Call the rxrpc_conn_retransmit_call() directly from rxrpc_input_packet()
rather than calling it via connection event handling.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Make the local endpoint and it's I/O thread hold a reference on a connected
call until that call is disconnected. Without this, we're reliant on
either the AF_RXRPC socket to hold a ref (which is dropped when the call is
released) or a queued work item to hold a ref (the work item is being
replaced with the I/O thread).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Stash the network namespace pointer in the rxrpc_local struct in addition
to a pointer to the rxrpc-specific net namespace info. Use this to remove
some places where the socket is passed as a parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
At the end of rxrpc_recvmsg(), if a call is found, the call is put and then
a trace line is emitted referencing that call in a couple of places - but
the call may have been deallocated by the time those traces happen.
Fix this by stashing the call debug_id in a variable and passing that to
the tracepoint rather than the call pointer.
Fixes: 849979051c ("rxrpc: Add a tracepoint to follow what recvmsg does")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter sayeth[1]:
The patch 5e6ef4f1017c: "rxrpc: Make the I/O thread take over the
call and local processor work" from Jan 23, 2020, leads to the
following Smatch static checker warning:
net/rxrpc/io_thread.c:283 rxrpc_input_packet()
warn: bool is not less than zero.
Fix this (for now) by changing rxrpc_new_incoming_call() to return an int
with 0 or error code rather than bool. Note that the actual return value
of rxrpc_input_packet() is currently ignored. I have a separate patch to
clean that up.
Fixes: 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and local processor work")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-December/006123.html [1]
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter sayeth[1]:
The patch 75bfdbf2fca3: "rxrpc: Implement an in-kernel rxperf server
for testing purposes" from Nov 3, 2022, leads to the following Smatch
static checker warning:
net/rxrpc/rxperf.c:337 rxperf_deliver_to_call()
error: uninitialized symbol 'ret'.
Fix this by initialising ret to 0. The value is only used for tracing
purposes in the rxperf server.
Fixes: 75bfdbf2fc ("rxrpc: Implement an in-kernel rxperf server for testing purposes")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-December/006124.html [1]
Signed-off-by: David S. Miller <davem@davemloft.net>
The rxrpc I/O thread checks to see if there's any work it needs to do, and
if not, checks kthread_should_stop() before scheduling, and if it should
stop, breaks out of the loop and tries to clean up and exit.
This can, however, race with socket destruction, wherein outstanding calls
are aborted and released from the socket and then the socket unuses the
local endpoint, causing kthread_stop() to be issued. The abort is deferred
to the I/O thread and the event can by issued between the I/O thread
checking if there's any work to be done (such as processing call aborts)
and the stop being seen.
This results in the I/O thread stopping processing of events whilst call
cleanup events are still outstanding, leading to connections or other
objects still being around and uncleaned up, which can result in assertions
being triggered, e.g.:
rxrpc: AF_RXRPC: Leaked client conn 00000000e8009865 {2}
------------[ cut here ]------------
kernel BUG at net/rxrpc/conn_client.c:64!
Fix this by retrieving the kthread_should_stop() indication, then checking
to see if there's more work to do, and going back round the loop if there
is, and breaking out of the loop only if there wasn't.
This was triggered by a syzbot test that produced some other symptom[1].
Fixes: a275da62e8 ("rxrpc: Create a per-local endpoint receive queue and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/0000000000002b4a9f05ef2b616f@google.com/ [1]
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the switched parameters on rxrpc_alloc_peer() and rxrpc_get_peer().
The ref argument and the why argument got mixed.
Fixes: 47c810a798 ("rxrpc: trace: Don't use __builtin_return_address for rxrpc_peer tracing")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that rxrpc_put_local() may call kthread_stop(), it can't be called
under spinlock as it might sleep. This can cause a problem in the peer
keepalive code in rxrpc as it tries to avoid dropping the peer_hash_lock
from the point it needs to re-add peer->keepalive_link to going round the
loop again in rxrpc_peer_keepalive_dispatch().
Fix this by just dropping the lock when we don't need it and accepting that
we'll have to take it again. This code is only called about every 20s for
each peer, so not very often.
This allows rxrpc_put_peer_unlocked() to be removed also.
If triggered, this bug produces an oops like the following, as reproduced
by a syzbot reproducer for a different oops[1]:
BUG: sleeping function called from invalid context at kernel/sched/completion.c:101
...
RCU nest depth: 0, expected: 0
3 locks held by kworker/u9:0/50:
#0: ffff88810e74a138 ((wq_completion)krxrpcd){+.+.}-{0:0}, at: process_one_work+0x294/0x636
#1: ffff8881013a7e20 ((work_completion)(&rxnet->peer_keepalive_work)){+.+.}-{0:0}, at: process_one_work+0x294/0x636
#2: ffff88817d366390 (&rxnet->peer_hash_lock){+.+.}-{2:2}, at: rxrpc_peer_keepalive_dispatch+0x2bd/0x35f
...
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x5f
__might_resched+0x2cf/0x2f2
__wait_for_common+0x87/0x1e8
kthread_stop+0x14d/0x255
rxrpc_peer_keepalive_dispatch+0x333/0x35f
rxrpc_peer_keepalive_worker+0x2e9/0x449
process_one_work+0x3c1/0x636
worker_thread+0x25f/0x359
kthread+0x1a6/0x1b5
ret_from_fork+0x1f/0x30
Fixes: a275da62e8 ("rxrpc: Create a per-local endpoint receive queue and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/0000000000002b4a9f05ef2b616f@google.com/ [1]
Signed-off-by: David S. Miller <davem@davemloft.net>
When starting a kthread, the __kthread_create_on_node() function, as called
from kthread_run(), waits for a completion to indicate that the task_struct
(or failure state) of the new kernel thread is available before continuing.
This does not wait, however, for the thread function to be invoked and,
indeed, will skip it if kthread_stop() gets called before it gets there.
If this happens, though, kthread_run() will have returned successfully,
indicating that the thread was started and returning the task_struct
pointer. The actual error indication is returned by kthread_stop().
Note that this is ambiguous, as the caller cannot tell whether the -EINTR
error code came from kthread() or from the thread function.
This was encountered in the new rxrpc I/O thread, where if the system is
being pounded hard by, say, syzbot, the check of KTHREAD_SHOULD_STOP can be
delayed long enough for kthread_stop() to get called when rxrpc releases a
socket - and this causes an oops because the I/O thread function doesn't
get started and thus doesn't remove the rxrpc_local struct from the
local_endpoints list.
Fix this by using a completion to wait for the thread to actually enter
rxrpc_io_thread(). This makes sure the thread can't be prematurely
stopped and makes sure the relied-upon cleanup is done.
Fixes: a275da62e8 ("rxrpc: Create a per-local endpoint receive queue and I/O thread")
Reported-by: syzbot+3538a6a72efa8b059c38@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/000000000000229f1505ef2b6159@google.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the propagation of the security settings from sendmsg to the rxrpc_call
struct.
Fixes: f3441d4125 ("rxrpc: Copy client call parameters into rxrpc_call earlier")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the error paths in rxrpc_do_sendmsg() doesn't unlock the call mutex
before returning. Fix it to do this.
Note that this still doesn't get rid of the checker warning:
../net/rxrpc/sendmsg.c:617:5: warning: context imbalance in 'rxrpc_do_sendmsg' - wrong count at exit
I think the interplay between the socket lock and the call's user_mutex may
be too complicated for checker to analyse, especially as
rxrpc_new_client_call_for_sendmsg(), which it calls, returns with the
call's user_mutex if successful but unconditionally drops the socket lock.
Fixes: e754eba685 ("rxrpc: Provide a cmsg to specify the amount of Tx data for a call")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
For ACKs generated inside the I/O thread, transmit the ACK at the point of
generation. Where the ACK is generated outside of the I/O thread, it's
offloaded to the I/O thread to transmit it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Fold __rxrpc_unuse_local() into rxrpc_unuse_local() as the latter is now
the only user of the former.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When we've gone for >1RTT without transmitting a packet, we should reduce
the ssthresh and cut the cwnd by half (as suggested in RFC2861 sec 3.1).
However, we may receive ACK packets in a batch and the first of these may
cut the cwnd, preventing further transmission, and each subsequent one cuts
the cwnd yet further, reducing it to the floor and killing performance.
Fix this by moving the cwnd reset to after doing the transmission and
resetting the base time such that we don't cut the cwnd by half again for
at least another RTT.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint to log when a cwnd reset occurs due to lack of
transmission on a call.
Add stat counters to count transmission underflows (ie. when we have tx
window space, but sendmsg doesn't manage to keep up), cwnd resets and
transmission failures.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
None of the spinlocks in rxrpc need a _bh annotation now as the RCU
callback routines no longer take spinlocks and the bulk of the packet
wrangling code is now run in the I/O thread, not softirq context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the functions from the call->processor and local->processor work items
into the domain of the I/O thread.
The call event processor, now called from the I/O thread, then takes over
the job of cranking the call state machine, processing incoming packets and
transmitting DATA, ACK and ABORT packets. In a future patch,
rxrpc_send_ACK() will transmit the ACK on the spot rather than queuing it
for later transmission.
The call event processor becomes purely received-skb driven. It only
transmits things in response to events. We use "pokes" to queue a dummy
skb to make it do things like start/resume transmitting data. Timer expiry
also results in pokes.
The connection event processor, becomes similar, though crypto events, such
as dealing with CHALLENGE and RESPONSE packets is offloaded to a work item
to avoid doing crypto in the I/O thread.
The local event processor is removed and VERSION response packets are
generated directly from the packet parser. Similarly, ABORTs generated in
response to protocol errors will be transmitted immediately rather than
being pushed onto a queue for later transmission.
Changes:
========
ver #2)
- Fix a couple of introduced lock context imbalances.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Extract the peer address from an incoming packet earlier, at the beginning
of rxrpc_input_packet() and thence pass a pointer to it to various
functions that use it as part of the lookup rather than doing it on several
separate paths.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Shrink the region of rxrpc_input_packet() that is covered by the RCU read
lock so that it only covers the connection and call lookup. This means
that the bits now outside of that can call sleepable functions such as
kmalloc and sendmsg.
Also take a ref on the conn or call we're going to use before we drop the
RCU read lock.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
A received skbuff needs a ref when it gets put on a call data queue or conn
packet queue, and rxrpc_input_packet() and co. jump through a lot of hoops
to avoid double-dropping the skbuff ref so that we can avoid getting a ref
when we queue the packet.
Change this so that the skbuff ref is unconditionally dropped by the caller
of rxrpc_input_packet(). An additional ref is then taken on the packet if
it is pushed onto a queue.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the RCU requirements from the peer's list of error targets so that
the error distributor can call sleeping functions.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move DATA transmission into the call processor work item. In a future
patch, this will be called from the I/O thread rather than being itsown
work item.
This will allow DATA transmission to be driven directly by incoming ACKs,
pokes and timers as those are processed.
The Tx queue is also split: The queue of packets prepared by sendmsg is now
places in call->tx_sendmsg and the packet dispatcher decants the packets
into call->tx_buffer as space becomes available in the transmission
window. This allows sendmsg to run ahead of the available space to try and
prevent an underflow in transmission.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Copy client call parameters into rxrpc_call earlier so that that can be
used to convey them to the connection code - which can then be offloaded to
the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Provide a means by which an event notification can be sent to a call such
that the I/O thread can process it rather than it being done in a separate
workqueue. This will allow a lot of locking to be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Don't use sk->sk_receive_queue.lock to guard socket state changes as the
socket mutex is sufficient.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove call->input_lock as it was only necessary to serialise access to the
state stored in the rxrpc_call struct by simultaneous softirq handlers
presenting received packets. They now dump the packets in a queue and a
single process-context handler now processes them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Move the processing of error packets into the local endpoint I/O thread,
leaving the handover from UDP to merely transfer them into the local
endpoint queue.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Split the packet input handler to make the softirq side just dump the
received packet into the local endpoint receive queue and then call the
remainder of the input function from the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Create a per-local receive queue to which, in a future patch, all incoming
packets will be directed and an I/O thread that will process those packets
and perform all transmission of packets.
Destruction of the local endpoint is also moved from the local processor
work item (which will be absorbed) to the thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Split the code that handles packet reception in softirq mode as a prelude
to moving all the packet processing beyond routing to the appropriate call
and setting up of a new call out into process context.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Currently, rxrpc gives the connection's work item a ref on the connection
when it queues it - and this is called from the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.
This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).
(1) Don't give a ref to the work item.
(2) Simplify handling of service connections by adding a separate active
count so that the refcount isn't also used for this.
(3) Connection destruction for both client and service connections can
then be cleaned up by putting rxrpc_put_connection() out of line and
making a tidy progression through the destruction code (offloaded to a
workqueue if put from softirq or processor function context). The RCU
part of the cleanup then only deals with the freeing at the end.
(4) Make rxrpc_queue_conn() return immediately if it sees the active count
is -1 rather then queuing the connection.
(5) Make sure that the cleanup routine waits for the work item to
complete.
(6) Stash the rxrpc_net pointer in the conn struct so that the rcu free
routine can use it, even if the local endpoint has been freed.
Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.
Note the connection work item is mostly going to go away with the main
event work being transferred to the I/O thread, so the wait in (6) will
become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Currently, rxrpc gives the call timer a ref on the call when it starts it
and this is passed along to the workqueue by the timer expiration function.
The problem comes when queue_work() fails (ie. the work item is already
queued): the timer routine must put the ref - but this may cause the
cleanup code to run.
This has the unfortunate effect that the cleanup code may then be run in
softirq context - which means that any spinlocks it might need to touch
have to be guarded to disable softirqs (ie. they need a "_bh" suffix).
Fix this by:
(1) Don't give a ref to the timer.
(2) Making the expiration function not do anything if the refcount is 0.
Note that this is more of an optimisation.
(3) Make sure that the cleanup routine waits for timer to complete.
However, this has a consequence that timer cannot give a ref to the work
item. Therefore the following fixes are also necessary:
(4) Don't give a ref to the work item.
(5) Make the work item return asap if it sees the ref count is 0.
(6) Make sure that the cleanup routine waits for the work item to
complete.
Unfortunately, neither the timer nor the work item can simply get around
the problem by just using refcount_inc_not_zero() as the waits would still
have to be done, and there would still be the possibility of having to put
the ref in the expiration function.
Note the call work item is going to go away with the work being transferred
to the I/O thread, so the wait in (6) will become obsolete.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the sk_buff tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Add a tracepoint for the rxrpc_bundle refcounting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_call tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_conn tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_peer tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In rxrpc tracing, use enums to generate lists of points of interest rather
than __builtin_return_address() for the rxrpc_local tracepoint
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Extract the code from a received rx ABORT packet much earlier and in a
single place and harmonise the responses to malformed ABORT packets.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the rxrpc_conn_parameters struct from the rxrpc_connection and
rxrpc_bundle structs and emplace the members directly. These are going to
get filled in from the rxrpc_call struct in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the _net() and knet() debugging macros in favour of tracepoints.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the kproto() and _proto() debugging macros in preference to using
tracepoints for this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
We should not now see duplicate packets in the recvmsg_queue. At one
point, jumbo packets that overlapped with already queued data would be
added to the queue and dealt with in recvmsg rather than in the softirq
input code, but now jumbo packets are split/cloned before being processed
by the input code and the subpackets can be discarded individually.
So remove the recvmsg-side code for handling this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When retransmitting a packet, rxrpc_resend() shouldn't be attaching a ref
to the call to the txbuf as that pins the call and prevents the call from
clearing the packet buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: d57a3a1516 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Implement an in-kernel rxperf server to allow kernel-based rxrpc services
to be tested directly, unlike with AFS where they're accessed by the
fileserver when the latter decides it wants to.
This is implemented as a module that, if loaded, opens UDP port 7009
(afs3-rmtsys) and listens on it for incoming calls. Calls can be generated
using the rxperf command shipped with OpenAFS, for example.
Changes
=======
ver #2)
- Use min_t() instead of min().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: Jakub Kicinski <kuba@kernel.org>
Fix the following checker warning:
../net/rxrpc/key.c:692:9: error: subtraction of different types can't work (different address spaces)
Checker is wrong in this case, but cast the pointers to unsigned long to
avoid the warning.
Whilst we're at it, reduce the assertions to WARN_ON() and return an error.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmN0mecACgkQ+7dXa6fL
C2sHIg/8Ce7qGGeGBlDXtpHumvLAOKh/Aq45GC68M6ZyScckIOXUYKSHnM+3XWln
lUcuidsTyjHK7YRXzSLYZ56WREbr3GelEF1jh4iTt+UxBUn0gNV5C5PJQBL4KWcR
qU5ZVlnbOHb19XzRsWSMjAhdAulwnG7nhvuKB+Zo1mx7VVLKED9DCQ3A+Mm92Dm9
DjV/skzh0PI1zTBMdM7DolydftizGOO6yiFjhd8ktzIZj0TdifB63bVbMgoasQrO
SO+ZT9F4l/swiv12qgsYUH09SFdp2fdX3gt4Lj1JhwmXq/iSmeiHnvpJdbUW7RiI
jDKLiE0XpXwix29P26gq+Sdsb2pd7Ni3+YY6Qteln7RekIe6g3g2xwOLbkIgpTvc
NcwAbn0CL+ZLLts/udeIKHL5+ux1HZAAaHwftgysCHULLvxP4NrIcWrzVqzOLA9V
SH2MI6fYuOUbpgsoGxgv0+8f7MOrgUW2C9ySHjZfUPAqhAG8DinqX9gdUiYPMVF9
GrqrETmmaJCxuQaFQ8BsWKkP+KLfsi3UfEOwv7HdHjOqvCKSXOg5hHjv6Ctpp5Kv
yTj2BcAHjKB8FtuJ4h30UzVLhF1gquud+lPiO3Gbvbjhp1G1EQPwtcYjUamUre+w
lxZ870Z/jEbqEOrH7Xh1VvoKcgtp8Y9idJeU+8VNLL/r96nCF2E=
=xivU
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20221116' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix oops and missing config conditionals
The patches that were pulled into net-next previously[1] had some issues
that this patchset fixes:
(1) Fix missing IPV6 config conditionals.
(2) Fix an oops caused by calling udpv6_sendmsg() directly on an AF_INET
socket.
(3) Fix the validation of network addresses on entry to socket functions
so that we don't allow an AF_INET6 address if we've selected an
AF_INET transport socket.
Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/ [1]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells