Commit Graph

11257 Commits

Author SHA1 Message Date
Eric W. Biederman 8d8cb8a1bb [PATCH] sysctl: C99 convert arch/mips/lasat/sysctl.c and remove ABI breakage
While C99 converting the ctl_table initializers I realized that the binary
sysctl numbers were in conflict with the binary values under CTL_KERN.
Including CTL_KERN KERN_VERSION as used by glibc.  So I just removed the
sysctl binary interface for these values, as it was unsupportable.

Luckily these sysctl were inserted at the end of the sysctl list so this bug
was not visible to userspace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:57 -08:00
Eric W. Biederman 7ed744d1e8 [PATCH] sysctl: C99 convert the ctl_tables in arch/mips/au1000/common/power.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:57 -08:00
Eric W. Biederman ee404566f9 [PATCH] sysctl: mips/au1000: remove sys_sysctl support
The assignment of binary numbers for sys_sysctl use was in shambles and
despite requiring methods.  Nothing was implemented on the sys_sysctl side.

So this patch gives a mercy killing to the sys_sysctl support for
powermanagment on mips/au1000.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:57 -08:00
Eric W. Biederman 4e00990118 [PATCH] sysctl: C99 convert arch/ia64/kernel/perfmon and remove ABI breakage
This convters the sysctl ctl_tables to use C99 initializers.  While I was
looking at it I discovered it was using a portion of the sysctl binary
addresses space under CTL_KERN KERN_OSTYPE which was completely inappropriate.
 So I completely removed all of the sysctl binary names, to remove and avoid
the ABI conflict.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman 68cbf07536 [PATCH] sysctl: C99 Convert arch/ia64/sn/kernel/xpc_main.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman 79eec3d3d9 [PATCH] sysctl: sn: remove sysctl ABI BREAKAGE
By not using the enumeration in sysctl.h (or even understanding it) the SN
platform placed their arch specific xpc directory on top of CTL_KERN and only
because they didn't have 4 entries in their xpc directory got lucky and didn't
break glibc.

This is totally irresponsible.  So this patch entirely removes sys_sysctl
support from their sysctl code.  Hopefully they don't have ascii name
conflicts as well.

And now that they have no ABI numbers add them to the end instead of the
sysctl list instead of the head so nothing else will be overridden.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman 317ed68c01 [PATCH] sysctl: C99 convert arch/frv/kernel/sysctl.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman dfd007a667 [PATCH] sysctl: C99 convert arch/frv/kernel/pm.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman c8d1a1ac16 [PATCH] sysctl: frv: remove unnecessary insert_at_head flag
Since the binary sysctl numbers are unique putting the registered sysctls at
the head of the sysctl list where they can override existing sysctls serves no
useful purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman 77f6dfb129 [PATCH] sysctl: move CTL_FRV into sysctl.h where it belongs
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman febe1c2579 [PATCH] sysctl: frv: pm remove unnecessary insert_at_head flag
With unique binary numbers setting insert_at_head to insert yourself at the
head of sysctl list and thus override existing sysctl entries serves no point.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Eric W. Biederman 462591b886 [PATCH] sysctl: move CTL_PM into sysctl.h where it belongs
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:56 -08:00
Thomas Gleixner 38515e908b [PATCH] Scheduled removal of SA_xxx interrupt flags fixups
The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Andrew Victor 69b2e99cf5 [ARM] 4189/1: AT91: MACB Ethernet clock
The MACB Ethernet driver searches for a "macb_clk" clock, so rename the
"ether_clk" on the SAM9260 and SAM9263 to "macb_clk".

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:22:09 +00:00
Dan Williams 588ef76935 [ARM] 4184/1: iop: cp6 access handler (undef_hook)
Enable svc access to cp6 via an undefined instruction hook.  Do not enable
access for usr code.

This patch also makes iop13xx select PLAT_IOP, this requires a small change
to drivers/i2c/busses/i2c-iop3xx.c.

Per Lennert Buytenhek's note, the cp6 trap routine is moved to arch/arm/plat-iop
Per Nicolas Pitre's note, the cp_wait is skipped since the latency to
return to the faulting function is longer than cp_wait.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:21:24 +00:00
Dan Williams dfc544c721 [ARM] 4183/1: do_undefinstr: read svc undefined instructions with svc privileges
do_undefinstr currently does not expect undefined instructions in kernel
code, since it always uses get_user() to read the instruction.

Dereference the 'pc' pointer directly in the SVC case.

Per Nicolas Pitre's note, kernel code is never in thumb mode.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:21:22 +00:00
Dan Williams 6df26700c0 [ARM] 4182/1: iop3xx: fix the ioremap implementation to not remap static ranges
Implement a custom ioremap implementation for iop3xx. This saves
establishing new mappings. It also cleans up the PCI IO resource to be a
physical address rather than a virtual address as Russell pointed out on
the original iop13xx port.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:21:21 +00:00
Ben Dooks 5ac602b2ea [ARM] 4188/1: S3C24XX: add CRAMFS to s3c2410_defconfig
Add cramfs support in by default, as a lot of
our initrds are cramfs images.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:32 +00:00
Ben Dooks bd65c82b9e [ARM] 4179/1: S3C2440: DMA ordering list
Add DMA ordering list for S3C2440

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:26 +00:00
Ben Dooks dad8d6c50e [ARM] 4178/1: S3C2410: DMA ordering list
Add DMA ordering list for S3C2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:25 +00:00
Ben Dooks 0c6022d453 [ARM] 4177/1: S3C24XX: Add DMA channel allocation order
Allow the CPU code, and any board specific initialisation
code to change the allocation order of the DMA channels,
or stop a peripheral allocating any DMA at-all.

This is due to the scarce mapping of DMA channels on
some earlier S3C24XX cpus, where the selection changes
depending on the channel in use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:22 +00:00
Arnaud Patard d2a76020e3 [ARM] 4176/1: H1940 leds
H1940 leds device addition.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:20 +00:00
Ben Dooks ecd1b171a7 [ARM] 4175/1: SMDK2413: add udc pull-up control
USB gadget pull-up control and device addition
for the SMDK2413/SMDK2412 board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:17 +00:00
Arnaud Patard 71a9c42412 [ARM] 4174/1: H1940 usb device definitions
This patch is adding the usb device controller to the h1940 device
list. It's also adding the code to handle the usb pull-ups.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:15 +00:00
Arnaud Patard 0dcfc328cc [ARM] 4173/1: S3C24XX usb device platform datas
This patch is adding the functions and structures used for handling the
S3C24XX udc driver platform datas.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14 15:04:13 +00:00
Paul Mundt e65fa9f59e sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 15:06:09 +09:00
Paul Mundt 71074d3a2c sh: Fixup r7780rp pata_platform for devres conversion.
Tidy up the R7780RP I/O mapping routines and switch the
pata_platform resources to IORESOURCE_MEM types, killing off
the useless port->addr conversion.

This fixes up R7780RP to boot after the recent devres conversion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 14:49:04 +09:00
Paul Mundt db2e1fa3f0 sh: Revert TLB miss fast-path changes that broke PTEA parts.
This ended up causing problems for older parts (particularly ones
using PTEA). Revert this for now, it can be added back in once it's
had some more testing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 14:13:10 +09:00
Rafa Bilski b6f45a4b07 [CPUFREQ] EPS - Correct 2nd brand test
Solution for small, but nasty bug: access beyond end of f_table for C7 brand.

Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-02-13 22:58:26 -05:00
Linus Torvalds f90203e0cf Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...
2007-02-13 17:34:23 -08:00
David Gibson 719c91ccad [POWERPC] Use udbg_early_init() on ppc32
udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured.  This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.

This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:55:16 +11:00
Arnd Bergmann 8d38a5b2fa [POWERPC] Open Firmware serial port driver
This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:04 +11:00
Michael Ellerman 775aeff447 [POWERPC] Move MPIC smp routines into mpic.c
Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:04 +11:00
Michael Ellerman dce623e082 [POWERPC] Cleanup pseries kexec code
Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:03 +11:00
Michael Ellerman 8feaeca23a [POWERPC] Cleanup pseries smp initialisation code
Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:03 +11:00
Michael Ellerman 577830b034 [POWERPC] Consolidate pseries platform header files into pseries.h
Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-14 11:50:03 +11:00
Paul Mackerras 944b380e0c Merge branch 'cell-merge' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arnd/cell-2.6 2007-02-14 11:33:39 +11:00
Linus Torvalds 463020ce42 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
  [MIPS] Fix uniprocessor Sibyte builds.
  [MIPS] Make entry.S a little more readable.
  [MIPS] Remove stray instruction from __get_user_asm_ll32.
  [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
  [MIPS] DECstation: Fix irq handling
  [MIPS] signals: make common _BLOCKABLE macro
  [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
  [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
  [MIPS] signal: Fix warnings in o32 compat code.
  [MIPS] IP27: Enable N32 support in defconfig.
  Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
  [MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
  [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
  [MIPS] Improve branch prediction in ll/sc atomic operations.
2007-02-13 16:12:23 -08:00
Ralf Baechle 431dc80403 [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Andrew Sharp 366d6aef28 [MIPS] Fix uniprocessor Sibyte builds.
Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Franck Bui-Huu 7da8a581f5 [MIPS] Make entry.S a little more readable.
When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception().  Therefore we favour the return
from irq case which should be more common than the other one.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Atsushi Nemoto d01f06ef0c [MIPS] DECstation: Fix irq handling
When I post a patch (commit f431baa55a),
I just tried to not change behavior of existing codes, but it seems
dec/int-handler.S had been broken since its previous commit
937a801576.

The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so
dec's plat_irq_dispatch should not do it, and there is no need to
adjust RA.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Franck Bui-Huu 24c556e99e [MIPS] signals: make common _BLOCKABLE macro
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:51 +00:00
Ralf Baechle 6668058346 [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Ralf Baechle 205d84aaea [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Ralf Baechle dd02f06aa9 [MIPS] signal: Fix warnings in o32 compat code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Ralf Baechle af3d10d52d [MIPS] IP27: Enable N32 support in defconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Ralf Baechle 9a88cbb522 [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
Platforms will now have to supply a function dma_device_is_coherent which
returns if a particular device participates in the coherence domain.  For
most platforms this function will always return 0 or 1.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-13 22:40:50 +00:00
Kumar Gala fff5f52808 Merge branch '85xx' into for_paulus 2007-02-13 16:14:01 -06:00
Becky Bruce 02ed82ccc5 [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
Eliminate needless invocation of the SYNC macro (which always evaluates to
nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc).

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 16:13:27 -06:00
Maynard Johnson c7eb734766 [POWERPC] cell: pm_rtas_activat_signals routine cleanup
The code was setting up the debug bus for group 21 when profiling on the
event PPU CYCLES.  The debug bus is not actually used by the hardware
performance counters when counting PPU CYCLES.  Setting up the debug bus
for PPU CYCLES causes signal routing conflicts on the debug bus when
profiling PPU cycles and another PPU event.  This patch fixes the code to
only setup the debug bus to route the performance signals for the non
PPU CYCLE events.

Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 22:03:07 +01:00
Carl Love bcb63e25ed [POWERPC] cell: PPU Oprofile cleanup patch
This is a clean up patch that includes the following changes:

 -Some comments were added to clarify the code based on feedback
  from the community.
 -The write_pm_cntrl() and set_count_mode() were passed a
  structure element from a global variable.  The argument was
  removed so the functions now just operate on the global directly.
 -The set_pm_event() function call in the cell_virtual_cntr()
  routine was moved to a for-loop before the for_each_cpu loop

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 22:03:06 +01:00
Masato Noguchi 128b8546a8 [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
I found an exploit in current kernel.
Currently, there is no range check about mmapping "/mem" node in
spufs. Thus, an application can access privilege memory region.

In case this kernel already worked on a public server, I send this
information only here.
If there are such servers in somewhere, please replace it, ASAP.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:43 +01:00
Christoph Hellwig 2eb1b12049 [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
For SCHED_RR tasks we can do some really trivial timeslicing.  Basically
we fire up a time for every scheduler tick that searches for a higher
or same priority thread that is on the runqueue and if there is one
context switches to it.  Because we can't lock spus from timer context
we actually run this from a delayed runqueue instead of a timer.

A nice optimization would be to skip the actual priority bitmap search
when there are less contexts than physical spus available.  To implement
this I need a so far unpublished patch from Andre, and it will be added
after we have that patch in.

Note that right now we only do the time slicing for SCHED_RR tasks.
The code would work for SCHED_OTHER tasks aswell, but their prio
value is defered from the one the PPU thread has at time of spu_run,
and using this for spu scheduling decisions would make the code very
unfair.  SCHED_OTHER support will be enabled once we the spu scheduler
knows how to calculcate cpu_context.prio (very soon)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:43 +01:00
Christoph Hellwig 72cb360839 [POWERPC] spu sched: use DECLARE_BITMAP
use DECLARE_BITMAP in the spu scheduler instead of reimplementing it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:42 +01:00
Christoph Hellwig 52f04fcf66 [POWERPC] spu sched: forced preemption at execution
If we start a spu context with realtime priority we want it to run
immediately and not wait until some other lower priority thread has
finished.  Try to find a suitable victim and use it's spu in this
case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:42 +01:00
Christoph Hellwig ae7b4c5284 [POWERPC] spu sched: update some comments
Give spu_yield a kerneldoc comment and remove the old comment
documenting spu_activate, spu_deactive and spu_yield as all of them
now have descriptive kerneldoc comments of their own.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:42 +01:00
Christoph Hellwig 678b2ff1e6 [POWERPC] spu sched: simplity spu_remove_from_active_list
If we call spu_remove_from_active_list that spu is always guaranteed
to be on the active list and in runnable state, so we can simply
do a list_del to remove it and unconditionally take the was_active
codepath.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:41 +01:00
Christoph Hellwig 26bec67386 [POWERPC] spufs: optimize spu_run
There is no need to directly wake up contexts in spu_activate when
called from spu_run, so add a flag to surpress this wakeup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:41 +01:00
Christoph Hellwig 079cdb6161 [POWERPC] spufs: runqueue simplification
This is the biggest patch in this series, and it reworks the guts of
the spu scheduler runqueue mechanism:

 - instead of embedding a waitqueue in the runqueue there is now a
   simple doubly-linked list, the actual wakeups happen by reusing
   the stop_wq in the spu context (maybe we should rename it one day)
 - spu_free and spu_prio_wakeup are merged into a single spu_reschedule
   function
 - various functionality is split out into small helpers, and kerneldoc
   comments are added in various places to document what's going on.
 - spu_activate is rewritten into a tight loop by removing test for
   various impossible conditions and using the infrastructure in this
   patch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:41 +01:00
Christoph Hellwig 8389998ae9 [POWERPC] spufs: move prio to spu_context
It doesn't make any sense to have a priority field in the physical spu
structure.  Move it into the spu context instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:40 +01:00
Christoph Hellwig 6a0641e510 [POWERPC] spufs: state_mutex cleanup
Various cleanups in code surrounding the state semaphore:

 - inline spu_acquire/spu_release
 - cleanup spu_acquire_* and add kerneldoc comments to these functions
 - remove spu_release_exclusive and replace it with spu_release

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:55:40 +01:00
Christoph Hellwig 650f8b0291 [POWERPC] spufs: simplify state_mutex
The r/w semaphore to lock the spus was overkill and can be replaced
with a mutex to make it faster, simpler and easier to debug.  It also
helps to allow making most spufs interruptible in future patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:37 +01:00
Christoph Hellwig 202557d29e [POWERPC] spufs: sched.c cleanups
Various cleanups to sched.c that don't change the global control flow:

 - add kerneldoc comments to various functions
 - add spu_ prefixes to various functions
 - add/remove context from the runqueue in bind/unbind_context as
   it's part of the logical operation
 - add a call to put_active_spu to spu_unbind_contex as it's logically
   part of the unbind operation

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:36 +01:00
Christoph Hellwig 81998bafe2 [POWERPC] spufs: bind_context sets SPU_STATE_RUNNABLE
Only bind_context/unbind_context change the spu context state.  Thus
we can move all assignents of SPU_STATE_RUNNABLE into bind_context,
which parallels the unbind side aswell.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:36 +01:00
Christoph Hellwig aa56c16807 [POWERPC] spufs: remove superfluous SPU_STATE_SAVED assignments
unbind_context already sets the context state to SPU_STATE_SAVED, thus
the spu_deactivate callers don't need to do it again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:36 +01:00
Christoph Hellwig 5cb23afc9e [POWERPC] spufs: remove empty last line in run.c
Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:35 +01:00
Christoph Hellwig 30a6c337dc [POWERPC] spufs: remove SPU_CONTEXT_PREEMPT
Remove the SPU_CONTEXT_PREEMPT define.  It's unused and won't be used
in this form after the scheduler rework.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13 21:52:35 +01:00
Kumar Gala f909f10621 Merge branch '83xx' into for_paulus 2007-02-13 12:51:38 -06:00
Timur Tabi a20d0ce694 [POWERPC] 83xx: Updated mpc834x_itx_defconfig
This patch updates the defconfig for the MPC8349E-mITX.  In addition to picking
up changes from recent kernels, disables support for e100 (which doesn't ship
with the system), turns off input devices, turns on some I2C support, turns
off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns
off USB gadget support (HW not yet supported), turns on DOS FS support, and
turns off kernel debugging.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 12:51:20 -06:00
Timur Tabi 8c4a013da8 [POWERPC] 83xx: Add support for MPC8349E-mITX-GP
This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of
the MPC8349E-mITX.

USB is disabled because the only USB port is not setup properly by
firmware/kernel

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 12:48:56 -06:00
Andy Fleming eb11a720a8 [POWERPC] 85xx: Add a defconfig for the 8568 MDS
Add defconfig for the MPC8568 MDS reference board

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 12:36:53 -06:00
Andy Fleming c2882bb12c [POWERPC] 85xx: Add support for the 8568 MDS board
Add support for the MPC8568 MDS reference board

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-13 12:36:23 -06:00
Andi Kleen 126b192236 [PATCH] x86-64: Remove mk_pte_phys()
- Convert last user to pfn_pte
- Remove mk_pte_phys

Suggested by Jan Beulich

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Jan Beulich 22c5ace729 [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386
After updating several machines to 2.6.20, I can't boot  anymore the single
one of them that supports the NX bit and is configured as a 32-bit system.

My understanding is that the VDSO changes in 2.6.20-rc7 were not fully
cooked, in that with that config option enabled VDSO_SYM(x) now equals
x, meaning that an address in the fixmap area is now being passed to
apps via AT_SYSINFO. However, the page is mapped with PAGE_READONLY
rather than PAGE_READONLY_EXEC.

I'm not certain whether having app code go through the fixmap area is
intended, but in case it is here is the simple patch that makes things work
again.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Giuliano Procida 98838ec984 [PATCH] i386: fix 32-bit ioctls on x64_32
[MTRR] fix 32-bit ioctls on x64_32

Signed-off-by: Giuliano Procida <giuliano.procida@googlemail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Andi Kleen 62cc49396e [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64
Trivial cleanup.

Only change is that it is always compiled in now on x86-64 like on i386.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Rusty Russell 40d22c1b56 [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header.
Extern declarations belong in headers.  Times, they are a'changin.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2007-02-13 13:26:26 +01:00
Rusty Russell 2a57ff1a70 [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c
When I implemented the DECLARE_PER_CPU(var) macros, I was careful that
people couldn't use "var" in a non-percpu context, by prepending
percpu__.  I never considered that this would allow them to overload
the same name for a per-cpu and a non-percpu variable.

It is only one of many horrors in the i386 boot code, but let's rename
the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr,
that's something else...)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2007-02-13 13:26:26 +01:00
Rusty Russell 105fddb862 [PATCH] i386: Move mce_disabled to asm/mce.h
Allows external actors to disable mce.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2007-02-13 13:26:26 +01:00
Rusty Russell 992af68147 [PATCH] i386: paravirt unhandled fallthrough
The current code simply calls "start_kernel" directly if we're under a
hypervisor and no paravirt_ops backend wants us, because paravirt.c
registers that as a backend.

This was always a vain hope; start_kernel won't get far without setup.
It's also impossible for paravirt_ops backends which don't sit in the
arch/i386/kernel directory: they can't link before paravirt.o anyway.

Keep it simple: if we pass all the registered paravirt probes, BUG().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Ralf Baechle 9af3cf0546 [PATCH] x86_64: Wire up compat epoll_pwait
> Which remembers me that I think that MIPS is using the non-compat version
> of sys_epoll_pwait for compat syscalls. But maybe MIPS doesn't need a compat
> syscall for some reason. Dunno.

Which reminds me that x86_64 i386 compat doesn't wire up sys_epoll_pwait ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Andi Kleen 9fbbd4dd17 [PATCH] x86: Don't require the vDSO for handling a.out signals
and in other strange binfmts. vDSO is not necessarily mapped there.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:26 +01:00
Alan 120fad7240 [PATCH] i386: Fix Cyrix MediaGX detection
The old Cyrix 5520 CPU detection code relied upon the PCI layer setup being
done earlier than the CPU setup, which is no longer true.  Fortunately we
know that if the processor is a MediaGX we can do type 1 pci config
accesses to check the companion chip.  We thus do those directly and from
this find the 5520 and implement the workarounds for the timer problem

Original report from takada@mbf.nifty.com, I sent a proposed patch which
Takara then corrected, tested and sent back to the list on 10th January.

Submitting for merging as it seems to have been missed

AK: Changed to use pci-direct.h and fix warning for !CONFIG_PCI (later
AK: originally from akpm)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: <takada@mbf.nifty.com>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:26 +01:00
Andi Kleen 7de6d3618b [PATCH] i386: Fix warning in cpu initialization
Fix bogus warning

linux/arch/i386/kernel/cpu/transmeta.c:12: warning: ‘cpu_freq’ may be used uninitialized in this function

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Andi Kleen 2ba1ff2b79 [PATCH] i386: Fix warning in microcode.c
Fix bogus gcc warning

linux/arch/i386/kernel/microcode.c:387: warning: ‘new_mc’ may be used uninitialized in this function

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Andi Kleen 0a4599c894 [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs
For i386/x86-64.

Straight forward -- just reuse the Family 0xf code.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Andi Kleen f790cd30d0 [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo
Just various new acronyms. The new popcnt bit is in the middle
of Intel space. This looks a little weird, but I've been assured
it's ok.

Also I fixed RDTSCP for i386 which was at the wrong place.

For i386 and x86-64.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Andi Kleen 1a1eecd1c2 [PATCH] i386: Remove fastcall in paravirt.[ch]
Not needed because fastcall is always default now

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Eric W. Biederman 2fb12a9bca [PATCH] x86-64: survive having no irq mapping for a vector
Occasionally the kernel has bugs that result in no irq being found for a
given cpu vector.  If we acknowledge the irq the system has a good chance
of continuing even though we dropped an irq message.  If we continue to
simply print a message and not acknowledge the irq the system is likely to
become non-responsive shortly there after.

AK: Fixed compilation for UP kernels

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Luigi Genoni" <luigi.genoni@pirelli.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
TAKADA Yoshihito bcde1ebb81 [PATCH] i386: geode configuration fixes
Original code doesn't write back to CCR4 register.  This patch reflects a
value of a register.

Cc: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Chuck Ebbert 86c4183742 [PATCH] i386: add option to show more code in oops reports
Sometimes developers need to see more object code in an oops report,
e.g. when kernel may be corrupted at runtime.

Add the "code_bytes" option for this.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
Evgeniy Polyakov 8469adde59 [PATCH] x86-64: Minor patch for compilation warning in x86_64 signal code
If DEBUG_SIG is enbaled in source code, ia32_signal.c compiles with warning
due to wrong format string.  Attached patch fixes that.  It is quite minor
update, since by default DEBUG_SIG is not enabled and can not be turned on
without code modification.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
Roland Dreier 3e94fb8f54 [PATCH] x86-64: avoid warning message livelock
I've seen my box paralyzed by an endless spew of

    rtc: lost some interrupts at 1024Hz.

messages on the serial console.  What seems to be happening is that
something real causes an interrupt to be lost and triggers the
message.  But then printing the message to the serial console (from
the hpet interrupt handler) takes more than 1/1024th of a second, and
then some more interrupts are lost, so the message triggers again....

Fix this by adding a printk_ratelimit() before printing the warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:25 +01:00
Benjamin Romer ee4eff6ff6 [PATCH] x86-64: update IO-APIC dest field to 8-bit for xAPIC
On the Unisys ES7000/ONE system, we encountered a problem where performing
a kexec reboot or dump on any cell other than cell 0 causes the system
timer to stop working, resulting in a hang during timer calibration in the
new kernel.

We traced the problem to one line of code in disable_IO_APIC(), which needs
to restore the timer's IO-APIC configuration before rebooting.  The code is
currently using the 4-bit physical destination field, rather than using the
8-bit logical destination field, and it cuts off the upper 4 bits of the
timer's APIC ID.  If we change this to use the logical destination field,
the timer works and we can kexec on the upper cells.  This was tested on
two different cells (0 and 2) in an ES7000/ONE system.

For reference, the relevant Intel xAPIC spec is kept at
ftp://download.intel.com/design/chipsets/e8501/datashts/30962001.pdf,
specifically on page 334.

Signed-off-by: Benjamin M Romer <benjamin.romer@unisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
Robert P. J. Day a4af60aa64 [PATCH] i386: Remove unused kernel config option X86_XADD
Remove the unused kernel config option X86_XADD, which is unused in any
source or header file.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
Bob Picco f0a5a58aa8 [PATCH] x86-64: clean up sparsemem memory_present call
Eliminate arch specific memory_present call x86_64 NUMA by utilizing
sparse_memory_present_with_active_regions.

Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:25 +01:00
Jan Beulich 47a55cd795 [PATCH] i386: entry.S END/ENDPROC annotations
Annotate i386/kernel/entry.S with END/ENDPROC to assist disassemblers and
other analysis tools.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:24 +01:00
takada 2632f01a66 [PATCH] i386: support Classic MediaGXm
I hope to support "classic" MediaGXm in kernel.

The DIR1 register of MediaGXm( or Geode) shows the following values for
identify CPU.  For example, My MediaGXm shows 0x42.

We can read National Semiconductor's datasheet without any NDAs.
  http://www.national.com/pf/GX/GXLV.html

from datasheets:
DIR1
0x30 - 0x33 GXm rev. 1.0 - 2.3
0x34 - 0x4f GXm rev. 2.4 - 3.x
0x5x        GXm rev. 5.0 - 5.4
0x6x        GXLV
0x7x         (unknow)
0x8x	    Gx1

In nsc driver of X, accept 0x30 through 0x82. What will 0x7x mean?

Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Randy Dunlap 3101673b65 [PATCH] i386: avoid gcc extension
setcc() in math-emu is written as a gcc extension statement expression
macro that returns a value.  However, it's not used that way and it's not
needed like that, so just make it a inline function so that we
don't use an extension when it's not needed.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:24 +01:00
H. Peter Anvin 30b82ea08c [PATCH] i386: All Transmeta CPUs have constant TSCs
All Transmeta CPUs ever produced have constant-rate TSCs.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:24 +01:00
Ingo Molnar 5d0e600d90 [PATCH] x86: fix laptop bootup hang in init_acpi()
During kernel bootup, a new T60 laptop (CoreDuo, 32-bit) hangs about
10%-20% of the time in acpi_init():

 Calling initcall 0xc055ce1a: topology_init+0x0/0x2f()
 Calling initcall 0xc055d75e: mtrr_init_finialize+0x0/0x2c()
 Calling initcall 0xc05664f3: param_sysfs_init+0x0/0x175()
 Calling initcall 0xc014cb65: pm_sysrq_init+0x0/0x17()
 Calling initcall 0xc0569f99: init_bio+0x0/0xf4()
 Calling initcall 0xc056b865: genhd_device_init+0x0/0x50()
 Calling initcall 0xc056c4bd: fbmem_init+0x0/0x87()
 Calling initcall 0xc056dd74: acpi_init+0x0/0x1ee()

It's a hard hang that not even an NMI could punch through!  Frustratingly,
adding printks or function tracing to the ACPI code made the hangs go away
...

After some time an additional detail emerged: disabling the NMI watchdog
made these occasional hangs go away.

So i spent the better part of today trying to debug this and trying out
various theories when i finally found the likely reason for the hang: if
acpi_ns_initialize_devices() executes an _INI AML method and an NMI
happens to hit that AML execution in the wrong moment, the machine would
hang.  (my theory is that this must be some sort of chipset setup method
doing stores to chipset mmio registers?)

Unfortunately given the characteristics of the hang it was sheer
impossible to figure out which of the numerous AML methods is impacted
by this problem.

As a workaround i wrote an interface to disable chipset-based NMIs while
executing _INI sections - and indeed this fixed the hang.  I did a
boot-loop of 100 separate reboots and none hung - while without the patch
it would hang every 5-10 attempts.  Out of caution i did not touch the
nmi_watchdog=2 case (it's not related to the chipset anyway and didnt
hang).

I implemented this for both x86_64 and i686, tested the i686 laptop both
with nmi_watchdog=1 [which triggered the hangs] and nmi_watchdog=2, and
tested an Athlon64 box with the 64-bit kernel as well. Everything builds
and works with the patch applied.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-13 13:26:24 +01:00
Muli Ben-Yehuda 310adfdd91 [PATCH] x86-64: robustify bad_dma_address handling
- set bad_dma_address explicitly to 0x0
- reserve 32 pages from bad_dma_address and up
- WARN_ON() a driver feeding us bad_dma_address

Thanks to Leo Duran <leo.duran@amd.com> for the suggestion.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Job Mason <jdmason@kudzu.us>
2007-02-13 13:26:24 +01:00
Andi Kleen fc986db4fc [PATCH] x86-64: Don't reserve ROMs
We trust the e820 table, so explicitely reserving ROMs shouldn't
be needed.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Andi Kleen 00edefae05 [PATCH] x86-64: Fix off by one error in IOMMU boundary checking
Should be harmless because there is normally no memory there, but
technically it was incorrect.

Pointed out by Leo Duran

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Zachary Amsden ffb6017563 [PATCH] x86-64: x86_64 - Fix FS/GS registers for VT execution
Initialize FS and GS to __KERNEL_DS as well.  The actual value of them is not
important, but it is important to reload them in protected mode.  At this time,
they still retain the real mode values from initial boot.  VT disallows
execution of code under such conditions, which means hardware virtualization
can not be used to boot the kernel on Intel platforms, making the boot time
painfully slow.

This requires moving the GS load before the load of GS_BASE, so just move
all the segments loads there to keep them together in the code.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Andi Kleen 9a11ff6827 [PATCH] x86-64: Unexport __supported_pte_mask
The symbol is needed to manipulate page tables, and modules shouldn't
do that.

Leftover from 2.4, but no in tree module should need it now.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Andi Kleen f49481bc50 [PATCH] x86-64: Check return value of putreg in PTRACE_SETREGS
This means if an illegal value is set for the segment registers there
ptrace will error out now with an errno instead of silently ignoring
it.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Jack Steiner 2f7a2a79c3 [PATCH] x86-64: - Ignore long SMI interrupts in clock calibration code - update 1
Add failsafe mechanism to HPET/TSC clock calibration.

	Signed-off-by: Jack Steiner <steiner@sgi.com>

Updated to include failsafe mechanism & additional community feedback.
Patch built on latest 2.6.20-rc4-mm1 tree.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:24 +01:00
Andreas Herrmann 6c5806cae5 [PATCH] i386: fix size_or_mask and size_and_mask
mtrr: fix size_or_mask and size_and_mask

This fixes two bugs in /proc/mtrr interface:
o If physical address size crosses the 44 bit boundary
  size_or_mask is evaluated wrong.
o size_and_mask limits width of physical base
  address for an MTRR to be less than 44 bits.

TBD: later patch had one more change, but I think that was bogus.
TBD: need to double check

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Alexey Dobriyan 016d6f3580 [PATCH] i386: Convert /proc/apm to seqfile
Byte-to-byte identical /proc/apm here.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Alexey Dobriyan ad4e680fb2 [PATCH] i386: use smp_call_function_single()
It will execure cpuid only on the cpu we need.

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Alexey Dobriyan d958f14332 [PATCH] i386: use smp_call_function_single()
It will execute rdmsr and wrmsr only on the cpu we need.

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Nicolas Kaiser edf8dd36b5 [PATCH] x86-64: Kconfig typos
Some typos in Kconfig.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Andi Kleen 8c40ad02e5 [PATCH] i386: Small cleanup to TLB flush code
- Remove outdated comment
- Use cpu_relax() in a busy loop

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Andi Kleen a98f0dd34d [PATCH] x86-64: Allow to run a program when a machine check event is detected
When a machine check event is detected (including a AMD RevF threshold
overflow event) allow to run a "trigger" program. This allows user space
to react to such events sooner.

The trigger is configured using a new trigger entry in the
machinecheck sysfs interface. It is currently shared between
all CPUs.

I also fixed the AMD threshold handler to run the machine
check polling code immediately to actually log any events
that might have caused the threshold interrupt.

Also added some documentation for the mce sysfs interface.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Jan Beulich 24ce0e96f2 [PATCH] x86-64: Tighten mce_amd driver MSR reads
while debugging an unrelated problem in Xen, I noticed odd reads from
non-existent MSRs. Having now found time to look why these happen, I
came up with below patch, which
- prevents accessing MCi_MISCj with j > 0 when the block pointer in
MCi_MISC0 is zero
- accesses only contiguous MCi_MISCj until a non-implemented one is
found
- doesn't touch unimplemented blocks in mce_threshold_interrupt at all
- gives names to two bits previously derived from MASK_VALID_HI (it
took me some time to understand the code without this)

The first three items, besides being apparently closer to the spec, should
namely help cutting down on the time mce_threshold_interrupt() takes.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Jan Beulich 9b35589756 [PATCH] x86: simplify notify_page_fault()
Remove all parameters from this function that aren't really variable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Venkatesh Pallipadi 44264261d8 [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in oprofile
Handle these 32 bit perfmon counter MSR writes cleanly in oprofile.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:23 +01:00
Venkatesh Pallipadi 90ce4bc454 [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in i386 nmi_watchdog
Change i386 nmi handler to handle 32 bit perfmon counter MSR writes cleanly.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Venkatesh Pallipadi 1676193937 [PATCH] x86-64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 nmi_watchdog
P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature,
only supports write of low 32 bits in Performance Monitoring Counters.
Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved
and should be zero.

This patch:

Change x86_64 nmi handler to handle this case cleanly.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Glauber de Oliveira Costa 4c3cbf75b2 [PATCH] x86-64: Use constant instead of raw number in x86_64 ioperm.c
This is a tiny cleanup to increase readability

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:22 +01:00
Glauber de Oliveira Costa c49c5330c9 [PATCH] x86-64: Remove fastcall references in x86_64 code
Unlike x86, x86_64 already passes arguments in registers.  The use of
regparm attribute makes no difference in produced code, and the use of
fastcall just bloats the code.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:22 +01:00
Rohit Seth 53fee04f31 [PATCH] x86-64: Fix fake numa for x86_64 machines with big IO hole
This patch resolves the issue of running with numa=fake=X on kernel command
line on x86_64 machines that have big IO hole.  While calculating the size
of each node now we look at the total hole size in that range.

Previously there were nodes that only had IO holes in them causing kernel
boot problems.  We now use the NODE_MIN_SIZE (64MB) as the minimum size of
memory that any node must have.  We reduce the number of allocated nodes if
the number of nodes specified on kernel command line results in any node
getting memory smaller than NODE_MIN_SIZE.

This change allows the extra memory to be incremented in NODE_MIN_SIZE
granule and uniformly distribute among as many nodes (called big nodes) as
possible.

[akpm@osdl.org: build fix]
Signed-off-by: David Rientjes <reintjes@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:22 +01:00
Rene Herman 3b3d5e1db6 [PATCH] i386: romsignature/checksum cleanup
Use adding __init to romsignature() (it's only called from probe_roms()
which is itself __init) as an excuse to submit a pedantic cleanup.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:22 +01:00
Ingo Molnar f9690982b8 [PATCH] i386: improve sched_clock() on i686
Clean up sched_clock() on i686: it will use the TSC if available and falls
back to jiffies only if the user asked for it to be disabled via notsc or
the CPU calibration code didnt figure out the right cpu_khz.

This generally makes the scheduler timestamps more finegrained, on all
hardware.  (the current scheduler is pretty resistant against asynchronous
sched_clock() values on different CPUs, it will allow at most up to a jiffy
of jitter.)

Also simplify sched_clock()'s check for TSC availability: propagate the
desire and ability to use the TSC into the tsc_disable flag, previously
this flag only indicated whether the notsc option was passed.  This makes
the rare low-res sched_clock() codepath a single branch off a read-mostly
flag.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Stephane Eranian 2ff2d3d747 [PATCH] i386: add idle notifier
Add a notifier mechanism to the low level idle loop.  You can register a
callback function which gets invoked on entry and exit from the low level idle
loop.  The low level idle loop is defined as the polling loop, low-power call,
or the mwait instruction.  Interrupts processed by the idle thread are not
considered part of the low level loop.

The notifier can be used to measure precisely how much is spent in useless
execution (or low power mode).  The perfmon subsystem uses it to turn on/off
monitoring.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Adrian Bunk 86a978837c [PATCH] i386: arch/i386/kernel/cpu/mcheck/mce.c should #include <asm/mce.h>
Every file should include the headers containing the prototypes for
it's global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Vivek Goyal f8657e1b55 [PATCH] i386: move startup_32() in text.head section
o Entry startup_32 was in .text section but it was accessing some init
  data too and it prompts MODPOST to generate compilation warnings.

WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100029) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100037) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to
.init.data:init_pg_tables_end from .text between '_text' (at offset
0xc0100099) and 'startup_32_smp'

o Can't move startup_32 to .init.text as this entry point has to be at the
  start of bzImage. Hence moved startup_32 to a new section .text.head and
  instructed MODPOST to not to generate warnings if init data is being
  accessed from .text.head section. This code has been audited.

o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug
  is not supported. Otherwise it generates more warnings

WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100126) and 'is486'
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100130) and 'is486'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Zachary Amsden 7c0b49f9d1 [PATCH] i386: Paravirt debug defaults off
Deliberate register clobber around performance critical inline code is great for
testing, bad to leave on by default.  Many people ship with DEBUG_KERNEL turned
on, so stop making DEBUG_PARAVIRT default on.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00
Zachary Amsden 90736e20e3 [PATCH] i386: Vmi timer race
Because timer code moves around, and we might eventually move our init to a
late_time_init hook, save and restore IRQs around this code because it is
definitely not interrupt safe.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:21 +01:00
Zachary Amsden ac3b6faff9 [PATCH] i386: Kprobe rpl fix
Kprobes bugfix for paravirt compatibility - RPL on the CS when inserting
BPs must match running kernel.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
CC: Eric Biederman <ebiederm@xmission.com>
2007-02-13 13:26:21 +01:00
Zachary Amsden 7b35520243 [PATCH] i386: Profile pc badness
Profile_pc was broken when using paravirtualization because the
assumption the kernel was running at CPL 0 was violated, causing
bad logic to read a random value off the stack.

The only way to be in kernel lock functions is to be in kernel
code, so validate that assumption explicitly by checking the CS
value.  We don't want to be fooled by BIOS / APM segments and
try to read those stacks, so only match KERNEL_CS.

I moved some stuff in segment.h to make it prettier.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:21 +01:00
Zachary Amsden bbab4f3bb7 [PATCH] i386: vMI timer patches
VMI timer code.  It works by taking over the local APIC clock when APIC is
configured, which requires a couple hooks into the APIC code.  The backend
timer code could be commonized into the timer infrastructure, but there are
some pieces missing (stolen time, in particular), and the exact semantics of
when to do accounting for NO_IDLE need to be shared between different
hypervisors as well.  So for now, VMI timer is a separate module.

[Adrian Bunk: cleanups]

Subject: VMI timer patches
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Zachary Amsden 7ce0bcfd16 [PATCH] i386: vMI backend for paravirt-ops
Fairly straightforward implementation of VMI backend for paravirt-ops.

[Adrian Bunk: some cleanups]

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Zachary Amsden ae5da273fe [PATCH] i386: SMP boot hook for paravirt
Add VMI SMP boot hook.  We emulate a regular boot sequence and use the same
APIC IPI initiation, we just poke magic values to load into the CPU state when
the startup IPI is received, rather than having to jump through a real mode
trampoline.

This is all that was needed to get SMP to work.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Zachary Amsden 8b15114434 [PATCH] i386: iOPL handling for paravirt guests
I found a clever way to make the extra IOPL switching invisible to
non-paravirt compiles - since kernel_rpl is statically defined to be zero
there, and only non-zero rpl kernel have a problem restoring IOPL, as popf
does not restore IOPL flags unless run at CPL-0.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Zachary Amsden 9226d125d9 [PATCH] i386: paravirt CPU hypercall batching mode
The VMI ROM has a mode where hypercalls can be queued and batched.  This turns
out to be a significant win during context switch, but must be done at a
specific point before side effects to CPU state are visible to subsequent
instructions.  This is similar to the MMU batching hooks already provided.
The same hooks could be used by the Xen backend to implement a context switch
multicall.

To explain a bit more about lazy modes in the paravirt patches, basically, the
idea is that only one of lazy CPU or MMU mode can be active at any given time.
 Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of
multiple PTE updates (say, inside a remap loop), but to avoid keeping some
kind of state machine about when to flush cpu or mmu updates, we just allow
one or the other to be active.  Although there is no real reason a more
comprehensive scheme could not be implemented, there is also no demonstrated
need for this extra complexity.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Zachary Amsden c119ecce89 [PATCH] MM: page allocation hooks for VMI backend
The VMI backend uses explicit page type notification to track shadow page
tables.  The allocation of page table roots is especially tricky.  We need to
clone the root for non-PAE mode while it is protected under the pgd lock to
correctly copy the shadow.

We don't need to allocate pgds in PAE mode, (PDPs in Intel terminology) as
they only have 4 entries, and are cached entirely by the processor, which
makes shadowing them rather simple.

For base page table level allocation, pmd_populate provides the exact hook
point we need.  Also, we need to allocate pages when splitting a large page,
and we must release pages before returning the page to any free pool.

Despite being required with these slightly odd semantics for VMI, Xen also
uses these hooks to determine the exact moment when page tables are created or
released.

AK: All nops for other architectures

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Adrian Bunk 90611fe923 [PATCH] i386: arch/i386/kernel/e820.c should #include <asm/setup.h
Every file should #include the headers containing the prototypes for
its global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:21 +01:00
Catalin Marinas 006e84ee3a [PATCH] x86-64: do not always end the stack trace with ULONG_MAX
It makes more sense to end the stack trace with ULONG_MAX only if
nr_entries < max_entries.  Otherwise, we lose one entry in the long stack
traces and cannot know whether the trace was complete or not.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
Karsten Weiss 5558870bfb [PATCH] x86-64: improved iommu documentation
- add SWIOTLB config help text
- mention Documentation/x86_64/boot-options.txt in
  Documentation/kernel-parameters.txt
- remove the duplication of the iommu kernel parameter documentation.
- Better explanation of some of the iommu kernel parameter options.
- "32MB<<order" instead of "32MB^order".
- Mention the default "order" value.
- list the four existing PCI-DMA mapping implementations of arch x86_64
- group the iommu= option keywords by PCI-DMA mapping implementation.
- Distinguish iommu= option keywords from number arguments.
- Explain the meaning of DAC and SAC.

Signed-off-by: Karsten Weiss <knweiss@science-computing.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:21 +01:00
OGAWA Hirofumi 26054ed02b [PATCH] mmconfig: Move e820 check into pci_mmcfg_reject_broken()
This is just cleanup. It moves to e820 check into pci_mmcfg_reject_broken().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
OGAWA Hirofumi 56829d1982 [PATCH] mmconfig: fix unreachable_devices()
Currently, unreachable_devices() compares value of mmconfig and value
of conf1. But it doesn't check the device is reachable or not.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
OGAWA Hirofumi 429d512e53 [PATCH] mmconfig: minor cleanup in mmconfig code
This just cleans up.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
OGAWA Hirofumi a4ec1b2c9f [PATCH] mmconfig: remove #define MMCONFIG_APER_XXX
MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
OGAWA Hirofumi 44de0203fa [PATCH] mmconfig: Reject a broken MCFG tables on Asus etc
This rejects broken MCFG tables on Asus. When the table
looks bogus just disable mmconfig

Arjan and Andi suggested this.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
OGAWA Hirofumi faed197b7b [PATCH] mmconfig: Fix x86_64 ioremap base_address
Current mmconfig has some problems of remapped range.

a) In the case of broken MCFG tables on Asus etc., we need to remap 256M
   range, but currently only remap 1M.

b) The base address always corresponds to bus number 0, but currently we
   are assuming it corresponds to start bus number.

This patch fixes the above problems.

(akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use
it, rather than try to work around things).

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Olivier Galibert 6a0668fc41 [PATCH] mmconfig: Reserve resources but only when we're sure about them.
Put back the resource reservation as per
4c6e052adf but use it *only* when the range(s)
come from a chipset probe instead of the bios.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Olivier Galibert 9358c693c5 [PATCH] mmconfig: Detect and support the E7520 and the 945G/GZ/P/PL
It seems that the only way to reliably support mmconfig in the presence of
funky biosen is to detect the hostbridge and read where the window is mapped
from its registers.  Do that for the E7520 and the 945G/GZ/P/PL for a start.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Olivier Galibert 5f027387bb [PATCH] i386: Only call unreachable_devices() when type 1 is available.
unreachable_devices compares between the results of pci configuration accesses
through type1 and mmconfig, so it should be called only if type1 actually
works in the first place.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Olivier Galibert b78673944b [PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64
i386 and x86-64 pci mmconfig code have a lot in common.  So share what's
shareable between the two.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Maciej W. Rozycki 2e188938ab [PATCH] i386: Fix a typo in an IRQ handler name
The "fasteoi" IRQ handler is named "fasteio" incorrectly.  This is a fix.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Jeremy Fitzhardinge 464d1a78fb [PATCH] i386: Convert i386 PDA code to use %fs
Convert the PDA code to use %fs rather than %gs as the segment for
per-processor data.  This is because some processors show a small but
measurable performance gain for reloading a NULL segment selector (as %fs
generally is in user-space) versus a non-NULL one (as %gs generally is).

On modern processors the difference is very small, perhaps undetectable.
Some old AMD "K6 3D+" processors are noticably slower when %fs is used
rather than %gs; I have no idea why this might be, but I think they're
sufficiently rare that it doesn't matter much.

This patch also fixes the math emulator, which had not been adjusted to
match the changed struct pt_regs.

[frederik.deweerdt@gmail.com: fixit with gdb]
[mingo@elte.hu: Fix KVM too]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Ian Campbell <Ian.Campbell@XenSource.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Amul Shah 54413927f0 [PATCH] x86-64: x86_64-make-the-numa-hash-function-nodemap-allocation fix fix
- Removed an extraneous debug message from allocate_cachealigned_map

- Changed extract_lsb_from_nodes to return 63 for the case where there was
  only one memory node.  The prevents the creation of the dynamic hashmap.

- Changed extract_lsb_from_nodes to use only the starting memory address of
  a node.  On an ES7000, our nodes overlap the starting and ending address,
  meaning, that we see nodes like

	00000 - 10000
	10000 - 20000

  But other systems have nodes whose start and end addresses do not overlap.
   For example:

	00000 - 0FFFF
	10000 - 1FFFF

  In this case, using the ending address will result in an LSB much lower
  than what is possible.  In this case an LSB of 1 when in reality it should
  be 16.

Cc: Andi Kleen <ak@suse.de>
Cc: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:20 +01:00
Amul Shah 076422d2af [PATCH] x86-64: Allocate the NUMA hash function nodemap dynamically
Remove the statically allocated memory to NUMA node hash map in favor of a
dynamically allocated memory to node hash map (it is cache aligned).

This patch has the nice side effect in that it allows the hash map to grow
for systems with large amounts of memory (256GB - 1TB), but suffer from
having small PCI space tacked onto the boot node (which is somewhere
between 192MB to 512MB on the ES7000).

Signed-off-by: Amul Shah <amul.shah@unisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:19 +01:00
Andi Kleen 0812a579c9 [PATCH] x86-64: Add __copy_from_user_nocache
This does user copies in fs write() into the page cache with write combining.
This pushes the destination out of the CPU's cache, but allows higher bandwidth
in some case.

The theory is that the page cache data is usually not touched by the
CPU again and it's better to not pollute the cache with it. Also it is a little
faster.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:19 +01:00
Andi Kleen ee55c0be30 [PATCH] i386: Update defconfig
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:19 +01:00
Andi Kleen 287eeb5e02 [PATCH] x86-64: Update defconfig
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:19 +01:00
Len Brown 7f8f97c3cc ACPI: acpi_table_parse() now returns success/fail, not count
Returning count for tables that are supposed to be unique
was useless and confusing.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-13 02:58:52 -05:00
Paul Mundt 401e9093a3 sh: Compile fix for heartbeat consolidation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 15:46:39 +09:00
Paul Mundt 3b4d953962 sh: heartbeat consolidation for banked LEDs.
This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 15:42:28 +09:00
Kumar Gala 54c66f6d78 Merge branch 'master' into 85xx 2007-02-12 23:57:21 -06:00
Benjamin Herrenschmidt 17e0e27020 [POWERPC] spufs: Fix bitrot of the SPU mmap facility
It looks like we've had some serious bitrot there mostly due to tracking
of address_space's of mmap'ed files getting out of sync with the actual
mmap code. The mfc, mss and psmap were not tracked properly and thus
not invalidated on context switches (oops !)

I also removed the various file->f_mapping = inode->i_mapping;
assignments that were done in the other open() routines since that
is already done for us by __dentry_open.

One improvement we might want to do later is to assign the various
ctx-> fields at mmap time instead of file open/close time so that we
don't call unmap_mapping_range() on thing that have not been mmap'ed

Finally, I added some smp_wmb's after assigning the ctx-> fields to make
sure they are visible to other CPUs. I don't think this is really
necessary as I suspect locking in the fs layer will make that happen
anyway but better safe than sorry.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:54 +11:00
Benjamin Herrenschmidt 44430e0d39 [POWERPC] powerpc: Remove SPU struct pages for PS3
Struct page are no longer needed for SPUs, so let's not create them
on PS3 anymore.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:54 +11:00
Benjamin Herrenschmidt 78bde53e35 [POWERPC] spufs: remove need for struct page for SPEs
This patch removes the need for struct page for SPE local store
and registers from spufs. It also makes the locking much more
obvious and no longer relying on the truncate logic black magic
for protecting against races between unmap_mapping_range() and
new pages faulted in. It does so by switching to a nopfn() handler
and using the new vm_insert_pfn() to setup the PTEs itself while
holding a lock on the SPE.

The nice thing is that this patch actually removes a lot more code
than it adds :-)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Sylvain Munaut 9724b86f07 [POWERPC] Small cleanup of EFIKA platform
The efika platform used three files efika-pci.c efika-setup.c and
a 2 line efika.h to link the two. The total of code in those is
really not much and therefore, I think they're better merged
in a single file.

There is absolutely _no_code_change_ at all, just merged the files.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Sylvain Munaut 46e4cf6c14 [POWERPC] Fix unbalanced of_node_{get,put} in efika-setup.c
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Sylvain Munaut 82a03b9227 [POWERPC] Use common 52xx of_platform probe code for EFIKA
Now that the device tree has the good properties, we can
remove all the efika_init code by a single call to common code.

While we're modifying that file, a few whitespaces/alignement/typo
fixes are made (nothing significant).

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Sylvain Munaut b6a591b2c5 [POWERPC] Restore 'proper' link order in platform
The 52xx was put before CHRP to allow EFIKA to be recognized
properly. Now the efika tree is fixed up in prom_init so
no need for this ugly hack. So we restore the 'normal'
order.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Sylvain Munaut 88fd2a9d68 [POWERPC] Add device tree fixups for the EFIKA
We make the efika device tree compliant with the defined bindings
(at least compliant enough). This is mostly done by mangling
the device_type and compatible properties, but also adding
some missing bits.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Grant Likely 05cbbc692f [POWERPC] mpc5200 device tree bindings refinement
Much needed refinement of mpc5200 device tree binding specifications.

Short list:
- drop mpc52xx designator; only two supported chips exist, 5200 and 5200b.
  It's premature to refer to them as '52xx'.
- Specify optional 'model' and 'revision' properties in the soc5200 node
- Specify reqiured 'cell-index' property to identify between multiple SOC
  devices of the same type.  (Useful for arbitrating shared register access)
- Specify optional 'port-number' property for adjusting the logical serial
  port assignments.
- Specify optional 'has-wdt' property for gpt0 node.
- Add system-frequency property to soc5200 node

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Grant Likely e3aba81d15 [POWERPC] Fixup mp5200 drivers to match device tree changes
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Stephen Rothwell 40d244d69a [POWERPC] correct a prototype
This rids us of a warning.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:52 +11:00
Stefan Roese ab9367e38f [POWERPC] ppc: Add support for AMCC Taishan 440GX eval board
This patch adds support for the AMCC Taishan PPC440GX evaluation
board.

This is still an arch/ppc port. I'm aware that the move of
4xx to arch/powerpc is making good progress right now. So this
patch is mainly intended to make the Taishan support available
for the community right now.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:52 +11:00
Benjamin Herrenschmidt 7ac9a13717 [POWERPC] Fix vDSO page count calculation
The recent vDSO consolidation patches broke powerpc due to a mistake
in the definition of MAXPAGES constants. This fixes it by moving to
a dynamically allocated array of pages instead as I don't like much
hard coded size limits. Also move the vdso initialisation to an initcall
since it doesn't really need to be done -that- early.

Applogies for not catching the breakage earlier, Roland _did_ CC me on
his patches a while ago, I got busy with other things and forgot to test
them.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:52 +11:00
Olaf Hering 2d99c41f05 [POWERPC] Mark winbond IDE PCI resources with start 0 as unassigned
libata calls pci_request_regions to claim PCI BAR 0 - 5
pci_request_regions fails if one of the regions cant be claimed.
bar 5 has start == 0,  __request_resource will fail.

Tested on a p630 in SMP mode with pata_sl82c105

 00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
         Interrupt: pin A routed to IRQ 86
         Region 0: I/O ports at 3fd3000f000 [size=8]
         Region 1: I/O ports at 3fd3000f010 [size=4]
         Region 2: I/O ports at 3fd3000f020 [size=8]
         Region 3: I/O ports at 3fd3000f030 [size=4]
         Region 4: I/O ports at 3fd3000f040 [size=16]
         Region 5: I/O ports at 3fd30000000 [size=16]
 00: ad 10 05 01 41 01 80 02 05 8f 01 01 08 48 80 00
 10: 01 f0 00 00 11 f0 00 00 21 f0 00 00 31 f0 00 00
 20: 41 f0 00 00 01 00 00 00 00 00 00 00 00 00 00 00
 30: 00 00 00 00 00 00 00 00 00 00 00 00 56 01 02 28
 40: b3 08 ff 00 09 09 00 00 09 09 00 00 09 09 00 00
 50: 09 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 70: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 name             "ide"
 linux,phandle    00d5cdc0 (14011840)
 assigned-addresses 81001910 00000000 0000f000 00000000 00000008 81001914
                  00000000 0000f010 00000000 00000004 81001918 00000000
                  0000f020 00000000 00000008 8100191c 00000000 0000f030
                  00000000 00000004 81001920 00000000 0000f040 00000000
                  00000010 81001924 00000000 00000000 00000000 00000010
 interrupts       00000003
 built-in
 #size-cells      00000000
 #address-cells   00000001
 device_type      "ide"
 reg              00001900 00000000 00000000 00000000 00000000
                  41001910 00000000 00000000 00000000 00000008
                  41001914 00000000 00000000 00000000 00000004
                  41001918 00000000 00000000 00000000 00000008
                  4100191c 00000000 00000000 00000000 00000004
                  41001920 00000000 00000000 00000000 00000010
                  41001924 00000000 00000000 00000000 00000010
 compatible       "pci10ad,105"
                  "pciclass,01018f"
 ibm,fw-slot-number 00000000
 fast-back-to-back
 devsel-speed     00000001
 max-latency      00000028 (40)
 min-grant        00000002
 class-code       0001018f (65935)
 revision-id      00000005
 device-id        00000105 (261)
 vendor-id        000010ad (4269)
 ibm,loc-code     "U0.1-P1/Q6"

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:52 +11:00
Akira Iguchi cbca567ea5 [POWERPC] Celleb: improve MMU hashtable locking
Disabling IRQ is required only in invalidation.  This changes
"spin_lock_irqsave" to "spin_lock" in other ops.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:51 +11:00
David Gibson 1f1fec9458 [POWERPC] Remove ibm4{xx,4x}.h from arch/powerpc
ARCH=powerpc should not use the ghastly un-multiplatformable tangle of
includes that starts with asm-ppc/ibm4xx.h.  This patch removes a
compile-breaking include of it from head_44x.S.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 14:59:52 +11:00
Becky Bruce 8ce0a7df6e [POWERPC] 85xx: Don't write reserved values to MAS1[TSIZE]
Some of the current tlbwe instructions early on in head_fsl_booke.S take
advantage of unarchitected behavior that allows the writing of reserved
values to the TSIZE field.  This patch corrects that, as well as an error
where an uninitialized (by linux) value was written into a MAS register and
used for a tlbwe.

Correct this for both arch/ppc and arch/powerpc.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-12 21:32:38 -06:00
Kumar Gala edacf6bb7e Merge branch 'master' into 85xx 2007-02-12 21:27:10 -06:00
Paul Mackerras fe6af6faec Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2007-02-13 13:28:00 +11:00
Paul Mundt ca43ecbf6e sh: Kill dead/unused ISA code from __ioremap().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt b37814352d sh: Fix syscall numbering breakage.
We accidentally broke the inotify syscalls, fix those up again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt 5904539b7f sh: dcache write-back for R7780RP PIO.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt 0072032d7b sh: Switch to local TLB flush variants in additional callsites.
Convert some of the global flush users over to using the local variants
that don't need to use the global routines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt ea9af69481 sh: Local TLB flushing variants for SMP prep.
Rename the existing flush routines to local_ variants for use by
the IPI-backed global flush routines on SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt 11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt aec5e0e1c1 sh: Use a per-cpu ASID cache.
Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Andrew Morton 506b85f411 sh: add SH_CLK_MD Kconfig default.
This option needs a default - otherwise `make allmodconfig' gets
stuck in an infinite loop.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Nobuhiro Iwamatsu dbbfa2da27 sh: Fixup SHMIN INTC register definitions.
Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss 9f8a5e3a44 sh: SH-DMAC compile fixes
This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss 6dcda6f1ec sh: add SH7760 IPR IRQ data
Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Nobuhiro Iwamatsu 86b67ef751 sh: Fix handle_BUG() compile error.
handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for
CONFIG_BUG, make sure it's not built when CONFIG_BUG=n.

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt adac957096 sh: Don't set reserved _PAGE_WT bit on SH-3.
Only SH-4 needs to set _PAGE_WT when using write-through caching,
don't attempt to set it on SH-3 where it ends up being a reserved
bit.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt 26b7a78c55 sh: Lazy dcache writeback optimizations.
This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt 7a847f8190 sh: More tidying for large base pages.
There were a few more things that needed fixing up, namely THREAD_SIZE
and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE
assumptions were being made.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Nobuhiro Iwamatsu aa4a5db52a sh: Solution Engine 770x IPR irq setup.
Fixups for external IPR IRQs for the SE770x FPGA.

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Nobuhiro Iwamatsu 08d2e099fb sh: Solution Engine 7750's defconfig update.
Update se7750_defconfig.

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Takashi YOSHII f725b5ee1e sh: shmin updates.
This fixes up shmin (and SH7706/SH7708) IPR support for some of the
recent API changes.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00