It is not absolutely clear from the docs how the cleanup path after
device_add() should look like so spell it out explicitly.
No functional changes, just documentation.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4c06c4e6cf ("driver core: Fix possible supplier PM-usage
counter imbalance") introduced a regression that causes suppliers
to be suspended prematurely for device links added during consumer
driver probe if the initial PM-runtime status of the consumer is
"suspended" and the consumer is resumed after adding the link and
before pm_runtime_put_suppliers() is called. In that case,
pm_runtime_put_suppliers() will drop the rpm_active refcount for
the link by one and (since rpm_active is equal to two after the
preceding consumer resume) the supplier's PM-runtime usage counter
will be decremented, which may cause the supplier to suspend even
though the consumer's PM-runtime status is "active".
For this reason, partially revert commit 4c06c4e6cf as the problem
it tried to fix needs to be addressed somewhat differently, and
change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so
that the latter only drops rpm_active references acquired by the
former. [This requires adding a new field to struct device_link,
but I coulnd't find a cleaner way to address the issue that would
work in all cases.]
This causes pm_runtime_put_suppliers() to effectively ignore device
links added during consumer probe, so device_link_add() doesn't need
to worry about ensuring that suppliers will remain active after
pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE
set and it only needs to bump up rpm_active by one for those links,
so pm_runtime_active_link() is not necessary any more.
Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a stateless device link to a certain supplier with
DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the
consumer driver's probe callback, the supplier's PM-runtime usage
counter will be nonzero after that which effectively causes the
supplier to remain "always on" going forward.
Namely, device_link_add() called to add the link invokes
device_link_rpm_prepare() which notices that the consumer driver is
probing, so it increments the supplier's PM-runtime usage counter
with the assumption that the link will stay around until
pm_runtime_put_suppliers() is called by driver_probe_device(),
but if the link goes away before that point, the supplier's
PM-runtime usage counter will remain nonzero.
To prevent that from happening, first rework pm_runtime_get_suppliers()
and pm_runtime_put_suppliers() to use the rpm_active refounts of device
links and make the latter only drop rpm_active and the supplier's
PM-runtime usage counter for each link by one, unless rpm_active is
one already for it. Next, modify device_link_add() to bump up the
new link's rpm_active refcount and the suppliers PM-runtime usage
counter by two, to prevent pm_runtime_put_suppliers(), if it is
called subsequently, from suspending the supplier prematurely (in
case its PM-runtime usage counter goes down to 0 in there).
Due to the way rpm_put_suppliers() works, this change does not
affect runtime suspend of the consumer ends of new device links (or,
generally, device links for which DL_FLAG_PM_RUNTIME has just been
set).
Fixes: e2f3cd831a ("driver core: Fix handling of runtime PM flags in device_link_add()")
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new device link flag, DL_FLAG_AUTOPROBE_CONSUMER, to request the
driver core to probe for a consumer driver automatically after binding
a driver to the supplier device on a persistent managed device link.
As unbinding the supplier driver on a managed device link causes the
consumer driver to be detached from its device automatically, this
flag provides a complementary mechanism which is needed to address
some "composite device" use cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though stateful device links are managed by the driver core in
principle, their creators are allowed and sometimes even expected
to drop references to them via device_link_del() or
device_link_remove(), but that doesn't really play well with the
"persistent" link concept.
If "persistent" managed device links are created from driver
probe callbacks, device_link_add() called to do that will take a
new reference on the link each time the callback runs and those
references will never be dropped, which kind of isn't nice.
This issues arises because of the link reference counting carried
out by device_link_add() for existing links, but that is only done to
avoid deleting device links that may still be necessary, which
shouldn't be a concern for managed (stateful) links. These device
links are managed by the driver core and whoever creates one of them
will need it at least as long as until the consumer driver is detached
from its device and deleting it may be left to the driver core just
fine.
For this reason, rework device_link_add() to apply the reference
counting to stateless links only and make device_link_del() and
device_link_remove() drop references to stateless links only too.
After this change, if called to add a stateful device link for
a consumer-supplier pair for which a stateful device link is
present already, device_link_add() will return the existing link
without incrementing its reference counter. Accordingly,
device_link_del() and device_link_remove() will WARN() and do
nothing when called to drop a reference to a stateful link. Thus,
effectively, all stateful device links will be owned by the driver
core.
In addition, clean up the handling of the link management flags,
DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_AUTOREMOVE_SUPPLIER, so that
(a) they are never set at the same time and (b) if device_link_add()
is called for a consumer-supplier pair with an existing stateful link
between them, the flags of that link will be combined with the flags
passed to device_link_add() to ensure that the life time of the link
is sufficient for all of the callers of device_link_add() for the
same consumer-supplier pair.
Update the device_link_add() kerneldoc comment to reflect the
above changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling rpm_put_suppliers() from pm_runtime_drop_link() is excessive
as it affects all suppliers of the consumer device and not just the
one pointed to by the device link being dropped. Worst case it may
cause the consumer device to stop working unexpectedly. Moreover, in
principle it is racy with respect to runtime PM of the consumer
device.
To avoid these problems drop runtime PM references on the particular
supplier pointed to by the link in question only and do that after
the link has been dropped from the consumer device's list of links to
suppliers, which is in device_link_free().
Fixes: a0504aecba ("PM / runtime: Drop usage count for suppliers at device link removal")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, it is not valid to add a device link from a consumer
driver ->probe callback to a supplier that is still probing too, but
generally this is a valid use case. For example, if the consumer has
just acquired a resource that can only be available if the supplier
is functional, adding a device link to that supplier right away
should be safe (and even desirable arguably), but device_link_add()
doesn't handle that case correctly and the initial state of the link
created by it is wrong then.
To address this problem, change the initial state of device links
added between a probing supplier and a probing consumer to
DL_STATE_CONSUMER_PROBE and update device_links_driver_bound() to
skip such links on the supplier side.
With this change, if the supplier probe completes first,
device_links_driver_bound() called for it will skip the link state
update and when it is called for the consumer, the link state will
be updated to "active". In turn, if the consumer probe completes
first, device_links_driver_bound() called for it will change the
state of the link to "active" and when it is called for the
supplier, the link status update will be skipped.
However, in principle the supplier or consumer probe may still fail
after the link has been added, so modify device_links_no_driver() to
change device links in the "active" or "consumer probe" state to
"dormant" on the supplier side and update __device_links_no_driver()
to change the link state to "available" only if it is "consumer
probe" or "active".
Then, if the supplier probe fails first, the leftover link to the
probing consumer will become "dormant" and device_links_no_driver()
called for the consumer (when its probe fails) will clean it up.
In turn, if the consumer probe fails first, it will either drop the
link, or change its state to "available" and, in the latter case,
when device_links_no_driver() is called for the supplier, it will
update the link state to "dormant". [If the supplier probe fails,
but the consumer probe succeeds, which should not happen as long as
the consumer driver is correct, the link still will be around, but
it will be "dormant" until the supplier is probed again.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally without updating its flags. It is
possible, however, that the second (or any subsequent) caller of
device_link_add() for the same consumer-supplier pair will pass
DL_FLAG_PM_RUNTIME, possibly along with DL_FLAG_RPM_ACTIVE, in flags
to it and the existing link may not behave as expected then.
First, if DL_FLAG_PM_RUNTIME is not set in the existing link's flags
at all, it needs to be set like during the original initialization of
the link.
Second, if DL_FLAG_RPM_ACTIVE is passed to device_link_add() in flags
(in addition to DL_FLAG_PM_RUNTIME), the existing link should to be
updated to reflect the "active" runtime PM configuration of the
consumer-supplier pair and extra care must be taken here to avoid
possible destructive races with runtime PM of the consumer.
To that end, redefine the rpm_active field in struct device_link
as a refcount, initialize it to 1 and make rpm_resume() (for the
consumer) and device_link_add() increment it whenever they acquire
a runtime PM reference on the supplier device. Accordingly, make
rpm_suspend() (for the consumer) and pm_runtime_clean_up_links()
decrement it and drop runtime PM references to the supplier
device in a loop until rpm_active becones 1 again.
Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is incorrect to call pm_runtime_get_sync() under
device_links_write_lock(), because it may end up trying to take
device_links_read_lock() while resuming the target device and that
will deadlock in the non-SRCU case, so avoid that by resuming the
supplier device in device_link_add() before calling
device_links_write_lock().
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Fixes: baa8809f60 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit ead18c23c2 ("driver core: Introduce device links
reference counting"), if there is a link between the given supplier
and the given consumer already, device_link_add() will refcount it
and return it unconditionally. However, if the flags passed to
it on the second (or any subsequent) attempt to create a device
link between the same consumer-supplier pair are not compatible with
the existing link's flags, that is incorrect.
First off, if the existing link is stateless and the next caller of
device_link_add() for the same consumer-supplier pair wants a
stateful one, or the other way around, the existing link cannot be
returned, because it will not match the expected behavior, so make
device_link_add() dump the stack and return NULL in that case.
Moreover, if the DL_FLAG_AUTOREMOVE_CONSUMER flag is passed to
device_link_add(), its caller will expect its reference to the link
to be dropped automatically on consumer driver removal, which will
not happen if that flag is not set in the link's flags (and
analogously for DL_FLAG_AUTOREMOVE_SUPPLIER). For this reason, make
device_link_add() update the existing link's flags accordingly
before returning it to the caller.
Fixes: ead18c23c2 ("driver core: Introduce device links reference counting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the list walk in device_links_driver_cleanup() to a safe one
to avoid use-after-free when dropping a link from the list during the
walk.
Also, while at it, fix device_link_add() to refuse to create
stateless device links with DL_FLAG_AUTOREMOVE_SUPPLIER set, which is
an invalid combination (setting that flag means that the driver core
should manage the link, so it cannot be stateless), and extend the
kerneldoc comment of device_link_add() to cover the
DL_FLAG_AUTOREMOVE_SUPPLIER flag properly too.
Fixes: 1689cac5b3 ("driver core: Add flag to autoremove device link on supplier unbind")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an additional bit flag to the device_private struct named "dead".
This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.
One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DL_FLAG_AUTOREMOVE_CONSUMER/SUPPLIER means "Remove the link
automatically on consumer/supplier driver unbind", that means we should
remove whole the device_link when there is no this driver no matter what
the ref_count of the link is.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On platforms making a fair use of regulators, the dev_info() messages
coming from the device link function are a bit too verbose. The amount
of message will increase further with the clock framework joining the
device link party.
These messages looks valuable for people debugging device link related
issues, so dev_dbg() looks more appropriate than dev_info().
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the description of struct device_private says, it stores data which
is private to driver core. And it already has similar fields like:
knode_parent, knode_driver, knode_driver and knode_bus. This look it is
more proper to put knode_class together with those fields to make it
private to driver core.
This patch move device->knode_class to device_private to make it comply
with code convention.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the "big" set of driver core patches for 4.21-rc1.
It's not really big, just a number of small changes for some reported
issues, some documentation updates to hopefully make it harder for
people to abuse the driver model, and some other minor cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCY/dA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZrgCeIi+rWj0mqlyKZk0A+gurH2BPmfwAniGfiHJp
w60Fr5/EbCqUr1d1wQIO
=4N7R
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 4.21-rc1.
It's not really big, just a number of small changes for some reported
issues, some documentation updates to hopefully make it harder for
people to abuse the driver model, and some other minor cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mm, memory_hotplug: update a comment in unregister_memory()
component: convert to DEFINE_SHOW_ATTRIBUTE
sysfs: Disable lockdep for driver bind/unbind files
driver core: Add missing dev->bus->need_parent_lock checks
kobject: return error code if writing /sys/.../uevent fails
driver core: Move async_synchronize_full call
driver core: platform: Respect return code of platform_device_register_full()
kref/kobject: Improve documentation
drivers/base/memory.c: Use DEVICE_ATTR_RO and friends
driver core: Replace simple_strto{l,ul} by kstrtou{l,ul}
kernfs: Improve kernfs_notify() poll notification latency
kobject: Fix warnings in lib/kobject_uevent.c
kobject: drop unnecessary cast "%llu" for u64
driver core: fix comments for device_block_probing()
driver core: Replace simple_strtol by kstrtoint
Propagate error code back to userspace if writing the /sys/.../uevent
file fails. Before, the write operation always returned with success,
even if we failed to recognize the input string or if we failed to
generate the uevent itself.
With the error codes properly propagated back to userspace, we are
able to react in userspace accordingly by not assuming and awaiting
a uevent that is not delivered.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current kref and kobject documentation may be
insufficient to understand these common pitfalls regarding
object lifetime and object releasing.
Add a bit more documentation and improve the warnings
seen by the user, pointing to the right piece of documentation.
Also, it's important to understand that making fun of people
publicly is not at all helpful, doesn't provide any value,
and it's not a healthy way of encouraging developers to do better.
"Mocking mercilessly" will, if anything, make developers feel bad
and go away. This kind of behavior should not be encouraged or justified.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple_strto{l,ul} are deprecated, use kstrtou{l,ul} instead.
Signed-off-by: Kaitao cheng <pilgrimtao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Software node is a new struct fwnode_handle type that can be
used to describe devices in kernel (software). It is meant
to complement fwnodes representing real firmware nodes when
they are incomplete (for example missing device properties)
and to supply the primary fwnode when the firmware lacks
hardware description for a device completely.
The software node type is really meant to replace the
currently used "property_set" struct fwnode_handle type. The
handling of struct property_set is glued to the generic
device property handling code, and it is not possible to
create a struct property_set independently from the device
that it is bind to. struct property_set is only created when
device properties are added to already initialized struct
device, and control of it is only possible from the generic
property handling code.
Software nodes are instead designed to be created
independently from the device entries (struct device). It
makes them much more flexible, as then the device meant to
be bind to the node can be created at a later time, and from
another location. It is also possible to bind multiple
devices to a single software node if needed.
The software node implementation also includes support for
node hierarchy, which was the main motivation for this
commit. The node hierarchy was something that was requested
for the struct property_set, but it did not seem reasonable
to try to extend the property_set support for that purpose.
struct property_set was really meant only for device
property handling like the name suggests.
Support for struct property_set is not yet removed in this
commit, but it will be in the following one.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of relying on the "platform_notify" callback hook,
introducing separate notification function
acpi_platform_notify() and calling that directly from
drivers core when device entries are added and removed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since it should be possible to support several hardware
description models at the same time (at least in theory),
for example ACPI and devicetree on a running system, the
platform notifications need to be handled differently.
For now a single "platform_notify" callback function was
used to notify the underlying base system which is in charge
of the hardware description when a new device entry was
added to the system, but that callback is available to only
a single base system at the time. This will add a function
device_platform_notify() and replace all direct
platform_notify() calls with it.
device_platform_notify() will first simply call the
platform_notify() callback, so this commit has no functional
affect, however, the idea is that individual base systems
will put their direct notification calls there instead of
using the platform_notify function pointer.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge issue
reported. That merge issue is in fs/sysfs/group.c and Stephen has
posted the diff of what it should be to resolve this. I'll follow up
with that diff to this pull request.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g86Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyXQCePaZSW8wft4b7nLN8RdZ98ATBru0Ani10lrJa
HQeQJRNbWU1AZ0ym7695
=tOaH
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal
driver (Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic
scaling governors on systems with many CPUs to avoid
scalability issues with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq
driver (Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes
(from Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures
in the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS
1025C laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in
the devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJbcqOqAAoJEILEb/54YlRxOxMP/2ZFvnXU0pey/VX/+TelLMS7
/ROVGQ+s75QP1c9P/3BjvnXc0dsMRLRFPog+7wyoG/2DbEIV25COyAYsmSE0TRni
XUaZO6YAx4/e3pm2AfamYbLCPvjw85eucHg5QJQ4b1mSVRNJOsNv+fUo6lmxwvnm
j9kHvfttFeIhoa/3wa7hbhPKLln46atnpVSxCIceY7L5EFNhkKBvQt6B5yx9geb9
QMY6ohgkyN+bnK9QySXX+trcWpzx1uGX0apI07NkX7n9QGFdU4lCW8lsAf8jMC3g
PPValTsUQsdRONUJJsrgqBioq4tvtgQWibyS2tfRrOGXYvHpJNpGmHVplfsrf/SE
cvlsciR47YbmrXZuqg/r8hql+qefNN16/rnZIZ9VnbcG806VBy2z8IzI5wcdWR7p
vzxhbCqVqOHcEdEwRwvuM2io67MWvkGtKsbCP+33DBh8SubpsECpKN4nIDboa3SE
CJ15RUqXnF6enmmfCKOoHZeu7iXWDz6Pi71XmRzaj9DqbITVV281IerqLgV3rbal
BVa53+202iD0IP+2b7KedGe/5ALlI97ffN0gB+L/eB832853DKSZQKzcvvpRhEN7
Iv2crnUwuQED9ns8P7hzp1Bk9CFCAOLW8UM43YwZRPWnmdeSsPJusJ5lzkAf7bss
wfsFoUE3RaY4msnuHyCh
=kv2M
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new framework for CPU idle time injection, to be used by
all of the idle injection code in the kernel in the future, fix some
issues and add a number of relatively small extensions in multiple
places.
Specifics:
- Add a new framework for CPU idle time injection (Daniel Lezcano).
- Add AVS support to the armada-37xx cpufreq driver (Gregory
CLEMENT).
- Add support for current CPU frequency reporting to the ACPI CPPC
cpufreq driver (George Cherian).
- Rework the cooling device registration in the imx6q/thermal driver
(Bastian Stender).
- Make the pcc-cpufreq driver refuse to work with dynamic scaling
governors on systems with many CPUs to avoid scalability issues
with it (Rafael Wysocki).
- Fix the intel_pstate driver to report different maximum CPU
frequencies on systems where they really are different and to
ignore the turbo active ratio if hardware-managend P-states (HWP)
are in use; make it use the match_string() helper (Xie Yisheng,
Srinivas Pandruvada).
- Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
(Niklas Cassel).
- Add a tracepoint for the tracking of frequency limits changes (from
Andriod) to the cpufreq core (Ruchi Kandoi).
- Fix a circular lock dependency between CPU hotplug and sysfs
locking in the cpufreq core reported by lockdep (Waiman Long).
- Avoid excessive error reports on driver registration failures in
the ARM cpuidle driver (Sudeep Holla).
- Add a new device links flag to the driver core to make links go
away automatically on supplier driver removal (Vivek Gautam).
- Eliminate potential race condition between system-wide power
management transitions and system shutdown (Pingfan Liu).
- Add a quirk to save NVS memory on system suspend for the ASUS 1025C
laptop (Willy Tarreau).
- Make more systems use suspend-to-idle (instead of ACPI S3) by
default (Tristian Celestin).
- Get rid of stack VLA usage in the low-level hibernation code on
64-bit x86 (Kees Cook).
- Fix error handling in the hibernation core and mark an expected
fall-through switch in it (Chengguang Xu, Gustavo Silva).
- Extend the generic power domains (genpd) framework to support
attaching a device to a power domain by name (Ulf Hansson).
- Fix device reference counting and user limits initialization in the
devfreq core (Arvind Yadav, Matthias Kaehlcke).
- Fix a few issues in the rk3399_dmc devfreq driver and improve its
documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).
- Drop a redundant error message from the exynos-ppmu devfreq driver
(Markus Elfring)"
* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
PM / reboot: Eliminate race between reboot and suspend
PM / hibernate: Mark expected switch fall-through
cpufreq: intel_pstate: Ignore turbo active ratio in HWP
cpufreq: Fix a circular lock dependency problem
cpu/hotplug: Add a cpus_read_trylock() function
x86/power/hibernate_64: Remove VLA usage
cpufreq: trace frequency limits change
cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
cpufreq: armada-37xx: Add AVS support
dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
PM / devfreq: Init user limits from OPP limits, not viceversa
PM / devfreq: rk3399_dmc: fix spelling mistakes.
PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
dt-bindings: clock: add rk3399 DDR3 standard speed bins.
...
In some cases the link between between customer and supplier
already exist, for example when a device use its parent as a supplier.
Do not warn about already existing dependencies because device_link_add()
takes care of this case.
Link: http://lkml.kernel.org/r/20180709111753eucas1p1f32e66fb2f7ea3216097cd72a132355d~-rzycA5Rg0378203782eucas1p1C@eucas1p1.samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race window in device_shutdown(), which may cause
-1. parent device shut down before child or
-2. no shutdown on a new probing device.
For 1st, taking the following scenario:
device_shutdown new plugin device
list_del_init(parent_dev);
spin_unlock(list_lock);
device_add(child)
probe child
shutdown parent_dev
--> now child is on the tail of devices_kset
For 2nd, taking the following scenario:
device_shutdown new plugin device
device_add(dev)
device_lock(dev);
...
device_unlock(dev);
probe dev
--> now, the new occurred dev has no opportunity to shutdown
To fix this race issue, just prevent the new probing request. With this
logic, device_shutdown() is more similar to dpm_prepare().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Plumb in get_ownership() callback for devices belonging to a class so that
they can be created with uid/gid different from global root. This will
allow network devices in a container to belong to container's root and not
global root.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For devices with a class, we create a "glue" directory between
the parent device and the new device with the class name.
This directory is never "explicitely" removed when empty however,
this is left to the implicit sysfs removal done by kobject_release()
when the object loses its last reference via kobject_put().
This is problematic because as long as it's not been removed from
sysfs, it is still present in the class kset and in sysfs directory
structure.
The presence in the class kset exposes a use after free bug fixed
by the previous patch, but the presence in sysfs means that until
the kobject is released, which can take a while (especially with
kobject debugging), any attempt at re-creating such as binding a
new device for that class/parent pair, will result in a sysfs
duplicate file name error.
This fixes it by instead doing an explicit kobject_del() when
the glue dir is empty, by keeping track of the number of
child devices of the gluedir.
This is made easy by the fact that all glue dir operations are
done with a global mutex, and there's already a function
(cleanup_glue_dir) called in all the right places taking that
mutex that can be enhanced for this. It appears that this was
in fact the intent of the function, but the implementation was
wrong.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_private_init is called only in core.c, extern declare is
unnecessary and make it static.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a flag to autoremove the device links on supplier driver
unbind. This obviates the need to explicitly delete the link
in the remove path.
We remove these links only when the supplier's link to its
consumers has gone to DL_STATE_SUPPLIER_UNBIND state.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that we want to add another flag to autoremove the device link
on supplier unbind, it's fair to rename the existing flag from
DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can
add similar flag for supplier later.
And, while we are touching device.h, fix a doc build warning.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a prefixing macro to dev_<level> uses similar to the pr_fmt
prefixing macro used in pr_<level> calls.
This can help avoid some string duplication in dev_<level> uses.
The default, like pr_fmt, is an empty #define dev_fmt(fmt) fmt
Rename the existing dev_<level> functions to _dev_<level> and
introduce #define dev_<level> _dev_<level> macros that use the
new #define dev_fmt
Miscellanea:
o Consistently use #defines with fmt, ... and ##__VA_ARGS__
o Remove unnecessary externs
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device_link_remove uses the same arguments than device_link_add. The Goal
is to avoid storing the link pointer.
Signed-off-by: pascal paillet <p.paillet@st.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
If a device link is added via device_link_add() by the driver of the
link's consumer device, the supplier's runtime PM usage counter is
going to be dropped by the pm_runtime_put_suppliers() call in
driver_probe_device(). However, in that case it is not incremented
unless the supplier driver is already present and the link is not
stateless. That leads to a runtime PM usage counter imbalance for
the supplier device in a few cases.
To prevent that from happening, bump up the supplier runtime
PM usage counter in device_link_add() for all links with the
DL_FLAG_PM_RUNTIME flag set that are added at the consumer probe
time. Use pm_runtime_get_noresume() for that as the callers of
device_link_add() who want the supplier to be resumed by it are
expected to pass DL_FLAG_RPM_ACTIVE in flags to it anyway, but
additionally resume the supplier if the link is added during
consumer driver probe to retain the existing behavior for the
callers depending on it.
Fixes: 21d5c57b37 (PM / runtime: Use device links)
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the driver core patchset for 4.18-rc1.
The large chunk of these are firmware core documentation and api
updates. Nothing major there, just better descriptions for others to be
able to understand the firmware code better. There's also a user for a
new firmware api call.
Other than that, there are some minor updates for debugfs, kernfs, and
the driver core itself.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbZAg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykbiACgu/2qqou1iV4GxOkvrj5wfsHD+lYAoNPNNDHu
Qf3CCEKbxogF6YowDiAH
=Dsqq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the driver core patchset for 4.18-rc1.
The large chunk of these are firmware core documentation and api
updates. Nothing major there, just better descriptions for others to
be able to understand the firmware code better. There's also a user
for a new firmware api call.
Other than that, there are some minor updates for debugfs, kernfs, and
the driver core itself.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: hold dev's parent lock when needed
driver-core: return EINVAL error instead of BUG_ON()
driver core: add __printf verification to device_create_groups_vargs
mm: memory_hotplug: use put_device() if device_register fail
base: core: fix typo 'can by' to 'can be'
debugfs: inode: debugfs_create_dir uses mode permission from parent
debugfs: Re-use kstrtobool_from_user()
Documentation: clarify firmware_class provenance and why we can't rename the module
Documentation: remove stale firmware API reference
Documentation: fix few typos and clarifications for the firmware loader
ath10k: re-enable the firmware fallback mechanism for testmode
ath10k: use firmware_request_nowarn() to load firmware
firmware: add firmware_request_nowarn() - load firmware without warnings
firmware_loader: make firmware_fallback_sysfs() print more useful
firmware_loader: move kconfig FW_LOADER entries to its own file
firmware_loader: replace ---help--- with help
firmware_loader: enhance Kconfig documentation over FW_LOADER
firmware_loader: document firmware_sysfs_fallback()
firmware: rename fw_sysfs_fallback to firmware_fallback_sysfs()
firmware: use () to terminate kernel-doc function names
...
__printf is useful to verify format and arguments. Remove the following
warning (with W=1):
drivers/base/core.c:2435:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is hitting WARN() at kernfs_add_one() [1].
This is because kernfs_create_link() is confused by previous device_add()
call which continued without setting dev->kobj.parent field when
get_device_parent() failed by memory allocation fault injection.
Fix this by propagating the error from class_dir_create_and_add() to
the calllers of get_device_parent().
[1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bridge and its endpoint is enumerated the devices are added to the
dpm list. Afterward, the bridge defers probe when IOMMU is not ready.
This causes the bridge to be moved to the end of the dpm list when
deferred probe kicks in. The order of the dpm list for bridge and
endpoint is reversed.
Add reordering code to move the bridge and its children and consumers to
the end of the pm list so the order for suspend and resume is not altered.
The code also move device and its children and consumers to the tail of
device_kset list if it is registered.
Signed-off-by: Toan Le <toanle@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If device_link_add() is invoked multiple times with the same supplier
and consumer combo, it will create the link on first addition and
return a pointer to the already existing link on all subsequent
additions.
The semantics for device_link_del() are quite different, it deletes
the link unconditionally, so multiple invocations are not allowed.
In other words, this snippet ...
struct device *dev1, *dev2;
struct device_link *link1, *link2;
link1 = device_link_add(dev1, dev2, 0);
link2 = device_link_add(dev1, dev2, 0);
device_link_del(link1);
device_link_del(link2);
... causes the following crash:
WARNING: CPU: 4 PID: 2686 at drivers/base/power/runtime.c:1611 pm_runtime_drop_link+0x40/0x50
[...]
list_del corruption, 0000000039b800a4->prev is LIST_POISON2 (00000000ecf79852)
kernel BUG at lib/list_debug.c:50!
The issue isn't as arbitrary as it may seem: Imagine a device link
which is added in both the supplier's and the consumer's ->probe hook.
The two drivers can't just call device_link_del() in their ->remove hook
without coordination.
Fix by counting multiple additions and dropping the device link only
when the last addition is unwound.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit baa8809f60 (PM / runtime: Optimize the use of device links)
added an invocation of pm_runtime_drop_link() to __device_link_del().
However there are two variants of that function, one for CONFIG_SRCU and
another for !CONFIG_SRCU, and the commit only modified the former.
Fixes: baa8809f60 (PM / runtime: Optimize the use of device links)
Cc: v4.10+ <stable@vger.kernel.org> # v4.10+
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull printk updates from Petr Mladek:
- Add a console_msg_format command line option:
The value "default" keeps the old "[time stamp] text\n" format. The
value "syslog" allows to see the syslog-like "<log
level>[timestamp] text" format.
This feature was requested by people doing regression tests, for
example, 0day robot. They want to have both filtered and full logs
at hands.
- Reduce the risk of softlockup:
Pass the console owner in a busy loop.
This is a new approach to the old problem. It was first proposed by
Steven Rostedt on Kernel Summit 2017. It marks a context in which
the console_lock owner calls console drivers and could not sleep.
On the other side, printk() callers could detect this state and use
a busy wait instead of a simple console_trylock(). Finally, the
console_lock owner checks if there is a busy waiter at the end of
the special context and eventually passes the console_lock to the
waiter.
The hand-off works surprisingly well and helps in many situations.
Well, there is still a possibility of the softlockup, for example,
when the flood of messages stops and the last owner still has too
much to flush.
There is increasing number of people having problems with
printk-related softlockups. We might eventually need to get better
solution. Anyway, this looks like a good start and promising
direction.
- Do not allow to schedule in console_unlock() called from printk():
This reverts an older controversial commit. The reschedule helped
to avoid softlockups. But it also slowed down the console output.
This patch is obsoleted by the new console waiter logic described
above. In fact, the reschedule made the hand-off less effective.
- Deprecate "%pf" and "%pF" format specifier:
It was needed on ia64, ppc64 and parisc64 to dereference function
descriptors and show the real function address. It is done
transparently by "%ps" and "pS" format specifier now.
Sergey Senozhatsky found that all the function descriptors were in
a special elf section and could be easily detected.
- Remove printk_symbol() API:
It has been obsoleted by "%pS" format specifier, and this change
helped to remove few continuous lines and a less intuitive old API.
- Remove redundant memsets:
Sergey removed unnecessary memset when processing printk.devkmsg
command line option.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
printk: drop redundant devkmsg_log_str memsets
printk: Never set console_may_schedule in console_trylock()
printk: Hide console waiter logic into helpers
printk: Add console owner and waiter logic to load balance console writes
kallsyms: remove print_symbol() function
checkpatch: add pF/pf deprecation warning
symbol lookup: introduce dereference_symbol_descriptor()
parisc64: Add .opd based function descriptor dereference
powerpc64: Add .opd based function descriptor dereference
ia64: Add .opd based function descriptor dereference
sections: split dereference_function_descriptor()
openrisc: Fix conflicting types for _exext and _stext
lib: do not use print_symbol()
irq debug: do not use print_symbol()
sysfs: do not use print_symbol()
drivers: do not use print_symbol()
x86: do not use print_symbol()
unicore32: do not use print_symbol()
sh: do not use print_symbol()
mn10300: do not use print_symbol()
...
print_symbol() is a very old API that has been obsoleted by %pS format
specifier in a normal printk() call.
Replace print_symbol() with a direct printk("%pS") call.
Link: http://lkml.kernel.org/r/20171211125025.2270-10-sergey.senozhatsky@gmail.com
To: Andrew Morton <akpm@linux-foundation.org>
To: Russell King <linux@armlinux.org.uk>
To: Catalin Marinas <catalin.marinas@arm.com>
To: Mark Salter <msalter@redhat.com>
To: Tony Luck <tony.luck@intel.com>
To: David Howells <dhowells@redhat.com>
To: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Guan Xuetao <gxt@mprc.pku.edu.cn>
To: Borislav Petkov <bp@alien8.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Thomas Gleixner <tglx@linutronix.de>
To: Peter Zijlstra <peterz@infradead.org>
To: Vineet Gupta <vgupta@synopsys.com>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-sh@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: updated commit message]
Signed-off-by: Petr Mladek <pmladek@suse.com>
When error happens, these interators return the error, no interation should
be continued, so make the change for getting out of while immediately.
Signed-off-by: Gimcuan Hui <gimcuan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all driver core files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the driver core files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the set of driver core / debugfs patches for 4.15-rc1.
Not many here, mostly all are debugfs fixes to resolve some
long-reported problems with files going away with references to them in
userspace. There's also some SPDX cleanups for the debugfs code, as
well as a few other minor driver core changes for issues reported by
people.
All of these have been in linux-next for a week or more with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2NCA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUNgCfYq434CFh+YtwITBNYdqkFYFf0ZAAn3qfhh2+
M3rmZzwk2MKBvNQ2npvt
=/8+Y
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core / debugfs patches for 4.15-rc1.
Not many here, mostly all are debugfs fixes to resolve some
long-reported problems with files going away with references to them
in userspace. There's also some SPDX cleanups for the debugfs code, as
well as a few other minor driver core changes for issues reported by
people.
All of these have been in linux-next for a week or more with no
reported issues"
* tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link deferred probe
debugfs: Remove redundant license text
debugfs: add SPDX identifiers to all debugfs files
debugfs: defer debugfs_fsdata allocation to first usage
debugfs: call debugfs_real_fops() only after debugfs_file_get()
debugfs: purge obsolete SRCU based removal protection
IB/hfi1: convert to debugfs_file_get() and -put()
debugfs: convert to debugfs_file_get() and -put()
debugfs: debugfs_real_fops(): drop __must_hold sparse annotation
debugfs: implement per-file removal protection
debugfs: add support for more elaborate ->d_fsdata
driver core: Move device_links_purge() after bus_remove_device()
arch_topology: Fix section miss match warning due to free_raw_capacity()
driver-core: pr_err() strings should end with newlines
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing memory
leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node. The
prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to dtb
compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage Technology,
shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
Opal Kelly, and Next Thing
-----BEGIN PGP SIGNATURE-----
iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
=jgpN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Borislav Petkov