Add a waitqueue head to the client structure. Have clients set a wait
on that queue prior to requesting a lock from the server. If the lock
is blocked, then we can use that to wait for wakeups.
Note that we do need to do this "manually" since we need to set the
wait on the waitqueue prior to requesting the lock, but requesting a
lock can involve activities that can block.
However, only do that for NFSv4.1 locks, either by compiling out
all of the waitqueue handling when CONFIG_NFS_V4_1 is disabled, or
skipping all of it at runtime if we're dealing with v4.0, or v4.1
servers that don't send lock callbacks.
Note too that even when we expect to get a lock callback, RFC5661
section 20.11.4 is pretty clear that we still need to poll for them,
so we do still sleep on a timeout. We do however always poll at the
longest interval in that case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
[Anna: nfs4_retry_setlk() "status" should default to -ERESTARTSYS]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For now, the callback doesn't do anything. Support for that will be
added in later patches.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If CB_SEQUENCE tells us that the processing of this request depends on
the completion of one or more referring triples (see RFC 5661 Section
2.10.6.3), delay the callback processing until after the RPC requests
being referred to have completed.
If we end up delaying for more than 1/2 second, then fall back to
returning NFS4ERR_DELAY in reply to the callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The slot table hasn't been an array since v3.7. Ensure that we
use nfs4_lookup_slot() to access the slot correctly.
Fixes: 87dda67e73 ("NFSv4.1: Allow SEQUENCE to resize the slot table...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.8+
We want to evaluate in this order:
If the client holds no layout for this inode, then return
NFS4ERR_NOMATCHING_LAYOUT; it probably forgot the layout.
If the client finds the inode among the list of layouts, but the corresponding
stateid has not yet been initialised, then return NFS4ERR_DELAY to ask the
server to retry once the outstanding LAYOUTGET is complete.
If the current layout stateid's "other" field does not match the recalled
stateid, return NFS4ERR_BAD_STATEID.
If already processing a layout recall with a newer stateid, return
NFS4ERR_OLD_STATEID. This can only happens for servers that are
non-compliant with the NFSv4.1 protocol.
If already processing a layout recall with an older stateid, return
NFS4ERR_DELAY to ask the server to retry once the outstanding
LAYOUTRETURN is complete. Again, this is technically incompliant with
the NFSv4.1 protocol.
If the current layout sequence id is newer than the recalled stateid's
sequence id, return NFS4ERR_OLD_STATEID. This too implies protocol
non-compliance.
If the current layout sequence id is older than the recalled stateid's
sequence id+1, return NFS4ERR_DELAY.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
LAYOUTRETURN is "special" in that servers and clients are expected to
work with old stateids. When the client sends a LAYOUTRETURN with an old
stateid in it then the server is expected to only tear down layout
segments that were present when that seqid was current. Ensure that the
client handles its accounting accordingly.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to initialize cb_sequenceres information when reporting a
NFS4ERR_RETRY_UNCACHED_REP error, since that will apply to the
next operation, not to the CB_SEQUENCE itself.
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Hook the callback channel into the same session management machinery
as we use for the forward channel.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We have no duplicate reply cache, so we always set the back channel
ca_maxresponsesize_cached to zero when negotiating the session.
That means we should always error out as soon as we see the server
set args->csa_cachethis.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
See RFC5661 Section 2.10.6.2: if retrying a request, and the old one is
still in progress, we must return NFS4ERR_DELAY as the reply to sequence.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Peng Tao points out that the call to pnfs_mark_matching_lsegs_return()
could race with pnfs_put_lseg(), in which case the layout segment is
cleared, but no layoutreturn will be sent.
Fix is to replace the call to pnfs_mark_matching_lsegs_invalid().
Reported-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the layout segment is invalid, then we should not be adding more
write requests to the commit list. Instead, those writes should be
replayed after requesting a new layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the client is promising to return the layout ASAP, then there is no
need to return DELAY and have the server retry. Instead default to the
normal procedure described in RFC5661.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The RFC requires us to check if the server is recalling a stateid that we
haven't yet received. If so, tell it to wait.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the client needs to delay the layout callback, then speed up the recall
process by marking the remaining layout segments to be actively returned
by the client.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This ensures that we don't reuse the stateid if a layout return or
implied layout return means that we've returned all layout segments
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's not needed to checking NFS_DEBUG before define NFSDBG_FACILITY, remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
All these functions do is call nfs41_ping_server() without adding
anything. Let's remove them and give nfs41_ping_server() a better name
instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix a callback slot table regression.
Fixes: e937ee714b ("nfs: Only update callback sequnce id when CB_SEQUENCE success")
Cc: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For a cb_layoutrecall replay, nfsd got CB_SEQUENCE status of zero,
but all informations of cb_sequenceres are zero too !!!
validate_seqid() return NFS4ERR_RETRY_UNCACHED_REP for a replay,
and skip the initlize cb_sequenceres.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Recent work in the pgio layer made it possible for there to be more than one
request per page. This caused a subtle change in commit behavior, because
write.c:nfs_commit_unstable_pages compares the number of *pages* waiting for
writeback against the number of requests on a commit list to choose when to
send a COMMIT in a non-blocking flush.
This is probably hard to hit in normal operation - you have to be using
rsize/wsize < PAGE_SIZE, or pnfs with lots of boundaries that are not page
aligned to have a noticeable change in behavior.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This code has been around for a while, but never was enabled, although
it is in a working shape.
Note that we implement NOTIFY_DEVICEID4_CHANGE identical to
NOTIFY_DEVICEID4_DELETE. Given that in either case we can't do anything
but preventing further lookups of a given device ID there isn't much difference
in semantics for the two. For the delete case the server MUST ensure that
there are no outstanding layouts, while for the change case it doesn't, but
that has little relevance to the client.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a layout driver keeps per-inode state outside of the layout segments it
needs to be notified of any layout returns or recalls on an inode, and not
just about the freeing of layout segments. Add a method to acomplish this,
which will allow the block layout driver to handle the case of truncated
and re-expanded files properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Expedite layout recall processing by forcing a layout commit when
we see busy segments. Without it the layout recall might have to wait
until the VM decided to start writeback for the file, which can introduce
long delays.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the filehandles match, but the igrab() fails, or the layout is
freed before we can get it, then just return NULL.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It is not sufficient to compare filehandles when we receive a layout
recall from the server; we also need to check that the layout stateids
match.
Reported-by: shaobingqing <shaobingqing@bwstor.com.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Clean up, since slot and sequence numbers are all unsigned anyway.
Among other things, squelch compiler warnings:
linux/fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’:
linux/fs/nfs/nfs4proc.c:703:2: warning: signed and unsigned type in
conditional expression [-Wsign-compare]
and
linux/fs/nfs/nfs4session.c: In function ‘nfs4_alloc_slot’:
linux/fs/nfs/nfs4session.c:151:31: warning: signed and unsigned type in
conditional expression [-Wsign-compare]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add tracepoints to nfs41_setup_sequence and nfs41_sequence_done
to track session and slot table state changes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set up tracepoints to track when delegations are set, reclaimed,
returned by the client, or recalled by the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* labeled-nfs:
NFS: Apply v4.1 capabilities to v4.2
NFS: Add in v4.2 callback operation
NFS: Make callbacks minor version generic
Kconfig: Add Kconfig entry for Labeled NFS V4 client
NFS: Extend NFS xattr handlers to accept the security namespace
NFS: Client implementation of Labeled-NFS
NFS: Add label lifecycle management
NFS:Add labels to client function prototypes
NFSv4: Extend fattr bitmaps to support all 3 words
NFSv4: Introduce new label structure
NFSv4: Add label recommended attribute and NFSv4 flags
NFSv4.2: Added NFS v4.2 support to the NFS client
SELinux: Add new labeling type native labels
LSM: Add flags field to security_sb_set_mnt_opts for in kernel mount data.
Security: Add Hook to test if the particular xattr is part of a MAC model.
Security: Add hook to calculate context based on a negative dentry.
NFS: Add NFSv4.2 protocol constants
Conflicts:
fs/nfs/nfs4proc.c
I found a few places that hardcode the minor version number rather than
making it dependent on the protocol the callback came in over. This
patch makes it easier to add new minor versions in the future.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
On a CB_RECALL the callback service thread flushes the inode using
filemap_flush prior to scheduling the state manager thread to return the
delegation. When pNFS is used and I/O has not yet gone to the data server
servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async
filemap_flush call, the LAYOUTGET must proceed to completion.
If the state manager starts to recover data while the inode flush is sending
the LAYOUTGET, a deadlock occurs as the callback service thread holds the
single callback session slot until the flushing is done which blocks the state
manager thread, and the state manager thread has set the session draining bit
which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot
table waitq.
Separate the draining of the back channel from the draining of the fore channel
by moving the NFS4_SESSION_DRAINING bit from session scope into the fore
and back slot tables. Drain the back channel first allowing the LAYOUTGET
call to proceed (and fail) so the callback service thread frees the callback
slot. Then proceed with draining the forechannel.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current code in pnfs_destroy_all_layouts() assumes that removing
the layout from the server->layouts list is sufficient to make it
invisible to other processes. This ignores the fact that most
users access the layout through the nfs_inode->layout...
There is further breakage due to lack of reference counting of the
layouts, meaning that the whole thing Oopses at the drop of a hat.
The code in initiate_bulk_draining() is almost correct, and can be
used as a model for pnfs_destroy_all_layouts(), so move that
code to pnfs.c, and refactor the code to allow us to choose between
a single filesystem bulk recall, and a recall of all layouts.
Also note that initiate_bulk_draining() currently calls iput() while
holding locks. Fix that too.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
RFC5661 requires us to make sure that the server knows we've updated
our slot table size by sending at least one SEQUENCE op containing the
new 'highest_slotid' value.
We can do so using the 'CHECK_LEASE' functionality of the state
manager.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The state manager no longer needs any special machinery to stop the
session flow and resize the slot table. It is all done on the fly by
the SEQUENCE op code now.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server wants to leave us with only one slot, or it wants
to "shrink" our slot table to something larger than we have now,
then so be it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Jeff Layton