Some parameters use CHECK_BOOL, but should really use
CHECK_BOOL_INCOMPLETE. We cannot currently check whether
the inherited infoframes and audio are set up correctly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-4-maarten.lankhorst@linux.intel.com
[mlankhorst: Add danvet's comment about why this is needed.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The flag just tells us IPS can be enabled, if the primary plane
is not enabled it means IPS might not be. This never triggered
in CI because we don't have a haswell ULT there, but can be
reproduced easily with kms_atomic_transitions.plane-all-modeset-transition
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Remove from haswell_get_pipe_config too. (danvet)]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8_CONFIG0 (0xD00) is a protected by a lock (bit 31) which is set by
the BIOS, so there is no way we can enable the three chicken bits
mandated by the WA (the BIOS should be doing it instead).
v2: Rebased
v3: Standalone patch
References: b033bb6d5d ("drm/i915/gen9: Enable must set chicken bits in config0 reg")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510185589-9100-2-git-send-email-oscar.mateo@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Now that we always execute a context switch upon module load, there is
no need to queue a delayed task for doing so. The purpose of the delayed
task is to enable GT powersaving, for which we need the HW state to be
valid (i.e. having loaded a context and initialised basic state). We
used to defer this operation as historically it was slow (due to slow
register polling, fixed with commit 1758b90e38 ("drm/i915: Use a hybrid
scheme for fast register waits")) but now we have a requirement to save
the default HW state.
v2: Load the kernel context (to provide the power context) upon resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171112112738.1463-3-chris@chris-wilson.co.uk
We no longer use intel_crtc->wm.active for watermarks any more,
which was incorrect. But this uncovered a bug in sanitize_watermarks(),
which meant that we wrote the correct watermarks, but the next
update would still use the wrong hw watermarks for calculating.
This caused all further updates to fail with -EINVAL and the
log would reveal an error like the one below:
[ 10.043902] [drm:ilk_validate_wm_level.part.8 [i915]] Sprite WM0 too large 56 (max 0)
[ 10.043960] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
[ 10.044030] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a772 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Cc: stable@vger.kernel.org #v4.8+
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
As we now record the default HW state and so only emit the "golden"
renderstate once to prepare the HW, there is no advantage in keeping the
renderstate batch around as it will never be used again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-8-chris@chris-wilson.co.uk
Take a copy of the HW state after a reset upon module loading by
executing a context switch from a blank context to the kernel context,
thus saving the default hw state over the blank context image.
We can then use the default hw state to initialise any future context,
ensuring that each starts with the default view of hw state.
v2: Unmap our default state from the GTT after stealing it from the
context. This should stop us from accidentally overwriting it via the
GTT (and frees up some precious GTT space).
Testcase: igt/gem_ctx_isolation
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-7-chris@chris-wilson.co.uk
In the next few patches, we will want to both copy out of the context
image and write a valid image into a new context. To be completely safe,
we should then couple in our domain tracking to ensure that we don't
have any issues with stale data remaining in unwanted cachelines.
Historically, we omitted the .write=true from the call to set-gtt-domain
in i915_switch_context() in order to avoid a stall between every request
as we would want to wait for the previous context write from the gpu.
Since then, we limit the set-gtt-domain to only occur when we first bind
the vma, so once in use we will never stall, and we are sure to flush
the context following a load from swap.
Equally we never applied the lessons learnt from ringbuffer submission
to execlists; so time to apply the flush of the lrc after load as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-6-chris@chris-wilson.co.uk
intel_modeset_gem_init() now only sets up the legacy overlay, so let's
remove the function and call the setup directly during driver load. This
should help us find a better point in the initialisation sequence for it
later.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-5-chris@chris-wilson.co.uk
Despite its name intel_init_clock_gating applies both display clock gating
workarounds; GT mmio workarounds and the occasional GT power context
workaround. Worse, sometimes it includes a context register workaround
which we need to apply before we record the default HW state for all
contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-4-chris@chris-wilson.co.uk
GT powersaving is tightly coupled to the request infrastructure. To
avoid complications with the order of initialisation in the next patch
(where we want to send requests to hw during GEM init) move the
powersaving initialisation into the purview of i915_gem_init().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-3-chris@chris-wilson.co.uk
In the next few patches, we will have a hard requirement that we emit a
context-switch to the perma-pinned i915->kernel_context (so that we can
save the HW state using that context-switch). As the first context
itself may be classed as a kernel context, we want to be explicit in our
comparison. For an extra-layer of finesse, we can check the last
unretired context on the engine; as well as the last retired context
when idle.
v2: verbose verbosity
v3: Always force the switch, even when the engine is idle, and update
the assert that this happens before suspend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-2-chris@chris-wilson.co.uk
We want to be able to report back to userspace details about an engine's
class, and in return for userspace to be able to request actions
regarding certain classes of engines. To isolate the uABI from any
variations between hw generations, we define an abstract class for the
engines and internally map onto the hw.
v2: Remove MAX from the uABI; keep it internal if we need it, but don't
let userspace make the mistake of using it themselves.
v3: s/OTHER/INVALID/
The use of OTHER is ill-defined, so remove it from the uABI as any
future new type of engine can define a class to suit it. But keep a
reserved value for an invalid class, so that we can always
unambiguously express when something doesn't belong to the
classification.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v2
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-1-chris@chris-wilson.co.uk
So it appears that commit 5427f20785 ("drm/i915: Bump wait-times for
the final CS interrupt before parking") was a little over optimistic in
its belief that it had successfully waited for all residual activity on
the engines before parking. Numerous sightings in CI since then of
<7>[ 52.542886] [IGT] core_auth: executing
<3>[ 52.561013] [drm:intel_engines_park [i915]] *ERROR* vcs0 is not idle before parking
<7>[ 52.561215] intel_engines_park vcs0
<7>[ 52.561229] intel_engines_park current seqno 98, last 98, hangcheck 0 [-247449 ms], inflight 0
<7>[ 52.561238] intel_engines_park Reset count: 0
<7>[ 52.561266] intel_engines_park Requests:
<7>[ 52.561363] intel_engines_park RING_START: 0x00000000 [0x00000000]
<7>[ 52.561377] intel_engines_park RING_HEAD: 0x00000000 [0x00000000]
<7>[ 52.561390] intel_engines_park RING_TAIL: 0x00000000 [0x00000000]
<7>[ 52.561406] intel_engines_park RING_CTL: 0x00000000
<7>[ 52.561422] intel_engines_park RING_MODE: 0x00000200 [idle]
<7>[ 52.561442] intel_engines_park ACTHD: 0x00000000_00000000
<7>[ 52.561459] intel_engines_park BBADDR: 0x00000000_00000000
<7>[ 52.561474] intel_engines_park Execlist status: 0x00000301 00000000
<7>[ 52.561489] intel_engines_park Execlist CSB read 5 [5 cached], write 5 [5 from hws], interrupt posted? no
<7>[ 52.561500] intel_engines_park ELSP[0] idle
<7>[ 52.561510] intel_engines_park ELSP[1] idle
<7>[ 52.561519] intel_engines_park HW active? 0x0
<7>[ 52.561608] intel_engines_park Idle? yes
<7>[ 52.561617] intel_engines_park
on Braswell, which indicates that the engine just needs that little bit
longer after flushing the tasklet to settle. So give it a few more
milliseconds before declaring an err and applying the emergency brake.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103479
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110112550.28909-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
intel_uncore_forcewake_reset() does forcewake puts and gets as such
we need to make sure that no-one tries to access the PUNIT->PMIC bus
(on systems where this bus is shared) while it runs, otherwise bad
things happen.
Normally this is taken care of by the i915_pmic_bus_access_notifier()
which does an intel_uncore_forcewake_get(FORCEWAKE_ALL) when some other
driver tries to access the PMIC bus, so that later forcewake gets are
no-ops (for the duration of the bus access).
But intel_uncore_forcewake_reset gets called in 3 cases:
1) Before registering the pmic_bus_access_notifier
2) After unregistering the pmic_bus_access_notifier
3) To reset forcewake state on a GPU reset
In all 3 cases the i915_pmic_bus_access_notifier() protection is
insufficient.
This commit fixes this race by calling iosf_mbi_punit_acquire() before
calling intel_uncore_forcewake_reset(). In the case where it is called
directly after unregistering the pmic_bus_access_notifier, we need to
hold the punit-lock over both calls to avoid a race where
intel_uncore_fw_release_timer() may execute between the 2 calls.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019111620.26761-3-hdegoede@redhat.com
In order to allow the mock breadcrumbs tests to run without device irqs
being enabled, move the intel_irqs_enabled() assert deeper to just
before we commit to enabling the HW irq.
v2: Add a FIXME explaining that placing the assertion so deep is not
ideal, but a compromise for mock breadcrumbs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107102003.1802-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Originally it was anticipated that timeouts would be a rare event, and
so merit a warning that the test was incomplete. However, for igt we
keep the timeout low, and hitting the timeout is intentional. It no
longer necessitates a warning, but to be expected.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110101110.12042-1-chris@chris-wilson.co.uk
Reviwed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The lease updates missed a few bits of docs, fixed up
the wrong name on the property lookup fn as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Whenever we want to unbind a vma, we must wait on all GPU activity to
complete first. (This is what gives us the ability to do fine grained
eviction and purging by only having to wait on the VMA that we need to
unbind to proceed; though if pushed we can make it a rule that we are
only allowed to unbind already idle VMA and move the burden of the work
and organising the sleep onto the caller.) Currently, we might only
sleep if the vma is still active on the GPU, but in principle
i915_vma_unbind() always implies a sleep, so mark it up with a
might_sleep().
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109213450.13875-2-chris@chris-wilson.co.uk
vm_free_page() may call down into set_pages_array_wb() (which itself
sleeps, on x86 at least) but only if on !llc and the caches overflow.
Since this is unlikely, we only rarely trigger the error in practice,
and so to make CI detection of this sleeping bug possible we want to
mark the common vm_free_page() as a potential sleep.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109213450.13875-1-chris@chris-wilson.co.uk
Trying to enable printk debugging for GEM is fraught with the issue of
spam; interactions with HW are very frequent and often boring. However,
one instance where they are not so boring is just before a BUG; here
ftrace provides a facility to dump its ringbuffer on an oops. So for CI
let's enable trace_printk() to capture the last exchanges with HW as a
death rattle.
For example,
[ 79.234110] ------------[ cut here ]------------
[ 79.234137] kernel BUG at drivers/gpu/drm/i915/intel_lrc.c:907!
[ 79.234145] invalid opcode: 0000 [#1] SMP
[ 79.234153] Dumping ftrace buffer:
[ 79.234158] ---------------------------------
...
[ 79.314044] gem_conc-1059 1..s1 79203443us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.2, seqno=145
[ 79.314089] gem_conc-1059 1..s. 79220800us : intel_lrc_irq_handler: bcs0 csb[1/1]: status=0x00000018:0x00000005
[ 79.314133] gem_conc-1059 1..s. 79220803us : intel_lrc_irq_handler: bcs0 out[0]: ctx=5.1, seqno=145
[ 79.314177] gem_conc-1062 2..s1 79230458us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.1, seqno=146
[ 79.314220] gem_conc-1062 2..s1 79230515us : intel_lrc_irq_handler: bcs0 in[0]: ctx=8.2, seqno=147
[ 79.314265] gem_conc-1059 1..s1 79230951us : intel_lrc_irq_handler: bcs0 csb[2/3]: status=0x00000012:0x00000008
[ 79.314309] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.2, seqno=147
[ 79.314353] gem_conc-1059 1..s1 79230954us : intel_lrc_irq_handler: bcs0 csb[3/3]: status=0x00008002:0x00000008
[ 79.314396] gem_conc-1059 1..s1 79230955us : intel_lrc_irq_handler: bcs0 out[0]: ctx=8.1, seqno=147
[ 79.314402] ---------------------------------
v2: Tweak the formatting to be more consistent between in/out.
v3: do {} while (0) stub macro protection
Suggested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109143019.16568-1-chris@chris-wilson.co.uk
Eliminate a ton of pointless 'dev' variables in the DP code, and pass
around 'dev_priv' instead of 'dev'.
v2: Rebase
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109152758.32257-1-ville.syrjala@linux.intel.com
No need to pass 'dev' or 'dev_priv' when the function already takes
'intel_dp'. Also let's prefer passing 'dev_priv' instead of 'dev'
when we have to pass one or the other.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-10-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Replace dig_port->port with encoder->port in the BXT DPLL selection.
We can do this because both the master encoder and the fake MST encoders
have the same encoder->port value, whereas using dig_port->port only
worked for the master encoder since the fake encoders were't derived
from intel_digital_port. This eliminates the DP MST special case.
Do this by hand because spatch is having problems with the control
flow due to the dig_port assignment happening in two different
branches.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-8-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Replace crtc->config usage with the passed down crtc state.
Also take the opportunity for some s/pipe_config/crtc_state/ while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Rather than digging through encoder->crtc and crtc->config in the
DPIO PHY functions, pass down the correct crtc state from the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031205123.13123-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
When we close the VMA, we unbind it from the ppgtt and tear down the
page directory pointing at it. That may trigger us to return WC pages
back to the system, requiring conversion back to WB which itself may
sleep. That makes i915_vma_close() unsuitable for use inside the RCU
read lock, which we need to hold to iterate the radixtree.
The fix is quite simple, we can close all the VMA as we close the ppgtt,
we only need to do that instead of closing them during destruction of
the LUT.
v2: Order between closing the LUT and the ppgtt is important; we use the
vma inside the LUT as a means of retrieving the object, and so we must
clear the LUT before freeing the VMA when closing the ppgtt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Fixes: 547da76b57 ("drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)")
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085540.32264-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 94dec87159)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently setting up a bunch of GT registers before we've properly
initialized the rest of the GT hardware leads to these setting being
lost. So looks like I broke HSW with commit b7048ea12f ("drm/i915:
Do .init_clock_gating() earlier to avoid it clobbering watermarks")
by doing init_clock_gating() too early. This should actually affect
other platforms as well, but apparently not to such a great degree.
What I was ultimately after in that commit was to move the
ilk_init_lp_watermarks() call earlier. So let's undo the damage and
move init_clock_gating() back to where it was, and call
ilk_init_lp_watermarks() just before the watermark state readout.
This highlights how fragile and messed up our init order really is.
I wonder why we even initialize the display before gem. The opposite
order would make much more sense to me...
v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must
be done before all planes might get disabled.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reported-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549
Fixes: b7048ea12f ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f72b84c677)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The shared fence array is not autopruning and may continue to grow as an
object is shared between new timelines. Take the opportunity when we
think the object is idle (we have to confirm that any external fence is
also signaled) to decouple all the fences.
We apply a similar trick after waiting on an object, see commit
e54ca97747 ("drm/i915: Remove completed fences after a wait")
v2: No longer need to handle the batch pool as a special case.
v3: Need to trylock from within i915_vma_retire as this may be called
form the shrinker - and we may later try to allocate underneath the
reservation lock, so a deadlock is possible.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: d07f0e59b2 ("drm/i915: Move GEM activity tracking into a common struct reservation_object")
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107220656.5020-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 1ab22356b3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The handling of contexts are peculiar. Instead of tieing their vma to
activity, we pin the context. This means that we cannot simply unbind
the context object itself at will (which would normally cause us to wait
for the vma to be idle), but must manually idle the GPU and retire
requests first.
A consequence of this peculiarity is when doing a last desperate attempt
to recover memory. If the memory is tied up inside active context
objects, we will fail to recover any memory simply by trying to unbind
the objects without first doing a wait-for-idle.
A side-effect of removing the call to shrinker_lock_uninterruptible()
from i915_gem_shrinker_oom() was that we removed an unlocked
wait-for-idle, and so lost the "natural" shrinkage of context objects.
By replacing that with a locked wait from inside i915_gem_shrink(), we
not only replace it with the ability to recover all context objects, but
do so for all i915_gem_shrink_all() callers.
v2: Switching requires request allocation, which is not permitted from
inside the shrinker as it only uses ordinary allocations.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: f2123818ff ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 2f6a378383)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself]
Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
(cherry picked from commit b6b178a772)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When running under virtualization (vGPU active), we must disable
the lazy PPGTT page table initialization optimization introduced by
commit 1482667324 ("drm/i915: Only initialize partially filled
pagetables").
We must do this because GVT-g makes unduly assumptions about guest
behaviour, which this optimization breaks. This results in following
looking errors in the host:
ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1
The real fix is to not to depend on i915 driver behaviour, but instead
either rely on only the contracts that i915 has with the hardware, or
add some paravirtualization. While the real fix is en route, it won't
be finished in time for 4.15, so the best option is to disable the
optimization for now when vGPU is active to avoid breaking 4.15 guests
in existing VM environments.
Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Suggested-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
[Joonas: Rewrote the commit message and added tags.]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 22a8a4fc93)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Originally we set the priority to max upon inserting the request into
the execlists queue (and removing it from the scheduler lists). We could
then use the prio==INT_MAX as a shortcut within execlists_schedule() to
detect the end of the dependency chain. Since commit 1f181225f8
("drm/i915/execlists: Keep request->priority for its lifetime") this is
no longer true as we use the request completion as an indicator the
schedule dependency chain is complete instead. (This allows us to then
reschedule requests even when its context is in flight.) However, this
makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change
the rq->prio at the same time. As the assertion is useful, let's keep
the assertion and remove the micro-optimisation.
Fixes: 1f181225f8 ("drm/i915/execlists: Keep request->priority for its lifetime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 64b80085dd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Back in commit a4b2b01523 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit beecec9017
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec9017 ("drm/i915/execlists: Preemption!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 4a118ecbe9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we close the VMA, we unbind it from the ppgtt and tear down the
page directory pointing at it. That may trigger us to return WC pages
back to the system, requiring conversion back to WB which itself may
sleep. That makes i915_vma_close() unsuitable for use inside the RCU
read lock, which we need to hold to iterate the radixtree.
The fix is quite simple, we can close all the VMA as we close the ppgtt,
we only need to do that instead of closing them during destruction of
the LUT.
v2: Order between closing the LUT and the ppgtt is important; we use the
vma inside the LUT as a means of retrieving the object, and so we must
clear the LUT before freeing the VMA when closing the ppgtt.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638
Fixes: 547da76b57 ("drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)")
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085540.32264-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
4.15 merge window fixes, round 2:
randconfig fix from Arnd, plus the vblank WARN_ON fix from Ville.
* tag 'drm-misc-next-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
This lock is used during register accessing in SRIOV guest.
The register accessing could happen both in irq enabled and
irq disabled cases. Always use irq-safe lock.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ ring submission is used for register accessing on SRIOV
VF that could happen both in irq enabled and irq disabled cases.
Inversion lock could happen on adev->ring_lru_list_lock, while
this operation is useless and just adds overhead in this use
case.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit ea09729c93 ("drm/amdgpu: rework page directory filling
v2") then it becomes a lot harder to verify that "r" is initialized. My
static checker complains and so I've reviewed the code. It does look
like it might be buggy... Anyway, it doesn't hurt to set "r" to zero
at the start.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We shifted some code around in commit 9cca0b8e5d ("drm/amdgpu: move
amdgpu_cs_sysvm_access_required into find_mapping") and now my static
checker complains that "r" might not be initialized at the end of the
function. I've reviewed the code, and that seems possible, but it's
also possible I may have missed something.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We can program GUC_SHIM_CONTROL register with all expected
bits without use of extra macro defined in fwif.h
v2: rebased without pre-prod code
v3: fixed typo
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-4-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We don't keep the workarounds for pre-production hardware
(see intel_detect_preproduction_hw) thus we can drop some
extra steps during firmware upload needed only for unsupported
platforms.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-3-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We silently assumed that DMA transfer will be completed
within assumed timeout and thus we were waiting only at
last step for GuC to become ready. Add intermediate wait
to catch unexpected delays in DMA transfer.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-2-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Transfer of GuC firmware requires few steps that currently
are implemented in two large functions. Split this code into
smaller functions to make these steps small and clear.
Also be prepared for potential DMA xfer step failure.
v2: rename function steps (Sagar)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103151816.62048-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The workaround for this is described as:
"if RenderSurfaceState.Num_Multisamples > 1, disable RCC clock gating if
RenderSurfaceState.Num_Multisamples == 1, set 0x7010[14] = 1"
Further documentation in the internal bug referenced by the bspec
suggest that any of the above suggestions should suffice to fix the
issue. We are going with disabling RCC clock gating.
Unfortunately, what we are doing doesn't match the name of the
workaround, but at least it matches its description.
This change improves CNL stability by avoiding some of the hangs seen in
the platform.
v2: Only disable RCC clock gating.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103183027.5051-1-rafael.antognolli@intel.com
Apparently setting up a bunch of GT registers before we've properly
initialized the rest of the GT hardware leads to these setting being
lost. So looks like I broke HSW with commit b7048ea12f ("drm/i915:
Do .init_clock_gating() earlier to avoid it clobbering watermarks")
by doing init_clock_gating() too early. This should actually affect
other platforms as well, but apparently not to such a great degree.
What I was ultimately after in that commit was to move the
ilk_init_lp_watermarks() call earlier. So let's undo the damage and
move init_clock_gating() back to where it was, and call
ilk_init_lp_watermarks() just before the watermark state readout.
This highlights how fragile and messed up our init order really is.
I wonder why we even initialize the display before gem. The opposite
order would make much more sense to me...
v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must
be done before all planes might get disabled.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reported-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549
Fixes: b7048ea12f ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The shared fence array is not autopruning and may continue to grow as an
object is shared between new timelines. Take the opportunity when we
think the object is idle (we have to confirm that any external fence is
also signaled) to decouple all the fences.
We apply a similar trick after waiting on an object, see commit
e54ca97747 ("drm/i915: Remove completed fences after a wait")
v2: No longer need to handle the batch pool as a special case.
v3: Need to trylock from within i915_vma_retire as this may be called
form the shrinker - and we may later try to allocate underneath the
reservation lock, so a deadlock is possible.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: d07f0e59b2 ("drm/i915: Move GEM activity tracking into a common struct reservation_object")
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107220656.5020-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The handling of contexts are peculiar. Instead of tieing their vma to
activity, we pin the context. This means that we cannot simply unbind
the context object itself at will (which would normally cause us to wait
for the vma to be idle), but must manually idle the GPU and retire
requests first.
A consequence of this peculiarity is when doing a last desperate attempt
to recover memory. If the memory is tied up inside active context
objects, we will fail to recover any memory simply by trying to unbind
the objects without first doing a wait-for-idle.
A side-effect of removing the call to shrinker_lock_uninterruptible()
from i915_gem_shrinker_oom() was that we removed an unlocked
wait-for-idle, and so lost the "natural" shrinkage of context objects.
By replacing that with a locked wait from inside i915_gem_shrink(), we
not only replace it with the ability to recover all context objects, but
do so for all i915_gem_shrink_all() callers.
v2: Switching requires request allocation, which is not permitted from
inside the shrinker as it only uses ordinary allocations.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102936
Fixes: f2123818ff ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Function vega10_apply_state_adjust_rules() only initializes
stable_pstate_sclk_dpm_percentage when
data->registry_data.stable_pstate_sclk_dpm_percentage is not between 1
and 100. The variable is then used to compute stable_pstate_sclk, which
therefore uses an uninitialized value.
Fix this by initializing stable_pstate_sclk_dpm_percentage to
data->registry_data.stable_pstate_sclk_dpm_percentage.
This issue has been found while building the kernel with clang. The
compiler reported a -Wsometimes-uninitialized warning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-and-Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for 4.15 merge window:
Just the cherry-picked vc4 fix plus a GFP_NOFAIL annotation (there's
apparently some new options in-flight to change/audit
too-small-to-fail kmalloc semantics or something like that).
* tag 'drm-misc-next-fixes-2017-11-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix wrong printk format in vc4_bo_stats_debugfs()
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
Since commit 632c6e4ede ("drm/vblank: Fix flip event vblank count")
even drivers that don't implement accurate vblank timestamps will end
up using drm_crtc_accurate_vblank_count(). That leads to a WARN every
time drm_crtc_arm_vblank_event() gets called. The could be as often
as every frame for each active crtc.
Considering drm_crtc_accurate_vblank_count() is never any worse than
the drm_vblank_count() we used previously, let's just skip the WARN
unless DRM_UT_VBL is enabled. That way people won't be bothered by
this unless they're debugging vblank code. And let's also change it
to WARN_ONCE() so that even when you're debugging vblank code you
won't get drowned by constant WARNs.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Szyprowski, Marek" <m.szyprowski@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Fixes: 632c6e4ede ("drm/vblank: Fix flip event vblank count")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023152540.15364-1-ville.syrjala@linux.intel.com
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the partial tiling tests are poking into the GGTT to watch the
fence registers in operation, it itself needs the device rpm wakeref in
order for the GGTT to remain accessible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107115653.10716-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
The vma routines are responsible for acquiring the device rpm wakeref
before they poke the HW. However, some of the selftests bypass the
higher level vma routines in order to poke directly at the lowlevel GGTT
functions; these are then responsible for managing rpm themselves.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107114051.10583-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
If we only have 4k pages, we can't mix together different combinations
of hugepages to see if the world burns. However, as the loops did
nothing, we never set err to 0 and reported ENODEV aborting the test.
Teach the test to skip instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107110559.6098-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Smatch warns of
drivers/gpu/drm/i915/intel_pm.c:1161 g4x_compute_wm() warn: signedness bug returning '(-33554430)'
which is a result of it believing that wm may be INT_MAX following
g4x_tlb_miss_wa(). Just declaring g4x_tlb_miss_wa() as returning an
unsigned integer is not sufficient, we need to tell smatch that wm itself
is unsigned for it to not worry. So mark up the locals we expect to be
non-negative, and so silence smatch.
v2: Mark up vlv_compute_wm_level() as unsigned similarly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171107140338.13748-1-chris@chris-wilson.co.uk
Older compilers (gcc-4.9) are not as able to track uninitialised
variables as well as more recent compilers. In particular,
drivers/gpu/drm/i915/intel_dpio_phy.c: In function ‘bxt_ddi_phy_init’:
drivers/gpu/drm/i915/intel_dpio_phy.c:482:25: warning: ‘was_enabled’ may be used uninitialized in this function [-Wmaybe-uninitialized]
In this case, we can rearrange code slightly to make the control flow
clearer to the reader, as well as the compiler. That is we only call
uninit using the same predicate as calling init
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107135324.28300-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
gcc-4.7 is not very smart and can not tell that "si" is guarded by size
being 0. So it complains,
drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’:
drivers/gpu/drm/i915/intel_csr.c:204:3: warning: ‘si’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_csr.c:190:30: note: ‘si’ was declared in
Give in and mark si as NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107145334.27154-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
If we move the shift into each case not only do we kill the warning from
smatch, but we shrink the code slightly:
text data bss dec hex filename
1267906 20587 3168 1291661 13b58d before
1267890 20587 3168 1291645 13b57d after
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107154055.19460-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Build-testing on randconfig kernels revealed a dependency in the
newly added lvds sub-driver:
drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_bind':
drivers/gpu/drm/rockchip/rockchip_lvds.c:380:24: error: 'struct drm_bridge' has no member named 'of_node'
remote = lvds->bridge->of_node;
We could work around that in the code, adding a Kconfig dependency
seems easier.
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106135852.1355487-1-arnd@arndb.de
Capturing and cleanup and modparams in error state requires
some macro tricks. Move that code into separated functions
for easier maintenance.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-3-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We keep details of GuC and HuC in separate error state struct.
Make GuC log part of it to group all related data together.
Since we are printing uC details at the end, with this change
GuC log will be moved there too.
v2: comment on new placement of the log (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-2-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Include GuC and HuC firmware details in captured error state
to provide additional debug information. To reuse existing
uc firmware pretty printer, introduce new drm-printer variant
that works with our i915_error_state_buf output. Also update
uc firmware pretty printer to accept const input.
v2: don't rely on current caps (Chris)
dump correct fw info (Michal)
v3: simplify capture of custom paths (Chris)
v4: improve 'why' comment (Joonas)
trim output if no fw path (Michal)
group code around uc error state (Michal)
v5: use error in cleanup_uc (Michal)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-1-michal.wajdeczko@intel.com
[ickle: allow printing uc_fw after allocation failure]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that ctch->vma is allocated
following a successful chch_init()
drivers/gpu/drm/i915/intel_guc_ct.c:204 ctch_open() error:
we previously assumed 'ctch->vma' could be null (see line 197)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106135154.52520-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that guc->stage_desc_pool is allocated
following a successful guc_stage_desc_pool_create(),
drivers/gpu/drm/i915/i915_guc_submission.c:1293 i915_guc_submission_init() error: we previously assumed 'guc->stage_desc_pool' could be null (see line 1261)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106114833.31199-1-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
As we bind, and unbind on error, we want to be sure that the vma->flags
are updated to reflect the binding state so that on the next invocation
all is well.
v2: Take two.
v3: Take three; vma-misplaced is checking map-and-fenceable so keep it
last!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171105124550.32715-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
some more amd/ttm fixes.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Downgrade pr_err to pr_debug for memory allocation failures
drm/ttm: Always and only destroy bo->ttm_resv in ttm_bo_release_list
drm/amd/amdgpu: Enabling ACP clock in hw_init (v2)
drm/amdgpu/virt: don't dereference undefined 'module' struct
Memory allocation failure should generally be handled gracefully by
callers. In particular, with transparent hugepage support, attempts
to allocate huge pages can fail under memory pressure, but the callers
fall back to allocating individual pages instead. In that case, there
would be spurious
[TTM] Unable to get page %u
error messages in dmesg.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a use-after-free due to a race condition in
ttm_bo_cleanup_refs_and_unlock, which allows one task to reserve a BO
and destroy its ttm_resv while another task is waiting for it to signal
in reservation_object_wait_timeout_rcu.
v2:
* Always initialize bo->ttm_resv in ttm_bo_init_reserved
(Christian König)
Fixes: 0d2bd2ae04 "drm/ttm: fix memory leak while individualizing BOs"
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> # v1
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling of ACP in hw_init does away with requirement of order
of probe on designware_i2s and acp dma driver. designware_i2s
reads i2s registers and this use to fail if acp dma driver was not probed
prior to it.
BUG=🅱️62103837
TEST=modprobe snd-soc-acp-pcm
modprobe snd-soc-acp-rt5645-mach
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: acprt5650 [acprt5650], device 0: RT5645_AIF1 rt5645-aif1-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
v2: use proper device in dev_err to fix warnings (Alex)
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-on: https://chromium-review.googlesource.com/670207
Reviewed-by: Jason Clinton <jclinton@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/676628
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
-----BEGIN PGP SIGNATURE-----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=fQeu
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
This time really the last i915 batch for v4.15:
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
* tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171023
drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
drm/i915: Let's use more enum intel_dpll_id pll_id.
drm/i915: Use existing DSI backlight ports info
drm/i915: Parse DSI backlight/cabc ports.
drm/i915: Skip waking the device to service pwrite
drm/i915/crt: split compute_config hook by platforms
drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
drm/i915: Unify error handling for missing DDI buf trans tables
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
drm/i915: Kill off the BXT buf_trans default_index
drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly
drm/i915: Integrate BXT into intel_ddi_dp_voltage_max()
drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers()
drm/i915: Pass the encoder type explicitly to skl_set_iboost()
drm/i915: Extract intel_ddi_get_buf_trans_hdmi()
drm/i915: Relocate intel_ddi_get_buf_trans_*() functions
drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
...
vc4->purgeable.size and vc4->purgeable.purged_size are size_t fields
and should be printed with a %zd specifier.
Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101095731.14878-1-boris.brezillon@free-electrons.com
(cherry picked from commit 50f365cde4)
Signed-off-by: Eric Anholt <eric@anholt.net>
Accessing the THIS_MODULE directly is only possible when modules
are enabled, otherwise we get a build failure:
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange':
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module'
Further, THIS_MODULE is NULL when the driver is built-in, so the
code would likely cause a NULL pointer dereference.
This adds an #ifdef check to avoid the compile-time error, plus
a NULL pointer check before dereferencing THIS_MODULE. It might
be better to find a way to avoid using the module version
altogether.
Fixes: 2dc8f81e4f ("drm/amdgpu: SR-IOV data exchange between PF&VF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
After a reset, we may immediately begin executing requests on restarting
the engines. Ergo this has to be last step with all re-initialisation
completed beforehand. The mocs setup was after we started executing the
requests; do it earlier!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102131430.22328-1-chris@chris-wilson.co.uk
GEM_BUG_ON if the packed bits do not fit into the specified width.
v2: Avoid using the macro argument twice.
v3: Drop unnecessary braces. (Joonas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103090538.14474-1-tvrtko.ursulin@linux.intel.com
We have to reject unknown flags for uAPI considerations, and also
because the curent implementation limits their i915 storage space
to two bits.
v2: (Chris Wilson)
* Fix fail in ABI check.
* Added unknown flags and BUILD_BUG_ON.
v3:
* Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: cf6e7bac63 ("drm/i915: Add support for drm syncobjs")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com
nouveau next fixes.
Fixes arm32 build.
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/bios/timing: mark expected switch fall-throughs
drm/nouveau/devinit/nv04: mark expected switch fall-throughs
drm/nouveau/bios: make const arrays hwsq_signature and edid_sig static
drm/nouveau/core/memory: fix missing mutex unlock
drm/nouveau/mmu: swap out round for ALIGN
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1260018
Addresses-Coverity-ID: 1260019
Addresses-Coverity-ID: 1260022
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 143119
Addresses-Coverity-ID: 143120
Addresses-Coverity-ID: 143121
Addresses-Coverity-ID: 143122
Addresses-Coverity-ID: 143123
Addresses-Coverity-ID: 143124
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Don't populate arrays hwsq_signature and edid_sig on the stack but
instead make them static. Makes the object code smaller by over 190
bytes:
Before:
text data bss dec hex filename
35676 3312 64 39052 988c nouveau_bios.o
After:
text data bss dec hex filename
35319 3472 64 38855 97c7 nouveau_bios.o
(gcc version 7.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- Usermode Events
The current events code implemented some data structures (waitqueue, fifo)
that were already implemented in the kernel. The patches below addresses
this issue by replacing them with the standard kernel implementation.
In addition, they simplify allocation of events IDs and memory for the events.
The patches also increase the maximum number of events while maintaining
compatibility with the older userspace library.
- Remove radeon support
Because Kaveri is fully supported in amdgpu and because current and future
versions of userspace libraries will only support amdgpu, we removed radeon
support from kfd. Current users can move to amdgpu while using the same
userspace libraries.
- Various bug fixes and cleanups
* tag 'drm-amdkfd-next-2017-11-02' of git://people.freedesktop.org/~gabbayo/linux: (26 commits)
drm/amdkfd: Minor cleanups
drm/amdkfd: Update queue_count before mapping queues
drm/amdkfd: Cleanup DQM ASIC-specific ops
drm/amdkfd: Register/Deregister process on qpd resolution
drm/amdkfd: Fix debug unregister procedure on process termination
drm/amdkfd: Avoid calling amd_iommu_unbind_pasid() when suspending
drm/amdkfd: Disable CP/SDMA ring/doorbell in MQD
drm/amdkfd: Clean up the data structure in kfd_process
drm/radeon: deprecate and remove KFD interface
drm/amdkfd: use a high priority workqueue for IH work
drm/amdkfd: wait only for IH work on IH exit
drm/amdkfd: increase IH num entries to 8192
drm/amdkfd: use standard kernel kfifo for IH
drm/amdkfd: increase limit of signal events to 4096 per process
drm/amdkfd: Make event limit dependent on user mode mapping size
drm/amdkfd: Use IH context ID for signal lookup
drm/amdkfd: Simplify event ID and signal slot management
drm/amdkfd: Simplify events page allocator
drm/amdkfd: Use wait_queue_t to implement event waiting
drm/amdkfd: remove redundant kfd_event_waiter.input_index
...
Some amdgpu/ttm fixes.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: wrong control mode cause the fan spins faster unnecessarily
drm/amd/powerplay: fix memory leak of hardcoded pptable
drm/amdgpu:add fw-vram-usage for atomfirmware
drm/radeon: fix atombios on big endian
drm/ttm:fix memory leak due to individualize
drm/amdgpu: fix error handling in amdgpu_bo_do_create
drm/ttm: once more fix ttm_buffer_object_transfer
drm/amd/powerplay: change ASIC temperature reading on Vega10
Because dev_priv is 0-ed it's not currently an issue, but since we
have dev_priv->perf.oa.test_config.uuid size at uuid + 1, we could
just copy the null character.
v2: Use strlcpy instead of strncpy (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102121827.436-1-lionel.g.landwerlin@intel.com
There is a possibility on gen9 hardware to miss the forcewake ack
message. The recommended workaround is to use another free
bit and toggle it until original bit is successfully acknowledged.
Some future gen9 revs might or might not fix the underlying issue but
using fallback forcewake bit dance can be considered as harmless:
without the ack timeout we never reach the fallback bit forcewake.
Thus as of now we adopt a blanket approach for all gen9 and leave
the bypassing the fallback bit approach for future patches if
corresponding hw revisions do appear.
Commit 83e3337204 ("drm/i915: Increase maximum polling time to 50ms
for forcewake request/clear ack") did increase the forcewake timeout.
If the issue was a delayed ack, future work could include finding
a suitable timeout value both for primary ack and reserve toggle
to reduce the worst case latency.
v2: use bit 15, naming, comment (Chris), only wait fallback ack
v3: fix return on fallback, backoff after fallback write (Chris)
v4: udelay on first pass, grammar (Chris)
v4: s/reserve/fallback
References: HSDES #1604254524
References: https://bugs.freedesktop.org/show_bug.cgi?id=102051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102094836.2506-1-mika.kuoppala@linux.intel.com
This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.
In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.
Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.
v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.
v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)
v4: Rebase.
v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.
v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_guc_reset sounds more like the microcontroller is the one performing
a reset, while in this case is the opposite. intel_reset_guc not only
makes it clearer, it follows the other intel_reset functions available.
v2: Print error message in English (Tvrtko).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030185616.32836-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If GuC firmware performs an engine reset while that engine had a
preemption pending, it will set the terminated attribute bit on our
preemption stage descriptor. GuC firmware retains all pending work
items for a high-priority GuC client, unlike the normal-priority GuC
client where work items are dropped. It wants to make sure the preempt-
to-idle work doesn't run when scheduling resumes, and uses this bit to
inform its scheduler and presumably us as well. Our job is to clear it
for the next preemption after reset, otherwise that and future
preemptions will never complete. We'll just clear it every time.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101221630.25086-1-jeff.mcgee@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
VMAs are about to not take references on the VMM they belong to, which
means more care is required when handling delayed unmapping.
Queuing it on the client workqueue ensures all pending VMA unmaps will
have completed before the VMM is destroyed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is already handled in the top-level gem_new() ioctl in another manner,
but this will be removed in a future commit.
Ideally we'd not need to check up-front at all, and let the VMM code handle
error checking, but there are paths in the current BO management code where
this isn't possible due to map() not always being called during BO creation,
and map() calls not being allowed to fail during buffer migration.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the VMA is being deleted, we don't need to explicity unmap first
anymore. The MMU code will automatically merge the operations into
a single page tree walk.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These are the new priviledged interfaces to the VMM backends, and expose
some functionality that wasn't previously available.
It's now possible to allocate a chunk of address-space (even all of it),
without causing page tables to be allocated up-front, and then map into
it at arbitrary locations. This is the basic primitive used to support
features such as sparse mapping, or to allow userspace control over its
own address-space, or HMM (where the GPU driver isn't in control of the
address-space layout).
Rather than being tied to a subtle combination of memory object and VMA
properties, arguments that control map flags (ro, kind, etc) are passed
explicitly at map time.
The compatibility hacks to implement the old frontend on top of the new
driver backends have been replaced with something similar to implement
the old frontend's interfaces on top of the new frontend.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB/2MiB big page sizes (128KiB not supported by HW with new PT layout).
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
- Sparse PDEs/PTEs.
- Additional blocklinear kinds.
- 49-bit address-space.
GP100 supports an entirely new 5-level page table layout that provides
an expanded 49-bit address-space. It also supports the layout present
on previous generations, which we've been making do with until now.
This commit implements support for the new layout, and enables it by
default.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB big page size.
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
Adds support for marking LPTEs invalid, resulting in the corresponding
SPTEs being ignored, which is supposed to speed up TLB invalidates.
On The Tegra side, this will switch to using the video memory aperture
for all mappings. The HW will still target non-coherent system memory,
but this aperture needs to be selected in order to support compression.
Tegra's instmem backend somewhat cheated to get this effect previously.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the common code to support a rework of the VMM backends.
It adds support for more than 2 levels of page table nesting, which
is required to be able to support GP100's MMU layout.
Sparse mappings (that don't cause MMU faults when accessed) are now
supported, where the backend provides it.
Dual-PT handling had to become more sophisticated to support sparse,
but this also allows us to support an optimisation the MMU provides
on GK104 and newer.
Certain operations can now be combined into a single page tree walk
to avoid some overhead, but also enables optimsations like skipping
PTE unmap writes when the PT will be destroyed anyway.
The old backend has been hacked up to forward requests onto the new
backend, if present, so that it's possible to bisect between issues
in the backend changes vs the upcoming frontend changes.
Until the new frontend has been merged, new backends will leak BAR2
page tables on module unload. This is expected, and it's not worth
the effort of hacking around this as it doesn't effect runtime.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
To avoid wasting compression tags when using 64KiB pages, we need to
enable this so we can select between upper/lower comptagline in PTEs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If NV_PFB_MMU_CTRL_USE_FULL_COMP_TAG_LINE is TRUE, then the last bit of
NV_MMU_PTE_COMPTAGLINE is re-purposed to select the upper/lower half of
a compression tag when using 64KiB big pages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.
It makes more sense to handle this in a common location.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- Selection of old/new-style page table layout (GP100MmuLayout=0/1).
- System-memory PDs.
New layout disabled by default for the moment, as we don't have a
backend that can handle it yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the first chunk of the new VMM code that provides the structures
needed to describe a GPU virtual address-space layout, as well as common
interfaces to handle VMM creation, and connecting instances to a VMM.
The constructor now allocates the PD itself, rather than having the user
handle that manually. This won't/can't be used until after all backends
have been ported to these interfaces, so a little bit of memory will be
wasted on Fermi and newer for a couple of commits in the series.
Compatibility has been hacked into the old code to allow each GPU backend
to be ported individually.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP100 "big" (which is a funny name, when it supports "even bigger") page
tables are small enough that we want to be able to suballocate them from
a larger block of memory.
This builds on the previous page table cache interfaces so that the VMM
code doesn't need to know the difference.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Builds up and maintains a small cache of each page table size in order
to reduce the frequency of expensive allocations, particularly in the
pathological case where an address range ping-pongs between allocated
and free.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Removes the need to expose internals outside of MMU, and GP100 is both
different, and a lot harder to deal with.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will cause a subtle behaviour change on GPUs that are in mixed-memory
configurations in that VRAM in the degraded section of VRAM will no longer
be used for TTM buffer objects.
That section of VRAM is not meant to be used for displayable/compressed
surfaces, and we have no reliable way with the current interfaces to be
able to make that decision properly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Another transition step to allow finer-grained patches transitioning to
new MMU backends.
Old backends will continue operate as before (accessing nvkm_mem::tag),
and new backends will get a reference to the tags allocated here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming MMU changes use nvkm_memory as its basic representation of memory,
so we need to be able to allocate VRAM like this.
The code is basically identical to the current chipset-specific allocators,
minus support for compression tags (which will be handled elsewhere anyway).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for 64-bit writes, and optimised filling of buffers with
fixed 32/64-bit values.
These will all be used by the upcoming MMU changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We need to be able to prevent memory from being freed while it's still
mapped in a GPU's address-space.
Will be used by upcoming MMU changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Needed by VMM code to determine whether an allocation is compatible with
a given page size (ie. you can't map 4KiB system memory pages into 64KiB
GPU pages).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Map flags (access, kind, etc) are currently defined in either the VMA,
or the memory object, which turns out to not be ideal for things like
suballocated buffers, etc.
These will become per-map flags instead, so we need to support passing
these arguments in nvkm_memory_map().
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_memory is going to be used by the upcoming mmu rework for the basic
representation of a memory allocation, as such, this commit adds support
for comptag allocation to nvkm_memory.
This is very simple for now, in that it requires comptags for the entire
memory allocation even if only certain ranges are compressed.
Support for tracking ranges will be added at a later date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We're moving towards having a central place to handle comptag allocation,
and as some GPUs don't have a ram submodule (ie. Tegra), we need to move
the mm somewhere else.
It probably never belonged in ram anyways.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Lankhorst