Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- make fbcon a built-time depency for fbdev (fbcon was tristate option
before, now it is a bool) - this is a first step in preparations for
making console_lock usage saner (currently it acts like the BKL for
all things fbdev/fbcon) (Daniel Vetter)
- add fbcon=margin:<color> command line option to select the fbcon margin
color (David Lechner)
- add DMI quirk table for x86 systems which need fbcon rotation (devices
like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891)
(Hans de Goede)
- fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS EV3)
(David Lechner)
- enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek)
- fix use after free in the error path of udlfb driver (Anton Vasilyev)
- fix error return code handling in pxa3xx_gcu driver (Gustavo A. R. Silva)
- fix bootparams.screeninfo arguments checking in vgacon (Jan H. Schönherr)
- do not leak uninitialized padding in clk to userspace in the debug code of
atyfb driver (Vladis Dronov)
- fix compiler warnings in fbcon code and matroxfb driver (Arnd Bergmann)
- convert fbdev susbsytem to using %pOF instead of full_name (Rob Herring)
- structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A. R.
Silva, Julia Lawall)
- misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori
Morimoto, Lynn Lei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ApgP
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.14' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
- make fbcon a built-time depency for fbdev (fbcon was tristate option
before, now it is a bool) - this is a first step in preparations for
making console_lock usage saner (currently it acts like the BKL for
all things fbdev/fbcon) (Daniel Vetter)
- add fbcon=margin:<color> command line option to select the fbcon
margin color (David Lechner)
- add DMI quirk table for x86 systems which need fbcon rotation
(devices like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works
TW891) (Hans de Goede)
- fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS
EV3) (David Lechner)
- enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek)
- fix use after free in the error path of udlfb driver (Anton Vasilyev)
- fix error return code handling in pxa3xx_gcu driver (Gustavo A. R.
Silva)
- fix bootparams.screeninfo arguments checking in vgacon (Jan H.
Schönherr)
- do not leak uninitialized padding in clk to userspace in the debug
code of atyfb driver (Vladis Dronov)
- fix compiler warnings in fbcon code and matroxfb driver (Arnd
Bergmann)
- convert fbdev susbsytem to using %pOF instead of full_name (Rob
Herring)
- structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A.
R. Silva, Julia Lawall)
- misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori
Morimoto, Lynn Lei)
* tag 'fbdev-v4.14' of git://github.com/bzolnier/linux: (75 commits)
video/console: Update BIOS dates list for GPD win console rotation DMI quirk
video/console: Add rotated LCD-panel DMI quirk for the VIOS LTH17
video: fbdev: sis: fix duplicated code for different branches
video: fbdev: make fb_var_screeninfo const
video: fbdev: aty: do not leak uninitialized padding in clk to userspace
vgacon: Prevent faulty bootparams.screeninfo from causing harm
video: fbdev: make fb_videomode const
video/console: Add new BIOS date for GPD pocket to dmi quirk table
fbcon: remove restriction on margin color
video: ARM CLCD: constify amba_id
video: fm2fb: constify zorro_device_id
video: fbdev: annotate fb_fix_screeninfo with const and __initconst
omapfb: constify omap_video_timings structures
video: fbdev: udlfb: Fix use after free on dlfb_usb_probe error path
fbdev: i810: make fb_ops const
fbdev: matrox: make fb_ops const
video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe()
video: fbdev: Enable Xilinx FB for ZynqMP
video: fbdev: Fix multiple style issues in xilinxfb
video: fbdev: udlfb: constify usb_device_id.
...
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
- New Device Support
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
- New Functionality
- Amend API to provide register layout; atmel-smc
- Fix-ups
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
- Bug Fixes
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll
-----BEGIN PGP SIGNATURE-----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=TKIm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
New Device Support:
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
New Functionality:
- Amend API to provide register layout; atmel-smc
Fix-ups:
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
Bug Fixes:
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll"
* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
dt-bindings: mfd: Add bindings for ZII RAVE devices
mfd: omap-usb-tll: Fix register offsets
mfd: da9052: Constify spi_device_id
mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
mfd: da9055: Constify i2c_device_id
mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
mfd: t7l66xb: Handle return value of clk_prepare_enable
mfd: Add ROHM BD9571MWV-M PMIC DT bindings
mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
mfd: lp87565: Convert to use devm_mfd_add_devices()
mfd: Add support for TPS68470 device
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
mfd: syscon: atmel-smc: Add helper to retrieve register layout
mfd: axp20x: Use correct platform device ID for many PEK
dt-bindings: mfd: axp20x: Introduce bindings for AXP813
mfd: axp20x: Add support for AXP813 PMIC
dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
mfd: Add ROHM BD9571MWV-M MFD PMIC driver
...
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Transparently fall back to other poweroff method(s) if EFI poweroff
fails (and returns)
- Use separate PE/COFF section headers for the RX and RW parts of the
ARM stub loader so that the firmware can use strict mapping
permissions
- Add support for requesting the firmware to wipe RAM at warm reboot
- Increase the size of the random seed obtained from UEFI so CRNG
fast init can complete earlier
- Update the EFI framebuffer address if it points to a BAR that gets
moved by the PCI resource allocation code
- Enable "reset attack mitigation" of TPM environments: this is
enabled if the kernel is configured with
CONFIG_RESET_ATTACK_MITIGATION=y.
- Clang related fixes
- Misc cleanups, constification, refactoring, etc"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/bgrt: Use efi_mem_type()
efi: Move efi_mem_type() to common code
efi/reboot: Make function pointer orig_pm_power_off static
efi/random: Increase size of firmware supplied randomness
efi/libstub: Enable reset attack mitigation
firmware/efi/esrt: Constify attribute_group structures
firmware/efi: Constify attribute_group structures
firmware/dcdbas: Constify attribute_group structures
arm/efi: Split zImage code and data into separate PE/COFF sections
arm/efi: Replace open coded constants with symbolic ones
arm/efi: Remove pointless dummy .reloc section
arm/efi: Remove forbidden values from the PE/COFF header
drivers/fbdev/efifb: Allow BAR to be moved instead of claiming it
efi/reboot: Fall back to original power-off method if EFI_RESET_SHUTDOWN returns
efi/arm/arm64: Add missing assignment of efi.config_table
efi/libstub/arm64: Set -fpie when building the EFI stub
efi/libstub/arm64: Force 'hidden' visibility for section markers
efi/libstub/arm64: Use hidden attribute for struct screen_info reference
efi/arm: Don't mark ACPI reclaim memory as MEMBLOCK_NOMAP
Recently produced GPD win devices have a new BIOS, research into the
changes in this BIOS has found a ChangeLog which also lists 2 previously
unknown BIOS dates.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
Here is the "big" driver core update for 4.14-rc1.
It's really not all that big, the largest thing here being some firmware
tests to help ensure that that crazy api is working properly.
There's also a new uevent for when a driver is bound or unbound from a
device, fixing a hole in the driver model that's been there since the
very beginning. Many thanks to Dmitry for being persistent and pointing
out how wrong I was about this all along :)
Patches for the new uevents are already in the systemd tree, if people
want to play around with them.
Otherwise just a number of other small api changes and updates here,
nothing major. All of these patches have been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1/IQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn8jACfdQg+YXGxTExonxnyiWgoDMMSO2gAn1ETOaak
itLO5ll4b6EQ0r3pU27d
=pCYl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here is the "big" driver core update for 4.14-rc1.
It's really not all that big, the largest thing here being some
firmware tests to help ensure that that crazy api is working properly.
There's also a new uevent for when a driver is bound or unbound from a
device, fixing a hole in the driver model that's been there since the
very beginning. Many thanks to Dmitry for being persistent and
pointing out how wrong I was about this all along :)
Patches for the new uevents are already in the systemd tree, if people
want to play around with them.
Otherwise just a number of other small api changes and updates here,
nothing major. All of these patches have been in linux-next for a
while with no reported issues"
* tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
driver core: bus: Fix a potential double free
Do not disable driver and bus shutdown hook when class shutdown hook is set.
base: topology: constify attribute_group structures.
base: Convert to using %pOF instead of full_name
kernfs: Clarify lockdep name for kn->count
fbdev: uvesafb: remove DRIVER_ATTR() usage
xen: xen-pciback: remove DRIVER_ATTR() usage
driver core: Document struct device:dma_ops
mod_devicetable: Remove excess description from structured comment
test_firmware: add batched firmware tests
firmware: enable a debug print for batched requests
firmware: define pr_fmt
firmware: send -EINTR on signal abort on fallback mechanism
test_firmware: add test case for SIGCHLD on sync fallback
initcall_debug: add deferred probe times
Input: axp20x-pek - switch to using devm_device_add_group()
Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01
Input: gpio_keys - use devm_device_add_group() for attributes
driver core: add devm_device_add_group() and friends
driver core: add device_{add|remove}_group() helpers
...
Pull parisc updates from Helge Deller:
"Major changes include:
- Full support of the firmware Page Deallocation Table with
MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
regularily for new bad memory pages.
- Full support for self-extracting kernel.
- Added UBSAN support.
- Lots of section mismatch fixes across all parisc drivers.
- Added examples for %pF and %pS usage in printk-formats.txt"
* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
printk-formats.txt: Add examples for %pF and %pS usage
parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
parisc/core: Fix section mismatches
parisc/ipmi_si_intf: Fix section mismatches on parisc platform
parisc/input/hilkbd: Fix section mismatches
parisc/net/lasi_82596: Fix section mismatches
parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
parisc: Fix section mismatches in parisc core drivers
parisc/parport_gsc: Fix section mismatches
parisc/scsi/lasi700: Fix section mismatches
parisc/scsi/zalon: Fix section mismatches
parisc/8250_gsc: Fix section mismatches
parisc/mux: Fix section mismatches
parisc/sticore: Fix section mismatches
parisc/harmony: Fix section mismatches
parisc: Wire up support for self-extracting kernel
parisc: Make existing core files reuseable for bootloader
parisc: Add core code for self-extracting kernel
parisc: Enable UBSAN support
parisc/random: Add machine specific randomness
...
The VIOS LTH17 Cherry Trail bases netbook has its LCD panel mounted
rotated 90 degrees, add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Drake <drake@endlessm.com>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Pull x86 mm changes from Ingo Molnar:
"PCID support, 5-level paging support, Secure Memory Encryption support
The main changes in this cycle are support for three new, complex
hardware features of x86 CPUs:
- Add 5-level paging support, which is a new hardware feature on
upcoming Intel CPUs allowing up to 128 PB of virtual address space
and 4 PB of physical RAM space - a 512-fold increase over the old
limits. (Supercomputers of the future forecasting hurricanes on an
ever warming planet can certainly make good use of more RAM.)
Many of the necessary changes went upstream in previous cycles,
v4.14 is the first kernel that can enable 5-level paging.
This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
default.
(By Kirill A. Shutemov)
- Add 'encrypted memory' support, which is a new hardware feature on
upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
RAM to be encrypted and decrypted (mostly) transparently by the
CPU, with a little help from the kernel to transition to/from
encrypted RAM. Such RAM should be more secure against various
attacks like RAM access via the memory bus and should make the
radio signature of memory bus traffic harder to intercept (and
decrypt) as well.
This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
by default.
(By Tom Lendacky)
- Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
hardware feature that attaches an address space tag to TLB entries
and thus allows to skip TLB flushing in many cases, even if we
switch mm's.
(By Andy Lutomirski)
All three of these features were in the works for a long time, and
it's coincidence of the three independent development paths that they
are all enabled in v4.14 at once"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
x86/mm: Use pr_cont() in dump_pagetable()
x86/mm: Fix SME encryption stack ptr handling
kvm/x86: Avoid clearing the C-bit in rsvd_bits()
x86/CPU: Align CR3 defines
x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
acpi, x86/mm: Remove encryption mask from ACPI page protection type
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
x86/mm: Allow userspace have mappings above 47-bit
x86/mm: Prepare to expose larger address space to userspace
x86/mpx: Do not allow MPX if we have mappings above 47-bit
x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
x86/mm/dump_pagetables: Fix printout of p4d level
x86/mm/dump_pagetables: Generalize address normalization
x86/boot: Fix memremap() related build failure
...
Refactor code in order to avoid identical code for different branches.
This issue was detected with the help of Coccinelle.
Addresses-Coverity-ID: 1226761
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make these const as they are not modified anywhere.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
'clk' is copied to a userland with padding byte(s) after 'vclk_post_div'
field unitialized, leaking data from the stack. Fix this ensuring all of
'clk' is initialized to zero.
References: https://github.com/torvalds/linux/pull/441
Reported-by: sohu0106 <sohu0106@126.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
If a zero for the number of colums or rows manages to slip through,
gotoxy() will underflow vc->vc_pos, causing the next action on the
referenced memory to end with a page fault.
Make the check in vgacon_startup() more pessimistic to prevent that.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make these const as they are only passed to a const argument of the
function fb_find_mode.
Done using Coccinelle.
@match disable optional_qualifier@
identifier s;
@@
static struct fb_videomode s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
identifier match.s;
expression list[5] es;
position ref.p;
@@
fb_find_mode(es,&s@p,...)
@bad depends on !good1@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct fb_videomode s;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
GPD has released a new BIOS for the pocket, update the dmi data
accordingly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This removes the restriction on the value range of the fbcon=margin:
parameter. The color value really depends on the driver being used.
Signed-off-by: David Lechner <david@lechnology.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
zorro_device_id are not supposed to change at runtime. All functions
working with zorro_device_id provided by <linux/zorro.h> work with
const zorro_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make these const as they are only used during a copy operation.
Some structures are used as a copy operation inside __init functions, so
make them const and replace __initdata with __initconst to avoid section
conflict error.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It's better to be explicit and use the DRIVER_ATTR_RW() macro when
defining a driver's sysfs file. Bonus is this fixes up a checkpatch.pl
warning.
This is part of a series to drop DRIVER_ATTR() from the tree entirely.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These omap_video_timings structures are only copied into other
structures, so they can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
If dlfb_usb_probe drops to error path then there is only one
kref_init() call and no kref_get(), so second kref_put() leads to
use after free.
The patch removes superfluous kref_put on dlfb_usb_probe error path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make the structure const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make fb_ops const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
platform_get_irq() returns an error code, but the pxa3xx_gcu driver
ignores it and always returns -ENODEV. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Also, notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
All reported by from checkpatch
./scripts/checkpatch.pl --max-line-length 120 -strict -f
drivers/video/fbdev/xilinxfb.c
WARNING: Block comments should align the * on each line
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: please, no space before tabs
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
WARNING: Missing a blank line after declarations
WARNING: struct of_device_id should normally be const
CHECK: Please don't use multiple blank lines
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Alignment should match open parenthesis
CHECK: 'Endianess' may be misspelled - perhaps 'Endianness'?
CHECK: spaces preferred around that '*' (ctx:VxV)
ERROR: that open brace { should be on the previous line
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
On UEFI systems, the firmware may expose a Graphics Output Protocol (GOP)
instance to which the efifb driver attempts to attach in order to provide
a minimal, unaccelerated framebuffer. The GOP protocol itself is not very
sophisticated, and only describes the offset and size of the framebuffer
in memory, and the pixel format.
If the GOP framebuffer is provided by a PCI device, it will have been
configured and enabled by the UEFI firmware, and the GOP protocol will
simply point into a live BAR region. However, the GOP protocol itself does
not describe this relation, and so we have to take care not to reconfigure
the BAR without taking efifb's dependency on it into account.
Commit:
55d728a40d ("efi/fb: Avoid reconfiguration of BAR that covers the framebuffer")
attempted to do so by claiming the BAR resource early on, which prevents the
PCI resource allocation routines from changing it. However, it turns out
that this only works if the PCI device is not behind any bridges, since
the bridge resources need to be claimed first.
So instead, allow the BAR to be moved, but make the efifb driver deal
with that gracefully. So record the resource that covers the BAR early
on, and if it turns out to have moved by the time we probe the efifb
driver, update the framebuffer address accordingly.
While this is less likely to occur on x86, given that the firmware's
PCI resource allocation is more likely to be preserved, this is a
worthwhile sanity check to have in place, and so let's remove the
preprocessor conditional that makes it !X86 only.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Peter Jones <pjones@redhat.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vt8623_timing_regs is only passed as the first argument to
svga_check_timings and as the second argument to svga_set_timings,
both of which are const. So make vt8623_timing_regs const also.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file or
device_{remove/create}_bin_file. The corresponding arguments are of
type const, so declare the structures to be const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Make const xilinx_fb_default_pdata structure that is only copied into
other structure.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>,
[b.zolnierkie: split from a bigger patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This adds a new command line option to select the fbcon margin color.
The motivation for this is screens where black does not blend into the
physical surroundings of the screen. For example, using an LCD (not the
backlit kind), white text on a black background is hard to read, so
inverting the colors is preferred. However, when you do this, most of the
screen is filled with white but the margins are still filled with black.
This makes a big, black, backwards 'L' on the screen. By setting
fbcon=margin:7, the margins will be filled with white and the LCD looks as
expected.
Signed-off-by: David Lechner <david@lechnology.com>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This check is needed in the case where the width of the framebuffer
is not a multiple of 8 pixels. For example, LEGO MINDSTORMS EV3 has
a 178x128 1bpp display.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Some x86 clamshell design devices use portrait tablet screens and a
display engine which cannot rotate in hardware, so we need to rotate
the fbcon to compensate.
This commit adds a DMI based quirk table which is initially populated with
4 such devices: The Asus T100HA, GPD Pocket, the GPD win and the I.T.Works
TW891, so that the console comes up in the right orientation on these
devices OOTB.
Unfortunately these (cheap) devices also typically have quite generic DMI
data, so we match on a combination of DMI data, screen resolution and a
list of known BIOS dates to avoid false positives.
Suggested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The option to invert the output of the GPIO (active low) is
not used by the only platform still using platform data to
set up a GPIO backlight (one SH board). Delete the option
as we do not expect to expand the use of board files for
this driver, and GPIO descriptors intrinsically keep track
of any signal inversion.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver is predominantly used by device tree systems, all
of which can deal with modern GPIO descriptors. The legacy
GPIO API is only used by one SH board so make the GPIO
descriptor the default way to deal with it.
As an intended side effect we do not need to look around in
the device tree for the inversion flag since the GPIO
descriptors will intrinsically deal with this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The variable has become unused in modular configurations
which triggers a harmless warning:
drivers/video/fbdev/matrox/matroxfb_base.c:1583:12: error: 'hotplug' defined but not used [-Werror=unused-variable]
This moves it into an #ifdef section of the file, matching
all its references.
Fixes: 376b3ff54c ("fbdev: Nuke FBINFO_MODULE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Greg Kroah-Hartman