Commit Graph

272 Commits

Author SHA1 Message Date
Ilya Dryomov a319bf56a6 libceph: store timeouts in jiffies, verify user input
There are currently three libceph-level timeouts that the user can
specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive.  All of
these are in seconds and no checking is done on user input: negative
values are accepted, we multiply them all by HZ which may or may not
overflow, arbitrarily large jiffies then get added together, etc.

There is also a bug in the way mount_timeout=0 is handled.  It's
supposed to mean "infinite timeout", but that's not how wait.h APIs
treat it and so __ceph_open_session() for example will busy loop
without much chance of being interrupted if none of ceph-mons are
there.

Fix all this by verifying user input, storing timeouts capped by
msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies()
helper for all user-specified waits to handle infinite timeouts
correctly.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 11:49:29 +03:00
Yan, Zheng 144cba1493 libceph: allow setting osd_req_op's flags
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 11:49:27 +03:00
Yan, Zheng 66ba609f7b libceph: properly release STAT request's raw_data_in
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-06-25 11:49:27 +03:00
Ilya Dryomov 521a04d06a Revert "libceph: clear r_req_lru_item in __unregister_linger_request()"
This reverts commit ba9d114ec5.

.. which introduced a regression that prevented all lingering requests
requeued in kick_requests() from ever being sent to the OSDs, resulting
in a lot of missed notifies.  In retrospect it's pretty obvious that
r_req_lru_item item in the case of lingering requests can be used not
only for notarget, but also for unsent linkage due to how tightly
actual map and enqueue operations are coupled in __map_request().

The assertion that was being silenced is taken care of in the previous
("libceph: request a new osdmap if lingering request maps to no osd")
commit: by always kicking homeless lingering requests we ensure that
none of them ends up on the notarget list outside of the critical
section guarded by request_mutex.

Cc: stable@vger.kernel.org # 3.18+, needs b049453221 "libceph: request a new osdmap if lingering request maps to no osd"
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2015-05-20 21:02:46 +03:00
Ilya Dryomov b049453221 libceph: request a new osdmap if lingering request maps to no osd
This commit does two things.  First, if there are any homeless
lingering requests, we now request a new osdmap even if the osdmap that
is being processed brought no changes, i.e. if a given lingering
request turned homeless in one of the previous epochs and remained
homeless in the current epoch.  Not doing so leaves us with a stale
osdmap and as a result we may miss our window for reestablishing the
watch and lose notifies.

MON=1 OSD=1:

    # cat linger-needmap.sh
    #!/bin/bash
    rbd create --size 1 test
    DEV=$(rbd map test)
    ceph osd out 0
    rbd map dne/dne # obtain a new osdmap as a side effect (!)
    sleep 1
    ceph osd in 0
    rbd resize --size 2 test
    # rbd info test | grep size -> 2M
    # blockdev --getsize $DEV -> 1M

N.B.: Not obtaining a new osdmap in between "osd out" and "osd in"
above is enough to make it miss that resize notify, but that is a
bug^Wlimitation of ceph watch/notify v1.

Second, homeless lingering requests are now kicked just like those
lingering requests whose mapping has changed.  This is mainly to
recognize that a homeless lingering request makes no sense and to
preserve the invariant that a registered lingering request is not
sitting on any of r_req_lru_item lists.  This spares us a WARN_ON,
which commit ba9d114ec5 ("libceph: clear r_req_lru_item in
__unregister_linger_request()") tried to fix the _wrong_ way.

Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2015-05-20 21:02:14 +03:00
Ilya Dryomov b28ec2f37e libceph: kfree() in put_osd() shouldn't depend on authorizer
a255651d4c ("ceph: ensure auth ops are defined before use") made
kfree() in put_osd() conditional on the authorizer.  A mechanical
mistake most likely - fix it.

Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19 14:27:51 +03:00
Ilya Dryomov 7eb71e0351 libceph: fix double __remove_osd() problem
It turns out it's possible to get __remove_osd() called twice on the
same OSD.  That doesn't sit well with rb_erase() - depending on the
shape of the tree we can get a NULL dereference, a soft lockup or
a random crash at some point in the future as we end up touching freed
memory.  One scenario that I was able to reproduce is as follows:

            <osd3 is idle, on the osd lru list>
<con reset - osd3>
con_fault_finish()
  osd_reset()
                              <osdmap - osd3 down>
                              ceph_osdc_handle_map()
                                <takes map_sem>
                                kick_requests()
                                  <takes request_mutex>
                                  reset_changed_osds()
                                    __reset_osd()
                                      __remove_osd()
                                  <releases request_mutex>
                                <releases map_sem>
    <takes map_sem>
    <takes request_mutex>
    __kick_osd_requests()
      __reset_osd()
        __remove_osd() <-- !!!

A case can be made that osd refcounting is imperfect and reworking it
would be a proper resolution, but for now Sage and I decided to fix
this by adding a safe guard around __remove_osd().

Fixes: http://tracker.ceph.com/issues/8087

Cc: Sage Weil <sage@redhat.com>
Cc: stable@vger.kernel.org # 3.9+: 7c6e6fc53e73: libceph: assert both regular and lingering lists in __remove_osd()
Cc: stable@vger.kernel.org # 3.9+: cc9f1f518cec: libceph: change from BUG to WARN for __remove_osd() asserts
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-02-19 14:27:50 +03:00
Yan, Zheng 715e4cd405 libceph: specify position of extent operation
allow specifying position of extent operation in multi-operations
osd request. This is required for cephfs to convert inline data to
normal data (compare xattr, then write object).

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-12-17 20:09:52 +03:00
Yan, Zheng 864e9197f1 libceph: add CREATE osd operation support
Add CEPH_OSD_OP_CREATE support.  Also change libceph to not treat
CEPH_OSD_OP_DELETE as an extent op and add an assert to that end.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-12-17 20:09:51 +03:00
Yan, Zheng d74b50bed0 libceph: add SETXATTR/CMPXATTR osd operations support
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-12-17 20:09:51 +03:00
Yan, Zheng 33d0733796 libceph: message signature support
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-17 20:09:50 +03:00
Ilya Dryomov cc9f1f518c libceph: change from BUG to WARN for __remove_osd() asserts
No reason to use BUG_ON for osd request list assertions.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:26:34 +03:00
Ilya Dryomov ba9d114ec5 libceph: clear r_req_lru_item in __unregister_linger_request()
kick_requests() can put linger requests on the notarget list.  This
means we need to clear the much-overloaded req->r_req_lru_item in
__unregister_linger_request() as well, or we get an assertion failure
in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item).

AFAICT the assumption was that registered linger requests cannot be on
any of req->r_req_lru_item lists, but that's clearly not the case.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:21:14 +03:00
Ilya Dryomov a390de0208 libceph: unlink from o_linger_requests when clearing r_osd
Requests have to be unlinked from both osd->o_requests (normal
requests) and osd->o_linger_requests (linger requests) lists when
clearing req->r_osd.  Otherwise __unregister_linger_request() gets
confused and we trip over a !list_empty(&osd->o_linger_requests)
assert in __remove_osd().

MON=1 OSD=1:

    # cat remove-osd.sh
    #!/bin/bash
    rbd create --size 1 test
    DEV=$(rbd map test)
    ceph osd out 0
    sleep 3
    rbd map dne/dne # obtain a new osdmap as a side effect
    rbd unmap $DEV & # will block
    sleep 3
    ceph osd in 0

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13 22:21:13 +03:00
Ilya Dryomov 70b5bfa360 libceph: sync osd op definitions in rados.h
Bring in missing osd ops and strings, use macros to eliminate multiple
points of maintenance.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:02 -07:00
Ilya Dryomov 91883cd27c libceph: don't try checking queue_work() return value
queue_work() doesn't "fail to queue", it returns false if work was
already on a queue, which can't happen here since we allocate
event_work right before we queue it.  So don't bother at all.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:25 +04:00
Joe Perches b9a678994b libceph: Convert pr_warning to pr_warn
Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14 21:03:23 +04:00
Ilya Dryomov 2cc6128ab2 libceph: resend lingering requests with a new tid
Both not yet registered (r_linger && list_empty(&r_linger_item)) and
registered linger requests should use the new tid on resend to avoid
the dup op detection logic on the OSDs, yet we were doing this only for
"registered" case.  Factor out and simplify the "registered" logic and
use the new helper for "not registered" case as well.

Fixes: http://tracker.ceph.com/issues/8806

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:19 +04:00
Ilya Dryomov f671b581f1 libceph: abstract out ceph_osd_request enqueue logic
Introduce __enqueue_request() and switch to it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14 21:03:18 +04:00
Ilya Dryomov 2d05f082cb libceph: nuke ceph_osdc_unregister_linger_request()
Remove now unused ceph_osdc_unregister_linger_request().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:45 +04:00
Ilya Dryomov c9f9b93ddf libceph: introduce ceph_osdc_cancel_request()
Introduce ceph_osdc_cancel_request() intended for canceling requests
from the higher layers (rbd and cephfs).  Because higher layers are in
charge and are supposed to know what and when they are canceling, the
request is not completed, only unref'ed and removed from the libceph
data structures.

__cancel_request() is no longer called before __unregister_request(),
because __unregister_request() unconditionally revokes r_request and
there is no point in trying to do it twice.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:44 +04:00
Ilya Dryomov 4f23409e0c libceph: fix linger request check in __unregister_request()
We should check if request is on the linger request list of any of the
OSDs, not whether request is registered or not.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:44 +04:00
Ilya Dryomov af59306455 libceph: unregister only registered linger requests
Linger requests that have not yet been registered should not be
unregistered by __unregister_linger_request().  This messes up ref
count and leads to use-after-free.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:44 +04:00
Ilya Dryomov 7c6e6fc53e libceph: assert both regular and lingering lists in __remove_osd()
It is important that both regular and lingering requests lists are
empty when the OSD is removed.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:43 +04:00
Ilya Dryomov 6562d661d2 libceph: harden ceph_osdc_request_release() a bit
Add some WARN_ONs to alert us when we try to destroy requests that are
still registered.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:43 +04:00
Ilya Dryomov 9e94af202a libceph: move and add dout()s to ceph_osdc_request_{get,put}()
Add dout()s to ceph_osdc_request_{get,put}().  Also move them to .c and
turn kref release callback into a static function.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:43 +04:00
Ilya Dryomov bbf37ec3a6 libceph: add maybe_move_osd_to_lru() and switch to it
Abstract out __move_osd_to_lru() logic from __unregister_request() and
__unregister_linger_request().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:43 +04:00
Ilya Dryomov 1d0326b13b libceph: rename ceph_osd_request::r_linger_osd to r_linger_osd_item
So that:

req->r_osd_item --> osd->o_requests list
req->r_linger_osd_item --> osd->o_linger_requests list

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08 15:08:42 +04:00
stephen hemminger f647944995 ceph: remove bogus extern
Sparse complained about this bogus extern on definition of
a function.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11 15:39:19 -07:00
Linus Torvalds 240cd6a817 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "The biggest chunk is a series of patches from Ilya that add support
  for new Ceph osd and crush map features, including some new tunables,
  primary affinity, and the new encoding that is needed for erasure
  coding support.  This brings things into parity with the server side
  and the looming firefly release.  There is also support for allocation
  hints in RBD that help limit fragmentation on the server side.

  There is also a series of patches from Zheng fixing NFS reexport,
  directory fragmentation support, flock vs fnctl behavior, and some
  issues with clustered MDS.

  Finally, there are some miscellaneous fixes from Yunchuan Wen for
  fscache, Fabian Frederick for ACLs, and from me for fsync(dirfd)
  behavior"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (79 commits)
  ceph: skip invalid dentry during dcache readdir
  libceph: dump pool {read,write}_tier to debugfs
  libceph: output primary affinity values on osdmap updates
  ceph: flush cap release queue when trimming session caps
  ceph: don't grabs open file reference for aborted request
  ceph: drop extra open file reference in ceph_atomic_open()
  ceph: preallocate buffer for readdir reply
  libceph: enable PRIMARY_AFFINITY feature bit
  libceph: redo ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
  libceph: add support for osd primary affinity
  libceph: add support for primary_temp mappings
  libceph: return primary from ceph_calc_pg_acting()
  libceph: switch ceph_calc_pg_acting() to new helpers
  libceph: introduce apply_temps() helper
  libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpers
  libceph: ceph_can_shift_osds(pool) and pool type defines
  libceph: ceph_osd_{exists,is_up,is_down}(osd) definitions
  libceph: enable OSDMAP_ENC feature bit
  libceph: primary_affinity decode bits
  libceph: primary_affinity infrastructure
  ...
2014-04-07 11:09:13 -07:00
Ilya Dryomov 8008ab1080 libceph: return primary from ceph_calc_pg_acting()
In preparation for adding support for primary_temp, stop assuming
primaryness: add a primary out parameter to ceph_calc_pg_acting() and
change call sites accordingly.  Primary is now specified separately
from the order of osds in the set.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:14 -07:00
Ilya Dryomov a2505d63ee libceph: split osdmap allocation and decode steps
Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:37 -07:00
Ilya Dryomov c647b8a8c6 libceph: add support for CEPH_OSD_OP_SETALLOCHINT osd op
This is primarily for rbd's benefit and is supposed to combat
fragmentation:

"... knowing that rbd images have a 4m size, librbd can pass a hint
that will let the osd do the xfs allocation size ioctl on new files so
that they are allocated in 1m or 4m chunks.  We've seen cases where
users with rbd workloads have very high levels of fragmentation in xfs
and this would mitigate that and probably have a pretty nice
performance benefit."

SETALLOCHINT is considered advisory, so our backwards compatibility
mechanism here is to set FAILOK flag for all SETALLOCHINT ops.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:51 +08:00
Ilya Dryomov 7b25bf5f02 libceph: encode CEPH_OSD_OP_FLAG_* op flags
Encode ceph_osd_op::flags field so that it gets sent over the wire.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-03 10:33:51 +08:00
stephen hemminger 2045ceaed4 net: remove unnecessary return's
One of my pet coding style peeves is the practice of
adding extra return; at the end of function.
Kill several instances of this in network code.

I suppose some coccinelle wizardy could do this automatically.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13 18:33:38 -05:00
Ilya Dryomov ff513ace9b libceph: take map_sem for read in handle_reply()
Handling redirect replies requires both map_sem and request_mutex.
Taking map_sem unconditionally near the top of handle_reply() avoids
possible race conditions that arise from releasing request_mutex to be
able to acquire map_sem in redirect reply case.  (Lock ordering is:
map_sem, request_mutex, crush_mutex.)

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:53 -08:00
Ilya Dryomov 0bbfdfe8d2 libceph: factor out logic from ceph_osdc_start_request()
Factor out logic from ceph_osdc_start_request() into a new helper,
__ceph_osdc_start_request().  ceph_osdc_start_request() now amounts to
taking locks and calling __ceph_osdc_start_request().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-07 10:45:42 -08:00
Ilya Dryomov c172ec5c8d libceph: fix error handling in ceph_osdc_init()
msgpool_op_reply message pool isn't destroyed if workqueue construction
fails.  Fix it.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-02-03 19:20:59 +02:00
Ilya Dryomov 205ee1187a libceph: follow redirect replies from osds
Follow redirect replies from osds, for details see ceph.git commit
fbbe3ad1220799b7bb00ea30fce581c5eadaf034.

v1 (current) version of redirect reply consists of oloc and oid, which
expands to pool, key, nspace, hash and oid.  However, server-side code
that would populate anything other than pool doesn't exist yet, and
hence this commit adds support for pool redirects only.  To make sure
that future server-side updates don't break us, we decode all fields
and, if any of key, nspace, hash or oid have a non-default value, error
out with "corrupt osd_op_reply ..." message.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:53 +02:00
Ilya Dryomov 3c972c95c6 libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}
Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:49 +02:00
Ilya Dryomov 17a13e4028 libceph: follow {read,write}_tier fields on osd request submission
Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and
write_tier for write and read+write ops (aka basic tiering support).
{read,write}_tier are part of pg_pool_t since v9.  This commit bumps
our pg_pool_t decode compat version from v7 to v9, all new fields
except for {read,write}_tier are ignored.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:45 +02:00
Ilya Dryomov 7c13cb6435 libceph: replace ceph_calc_ceph_pg() with ceph_oloc_oid_to_pg()
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:32 +02:00
Ilya Dryomov 4295f2217a libceph: introduce and start using oid abstraction
In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:28 +02:00
Ilya Dryomov 2d0ebc5d59 libceph: rename MAX_OBJ_NAME_SIZE to CEPH_MAX_OID_NAME_LEN
In preparation for adding oid abstraction, rename MAX_OBJ_NAME_SIZE to
CEPH_MAX_OID_NAME_LEN.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:24 +02:00
Ilya Dryomov 22116525ba libceph: start using oloc abstraction
Instead of relying on pool fields in ceph_file_layout (for mapping) and
ceph_pg (for enconding), start using ceph_object_locator (oloc)
abstraction.  Note that userspace oloc currently consists of pool, key,
nspace and hash fields, while this one contains only a pool.  This is
OK, because at this point we only send (i.e. encode) olocs and never
have to receive (i.e. decode) them.

This makes keeping a copy of ceph_file_layout in every osd request
unnecessary, so ceph_osd_request::r_file_layout field is nuked.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:03 +02:00
Ilya Dryomov 0b4af2e8c9 libceph: dout() is missing a newline
Add a missing newline to a dout() in __reset_osd().

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-01-26 12:35:54 +02:00
Ilya Dryomov f2be82b005 libceph: fix preallocation check in get_reply()
The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer.  Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to

[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)

and, through another bug, leads to forever hung tasks and forced
reboots.  Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.

Fixes: http://tracker.ceph.com/issues/5425

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14 11:27:47 +02:00
Ilya Dryomov 3f0a4ac55f libceph: rename front to front_len in get_reply()
Rename front local variable to front_len in get_reply() to make its
purpose more clear.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-14 11:27:42 +02:00
Josh Durgin 9a1ea2dbff libceph: resend all writes after the osdmap loses the full flag
With the current full handling, there is a race between osds and
clients getting the first map marked full. If the osd wins, it will
return -ENOSPC to any writes, but the client may already have writes
in flight. This results in the client getting the error and
propagating it up the stack. For rbd, the block layer turns this into
EIO, which can cause corruption in filesystems above it.

To avoid this race, osds are being changed to drop writes that came
from clients with an osdmap older than the last osdmap marked full.
In order for this to work, clients must resend all writes after they
encounter a full -> not full transition in the osdmap. osds will wait
for an updated map instead of processing a request from a client with
a newer map, so resent writes will not be dropped by the osd unless
there is another not full -> full transition.

This approach requires both osds and clients to be fixed to avoid the
race. Old clients talking to osds with this fix may hang instead of
returning EIO and potentially corrupting an fs. New clients talking to
old osds have the same behavior as before if they encounter this race.

Fixes: http://tracker.ceph.com/issues/6938

Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 23:04:28 +02:00
Josh Durgin d29adb34a9 libceph: block I/O when PAUSE or FULL osd map flags are set
The PAUSEWR and PAUSERD flags are meant to stop the cluster from
processing writes and reads, respectively. The FULL flag is set when
the cluster determines that it is out of space, and will no longer
process writes.  PAUSEWR and PAUSERD are purely client-side settings
already implemented in userspace clients. The osd does nothing special
with these flags.

When the FULL flag is set, however, the osd responds to all writes
with -ENOSPC. For cephfs, this makes sense, but for rbd the block
layer translates this into EIO.  If a cluster goes from full to
non-full quickly, a filesystem on top of rbd will not behave well,
since some writes succeed while others get EIO.

Fix this by blocking any writes when the FULL flag is set in the osd
client. This is the same strategy used by userspace, so apply it by
default.  A follow-on patch makes this configurable.

__map_request() is called to re-target osd requests in case the
available osds changed.  Add a paused field to a ceph_osd_request, and
set it whenever an appropriate osd map flag is set.  Avoid queueing
paused requests in __map_request(), but force them to be resent if
they become unpaused.

Also subscribe to the next osd map from the monitor if any of these
flags are set, so paused requests can be unblocked as soon as
possible.

Fixes: http://tracker.ceph.com/issues/6079

Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 09:13:29 -08:00
Li Wang 37c89bde5d ceph: Add necessary clean up if invalid reply received in handle_reply()
Wake up possible waiters, invoke the call back if any, unregister the request

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2013-12-13 09:13:29 -08:00
Josh Durgin dd935f44a4 libceph: add function to ensure notifies are complete
Without a way to flush the osd client's notify workqueue, a watch
event that is unregistered could continue receiving callbacks
indefinitely.

Unregistering the event simply means no new notifies are added to the
queue, but there may still be events in the queue that will call the
watch callback for the event. If the queue is flushed after the event
is unregistered, the caller can be sure no more watch callbacks will
occur for the canceled watch.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2013-09-09 11:15:49 -07:00
Dan Carpenter dbcae088fa libceph: create_singlethread_workqueue() doesn't return ERR_PTRs
create_singlethread_workqueue() returns NULL on error, and it doesn't
return ERR_PTRs.

I tweaked the error handling a little to be consistent with earlier in
the function.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:31 -07:00
Dan Carpenter b72e19b922 libceph: potential NULL dereference in ceph_osdc_handle_map()
There are two places where we read "nr_maps" if both of them are set to
zero then we would hit a NULL dereference here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:30 -07:00
Dan Carpenter 1874119664 libceph: fix error handling in handle_reply()
We've tried to fix the error paths in this function before, but there
is still a hidden goto in the ceph_decode_need() macro which goes to the
wrong place.  We need to release the "req" and unlock a mutex before
returning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-27 12:26:30 -07:00
Li Wang ad7a60de88 ceph: punch hole support
This patch implements fallocate and punch hole support for Ceph kernel client.

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:12:17 -07:00
majianpeng 73d9f7eef3 libceph: unregister request in __map_request failed and nofail == false
For nofail == false request, if __map_request failed, the caller does
cleanup work, like releasing the relative pages.  It doesn't make any sense
to retry this request.

CC: stable@vger.kernel.org
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-09 17:52:06 -07:00
Yan, Zheng 61c5d6bf70 libceph: call r_unsafe_callback when unsafe reply is received
We can't use !req->r_sent to check if OSD request is sent for the
first time, this is because __cancel_request() zeros req->r_sent
when OSD map changes. Rather than adding a new variable to struct
ceph_osd_request to indicate if it's sent for the first time, We
can call the unsafe callback only when unsafe OSD reply is received.
If OSD's first reply is safe, just skip calling the unsafe callback.

The purpose of unsafe callback is adding unsafe request to a list,
so that fsync(2) can wait for the safe reply. fsync(2) doesn't need
to wait for a write(2) that hasn't returned yet. So it's OK to add
request to the unsafe list when the first OSD reply is received.
(ceph_sync_write() returns after receiving the first OSD reply)

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:58 -07:00
Yan, Zheng ccca4e37b1 libceph: fix truncate size calculation
check the "not truncated yet" case

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:45 -07:00
Yan, Zheng eb845ff13a libceph: fix safe completion
handle_reply() calls complete_request() only if the first OSD reply
has ONDISK flag.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-07-03 15:32:44 -07:00
Alex Elder 4974341eb9 libceph: print more info for short message header
If an osd client response message arrives that has a front section
that's too big for the buffer set aside to receive it, a warning
gets reported and a new buffer is allocated.

The warning says nothing about which connection had the problem.
Add the peer type and number to what gets reported, to be a bit more
informative.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-07-03 15:32:40 -07:00
Alex Elder 96e4dac66f libceph: add lingering request reference when registered
When an osd request is set to linger, the osd client holds onto the
request so it can be re-submitted following certain osd map changes.
The osd client holds a reference to the request until it is
unregistered.  This is used by rbd for watch requests.

Currently, the reference is taken when the request is marked with
the linger flag.  This means that if an error occurs after that
time but before the the request completes successfully, that
reference is leaked.

There's really no reason to take the reference until the request is
registered in the the osd client's list of lingering requests, and
that only happens when the lingering (watch) request completes
successfully.

So take that reference only when it gets registered following
succesful completion, and drop it (as before) when the request
gets unregistered.  This avoids the reference problem on error
in rbd.

Rearrange ceph_osdc_unregister_linger_request() to avoid using
the request pointer after it may have been freed.

And hold an extra reference in kick_requests() while handling
a linger request that has not yet been registered, to ensure
it doesn't go away.

This resolves:
    http://tracker.ceph.com/issues/3859

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-07-03 15:32:37 -07:00
Alex Elder 14d2f38df6 libceph: must hold mutex for reset_changed_osds()
An osd client has a red-black tree describing its osds, and
occasionally we would get crashes due to one of these trees tree
becoming corrupt somehow.

The problem turned out to be that reset_changed_osds() was being
called without protection of the osd client request mutex.  That
function would call __reset_osd() for any osd that had changed, and
__reset_osd() would call __remove_osd() for any osd with no
outstanding requests, and finally __remove_osd() would remove the
corresponding entry from the red-black tree.  Thus, the tree was
getting modified without having any lock protection, and was
vulnerable to problems due to concurrent updates.

This appears to be the only osd tree updating path that has this
problem.  It can be fairly easily fixed by moving the call up
a few lines, to just before the request mutex gets dropped
in kick_requests().

This resolves:
    http://tracker.ceph.com/issues/5043

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-17 12:45:40 -05:00
Alex Elder c10ebbf55b libceph: init sent and completed when starting
The rbd code has a need to be able to restart an osd request that
has already been started and completed once before.  This currently
wouldn't work right because the osd client code assumes an osd
request will be started exactly once  Certain fields in a request
are never cleared and this leads to trouble if you try to reuse it.

Specifically, the r_sent, r_got_reply, and r_completed fields are
never cleared.  The r_sent field records the osd incarnation at the
time the request was sent to that osd.  If that's non-zero, the
message won't get re-mapped to a target osd properly, and won't be
put on the unsafe requests list the first time it's sent as it
should.  The r_got_reply field is used in handle_reply() to ensure
the reply to a request is processed only once.  And the r_completed
field is used for lingering requests to avoid calling the callback
function every time the osd client re-sends the request on behalf of
its initiator.

Each osd request passes through ceph_osdc_start_request() when
responsibility for the request is handed over to the osd client for
completion.  We can safely zero these three fields there each time a
request gets started.

One last related change--clear the r_linger flag when a request
is no longer registered as a linger request.

This resolves:
    http://tracker.ceph.com/issues/5026

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-13 12:52:23 -05:00
Alex Elder 5522ae0b68 libceph: use slab cache for osd client requests
Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:41 -05:00
Alex Elder 9ef1ee5a1b libceph: fix byte order mismatch
A WATCH op includes an object version.  The version that's supplied
is incorrectly byte-swapped osd_req_op_watch_init() where it's first
assigned (it's been this way since that code was first added).

The result is that the version sent to the osd is wrong, because
that value gets byte-swapped again in osd_req_encode_op().  This
is the source of a sparse warning related to improper byte order in
the assignment.

The approach of using the version to avoid a race is deprecated
(see http://tracker.ceph.com/issues/3871), and the watch parameter
is no longer even examined by the osd.  So fix the assignment in
osd_req_op_watch_init() so it no longer does the byte swap.

This resolves:
    http://tracker.ceph.com/issues/3847

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:24 -07:00
Alex Elder 6c57b5545d libceph: support pages for class request data
Add the ability to provide an array of pages as outbound request
data for object class method calls.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:06 -07:00
Alex Elder 49719778bf libceph: support raw data requests
Allow osd request ops that aren't otherwise structured (not class,
extent, or watch ops) to specify "raw" data to be used to hold
incoming data for the op.  Make use of this capability for the osd
STAT op.

Prefix the name of the private function osd_req_op_init() with "_",
and expose a new function by that (earlier) name whose purpose is to
initialize osd ops with (only) implied data.

For now we'll just support the use of a page array for an osd op
with incoming raw data.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:00 -07:00
Alex Elder 863c7eb590 libceph: clean up osd data field access functions
There are a bunch of functions defined to encapsulate getting the
address of a data field for a particular op in an osd request.
They're all defined the same way, so create a macro to take the
place of all of them.

Two of these are used outside the osd client code, so preserve them
(but convert them to use the new macro internally).  Stop exporting
the ones that aren't used elsewhere.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:59 -07:00
Alex Elder 406e2c9f92 libceph: kill off osd data write_request parameters
In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:58 -07:00
Alex Elder 26be88087a libceph: change how "safe" callback is used
An osd request currently has two callbacks.  They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.

The only time the second callback is used is in the ceph file system
for a synchronous write.  There's a race that makes some handling of
this case unsafe.  This patch addresses this problem.  The error
handling for this callback is also kind of gross, and this patch
changes that as well.

In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list.  Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns.  The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.

To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*.  So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe).  The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time.  That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.

We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe.  This
will avoid the race because this call will be made under protection
of the osd client's request mutex.  It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.

The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose.  It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.

This resolves the original problem reportedin:
    http://tracker.ceph.com/issues/4706

Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:18:52 -07:00
Alex Elder 04017e29bb libceph: make method call data be a separate data item
Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd.  Instead, encode the
data in a data item separate from the class and method names.

This will allow large amounts of data to be supplied to methods
without copying.  Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list.  But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.

This resolves:
    http://tracker.ceph.com/issues/4104

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:35 -07:00
Alex Elder 90af36022a libceph: add, don't set data for a message
Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:34 -07:00
Alex Elder 5476492fba libceph: kill off osd request r_data_in and r_data_out
Finally!  Convert the osd op data pointers into real structures, and
make the switch over to using them instead of having all ops share
the in and/or out data structures in the osd request.

Set up a new function to traverse the set of ops and release any
data associated with them (pages).

This and the patches leading up to it resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:25 -07:00
Alex Elder ec9123c567 libceph: set the data pointers when encoding ops
Still using the osd request r_data_in and r_data_out pointer, but
we're basically only referring to it via the data pointers in the
osd ops.  And we're transferring that information to the request
or reply message only when the op indicates it's needed, in
osd_req_encode_op().

To avoid a forward reference, ceph_osdc_msg_data_set() was moved up
in the file.

Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(),
because the ops array will already be zeroed anyway.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:24 -07:00
Alex Elder a4ce40a9a7 libceph: combine initializing and setting osd data
This ends up being a rather large patch but what it's doing is
somewhat straightforward.

Basically, this is replacing two calls with one.  The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters.  In place of those two will be a single function that
initializes the op directly.

That means we sort of fan out a set of the needed functions:
    - extent ops with pages data
    - extent ops with pagelist data
    - extent ops with bio list data
and
    - class ops with page data for receiving a response

We also have define another one, but it's only used internally:
    - class ops with pagelist data for request parameters

Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields.  All the osd ops refer to them for
their data.  For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:23 -07:00
Alex Elder 39b44cbe86 libceph: set message data when building osd request
All calls of ceph_osdc_start_request() are preceded (in the case of
rbd, almost) immediately by a call to ceph_osdc_build_request().

Move the build calls at the top of ceph_osdc_start_request() out of
there and into the ceph_osdc_build_request().  Nothing prevents
moving these calls to the top of ceph_osdc_build_request(), either
(and we're going to want them there in the next patch) so put them
at the top.

This and the next patch are related to:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:22 -07:00
Alex Elder e65550fd94 libceph: move ceph_osdc_build_request()
This simply moves ceph_osdc_build_request() later in its source
file without any change.  Done as a separate patch to facilitate
review of the change in the next patch.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:21 -07:00
Alex Elder 5f562df5f5 libceph: format class info at init time
An object class method is formatted using a pagelist which contains
the class name, the method name, and the data concatenated into an
osd request's outbound data.

Currently when a class op is initialized in osd_req_op_cls_init(),
the lengths of and pointers to these three items are recorded.
Later, when the op is getting formatted into the request message, a
new pagelist is created and that is when these items get copied into
the pagelist.

This patch makes it so the pagelist to hold these items is created
when the op is initialized instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:19 -07:00
Alex Elder c99d2d4abb libceph: specify osd op by index in request
An osd request now holds all of its source op structures, and every
place that initializes one of these is in fact initializing one
of the entries in the the osd request's array.

So rather than supplying the address of the op to initialize, have
caller specify the osd request and an indication of which op it
would like to initialize.  This better hides the details the
op structure (and faciltates moving the data pointers they use).

Since osd_req_op_init() is a common routine, and it's not used
outside the osd client code, give it static scope.  Also make
it return the address of the specified op (so all the other
init routines don't have to repeat that code).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:15 -07:00
Alex Elder 8c042b0df9 libceph: add data pointers in osd op structures
An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message.  Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.

Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message.  The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.

Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient.  Add some assertions to verify
pointers are always set the way they're expected to be.

This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.

This is the first in a series of patches that resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:14 -07:00
Alex Elder 54d5064912 libceph: rename data out field in osd request op
There are fields "indata" and "indata_len" defined the ceph osd
request op structure.  The "in" part is with from the point of view
of the osd server, but is a little confusing here on the client
side.  Change their names to use "request" instead of "in" to
indicate that it defines data provided with the request (as opposed
the data returned in the response).

Rename the local variable in osd_req_encode_op() to match.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:13 -07:00
Alex Elder 79528734f3 libceph: keep source rather than message osd op array
An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:12 -07:00
Alex Elder 23c08a9cb2 libceph: define ceph_osd_data_length()
One more osd data helper, which returns the length of the
data item, regardless of its type.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:09 -07:00
Alex Elder c54d47bfad libceph: define a few more helpers
Define ceph_osd_data_init() and ceph_osd_data_release() to clean up
a little code.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:08 -07:00
Alex Elder 43bfe5de9f libceph: define osd data initialization helpers
Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:06 -07:00
Alex Elder 9fc6e06471 libceph: compute incoming bytes once
This is a simple change, extracting the number of incoming data
bytes just once in handle_reply().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:05 -07:00
Alex Elder e5975c7c8e ceph: build osd request message later for writepages
Hold off building the osd request message in ceph_writepages_start()
until just before it will be submitted to the osd client for
execution.

We'll still create the request and allocate the page pointer array
after we learn we have at least one page to write.  A local variable
will be used to keep track of the allocated array of pages.  Wait
until just before submitting the request for assigning that page
array pointer to the request message.

Create ands use a new function osd_req_op_extent_update() whose
purpose is to serve this one spot where the length value supplied
when an osd request's op was initially formatted might need to get
changed (reduced, never increased) before submitting the request.

Previously, ceph_writepages_start() assigned the message header's
data length because of this update.  That's no longer necessary,
because ceph_osdc_build_request() will recalculate the right
value to use based on the content of the ops in the request.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:02 -07:00
Alex Elder 02ee07d300 libceph: hold off building osd request
Defer building the osd request until just before submitting it in
all callers except ceph_writepages_start().  (That caller will be
handed in the next patch.)

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:01 -07:00
Alex Elder acead002b2 libceph: don't build request in ceph_osdc_new_request()
This patch moves the call to ceph_osdc_build_request() out of
ceph_osdc_new_request() and into its caller.

This is in order to defer formatting osd operation information into
the request message until just before request is started.

The only unusual (ab)user of ceph_osdc_build_request() is
ceph_writepages_start(), where the final length of write request may
change (downward) based on the current inode size or the oldest
snapshot context with dirty data for the inode.

The remaining callers don't change anything in the request after has
been built.

This means the ops array is now supplied by the caller.  It also
means there is no need to pass the mtime to ceph_osdc_new_request()
(it gets provided to ceph_osdc_build_request()).  And rather than
passing a do_sync flag, have the number of ops in the ops array
supplied imply adding a second STARTSYNC operation after the READ or
WRITE requested.

This and some of the patches that follow are related to having the
messenger (only) be responsible for filling the content of the
message header, as described here:
    http://tracker.ceph.com/issues/4589

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:58 -07:00
Alex Elder a193080481 libceph: record message data length
Keep track of the length of the data portion for a message in a
separate field in the ceph_msg structure.  This information has
been maintained in wire byte order in the message header, but
that's going to change soon.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:57 -07:00
Alex Elder ace6d3a96f libceph: drop ceph_osd_request->r_con_filling_msg
A field in an osd request keeps track of whether a connection is
currently filling the request's reply message.  This patch gets rid
of that field.

An osd request includes two messages--a request and a reply--and
they're both associated with the connection that existed to its
the target osd at the time the request was created.

An osd request can be dropped early, even when it's in flight.
And at that time both messages are released.  It's possible the
reply message has been supplied to its connection to receive
an incoming response message at the time the osd request gets
dropped.  So ceph_osdc_release_request() revokes that message
from the connection before releasing it so things get cleaned up
properly.

Previously this may have caused a problem, because the connection
that a message was associated with might have gone away before the
revoke request.  And to avoid any problems using that connection,
the osd client held a reference to it when it supplies its response
message.

However since this commit:
    38941f80 libceph: have messages point to their connection
all messages hold a reference to the connection they are associated
with whenever the connection is actively operating on the message
(i.e. while the message is queued to send or sending, and when it
data is being received into it).  And if a message has no connection
associated with it, ceph_msg_revoke_incoming() won't do anything
when asked to revoke it.

As a result, there is no need to keep an additional reference to the
connection associated with a message when we hand the message to the
messenger when it calls our alloc_msg() method to receive something.
If the connection *were* operating on it, it would have its own
reference, and if not, there's no work to be done when we need to
revoke it.

So get rid of the osd request's r_con_filling_msg field.

This resolves:
    http://tracker.ceph.com/issues/4647

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:54 -07:00
Alex Elder ef4859d647 libceph: define ceph_decode_pgid() only once
There are two basically identical definitions of __decode_pgid()
in libceph, one in "net/ceph/osdmap.c" and the other in
"net/ceph/osd_client.c".  Get rid of both, and instead define
a single inline version in "include/linux/ceph/osdmap.h".

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:52 -07:00
Alex Elder 8058fd4503 libceph: drop mutex on error in handle_reply()
The osd client mutex is acquired just before getting a reference to
a request in handle_reply().  However the error paths after that
don't drop the mutex before returning as they should.

Drop the mutex after dropping the request reference.  Also add a
bad_mutex label at that point and use it so the failed request
lookup case can be handled with the rest.

This resolves:
    http://tracker.ceph.com/issues/4615

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:17:51 -07:00
Alex Elder b0270324c5 libceph: use osd_req_op_extent_init()
Use osd_req_op_extent_init() in ceph_osdc_new_request() to
initialize the one or two ops built in that function.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:49 -07:00
Alex Elder d18d1e2807 libceph: clean up ceph_osd_new_request()
All callers of ceph_osd_new_request() pass either CEPH_OSD_OP_READ
or CEPH_OSD_OP_WRITE as the opcode value.  The function assumes it
by filling in the extent fields in the ops array it builds.  So just
assert that is the case, and don't bother calling op_has_extent()
before filling in the first osd operation in the array.

Define some local variables to gather the information to fill into
the first op, and then fill in the op array all in one place.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:48 -07:00
Alex Elder a19dadfba9 libceph: don't update op in calc_layout()
The ceph_osdc_new_request() an array of osd operations is built up
and filled in partially within that function and partially in the
called function calc_layout().  Move the latter part back out to
ceph_osdc_new_request() so it's all done in one place.  This makes
it unnecessary to pass the op pointer to calc_layout(), so get rid
of that parameter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:47 -07:00
Alex Elder 75d1c941e5 libceph: pass offset and length out of calc_layout()
The purpose of calc_layout() is to determine, given a file offset
and length and a layout describing the placement of file data across
objects, where in "object space" that data resides.

Specifically, it determines which object should hold the first part
of the specified range of file data, and the offset and length of
data within that object.  The length will not exceed the bounds
of the object, and the caller is informed of that maximum length.

Add two parameters to calc_layout() to allow the object-relative
offset and length to be passed back to the caller.

This is the first steps toward having ceph_osdc_new_request() build
its osd op structure using osd_req_op_extent_init().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:46 -07:00
Alex Elder 33803f3300 libceph: define source request op functions
The rbd code has a function that allocates and populates a
ceph_osd_req_op structure (the in-core version of an osd request
operation).  When reviewed, Josh suggested two things: that the
big varargs function might be better split into type-specific
functions; and that this functionality really belongs in the osd
client rather than rbd.

This patch implements both of Josh's suggestions.  It breaks
up the rbd function into separate functions and defines them
in the osd client module as exported interfaces.  Unlike the
rbd version, however, the functions don't allocate an osd_req_op
structure; they are provided the address of one and that is
initialized instead.

The rbd function has been eliminated and calls to it have been
replaced by calls to the new routines.  The rbd code now now use a
stack (struct) variable to hold the op rather than allocating and
freeing it each time.

For now only the capabilities used by rbd are implemented.
Implementing all the other osd op types, and making the rest of the
code use it will be done separately, in the next few patches.

Note that only the extent, cls, and watch portions of the
ceph_osd_req_op structure are currently used.  Delete the others
(xattr, pgls, and snap) from its definition so nobody thinks it's
actually implemented or needed.  We can add it back again later
if needed, when we know it's been tested.

This (and a few follow-on patches) resolves:
    http://tracker.ceph.com/issues/3861

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:45 -07:00
Alex Elder a8dd0a37bc libceph: define osd_req_opcode_valid()
Define a separate function to determine the validity of an opcode,
and use it inside osd_req_encode_op() in order to unclutter that
function.

Don't update the destination op at all--and return zero--if an
unsupported or unrecognized opcode is seen in osd_req_encode_op().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:17:44 -07:00