP/2mcBwvmF8zgmTUALbRLKyAp
 3LXx0/Nh64Pjz2rDsZPclo4NLlq43d9xq/A3CBI4b00VgiofgRG/Cihhzo8nxhTu
 XN73TgVQ2CiNrQ0yn85dedoVEbv0cAlZYdyuHrp1SUUSPOUhaiRU2w6k7BkY0gc2
 8lkzmVnMOkQjT+Elj6wVBcPiojm333Tu5wE125W8t6XDOwDfpLoVkzcxcv/V7eIo
 pStB7u3MsXZ9kmG2S9aMSZX1PS6C772OeN1I7+3lFy67qiIDj3tQ+8MyaMFvWGdQ
 /w8+f4K8k0t1m1OJVLgsT4UKR/7qprTOvEXYGrsVPPwZqSOypRZOooPOQbAVtkV6
 qYsVYEnbsJerkCuAyWETL+H5eH+P56Zl66t6a9hgnzw4wKYarufo+xUe0b+ntmoO
 dtegXgUVryY1P9teXsnnWx24r4pfaCWunO1RUXSZABCK+0qEeXa2SM/PFtkCWwEd
 AGBp8Rcv9a2BHtY2oaii+rs6WFUH+CGeZ8rt1cKBZvT2gCjlTPb5WiGvCEnN3OBi
 BCWgTLILldSRG7ERW6P6W6WkpP9u6gz8BChLNe0PsoOoNLXElHj6VCAlusOc1kHU
 6WwvMpKcQ+SVMVNouFLv3Ur5K8sF7VkyaHDRoipeKufu0n3b3+AXEaRr/Ch1BsIh
 cdUHgYJSujzcD/Zx8crp
 =URbg
 -----END PGP SIGNATURE-----

Merge tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 - Stop using LP855X Platform Data to control regulators
 - Move PWM8941 WLED driver into Backlight
 - Remove invalid use of IS_ERR_VALUE() macro
 - Remove duplicate check for NULL data before unregistering
 - Export I2C Device ID structure

* tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa: Export I2C module alias information
  backlight: lp8788_bl: Delete a check before backlight_device_unregister()
  backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro
  backlight: pm8941-wled: Move PM8941 WLED driver to backlight
  backlight: lp855x: Use private data for regulator control
2015-09-04 11:40:40 -07:00
Linus Torvalds ff474e8ca8 powerpc updates for 4.3
- Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt
  - EEH fixes for SRIOV from Gavin
  - Introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
  - Use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras
  - Seccomp filter support from Michael Ellerman
  - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar
  - Add powerpc timebase as a trace clock source from Naveen N. Rao
  - Misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
  - Add an inline function to update POWER8 HID0 from Gautham R. Shenoy
  - Fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
  - Drop support for 64K local store on 4K kernels from Michael Ellerman
  - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan
  - Initialize distance lookup table from drconf path from Nikunj A Dadhania
  - Enable RTC class support from Vaibhav Jain
  - Disable automatically blocked PCI config from Gavin Shan
  - Add LEDs driver for PowerNV platform from Vasant Hegde
  - Fix endianness issues in the HVSI driver from Laurent Dufour
  - Kexec endian fixes from Samuel Mendoza-Jonas
  - Fix corrupted pdn list from Gavin Shan
  - Fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
 
  - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
    optimizations, checksum optimizations, 85xx config fragments and updates,
    device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor
    fixes.
 
  - A ton of cxl updates & fixes:
   - Add explicit precision specifiers from Rasmus Villemoes
   - use more common format specifier from Rasmus Villemoes
   - Destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
   - Destroy afu->contexts_idr on release of an afu from Johannes Thumshirn
   - Compile with -Werror from Daniel Axtens
   - EEH support from Daniel Axtens
   - Plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
   - Add alternate MMIO error handling from Ian Munsie
   - Allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan
   - Remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
   - Release irqs if memory allocation fails from Vaibhav Jain
   - Remove racy attempt to force EEH invocation in reset from Daniel Axtens
   - Fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
   - Fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie
   - Set up and enable PSL Timebase from Philippe Bergheaud
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5+GzAAoJEFHr6jzI4aWA0iAP/jcd0kNaNBzLgcDKKygKdgz4
 xn4EWu81vfMfZYWesb0ATrjlH0hLsRxSXoFUqUMhtJTa5kNAoCIaz/M8WBALS50h
 aT+i7br4WEU2j2FcaMyP3iAZx/2hl+2utODJSHPRWPkec1fUDBfEyBf++e520RWM
 HUQGIGZXh8yq7KMA96Pwhsvls9vOB8hS2UdU/NS8ff3J5jFvXC1/WmF2qfzJBS1V
 8iHyz26Jl8+dJ+et7iC2oD5XQAjIH1oJgOyPVPBzAQttfi8RjuVzRA30TfPBAUwI
 lC9nlmPy6bCe4kiQYWVB1z7GegHyW/9vkeuMj/u8mZbqpaayMEMZmd2C3iNDXNHx
 i2NSvdln539t4qWYsV2v6lVCfa/ayDHD73Wackj5Dk394tzXnpCPhxNzc2yKEd5v
 h7vwYc9jBhsbfSCSogaM+gSHJ1APgCidggHJMYYNA2nN2u6V62RpsMB7zp/1+Q2v
 yqYdD8oYF4Dm21x/ujaNFrlizROD46WS0UqdJ3yP6HAqRYIpRXtibmpECJgt1n5h
 HjADEci4hQ2UQxdMdp/Q5KZnPTJebBtrZrmkW5r6cZBUaTB5TVkFaEWN44CT/Loh
 tMNeA3qOBN06CaQS2WL3UUUWpbZq9fSbWuUZ5lWZDb5AOyRxe5eWVYNLkiyIXozY
 L24l1bYdBhXahnjoS/kc
 =n9+X
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
   from Benjamin Herrenschmidt

 - EEH fixes for SRIOV from Gavin

 - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth

 - use hardware RNG for arch_get_random_seed_* not arch_get_random_*
   from Paul Mackerras

 - seccomp filter support from Michael Ellerman

 - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
   Salgaonkar

 - add powerpc timebase as a trace clock source from Naveen N.  Rao

 - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual

 - add an inline function to update POWER8 HID0 from Gautham R.  Shenoy

 - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman

 - drop support for 64K local store on 4K kernels from Michael Ellerman

 - move dma_get_required_mask() from pnv_phb to pci_controller_ops from
   Andrew Donnellan

 - initialize distance lookup table from drconf path from Nikunj A
   Dadhania

 - enable RTC class support from Vaibhav Jain

 - disable automatically blocked PCI config from Gavin Shan

 - add LEDs driver for PowerNV platform from Vasant Hegde

 - fix endianness issues in the HVSI driver from Laurent Dufour

 - kexec endian fixes from Samuel Mendoza-Jonas

 - fix corrupted pdn list from Gavin Shan

 - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan

 - Freescale updates from Scott: Highlights include 32-bit memcpy/memset
   optimizations, checksum optimizations, 85xx config fragments and
   updates, device tree updates, e6500 fixes for non-SMP, and misc
   cleanup and minor fixes.

 - a ton of cxl updates & fixes:
    - add explicit precision specifiers from Rasmus Villemoes
    - use more common format specifier from Rasmus Villemoes
    - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
    - destroy afu->contexts_idr on release of an afu from Johannes
      Thumshirn
    - compile with -Werror from Daniel Axtens
    - EEH support from Daniel Axtens
    - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
    - add alternate MMIO error handling from Ian Munsie
    - allow release of contexts which have been OPENED but not STARTED
      from Andrew Donnellan
    - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
    - release irqs if memory allocation fails from Vaibhav Jain
    - remove racy attempt to force EEH invocation in reset from Daniel
      Axtens
    - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
    - fix force unmapping mmaps of contexts allocated through the kernel
      api from Ian Munsie
    - set up and enable PSL Timebase from Philippe Bergheaud

* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
  cxl: Set up and enable PSL Timebase
  cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
  cxl: Fix + cleanup error paths in cxl_dev_context_init
  powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
  powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
  powerpc/pseries: Fix corrupted pdn list
  powerpc/powernv: Enable LEDS support
  powerpc/iommu: Set default DMA offset in dma_dev_setup
  cxl: Remove racy attempt to force EEH invocation in reset
  cxl: Release irqs if memory allocation fails
  cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
  powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
  powerpc/powernv: Reset HILE before kexec_sequence()
  powerpc/kexec: Reset secondary cpu endianness before kexec
  powerpc/hvsi: Fix endianness issues in the HVSI driver
  leds/powernv: Add driver for PowerNV platform
  powerpc/powernv: Create LED platform device
  powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
  powerpc/powernv: Fix the log message when disabling VF
  cxl: Allow release of contexts which have been OPENED but not STARTED
  ...
2015-09-03 16:41:38 -07:00
Vincent Donnefort f7fafd083c leds: leds-ns2: move LED modes mapping outside of the driver
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO
values to LED mode) is different from the one used on other boards
supported by the leds-ns2 driver.

With this patch the hardcoded mapping is removed from leds-ns2. Now,
it must be defined either in the platform data (if an old-fashion board
setup file is used) or in the DT node. In order to allow the later, this
patch also introduces a modes-map property for the leds-ns2 DT binding.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28 14:06:06 +02:00
Jacek Anaszewski aa14318aa0 DT: leds: Improve description of flash LEDs related properties
1. Since max-microamp property has had no users so far, then rename
   it to more descriptive led-max-microamp.
2. Since flash-timeout-us property has had no users so far, then rename
   it to more accurate flash-max-timeout-us.
3. Describe led-max-microamp property as mandatory for specific board
   configurations.
4. Make flash-max-microamp and flash-max-timeout-us properties mandatory
   for devices with configurable flash current and flash timeout settings
   respectively.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: devicetree@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-08-28 14:05:55 +02:00
Bjorn Andersson 7ddbc2423c backlight: pm8941-wled: Move PM8941 WLED driver to backlight
The Qualcomm PM8941 WLED block is used for backlight and should therefor
be in the backlight framework and not in the LED framework. This moves
the driver and adapts to the backlight api instead.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-25 08:41:56 +01:00
Vasant Hegde 84ad6e5cd3 leds/powernv: Add driver for PowerNV platform
This patch implements LED driver for PowerNV platform using the existing
generic LED class framework.

PowerNV platform has below type of LEDs:
  - System attention
      Indicates there is a problem with the system that needs attention.
  - Identify
      Helps the user locate/identify a particular FRU or resource in the
      system.
  - Fault
      Indicates there is a problem with the FRU or resource at the
      location with which the indicator is associated.

We register classdev structures for all individual LEDs detected on the
system through LED specific device tree nodes. Device tree nodes specify
what all kind of LEDs present on the same location code. It registers
LED classdev structure for each of them.

All the system LEDs can be found in the same regular path /sys/class/leds/.
We don't use LED colors. We use LED node and led-types property to form
LED classdev. Our LEDs have names in this format.

        <location_code>:<attention|identify|fault>

Any positive brightness value would turn on the LED and a zero value would
turn off the LED. The driver will return LED_FULL (255) for any turned on
LED and LED_OFF (0) for any turned off LED.

The platform level implementation of LED get and set state has been
achieved through OPAL calls. These calls are made available for the
driver by exporting from architecture specific codes.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 18:19:07 +10:00
Jacek Anaszewski 8bdc89390e DT: aat1290: Document handling external strobe sources
This patch adds documentation for a pinctrl-names property.
The property, when present, is used for switching the source
of the strobe signal for the device.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: devicetree@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-06-22 13:55:28 -07:00
Álvaro Fernández Rojas c87cc34273 leds: add DT binding for BCM6358 LED controller
This adds device tree binding documentation for the Broadcom BCM6358 LED controller.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-25 13:26:48 -07:00
Ingi Kim 84b5def48f leds: ktd2692: add device tree bindings for ktd2692
This patch adds the device tree bindings for ktd2692 flash LEDs.
Add Optional properties of child node for Flash LED

Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-25 13:26:44 -07:00
Álvaro Fernández Rojas 6e4b55e842 leds: add DT binding for BCM6328 LED controller
This adds device tree binding documentation for the Broadcom BCM6328 LED controller.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-04 11:22:28 -07:00
Jacek Anaszewski 2269fe0931 DT: Add documentation for the Skyworks AAT1290
This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: devicetree@vger.kernel.org
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-04 11:20:29 -07:00
Andrew Lunn e0d4ffc367 leds: tlc591xx: Document binding for the TI 8/16 Channel i2c LED driver
Document the binding for the TLC591xx LED driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Imre Kaloz <kaloz@openwrt.org>
Cc: Matthew.Fatheree@belkin.com
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-05-04 11:05:54 -07:00
Jacek Anaszewski 116b8e1641 DT: leds: Add uniqueness requirement for 'label' property.
Label is used for naming LED class devices. Since ePAPR
doesn't require uniqueness for label properties, it has to be
explicitly required in the LEDs common bindings documentation.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: devicetree@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-03-30 11:55:50 -07:00