This changes kvmppc_get_last_inst() so that the instruction it fetches
is returned in a ppc_inst_t variable rather than a u32. This will
allow us to return a 64-bit prefixed instruction on those 64-bit
machines that implement Power ISA v3.1 or later, such as POWER10.
On 32-bit platforms, ppc_inst_t is 32 bits wide, and is turned back
into a u32 by ppc_inst_val, which is an identity operation on those
platforms.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgsiPlL9O7KnlZZ@cleo
Pass the hypervisor (H)SRR1[PREFIX] indication through to synchronous
interrupts injected into the guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-3-npiggin@gmail.com
The prefix architecture in ISA v3.1 introduces a prefixed bit in SRR1
for many types of synchronous interrupts which is set when the interrupt
is caused by a prefixed instruction.
This requires KVM to be able to set this bit when injecting interrupts
into a guest. Plumb through the SRR1 "flags" argument to the core_queue
APIs where it's missing for this. For now they are set to 0, which is
no change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup kvmppc_core_queue_alignment() in booke.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-2-npiggin@gmail.com
Fix various W=1 warnings in booke.c:
arch/powerpc/kvm/booke.c:1008:5: error: no previous prototype for ‘kvmppc_handle_exit’ [-Werror=missing-prototypes]
1008 | int kvmppc_handle_exit(struct kvm_vcpu *vcpu, unsigned int exit_nr)
| ^~~~~~~~~~~~~~~~~~
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'vcpu' not described in 'kvmppc_handle_exit'
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'exit_nr' not described in 'kvmppc_handle_exit'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202304020827.3LEZ86WB-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230403045314.3095410-1-mpe@ellerman.id.au
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y).
- Fix oops when a PF_IO_WORKER thread tries to core dump.
- Don't try to reconfigure VAS when it's disabled.
Thanks to: Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=1Sli
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)
- Fix oops when a PF_IO_WORKER thread tries to core dump
- Don't try to reconfigure VAS when it's disabled
Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.
* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc/64s: Fix __pte_needs_flush() false positive warning
When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.
This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144659.1541127-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org
Add lockdep annotations for the following properties that must hold:
* Any error log retrieval must be atomically coupled with the prior
RTAS call, without a window for another RTAS call to occur before the
error log can be retrieved.
* All users of the core rtas_args parameter block must hold rtas_lock.
Move the definitions of rtas_lock and rtas_args up in the file so that
__do_enter_rtas_trace() can refer to them.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-6-010e4416f13f@linux.ibm.com
The 'filter' member is a pointer, not a bool; fix the wording
accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-4-010e4416f13f@linux.ibm.com
Add documentation for rtas_call_unlocked(), including details on how
it differs from rtas_call().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-3-010e4416f13f@linux.ibm.com
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
CHRP and PAPR agree: "In order to make an RTAS call, the operating
system must construct an argument call buffer aligned on an eight byte
boundary in physically contiguous real memory [...]." (7.2.7 Calling
Mechanism and Conventions).
struct rtas_args is the type used for this argument call buffer. The
unarchitected 'rets' member happens to produce 8-byte alignment for
the struct on 64-bit targets in practice. But without an alignment
directive the structure will have only 4-byte alignment on 32-bit
targets:
$ nm b/{before,after}/chrp32/vmlinux | grep rtas_args
c096881c b rtas_args
c0968820 b rtas_args
Add an alignment directive to the struct rtas_args declaration so all
instances have the alignment required by the specs. rtas-types.h no
longer refers to any spinlock types, so drop the spinlock_types.h
inclusion while we're here.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-1-010e4416f13f@linux.ibm.com
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'
Fixes: c4342ff92b ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes: 2b9d7467a6 ("[POWERPC] Add tsi108 pci and platform device data register function")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[mpe: Use pr_info() and unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org
Use "%pa" format specifier for resource_size_t to avoid compiler
printk format warnings.
../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'
148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'
174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
| ^~~~~~~
../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'
77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name,
| ^~~~~~~
Fixes: 028ee972f0 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes: 9c21025c78 ("powerpc: wii: hollywood interrupt controller support")
Fixes: 5a7ee3198d ("powerpc: wii: platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
Use "%pa" format specifier for resource_size_t to avoid a compiler
printk format warning.
../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
| ^~~~~~~~~ ~~~~~~~~~
| |
| resource_size_t {aka long long unsigned int}
Prevents 24 such warnings.
Fixes: 01f25c3716 ("clk: mpc512x: add backwards compat to the CCF code")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Unlike PVR_POWER8, etc ...., PVR_7450 represents a full PVR
value and not a family value.
To avoid confusion, do like E500 family and define the relevant
PVR_VER_xxxx values for the 7450 family:
0x8000 ==> 7450
0x8001 ==> 7455
0x8002 ==> 7447
0x8003 ==> 7447A
0x8004 ==> 7448
And use them to detect 7450 family for perf events.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302260657.7dM9Uwev-lkp@intel.com/
Fixes: ec3eb9d941 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/99ca1da2e5a6cf82a8abf4bc034918e500e31781.1677513277.git.christophe.leroy@csgroup.eu
This is follow up change after 14b5d59a26 ("powerpc/pseries: Fix
formatting to make code look more beautiful") to conform to kernel
coding style.
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230324220041.11378-1-arkamar@atlas.cz
Commit 21b56c8477 ("iov_iter: get rid of separate bvec and xarray
callbacks") removed the calls to memcpy_page_flushcache().
Remove the unnecessary memcpy_page_flushcache() call.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221230-kmap-x86-v1-2-15f1ecccab50@intel.com
The hypervisor supports user-mode NX from Power10.
pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS
windows for DLPAR event in shared processor mode and the kernel gets
-ENOTSUPP for HCALLs if the user-mode NX is not supported. The current
VAS implementation also supports only with Radix page tables. Whereas in
dedicated processor mode, pseries_vas_notifier() is registered only if
the copy/paste feature is enabled. So instead of displaying HCALL error
messages, update VAS capabilities if the copy/paste feature is
available.
This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu()
and returns success if the copy/paste feature is not enabled. Then
lparcfg_write() completes the processor DLPAR operations without any
failures.
Fixes: 2147783d6b ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com
struct class should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
class to be moved to read-only memory.
While we are touching all class sysfs callbacks also mark the attribute
as constant as it can not be modified. The bonding code still uses this
structure so it can not be removed from the function callbacks.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steve French <sfrench@samba.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-cifs@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230325084537.3622280-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390 can do more fine-grained handling of spurious TLB protection faults,
when there also is the PTE pointer available.
Therefore, pass on the PTE pointer to flush_tlb_fix_spurious_fault() as an
additional parameter.
This will add no functional change to other architectures, but those with
private flush_tlb_fix_spurious_fault() implementations need to be made
aware of the new parameter.
Link: https://lkml.kernel.org/r/20230306161548.661740-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On a 16-socket 192-core POWER8 system, the context_switch1_threads
benchmark from will-it-scale (see earlier changelog), upstream can achieve
a rate of about 1 million context switches per second, due to contention
on the mm refcount.
64s meets the prerequisites for CONFIG_MMU_LAZY_TLB_SHOOTDOWN, so enable
the option. This increases the above benchmark to 118 million context
switches per second.
This generates 314 additional IPI interrupts on a 144 CPU system doing a
kernel compile, which is in the noise in terms of kernel cycles.
Link: https://lkml.kernel.org/r/20230203071837.1136453-6-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting.
This makes the lazy tlb mm references more obvious, and allows the
refcounting scheme to be modified in later changes. There is no
functional change with this patch.
Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes: fa439810cc ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[mpe: Trim oops in change log, add Fixes & Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk
Userspace PROT_NONE ptes set _PAGE_PRIVILEGED, triggering a false
positive debug assertion that __pte_flags_need_flush() is not called
on a kernel mapping.
Detect when it is a userspace PROT_NONE page by checking the required
bits of PAGE_NONE are set, and none of the RWX bits are set.
pte_protnone() is insufficient here because it always returns 0 when
CONFIG_NUMA_BALANCING=n.
Fixes: b11931e9ad ("powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230302225947.81083-1-bgray@linux.ibm.com
Commit c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
changed to use bus_get_dev_root() but didn't consider that the function
can fail and return an uninitialized value of ret (hint, the function
can never fail, but the compiler doesn't know that.)
Fix this up by setting ret to -EINVAL just in case something really goes
wrong with the call to bus_get_dev_root().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303280045.4oaaezcn-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230327181606.1424846-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvmppc_hv_entry isn't called from anywhere other than
book3s_hv_rmhandlers.S itself. Remove .global scope for this function
and annotate it with SYM_CODE_START_LOCAL and SYM_CODE_END.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230327113320.3407491-1-kconsul@linux.vnet.ibm.com
After the commit 93d102f094 ("printk: remove safe buffers"),
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT is no longer useful. Remove it.
Signed-off-by: Marc Aurèle La France <tsi@tuyoix.net>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.cz: Cleaned up the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Fixes: 93d102f094 ("printk: remove safe buffers")
Link: https://lore.kernel.org/r/5c19e248-1b6b-330c-7c4c-a824688daefe@tuyoix.net
We need the USB fixes here, and the USB gadget update for future
development patches to be based on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto/algapi.h is included more than once.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
With appropriate compiler support [1], KASAN builds use __asan prefixed
meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove.
If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define
memintrinsics normally (do not prefix '__').
On powerpc, KASAN is the only user of __mem functions, which are used to
define instrumented memintrinsics. Alias the normal versions for KASAN to
use in its implementation.
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lore.kernel.org/oe-kbuild-all/202302271348.U5lvmo0S-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the split of the legacy of_mm_gpio_chip to a separate
file and a specific build configuration option, the users
must select it when needed. The PowerPC 40x code misses this,
so we have to add the select here.
Fixes: a99cc66807 ("gpiolib: split of_mm_gpio_chip out of linux/of_gpio.h")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hu Haowen <src.res@email.cn>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd
Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl
Reviewed-by: Alex Shi <alexs@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi
Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-3-mcgrof@kernel.org
The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.
However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.
Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
This driver didn't see real maintainance since several years. It has
several trivial issues (check $(scripts/checkpatch.pl -f
drivers/usb/misc/ftdi-elan.c)) and some harder ones (difficult locking,
explict kref handling, ...). Also today it's hard to find hardware to
make actually use of such a card and I suspect the driver is completely
unused.
So remove it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321150919.351947-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver got its last actual change in 2006 and is probably unused as
nowbody should use a cardbus to USB adapter any more.
If it were still used, the driver was in urgent need for maintainer
love. (Explicit kref handling, underdocumented locking, .remove() can
return errors ...)
Also the link in the (now removed) help text doesn't look actively
maintained. According to archive.org it forwarded to
http://www.copenhagen-hotel.net/ already back in 2018.
So don't waste more time on this driver and just delete it.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the mainline fixes in this branch for testing and other
subsystem changes to be based properly on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230313182918.1312597-15-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230313182918.1312597-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Liang He <windhl@126.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230313182918.1312597-13-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230313182918.1312597-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All kvm_arch_vm_ioctl() implementations now only deal with "int"
types as return values, so we can change the return type of these
functions to use "int" instead of "long".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20230208140105.655814-7-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most functions that are related to kvm_arch_vm_ioctl() already use
"int" as return type to pass error values back to the caller. Some
outlier functions use "long" instead for no good reason (they do not
really require long values here). Let's standardize on "int" here to
avoid casting the values back and forth between the two types.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208140105.655814-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-2-mcgrof@kernel.org
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
This machine matches two compatibles and sets .pci_irq_fixup
on one of them.
Split it into two machines, then the probe function can be dropped.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop references to ppc47x_probe() to fix build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
To support detection of read faults with Radix execute-only memory, the
vma_is_accessible() check in access_error() (which checks for PROT_NONE)
was replaced with a check to see if VM_READ was missing, and if so,
returns true to assert the fault was caused by a bad read.
This is incorrect, as it ignores that both VM_WRITE and VM_EXEC imply
read on powerpc, as defined in protection_map[]. This causes mappings
containing VM_WRITE or VM_EXEC without VM_READ to misreport the cause of
page faults, since the MMU is still allowing reads.
Correct this by restoring the original vma_is_accessible() check for
PROT_NONE mappings, and adding a separate check for Radix PROT_EXEC-only
mappings.
Fixes: 395cac7752 ("powerpc/mm: Support execute-only memory on the Radix MMU")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230308152702.GR19419@kitsune.suse.cz
Tested-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310050834.63105-1-ruscur@russell.cc
Use the new 'compatible' property for simple cases.
checkpatch complains about the new compatible being undocumented
but in reality nothing is new so just ignore it for the time
being.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
Most probe functions do nothing else than checking whether
the machine is compatible to a given string.
Define that string in ppc_md structure and check it directly from
probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
Commit 5017b45946 ("powerpc/64: Option to build big-endian with ELFv2
ABI") restricted the ELFv2 ABI configuration such that it can only be
selected when linking with ld.bfd, due to lack of testing with LLVM.
ld.lld can link ELFv2 kernels without any issues; in fact, it is the
only ABI that ld.lld supports, as ELFv1 is not supported in ld.lld.
As this has not seen a ton of real world testing yet, be conservative
and only allow this option to be selected with the latest stable release
of LLVM (15.x) and newer.
While in the area, remove 'default n', as it is unnecessary to specify
it explicitly since all boolean/tristate configuration symbols default
to n.
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-3-b9e2ec9da11d@kernel.org
'-mabi=elfv2' is not added to clang's invocations when
CONFIG_PPC64_ELF_ABI_V2 is enabled, resulting in the generation of elfv1
code, as evidenced by the orphan section warnings/errors:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/prom_init.o):(.opd) is being placed in '.opd'
ld.lld: error: vmlinux.a(init/main.o):(.opd) is being placed in '.opd'
ld.lld: error: vmlinux.a(init/version.o):(.opd) is being placed in '.opd'
To resolve this, add '-mabi=elfv2' to CFLAGS with clang. This uncovers
an issue in the 32-bit vDSO:
error: unknown target ABI 'elfv2'
The ELFv2 ABI cannot be used when building code for a 32-bit target. To
resolve this, just remove the '-mabi' flags from the assembler flags, as
it was only needed for preprocessing (the _CALL_ELF macro) but this was
cleaned up in commit 5b89492c03 ("powerpc: Finalise cleanup around ABI
use").
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-2-b9e2ec9da11d@kernel.org
When CONFIG_PPC64_ELF_ABI_V2 is enabled with clang through
CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2, building the powerpc boot wrapper
in 32-bit mode (i.e. with CONFIG_PPC64_BOOT_WRAPPER=n) fails with:
error: unknown target ABI 'elfv2'
The ABI cannot be changed with '-m32'; GCC silently accepts it but clang
errors out. Only provide '-mabi=elfv2' when CONFIG_PPC64_BOOT_WRAPPER is
enabled, which is the only way '-mabi=elfv2' will be useful.
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230118-ppc64-elfv2-llvm-v1-1-b9e2ec9da11d@kernel.org
The current code provokes a kernel-doc warnings:
arch/powerpc/kernel/process.c:1606: warning: This comment starts with
'/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221101015452.3216-1-liubo03@inspur.com
Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the
Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the
generic VFIO which broke POWER:
- a coherency capability check;
- blocking IOMMU domain - iommu_group_dma_owner_claimed()/...
This adds a simple iommu_ops which reports support for cache coherency
and provides a basic support for blocking domains. No other domain types
are implemented so the default domain is NULL.
Since now iommu_ops controls the group ownership, this takes it out of
VFIO.
This adds an IOMMU device into a pci_controller (=PHB) and registers it
in the IOMMU subsystem, iommu_ops is registered at this point. This
setup is done in postcore_initcall_sync.
This replaces iommu_group_add_device() with iommu_probe_device() as the
former misses necessary steps in connecting PCI devices to IOMMU
devices. This adds a comment about why explicit iommu_probe_device() is
still needed.
The previous discussion is here:
https://lore.kernel.org/r/20220707135552.3688927-1-aik@ozlabs.ru/https://lore.kernel.org/r/20220701061751.1955857-1-aik@ozlabs.ru/
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Fixes: 70693f4708 ("vfio: Set DMA ownership for VFIO devices")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com
Subsequent patches are going to add dependency/use of iommu_ops which is
initialized in subsys_initcall as well.
This moves pciobios_init() to the next initcall level.
This should not cause behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/12303156.16998521.1678123842049.JavaMail.zimbra@raptorengineeringinc.com
PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows
for PEs: control the ownership, create/set/unset a table the hardware
for dynamic DMA windows (DDW). VFIO uses the API to implement support on
POWER.
So far only PowerNV IODA2 (POWER8 and newer machines) implemented this
and other cases (POWER7 or nested KVM) did not and instead reused
existing iommu_table structs. This means 1) no DDW 2) ownership transfer
is done directly in the VFIO SPAPR TCE driver.
Soon POWER is going to get its own iommu_ops and ownership control is
going to move there. This implements spapr_tce_table_group_ops which
borrows iommu_table tables. The upside is that VFIO needs to know less
about POWER.
The new ops returns the existing table from create_table() and only
checks if the same window is already set. This is only going to work if
the default DMA window starts table_group.tce32_start and as big as
pe->table_group.tce32_size (not the case for IODA2+ PowerNV).
This changes iommu_table_group_ops::take_ownership() to return an error
if borrowing a table failed.
This should not cause any visible change in behavior for PowerNV.
pSeries was not that well tested/supported anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
The RTAS work area allocator uses code that is built by
GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the
required Kconfig symbol to fix multiple build errors.
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init':
rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc':
rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free':
rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner'
Fixes: 43033bc62d ("powerpc/pseries: add RTAS work area allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Defined CRYPTO_AES_GCM_P10 in Kconfig to support AES/GCM
stitched implementation for Power10 or later CPU.
Added a new module driver aes-gcm-p10-crypto.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This perl code is taken from the OpenSSL project and added gcm_init_htable function
used in the aes-gcm-p10-glue.c code to initialize hash table. gcm_hash_p8 is used
to hash encrypted data blocks.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code is taken from CRYPTOGAMs[1]. The following functions are used,
aes_p8_set_encrypt_key is used to generate AES round keys and aes_p8_encrypt is used
to encrypt single block.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve overall performance of AES/GCM encrypt and decrypt operations
for Power10 or later CPU.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20230310173217.3429788-8-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
module_layout manages different types of memory (text, data, rodata, etc.)
in one allocation, which is problematic for some reasons:
1. It is hard to enable CONFIG_STRICT_MODULE_RWX.
2. It is hard to use huge pages in modules (and not break strict rwx).
3. Many archs uses module_layout for arch-specific data, but it is not
obvious how these data are used (are they RO, RX, or RW?)
Improve the scenario by replacing 2 (or 3) module_layout per module with
up to 7 module_memory per module:
MOD_TEXT,
MOD_DATA,
MOD_RODATA,
MOD_RO_AFTER_INIT,
MOD_INIT_TEXT,
MOD_INIT_DATA,
MOD_INIT_RODATA,
and allocating them separately. This adds slightly more entries to
mod_tree (from up to 3 entries per module, to up to 7 entries per
module). However, this at most adds a small constant overhead to
__module_address(), which is expected to be fast.
Various archs use module_layout for different data. These data are put
into different module_memory based on their location in module_layout.
IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT;
data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc.
module_memory simplifies quite some of the module code. For example,
ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a
different allocator for the data. kernel/module/strict_rwx.c is also
much cleaner with module_memory.
Signed-off-by: Song Liu <song@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
These char PCMCIA drivers are buggy[1] and receive only minimal care. It
was concluded[2], that we should try to remove most pcmcia drivers
completely. Let's start with these char broken one.
Note that I also removed a UAPI header: include/uapi/linux/cm4000_cs.h.
I found only coccinelle tests mentioning some ioctl constants from that
file. But they are not actually used. Anyway, should someone complain,
we may reintroduce the header (or its parts).
[1] https://lore.kernel.org/all/f41c2765-80e0-48bc-b1e4-8cfd3230fd4a@www.fastmail.com/
[2] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: "Hyunwoo Kim" <imv4bel@gmail.com>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230222092302.6348-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.
There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).
Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.
This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.
Also fixes the following warning:
vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
It turns out that commit 596ff4a09b ("cpumask: re-introduce
constant-sized cpumask optimizations") exposed a number of cases of
drivers not checking the result of "cpumask_next()" and friends
correctly.
The documented correct check for "no more cpus in the cpumask" is to
check for the result being equal or larger than the number of possible
CPU ids, exactly _because_ we've always done those constant-sized
cpumask scans using a widened type before. So the return value of a
cpumask scan should be checked with
if (cpu >= nr_cpu_ids)
...
because the cpumask scan did not necessarily stop exactly *at* that
maximum CPU id.
But a few cases ended up instead using checks like
if (cpu == nr_cpumask_bits)
...
which used that internal "widened" number of bits. And that used to
work pretty much by accident (ok, in this case "by accident" is simply
because it matched the historical internal implementation of the cpumask
scanning, so it was more of a "intentionally using implementation
details rather than an accident").
But the extended constant-sized optimizations then did that internal
implementation differently, and now that code that did things wrong but
matched the old implementation no longer worked at all.
Which then causes subsequent odd problems due to using what ends up
being an invalid CPU ID.
Most of these cases require either unusual hardware or special uses to
hit, but the random.c one triggers quite easily.
All you really need is to have a sufficiently small CONFIG_NR_CPUS value
for the bit scanning optimization to be triggered, but not enough CPUs
to then actually fill that widened cpumask. At that point, the cpumask
scanning will return the NR_CPUS constant, which is _not_ the same as
nr_cpumask_bits.
This just does the mindless fix with
sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/'
to fix the incorrect uses.
The ones in the SCSI lpfc driver in particular could probably be fixed
more cleanly by just removing that repeated pattern entirely, but I am
not emptionally invested enough in that driver to care.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/
Reported-by: Vernon Yang <vernon2gm@gmail.com>
Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.
Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The CPM1 command mask is defined for use with the standard
CPM1 command register as described in the user's manual:
0 |1 3|4 7|8 11|12 14| 15|
RST| - |OPCODE|CH_NUM| - |FLG|
In the QMC extension the CPM1 command register is redefined
(QMC supplement user's manuel) with the following mapping:
0 |1 3|4 7|8 13|14| 15|
RST|QMC OPCODE| 1110|CHANNEL_NUMBER| -|FLG|
Extend the check command mask in order to support both the
standard CH_NUM field and the QMC extension CHANNEL_NUMBER
field.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217145645.1768659-5-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Drop orphaned VAS MAINTAINERS entry.
- Fix build errors with clang and KCSAN.
- Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION & recordmcount.
Thanks to: Nathan Chancellor
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmQDMKkTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLfAD/4uzHcBQUzhSIUeQfKcONRynNTAi5Wn
EwAvfEfp0amFUnakKpY+HXcL8Rt2KHzdD83O25lGaqu3MZpaVJZITrwPo/k4ufhy
8i/YTlHJjYD0GG/HC7q507n6zVXwNCGe/TT8O2Y7zpxp1hrLEAF/eRtYuF6/YTtC
h/7zLYdZ7D7KRW3+TfVjQ0wRP4CDw519nyQhnCb6R0BWJGOlpBdoKvbTqbeOzRgf
IjhaYKLBAg1ep69zhBki32e5g8MGRqJGMBsHOBoBMA3/KfPBXhgYSMdl4lf9JO48
hIVPK8vgS/Tid9u652oXwRF3t7IddTqlUMiXKZzBEIOLiDhu58oDahZ07nurAMfg
ipnb2lRqES5OrHLhFe8s7zbn4C/spCVZ/AnkW8lDQNrVcHpMUct/0FPc3K7pN7j/
cQK15Bztwguez8vWaSlNZ/1FPfVGQRHpJOvMFyUg7oiSvJNMivZFReaOKyHR3e1A
VXJ0HAAOWA2dAY0u6puD7+GsC/WW7QPOdWAfvce+9CXdjZfoGjQvoRDjc/SWnIJz
+USjEV/AxnAM+tUW7l3LjsC58wGlwMy6vP5HxinLZRpNY2NZAtxTaapzVBlQIpsP
qK1uN1likSLkxnFsyaj1ecEP8eVOWYnfr97l+QEaJF+RyUvx1xRMPLALOL+M0030
kkDPCU7MjTxSOg==
=G47E
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Drop orphaned VAS MAINTAINERS entry
- Fix build errors with clang and KCSAN
- Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together
with recordmcount
Thanks to Nathan Chancellor.
* tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Avoid dead code/data elimination when using recordmcount
powerpc/vmlinux.lds: Add .text.asan/tsan sections
powerpc: Drop orphaned VAS MAINTAINERS entry
Since commit eca70102cf ("net: dsa: felix: add support for changing
DSA master") included in kernel v6.1, the driver supports 2 CPU ports,
and they can be put in a LAG, for example (see
Documentation/networking/dsa/configuration.rst for more details).
Defining the second CPU port in the device tree should not cause any
compatibility issue, because the default CPU port was &seville_port8
before this change, and still is &seville_port8 now (the numerically
first CPU port is used by default).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.
Fixes: 5ebb747492 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although powerpc now has objtool mcount support, it's not enabled in all
configurations due to dependencies.
On those configurations, with some linkers (binutils 2.37 at least),
it's still possible to hit the dreaded "recordmcount bug", eg. errors
such as:
CC kernel/kexec_file.o
Cannot find symbol for section 10: .text.unlikely.
kernel/kexec_file.o: failed
make[1]: *** [scripts/Makefile.build:287 : kernel/kexec_file.o] Error 1
Those errors are much more prevalent when building with
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, because it places every function
in a separate section.
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is marked experimental and is not
enabled in any powerpc defconfigs or by major distros. Although it does
have at least some users on 32-bit where kernel size tends to be more
important.
Avoid the build errors by blocking CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
when the build is using recordmcount, rather than objtool. In practice
that means for 64-bit big endian builds, or 64-bit clang builds - both
because they lack CONFIG_MPROFILE_KERNEL.
On 32-bit objtool is always used, so
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is still available there.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230221130331.2714199-1-mpe@ellerman.id.au
When KASAN/KCSAN are enabled clang generates .text.asan/tsan sections.
Because they are not mentioned in the linker script warnings are
generated, and when orphan handling is set to error that becomes a build
error, eg:
ld.lld: error: vmlinux.a(init/main.o):(.text.tsan.module_ctor) is
being placed in '.text.tsan.module_ctor' ld.lld: error:
vmlinux.a(init/version.o):(.text.tsan.module_ctor) is being placed in
'.text.tsan.module_ctor'
Fix it by adding the sections to our linker script, similar to the
generic change made in 848378812e ("vmlinux.lds.h: Handle clang's
module.{c,d}tor sections").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222060037.2897169-1-mpe@ellerman.id.au
- Change V=1 option to print both short log and full command log.
- Allow V=1 and V=2 to be combined as V=12.
- Make W=1 detect wrong .gitignore files.
- Tree-wide cleanups for unused command line arguments passed to Clang.
- Stop using -Qunused-arguments with Clang.
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag.
- Create Debian and RPM source packages without cleaning the source tree.
- Various cleanups for packaging.
-----BEGIN PGP SIGNATURE-----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=HpFZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
- Support for configuring secure boot with user-defined keys on PowerVM LPARs.
- Simplify the replay of soft-masked IRQs by making it non-recursive.
- Add support for KCSAN on 64-bit Book3S.
- Improvements to the API & code which interacts with RTAS (pseries firmware).
- Change 32-bit powermac to assign PCI bus numbers per domain by default.
- Some improvements to the 32-bit BPF JIT.
- Various other small features and fixes.
Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe
Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict
Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers,
Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin,
Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy,
Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy.
-----BEGIN PGP SIGNATURE-----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=ECNb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
plpks_is_available() can be called on any platform via kexec but calls
_plpks_get_config() which makes a hcall, which will only work on pseries.
Fix this by returning early in plpks_is_available() if hcalls aren't
possible.
Fixes: 119da30d03 ("powerpc/pseries: Expose PLPKS config values, support additional fields")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222021708.146257-1-ruscur@russell.cc
Due to CPLD firmware bugs, set CPLD syscon-reboot priority level to 64
(between rstcr and watchdog) to ensure that rstcr's global-utilities reset
method which is preferred stay as default one, and to ensure that CPLD
syscon-reboot is more preferred than watchdog reset method.
Fixes: 0531a4abd1 ("powerpc: dts: turris1x.dts: Add CPLD reboot node")
Depends-on: e6333293f2 ("power: reset: syscon-reboot: Add support for specifying priority")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230220080435.4237-1-pali@kernel.org
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
Only three minor changes: a cross-platform series from Mike Rapoport to
consolidate asm/agp.h between architectures, and a correctness change
for __generic_cmpxchg_local() from Matt Evans.
-----BEGIN PGP SIGNATURE-----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=3646
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"Only three minor changes: a cross-platform series from Mike Rapoport
to consolidate asm/agp.h between architectures, and a correctness
change for __generic_cmpxchg_local() from Matt Evans"
* tag 'asm-generic-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
char/agp: introduce asm-generic/agp.h
char/agp: consolidate {alloc,free}_gatt_pages()
locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value
As usual, this branch contains all the patches to enable options
for newly added device drivers in the 32-bit and 64-bit defconfig
files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown
to add a 'virtconfig' target for arm64, which is for the moment
the same as the 'defconfig' target but disables all the top-level
SoC specific options in order to have a smaller and faster
kernel build.
-----BEGIN PGP SIGNATURE-----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=48oI
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
- Prevent fallthrough to hash TLB flush when using radix.
Thanks to: Benjamin Gray, "Erhard F.".
-----BEGIN PGP SIGNATURE-----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=RpCo
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Prevent fallthrough to hash TLB flush when using radix
Thanks to Benjamin Gray and Erhard Furtner.
* tag 'powerpc-6.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Prevent fallthrough to hash TLB flush when using radix
objtool throws the following warning:
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x6128:
unannotated intra-function call
Fix the warning by annotating start_initialization_book3s symbol with the
SYM_FUNC_START_LOCAL and SYM_FUNC_END macros.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Fixes: 58f24eea52 ("powerpc/64s: Refactor initialisation after prom")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217043226.1020041-1-sv@linux.ibm.com
Jan-Benedict reported issue with building ppc64e_defconfig
with mainline GCC work:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -Wa,-me500 -Wa,-me500mc -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
...
make[1]: *** [arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/gettimeofday-64.o] Error 1
make: *** [arch/powerpc/Makefile:387: vdso_prepare] Error 2
This is due to assembler being called with -me500mc which is
a 32 bits target.
The problem comes from the fact that CONFIG_PPC_E500MC is selected for
both the e500mc (32 bits) and the e5500 (64 bits), and therefore the
following makefile rule is wrong:
cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc)
Today we have CONFIG_TARGET_CPU which provides the identification of the
expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds
the correct CPU option to assembler, no need to add it explicitly.
With that change (And also commit 45f7091aac ("powerpc/64: Set default
CPU in Kconfig")), it now is:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -mcpu=e500mc64 -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
[mpe: Retain -Wa,-mpower4 -Wa,-many for Book3S 64 builds for now]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/758ad54128fa9dd2fdedc4c511592111cbded900.1671475543.git.christophe.leroy@csgroup.eu
In the fix reconnecting hash__tlb_flush() to tlb_flush() the
void return on radix__tlb_flush() was not restored and subsequently
falls through to the restored hash__tlb_flush().
Guard hash__tlb_flush() under an else to prevent this.
Fixes: 1665c027af ("powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()")
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217011434.115554-1-bgray@linux.ibm.com
Clang warns:
arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~~~
arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~
Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend
is always initialized to silence the warnings. That will also simplify
the 'else' path. Clang is getting confused with these warnings, but the
warnings is a false-positive.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
When using the LLVM integrated assembler (llvm-as), the book3e build
fails with:
arch/powerpc/mm/nohash/tlb_low_64e.S:354:2: error: invalid instruction
tlbilxva 0,%r15
^
tlbilxva is an extended mnemonic for tlbilx, but llvm-as also doesn't
support tlbilx, despite it being an e500mc instruction.
Fix it by using the existing PPC_TLBILX_VA macro. The resulting binary
is identical when building with binutils.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230216112915.1681631-1-mpe@ellerman.id.au
With bintils >= 2.38 the ppc64_book3e_allmodconfig build fails:
{standard input}: Assembler messages:
{standard input}:196: Error: unrecognized opcode: `lbarx'
{standard input}:196: Error: unrecognized opcode: `stbcx.'
make[5]: *** [scripts/Makefile.build:252: arch/powerpc/mm/nohash/e500_hugetlbpage.o] Error 1
That happens because the default CPU for that config is e5500, set via
CONFIG_TARGET_CPU, and so the assembler is building for e5500, which
doesn't support those instructions.
Fix it by using machine directives to tell the assembler to assemble the
relevant code for e6500, which does support lbarx/stbcx.
That is safe because the code already has the CPU_FTR_SMT check, which
ensures the lbarx sequence doesn't run on e5500, which doesn't support
SMT.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230213112322.998003-1-mpe@ellerman.id.au
When a user updates a variable through the PLPKS secvar interface, we take
the first 8 bytes of the data written to the update attribute to pass
through to the H_PKS_SIGNED_UPDATE hcall as flags. These bytes are always
written in big-endian format.
Currently, the flags bytes are memcpy()ed into a u64, which is then loaded
into a register to pass as part of the hcall. This means that on LE
systems, the bytes are in the wrong order.
Use be64_to_cpup() instead, to ensure the flags bytes are byteswapped if
necessary.
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: ccadf154cb ("powerpc/pseries: Implement secvars for dynamic secure boot")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230216070903.355091-1-ajd@linux.ibm.com
Print the FDT error description along with the error message if failed
to set the "linux,drconf-usable-memory" property in the kdump kernel's
FDT.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216122708.182154-1-sourabhjain@linux.ibm.com
machine_is() can't provide correct results before probe_machine() has
run. Warn when it's used too early in boot, placing the WARN_ON() in a
helper function so the reported file:line indicates exactly what went
wrong.
checkpatch complains about __attribute__((weak)) in the patch, so
change that to __weak, and align the line continuations as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210-warn-on-machine-is-before-probe-machine-v2-1-b57f8243c51c@linux.ibm.com
When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.
However, after upstream commit 38ddc01147 ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.
Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.
Without the change
EEH: Beginning: 'error_detected(permanent failure)'
PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
EEH: Finished:'error_detected(permanent failure)'
With the change
EEH: Beginning: 'error_detected(permanent failure)'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Finished:'error_detected(permanent failure)'
To fix the issue, set channel state to permanent failure after
notifying the drivers.
Fixes: 38ddc01147 ("powerpc/eeh: Make permanently failed devices non-actionable")
Suggested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230209105649.127707-1-ganeshgr@linux.ibm.com
There are several architectures that duplicate definitions of
map_page_into_agp(), unmap_page_from_agp() and flush_agp_cache().
Define those in asm-generic/agp.h and use it instead of duplicated
per-architecture headers.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a copy of alloc_gatt_pages() and free_gatt_pages in several
architectures in arch/$ARCH/include/asm/agp.h. All the copies do exactly
the same: alias alloc_gatt_pages() to __get_free_pages(GFP_KERNEL) and
alias free_gatt_pages() to free_pages().
Define alloc_gatt_pages() and free_gatt_pages() in drivers/char/agp/agp.h
and drop per-architecture definitions.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.
Most conversions are trivial, but a few are worth describing in more
detail:
* Error injection token comparisons for lockdown purposes are
consolidated into a simple predicate: token_is_restricted_errinjct().
* A couple of special cases in block_rtas_call() do not use
rtas_token() but perform string comparisons against names in the
function table. These are converted to compare against token values
instead, which is logically equivalent but less expensive.
* The lookup for the ibm,os-term token can be deferred until needed,
instead of caching it at boot to avoid device tree traversal during
panic.
* Since rtas_function_token() accesses a read-only data structure
without taking any locks, xmon's lookup of set-indicator can be
performed as needed instead of cached at startup.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com
Users of rtas_token() supply a string argument that can't be validated
at build time. A typo or misspelling has to be caught by inspection or
by observing wrong behavior at runtime.
Since the core RTAS code now has consolidated the names of all
possible RTAS functions and mapped them to their tokens, token lookup
can be implemented using symbolic constants to index a static array.
So introduce rtas_function_token(), a replacement API which does that,
along with a rtas_service_present()-equivalent helper,
rtas_function_implemented(). Callers supply an opaque predefined
function handle which is used internally to index the function
table. Typos or other inappropriate arguments yield build errors, and
the function handle is a type that can't be easily confused with RTAS
tokens or other integer types.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-19-26929c8cce78@linux.ibm.com
Convert the TLB block invalidate characteristics discovery to the new
papr_sysparm API. This occurs too early in boot to use
papr_sysparm_buf_alloc(), so use a static buffer.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-18-26929c8cce78@linux.ibm.com
The new papr_sysparm API handles the details of system parameter
retrieval. Use that instead of open-coding the RTAS call, work area
management, and retries.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-17-26929c8cce78@linux.ibm.com
/proc/powerpc/lparcfg derives the LPAR name and SPLPAR characteristics
it reports using bare calls to the RTAS ibm,get-system-parameter
function. Convert these to the higher-level papr_sysparm API, which
handles the tedious details.
While the SPLPAR string parsing code could stand to be updated, that
should be done in a separate change. It is minimally modified here to
reduce the risk of changing behavior.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-16-26929c8cce78@linux.ibm.com
Introduce a set of APIs for retrieving and updating PAPR system
parameters. This encapsulates the toil of temporary RTAS work area
management, RTAS function call retries, and translation of RTAS call
statuses to conventional error values.
There are several places in the kernel that already retrieve system
parameters by calling the RTAS ibm,get-system-parameter function
directly. These will be converted to papr_sysparm_get() in changes to
follow.
As for updating system parameters, current practice is to use
sys_rtas() from user space; there are no in-kernel users of the RTAS
ibm,set-system-parameter function. However this will become deprecated
in time because it is not compatible with lockdown.
The papr_sysparm_* APIs will form the common basis for in-kernel
and user space access to system parameters. The code to expose the
set/get capabilities to user space will follow.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-14-26929c8cce78@linux.ibm.com
Various pseries-specific RTAS functions take a temporary "work area"
parameter - a buffer in memory accessible to RTAS. Typically such
functions are passed the statically allocated rtas_data_buf buffer as
the argument. This buffer is protected by a global spinlock. So users
of rtas_data_buf cannot perform sleeping operations while accessing
the buffer.
Most RTAS functions that have a work area parameter can return a
status (-2/990x) that indicates that the caller should retry. Before
retrying, the caller may need to reschedule or sleep (see
rtas_busy_delay() for details). This combination of factors
leads to uncomfortable constructions like this:
do {
spin_lock(&rtas_data_buf_lock);
rc = rtas_call(token, __pa(rtas_data_buf, ...);
if (rc == 0) {
/* parse or copy out rtas_data_buf contents */
}
spin_unlock(&rtas_data_buf_lock);
} while (rtas_busy_delay(rc));
Another unfortunately common way of handling this is for callers to
blithely ignore the possibility of a -2/990x status and hope for the
best.
If users were allowed to perform blocking operations while owning a
work area, the programming model would become less tedious and
error-prone. Users could schedule away, sleep, or perform other
blocking operations without having to release and re-acquire
resources.
We could continue to use a single work area buffer, and convert
rtas_data_buf_lock to a mutex. But that would impose an unnecessarily
coarse serialization on all users. As awkward as the current design
is, it prevents longer running operations that need to repeatedly use
rtas_data_buf from blocking the progress of others.
There are more considerations. One is that while 4KB is fine for all
current in-kernel uses, some RTAS calls can take much smaller buffers,
and some (VPD, platform dumps) would likely benefit from larger
ones. Another is that at least one RTAS function (ibm,get-vpd)
has *two* work area parameters. And finally, we should expect the
number of work area users in the kernel to increase over time as we
introduce lockdown-compatible ABIs to replace less safe use cases
based on sys_rtas/librtas.
So a special-purpose allocator for RTAS work area buffers seems worth
trying.
Properties:
* The backing memory for the allocator is reserved early in boot in
order to satisfy RTAS addressing requirements, and then managed with
genalloc.
* Allocations can block, but they never fail (mempool-like).
* Prioritizes first-come, first-serve fairness over throughput.
* Early boot allocations before the allocator has been initialized are
served via an internal static buffer.
Intended to replace rtas_data_buf. New code that needs RTAS work area
buffers should prefer this API.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-12-26929c8cce78@linux.ibm.com
Decompose the RTAS entry C code into tracing and non-tracing variants,
calling the just-added tracepoints in the tracing-enabled path. Skip
tracing in contexts known to be unsafe (real mode, CPU offline).
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-11-26929c8cce78@linux.ibm.com
Add two sets of tracepoints to be used around RTAS entry:
* rtas_input/rtas_output, which emit the function name, its inputs,
the returned status, and any other outputs. These produce an API-level
record of OS<->RTAS activity.
* rtas_ll_entry/rtas_ll_exit, which are lower-level and emit the
entire contents of the parameter block (aka rtas_args) on entry and
exit. Likely useful only for debugging.
With uses of these tracepoints in do_enter_rtas() to be added in the
following patch, examples of get-time-of-day and event-scan functions
as rendered by trace-cmd (with some multi-line formatting manually
imposed on the rtas_ll_* entries to avoid extremely long lines in the
commit message):
cat-36800 [059] 4978.518303: rtas_input: get-time-of-day arguments:
cat-36800 [059] 4978.518306: rtas_ll_entry: token=3 nargs=0 nret=8
params: [0]=0x00000000 [1]=0x00000000 [2]=0x00000000 [3]=0x00000000
[4]=0x00000000 [5]=0x00000000 [6]=0x00000000 [7]=0x00000000
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
cat-36800 [059] 4978.518366: rtas_ll_exit: token=3 nargs=0 nret=8
params: [0]=0x00000000 [1]=0x000007e6 [2]=0x0000000b [3]=0x00000001
[4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
cat-36800 [059] 4978.518366: rtas_output: get-time-of-day status: 0, other outputs: 2022 11 1 0 14 8 772648000
kworker/39:1-336 [039] 4982.731623: rtas_input: event-scan arguments: 4294967295 0 80484920 2048
kworker/39:1-336 [039] 4982.731626: rtas_ll_entry: token=6 nargs=4 nret=1
params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800
[4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
kworker/39:1-336 [039] 4982.731676: rtas_ll_exit: token=6 nargs=4 nret=1
params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800
[4]=0x00000001 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
kworker/39:1-336 [039] 4982.731677: rtas_output: event-scan status: 1, other outputs:
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-10-26929c8cce78@linux.ibm.com
Make do_enter_rtas() take a pointer to struct rtas_args and do the
__pa() conversion in one place instead of leaving it to callers. This
also makes it possible to introduce enter/exit tracepoints that access
the rtas_args struct fields.
There's no apparent reason to force inlining of do_enter_rtas()
either, and it seems to bloat the code a bit. Let the compiler decide.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-9-26929c8cce78@linux.ibm.com
The core RTAS support code and its clients perform two types of lookup
for RTAS firmware function information.
First, mapping a known function name to a token. The typical use case
invokes rtas_token() to retrieve the token value to pass to
rtas_call(). rtas_token() relies on of_get_property(), which performs
a linear search of the /rtas node's property list under a lock with
IRQs disabled.
Second, and less common: given a token value, looking up some
information about the function. The primary example is the sys_rtas
filter path, which linearly scans a small table to match the token to
a rtas_filter struct. Another use case to come is RTAS entry/exit
tracepoints, which will require efficient lookup of function names
from token values. Currently there is no general API for this.
We need something much like the existing rtas_filters table, but more
general and organized to facilitate efficient lookups.
Introduce:
* A new rtas_function type, aggregating function name, token,
and filter. Other function characteristics could be added in the
future.
* An array of rtas_function, where each element corresponds to a known
RTAS function. All information in the table is static save the token
values, which are derived from the device tree at boot. The array is
sorted by function name to allow binary search.
* A named constant for each known RTAS function, used to index the
function array. These also will be used in a client-facing API to be
added later.
* An xarray that maps valid tokens to rtas_function objects.
Fold the existing rtas_filter table into the new rtas_function array,
with the appropriate adjustments to block_rtas_call(). Remove
now-redundant fields from struct rtas_filter. Preserve the function of
the CONFIG_CPU_BIG_ENDIAN guard in the current filter table by
introducing a per-function flag that is set for the function entries
related to pseries LPAR migration. These have never had working users
via sys_rtas on ppc64le; see commit de0f7349a0 ("powerpc/rtas:
prevent suspend-related sys_rtas use on LE").
Convert rtas_token() to use a lockless binary search on the function
table. Fall back to the old behavior for lookups against names that
are not known to be RTAS functions, but issue a warning. rtas_token()
is for function names; it is not a general facility for accessing
arbitrary properties of the /rtas node. All known misuses of
rtas_token() have been converted to more appropriate of_ APIs in
preceding changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-8-26929c8cce78@linux.ibm.com
The pseries platform has been LPAR-only for several generations, and
the PAPR spec:
* Guarantees that timebase synchronization is performed by
the platform ("The timebase registers are synchronized by the
platform before CPUs are given to the OS" - 7.3.8 SMP Support).
* Completely omits the RTAS freeze-time-base and thaw-time-base RTAS
functions, which are CHRP artifacts.
This code is effectively unused on currently supported models, so drop
it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-7-26929c8cce78@linux.ibm.com
Some RTAS functions that have work area parameters impose alignment
requirements on the work area passed to them by the OS. Examples
include:
- ibm,configure-connector
- ibm,update-nodes
- ibm,update-properties
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit 033ef338b6 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-6-26929c8cce78@linux.ibm.com
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pSeries_cmo_feature_init() ignores this, making it possible to fail to
detect cooperative memory overcommit capabilities during boot.
Move the RTAS call into a conventional rtas_busy_delay()-based
loop, dropping unnecessary clearing of rtas_data_buf.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-5-26929c8cce78@linux.ibm.com
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
lparcfg's parse_system_parameter_string() ignores this, making it
possible to intermittently report incorrect SPLPAR characteristics.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-4-26929c8cce78@linux.ibm.com
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pseries_lpar_read_hblkrm_characteristics() ignores this, making it
possible to incorrectly detect TLB block invalidation characteristics
at boot.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 1211ee61b4 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-3-26929c8cce78@linux.ibm.com
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again. read_24x7_sys_info()
ignores this, allowing transient failures in reporting processor
module information.
Move the RTAS call into a coventional rtas_busy_delay()-based loop,
along with the parsing of results on success.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 8ba2142673 ("powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-2-26929c8cce78@linux.ibm.com
Some code that runs early in boot calls RTAS functions that can return
-2 or 990x statuses, which mean the caller should retry. An example is
pSeries_cmo_feature_init(), which invokes ibm,get-system-parameter but
treats these benign statuses as errors instead of retrying.
pSeries_cmo_feature_init() and similar code should be made to retry
until they succeed or receive a real error, using the usual pattern:
do {
rc = rtas_call(token, etc...);
} while (rtas_busy_delay(rc));
But rtas_busy_delay() will perform a timed sleep on any 990x
status. This isn't safe so early in boot, before the CPU scheduler and
timer subsystem have initialized.
The -2 RTAS status is much more likely to occur during single-threaded
boot than 990x in practice, at least on PowerVM. This is because -2
usually means that RTAS made progress but exhausted its self-imposed
timeslice, while 990x is associated with concurrent requests from the
OS causing internal contention. Regardless, according to the language
in PAPR, the OS should be prepared to handle either type of status at
any time.
Add a fallback path to rtas_busy_delay() to handle this as safely as
possible, performing a small delay on 990x. Include a counter to
detect retry loops that aren't making progress and bail out. Add __ref
to rtas_busy_delay() since it now conditionally calls an __init
function.
This was found by inspection and I'm not aware of any real
failures. However, the implementation of rtas_busy_delay() before
commit 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
was not susceptible to this problem, so let's treat this as a
regression.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 38f7b7067d ("powerpc/rtas: rtas_busy_delay() improvements")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-1-26929c8cce78@linux.ibm.com
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
This only works with the kexec_file_load() syscall, not the older
kexec_load() syscall, however if you're using Secure Boot then you want
to be using kexec_file_load() anyway.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
Add helper function to get the PLPKS password length. This will be used
in a later patch to support passing the password between kernels over
kexec.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-23-ajd@linux.ibm.com
When the H_PKS_GEN_PASSWORD hcall returns H_IN_USE, operations that require
authentication (i.e. anything other than reading a world-readable variable)
will not work.
The current error message doesn't explain this clearly enough. Reword it
to emphasise that authenticated operations will fail.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-22-ajd@linux.ibm.com
It seems a bit unnecessary for the PLPKS code to have a user-visible
config option when it doesn't do anything on its own, and there's existing
options for enabling Secure Boot-related features.
It should be enabled by PPC_SECURE_BOOT, which will eventually be what
uses PLPKS to populate keyrings.
However, we can't get of the separate option completely, because it will
also be used for SED Opal purposes.
Change PSERIES_PLPKS into a hidden option, which is selected by
PPC_SECURE_BOOT.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-21-ajd@linux.ibm.com
Currently, plpks_read_var() allocates a buffer to pass to the
H_PKS_READ_OBJECT hcall, then allocates another buffer into which the data
is copied, and returns that buffer to the caller.
This is a bit over the top - while we probably still want to allocate a
separate buffer to pass to the hypervisor in the hcall, we can let the
caller allocate the final buffer and specify the size.
Don't allocate var->data in plpks_read_var(), instead expect the caller to
allocate it. If the caller needs to discover the size, it can set
var->data to NULL and var->datalen will be populated. Update header file
to document this.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-20-ajd@linux.ibm.com
The plpks code converts hypervisor return codes into their Linux
equivalents so that users can understand them. Having access to the
original return codes is really useful for debugging, so add a
pr_debug() so we don't lose information from the conversion.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-19-ajd@linux.ibm.com
The Platform Keystore provides a signed update interface which can be used
to create, replace or append to certain variables in the PKS in a secure
fashion, with the hypervisor requiring that the update be signed using the
Platform Key.
Implement an interface to the H_PKS_SIGNED_UPDATE hcall in the plpks
driver to allow signed updates to PKS objects.
(The plpks driver doesn't need to do any cryptography or otherwise handle
the actual signed variable contents - that will be handled by userspace
tooling.)
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[ajd: split patch, add timeout handling and misc cleanups]
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-18-ajd@linux.ibm.com
The plpks driver uses the H_PKS_GET_CONFIG hcall to retrieve configuration
and status information about the PKS from the hypervisor.
Update _plpks_get_config() to handle some additional fields. Add getter
functions to allow the PKS configuration information to be accessed from
other files. Validate that the values we're getting comply with the spec.
While we're here, move the config struct in _plpks_get_config() off the
stack - it's getting large and we also need to make sure it doesn't cross
a page boundary.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[ajd: split patch, extend to support additional v3 API fields, minor fixes]
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-17-ajd@linux.ibm.com
Move the constants defined in plpks.c to plpks.h, and standardise their
naming, so that PLPKS consumers can make use of them later on.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-16-ajd@linux.ibm.com
Move plpks.h from platforms/pseries/ to include/asm/. This is necessary
for later patches to make use of the PLPKS from code in other subsystems.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-15-ajd@linux.ibm.com
If attempting to read the size or data attributes of a non-existent
variable (which will be possible after a later patch to expose the PLPKS
via the secvar interface), don't spam the kernel log with error messages.
Only print errors for return codes that aren't ENOENT.
Reported-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-14-ajd@linux.ibm.com
Due to sysfs constraints, when writing to a variable, we can only handle
writes of up to PAGE_SIZE.
It's possible that the maximum object size is larger than PAGE_SIZE, in
which case, print a warning on boot so that the user is aware.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-13-ajd@linux.ibm.com
Currently, the list of variables is populated by calling
secvar_ops->get_next() repeatedly, which is explicitly modelled on the
OPAL API (including the keylen parameter).
For the upcoming PLPKS backend, we have a static list of variable names.
It is messy to fit that into get_next(), so instead, let the backend put
a NULL-terminated array of variable names into secvar_ops->var_names,
which will be used if get_next() is undefined.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-12-ajd@linux.ibm.com
The forthcoming pseries consumer of the secvar API wants to expose a
number of config variables. Allowing secvar implementations to provide
their own sysfs attributes makes it easy for consumers to expose what
they need to.
This is not being used by the OPAL secvar implementation at present, and
the config directory will not be created if no attributes are set.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-11-ajd@linux.ibm.com
Remove unnecessary prefixes from error messages in secvar_sysfs_init()
(the file defines pr_fmt, so putting "secvar:" in every message is
unnecessary). Make capitalisation and punctuation more consistent.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-10-ajd@linux.ibm.com
Currently the max object size is handled in the core secvar code with an
entirely OPAL-specific implementation, so create a new max_size() op and
move the existing implementation into the powernv platform. Should be
no functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-9-ajd@linux.ibm.com
The code that handles the format string in secvar-sysfs.c is entirely
OPAL specific, so create a new "format" op in secvar_operations to make
the secvar code more generic. No functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-8-ajd@linux.ibm.com
The secvar format string and object size sysfs files are both ASCII
text, and should use sysfs_emit(). No functional change.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-7-ajd@linux.ibm.com
The secvar code only supports one consumer at a time.
Multiple consumers aren't possible at this point in time, but we'd want
it to be obvious if it ever could happen.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-6-ajd@linux.ibm.com
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-5-ajd@linux.ibm.com
secvar_ops->get_next() returns -ENOENT when there are no more variables
to return, which is expected behaviour.
Fix this by returning 0 if get_next() returns -ENOENT.
This fixes an issue introduced in commit bd5d9c743d ("powerpc: expose
secure variables to userspace via sysfs"), but the return code of
secvar_sysfs_load() was never checked so this issue never mattered.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-4-ajd@linux.ibm.com
A number of structures and buffers passed to PKS hcalls have alignment
requirements, which could on occasion cause problems:
- Authorisation structures must be 16-byte aligned and must not cross a
page boundary
- Label structures must not cross page boundaries
- Password output buffers must not cross page boundaries
To ensure correct alignment, we adjust the allocation size of each of
these structures/buffers to be the closest power of 2 that is at least the
size of the structure/buffer (since kmalloc() guarantees that an
allocation of a power of 2 size will be aligned to at least that size).
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-3-ajd@linux.ibm.com
plpks_confirm_object_flushed() uses the H_PKS_CONFIRM_OBJECT_FLUSHED hcall
to check whether changes to an object in the Platform KeyStore have been
flushed to non-volatile storage.
The hcall returns two output values, the return code and the flush status.
plpks_confirm_object_flushed() polls the hcall until either the flush
status has updated, the return code is an error, or a timeout has been
exceeded.
While we're still polling, the hcall is returning H_SUCCESS (0) as the
return code. In the timeout case, this means that upon exiting the polling
loop, rc is 0, and therefore 0 is returned to the user.
Handle the timeout case separately and return ETIMEDOUT if triggered.
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Tested-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-2-ajd@linux.ibm.com
Commit fdacae8a84 ("powerpc: Activate CONFIG_STRICT_KERNEL_RWX by
default") causes ps3_hpte_updateboltedpp() to be called.
The correct fix would be to implement updateboltedpp() for PS3, but it's
not clear if that's possible. As a stop-gap, change the panic statment
in ps3_hpte_updateboltedpp() to a pr_info statement so that bootup can
continue.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2df879d982809c05b0dfade57942fe03dbe9e7de.1672767868.git.geoff@infradead.org
Enable HAVE_ARCH_KCSAN for 64-bit Book3S, permitting use of the kernel
concurrency sanitiser through the CONFIG_KCSAN_* kconfig options. KCSAN
requires compiler builtins __atomic_* 64-bit values, and so only report
support on 64-bit.
See documentation in Documentation/dev-tools/kcsan.rst for more
information.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Limit to Book3S to avoid build failure on Book3E]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-6-rmclure@linux.ibm.com
Instrumented memory accesses provided by KCSAN will access core-local
memories (which will save and restore IRQs) as well as restoring IRQs
directly. Avoid recursive instrumentation by applying __no_kcsan
annotation to IRQ restore routines.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Resolve merge conflict with IRQ replay recursion changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-5-rmclure@linux.ibm.com
Annotate memory barriers *mb() with calls to kcsan_mb(), signaling to
compilers supporting KCSAN that the respective memory barrier has been
issued. Rename memory barrier *mb() to __*mb() to opt in for
asm-generic/barrier.h to generate the respective *mb() macro.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-4-rmclure@linux.ibm.com
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
Stack validation in early boot can just bail out of checking alternate
stacks if they are not validated yet. Checking against a NULL stack
could cause NULLish pointer values to be considered valid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-5-npiggin@gmail.com
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.
smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().
This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.
Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix SMP=n build as reported by sfr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com
The stress_hpt memblock allocation did not pass in an alignment,
which causes a stack dump in early boot (that I missed, oops).
Fixes: 6b34a099fa ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-2-npiggin@gmail.com
As the earlier comment explains, __secondary_hold_spinloop does not have
to be accessed at its virtual address, slightly simplifying code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-4-npiggin@gmail.com
Move some basic Book3S initialisation after prom to a function similar
to what Book3E looks like. Book3E returns from this function at the
virtual address mapping, and Book3S will do the same in a later change,
so making them look similar helps with that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-3-npiggin@gmail.com
Replace open-coded toc-relative address calculation with helper macros,
commit dab3b8f4fd ("powerpc/64: asm use consistent global variable
declaration and access") made similar conversions already but missed
this one.
This allows data addressing model to be changed more easily.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-2-npiggin@gmail.com
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
[ ] pci_bus 0002:02: Configuring PE for bus
[ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[ ] BUG: Kernel NULL pointer dereference on write at 0x00000000
[ ] Faulting instruction address: 0xc00000000005eac4
[ ] Oops: Kernel access of bad area, sig: 7 [#1]
[ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ ] Modules linked in:
[ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2
[ ] NIP: c00000000005eac4 LR: c00000000005ea44 CTR: 0000000030061b9c
[ ] REGS: c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1)
[ ] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000224 XER: 20040000
[ ] CFAR: c00000000005eaa0 DAR: 0000000000000000 DSISR: 02080000 IRQMASK: 0
[ ] GPR00: c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960
[ ] GPR04: 00000000000000fc 0000000000000003 0000000000000000 0000000000000000
[ ] GPR08: 0000000000000000 0000000000000000 0000000000000000 9000000000001033
[ ] GPR12: 0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000
[ ] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ ] GPR20: 0000000000000000 0000000000000000 0000000000000000 c00000000711e200
[ ] GPR24: 0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff
[ ] GPR28: c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000
[ ] NIP [c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0
[ ] LR [c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0
[ ] Call Trace:
[ ] [c0002000073838e0] [c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable)
[ ] [c000200007383970] [c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970
[ ] [c000200007383a60] [c000000000032cdc] pcibios_bus_add_device+0x78/0x18c
[ ] [c000200007383aa0] [c00000000028f2bc] pci_bus_add_device+0x28/0xbc
[ ] [c000200007383b10] [c00000000028f3a0] pci_bus_add_devices+0x50/0x7c
[ ] [c000200007383b50] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383b90] [c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [c000200007383bd0] [c00000000069ad0c] pcibios_init+0xf0/0x104
[ ] [c000200007383c50] [c0000000000106d8] do_one_initcall+0x84/0x1c4
[ ] [c000200007383d20] [c0000000006910b8] kernel_init_freeable+0x264/0x268
[ ] [c000200007383dc0] [c000000000010a68] kernel_init+0x18/0x138
[ ] [c000200007383e20] [c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80
[ ] Instruction dump:
[ ] 7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120
[ ] 7ba91764 38a00003 57a7043e 38c00000 <7c8a492e> 5484043e e87e0018 4bff23bd
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
Reported-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: 23e79425fe ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230120093215.19496-1-fbarrat@linux.ibm.com
cputime_t is no longer a type, so VIRT_CPU_ACCOUNTING_GEN does not
have any affect on the type for 32-bit architectures, so there is
no reason it can't be supported.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-4-npiggin@gmail.com
Context tracking involves tracking user, kernel, guest switches. 32-bit
shares interrupt and syscall entry and exit code (and context tracking
calls) with 64-bit, and KVM can not be selected if CONTEXT_TRACKING_USER
is enabled, so context tracking can be enabled for 32-bit.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-3-npiggin@gmail.com
There are two separeate implementations for 32-bit and 64-bit which
mostly do the same thing. Consolidating on one implementation ends
up being smaller and simpler, there is just irq soft-mask reconcile
that is specific to 64-bit.
There should be no real functional change with this patch, but it
does make the context tracking calls necessary for 32-bit to support
context tracking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-2-npiggin@gmail.com
Commit ec3eb9d941 ("powerpc/perf: Use PVR rather than
oprofile field to determine CPU version") added usage
of pvr value instead of oprofile field to determine the
platform. In hv-24x7 pmu driver code, pvr check uses PVR_POWER8
when assigning the interface version for power8 platform.
But power8 can also have other pvr values like PVR_POWER8E and
PVR_POWER8NVL. Hence the interface version won't be set
properly incase of PVR_POWER8E and PVR_POWER8NVL.
Fix this issue by adding the checks for PVR_POWER8E and
PVR_POWER8NVL as well.
Fixes: ec3eb9d941 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131184804.220756-1-kjain@linux.ibm.com
When an ALU instruction is preceded by a MOV instruction
that just moves a source register into the destination register of
the ALU, replace that MOV+ALU instructions by an ALU operation
taking the source of the MOV as second source instead of using its
destination.
Before the change, code could look like the following, with
superfluous separate register move (mr) instructions.
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
With this commit, addition instructions take r30 and r29 directly.
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6719beaf01f9dcbcdbb787ef67c4a2f8e3a4cb6.1675245773.git.christophe.leroy@csgroup.eu
At the time being, all ALU operation are performed with same L-source
and destination, requiring the L-source to be moved into destination via
a separate register move, like:
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
Introduce a second source register to all ALU operations. For the time
being that second source register is made equal to the destination
register.
That change will allow, via following patch, to optimise the generated
code as:
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5aaaba50d9d6b4a0e9f0cd4a5e34101aca1e247.1675245773.git.christophe.leroy@csgroup.eu
Now that two real additional passes are performed in case of extra pass
requested by BPF core, padding is not needed anymore except during
initial pass done before memory allocation to count maximum possible
program size.
So, only do the padding when 'image' is NULL.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/921851d6577badc1e6b08b270a0ced80a6a26d03.1675245773.git.christophe.leroy@csgroup.eu
BPF core calls the jit compiler again for an extra pass in order
to properly set subprog addresses.
Unlike other architectures, powerpc only updates the addresses
during that extra pass. It means that holes must have been left
in the code in order to enable the maximum possible instruction
size.
In order to avoid waste of space, and waste of CPU time on powerpc
processors on which the NOP instruction is not 0-cycle, perform
two real additional passes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d484a4ac95949ff55fc4344b674e7c0d3ddbfcd5.1675245773.git.christophe.leroy@csgroup.eu
BPF progs are never called with more than one argument, plus the
tail call count as a second argument when needed.
So, no need to retrieve 9th and 10th argument (5th 64 bits argument)
from the stack in prologue.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/89a200fb45048601475c092c5775294dee3886de.1675245773.git.christophe.leroy@csgroup.eu
Until now a stack frame was set at all time due to the need
to keep tail call counter in the stack.
But since commit 89d21e259a ("powerpc/bpf/32: Fix Oops on tail call
tests") the tail call counter is passed via register r4. It is therefore
not necessary anymore to have a stack frame for that.
Just like PPC64, implement bpf_has_stack_frame() and only sets the frame
when needed.
The difference with PPC64 is that PPC32 doesn't have a redzone, so
the stack is required as soon as non volatile registers are used or
when tail call count is set up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix commit reference in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d7b654a3cfe73d998697cb29bbc5ffd89bfdb1.1675245773.git.christophe.leroy@csgroup.eu
That test was introducted in 2006 by
commit 00ae36de49 ("[POWERPC] Better check in show_instructions").
At that time, there was no BPF progs.
As seen in message of commit 89d21e259a ("powerpc/bpf/32: Fix Oops
on tail call tests"), when a page fault occurs in test_bpf.ko for
instance, the code is dumped as XXXXXXXXs. Allthough
__kernel_text_address() checks is_bpf_text_address(), it seems it is
not enough.
Today, show_instructions() uses get_kernel_nofault() to read the code,
so there is no real need for additional verifications.
ARM64 and x86 don't do any additional check before dumping
instructions. Do the same and remove __kernel_text_address()
in show_instructions().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4fd69ef7945518c3e27f96b95046a5c1468d35bf.1675245773.git.christophe.leroy@csgroup.eu
For all unrecoverable errors we are missing to log the
error, Since machine_check_log_err() is not getting called
for unrecoverable errors. machine_check_log_err() is called
from deferred handler, To run deferred handlers we have to do
irq work raise from the exception handler.
For recoverable errors exception vector code takes care of
running deferred handlers.
For unrecoverable errors raise irq work in save_mce_event(),
So that we log the error from MCE deferred handler.
Log without this change
MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [0000000010000df4]
MCE: CPU27: Initiator CPU
MCE: CPU27: Unknown
Log with this change
MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU24: PID: 1589811 Comm: inject-ra-err NIP: [0000000010000e48]
MCE: CPU24: Initiator CPU
MCE: CPU24: Unknown
RTAS: event: 5, Type: Platform Error (224), Severity: 3
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230201095933.129482-1-ganeshgr@linux.ibm.com
Currently, for vmalloc areas with flag VM_IOREMAP set, except of the
specific alignment clamping in __get_vm_area_node(), they will be
1) Shown as ioremap in /proc/vmallocinfo;
2) Ignored by /proc/kcore reading via vread()
So for the io mapping in ioremap_phb() of ppc, we should set VM_IOREMAP in
flag to make it handled correctly as above.
Link: https://lkml.kernel.org/r/20230206084020.174506-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Every architecture that supports FLATMEM memory model defines its own
version of pfn_valid() that essentially compares a pfn to max_mapnr.
Use mips/powerpc version implemented as static inline as a generic
implementation of pfn_valid() and drop its per-architecture definitions.
[rppt@kernel.org: fix the generic pfn_valid()]
Link: https://lkml.kernel.org/r/Y9lg7R1Yd931C+y5@kernel.org
Link: https://lkml.kernel.org/r/20230129124235.209895-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Huacai Chen <chenhuacai@loongson.cn> [LoongArch]
Acked-by: Stafford Horne <shorne@gmail.com> [OpenRISC]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Brian Cain <bcain@quicinc.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace indirect modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
Link: https://lkml.kernel.org/r/20230126193752.297968-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
This looks like it came across from x86, but x86 uses TLB_FLUSH_ALL as
a parameter to internal functions. Powerpc never sets it anywhere.
Remove the associated logic and leave a warning for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-4-npiggin@gmail.com
Paul Mackerras