In an incredibly strange API design decision, qdisc->destroy() gets
called even if qdisc->init() never succeeded, not exclusively since
commit 87b60cfacf ("net_sched: fix error recovery at qdisc creation"),
but apparently also earlier (in the case of qdisc_create_dflt()).
The taprio qdisc does not fully acknowledge this when it attempts full
offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in
taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS
parsed from netlink (in taprio_change(), tail called from taprio_init()).
But in taprio_destroy(), we call taprio_disable_offload(), and this
determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags).
But looking at the implementation of FULL_OFFLOAD_IS_ENABLED()
(a bitwise check of bit 1 in q->flags), it is invalid to call this macro
on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set
to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on
an invalid set of flags.
As a result, it is possible to crash the kernel if user space forces an
error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling
of taprio_enable_offload(). This is because drivers do not expect the
offload to be disabled when it was never enabled.
The error that we force here is to attach taprio as a non-root qdisc,
but instead as child of an mqprio root qdisc:
$ tc qdisc add dev swp0 root handle 1: \
mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:1 \
taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Unable to handle kernel paging request at virtual address fffffffffffffff8
[fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Call trace:
taprio_dump+0x27c/0x310
vsc9959_port_setup_tc+0x1f4/0x460
felix_port_setup_tc+0x24/0x3c
dsa_slave_setup_tc+0x54/0x27c
taprio_disable_offload.isra.0+0x58/0xe0
taprio_destroy+0x80/0x104
qdisc_create+0x240/0x470
tc_modify_qdisc+0x1fc/0x6b0
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
Fix this by keeping track of the operations we made, and undo the
offload only if we actually did it.
I've added "bool offloaded" inside a 4 byte hole between "int clockid"
and "atomic64_t picos_per_byte". Now the first cache line looks like
below:
$ pahole -C taprio_sched net/sched/sch_taprio.o
struct taprio_sched {
struct Qdisc * * qdiscs; /* 0 8 */
struct Qdisc * root; /* 8 8 */
u32 flags; /* 16 4 */
enum tk_offsets tk_offset; /* 20 4 */
int clockid; /* 24 4 */
bool offloaded; /* 28 1 */
/* XXX 3 bytes hole, try to pack */
atomic64_t picos_per_byte; /* 32 0 */
/* XXX 8 bytes hole, try to pack */
spinlock_t current_entry_lock; /* 40 0 */
/* XXX 8 bytes hole, try to pack */
struct sched_entry * current_entry; /* 48 8 */
struct sched_gate_list * oper_sched; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global 'raw_v6_hashinfo' variable can be accessed even when IPv6 is
administratively disabled via the 'ipv6.disable=1' kernel command line
option, leading to a crash [1].
Fix by restoring the original behavior and always initializing the
variable, regardless of IPv6 support being administratively disabled or
not.
[1]
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 173e18067 P4D 173e18067 PUD 173e1a067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 271 Comm: ss Not tainted 6.0.0-rc4-custom-00136-g0727a9a5fbc1 #1396
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:raw_diag_dump+0x310/0x7f0
[...]
Call Trace:
<TASK>
__inet_diag_dump+0x10f/0x2e0
netlink_dump+0x575/0xfd0
__netlink_dump_start+0x67b/0x940
inet_diag_handler_cmd+0x273/0x2d0
sock_diag_rcv_msg+0x317/0x440
netlink_rcv_skb+0x15e/0x430
sock_diag_rcv+0x2b/0x40
netlink_unicast+0x53b/0x800
netlink_sendmsg+0x945/0xe60
____sys_sendmsg+0x747/0x960
___sys_sendmsg+0x13a/0x1e0
__sys_sendmsg+0x118/0x1e0
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 0daf07e527 ("raw: convert raw sockets to RCU")
Reported-by: Roberto Ricci <rroberto2r@gmail.com>
Tested-by: Roberto Ricci <rroberto2r@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220916084821.229287-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TSN features on the ENETC (taprio, cbs, gate, police) are configured
through a mix of command BD ring messages and port registers:
enetc_port_rd(), enetc_port_wr().
Port registers are a region of the ENETC memory map which are only
accessible from the PCIe Physical Function. They are not accessible from
the Virtual Functions.
Moreover, attempting to access these registers crashes the kernel:
$ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001
fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15
fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002)
fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0
$ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2
Unable to handle kernel paging request at virtual address ffff800009551a08
Internal error: Oops: 96000007 [#1] PREEMPT SMP
pc : enetc_setup_tc_taprio+0x170/0x47c
lr : enetc_setup_tc_taprio+0x16c/0x47c
Call trace:
enetc_setup_tc_taprio+0x170/0x47c
enetc_setup_tc+0x38/0x2dc
taprio_change+0x43c/0x970
taprio_init+0x188/0x1e0
qdisc_create+0x114/0x470
tc_modify_qdisc+0x1fc/0x6c0
rtnetlink_rcv_msg+0x12c/0x390
Split enetc_setup_tc() into separate functions for the PF and for the
VF drivers. Also remove enetc_qos.o from being included into
enetc-vf.ko, since it serves absolutely no purpose there.
Fixes: 34c6adf197 ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VF netdev driver shouldn't respond to changes in the NETIF_F_HW_TC
flag; only PFs should. Moreover, TSN-specific code should go to
enetc_qos.c, which should not be included in the VF driver.
Fixes: 79e499829f ("net: enetc: add hw tc hw offload features for PSPF capability")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason A. Donenfeld says:
====================
wireguard patches for 6.0-rc6
1) The ratelimiter timing test doesn't help outside of development, yet
it is currently preventing the module from being inserted on some
kernels when it flakes at insertion time. So we disable it.
2) A fix for a build error on UML, caused by a recent change in a
different tree.
3) A WARN_ON() is triggered by Kees' new fortified memcpy() patch, due
to memcpy()ing over a sockaddr pointer with the size of a
sockaddr_in[6]. The type safe fix is pretty simple. Given how classic
of a thing sockaddr punning is, I suspect this may be the first in a
few patches like this throughout the net tree, once Kees' fortify
series is more widely deployed (current it's just in next).
====================
Link: https://lore.kernel.org/r/20220916143740.831881-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doing a variable-sized memcpy is slower, and the compiler isn't smart
enough to turn this into a constant-size assignment.
Further, Kees' latest fortified memcpy will actually bark, because the
destination pointer is type sockaddr, not explicitly sockaddr_in or
sockaddr_in6, so it thinks there's an overflow:
memcpy: detected field-spanning write (size 28) of single field
"&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16)
Fix this by just assigning by using explicit casts for each checked
case.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A previous commit tried to make the ratelimiter timings test more
reliable but in the process made it less reliable on other
configurations. This is an impossible problem to solve without
increasingly ridiculous heuristics. And it's not even a problem that
actually needs to be solved in any comprehensive way, since this is only
ever used during development. So just cordon this off with a DEBUG_
ifdef, just like we do for the trie's randomized tests, so it can be
enabled while hacking on the code, and otherwise disabled in CI. In the
process we also revert 151c8e499f.
Fixes: 151c8e499f ("wireguard: ratelimiter: use hrtimer in selftest")
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As in previous commit for sfc, fix TX channels offset when
efx_siena_separate_tx_channels is false (the default)
Fixes: 25bde571b4 ("sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20220915141653.15504-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4Hu8
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two fixes for hangs in the umount sequence where threads depend on
each other and the work must be finished in the right order
- in zoned mode, wait for flushing all block group metadata IO before
finishing the zone
* tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: wait for extent buffer IOs before finishing a zone
btrfs: fix hang during unmount when stopping a space reclaim worker
btrfs: fix hang during unmount when stopping block group reclaim worker
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYymPoQAKCRCRxhvAZXjc
ounZAQDGLmHjqby6KFLbNIHkgIMzODUk3OCLo3jNRsSw+SsJFQD/cW1eBM5P+ctO
bePiCHMZv4Gh+G1dR2cchd3Etwks4A0=
=7kI/
-----END PGP SIGNATURE-----
Merge tag 'fs.fixes.v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fix from Christian Brauner:
"Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e129 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
When userspace passes -1 for an ownership change the ownership fields
in struct iattr stay uninitialized. Usually this is fine because any
code making use of any fields in struct iattr must check the
->ia_valid field whether the value of interest has been initialized.
That's true for all struct iattr passing code.
However, over the course of the last year with more heavy use of KMSAN
we found quite a few places that got this wrong. A recent one I fixed
was 3cb6ee9914 ("9p: only copy valid iattrs in 9P2000.L setattr
implementation").
But we also have LSM hooks. Actually we have two. The first one is
security_inode_setattr() in notify_change() which does the right thing
and passes the full struct iattr down to LSMs and thus LSMs can check
whether it is initialized.
But then we also have security_path_chown() which passes down a path
argument and the target ownership as the filesystem would see it. For
the latter we now generate the target values based on struct iattr and
pass it down. However, when userspace passes -1 then struct iattr
isn't initialized.
This patch simply initializes ->ia_vfs{g,u}id with INVALID_VFS{G,U}ID
so the hook continue to see invalid ownership when -1 is passed from
userspace. The only LSM that cares about the actual values is Tomoyo.
The vfs codepaths don't look at these fields without ->ia_valid being
set so there's no harm in initializing ->ia_vfs{g,u}id. Arguably this
is also safer since we can't end up copying valid ownership values
when invalid ownership values should be passed.
This only affects mainline. No kernel has been released with this and
thus no backport is needed. The commit is thus marked with a Fixes:
tag but annotated with "# mainline only" (I didn't quite remember what
Greg said about how to tell stable autoselect to not bother with fixes
for mainline only)"
* tag 'fs.fixes.v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
open: always initialize ownership fields
There is a single kmalloc in this driver, and it's not currently
guarded against allocation failure. Do it here by just bailing-out
the reboot handler, in case this tentative allocation fails.
Fixes: 416581e486 ("efi: efibc: avoid efivar API for setting variables")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Remove the recent "unshare time namespace on vfork+exec" feature (Andrei Vagin)
-----BEGIN PGP SIGNATURE-----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=yFGx
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
syzbot is still complaining uninit-value in tcp_recvmsg(), for
commit 1228b34c8d ("net: clear msg_get_inq in __sys_recvfrom() and
__copy_msghdr_from_user()") missed that __get_compat_msghdr() is called
instead of copy_msghdr_from_user() when MSG_CMSG_COMPAT is specified.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 1228b34c8d ("net: clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/d06d0f7f-696c-83b4-b2d5-70b5f2730a37@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions expect to be called from RCU read-side critical section,
but this only happens when invoked from the data path via
ip{,6}_mr_input(). They can also be invoked from process context in
response to user space adding a multicast route which resolves a cache
entry with queued packets [1][2].
Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call
paths.
[1]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip_mroute_setsockopt+0x11c/0x1420
stack backtrace:
CPU: 0 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ipmr_queue_xmit+0x135/0x1ab0
ip_mr_forward+0xe7b/0x13d0
ipmr_mfc_add+0x1a06/0x2ad0
ip_mroute_setsockopt+0x5c1/0x1420
do_ip_setsockopt+0x23d/0x37f0
ip_setsockopt+0x56/0x80
raw_setsockopt+0x219/0x290
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[2]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv6/ip6mr.c:69 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip6_mroute_setsockopt+0x6b9/0x2630
stack backtrace:
CPU: 1 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ip6mr_forward2.isra.0+0xc9/0x1160
ip6_mr_forward+0xef0/0x13f0
ip6mr_mfc_add+0x1ff2/0x31f0
ip6_mroute_setsockopt+0x1825/0x2630
do_ipv6_setsockopt+0x462/0x4440
ipv6_setsockopt+0x105/0x140
rawv6_setsockopt+0xd8/0x690
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ebc3197963 ("ipmr: add rcu protection over (struct vif_device)->dev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Update a few comments for clarity.
Fixes: 530f9216a9 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In of_mdiobus_register(), we should call of_node_put() for 'child'
escaped out of for_each_available_child_of_node().
Fixes: 66bdede495 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Co-developed-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to i915_perf assuming that it can use the i915_gem_context reference
to protect its i915->gem.contexts.list iteration, we need to defer removal
of the context from the list until last reference to the context is put.
However, there is a risk of triggering kernel warning on contexts list not
empty at driver release time if we deleagate that task to a worker for
i915_gem_context_release_work(), unless that work is flushed first.
Unfortunately, it is not flushed on driver release. Fix it.
Instead of additionally calling flush_workqueue(), either directly or via
a new dedicated wrapper around it, replace last call to
i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue()
that performs both tasks.
Fixes: 75eefd8258 ("drm/i915: Release i915_gem_context from a worker")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: stable@kernel.org # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 1cec344424)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit a09b314005.
Dusty Mabe reported consistent hang during CoreOS shutdown with a MD
RAID1 setup. Although apparently similar hangs happened before,
and this patch most likely is not the root cause it made it much
more severe. Revert it until we can figure out what is going on
with the md driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220919144049.978907-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This turns the FTGPIO010 irqchip immutable.
Tested on the D-Link DIR-685.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
If creation of software node fails, the locally allocated string
array is left unfreed. Free it on error path.
Fixes: 6fda593f30 ("gpio: mockup: Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.
Fixes: 303e6da994 ("gpio: mockup: remove gpio debugfs when remove device")
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Before we switched to ->read_skb(), ->read_sock() was passed with
desc.count=1, which technically indicates we only read one skb per
->sk_data_ready() call. However, for TCP, this is not true.
TCP at least has sk_rcvlowat which intentionally holds skb's in
receive queue until this watermark is reached. This means when
->sk_data_ready() is invoked there could be multiple skb's in the
queue, therefore we have to read multiple skbs in tcp_read_skb()
instead of one.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Reported-by: Peilin Ye <peilin.ye@bytedance.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220912173553.235838-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit ff878b408a.
Unfortunately the recent fix seems bringing another regressions with
PulseAudio / pipewire, at least for Steinberg and MOTU devices.
As a temporary solution, do a straight revert. The issue for Android
will be revisited again later by another different fix (if any).
Fixes: ff878b408a ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Francesco Dolcini says:
====================
Revert fec PTP changes
Revert the last 2 FEC PTP changes from Csókás Bence, they are causing multiple
issues and we are at 6.0-rc5.
====================
Link: https://lore.kernel.org/r/20220912070143.98153-1-francesco.dolcini@toradex.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Maximum frame length check is enabled in lan937x switch on POR, But it
is found to be disabled on driver during port setup operation. Due to
this, packets are not dropped when transmitted with greater than configured
value. For testing, setup made for lan1->lan2 transmission and configured
lan1 interface with a frame length (less than 1500 as mentioned in
documentation) and transmitted packets with greater than configured value.
Expected no packets at lan2 end, but packets observed at lan2.
Based on the documentation, packets should get discarded if the actual
packet length doesn't match the frame length configured. Frame length check
should be disabled only for cascaded ports due to tailtags.
This feature was disabled on ksz9477 series due to ptp issue, which is
not in lan937x series. But since lan937x took ksz9477 as base, frame
length check disabled here as well. Patch added to remove this portion
from port setup so that maximum frame length check will be active for
normal ports.
Fixes: 55ab6ffaf3 ("net: dsa: microchip: add DSA support for microchip LAN937x")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Link: https://lore.kernel.org/r/20220912051228.1306074-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e129 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
During that change we forgot to account for the case were the passed
ownership value is -1. In this case the ownership fields in struct iattr
aren't initialized but we rely on them being initialized by the time we
generate the ownership to pass down to the LSMs. All the major LSMs
don't care about the ownership values at all. Only Tomoyo uses them and
so it took a while for syzbot to unearth this issue.
Fix this by initializing the ownership fields and do it within the
retry_deleg block. While notify_change() doesn't alter the ownership
fields currently we shouldn't rely on it.
Since no kernel has been released with these changes this does not
needed to be backported to any stable kernels.
[Christian Brauner (Microsoft) <brauner@kernel.org>]
* rewrote commit message
* use INVALID_VFS{G,U}ID macros
Fixes: b27c82e129 ("attr: port attribute changes to new types") # mainline only
Reported-and-tested-by: syzbot+541e21dcc32c4046cba9@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The Kconfig symbol depended on MMU but was dropped by the commit
acad3fe650 ("drm/hisilicon: Removed the dependency on the mmu")
because it already had as a dependency ARM64 that already selects MMU.
But later, commit a0f25a6bb3 ("drm/hisilicon/hibmc: Allow to be built
if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64
when COMPILE_TEST is set but that could lead to unmet direct dependencies
and linking errors.
Prevent a kconfig warning when MMU is not enabled by making
DRM_HISI_HIBMC depend on MMU.
WARNING: unmet direct dependencies detected for DRM_TTM
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n]
Selected by [m]:
- DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m]
- DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y])
Fixes: acad3fe650 ("drm/hisilicon: Removed the dependency on the mmu")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: John Stultz <jstultz@google.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
G200ER does not seem to support 24 bpp, so force the console to
use 32 bpp. The problem got introduced when commit 73f54d5d96
("drm/mgag200: Remove special case for G200SE with <2 MiB") changed
the preferred color depth from 32 bit to 24 bit.
A setting of 24 is the correct color depth, but G200ER doesn't seem
to be able to use the respective RGB888 color format. Using 24-bit
color with forced 32 bpp works around the problem.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 73f54d5d96 ("drm/mgag200: Remove special case for G200SE with <2 MiB")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220915150348.31504-1-tzimmermann@suse.de
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20220913000901.959546-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The warning message of unsupported FW appears every time RX timestamps
are disabled on the interface. The patch fixes the flags to correct set
for the check.
Fixes: 66ed81dced ("bnxt_en: Enable packet timestamping for all RX packets")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220915234932.25497-1-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Late stage fixes for v6.0. Temporarily mark iwlwifi's mei code broken
as it breaks suspend for iwd users and also don't spam nss trimming
messages. mt76 has fixes for aggregation sequence numbers and a
regression related to the VHT extended NSS BW feature.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmMoSPcRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu/dAf/d8ItryiSE6wVrZSrhuDbcuCHbofUfF7D
DuFP5y96DtbOv8tWmOpFG8xIKQSYFk+5rN5Q2CdxCP3UszMMRcAkrrmNIeoB+Oll
XeW0GpODZFqs4sO11t/zLMXNdp8FWQV+RkL1LVE2k5S3HNv0SIcg3GOIHzzlNjHg
Z9RFVFS7+RkGi1MQq2SJneYS/KCKxguNq4njWxkISz7tioEOyAEojxbTp2gitMzz
WE5sN/58miW0hAuch23B4qHAydTudOgwTBGczJe12mozCUHZf2A4CEZ4MJIx/H/l
WwBabwTkPU3b9+yHvrA9BqTdeEKXiaCxTlvKF1/42yIU5ihKwT499Q==
=g3jP
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.0
Late stage fixes for v6.0. Temporarily mark iwlwifi's mei code broken
as it breaks suspend for iwd users and also don't spam nss trimming
messages. mt76 has fixes for aggregation sequence numbers and a
regression related to the VHT extended NSS BW feature.
* tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
wifi: mt76: fix reading current per-tid starting sequence number for aggregation
wifi: iwlwifi: Mark IWLMEI as broken
wifi: iwlwifi: don't spam logs with NSS>2 messages
====================
Link: https://lore.kernel.org/r/20220919105003.1EAE7C433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
-----BEGIN PGP SIGNATURE-----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=w5ul
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
* tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix hang up with small MTU hard-interface
====================
Link: https://lore.kernel.org/r/20220916160931.1412407-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b1 ("sfc: decouple TXQ type from label")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b4 ("sfc: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Disable page_pool/XDP support for MT7621 SoC in order fix a regression
introduce adding XDP for MT7986 SoC. There is no a real use case for XDP
on MT7621 since it is a low-end cpu. Moreover this patch reduces the
memory footprint.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Fixes: 23233e577e ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/2bf31e27b888c43228b0d84dd2ef5033338269e2.1663074002.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per GDMA spec, rmb is necessary after checking owner_bits, before
reading EQ or CQ entries.
Add rmb in these two places to comply with the specs.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reported-by: Sinan Kaya <Sinan.Kaya@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1662928805-15861-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hwstats debugfs files are only writeable, but they are created with
read and write permissions, causing certain selftests to fail [1].
Fix by creating the files with write permission only.
[1]
# ./test_offload.py
Test destruction of generic XDP...
Traceback (most recent call last):
File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module>
simdev = NetdevSimDev()
[...]
Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex
cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument
Fixes: 1a6d7ae7d6 ("netdevsim: Introduce support for L3 offload xstats")
Reported-by: Jie2x Zhou <jie2x.zhou@intel.com>
Tested-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read. This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean