In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later
on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In
hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through
kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and
'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs.
Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails.
To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'.
Fixes: a91c3fb2f8 ("Add M2Tech hiFace USB-SPDIF driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 9ed2c993d7.
SET_CONFIG_REG writes to memory if register shadowing is enabled,
causing a VM fault.
NGG streamout is unstable anyway, so all UMDs should use legacy
streamout. I think Mesa is the only driver using NGG streamout.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
There is only one clocksource in RISC-V. The boot cpu initializes
that clocksource. No need to keep a percpu data structure.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA: FDBs, Learning and PTP
This is an assortment of functional fixes for the sja1105 switch driver
targeted for the "net" tree (although they apply on net-next just as
well).
Patch 1/5 ("net: dsa: sja1105: Fix broken learning with vlan_filtering
disabled") repairs a breakage introduced in the early development stages
of the driver: support for traffic from the CPU has broken "normal"
frame forwarding (based on DMAC) - there is connectivity through the
switch only because all frames are flooded.
I debated whether this patch qualifies as a fix, since it puts the
switch into a mode it has never operated in before (aka SVL). But
"normal" forwarding did use to work before the "Traffic support for
SJA1105 DSA driver" patchset, and arguably this patch should have been
part of that.
Also, it would be strange for this feature to be broken in the 5.2 LTS.
Patch 2/5 ("net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as
well") is a simplification of a previous FDB-related patch that is
currently in the 5.3 rc's.
Patches 3/5 - 5/5 fix various crashes found while running linuxptp over the
switch ports for extended periods of time, or in conjunction with other
error conditions. The fixed-up commits were all introduced in 5.2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When RX timestamping is enabled and two link-local (non-meta) frames are
received in a row, this constitutes an error.
The tagger is always caching the last link-local frame, in an attempt to
merge it with the meta follow-up frame when that arrives. To recover
from the above error condition, the initial cached link-local frame is
dropped and the second frame in a row is cached (in expectance of the
second meta frame).
However, when dropping the initial link-local frame, its backing memory
was being leaked.
Fixes: f3097be21b ("net: dsa: sja1105: Add a state machine for RX timestamping")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a meta frame is received, it is associated with the cached
sp->data->stampable_skb from the DSA tagger private structure.
Cached means its refcount is incremented with skb_get() in order for
dsa_switch_rcv() to not free it when the tagger .rcv returns NULL.
The mistake is that skb_unref() is not the correct function to use. It
will correctly decrement the refcount (which will go back to zero) but
the skb memory will not be freed. That is the job of kfree_skb(), which
also calls skb_unref().
But it turns out that freeing the cached stampable_skb is in fact not
necessary. It is still a perfectly valid skb, and now it is even
annotated with the partial RX timestamp. So remove the skb_copy()
altogether and simply pass the stampable_skb with a refcount of 1
(incremented by us, decremented by dsa_switch_rcv) up the stack.
Fixes: f3097be21b ("net: dsa: sja1105: Add a state machine for RX timestamping")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IS_ERR_OR_NULL(priv->clock) check inside
sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync
from actually being run.
Additionally, sja1105_ptp_clock_unregister() does not actually get run,
when placed in sja1105_remove(). The DSA switch gets torn down, but the
sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister
needs to be moved to sja1105_teardown, to be symmetrical with
sja1105_ptp_clock_register which is called from the DSA sja1105_setup.
It is strange to fix a "fixes" patch, but the probe failure can only be
seen when the attached PHY does not respond to MDIO (issue which I can't
pinpoint the reason to) and it goes away after I power-cycle the board.
This time the patch was validated on a failing board, and the kernel
panic from the fixed commit's message can no longer be seen.
Fixes: 29dd908d35 ("net: dsa: sja1105: Cancel PTP delayed work on unregister")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like the FDB dump taken from first-generation switches also
contains information on whether entries are static or not. So use that
instead of searching through the driver's tables.
Fixes: d763778224 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When put under a bridge with vlan_filtering 0, the SJA1105 ports will
flood all traffic as if learning was broken. This is because learning
interferes with the rx_vid's configured by dsa_8021q as unique pvid's.
So learning technically still *does* work, it's just that the learnt
entries never get matched due to their unique VLAN ID.
The setting that saves the day is Shared VLAN Learning, which on this
switch family works exactly as desired: VLAN tagging still works
(untagged traffic gets the correct pvid) and FDB entries are still
populated with the correct contents including VID. Also, a frame cannot
violate the forwarding domain restrictions enforced by its classified
VLAN. It is just that the VID is ignored when looking up the FDB for
taking a forwarding decision (selecting the egress port).
This patch activates SVL, and the result is that frames with a learnt
DMAC are no longer flooded in the scenario described above.
Now exactly *because* SVL works as desired, we have to revisit some
earlier patches:
- It is no longer necessary to manipulate the VID of the 'bridge fdb
{add,del}' command when vlan_filtering is off. This is because now,
SVL is enabled for that case, so the actual VID does not matter*.
- It is still desirable to hide dsa_8021q VID's in the FDB dump
callback. But right now the dump callback should no longer hide
duplicates (one per each front panel port's pvid, plus one for the
VLAN that the CPU port is going to tag a TX frame with), because there
shouldn't be any (the switch will match a single FDB entry no matter
its VID anyway).
* Not really... It's no longer necessary to transform a 'bridge fdb add'
into 5 fdb add operations, but the user might still add a fdb entry with
any vid, and all of them would appear as duplicates in 'bridge fdb
show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we
can prune the duplicates at insertion time.
** The VID of 0 is better than 1 because it is always guaranteed to be
in the ports' hardware filter. DSA also avoids putting the VID inside
the netlink response message towards the bridge driver when we return
this particular VID, which makes it suitable for FDB entries learnt
with vlan_filtering off.
Fixes: 227d07a07e ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each iteration of for_each_available_child_of_node() puts the previous
node, but in the case of a return from the middle of the loop, there
is no put, thus causing a memory leak. Hence add an of_node_put() before
the return.
Additionally, the local variable ports in the function
qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(),
which gets a node but does not put it. If the function returns without
putting ports, it may cause a memory leak. Hence put ports before the
mid-loop return statement, and also outside the loop after its last usage
in this function.
Issues found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
action fixes for flow_offload infra compatibility
Fix rcu warnings due to usage of action helpers that expect rcu read lock
protection from rtnl-protected context of flow_offload infra.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao says:
====================
net: hisilicon: Fix a few problems with hip04_eth
During the use of the hip04_eth driver,
several problems were found,
which solved the hip04_tx_reclaim reentry problem,
fixed the problem that hip04_mac_start_xmit never
returns NETDEV_TX_BUSY
and the dma_map_single failed on the arm64 platform.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On the arm64 platform, executing "ifconfig eth0 up" will fail,
returning "ifconfig: SIOCSIFFLAGS: Input/output error."
ndev->dev is not initialized, dma_map_single->get_dma_ops->
dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE
directly, so when we use dma_map_single, the first parameter
is to use the device of platform_device.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TX_DESC_NUM is 256, in tx_count, the maximum value of
mod(TX_DESC_NUM - 1) is 254, the variable "count" in
the hip04_mac_start_xmit function is never equal to
(TX_DESC_NUM - 1), so hip04_mac_start_xmit never
return NETDEV_TX_BUSY.
tx_count is modified to mod(TX_DESC_NUM) so that
the maximum value of tx_count can reach
(TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn
NETDEV_TX_BUSY.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak says:
====================
Fix batched event generation for vlan action
When adding or deleting a batch of entries, the kernel sends up to
TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user
space. However it does not consider that the action sizes may vary and
require different skb sizes.
For example, consider the following script adding 32 entries with all
supported vlan parameters (in order to maximize netlink messages size):
% cat tc-batch.sh
TC="sudo /mnt/iproute2.git/tc/tc"
$TC actions flush action vlan
for i in `seq 1 $1`;
do
cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \
index $i cookie aabbccddeeff112233445566778800a1 "
args=$args$cmd
done
$TC actions add $args
%
% ./tc-batch.sh 32
Error: Failed to fill netlink attributes while adding TC action.
We have an error talking to the kernel
%
patch 1 adds callback in tc_action_ops of vlan action, which calculates
the action size, and passes size to tcf_add_notify()/tcf_del_notify().
patch 2 updates the TDC test suite with relevant vlan test cases.
====================
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Fixes: c7e2b9689 ("sched: introduce vlan action")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Various switch fall through annotations to fixup warnings & errors
resulting from -Wimplicit-fallthrough.
- A fix for systems (at least jazz) using an i8253 PIT as clocksource
when it's not suitably configured.
- Set struct cacheinfo's cpu_map_populated field to true, indicating
that we filled in cache info detected from cop0 registers & avoiding
complaints about that info being (intentionally) missing in
devicetree.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXUnSPBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2u3gD/TaMPczS5027R0FMXskiroUHaMG4S
JL0EYIVmfny4vwYBAIvLr5l1jEXEqegjYXFabuI5PybQlFmTZMhjauh6gKYJ
=e6fl
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 5.3:
- Various switch fall through annotations to fixup warnings & errors
resulting from -Wimplicit-fallthrough.
- A fix for systems (at least jazz) using an i8253 PIT as clocksource
when it's not suitably configured.
- Set struct cacheinfo's cpu_map_populated field to true, indicating
that we filled in cache info detected from cop0 registers &
avoiding complaints about that info being (intentionally) missing
in devicetree"
* tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: BCM63XX: Mark expected switch fall-through
MIPS: OProfile: Mark expected switch fall-throughs
MIPS: Annotate fall-through in Cavium Octeon code
MIPS: Annotate fall-through in kvm/emulate.c
mips: fix cacheinfo
MIPS: kernel: only use i8253 clocksource with periodic clockevent
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Tested-by: Paul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jose Abreu says:
====================
net: stmmac: Fixes for -net
Couple of fixes for -net. More info in commit log.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not try to return a fragment entry from TC list. Otherwise we may not
clean properly allocated entries.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When queues >= 4 we use different registers but we were not subtracting
the offset of 4. Fix this.
Found out by Coverity.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixup the XGMAC selftests by correctly finishing the implementation of
set_filter callback.
Result:
$ ethtool -t enp4s0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters -95
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control 0
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated
which consists most of patches in this pull request. Only most notable
iwlwifi fixes are listed below.
mwifiex
* fix a regression related to WPA1 networks since v5.3-rc1
iwlwifi
* fix use-after-free issues
* fix DMA mapping API usage errors
* fix frame drop occurring due to reorder buffer handling in
RSS in certain conditions
* fix rate scale locking issues
* disable TX A-MSDU on older NICs as it causes problems and was
never supposed to be supported
* new PCI IDs
* GEO_TX_POWER_LIMIT API issue that many people were hitting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdSWJ0AAoJEG4XJFUm622bwb4H/1cbH/VoPkNPfRb6783G3Fuc
SWcI655nMDHY3cElhLPGQrR4OuNYbFpBDT7O73XMIVqnkHlgq3L/VZD2qaacSd4H
tY4HEkkHobil9gdsEt8hpBstp9xNi36klDiq9gEOLT88eatdukCZTsCnBwaTFSEQ
84QxsVsHWuB+khVDay6jprA+vwL6YopOlPwfY9+q0LHWCHq1C98ZqPZoxjb8dzN7
bbW4hWIhMHRtN9ixPwvoRhscev2ZgRPHAncoGFE8bmRM79srZpG0mDeAhQPLGrJz
YSoGtylHpQxg3vzz2y80fMpH6jsUHFeA56xuKPQ5gnUm4bPeFbhx7h29DuABsAw=
=GDUP
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.3
Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated
which consists most of patches in this pull request. Only most notable
iwlwifi fixes are listed below.
mwifiex
* fix a regression related to WPA1 networks since v5.3-rc1
iwlwifi
* fix use-after-free issues
* fix DMA mapping API usage errors
* fix frame drop occurring due to reorder buffer handling in
RSS in certain conditions
* fix rate scale locking issues
* disable TX A-MSDU on older NICs as it causes problems and was
never supposed to be supported
* new PCI IDs
* GEO_TX_POWER_LIMIT API issue that many people were hitting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull HID fixes from Jiri Kosina:
- functional regression fix for some of the Logitech unifying devices,
from Hans de Goede
- race condition fix in hid-sony for bug severely affecting
Valve/Android deployments, from Roderick Colenbrander
- several fixes for issues found by syzbot/kasan, from Oliver Neukum
and Hillf Danton
- functional regression fix for Wacom Cintiq device, from Aaron
Armstrong Skomra
- a few other assorted device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: sony: Fix race condition between rumble and device remove.
HID: hiddev: do cleanup in failure of opening a device
HID: hiddev: avoid opening a disconnected device
HID: input: fix a4tech horizontal wheel custom usage
HID: Add quirk for HP X1200 PIXART OEM mouse
HID: holtek: test for sanity of intfdata
HID: wacom: fix bit shift for Cintiq Companion 2
HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52
HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices
HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT
HID: logitech-dj: add the Powerplay receiver
HID: logitech-hidpp: add USB PID for a few more supported mice
HID: logitech-dj: rename "gaming" receiver to "lightspeed"
be_process_mcc() is invoked in 3 different places and
always with BHs disabled except the be_poll function
but since it's invoked from softirq with BHs
disabled it won't hurt.
v1->v2: added explanation to the patch
v2->v3: add a missing call from be_cmds.c
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A call to 'kfree_skb()' is missing in the error handling path of
'init_one()'.
This is already present in 'remove_one()' but is missing here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sun4i-emac uses the "phy" property to find the PHY it's supposed to
use. This property was deprecated in favor of "phy-handle" in commit
8c5b094476 ("dt-bindings: net: sun4i-emac: Convert the binding to a
schemas").
Add support for this new property name, and fall back to the old one in
case the device tree hasn't been updated.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull pti updates from Thomas Gleixner:
"The performance deterioration departement is not proud at all to
present yet another set of speculation fences to mitigate the next
chapter in the 'what could possibly go wrong' story.
The new vulnerability belongs to the Spectre class and affects GS
based data accesses and has therefore been dubbed 'Grand Schemozzle'
for secret communication purposes. It's officially listed as
CVE-2019-1125.
Conditional branches in the entry paths which contain a SWAPGS
instruction (interrupts and exceptions) can be mis-speculated which
results in speculative accesses with a wrong GS base.
This can happen on entry from user mode through a mis-speculated
branch which takes the entry from kernel mode path and therefore does
not execute the SWAPGS instruction. The following speculative accesses
are done with user GS base.
On entry from kernel mode the mis-speculated branch executes the
SWAPGS instruction in the entry from user mode path which has the same
effect that the following GS based accesses are done with user GS
base.
If there is a disclosure gadget available in these code paths the
mis-speculated data access can be leaked through the usual side
channels.
The entry from user mode issue affects all CPUs which have speculative
execution. The entry from kernel mode issue affects only Intel CPUs
which can speculate through SWAPGS. On CPUs from other vendors SWAPGS
has semantics which prevent that.
SMAP migitates both problems but only when the CPU is not affected by
the Meltdown vulnerability.
The mitigation is to issue LFENCE instructions in the entry from
kernel mode path for all affected CPUs and on the affected Intel CPUs
also in the entry from user mode path unless PTI is enabled because
the CR3 write is serializing.
The fences are as usual enabled conditionally and can be completely
disabled on the kernel command line. The Spectre V1 documentation is
updated accordingly.
A big "Thank You!" goes to Josh for doing the heavy lifting for this
round of hardware misfeature 'repair'. Of course also "Thank You!" to
everybody else who contributed in one way or the other"
* 'x86/grand-schemozzle' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: Add swapgs description to the Spectre v1 documentation
x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS
x86/entry/64: Use JMP instead of JMPQ
x86/speculation: Enable Spectre v1 swapgs mitigations
x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations
We have set the mmc_host.max_seg_size to 8M, but the dma max segment
size of PCI device is set to 64K by default in function pci_device_add().
The mmc_host.max_seg_size is used to set the max segment size of
the blk queue. Then this mismatch will trigger a calltrace like below
when a bigger than 64K segment request arrives at mmc dev. So we should
consider the limitation of the cvm_mmc_host when setting the
mmc_host.max_seg_size.
DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536]
WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350
Modules linked in:
CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62
Hardware name: Marvell OcteonTX CN96XX board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 80c00009 (Nzcv daif +PAN +UAO)
pc : debug_dma_map_sg+0x2b8/0x350
lr : debug_dma_map_sg+0x2b8/0x350
sp : ffff00001770f9e0
x29: ffff00001770f9e0 x28: ffffffff00000000
x27: 00000000ffffffff x26: ffff800bc2c73180
x25: ffff000010e83700 x24: 0000000000000002
x23: 0000000000000001 x22: 0000000000000001
x21: 0000000000000000 x20: ffff800bc48ba0b0
x19: ffff800bc97e8c00 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000010e835c8 x14: 6874207265676e6f
x13: 6c20746e656d6765 x12: 7320677320676e69
x11: 7070616d203a342e x10: 31303a31303a3030
x9 : 303020636d6d5f78 x8 : 35363d78616d5b20
x7 : 00000000000002fd x6 : ffff000010fd57dc
x5 : 0000000000000000 x4 : ffff0000106c61f0
x3 : 00000000ffffffff x2 : 0000800bee060000
x1 : 7010678df3041a00 x0 : 0000000000000000
Call trace:
debug_dma_map_sg+0x2b8/0x350
cvm_mmc_request+0x3c4/0x988
__mmc_start_request+0x9c/0x1f8
mmc_start_request+0x7c/0xb0
mmc_blk_mq_issue_rq+0x5c4/0x7b8
mmc_mq_queue_rq+0x11c/0x278
blk_mq_dispatch_rq_list+0xb0/0x568
blk_mq_do_dispatch_sched+0x6c/0x108
blk_mq_sched_dispatch_requests+0x110/0x1b8
__blk_mq_run_hw_queue+0xb0/0x118
blk_mq_run_work_fn+0x28/0x38
process_one_work+0x210/0x490
worker_thread+0x48/0x458
kthread+0x130/0x138
ret_from_fork+0x10/0x1c
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Fixes: ba3869ff32 ("mmc: cavium: Add core MMC driver for Cavium SOCs")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SD host controller specification defines 3 types software reset:
software reset for data line, software reset for command line and software
reset for all. Software reset for all means this reset affects the entire
Host controller except for the card detection circuit.
In sdhci_runtime_resume_host() we always do a software "reset for all",
which causes the Spreadtrum variant controller to work abnormally after
resuming. To fix the problem, let's do a software reset for the data and
the command part, rather than "for all".
However, as sdhci_runtime_resume() is a common sdhci function and we don't
want to change the behaviour for other variants, let's introduce a new
in-parameter for it. This enables the caller to decide if a "reset for all"
shall be done or not.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Fixes: fb8bd90f83 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The endpoint type should also be checked before a device
is accepted.
Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct touchpad_protocol {
...
struct tp_finger fingers[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*tp) + tp->number_of_fingers * sizeof(tp->fingers[0]);
with:
struct_size(tp, fingers, tp->number_of_fingers)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When removing a device from an iommu group, the domain should
be detached from the device. Otherwise, the stale domain info
will still be cached by the driver and the driver will refuse
to attach any domain to the device again.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Fixes: b7297783c2 ("iommu/vt-d: Remove duplicated code for device hotplug")
Reported-and-tested-by: Vlad Buslov <vladbu@mellanox.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lkml.org/lkml/2019/7/26/1133
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warning shows up:
../drivers/iommu/arm-smmu-v3.c: In function ‘arm_smmu_write_strtab_ent’:
../drivers/iommu/arm-smmu-v3.c:1189:7: warning: this statement may fall
through [-Wimplicit-fallthrough=]
if (disable_bypass)
^
../drivers/iommu/arm-smmu-v3.c:1191:3: note: here
default:
^~~~~~~
Rework so that the compiler doesn't warn about fall-through. Make it
clearer by calling 'BUG_ON()' when disable_bypass is set, and always
'break;'
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
MSI pages must always be mapped into a device's *current* domain, which
*might* be the default DMA domain, but might instead be a VFIO domain
with its own MSI cookie. This subtlety got accidentally lost in the
streamlining of __iommu_dma_map(), but rather than reintroduce more
complexity and/or special-casing, it turns out neater to just split this
path out entirely.
Since iommu_dma_get_msi_page() already duplicates much of what
__iommu_dma_map() does, it can easily just make the allocation and
mapping calls directly as well. That way we can further streamline the
helper back to exclusively operating on DMA domains.
Fixes: b61d271e59 ("iommu/dma: Move domain lookup into __iommu_dma_{map,unmap}")
Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit bfcba288b9 ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object. This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.
Fix the bug by setting the PCM hw info flag locally.
Fixes: bfcba288b9 ("ALSA - hda: Add support for link audio time reporting")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Perf relies on _etext and _stext symbols being one of 't', 'T', 'v' or
'V'. Put them into .text section to guarantee that.
Also moves padding to page boundary inside .text which has an effect that
.text section is now padded with nops rather than 0's, which apparently
has been the initial intention for specifying 0x0700 fill expression.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cleanup labels in head64 some of which are not being used since git
recorded history.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove pointless stack recursion on stack type ... warning, which
only confuses people. There is no way to make backchain unwinder 100%
reliable. When a task is interrupted in-between stack frame allocation
and backchain write instructions new stack frame backchain pointer is
left uninitialized (there are also sometimes additional instruction
in-between stack frame allocation and backchain write instructions due
to gcc shrink-wrapping). In attempt to unwind such stack the unwinder
would still try to use that invalid backchain value and perform all kind
of sanity checks on it to make sure we are not pointed out of stack. In
some cases that invalid backchain value would be 0 and we would falsely
treat next stackframe as pt_regs and again gprs[15] in those pt_regs
might happen to point at some address within the task's stack.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
After some investigation it doesn't look like init_mm fields
start_code/end_code are used anywhere besides potentially in dump_mm for
debugging purposes. Originally the value of 0 for start_code reflected
the presence of lowcore and early boot code. But with kaslr in place
start_code/end_code range should not span over unoccupied by the code
segment memory. So, adjust init_mm start_code to point at the beginning
of the code segment like other architectures do it.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit d1874a0c28 ("s390/mm: make the pxd_offset functions more
robust") behaviour of p4d_offset, pud_offset and pmd_offset has been
changed so that they cannot be used to iterate through top level page
table, because the index for the top level page table is now calculated
in pgd_offset. To avoid dumping the very first region/segment top level
table entry 2048 times simply iterate entry pointer like it is already
done in other page walking cases.
Fixes: d1874a0c28 ("s390/mm: make the pxd_offset functions more robust")
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This reverts commit db9492cef4 ("s390/protvirt: add memory sharing for
diag 308 set/store") which due to ultravisor implementation change is
not needed after all.
Fixes: db9492cef4 ("s390/protvirt: add memory sharing for diag 308 set/store")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When a process creates a new trigger by writing into /proc/pressure/*
files, permissions to write such a file should be used to determine whether
the process is allowed to do so or not. Current implementation would also
require such a process to have setsched capability. Setting of psi trigger
thread's scheduling policy is an implementation detail and should not be
exposed to the user level. Remove the permission check by using _nocheck
version of the function.
Suggested-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: lizefan@huawei.com
Cc: mingo@redhat.com
Cc: akpm@linux-foundation.org
Cc: kernel-team@android.com
Cc: dennisszhou@gmail.com
Cc: dennis@kernel.org
Cc: hannes@cmpxchg.org
Cc: axboe@kernel.dk
Link: https://lkml.kernel.org/r/20190730013310.162367-1-surenb@google.com
Wenwen Wang