- 64 bits is not needed for afe_clock now we don't convert
that to Hz.
- 16 bits is not enough for all dco stuff.
- unsigned is not relevant/needed for all divisors values.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-4-rodrigo.vivi@intel.com
No functional change. Just starting the wrpll fixes
with a clean-up to make units a bit more clear.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-3-rodrigo.vivi@intel.com
"Display software must leave this field at the default value.
It no longer needs to be configured as part of PLL programming."
We respect this already and we are setting up the default
one line below: "DPLL_CFGCR1_CENTRAL_FREQ".
Also we don't touch anywhere else this central_freq for cnl.
So let's remove from the final write.
No functional change. Only a clean-up patch.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-2-rodrigo.vivi@intel.com
When operating on the live_ggtt we have to find a usuable hole for our
test. It is possible for there to be no hole we can use, so initialise
the err to 0 for the early exit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115152558.31252-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Avoid touching PIPECONF in intel_sanitize_crtc() unless the pipe is
actually on. Should cure some unclaimed register accesses during reset,
as we are rather cavalier in our approach to powerdomain management.
We don't have to sanitize this if the pipe is off since we will
overwrite the frame start delay anyway when turning the pipe on.
v2: Amended commit message to implicate the reset path (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102249
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115200442.15051-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
With all component structures and functions named appropriately, change
the names of GuC submission source files. There were bunch of style issues
in guc_submission.c that are highlighted now by checkpatch. Fix those.
Update name in Documentation/gpu. (Joonas)
v2: Rebase.
v3: Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GuC submission clients are currently being used in kernel only hence
update the structure name to intel_guc_client.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-5-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
i915 GuC submission is hardware interface and GuC APIs that are not user
facing should be named intel_guc* hence we change GuC submission related
functions name prefix to intel_guc. Also changed the parameter to these
functions to intel_guc struct.
v2: Using local guc variable in intel_uc_fini_hw. (Michal Wajdeczko)
Rebase.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-4-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
i915_guc_submit, i915_guc_dequeue, i915_guc_submission_park and
i915_guc_submission_upark are functions internal to GuC submission
hence remove "i915_" prefix.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-3-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_lrc_irq_handler and i915_guc_irq_handler are HW submission related
tasklet functions. Name them with "submission_tasklet" suffix and
remove intel/i915 prefix as they are static. Also rename irq_tasklet
as just tasklet for clarity.
v2: s/_bh/_tasklet (Chris)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-2-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We check whether the multiplies will overflow prior to calling
kmalloc_array so that we can respond with -EINVAL for the invalid user
arguments rather than treating it as an -ENOMEM that would otherwise
occur. However, as Dan Carpenter pointed out, we did an addition on the
unsigned int prior to passing to kmalloc_array where it would be
promoted to size_t for the calculation, thereby allowing it to overflow
and underallocate.
v2: buffer_count is currently limited to INT_MAX because we treat it as
signaled variable for LUT_HANDLE in eb_lookup_vma
v3: Move common checks for eb1/eb2 into the same function
v4: Put the check back for nfence*sizeof(user_fence) overflow
v5: access_ok uses ULONG_MAX but kvmalloc_array uses SIZE_MAX
v6: size_t and unsigned long are not type-equivalent on 32b
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116105059.25142-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
When we call intel_engine_cancel_signaling() to stop reporting when
a request is completed via an asynchronous signal, we remove that request
from the breadcrumb wait queue. However, we may be concurrently
processing that request in the signaler itself, the actual operations on
the request's node itself are serialised but we do not actually clear the
waiter after removing it from the tree allowing both parties to attempt
to do so and corrupting the rbtree. (Previously removing from the
breadcrumb wait queue could only be done on behalf of i915_wait_request,
so this race could not happen).
Reported-by: "He, Bo" <bo.he@intel.com>
Fixes: 9eb143bbec ("drm/i915: Allow a request to be cancelled")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "He, Bo" <bo.he@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115121458.24655-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It is easier to categorize and debug bugs if the failed condition
is in plain sight in the actual dmesg output. Make it so.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116083954.3357-1-mika.kuoppala@linux.intel.com
Previously the performance is improved through the workload auditing
and shadowing ahead of vGPU scheduling, however, there is the case that
more requests are allocated in submit_context before the previous request
is added, the timeline will hold its seqno which is later.
This patch is to move the request alloc to dispatch_workload function,
where is the same place as request is added.
It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno)
check when add_request.
Fixes: 89ea20b930 ("drm/i915/gvt: Factor out scan and shadow from workload dispatch")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently every vgpu share a common gvt opregion memory, but
it is freed at vgpu destroy, then the later vgpu doesn't have
opregion memory once the first vgpu is destroyed. This cause
guest function failure like reboot, second or later boot.
This patch allocate and init virt opregion memory for each
vgpu, so this memory could be freed at vgpu destroy.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
mmio_read_from_hw() let vgpu could read hw reg, if vgpu's workload
is running on hw, things is good. Otherwise vgpu will get other
vgpu's reg val, it is unsafe.
This patch limit such hw access to active vgpu. If vgpu isn't
running on hw, the reg read of this vgpu will get the last active
val which saved at schedule_out.
v2: ring timestamp is walking continuously even if the ring is idle.
so read hw directly. (Zhenyu)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This reverts commit b20d09886fd1b74cd2255d846029a049e524db14.
This caused windows driver boot errors for invalid page address.
Revert for now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.
Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)
I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
I have seen the cmd parser dump partial odd info. Stop that and only dump
the full verbose info when debug enabled.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Use I915_WRITE_FW instead of I915_WRITE to reduce overhead.
The overall mmio switch latency lowers from ~600us to ~180us.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This new debugfs entry is used to figure out which registers of vGPU
is different to host. It is a useful tool for new platform enabling
and debugging. When read this entry, all the diff mmio are recognized
and sorted by mmio offset. Besides, the bit positions of different
value are listed in 'Diff' column. Here is a show:
$ sudo cat ./mmio_diff
Offset HW vGPU Diff
00002030 000025f8 00000000 3-8,10,13
00002034 012025f8 00000000 3-8,10,13,21,24
00002038 027fb000 00000000 12-13,15-22,25
0000203c 00003000 00000000 12-13
00002054 0000000a 00000040 1,3,6
00002074 012025f8 00000000 3-8,10,13,21,24
00002080 fffe6000 00000000 13-14,17-31
000020a8 fffffeff ffffffff 8
000020d4 00000004 00000000 2
....
00145974 eb42718c 010c11b0 2-5,13-14,17-19,22,25,27,29-31
00145978 0000002f 0000002a 0,2
0014597c 0000002f 0000002a 0,2
00145980 0000002b 00000028 0-1
00145984 a5a87c9e b27d20c0 1-4,6,10-12,14,16,18,20,22-26,28
001459c0 88390000 883c0000 16,18
00146200 88350000 883a0000 16-19
Total: 72432, Diff: 901
v3: fix a typo.
v2: add mmio_hw_access_pre/post().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch add a function intel_gvt_for_each_tracked_mmio() to
iterate each tracked mmio. The caller don't be aware of how the
tracked mmios are presented internally.
v2: remove snapshot_hw_mmio_registers().
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
this is an enhanced opregion emulation for win guest support
by initializing more data members including opregion header
size, version and child device propertity for display port.
for simplicity, redefined child_device_config structure.
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.
Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.
Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.
v3 : Add address audit in HWSP address update.
v4 :
Separate this patch with enalbe virtual HWSP in VM.
Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.
v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Refine previously broken PPGTT scratch. Scratch PTE was no correctly
handled and also the handling of scratch entries in page table walk was
not well organized, which brings gaps of introducing lazy shadow.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Need to figure out page table type of current level by GTT entry type
during getting a scratch page table entry.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
During a vGPU reset, the scratch page table shouldn't be cleared, what
needs to be cleared should be the scratch page.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
As we want to re-use intel_vgpu_shadow_page in buidling scrach page table
and we don't want to put scrach page table page into hash table, a new
param is introduced to give the caller a choice to decide if a shadow page
should be put into hash table.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
As there is already an I915_GTT_PAGE_SIZE marco in i915, let GVT-g use it
as well. Also this patch re-names some GTT marcos with additional prefix.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
1) Use standard i915 GEM object sequence to access the shadow batch buffer.
2) Manage i915 vma life cycle to solve one FIXME.
v2:
- Refine code structure.
- Refine the usage of GEM APIs.
- Add the missing lock/unlock in release_shadow_batch_buffer.
Test on my SKL NuC.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Returns the error code if something is wrong and the size of batch buffer
is passed through the pointer.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
We need debugfs entry to expose some debug information of gvt and vGPUs.
The first tool will be added is mmio-diff, which help to find the
difference values of host and vGPU mmio. It's useful for platform
enabling.
This patch just add a basic debugfs infrastructure, each vGPU has its own
sub-folder. Two simple attributes are created as a template.
.
├── num_tracked_mmio
├── vgpu1
| └── active
└── vgpu2
└── active
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
all the vGPU type related code in kvmgt will be moved into
gvt.c/gvt.h files while the common vGPU type related interfaces
will be called.
v2:
- intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
gvt part. (Wang, Zhi)
Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
In this patch, all the vGPU type related code will be merged into
same gvt file and the common interface will be exposed to both
XenGT and KvmGT.
v2:
- remove the useless mdev_* gvt_ops.
add get_gvt_attr ops for MPT module.
intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
gvt part. (Wang, Zhi)
- set gvt_vgpu_type_groups[i] to NULL. (Zhang,Xiong)
Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Move clean_workloads() into scheduler.c since it's not specific to
execlist.
v2:
- Remove clean_workloads in intel_vgpu_select_submission_ops. (Zhenyu)
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Introduce vGPU submission ops to support easy switching submission mode
of one vGPU between different OSes.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Move common vGPU workload creation functions into scheduler.c since
they are not specific to execlist emulation.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Move common workload preparation into prepare_workload() in scheduler.c,
as they are not specific to execlist emulation.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
It's better enable/disable and classify gvt debug info dynamically.
This patch change it to dyndbg so can be dynamically enable/disable
each item. All gvt log can be enabled by,
$ echo 'file *gvt* +p' > /sys/kernel/debug/dynamic_debug/control
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
An earlier fix changed the return type from find_bb_size however the
integer return is being assigned to a unsigned int so the -ve error
check will never be detected. Make bb_size an int to fix this.
Detected by CoverityScan CID#1456886 ("Unsigned compared against 0")
Fixes: 1e3197d6ad ("drm/i915/gvt: Refine error handling for perform_bb_shadow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When a scan error occurs in submit_context, this patch is to
decrease the mm ref count and free the workload struct before
the workload is abandoned.
v2:
- submit_context related code should be combined together. (Zhenyu)
v3:
- free all the unsubmitted workloads. (Zhenyu)
v4:
- refine the clean path. (Zhenyu)
v5:
- polish the title. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When a scan error occurs in dispatch_workload, this patch is to
check the healthy state and free all the queued workloads before
the failsafe mode is entered.
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Generally, there are 3 types of errors during command scan: a) some
commands might be unknown with EBADRQC; b) some cmd access invalid
address with EFAULT; c) some unexpected force nonpriv cmd with EPERM.
later the healthy state can be judged through the return error.
v2:
- remove some internal i915 errors rating. (Zhenyu)
v3:
- the healthy state is judged through the internal defined return
error. (Zhenyu)
- force non priv cmd error can be ignored. (Kevin)
v4:
- reuse standard defined errno instead of recreate, e.g EBADRQC for
unknown cmd, EFAULT for invalid address, EPERM for nonpriv. (Zhenyu)
v5:
- remove some irrelevant code for the patch.
- fix typo of vgpu_is_vm_unhealthy. (Zhenyu)
v6:
- move the healthy check and failsafe code into another patch. (Zhenyu)
v7:
- polish title and commit message. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Theoretically, the largest bulk of commands in the ring buffer of an
engine might be the first submission, which usually contains a lot
of commands to initialize the HW. After removing the initial allocation
of the ring scan buffer and let krealloc() do everything we need, we
still have a big chance to get the buffer of suitable size in the first
submission.
Tested on my SKL NUC.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Move ring scan buffers into intel_vgpu_submission since they belongs to
a part of vGPU submission stuffs.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
"reserved" means reserve something from somewhere. Actually they are
buffers used by command scanner. Rename it to ring_scan_buffer.
v2:
- Remove the usage of an extra variable. (Zhenyu)
Fixes: 0a53bc07f0 ("drm/i915/gvt: Separate cmd scan from request allocation")
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Move vGPU workload cache initialization/de-initialization into
intel_vgpu_{setup, clean}_submission() since they are not specific to
execlist stuffs.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
To move workload related functions into scheduler.c, an expected way is
to collect all the init/clean functions related to vGPU workload
submission into fewer functions.
Rename intel_vgpu_{init, clean}_gvt_context() for above usage in future.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
The context descriptors in elsp_dwords are stored in a reversed order and
the definition of context descriptor is also reversed. The revesred stuff
is hard to be used and might cause misunderstanding. Make them in the right
oder for following code re-factoring.
Tested on my SKL NUC.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
opregion emulated with a copy from host which leads to some display
bugs such as guest resolution adjustment failure due to host opregion
fail to claim port D support. with a fake opregion table provided
to fully emulate opregion to meet guest port requirement.
v1 - initial patch
v2 - reforamt opregion arrary with 0x02x output
v3 - opregion array removed with opregion generation on host initizaiton
v4 - rebased v3 patch from stable branch to staging branch which also has
different struct child_device_config and addressed v3 review comments.
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
WaEnablePooledEuFor2x6 only applies to preproduction models, unsupported
since commit 0102ba1fd8 ("drm/i915: Add early BXT sdv to the list of
preproduction machines").
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135116.30036-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
At the start of building a request, we would wait for roughly enough
space to fit the average request (to reduce the likelihood of having to
wait and abort partway through request construction). To achieve we
would try to begin a 0-length command packet, this just adds extra
confusion so make the wait-for-space explicit, as in the next patch we
want to move it from the backend to the i915_gem_request_alloc() so it
can ensure that the wait-for-space is the first operation in building a
new request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115151204.8105-2-chris@chris-wilson.co.uk
We don't actually emit any commands into the ringbuffer, so we set it
very small. However, an upcoming change centralises the wait-for-space
into i915_gem_request_alloc() and that imposes a minimum size upon all
ringbuffers (mock or real) of MIN_SPACE_FOR_ADD_REQUEST. Grow the
mock ringbuffer such that we allocate a single page for the struct+buffer,
satisfying the new condition without wasting too much space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115151204.8105-1-chris@chris-wilson.co.uk
gcc-4.7.3 is confused by the guards inside intel_ppat_get() and reports:
drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘intel_ppat_get’:
drivers/gpu/drm/i915/i915_gem_gtt.c:3044:27: warning: ‘entry’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Forgive the compiler this once, and rearrange the code so that entry is
always initialised.
v2: Flavour with a bit of NULL (instead of ERR_PTR(-ENOSPC))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115131705.16341-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
While I have no solid proof that ILK follows the ELK path when it
comes to the stolen memory reserved area, there are some hints that
it might be the case. Unfortunately my ILK doesn't have this enabled,
and no way to enable it via the BIOS it seems.
So let's have ILK use the ELK code path, and let's toss in a WARN
into the code to see if we catch anyone with an ILK that has this
enabled to further analyze the situation.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-3-ville.syrjala@linux.intel.com
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Now that we should be properly filtering out the cases when the stolen
reserved area is disabled, let's convert the debug message about a
misplaced reserved area into an error.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-2-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Apparently there are some machines that put semi-sensible looking values
into the stolen "reserved" base and size, except those values are actually
outside the stolen memory. There is a bit in the register which
supposedly could tell us whether the reserved area is even enabled or
not. Let's check for that before we go trusting the base and size.
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fix copy/paste fail in kerneldocs for intel_audio_codec_disable().
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191127.16188-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Quoting Ville: "the forcewake timer might still be active until the uncore
suspend, and having active forcewakes while we've already told the GT wake
stuff to stop acting normally doesn't seem quite right to me."
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135518.15981-3-hdegoede@redhat.com
intel_uncore_suspend() unregisters the uncore code's PMIC bus access
notifier and gets called on both normal and runtime suspend.
intel_uncore_resume_early() re-registers the notifier, but only on
normal resume. Add a new intel_uncore_runtime_resume() function which
only re-registers the notifier and call that on runtime resume.
Cc: stable@vger.kernel.org
Reported-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135518.15981-2-hdegoede@redhat.com
assert_rpm_wakelock_held is triggered from i915_pmic_bus_access_notifier
even though it gets unregistered on (runtime) suspend, this is caused
by a race happening under the following circumstances:
intel_runtime_pm_put does:
atomic_dec(&dev_priv->pm.wakeref_count);
pm_runtime_mark_last_busy(kdev);
pm_runtime_put_autosuspend(kdev);
And pm_runtime_put_autosuspend calls intel_runtime_suspend from
a workqueue, so there is ample of time between the atomic_dec() and
intel_runtime_suspend() unregistering the notifier. If the notifier
gets called in this windowd assert_rpm_wakelock_held falsely triggers
(at this point we're not runtime-suspended yet).
This commit adds disable_rpm_wakeref_asserts and
enable_rpm_wakeref_asserts calls around the
intel_uncore_forcewake_get(FORCEWAKE_ALL) call in
i915_pmic_bus_access_notifier fixing the false-positive WARN_ON.
Changes in v2:
-Reword comment explaining why disabling the wakeref asserts is
ok and necessary
Cc: stable@vger.kernel.org
Reported-by: FKr <bugs-freedesktop@ubermail.me>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110150301.9601-2-hdegoede@redhat.com
smatch does not track initialised values as well as gcc, and this
triggers many warnings by smatch not presented by gcc. Silence smatch by
initialising the error values to -ENODEV, which we use to denote
internal errors. (If we see a selftest fail with a silent -ENODEV, we
know smatch was right!)
v2: smatch was right about igt_create_vma(), it may unlikely fail on the
first object allocation which we want to be loud about.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114223346.25958-1-chris@chris-wilson.co.uk
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Resuming GEM presumes it can talk to hw, in particular to ensure the
kernel context is loaded upon resume for powersaving. If the GuC is
still asleep at this point, we upset the HW. Rearrange the resume such
that we restore the original order of init-hw, resume-guc, use-gem.
Fixes: 37cd33006d ("drm/i915: Remove redundant intel_autoenable_gt_powersave()")
References: a1c4199414 ("drm/i915/guc: Add host2guc notification for suspend and resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114130300.25677-2-chris@chris-wilson.co.uk
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Display is not sending a PMRsp when a PMReq is received
at the same time that all planes are turned off.
State machine in the dcprunit is stuck in the WAIT4DONE
state which means that there is no fill_done.
WA: disable arbiter clock gating, set bit [27] of 0x46530
v2: As Ville pointed out, based on the description the issue
can happen when disabling the planes, similar to
WaRsPkgCStateDisplayPMReq:hsw
Also description of the issue was updated on commit
message to make it more clear that we need this
earlier.
v3: Restore comment about possibility to system hang
to where we are sure about it, without speculation. (Ville).
v4: Remove doubled sob. Actually do v3 changes :/
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171111000319.5040-1-rodrigo.vivi@intel.com
Having removed the preproduction Broxton support (see commit 0102ba1fd8
("drm/i915: Add early BXT sdv to the list of preproduction machines")),
we know we then always need the production Broxton workaround set and do
not need a predicate upon revision.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114134340.5439-2-chris@chris-wilson.co.uk
gem_workarounds reports that the SLICE_UNIT_LEVEL_CLKGATE write isn't
sticking. Commit 0a60797a0e ("drm/i915: Implement
ReadHitWriteOnlyDisable.") presumes that SLICE_UNIT_LEVEL_CLKGATE is a
masked register in the context image, but commit 90007bca61
("drm/i915/cnl: Introduce initial Cannonlake Workarounds.") lists it as
an ordering unmasked register. The masked write will be losing the
default settings if we trust the original commit. That gem_workarounds
reports the value is lost entirely is more worrying though -- but it
clearly suggests that it is not a masked register in the context image,
so unify both w/a to use the original rmw.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103705
Fixes: 0a60797a0e ("drm/i915: Implement ReadHitWriteOnlyDisable.")
References: 90007bca61 ("drm/i915/cnl: Introduce initial Cannonlake Workarounds.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171111100336.11020-1-chris@chris-wilson.co.uk
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/i915/i915.ko] undefined!
Store the frequency in kHz and drop 64bit divisions.
v2: Use div64_u64 (Matthew)
v3: store frequency in kHz to avoid 64bit divs (Chris/Ville)
Fixes: dab9178333 ("drm/i915: expose command stream timestamp frequency to userspace")
Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-3-lionel.g.landwerlin@intel.com
Reviewed-by: Ewelina Musial <ewelina.musial@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
To make looping through transcoders in intel_ddi.c more generic, let's switch
to use 'for_each_pipe()' macro to do this.
v2: Add a notion that we are dealing with transcoders instead of pipes (Jani)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510216670-16848-1-git-send-email-mika.kahola@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Since GLK, some plane configuration settings have moved to the
PLANE_COLOR_CTL register. Refactor handling of the register to work like
PLANE_CTL. This also allows us to fix the set/read of the plane Alpha
Mode for GLK+.
v2: Adjust ordering of platform checks to be newest->oldest, drop
redundant comment about alpha blending. (Ville)
v3: Move Alpha Mode bits out of skl_plane_ctl_format into
skl_plane_ctl_alpha, and drop glk_plane_ctl_format, drop initialization
of state->color_ctl on platforms that don't use it, and drop color_ctl
local var. (Ville)
v4: Consolidate skl_plane_ctl_format switch statement on formats that
return the same settings. (Ville)
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113181128.2926-1-james.ausmus@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
GEM proxy is a kind of GEM, whose backing physical memory is pinned
and produced by guest VM and is used by host as read only. With GEM
proxy, host is able to access guest physical memory through GEM object
interface. As GEM proxy is such a special kind of GEM, a new flag
I915_GEM_OBJECT_IS_PROXY is introduced to ban host from changing the
backing storage of GEM proxy.
v3:
- update "Reviewed-by". (Joonas)
v2:
- return -ENXIO when pin and map pages of GEM proxy to kernel space.
(Chris)
Here are the histories of this patch in "Dma-buf support for Gvt-g"
patch-set:
v14:
- return -ENXIO when gem proxy object is banned by ioctl.
(Chris) (Daniel)
v13:
- add comments to GEM proxy. (Chris)
- don't ban GEM proxy in i915_gem_sw_finish_ioctl. (Chris)
- check GEM proxy bar after finishing i915_gem_object_wait. (Chris)
- remove GEM proxy bar in i915_gem_madvise_ioctl.
v6:
- add gem proxy barrier in the following ioctls. (Chris)
i915_gem_set_caching_ioctl
i915_gem_set_domain_ioctl
i915_gem_sw_finish_ioctl
i915_gem_set_tiling_ioctl
i915_gem_madvise_ioctl
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1510555798-21079-2-git-send-email-tina.zhang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114102513.22269-2-chris@chris-wilson.co.uk
-ENXIO should be returned when operations are banned from changing
backing storage of objects without backing storage.
v4:
- update "Reviewed-by". (Joonas)
v3:
- separate this patch from "Introduce GEM proxy" patch-set. (Joonas)
v2:
- update the patch description and subject to just mention objects w/o
backing storage, instead of "GEM proxy". (Joonas)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1510555798-21079-1-git-send-email-tina.zhang@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114102513.22269-1-chris@chris-wilson.co.uk
Commit 7859799637 (drm/i915/bxt: Fix PPS lost state after suspend
breaking eDP link training) renamed the function to
intel_power_sequencer_reset() but forgot to update comment.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114004638.5186-1-lucas.demarchi@intel.com
. It moves mode setup and plane update code to commit
like other CRTC drivers
. It makes mode commit to be called in enable callback only one time
. some cleanup and fixup to HDMI and Mixer drivers.
. It adds 1024x768, 1280x1024 and 1366x768 modes support
- Added HDMI audio interface driver
. As of now, HDMI audio worked on boards with external audio codec connected
in parallel with the HDMI audio transmitter's I2S interface.
This patch is required to support HDMI audio properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wpjH
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Improved HDMI and Mixer drivers
. It moves mode setup and plane update code to commit
like other CRTC drivers
. It makes mode commit to be called in enable callback only one time
. some cleanup and fixup to HDMI and Mixer drivers.
. It adds 1024x768, 1280x1024 and 1366x768 modes support
- Added HDMI audio interface driver
. As of now, HDMI audio worked on boards with external audio codec connected
in parallel with the HDMI audio transmitter's I2S interface.
This patch is required to support HDMI audio properly.
* tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: Add driver for HDMI audio interface
drm/exynos/hdmi: add 85.5MHz pixel clock for v14 HDMI PHY
drm/exynos/mixer: enable support for 1024x768 and 1280x1024 modes
drm/exynos/hdmi: quirk for support mode timings conversion
drm/exynos/mixer: pass actual mode on MIXER to encoder
drm/exynos: add mode_fixup callback to exynos_drm_crtc_ops
drm/exynos/hdmi: remove redundant mode field
drm/exynos/mixer: remove mixer_resources sub-structure
drm/exynos/mixer: fix mode validation code
drm/exynos/mixer: move resolution configuration to single function
drm/exynos/mixer: move mode commit to enable callback
drm/exynos/mixer: abstract out output mode setup code
This is a shared tree between drm and audio for some amd bits.
* 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu Moving amdgpu asic types to a separate file
ASoC: AMD: Added asic_type as ACP DMA driver platform data
drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAloJ8gUACgkQlvcN/ahK
BwruCAf/afFM64VPaMhYwl5ejfDHs39TuahlOPZ2/wx8ABdk9y5RVtidoi5grk7a
KSJcR0jPMeCnhWmEod2nEADtIxOvyq30EdttGX/OGWv0ydTqb5peCbYbc7H3J1N/
nCdHDygC6a3/0/mFuTVNnKMhiggPmbBZKjFiXMv8t2GQXJd1iDn4WS1A8JoL3zE3
Ey4ZV+m7dsm1fQB5B+/84zG34SeqQ7N7sUHm3N9DUGXgfCfbodvb8uKfh4DB8dIU
JOXiD60GGZ21HhEdZWcVleZLfNoM6tAHD6q6g8mrPAmUM60Naf0THQrnVH8xNONc
B1v53iQrqxjF9O/oMpycc1dGXxbnRA==
=cz6U
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
- rockchip: Convert psr spinlock to mutex (Emil)
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
* tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc:
drm/rockchip: analogix_dp: Use mutex rather than spinlock
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFWWmW3ewYy4RJOWc05gHnSar7m8FAloFp5MACgkQ05gHnSar
7m+ANQ//bTlW1dQcGIl5oVZOmpfYLJdzMf+bczUyH0J83uuZCUAqztuOTeIWaP1Z
Vq7NXErgrMzLvoTWHUl3zdwesUZ9M4qIv1L3wdpkn14Sk7Hqg6gmjF7+D/oedg71
9H5Y3iY6DJz1loDpv9gvLHqa/ErbnvApoKKFUNMfLavzMEpGk/iUi9N+ZoqHAf+V
PscyPRjeq2kZKOS0W1kFlol5MLvvQ/LPJF4mrP2CU38SKfJiR1QOmsd342j9fIOg
vid3Q4y079qX0gdrirEjpIjtMJznVjhdB3WlmOSNksDE7MuYLgKLlGW/vxX4ajQ1
eD4efgRoPRCBG3y8itjmnvN5aU5A5jIaTnWsc6VoIxUiSrmLKfbe7D/54VVTxVIS
qnWNLa3RR87C3UILvMhUzkTRhZi8Dw0wq4vq5/ZF6TwXgjdBqocd/NKDULCSTZET
vSHRCSsjlDbGTuFL3mOL5i0h92hsMMWbzw1JaPZgDLguCjH9zUEBjVgkYzHtO9s+
HXyp71/f+xdJdNQX4AxRCVvbItvVVSZTo2NhUPeyxWFt9AafzzJxk2rco5rzBThE
TisAFDxq9ygvUHLatHR8ZGv9oHcesbyAQBL0ySLnopOkr/0IgkQmB8PjNncB2h7a
+P0NpsgRrlaxLX+R9qsb8OfZbL/++nFfcCKHNY4L1vg0qiwuPJI=
=crrm
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v4.15
* tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAln7GdwACgkQlvcN/ahK
BwqqiggAgZSKgZzxgu5eBepENn9RiYuShC9jZPPSlA6FUKZ+2gFXdi0Ni+6fD7OV
oDliVcQWcfQDzePWiKlgObCLNMVEpNcGbIyqwJbEY8k664hh2bQVVuB0fZiPY8nn
Oc4ExSSePrhoam+fuOLfS39xERpAtG7j2cVxnLfrUBxM6wLo9FpwmD+mUCKorO1F
iF37uPQ571dTNheQK99KDJctFu4tzm9z0Jfbne4bF10rA+02/0Ov6cW/SOwlIdQ5
bMrwHQ7NGIDtipyKNzOQO8rVC7a+afmKC7+mQd5yMEFg+7EglPe1u1mI7YyhL6Z3
G1ihIpbTUyjeE60/8epFHtOg38/5NA==
=inUI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Driver Changes:
- qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd)
* tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc:
qxl: alloc & use shadow for dumb buffers
drm/qxl: replace QXL_INFO with DRM_DEBUG_DRIVER
Until Haswell/Baytrail, the hardware used to have a per engine fault
register (e.g. 0x4094 - render fault register, 0x4194 - media fault
register and so on). But since Broadwell, all these registers were
combined into a singe one and the engine id stored in bits 14:12.
Not only we should not been reading (and writing to) registers that do
not exist, in platforms with VCS2 (SKL), the address that would belong
this engine (0x4494, VCS2_HW = 4) is already assigned to other register.
v2: use less controversial function names (Chris).
v3: make non-exported functions static, remove now obsolete check for
engine presence before posting_read (Chris).
References: IHD-OS-BDW-Vol 2c-11.15, page 75.
References: IHD-OS-SKL-Vol 2c-05.16, page 350.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113173628.11689-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
From gen6, the hardware tracks address lookup failures and we should
clear those registers upon startup to prevent false positives. However,
this was happening before we have the engines defined (intel_uncore_init())
and the for_each_engine loop was just a nop. The earliest we can call
this is inside intel_engines_init_mmio().
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171111004448.12360-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We use to have this fixed per generation, but starting with CNL userspace
cannot tell just off the PCI ID. Let's make this information available. This
is particularly useful for performance monitoring where much of the
normalization work is done using those timestamps (this include pipeline
statistics in both GL & Vulkan as well as OA reports).
v2: Use variables for 24MHz/19.2MHz values (Ewelina)
Renamed function & coding style (Sagar)
v3: Fix frequency read on Broadwell (Sagar)
Fix missing divide by 4 on <= gen4 (Sagar)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-7-lionel.g.landwerlin@intel.com
This name was added with the whitelisting of registers for building up OA
configs. It is contained in a range gen8 whitelist :
addr >= RPM_CONFIG0.reg && addr <= NOA_CONFIG(8).reg
Hence why the name isn't used anywhere.
v2: Fix register name again RPC->RCP (Matthew)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-5-lionel.g.landwerlin@intel.com
Rodrigo Vivi