UDF does not have separate preallocated table of inodes. So similarly to
XFS we pretend that every free block is also a free inode in statfs(2)
output. Clarify this in a comment.
Signed-off-by: Jan Kara <jack@suse.cz>
UDF 2.60 standard states in section 2.2.14.2:
A partition with Access Type 3 (rewritable) shall define a Freed
Space Bitmap or a Freed Space Table, see 2.3.3. All other partitions
shall not define a Freed Space Bitmap or a Freed Space Table.
Rewritable partitions are used on media that require some form of
preprocessing before re-writing data (for example legacy MO). Such
partitions shall use Access Type 3.
Overwritable partitions are used on media that do not require
preprocessing before overwriting data (for example: CD-RW, DVD-RW,
DVD+RW, DVD-RAM, BD-RE, HD DVD-Rewritable). Such partitions shall
use Access Type 4.
however older versions of the standard didn't have this wording and
there are tools out there that create UDF filesystems with rewritable
partitions but that don't contain a Freed Space Bitmap or a Freed Space
Table on media that does not require pre-processing before overwriting a
block. So instead of forcing media with rewritable partition read-only,
base this decision on presence of a Freed Space Bitmap or a Freed Space
Table.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Fixes: b085fbe2ef ("udf: Fix crash during mount")
Link: https://lore.kernel.org/linux-fsdevel/20200112144735.hj2emsoy4uwsouxz@pali
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we do not support writing to UDF disks with Metadata partition.
There is already check that disks with declared minimal write revision to
UDF 2.50 or higher are mounted only in R/O mode but this does not cover
situation when minimal write revision is set incorrectly (e.g. to 2.01).
Link: https://lore.kernel.org/r/20200112144959.28104-1-pali.rohar@gmail.com
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently ENTITYID_FLAGS_* macros definitions are written as hex numbers
but their meaning is not bitwise-or flags. But rather bit position. This is
unusual and could be misleading. So change meaning of ENTITYID_FLAGS_*
macros definitions to be really bitwise-or flags.
Link: https://lore.kernel.org/r/20200112221353.29711-1-pali.rohar@gmail.com
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Free space on filesystems with metadata or virtual partition maps
currently gets misreported. This is because these partitions are just
remapped onto underlying real partitions from which keep track of free
blocks. Take this remapping into account when counting free blocks as
well.
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Rename structure name and its members to match naming convention and fix
endianity type for UDFRevision member. Also remove duplicate definition of
UDF_ID_COMPLIANT which is already in osta_udf.h.
Link: https://lore.kernel.org/r/20200107212904.30471-2-pali.rohar@gmail.com
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The brelse() function tests whether its argument is NULL
and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/a254c1d1-0109-ab51-c67a-edc5c1c4b4cd@web.de
Signed-off-by: Jan Kara <jack@suse.cz>
OSTA UDF standard defines that domain identifier in logical volume
descriptor and file set descriptor should contain a particular string
and the identifier suffix contains flags possibly making media
write-protected. Verify these constraints and allow only read-only mount
if they are not met.
Tested-by: Steven J. Magnani <steve@digidescorp.com>
Reviewed-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of relying on UDFFS_DEBUG define for debug printing, just use
standard pr_debug() prints and rely on CONFIG_DYNAMIC_DEBUG
infrastructure for enabling or disabling prints.
Signed-off-by: Jan Kara <jack@suse.cz>
Windows is capable of creating UDF files having named streams.
One example is the "Zone.Identifier" stream attached automatically
to files downloaded from a network. See:
https://msdn.microsoft.com/en-us/library/dn392609.aspx
Modification of a file having one or more named streams in Linux causes
the stream directory to become detached from the file, essentially leaking
all blocks pertaining to the file's streams.
Fix by saving off information about an inode's streams when reading it,
for later use when its on-disk data is updated.
Link: https://lore.kernel.org/r/20190814125002.10869-1-steve@digidescorp.com
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Some UDF creators (specifically Microsoft, but perhaps others) mishandle
the ECMA-167 corner case that requires descriptors within a Volume
Recognition Sequence to be placed at 4096-byte intervals on media where
the block size is 4K. Instead, the descriptors are placed at the 2048-
byte interval mandated for media with smaller blocks. This nonconformity
currently prevents Linux from recognizing the filesystem as UDF.
Modify the driver to tolerate a misformatted VRS on 4K media.
[JK: Simplified descriptor checking]
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Tested-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/20190711133852.16887-2-steve@digidescorp.com
Signed-off-by: Jan Kara <jack@suse.cz>
Extract code that parses a Volume Recognition Sequence descriptor
(component), in preparation for calling it twice against different
locations in a block.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/20190711133852.16887-1-steve@digidescorp.com
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlzZljwACgkQnJ2qBz9k
QNmZ3wf/fMe6rMOFCHE7RT/Nuq+H9G7EVjk+Cch8+EFXPRxDLgQUE03LZ5VzpZw0
U4SsGFqLO/pGwtGPDRe789hQNqjmCjdEA86wJrUy6UCobeUkHrXU1XL6XnmvKKGP
UvAFBIz2F0GWCcm4yWlbW25yLf/aFI8t/50/sahfgj+6v9Tezfs3FGVJEta7D/KH
PNLDx2zMS+aiQJfjo81bEqS/87b4so8ioudFlyMOlwLQslvtR7SzvmvXHxG7VpGY
pI6dTnXqOjykWWAYDc5J2/D9drbA1QxcanuoRW0Eg9TYPCc8MQVakbQ203GyAPxP
rEHq6aKi0Fp1vyzKh/Zoa5O7TsgReg==
=cOTS
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem updates from Jan Kara:
"A couple of small bugfixes and cleanups for quota, udf, ext2, and
reiserfs"
* tag 'fs_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: check time limit when back out space/inode change
fs/quota: erase unused but set variable warning
quota: fix wrong indentation
udf: fix an uninitialized read bug and remove dead code
fs/reiserfs/journal.c: Make remove_journal_hash static
quota: remove trailing whitespaces
quota: code cleanup for __dquot_alloc_space()
ext2: Adjust the comment of function ext2_alloc_branch
udf: Explain handling of load_nls() failure
Add comment explaining that load_nls() failure gets handled back in
udf_fill_super() to avoid false impression that it is unhandled.
Signed-off-by: Jan Kara <jack@suse.cz>
The check if (bh) in udf_sync_fs() is pointless as we cannot have
sbi->s_lvid_dirty and !sbi->s_lvid_bh (as already asserted by
udf_updated_lvid()). So just drop the pointless check.
Reviewed-by: Steven J. Magnani <steve@digidescorp.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Refuse to mount a volume read-write without a coherent Logical Volume
Integrity Descriptor, because we can't generate truly unique IDs without
one.
This fixes a bug where all inodes created on a UDF filesystem following
mount without a coherent LVID are assigned unique ID 0 which can then
confuse other UDF implementations.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Make sure the CRC and tag checksum of the Logical Volume Integrity
Descriptor are valid before the structure is written out to disk.
Otherwise, unless the filesystem is unmounted gracefully, the on-disk
LVID will be invalid - which is unnecessary filesystem damage.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Centralize timestamping and CRC/checksum updating of the in-core
Logical Volume Integrity Descriptor, in preparation for adding
a third site where this functionality is needed.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit c26f6c6157 ("udf: Fix conversion of 'dstring' fields to UTF8")
started to be more strict when checking whether converted strings are
properly formatted. Sudip reports that there are DVDs where the volume
identification string is actually too long - UDF reports:
[ 632.309320] UDF-fs: incorrect dstring lengths (32/32)
during mount and fails the mount. This is mostly harmless failure as we
don't need volume identification (and even less volume set
identification) for anything. So just truncate the volume identification
string if it is too long and replace it with 'Invalid' if we just cannot
convert it for other reasons. This keeps slightly incorrect media still
mountable.
CC: stable@vger.kernel.org
Fixes: c26f6c6157 ("udf: Fix conversion of 'dstring' fields to UTF8")
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We don't support Free Space Table and Free Space Bitmap as specified by
UDF standard for writing as we don't support erasing blocks before
overwriting them. Just drop the handling of these structures as
partition descriptor checking code already makes sure such filesystems
can be mounted only read-only.
Signed-off-by: Jan Kara <jack@suse.cz>
Fix a crash during an attempt to mount a filesystem that has both
Unallocated Space Table and Unallocated Space Bitmap. Such filesystem
actually violates the UDF standard so we just have to properly detect
such situation and refuse to mount such filesystem read-write. When we
are at it, verify also other constraints on the allocation information
mandated by the standard.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There are certain filesystem features which we support for reading but
not for writing. We properly refuse to mount such filesystems read-write
however for some features (such as read-only partitions), we don't check
for these features when remounting the filesystem from read-only to
read-write. Thus such filesystems could be remounted read-write leading
to strange behavior (most likely crashes).
Fix the problem by marking in superblock whether the filesystem has some
features that are supported in read-only mode and check this flag during
remount.
Signed-off-by: Jan Kara <jack@suse.cz>
Win7 is creating UDF filesystems with single partition with number 8192.
Current partition descriptor scanning code does not handle this well as
it incorrectly assumes that partition numbers will form mostly contiguous
space of small numbers. This results in unmountable media due to errors
like:
UDF-fs: error (device dm-1): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
UDF-fs: warning (device dm-1): udf_fill_super: No fileset found
Fix the problem by handling partition descriptors in a way that sparse
partition numbering does not matter.
Reported-and-tested-by: jean-luc malet <jeanluc.malet@gmail.com>
CC: stable@vger.kernel.org
Fixes: 7b78fd02fb
Signed-off-by: Jan Kara <jack@suse.cz>
The VFS structures are finally converted to always use 64-bit timestamps,
and this file system can represent a long range of on-disk timestamps
already, so now let's fit in the missing bits for udf.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Subsequent patches in the series convert inode timestamps
to use struct timespec64 instead of struct timespec as
part of solving the y2038 problem.
commit fd3cfad374 ("udf: Convert udf_disk_stamp_to_time() to use mktime64()")
eliminated the NULL return condition from udf_disk_stamp_to_time().
udf_time_to_disk_time() is always called with a valid dest pointer and
the return value is ignored.
Further, caller can as well check the dest pointer being passed in rather
than return argument.
Make both the functions return void.
This will make the inode timestamp conversion simpler.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: jack@suse.com
----
Changes from v1:
* fixed the pointer error pointed by Jan
iocharset= mount option specifies the character set used on *console*
(not on disk). So even dstrings from VRS need to be converted from CS0
to the specified charset and not always UTF-8. This is barely user
visible as those strings are shown only in UDF debug messages.
CC: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
UDF needs to convert strings between OSTA CS0 charset and standard UTF8.
Currently we implement our own utf-16 <-> utf-8 translations which is
unnecessary code duplication. Always select NLS so that we can use
translation functions from there.
Signed-off-by: Jan Kara <jack@suse.cz>
When specifiying iocharset multiple times in a mount or once/multiple in
a remount, current option parsing may cause inaccurate refcount of nls
module. Also, in the failure cleanup of option parsing, the condition
of calling unload_nls is not sufficient.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If logical volume integrity descriptor contains non-closed integrity
type when mounting the volume, there are high chances that the volume is
not consistent (device was detached before the filesystem was
unmounted). Don't touch integrity type of such volume so that fsck can
recognize it and check such filesystem.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently when UDF filesystem is recorded without uid / gid (ids are set
to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid=
and gid= mount options. In such case filesystem could not be modified in
any way as VFS refuses to modify files with invalid ids (even by root).
This is confusing to users and not very useful default since such media
mode is generally used for removable media. Use overflow[ug]id instead
so that at least root can modify the filesystem.
Reported-by: Steve Kenton <skenton@ou.edu>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently uid=ignore and gid=ignore make no sense without uid=<number>
and gid=<number> respectively as they result in all files having invalid
uid / gid which then doesn't allow even root to modify files and thus
causes confusion. And since commit ca76d2d803 "UDF: fix UID and GID
mount option ignorance" (from over 10 years ago) uid=<number> overrides
all uids on disk as uid=ignore does. So just silently ignore uid=ignore
mount option.
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Current handling of Partition Descriptors in Volume Descriptor Sequence
is buggy in several ways. Firstly, it does not take descriptor sequence
numbers into account at all, thus any volume making serious use of them
would be unmountable. Secondly, it does not handle Volume Descriptor
Pointers or Volume Descriptor Sequence without Terminating Descriptor.
Fix these problems by properly remembering all Partition Descriptors in
the Volume Descriptor Sequence and their sequence numbers. This is made
more complicated by the fact that we don't know number of partitions in
advance and sequence numbers have to be tracked on per-partition basis.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When scanning Volume Descriptor Sequence, several descriptors have
exactly the same handling. Unify it.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Convert index definitions from defines to enum. It is a shorter
description and easier to modify. Also remove VDS_POS_VOL_DESC_PTR since
it is unused.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
According to ECMA-167 3/8.4.2 a volume descriptor sequence can be
terminated also by an unrecorded block within the extent of volume
descriptor sequence. Currently we errored out in such case making such
volumes unmountable. Handle that case by treating any invalid block as a
block terminating the sequence.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
According to ECMA-167 3/8.4.2 Volume Descriptor Pointer is terminating
current extent of Volume Descriptor Sequence. Also according to ECMA-167
3/8.4.3 Volume Descriptor Sequence Number is not significant for Volume
Descriptor Pointers. Simplify the handling of Volume Descriptor Pointers
to take this into account.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We pass one block beyond end of volume descriptor sequence into
process_sequence() as 'lastblock' instead of the last block of the
sequence. When the sequence is not terminated with TD descriptor, this
could lead to false errors due to invalid blocks in volume descriptor
sequence and thus unmountable volumes.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix problems noted in compilion with -Wformat=2 -Wformat-signedness.
In particular, a mismatch between the signedness of a value and the
signedness of its format specifier can result in unsigned values being
printed as negative numbers, e.g.:
Partition (0 type 1511) starts at physical 460, block length -1779968542
...which occurs when mounting a large (> 1 TiB) UDF partition.
Changes since V1:
* Fixed additional issues noted in udf_bitmap_free_blocks(),
udf_get_fileident(), udf_show_options()
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Large (> 1 TiB) UDF filesystems appear subject to several problems when
mounted on 64-bit systems:
* readdir() can fail on a directory containing File Identifiers residing
above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO.
* FIBMAP on a file block located above 0x7FFFFFFF can return a negative
value. The low 32 bits are correct, but applications that don't mask the
high 32 bits of the result can perform incorrectly.
Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation
of UDF block addresses. Ultimately, all driver functions that manipulate
UDF block addresses should use this type; for now, deployment is limited
to functions with actual or potential sign extension issues.
Changes to udf_readdir() and udf_block_map() address the issues noted
above; other changes address potential similar issues uncovered during
audit of the driver code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Omit an extra message for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Replace the specification of data structures by variable references
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara