Commit Graph

20258 Commits

Author SHA1 Message Date
Alexei Starovoitov d691f9e8d4 bpf: allow programs to write to certain skb fields
allow programs read/write skb->mark, tc_index fields and
((struct qdisc_skb_cb *)cb)->data.

mark and tc_index are generically useful in TC.
cb[0]-cb[4] are primarily used to pass arguments from one
program to another called via bpf_tail_call() which can
be seen in sockex3_kern.c example.

All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs.
mark, tc_index are writeable from tc_cls_act only.
cb[0]-cb[4] are writeable by both sockets and tc_cls_act.

Add verifier tests and improve sample code.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07 02:01:33 -07:00
David S. Miller dda922c831 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/amd-xgbe-phy.c
	drivers/net/wireless/iwlwifi/Kconfig
	include/net/mac80211.h

iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.

The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 22:51:30 -07:00
Daniel Borkmann 3324b584b6 ebpf: misc core cleanup
Besides others, move bpf_tail_call_proto to the remaining definitions
of other protos, improve comments a bit (i.e. remove some obvious ones,
where the code is already self-documenting, add objectives for others),
simplify bpf_prog_array_compatible() a bit.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31 21:44:44 -07:00
Daniel Borkmann 17ca8cbf49 ebpf: allow bpf_ktime_get_ns_proto also for networking
As this is already exported from tracing side via commit d9847d310a
("tracing: Allow BPF programs to call bpf_ktime_get_ns()"), we might
as well want to move it to the core, so also networking users can make
use of it, e.g. to measure diffs for certain flows from ingress/egress.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31 21:44:44 -07:00
Alexei Starovoitov abf2e7d6e2 bpf: add missing rcu protection when releasing programs from prog_array
Normally the program attachment place (like sockets, qdiscs) takes
care of rcu protection and calls bpf_prog_put() after a grace period.
The programs stored inside prog_array may not be attached anywhere,
so prog_array needs to take care of preserving rcu protection.
Otherwise bpf_tail_call() will race with bpf_prog_put().
To solve that introduce bpf_prog_put_rcu() helper function and use
it in 3 places where unattached program can decrement refcnt:
closing program fd, deleting/replacing program in prog_array.

Fixes: 04fd61ab36 ("bpf: allow bpf programs to tail-call other bpf programs")
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31 00:27:51 -07:00
Linus Torvalds 6e49ba1bb1 ** NOW WITH TESTING! **
Two fixes which got lost in my recent distraction.  One is a weird
 cpumask function which needed to be rewritten, the other is a module
 bug which is cc:stable.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVaBENAAoJENkgDmzRrbjxxL4QAJMFwo21VN8rwIsEJ2P/Yh4u
 YXxJtnbrSPZtyad8J4G6FGOOfM7ImkkADhGJE8MN05goIFmeORWduAiozBtZBfo3
 OVpeo0HIGTEMXq/QCxSQsDhP9MSeWV592vjhlqQJ2KhU9Gpstc/Ub9ArVWuY3FD3
 CFN6ciw+5DIhoc6jMI2P9XX7jpR4VOBu320j+3lQ1QZ1aEZIaPefWH+VYuIZXirq
 E6N4yKgTahKb1Clr0DS6EB2Z5g+upNzFf4WBHaChP5EklwatZkHAOvzfSLWcbShI
 ochGV5LBPcn7ruqOD5mR4LGkxfQSYPCKCKihmenD/EVoO/dshKOQREfsqRXNsh5X
 xk4yx/VCy68ubIjx7FIDL18qDvJrX82+Z2bYZbENvKrVinaQ7MWB+CokK0fNW0ai
 ZMP5s32vSUZMMIIE7+fS4n3BLUxOpLZC8S0wIac19jNKzCHVTuhnUolCHk11zQLk
 IIDHEJwzvWtPjKOyUyd7HG0bYeczwf8DZgHg+xom9BNbHbK3Jk5d1Sibjgf8eGg+
 O36XR8FYYvqHwqqrPKSSaWoLj578/IWyHZg/V4tQ2HWi189BVHk6Iw2knftsvvPw
 pBu2AdbRSLLD+X/pwrdmm+xgytjUIr1X/Qnwj/eE5MvB/vaVVwV0OjapU/Z6S+dL
 JrZGvbWcviyjpvGD+vG1
 =wuP+
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull fixes for cpumask and modules from Rusty Russell:
 "** NOW WITH TESTING! **

  Two fixes which got lost in my recent distraction.  One is a weird
  cpumask function which needed to be rewritten, the other is a module
  bug which is cc:stable"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  cpumask_set_cpu_local_first => cpumask_local_spread, lament
  module: Call module notifier on failure after complete_formation()
2015-05-29 11:24:28 -07:00
Linus Torvalds c5db6a3bde Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
 "One more fix from the timer departement:

    - Handle division of negative nanosecond values proper on 32bit.

      A recent cleanup wrecked the sign handling of the dividend and
      dropped the check for negative divisors"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ktime: Fix ktime_divns to do signed division
2015-05-23 17:57:40 -07:00
David S. Miller 36583eb54d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c
	drivers/net/phy/phy.c
	include/linux/skbuff.h
	net/ipv4/tcp.c
	net/switchdev/switchdev.c

Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.

phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.

tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.

macb.c involved the addition of two zyncq device entries.

skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 01:22:35 -04:00
Linus Torvalds 1c8df7bd48 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "Three small fixes that have been picked up the last few weeks.
  Specifically:

   - Fix a memory corruption issue in NVMe with malignant user
     constructed request.  From Christoph.

   - Kill (now) unused blk_queue_bio(), dm was changed to not need this
     anymore.  From Mike Snitzer.

   - Always use blk_schedule_flush_plug() from the io_schedule() path
     when flushing a plug, fixing a !TASK_RUNNING warning with md.  From
     Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block:
  sched: always use blk_schedule_flush_plug in io_schedule_out
  nvme: fix kernel memory corruption with short INQUIRY buffers
  block: remove export for blk_queue_bio
2015-05-22 15:15:30 -07:00
Alexei Starovoitov 04fd61ab36 bpf: allow bpf programs to tail-call other bpf programs
introduce bpf_tail_call(ctx, &jmp_table, index) helper function
which can be used from BPF programs like:
int bpf_prog(struct pt_regs *ctx)
{
  ...
  bpf_tail_call(ctx, &jmp_table, index);
  ...
}
that is roughly equivalent to:
int bpf_prog(struct pt_regs *ctx)
{
  ...
  if (jmp_table[index])
    return (*jmp_table[index])(ctx);
  ...
}
The important detail that it's not a normal call, but a tail call.
The kernel stack is precious, so this helper reuses the current
stack frame and jumps into another BPF program without adding
extra call frame.
It's trivially done in interpreter and a bit trickier in JITs.
In case of x64 JIT the bigger part of generated assembler prologue
is common for all programs, so it is simply skipped while jumping.
Other JITs can do similar prologue-skipping optimization or
do stack unwind before jumping into the next program.

bpf_tail_call() arguments:
ctx - context pointer
jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table
index - index in the jump table

Since all BPF programs are idenitified by file descriptor, user space
need to populate the jmp_table with FDs of other BPF programs.
If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere
and program execution continues as normal.

New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can
populate this jmp_table array with FDs of other bpf programs.
Programs can share the same jmp_table array or use multiple jmp_tables.

The chain of tail calls can form unpredictable dynamic loops therefore
tail_call_cnt is used to limit the number of calls and currently is set to 32.

Use cases:
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

==========
- simplify complex programs by splitting them into a sequence of small programs

- dispatch routine
  For tracing and future seccomp the program may be triggered on all system
  calls, but processing of syscall arguments will be different. It's more
  efficient to implement them as:
  int syscall_entry(struct seccomp_data *ctx)
  {
     bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */);
     ... default: process unknown syscall ...
  }
  int sys_write_event(struct seccomp_data *ctx) {...}
  int sys_read_event(struct seccomp_data *ctx) {...}
  syscall_jmp_table[__NR_write] = sys_write_event;
  syscall_jmp_table[__NR_read] = sys_read_event;

  For networking the program may call into different parsers depending on
  packet format, like:
  int packet_parser(struct __sk_buff *skb)
  {
     ... parse L2, L3 here ...
     __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol));
     bpf_tail_call(skb, &ipproto_jmp_table, ipproto);
     ... default: process unknown protocol ...
  }
  int parse_tcp(struct __sk_buff *skb) {...}
  int parse_udp(struct __sk_buff *skb) {...}
  ipproto_jmp_table[IPPROTO_TCP] = parse_tcp;
  ipproto_jmp_table[IPPROTO_UDP] = parse_udp;

- for TC use case, bpf_tail_call() allows to implement reclassify-like logic

- bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table
  are atomic, so user space can build chains of BPF programs on the fly

Implementation details:
=======================
- high performance of bpf_tail_call() is the goal.
  It could have been implemented without JIT changes as a wrapper on top of
  BPF_PROG_RUN() macro, but with two downsides:
  . all programs would have to pay performance penalty for this feature and
    tail call itself would be slower, since mandatory stack unwind, return,
    stack allocate would be done for every tailcall.
  . tailcall would be limited to programs running preempt_disabled, since
    generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would
    need to be either global per_cpu variable accessed by helper and by wrapper
    or global variable protected by locks.

  In this implementation x64 JIT bypasses stack unwind and jumps into the
  callee program after prologue.

- bpf_prog_array_compatible() ensures that prog_type of callee and caller
  are the same and JITed/non-JITed flag is the same, since calling JITed
  program from non-JITed is invalid, since stack frames are different.
  Similarly calling kprobe type program from socket type program is invalid.

- jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map'
  abstraction, its user space API and all of verifier logic.
  It's in the existing arraymap.c file, since several functions are
  shared with regular array map.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21 17:07:59 -04:00
Michal Hocko 1173ff09b9 watchdog: fix double lock in watchdog_nmi_enable_all
Commit ab992dc38f ("watchdog: Fix merge 'conflict'") has introduced an
obvious deadlock because of a typo.  watchdog_proc_mutex should be
unlocked on exit.

Thanks to Miroslav Benes who was staring at the code with me and noticed
this.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Duh-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-19 10:57:03 -07:00
Shaohua Li 10d784eae2 sched: always use blk_schedule_flush_plug in io_schedule_out
block plug callback could sleep, so we introduce a parameter
'from_schedule' and corresponding drivers can use it to destinguish a
schedule plug flush or a plug finish. Unfortunately io_schedule_out
still uses blk_flush_plug(). This causes below output (Note, I added a
might_sleep() in raid1_unplug to make it trigger faster, but the whole
thing doesn't matter if I add might_sleep). In raid1/10, this can cause
deadlock.

This patch makes io_schedule_out always uses blk_schedule_flush_plug.
This should only impact drivers (as far as I know, raid 1/10) which are
sensitive to the 'from_schedule' parameter.

[  370.817949] ------------[ cut here ]------------
[  370.817960] WARNING: CPU: 7 PID: 145 at ../kernel/sched/core.c:7306 __might_sleep+0x7f/0x90()
[  370.817969] do not call blocking ops when !TASK_RUNNING; state=2 set at [<ffffffff81092fcf>] prepare_to_wait+0x2f/0x90
[  370.817971] Modules linked in: raid1
[  370.817976] CPU: 7 PID: 145 Comm: kworker/u16:9 Tainted: G        W       4.0.0+ #361
[  370.817977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[  370.817983] Workqueue: writeback bdi_writeback_workfn (flush-9:1)
[  370.817985]  ffffffff81cd83be ffff8800ba8cb298 ffffffff819dd7af 0000000000000001
[  370.817988]  ffff8800ba8cb2e8 ffff8800ba8cb2d8 ffffffff81051afc ffff8800ba8cb2c8
[  370.817990]  ffffffffa00061a8 000000000000041e 0000000000000000 ffff8800ba8cba28
[  370.817993] Call Trace:
[  370.817999]  [<ffffffff819dd7af>] dump_stack+0x4f/0x7b
[  370.818002]  [<ffffffff81051afc>] warn_slowpath_common+0x8c/0xd0
[  370.818004]  [<ffffffff81051b86>] warn_slowpath_fmt+0x46/0x50
[  370.818006]  [<ffffffff81092fcf>] ? prepare_to_wait+0x2f/0x90
[  370.818008]  [<ffffffff81092fcf>] ? prepare_to_wait+0x2f/0x90
[  370.818010]  [<ffffffff810776ef>] __might_sleep+0x7f/0x90
[  370.818014]  [<ffffffffa0000c03>] raid1_unplug+0xd3/0x170 [raid1]
[  370.818024]  [<ffffffff81421d9a>] blk_flush_plug_list+0x8a/0x1e0
[  370.818028]  [<ffffffff819e3550>] ? bit_wait+0x50/0x50
[  370.818031]  [<ffffffff819e21b0>] io_schedule_timeout+0x130/0x140
[  370.818033]  [<ffffffff819e3586>] bit_wait_io+0x36/0x50
[  370.818034]  [<ffffffff819e31b5>] __wait_on_bit+0x65/0x90
[  370.818041]  [<ffffffff8125b67c>] ? ext4_read_block_bitmap_nowait+0xbc/0x630
[  370.818043]  [<ffffffff819e3550>] ? bit_wait+0x50/0x50
[  370.818045]  [<ffffffff819e3302>] out_of_line_wait_on_bit+0x72/0x80
[  370.818047]  [<ffffffff810935e0>] ? autoremove_wake_function+0x40/0x40
[  370.818050]  [<ffffffff811de744>] __wait_on_buffer+0x44/0x50
[  370.818053]  [<ffffffff8125ae80>] ext4_wait_block_bitmap+0xe0/0xf0
[  370.818058]  [<ffffffff812975d6>] ext4_mb_init_cache+0x206/0x790
[  370.818062]  [<ffffffff8114bc6c>] ? lru_cache_add+0x1c/0x50
[  370.818064]  [<ffffffff81297c7e>] ext4_mb_init_group+0x11e/0x200
[  370.818066]  [<ffffffff81298231>] ext4_mb_load_buddy+0x341/0x360
[  370.818068]  [<ffffffff8129a1a3>] ext4_mb_find_by_goal+0x93/0x2f0
[  370.818070]  [<ffffffff81295b54>] ? ext4_mb_normalize_request+0x1e4/0x5b0
[  370.818072]  [<ffffffff8129ab67>] ext4_mb_regular_allocator+0x67/0x460
[  370.818074]  [<ffffffff81295b54>] ? ext4_mb_normalize_request+0x1e4/0x5b0
[  370.818076]  [<ffffffff8129ca4b>] ext4_mb_new_blocks+0x4cb/0x620
[  370.818079]  [<ffffffff81290956>] ext4_ext_map_blocks+0x4c6/0x14d0
[  370.818081]  [<ffffffff812a4d4e>] ? ext4_es_lookup_extent+0x4e/0x290
[  370.818085]  [<ffffffff8126399d>] ext4_map_blocks+0x14d/0x4f0
[  370.818088]  [<ffffffff81266fbd>] ext4_writepages+0x76d/0xe50
[  370.818094]  [<ffffffff81149691>] do_writepages+0x21/0x50
[  370.818097]  [<ffffffff811d5c00>] __writeback_single_inode+0x60/0x490
[  370.818099]  [<ffffffff811d630a>] writeback_sb_inodes+0x2da/0x590
[  370.818103]  [<ffffffff811abf4b>] ? trylock_super+0x1b/0x50
[  370.818105]  [<ffffffff811abf4b>] ? trylock_super+0x1b/0x50
[  370.818107]  [<ffffffff811d665f>] __writeback_inodes_wb+0x9f/0xd0
[  370.818109]  [<ffffffff811d69db>] wb_writeback+0x34b/0x3c0
[  370.818111]  [<ffffffff811d70df>] bdi_writeback_workfn+0x23f/0x550
[  370.818116]  [<ffffffff8106bbd8>] process_one_work+0x1c8/0x570
[  370.818117]  [<ffffffff8106bb5b>] ? process_one_work+0x14b/0x570
[  370.818119]  [<ffffffff8106c09b>] worker_thread+0x11b/0x470
[  370.818121]  [<ffffffff8106bf80>] ? process_one_work+0x570/0x570
[  370.818124]  [<ffffffff81071868>] kthread+0xf8/0x110
[  370.818126]  [<ffffffff81071770>] ? kthread_create_on_node+0x210/0x210
[  370.818129]  [<ffffffff819e9322>] ret_from_fork+0x42/0x70
[  370.818131]  [<ffffffff81071770>] ? kthread_create_on_node+0x210/0x210
[  370.818132] ---[ end trace 7b4deb71e68b6605 ]---

V2: don't change ->in_iowait

Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-18 16:06:41 -06:00
Peter Zijlstra ab992dc38f watchdog: Fix merge 'conflict'
Two watchdog changes that came through different trees had a non
conflicting conflict, that is, one changed the semantics of a variable
but no actual code conflict happened. So the merge appeared fine, but
the resulting code did not behave as expected.

Commit 195daf665a ("watchdog: enable the new user interface of the
watchdog mechanism") changes the semantics of watchdog_user_enabled,
which thereafter is only used by the functions introduced by
b3738d2932 ("watchdog: Add watchdog enable/disable all functions").

There further appears to be a distinct lack of serialization between
setting and using watchdog_enabled, so perhaps we should wrap the
{en,dis}able_all() things in watchdog_proc_mutex.

This patch fixes a s2r failure reported by Michal; which I cannot
readily explain. But this does make the code internally consistent
again.

Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-18 10:08:29 -07:00
Linus Torvalds 14db1e8dc0 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "Two fixes: a suspend/resume related regression fix, and an RT priority
  boosting fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix regression in cpuset_cpu_inactive() for suspend
  sched: Handle priority boosted tasks proper in setscheduler()
2015-05-15 12:42:33 -07:00
Linus Torvalds ef4a293a44 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also a lockdep annotation fix, a PMU event
  list fix and a new model addition"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/liblockdep: Fix compilation error
  tools/liblockdep: Fix linker error in case of cross compile
  perf tools: Use getconf to determine number of online CPUs
  tools: Fix tools/vm build
  perf/x86/rapl: Enable Broadwell-U RAPL support
  perf/x86/intel: Fix SLM cache event list
  perf: Annotate inherited event ctx->mutex recursion
2015-05-15 12:38:21 -07:00
David S. Miller b04096ff33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Four minor merge conflicts:

1) qca_spi.c renamed the local variable used for the SPI device
   from spi_device to spi, meanwhile the spi_set_drvdata() call
   got moved further up in the probe function.

2) Two changes were both adding new members to codel params
   structure, and thus we had overlapping changes to the
   initializer function.

3) 'net' was making a fix to sk_release_kernel() which is
   completely removed in 'net-next'.

4) In net_namespace.c, the rtnl_net_fill() call for GET operations
   had the command value fixed, meanwhile 'net-next' adjusted the
   argument signature a bit.

This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:31:43 -04:00
John Stultz f7bcb70eba ktime: Fix ktime_divns to do signed division
It was noted that the 32bit implementation of ktime_divns()
was doing unsigned division and didn't properly handle
negative values.

And when a ktime helper was changed to utilize
ktime_divns, it caused a regression on some IR blasters.
See the following bugzilla for details:
  https://bugzilla.redhat.com/show_bug.cgi?id=1200353

This patch fixes the problem in ktime_divns by checking
and preserving the sign bit, and then reapplying it if
appropriate after the division, it also changes the return
type to a s64 to make it more obvious this is expected.

Nicolas also pointed out that negative dividers would
cause infinite loops on 32bit systems, negative dividers
is unlikely for users of this function, but out of caution
this patch adds checks for negative dividers for both
32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure
no such use cases creep in.

[ tglx: Hand an u64 to do_div() to avoid the compiler warning ]

Fixes: 166afb6451 'ktime: Sanitize ktime_to_us/ms conversion'
Reported-and-tested-by: Trevor Cordes <trevor@tecnopolis.ca>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-13 10:19:35 +02:00
Linus Torvalds 9d88f22a81 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "Two patches from the irq departement:

   - a simple fix to make dummy_irq_chip usable for wakeup scenarios

   - removal of the gic arch_extn hackery.  Now that all users are
     converted we really want to get rid of the interface so people wont
     come up with new use cases"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: gic: Drop support for gic_arch_extn
  genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip
2015-05-09 14:59:05 -07:00
Linus Torvalds 95f3b1f4b1 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
 "A simple fix to actually shut down a detached device instead of
  keeping it active"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Shutdown detached clockevent device
2015-05-09 14:57:49 -07:00
Daniel Borkmann ac67eb2c53 seccomp, filter: add and use bpf_prog_create_from_user from seccomp
Seccomp has always been a special candidate when it comes to preparation
of its filters in seccomp_prepare_filter(). Due to the extra checks and
filter rewrite it partially duplicates code and has BPF internals exposed.

This patch adds a generic API inside the BPF code code that seccomp can use
and thus keep it's filter preparation code minimal and better maintainable.
The other side-effect is that now classic JITs can add seccomp support as
well by only providing a BPF_LDX | BPF_W | BPF_ABS translation.

Tested with seccomp and BPF test suites.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 17:35:05 -04:00
Nicolas Schichan d9e12f42e5 seccomp: simplify seccomp_prepare_filter and reuse bpf_prepare_filter
Remove the calls to bpf_check_classic(), bpf_convert_filter() and
bpf_migrate_runtime() and let bpf_prepare_filter() take care of that
instead.

seccomp_check_filter() is passed to bpf_prepare_filter() so that it
gets called from there, after bpf_check_classic().

We can now remove exposure of two internal classic BPF functions
previously used by seccomp. The export of bpf_check_classic() symbol,
previously known as sk_chk_filter(), was there since pre git times,
and no in-tree module was using it, therefore remove it.

Joint work with Daniel Borkmann.

Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 17:35:05 -04:00
Linus Torvalds 26b293e854 The newly added ftrace_print_array_seq() function had a bug in it. Luckily,
the only user of it didn't make the 4.1 merge window. But the helper
 function should be fixed before 4.2 when the users start coming in.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVTBNUAAoJEEjnJuOKh9ld0VQIAJWPLivGbGJyjSqFd1NXLidS
 ytcbM0dquYjvQ94EDxoA+uBm34hk1JbvcI+FgiOihEeyGh7wrhdibEVGT40TzE2I
 XrfTVwPfN5/k2D5MeZzzRkeoTDufc33MgqTURymRQSzkmHf5GttPXxZ/ckO9Hz9A
 XqzXaHcmnauZSmUY12q8rMtbKYP/dN5hUdmR6p44bMgDJehQkmTzJkxbe6t98b+t
 8y3YAcK5HclYITC2lBVHSw5z8e9F/B7UmrNxvNkcV5kqdYg3NnVnA292kSMft5zo
 WRk1nH4eVARq2dmGQ289QpneHqtMx22RU42m/t8M/v0OUANhlPaDb/RHlyDWJF4=
 =4JGY
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "The newly added ftrace_print_array_seq() function had a bug in it.
  Luckily, the only user of it didn't make the 4.1 merge window.

  But the helper function should be fixed before 4.2 when the users
  start coming in"

* tag 'trace-fixes-v4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Make ftrace_print_array_seq compute buf_len
2015-05-08 18:22:05 -07:00
Steven Rostedt 37815bf866 module: Call module notifier on failure after complete_formation()
The module notifier call chain for MODULE_STATE_COMING was moved up before
the parsing of args, into the complete_formation() call. But if the module failed
to load after that, the notifier call chain for MODULE_STATE_GOING was
never called and that prevented the users of those call chains from
cleaning up anything that was allocated.

Link: http://lkml.kernel.org/r/554C52B9.9060700@gmail.com

Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Fixes: 4982223e51 "module: set nx before marking module MODULE_STATE_COMING"
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-09 03:29:24 +09:30
Peter Zijlstra 8b10c5e2b5 perf: Annotate inherited event ctx->mutex recursion
While fuzzing Sasha tripped over another ctx->mutex recursion lockdep
splat. Annotate this.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 11:59:40 +02:00
Omar Sandoval 533445c6e5 sched/core: Fix regression in cpuset_cpu_inactive() for suspend
Commit 3c18d447b3 ("sched/core: Check for available DL bandwidth in
cpuset_cpu_inactive()"), a SCHED_DEADLINE bugfix, had a logic error that
caused a regression in setting a CPU inactive during suspend. I ran into
this when a program was failing pthread_setaffinity_np() with EINVAL after
a suspend+wake up.

A simple reproducer:

	$ ./a.out
	sched_setaffinity: Success
	$ systemctl suspend
	$ ./a.out
	sched_setaffinity: Invalid argument

... where ./a.out is:

	#define _GNU_SOURCE
	#include <errno.h>
	#include <sched.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <unistd.h>

	int main(void)
	{
		long num_cores;
		cpu_set_t cpu_set;
		int ret;

		num_cores = sysconf(_SC_NPROCESSORS_ONLN);
		CPU_ZERO(&cpu_set);
		CPU_SET(num_cores - 1, &cpu_set);
		errno = 0;
		ret = sched_setaffinity(getpid(), sizeof(cpu_set), &cpu_set);
		perror("sched_setaffinity");
		return ret ? EXIT_FAILURE : EXIT_SUCCESS;
	}

The mistake is that suspend is handled in the action ==
CPU_DOWN_PREPARE_FROZEN case of the switch statement in
cpuset_cpu_inactive().

However, the commit in question masked out CPU_TASKS_FROZEN
from the action, making this case dead.

The fix is straightforward.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3c18d447b3 ("sched/core: Check for available DL bandwidth in cpuset_cpu_inactive()")
Link: http://lkml.kernel.org/r/1cb5ecb3d6543c38cce5790387f336f54ec8e2bc.1430733960.git.osandov@osandov.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 11:53:56 +02:00
Thomas Gleixner 0782e63bc6 sched: Handle priority boosted tasks proper in setscheduler()
Ronny reported that the following scenario is not handled correctly:

	T1 (prio = 10)
	   lock(rtmutex);

	T2 (prio = 20)
	   lock(rtmutex)
	      boost T1

	T1 (prio = 20)
	   sys_set_scheduler(prio = 30)
	   T1 prio = 30
	   ....
	   sys_set_scheduler(prio = 10)
	   T1 prio = 30

The last step is wrong as T1 should now be back at prio 20.

Commit c365c292d0 ("sched: Consider pi boosting in setscheduler()")
only handles the case where a boosted tasks tries to lower its
priority.

Fix it by taking the new effective priority into account for the
decision whether a change of the priority is required.

Reported-by: Ronny Meeus <ronny.meeus@gmail.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Fixes: c365c292d0 ("sched: Consider pi boosting in setscheduler()")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 11:53:55 +02:00
Alex Bennée ac01ce1410 tracing: Make ftrace_print_array_seq compute buf_len
The only caller to this function (__print_array) was getting it wrong by
passing the array length instead of buffer length. As the element size
was already being passed for other reasons it seems reasonable to push
the calculation of buffer length into the function.

Link: http://lkml.kernel.org/r/1430320727-14582-1-git-send-email-alex.bennee@linaro.org

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-06 23:03:23 -04:00
Linus Torvalds 02f0f5721e Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU fix from Ingo Molnar:
 "An RCU Kconfig fix that eliminates an annoying interactive kconfig
  question for CONFIG_RCU_TORTURE_TEST_SLOW_INIT"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Control grace-period delays directly from value
2015-05-06 10:26:37 -07:00
Linus Torvalds 6c3c1eb3c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Receive packet length needs to be adjust by 2 on RX to accomodate
    the two padding bytes in altera_tse driver.  From Vlastimil Setka.

 2) If rx frame is dropped due to out of memory in macb driver, we leave
    the receive ring descriptors in an undefined state.  From Punnaiah
    Choudary Kalluri

 3) Some netlink subsystems erroneously signal NLM_F_MULTI.  That is
    only for dumps.  Fix from Nicolas Dichtel.

 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via
    the ipv4_mtu() helper.  From Herbert Xu.

 5) Fix null deref in bridge netfilter, and miscalculated lengths in
    jump/goto nf_tables verdicts.  From Florian Westphal.

 6) Unhash ping sockets properly.

 7) Software implementation of BPF divide did 64/32 rather than 64/64
    bit divide.  The JITs got it right.  Fix from Alexei Starovoitov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  ipv4: Missing sk_nulls_node_init() in ping_unhash().
  net: fec: Fix RGMII-ID mode
  net/mlx4_en: Schedule napi when RX buffers allocation fails
  netxen_nic: use spin_[un]lock_bh around tx_clean_lock
  net/mlx4_core: Fix unaligned accesses
  mlx4_en: Use correct loop cursor in error path.
  cxgb4: Fix MC1 memory offset calculation
  bnx2x: Delay during kdump load
  net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table
  net: dsa: Fix scope of eeprom-length property
  net: macb: Fix race condition in driver when Rx frame is dropped
  hv_netvsc: Fix a bug in netvsc_start_xmit()
  altera_tse: Correct rx packet length
  mlx4: Fix tx ring affinity_mask creation
  tipc: fix problem with parallel link synchronization mechanism
  tipc: remove wrong use of NLM_F_MULTI
  bridge/nl: remove wrong use of NLM_F_MULTI
  bridge/mdb: remove wrong use of NLM_F_MULTI
  net: sched: act_connmark: don't zap skb->nfct
  trivial: net: systemport: bcmsysport.h: fix 0x0x prefix
  ...
2015-05-01 20:51:04 -07:00
Linus Torvalds 4a152c3913 Power management and ACPI fixes for v4.1-rc2
- Fix for a regression in the cpuidle core introduced by one of
    the recent commits in the clockevents_notify() removal series
    that put a call to a function which had to be executed with
    disabled interrupts into a code path running with enabled
    interrupts (Rafael J Wysocki).
 
  - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one
    of the recent ACPICA tools commits that added a duplicate typedef
    to one of the ACPICA's header files by mistake (Olaf Hering).
 
  - Fix for a regression in the ACPI SBS (Smart Battery Subsystem)
    driver introduced during the 3.18 development cycle causing the
    smart battery manager to be marked as not present when it should
    be marked as present (Chris Bainbridge).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVQoeSAAoJEILEb/54YlRxuscP/3Vz98JY0P7sMLnxVU8RPBxW
 cBN7G7F1gZup66/yV3MzvYHbgOFwNdQ2aMVxN+qV7rVMw27uwHljVr3svB+/GS15
 TeyKxvFWZYwhPKdsNAoHdkGBsptAK4DdyA+N2wH3MZ4dd8HepxpBG6QvzaEt4s43
 wFhhFrzEP3HDjrPoF/7TwKbsSrFuU5/U5PTd3dIuukj6JAl0PWnjczuVsg1PRyCW
 9kvefs3U56s8GbWOhDC+QyQ3eYJ2y35j/XnCKFWwljcdnis6HpsKj+oxSG2o0K4o
 9LLL3MgnTQuFbenuFIJUsMdFFdFrFkEeiV1EAdKCzQcXdlipxvi2cPttdNWVd6eZ
 JobXyhq7iYUQK5E5Dp6TCokxhzOyjvTo7VmEkkkqLVmfeO0FnggUAduRMAIacYXS
 ZML45m4UtvCJRoQXXxyzwYQXFeRD/nJQlOavC95jGGqtAij0Xk4xqTauQKIiqiaE
 zobOJ5ZxJMP+njFfzyDxjm68LjobYm1fUJTpWzpUSExjEKImRcw/QMzw23MyHHUL
 IJ7hP8FcELglkZWk/0ZwoNhbwM5Q2qGX5WMtqyunNFcf83aBsCr8bSjOrm4zmuL7
 NWjjeXuYwzPuC7SnFqf2K/CCfdkrdnU1frKLTpOm8t8W0P4mr1ckYrPemNemr8sN
 e5GozK5m13T2gTT4+q6M
 =v78a
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "Three regression fixes this time, one for a recent regression in the
  cpuidle core affecting multiple systems, one for an inadvertently
  added duplicate typedef in ACPICA that breaks compilation with GCC 4.5
  and one for an ACPI Smart Battery Subsystem driver regression
  introduced during the 3.18 cycle (stable-candidate).

  Specifics:

   - Fix for a regression in the cpuidle core introduced by one of the
     recent commits in the clockevents_notify() removal series that put
     a call to a function which had to be executed with disabled
     interrupts into a code path running with enabled interrupts (Rafael
     J Wysocki)

   - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one
     of the recent ACPICA tools commits that added a duplicate typedef
     to one of the ACPICA's header files by mistake (Olaf Hering)

   - Fix for a regression in the ACPI SBS (Smart Battery Subsystem)
     driver introduced during the 3.18 development cycle causing the
     smart battery manager to be marked as not present when it should be
     marked as present (Chris Bainbridge)"

* tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: Run tick_broadcast_exit() with disabled interrupts
  ACPI / SBS: Enable battery manager when present
  ACPICA: remove duplicate u8 typedef
2015-04-30 14:23:31 -07:00
Linus Torvalds 9dbbe3cfc3 Remove from guest code the handling of task migration during a
pvclock read; instead use the correct protocol in KVM.
 
 This removes the need for task migration notifiers in core
 scheduler code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJVQkUWAAoJEL/70l94x66DhfcH/A8RTHUOELtoy+v2weahn21m
 FFWEnEUlCWzYgmiddgFdlr6+ub386W3ryFsXKPqjrn/8LVv3yS7tK1NJF8d03LQw
 n7HtIsrF01E9UI8CIWO4S/mUxWQev6vEJ9NXtNrsJcRmhSeLaIZkPjTH8Zqyx4i9
 ZvG4731WHXmxvbJ03bfJU9Y8OwHXe55GMi614aTxPndVBGdvIRu2Oj6aTfQTeab/
 7tEujub0MKWp74a7eyNU4GItcvIAXZCQt2wMc5dN1VK3ma5FTOnHIOuhAb8mACFF
 qEeGhtxAnOf7W+s9J8i7zVBdA5MOS0vUKng361ZOVGDb0OLqcVADW7GpuTZfRAM=
 =2A7v
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm changes from Paolo Bonzini:
 "Remove from guest code the handling of task migration during a pvclock
  read; instead use the correct protocol in KVM.

  This removes the need for task migration notifiers in core scheduler
  code"

[ The scheduler people really hated the migration notifiers, so this was
  kind of required  - Linus ]

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86: pvclock: Really remove the sched notifier for cross-cpu migrations
  kvm: x86: fix kvmclock update protocol
2015-04-30 09:44:04 -07:00
David Howells 9c4249c8e0 modsign: change default key details
Change default key details to be more obviously unspecified.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-30 09:35:41 -07:00
Rafael J. Wysocki df8d9eeadd cpuidle: Run tick_broadcast_exit() with disabled interrupts
Commit 335f49196f (sched/idle: Use explicit broadcast oneshot
control function) replaced clockevents_notify() invocations in
cpuidle_idle_call() with direct calls to tick_broadcast_enter()
and tick_broadcast_exit(), but it overlooked the fact that
interrupts were already enabled before calling the latter which
led to functional breakage on systems using idle states with the
CPUIDLE_FLAG_TIMER_STOP flag set.

Fix that by moving the invocations of tick_broadcast_enter()
and tick_broadcast_exit() down into cpuidle_enter_state() where
interrupts are still disabled when tick_broadcast_exit() is
called.  Also ensure that interrupts will be disabled before
running tick_broadcast_exit() even if they have been enabled by
the idle state's ->enter callback.  Trigger a WARN_ON_ONCE() in
that case, as we generally don't want that to happen for states
with CPUIDLE_FLAG_TIMER_STOP set.

Fixes: 335f49196f (sched/idle: Use explicit broadcast oneshot control function)
Reported-and-tested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-29 15:19:21 +02:00
Linus Torvalds 14bc84ce0b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "One additional new feature for 4.1, a new PRNG based on SHA-512 for
  the zcrypt driver.

  Two memory management related changes, the page table reallocation for
  KVM is removed, and with file ptes gone the encoding of page table
  entries is improved.

  And three bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.
  s390/mm: change swap pte encoding and pgtable cleanup
  s390/mm: correct transfer of dirty & young bits in __pmd_to_pte
  s390/bpf: add dependency to z196 features
  s390/3215: free memory in error path
  s390/kvm: remove delayed reallocation of page tables for KVM
  kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP
2015-04-28 09:58:46 -07:00
Alexei Starovoitov 876a7ae65b bpf: fix 64-bit divide
ALU64_DIV instruction should be dividing 64-bit by 64-bit,
whereas do_div() does 64-bit by 32-bit divide.
x64 and arm64 JITs correctly implement 64 by 64 unsigned divide.
llvm BPF backend emits code assuming that ALU64_DIV does 64 by 64.

Fixes: 89aa075832 ("net: sock: allow eBPF programs to be attached to sockets")
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-27 23:11:49 -04:00
Paolo Bonzini 73459e2a1a x86: pvclock: Really remove the sched notifier for cross-cpu migrations
This reverts commits 0a4e6be9ca
and 80f7fdb1c7.

The task migration notifier was originally introduced in order to support
the pvclock vsyscall with non-synchronized TSC, but KVM only supports it
with synchronized TSC.  Hence, on KVM the race condition is only needed
due to a bad implementation on the host side, and even then it's so rare
that it's mostly theoretical.

As far as KVM is concerned it's possible to fix the host, avoiding the
additional complexity in the vDSO and the (re)introduction of the task
migration notifier.

Xen, on the other hand, hasn't yet implemented vsyscall support at
all, so we do not care about its plans for non-synchronized TSC.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27 15:49:30 +02:00
Linus Torvalds 9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Viresh Kumar 149aabcc44 clockevents: Shutdown detached clockevent device
A clockevent device is marked DETACHED when it is replaced by another
clockevent device.

The device is shutdown properly for drivers that implement legacy
->set_mode() callback, as we call ->set_mode() for CLOCK_EVT_MODE_UNUSED
as well.

But for the new per-state callback interface, we skip shutting down the
device, as we thought its an internal state change. That wasn't correct.

The effect is that the device is left programmed in oneshot or periodic
mode.

Fall-back to 'case CLOCK_EVT_STATE_SHUTDOWN', to shutdown the device.

Fixes: bd624d75db "clockevents: Introduce mode specific callbacks"
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/eef0a91c51b74d4e52c8e5a95eca27b5a0563f07.1428650683.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 21:01:48 +02:00
Roger Quadros 10a50f1ab5 genirq: Set IRQCHIP_SKIP_SET_WAKE flag for dummy_irq_chip
Without this system suspend is broken on systems that have
drivers calling enable/disable_irq_wake() for interrupts based off
the dummy irq hook. (e.g. drivers/gpio/gpio-pcf857x.c)

Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: <cw00.choi@samsung.com>
Cc: <balbi@ti.com>
Cc: <tony@atomide.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Link: http://lkml.kernel.org/r/552E1DD3.4040106@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 20:57:06 +02:00
Martin Schwidefsky 7e01b5acd8 kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP
Introduce KEXEC_CONTROL_MEMORY_GFP to allow the architecture code
to override the gfp flags of the allocation for the kexec control
page. The loop in kimage_alloc_normal_control_pages allocates pages
with GFP_KERNEL until a page is found that happens to have an
address smaller than the KEXEC_CONTROL_MEMORY_LIMIT. On systems
with a large memory size but a small KEXEC_CONTROL_MEMORY_LIMIT
the loop will keep allocating memory until the oom killer steps in.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23 16:52:01 +02:00
Linus Torvalds 27cf3a16b2 Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
 "Seven audit patches for v4.1, all bug fixes.

  The largest, and perhaps most significant commit helps resolve some
  memory pressure issues related to the inode cache and audit, there are
  also a few small commits which help resolve some timing issues with
  the audit log queue, and the rest fall into the always popular "code
  clean-up" category.

  In general, nothing really substantial, just a nice set of maintenance
  patches"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: Remove condition which always evaluates to false
  audit: reduce mmap_sem hold for mm->exe_file
  audit: consolidate handling of mm->exe_file
  audit: code clean up
  audit: don't reset working wait time accidentally with auditd
  audit: don't lose set wait time on first successful call to audit_log_start()
  audit: move the tree pruning to a dedicated thread
2015-04-22 14:49:23 -07:00
Linus Torvalds 4f2112351b This adds three fixes for the tracing code.
The first is a bug when ftrace_dump_on_oops is triggered in atomic context
 and function graph tracer is the tracer that is being reported.
 
 The second fix is bad parsing of the trace_events from the kernel
 command line, where it would ignore specific events if the system
 name is used with defining the event(it enables all events within the
 system).
 
 The last one is a fix to the TRACE_DEFINE_ENUM(), where a check was missing
 to see if the ptr was incremented to the end of the string, but the loop
 increments it again and can miss the nul delimiter to stop processing.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVN7g7AAoJEEjnJuOKh9ldLCkIAJj6wsj59wR8aIxtxnD5bJZZ
 Y9dKkas6BOaUCGp0MVBCkpm3uMgh0uPO10jOuthgc3LgQy0piwKJrIzGkI5gcRuA
 JvZw2X08/jCSNu8BHydes2A0XMkZobMuWFAeWz3CSzNBfbI3sDDqgnRQ9eyMM66R
 +sPV7ZELQLK/ZFs93gFoaZe/OKGYJcamhMtG2v7p9h1qBJZUDakRFo478bAwu5SB
 Kh6xpXA76WnmkeQekAAsWGdqIQzoNy3IoVePmdhVpZvoiKLUrf1JWVYFoNkO39Ik
 kC1gqJro0EmHQFOo5rt8yQmqXjvSU0sS/sAW3HZ0Szl5OtiUNnag+Wt3ku7lr8U=
 =VORa
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This adds three fixes for the tracing code.

  The first is a bug when ftrace_dump_on_oops is triggered in atomic
  context and function graph tracer is the tracer that is being
  reported.

  The second fix is bad parsing of the trace_events from the kernel
  command line, where it would ignore specific events if the system name
  is used with defining the event(it enables all events within the
  system).

  The last one is a fix to the TRACE_DEFINE_ENUM(), where a check was
  missing to see if the ptr was incremented to the end of the string,
  but the loop increments it again and can miss the nul delimiter to
  stop processing"

* tag 'trace-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix possible out of bounds memory access when parsing enums
  tracing: Fix incorrect enabling of trace events by boot cmdline
  tracing: Handle ftrace_dump() atomic context in graph_trace_open()
2015-04-22 11:27:36 -07:00
Linus Torvalds 15ce2658dd Quentin opened a can of worms by adding extable entry checking to modpost,
but most architectures seem fixed now.  Thanks to all involved.
 
 Last minute rebase because I noticed a "[PATCH]" had snuck into a commit
 message somehow.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVN1X3AAoJENkgDmzRrbjxmBEP/1Kv1wCrUGg07TfqNTJgr5Pe
 R81C+8P2wSEsA94lBhLNbn2DsN7uWsygcSXZMQ+5CrmbKAG45kRlMUzSlg6IdGXo
 usA9rOlH4hR+Dqn3zyx543xMJyp0a0LoSCLWGMmr/U71AXNp5kehvbIv64gJHrwg
 4CALI9qCwHH4FXF7WBYdLknlfpmD7KzCjIVckkfUfwf2A8mZXKdqBFQ+MPqbChEm
 vpFWkgp1oJgK4OcvvBeiNT2PwFZy1vmJtQWc2lieJ6HCjbqvwgM0g3EYTIQmccIm
 O40mEFMNkUuliMtrCZgOJBP2bmWy79JydiUq5Mu5Cb4bL6jGl2r6Z+w+iQ7Sggv9
 DTqTrk0/Cn02krJXDXAHVOXXgTqggf1xev6wr+3dbZn5sytQ8ddImuuVai8KALoC
 aEXAsnAK+3GnkAn9qqKVFhnrnCcI69I6srUAn5DKVWu36+Ye05FsZboIFYcxcK1F
 NZ+31xA17xA+yoo62ly/Auz7DXMa2QZfJcoQLMx2fMgL/+wMqzfGbcrZ5ZaVIj4w
 ePig1SbozAweAAfX7+W+QCQ3wqNN/nJgMO8vPldlcq7eaXH0/Dqu72cC2d82dK+H
 xl/1pEj83W0AkUkfNS8j3Z4zSzg31g8bK5SmPPRID00mx8roCfsP/Cfx5hRiO8U2
 ECtbKDxSyUWwF9vnOLVR
 =EYrW
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Quentin opened a can of worms by adding extable entry checking to
  modpost, but most architectures seem fixed now.  Thanks to all
  involved.

  Last minute rebase because I noticed a "[PATCH]" had snuck into a
  commit message somehow"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: don't emit section mismatch warnings for compiler optimizations
  modpost: expand pattern matching to support substring matches
  modpost: do not try to match the SHT_NUL section.
  modpost: fix extable entry size calculation.
  modpost: fix inverted logic in is_extable_fault_address().
  modpost: handle -ffunction-sections
  modpost: Whitelist .text.fixup and .exception.text
  params: handle quotes properly for values not of form foo="bar".
  modpost: document the use of struct section_check.
  modpost: handle relocations mismatch in __ex_table.
  scripts: add check_extable.sh script.
  modpost: mismatch_handler: retrieve tosym information only when needed.
  modpost: factorize symbol pretty print in get_pretty_name().
  modpost: add handler function pointer to sectioncheck.
  modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list.
  modpost: add strict white-listing when referencing sections.
  module: do not print allocation-fail warning on bogus user buffer size
  kernel/module.c: fix typos in message about unused symbols
2015-04-22 09:49:24 -07:00
Linus Torvalds 1fc149933f Char/Misc driver patches for 4.1-rc1
Here's the big char/misc driver patchset for 4.1-rc1.
 
 Lots of different driver subsystem updates here, nothing major, full
 details are in the shortlog below.
 
 All of this has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlU2IMEACgkQMUfUDdst+yloDQCfbyIRL23WVAn9ckQse/y8gbjB
 OT4AoKTJbwndDP9Kb/lrj2tjd9QjNVrC
 =xhen
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patchset for 4.1-rc1.

  Lots of different driver subsystem updates here, nothing major, full
  details are in the shortlog.

  All of this has been in linux-next for a while"

* tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits)
  mei: trace: remove unused TRACE_SYSTEM_STRING
  DTS: ARM: OMAP3-N900: Add lis3lv02d support
  Documentation: DT: lis302: update wakeup binding
  lis3lv02d: DT: add wakeup unit 2 and wakeup threshold
  lis3lv02d: DT: use s32 to support negative values
  Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case
  Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case
  mei: replace check for connection instead of transitioning
  mei: use mei_cl_is_connected consistently
  mei: fix mei_poll operation
  hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg()
  Drivers: hv: hv_balloon: survive ballooning request with num_pages=0
  Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function
  Drivers: hv: hv_balloon: do not online pages in offline blocks
  hv: remove the per-channel workqueue
  hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind()
  hv: run non-blocking message handlers in the dispatch tasklet
  coresight: moving to new "hwtracing" directory
  coresight-tmc: Adding a status interface to sysfs
  coresight: remove the unnecessary configuration coresight-default-sink
  ...
2015-04-21 09:42:58 -07:00
Linus Torvalds 41d5e08ea8 TTY/Serial patches for 4.1-rc1
Here's the big tty/serial driver update for 4.1-rc1.
 
 It was delayed for a bit due to some questions surrounding some of the
 console command line parsing changes that are in here.  There's still
 one tiny regression for people who were previously putting multiple
 console command lines and expecting them all to be ignored for some odd
 reason, but Peter is working on fixing that.  If not, I'll send a revert
 for the offending patch, but I have faith that Peter can address it.
 
 Other than the console work here, there's the usual serial driver
 updates and changes, and a buch of 8250 reworks to try to make that
 driver easier to maintain over time, and have it support more devices in
 the future.
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlU2IcUACgkQMUfUDdst+ylFqACcC8LPhFEZg9aHn0hNUoqGK3rE
 5dUAnR4b8r/NYqjVoE9FJZgZfB/TqVi1
 =lyN/
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver update for 4.1-rc1.

  It was delayed for a bit due to some questions surrounding some of the
  console command line parsing changes that are in here.  There's still
  one tiny regression for people who were previously putting multiple
  console command lines and expecting them all to be ignored for some
  odd reason, but Peter is working on fixing that.  If not, I'll send a
  revert for the offending patch, but I have faith that Peter can
  address it.

  Other than the console work here, there's the usual serial driver
  updates and changes, and a buch of 8250 reworks to try to make that
  driver easier to maintain over time, and have it support more devices
  in the future.

  All of these have been in linux-next for a while"

* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  n_gsm: Drop unneeded cast on netdev_priv
  sc16is7xx: expose RTS inversion in RS-485 mode
  serial: 8250_pci: port failed after wakeup from S3
  earlycon: 8250: Document kernel command line options
  earlycon: 8250: Fix command line regression
  earlycon: Fix __earlycon_table stride
  tty: clean up the tty time logic a bit
  serial: 8250_dw: only get the clock rate in one place
  serial: 8250_dw: remove useless ACPI ID check
  dmaengine: hsu: move memory allocation to GFP_NOWAIT
  dmaengine: hsu: remove redundant pieces of code
  serial: 8250_pci: add Intel Tangier support
  dmaengine: hsu: add Intel Tangier PCI ID
  serial: 8250_pci: replace switch-case by formula for Intel MID
  serial: 8250_pci: replace switch-case by formula
  tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
  serial: jsm: some off by one bugs
  serial: xuartps: Fix check in console_setup().
  serial: xuartps: Get rid of register access macros.
  serial: xuartps: Fix iobase use.
  ...
2015-04-21 09:33:10 -07:00
Linus Torvalds 5224b9613b smp: Fix error case handling in smp_call_function_*()
Commit 8053871d0f ("smp: Fix smp_call_function_single_async()
locking") fixed the locking for the asynchronous smp-call case, but in
the process of moving the lock handling around, one of the error cases
ended up not unlocking the call data at all.

This went unnoticed on x86, because this is a "caller is buggy" case,
where the caller is trying to call a non-existent CPU.  But apparently
ARM does that (at least under qemu-arm).  Bindly doing cross-cpu calls
to random CPU's that aren't even online seems a bit fishy, but the error
handling was clearly not correct.

Simply add the missing "csd_unlock()" to the error path.

Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Analyzed-by: Rabin Vincent <rabin@rab.in>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-19 13:19:23 -07:00
Linus Torvalds 396c9df223 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
 "Two fixes: an smp-call fix and a lockdep fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Fix smp_call_function_single_async() locking
  lockdep: Make print_lock() robust against concurrent release
2015-04-18 11:23:42 -04:00
Ingo Molnar cb0f3f320d Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull RCU fix from Paul E. McKenney:

 "This series contains a single change that fixes Kconfig asking pointless
  questions."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-18 14:49:41 +02:00
Linus Torvalds 388f997620 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix verifier memory corruption and other bugs in BPF layer, from
    Alexei Starovoitov.

 2) Add a conservative fix for doing BPF properly in the BPF classifier
    of the packet scheduler on ingress.  Also from Alexei.

 3) The SKB scrubber should not clear out the packet MARK and security
    label, from Herbert Xu.

 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue.

 5) Pause handling is not correct in the stmmac driver because it
    doesn't take into consideration the RX and TX fifo sizes.  From
    Vince Bridgers.

 6) Failure path missing unlock in FOU driver, from Wang Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  net: dsa: use DEVICE_ATTR_RW to declare temp1_max
  netns: remove BUG_ONs from net_generic()
  IB/ipoib: Fix ndo_get_iflink
  sfc: Fix memcpy() with const destination compiler warning.
  altera tse: Fix network-delays and -retransmissions after high throughput.
  net: remove unused 'dev' argument from netif_needs_gso()
  act_mirred: Fix bogus header when redirecting from VLAN
  inet_diag: fix access to tcp cc information
  tcp: tcp_get_info() should fetch socket fields once
  net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state()
  skbuff: Do not scrub skb mark within the same name space
  Revert "net: Reset secmark when scrubbing packet"
  bpf: fix two bugs in verification logic when accessing 'ctx' pointer
  bpf: fix bpf helpers to use skb->mac_header relative offsets
  stmmac: Configure Flow Control to work correctly based on rxfifo size
  stmmac: Enable unicast pause frame detect in GMAC Register 6
  stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree
  stmmac: Add defines and documentation for enabling flow control
  stmmac: Add properties for transmit and receive fifo sizes
  stmmac: fix oops on rmmod after assigning ip addr
  ...
2015-04-17 16:31:08 -04:00
Steven Rostedt (Red Hat) 3193899d4d tracing: Fix possible out of bounds memory access when parsing enums
The code that replaces the enum names with the enum values in the
tracepoints' format files could possible miss the end of string nul
character. This was caused by processing things like backslashes, quotes
and other tokens. After processing the tokens, a check for the nul
character needed to be done before continuing the loop, because the loop
incremented the pointer before doing the check, which could bypass the nul
character.

Link: http://lkml.kernel.org/r/552E661D.5060502@oracle.com

Reported-by: Sasha Levin <sasha.levin@oracle.com> # via KASan
Tested-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Fixes: 0c564a538a "tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-17 10:34:43 -04:00