[ Upstream commit e874557fce1b6023efafd523aee0c347bf7f1694 ]
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ebb44196585d3c9405fba1e409cf2312bca30ac ]
verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e874557fce1b ("selftests: mptcp: userspace_pm: fixed subtest names")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 277a0363120276645ae598d8d5fea7265e076ae9 ]
Commit 90c2d2eb7a ("MIPS: pci: lantiq: switch to using gpiod API") not
only switched to the gpiod API, but also inverted / changed the polarity
of the GPIO.
According to the PCI specification, the RST# pin is an active-low
signal. However, most of the device trees that have been widely used for
a long time (mainly in the openWrt project) define this GPIO as
active-high and the old driver code inverted the signal internally.
Apparently there are actually boards where the reset gpio must be
operated inverted. For this reason, we cannot use the GPIOD_OUT_LOW/HIGH
flag for initialization. Instead, we must explicitly set the gpio to
value 1 in order to take into account any "GPIO_ACTIVE_LOW" flag that
may have been set.
In order to remain compatible with all these existing device trees, we
should therefore keep the logic as it was before the commit.
Fixes: 90c2d2eb7a ("MIPS: pci: lantiq: switch to using gpiod API")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea4d4808e342ddf89ba24b93ffa2057005aaced ]
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b3 ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b4b1d1cec48ef4c26616c2fc4600b2c9fec05a ]
rk3328_pin_ctrl uses type of RK3288 which has a hack in
rockchip_pinctrl_suspend and rockchip_pinctrl_resume to restore GPIO6-C6
at assume, the hack is not applicable to RK3328 as GPIO6 is not even
exist in it. So use a dedicated pinctrl type to skip this hack.
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-4-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ef6914e0bf578357b4c906ffe6b26e7eedb8ccf ]
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8448a6c817c2aa6c6af785b1d45678bd5977e8d ]
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a767 ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adec57ff8e66aee632f3dd1f93787c13d112b7a1 ]
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 42fed7ba44 ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604085838.3344-1-hagarhem@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f0fad0382124e7e23b3c730fa78818c22c89c0a ]
The caller of this function treats all non-zero values as an error, so
the return value of i2c_master_recv() cannot be returned directly.
This fixes touch reporting when there are more than 6 active touches.
Fixes: ef536abd3a ("Input: ili210x - define and use chip operations structure")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240523085624.2295988-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bdf8a42bca4f47646fd105a387ab6926948c7f1 ]
It is possible that also the GET_ERROR command fails. If
that happens, the command completion still needs to be
acknowledged. Otherwise the interface will be stuck until
it's reset.
Reported-by: Ammy Yi <ammy.yi@intel.com>
Fixes: bdc62f2bae ("usb: typec: ucsi: Simplified registration and I/O API")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531104653.1303519-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de52aca4d9d56c3b2f00b638d457075914b1a227 ]
Some PPM implementation do not like UCSI_ACK_CONNECTOR_CHANGE
without UCSI_ACK_COMMAND_COMPLETE. Moreover, doing this is racy
as it requires sending two UCSI_ACK_CC_CI commands in a row and
the second one will be started with UCSI_CCI_ACK_COMPLETE already
set in CCI.
Bundle the UCSI_ACK_CONNECTOR_CHANGE with the UCSI_ACK_COMMAND_COMPLETE
for the UCSI_GET_CONNECTOR_STATUS command that is sent while
handling a connector change event.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240327224554.1772525-3-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8bdf8a42bca4 ("usb: typec: ucsi: Ack also failed Get Error commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 14d7c92f8df9c0964ae6f8b813c1b3ac38120825 upstream.
This reverts commit 3afb76a66b5559a7b595155803ce23801558a7a9.
This was a wrongheaded workaround for an issue that had already been
fixed much better by commit 4ef9ad19e176 ("mm: huge_memory: don't force
huge page alignment on 32 bit").
Asking users questions at kernel compile time that they can't make sense
of is not a viable strategy. And the fact that even the kernel VM
maintainers apparently didn't catch that this "fix" is not a fix any
more pretty much proves the point that people can't be expected to
understand the implications of the question.
It may well be the case that we could improve things further, and that
__thp_get_unmapped_area() should take the mapping randomization into
account even for 64-bit kernels. Maybe we should not be so eager to use
THP mappings.
But in no case should this be a kernel config option.
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89e1ee118d6f0ee6bd6e80d8fe08839875daa241 upstream.
syzbot reported a potential read out of bounds in asus_report_fixup.
this patch adds checks so that a read out of bounds will not occur
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reported-by: <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c
Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked")
Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b377b4868ef17b040065bd468668c707d2477a5 upstream.
Commit 1a7d0890dd4a ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.
Gcc seems to let it slide, but clang notices with the appropriate error:
kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
1140 | void kprobe_ftrace_kill()
| ^
| void
but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.
Fixes: 1a7d0890dd4a kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bab4cfd7c1560095e29919e2ebe01783b9096dc upstream.
Two independent GitHub PRs let to the addition of one quirk after it
was removed..
Fixes: b10cb955c6c0 ("ASoC: Intel: sof_sdw: add quirk for Dell SKU 0C0F")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152123.36284-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2703a3596a279b0be6eeed4c500bdbaa8dc3ce4 upstream.
why and how:
causes black screen on PNP on DCN 3.5
This reverts commit f30a3bea92bd ("drm/amd/display: Exit idle
optimizations before HDCP execution")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit beb2800074c15362cf9f6c7301120910046d6556 ]
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.
However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.
Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.
BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 174a0c565cea74a7811ff79fbee1b70247570ade ]
The use of the 'kernel_offset' variable to position the image file that
has been loaded by UEFI or GRUB is unnecessary, because we can directly
position the loaded image file through using the image_base field of the
efi_loaded_image struct provided by UEFI.
Replace kernel_offset with image_base to position the image file that has
been loaded by UEFI or GRUB.
Signed-off-by: Wang Yao <wangyao@lemote.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Stable-dep-of: beb2800074c1 ("LoongArch: Fix entry point in kernel image header")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a736ddfc861b2a217c935c2f461a8004add8247 ]
On non-x86 architectures, the screen_info variable is generally only
used for the VGA console where supported, and in some cases the EFI
framebuffer or vga16fb.
Now that we have a definite list of which architectures actually use it
for what, use consistent #ifdef checks so the global variable is only
defined when it is actually used on those architectures.
Loongarch and riscv have no support for vgacon or vga16fb, but
they support EFI firmware, so only that needs to be checked, and the
initialization can be removed because that is handled by EFI.
IA64 has both vgacon and EFI, though EFI apparently never uses
a framebuffer here.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: beb2800074c1 ("LoongArch: Fix entry point in kernel image header")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c67ddf59ac44adc60649730bf8347e37c516b001 ]
debug_pagealloc is a debug feature which clears the valid bit in page table
entry for freed pages to detect illegal accesses to freed memory.
For this feature to work, virtual mapping must have PAGE_SIZE resolution.
(No, we cannot map with huge pages and split them only when needed; because
pages can be allocated/freed in atomic context and page splitting cannot be
done in atomic context)
Force linear mapping to use small pages if debug_pagealloc is enabled.
Note that it is not necessary to force the entire linear mapping, but only
those that are given to memory allocator. Some parts of memory can keep
using huge page mapping (for example, kernel's executable code). But these
parts are minority, so keep it simple. This is just a debug feature, some
extra overhead should be acceptable.
Fixes: 5fde3db5eb ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/2e391fa6c6f9b3fcf1b41cefbace02ee4ab4bf59.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 629db01c64ff6cea08fc61b52426362689ef8618 ]
Propagating changes at this level is cumbersome as we need to go through
all the page tables when that happens (either when changing the
permissions or when splitting the mapping).
Note that this prevents the use of 4MB mapping for sv32 and 1GB mapping for
sv39 in the linear mapping.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: c67ddf59ac44 ("riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93022482b2948a9a7e9b5a2bb685f2e1cb4c3348 ]
Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
to:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration. The new code
did not match any rules.
Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
while the new code expands to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
Looking at the code for x86_match_cpu():
const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
{
const struct x86_cpu_id *m;
struct cpuinfo_x86 *c = &boot_cpu_data;
for (m = match;
m->vendor | m->family | m->model | m->steppings | m->feature;
m++) {
...
}
return NULL;
it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).
So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.
Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.
Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.
However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")
Fixes: 644e9cbbe3 ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6dfdc2e89a0adedf455814c91b977d6a584cc88 ]
To avoid adding a slew of new macros for each new Intel CPU family
switch over from providing CPU model number #defines to a new
scheme that encodes vendor, family, and model in a single number.
[ bp: s/casted/cast/g ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-3-tony.luck@intel.com
Stable-dep-of: 93022482b294 ("x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56d4b633fffea9510db468085bed0799cba4ecd ]
Both nbd_send_cmd() and nbd_handle_cmd() return either a negative error
number or a positive blk_status_t value. nbd_queue_rq() converts these
return values into a blk_status_t value. There is a bug in the conversion
code: if nbd_send_cmd() returns BLK_STS_RESOURCE, nbd_queue_rq() should
return BLK_STS_RESOURCE instead of BLK_STS_OK. Fix this, move the
conversion code into nbd_handle_cmd() and fix the remaining sparse warnings.
This patch fixes the following sparse warnings:
drivers/block/nbd.c:673:32: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:673:32: expected int
drivers/block/nbd.c:673:32: got restricted blk_status_t [usertype]
drivers/block/nbd.c:714:48: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:714:48: expected int
drivers/block/nbd.c:714:48: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1120:21: warning: incorrect type in assignment (different base types)
drivers/block/nbd.c:1120:21: expected int [assigned] ret
drivers/block/nbd.c:1120:21: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1125:16: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:1125:16: expected restricted blk_status_t
drivers/block/nbd.c:1125:16: got int [assigned] ret
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Fixes: fc17b6534e ("blk-mq: switch ->queue_rq return value to blk_status_t")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240510202313.25209-6-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a6751e052ab4789630bc889c814037068723bc1 ]
Document locking assumptions with lockdep_assert_held() instead of source
code comments. The advantage of lockdep_assert_held() is that it is
verified at runtime if lockdep is enabled in the kernel config.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240510202313.25209-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: e56d4b633fff ("nbd: Fix signal handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c40984eeb8804cffcd28640f427f4fe829243fc ]
transaction id should be updated in ocfs2_unlink and ocfs2_link.
Otherwise, inode link will be wrong after journal replay even fsync was
called before power failure:
=======================================================================
$ touch testdir/bar
$ ln testdir/bar testdir/bar_link
$ fsync testdir/bar
$ stat -c %h $SCRATCH_MNT/testdir/bar
1
$ stat -c %h $SCRATCH_MNT/testdir/bar
1
=======================================================================
Link: https://lkml.kernel.org/r/20240408082041.20925-4-glass.su@suse.com
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd6acbbc4d1edb218ade7ac0ab1839f9e4fcd094 ]
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-54-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 8c40984eeb88 ("ocfs2: update inode fsync transaction id in ocfs2_unlink and ocfs2_link")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbfbb4ddbc8503478e0a138f9a31f61686cc5f11 ]
In order to connect to networks which require 802.11w, add the
MFP_CAPABLE flag and let mac80211 do the actual crypto in software.
When a robust management frame is received, rx_dec->swdec is not set,
even though the HW did not decrypt it. Extend the check and don't set
RX_FLAG_DECRYPTED for these frames in order to use SW decryption.
Use the security flag in the RX descriptor for this purpose, like it is
done in the rtw88 driver.
Cc: stable@vger.kernel.org
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240418071813.1883174-3-martin.kaistra@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4a98b45fbe6d06f4b79ed90d0bb05ced8674c23 ]
The trace could be misleading if trace errors are not taken into
account, so display them also by adding the itrace "e" option.
Note --call-trace and --call-ret-trace already add the itrace "e"
option.
Fixes: b585ebdb59 ("perf script: Add --insn-trace for instruction decoding")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315071334.3478-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63deee52811b2f84ed2da55ad47252f0e8145d62 upstream.
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630 ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfd239a039b3581ca25f932e66b6e2c2bf77c798 upstream.
The gpio in "reg_usdhc2_vmmc" should be 7 instead of 19.
Cc: stable@vger.kernel.org
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2bd0791c5f02e964402624dfff45ca8995f5397 upstream.
Misplaced parenthesis make test of mode wrong in case mode is equal to
SPI_TX_OCTAL or SPI_RX_OCTAL.
Simplify this sanity test, if one of this bit is set, property
cs-gpio must be present in DT.
Fixes: a557fca630 ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c8cfd592bb7632200b4edac8f2c7ec892ed9d81 upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a6 ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4e001ffeccfc128c715057e866f301ac9b95728 upstream.
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a72477273066b5b357801ab2d315ef14949d402 upstream.
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.
Sometimes it causes failure for the very first message transfer, that is
usually a device probe.
Hence, set IACK bit after core is enabled to clear pending interrupt.
Fixes: 18f98b1e31 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bb592c2eca8fd2bc06db7d80b38da18da4a2f43 upstream.
Not all pages may apply to pgtable check. One example is ZONE_DEVICE
pages: they map PFNs directly, and they don't allocate page_ext at all
even if there's struct page around. One may reference
devm_memremap_pages().
When both ZONE_DEVICE and page-table-check enabled, then try to map some
dax memories, one can trigger kernel bug constantly now when the kernel
was trying to inject some pfn maps on the dax device:
kernel BUG at mm/page_table_check.c:55!
While it's pretty legal to use set_pxx_at() for ZONE_DEVICE pages for page
fault resolutions, skip all the checks if page_ext doesn't even exist in
pgtable checker, which applies to ZONE_DEVICE but maybe more.
Link: https://lkml.kernel.org/r/20240605212146.994486-1-peterx@redhat.com
Fixes: df4e817b71 ("mm: page table check")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e046bb111f13461d3f9331e24e974324245140e upstream.
Some applications were reporting ETIMEDOUT errors on apparently
good looking flows, according to packet dumps.
We were able to root cause the issue to an accidental setting
of tp->retrans_stamp in the following scenario:
- client sends TFO SYN with data.
- server has TFO disabled, ACKs only SYN but not payload.
- client receives SYNACK covering only SYN.
- tcp_ack() eats SYN and sets tp->retrans_stamp to 0.
- tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue()
to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now",
but we are not in any loss recovery state.
- TFO payload is ACKed.
- we are not in any loss recovery state, and don't see any dupacks,
so we don't get to any code path that clears tp->retrans_stamp.
- tp->retrans_stamp stays non-zero for the lifetime of the connection.
- after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO
to 1 jiffy due to bogus tp->retrans_stamp.
- on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out()
sets start_ts from tp->retrans_stamp from TFO payload retransmit
hours/days ago, and computes bogus long elapsed time for loss recovery,
and suffers ETIMEDOUT early.
Fixes: a7abf3cd76 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
CC: stable@vger.kernel.org
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614130615.396837-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3afb76a66b5559a7b595155803ce23801558a7a9 upstream.
An ASLR regression was noticed [1] and tracked down to file-mapped areas
being backed by THP in recent kernels. The 21-bit alignment constraint
for such mappings reduces the entropy for randomizing the placement of
64-bit library mappings and breaks ASLR completely for 32-bit libraries.
The reported issue is easily addressed by increasing vm.mmap_rnd_bits and
vm.mmap_rnd_compat_bits. This patch just provides a simple way to set
ARCH_MMAP_RND_BITS and ARCH_MMAP_RND_COMPAT_BITS to their maximum values
allowed by the architecture at build time.
[1] https://zolutal.github.io/aslrnt/
[akpm@linux-foundation.org: default to `y' if 32-bit, per Rafael]
Link: https://lkml.kernel.org/r/20240606180622.102099-1-aquini@redhat.com
Fixes: 1854bc6e24 ("mm/readahead: Align file mappings for non-DAX")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c94512055f362dd789e0f87b8566feeddec83c9 upstream.
This reverts commit d9666dfb31.
The container of the struct dw8250_port_data is private to the actual
driver. In particular, 8250_lpss and 8250_dw use different data types
that are assigned to the UART port private_data. Hence, it must not
be used outside the specific driver.
Fix the mistake made in the past by moving the respective definitions
to the specific driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240514190730.2787071-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75dde792d6f6c2d0af50278bd374bf0c512fe196 upstream.
The logic in __efi_memmap_init() is shared between two different
execution flows:
- mapping the EFI memory map early or late into the kernel VA space, so
that its entries can be accessed;
- the x86 specific cloning of the EFI memory map in order to insert new
entries that are created as a result of making a memory reservation
via a call to efi_mem_reserve().
In the former case, the underlying memory containing the kernel's view
of the EFI memory map (which may be heavily modified by the kernel
itself on x86) is not modified at all, and the only thing that changes
is the virtual mapping of this memory, which is different between early
and late boot.
In the latter case, an entirely new allocation is created that carries a
new, updated version of the kernel's view of the EFI memory map. When
installing this new version, the old version will no longer be
referenced, and if the memory was allocated by the kernel, it will leak
unless it gets freed.
The logic that implements this freeing currently lives on the code path
that is shared between these two use cases, but it should only apply to
the latter. So move it to the correct spot.
While at it, drop the dummy definition for non-x86 architectures, as
that is no longer needed.
Cc: <stable@vger.kernel.org>
Fixes: f0ef652347 ("efi: Fix efi_memmap_alloc() leaks")
Tested-by: Ashish Kalra <Ashish.Kalra@amd.com>
Link: https://lore.kernel.org/all/36ad5079-4326-45ed-85f6-928ff76483d3@amd.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01c8f9806bde438ca1c8cbbc439f0a14a6694f6c upstream.
In kcov_remote_start()/kcov_remote_stop(), we swap the previous KCOV
metadata of the current task into a per-CPU variable. However, the
kcov_mode_enabled(mode) check is not sufficient in the case of remote KCOV
coverage: current->kcov_mode always remains KCOV_MODE_DISABLED for remote
KCOV objects.
If the original task that has invoked the KCOV_REMOTE_ENABLE ioctl happens
to get interrupted and kcov_remote_start() is called, it ultimately leads
to kcov_remote_stop() NOT restoring the original KCOV reference. So when
the task exits, all registered remote KCOV handles remain active forever.
The most uncomfortable effect (at least for syzkaller) is that the bug
prevents the reuse of the same /sys/kernel/debug/kcov descriptor. If
we obtain it in the parent process and then e.g. drop some
capabilities and continuously fork to execute individual programs, at
some point current->kcov of the forked process is lost,
kcov_task_exit() takes no action, and all KCOV_REMOTE_ENABLE ioctls
calls from subsequent forks fail.
And, yes, the efficiency is also affected if we keep on losing remote
kcov objects.
a) kcov_remote_map keeps on growing forever.
b) (If I'm not mistaken), we're also not freeing the memory referenced
by kcov->area.
Fix it by introducing a special kcov_mode that is assigned to the task
that owns a KCOV remote object. It makes kcov_mode_enabled() return true
and yet does not trigger coverage collection in __sanitizer_cov_trace_pc()
and write_comp_data().
[nogikh@google.com: replace WRITE_ONCE() with an ordinary assignment]
Link: https://lkml.kernel.org/r/20240614171221.2837584-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20240611133229.527822-1-nogikh@google.com
Fixes: 5ff3b30ab5 ("kcov: collect coverage from interrupts")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1558bc57b8e5b4da5d821537cd30e2e660861d8 upstream.
Using gcov on kernels compiled with GCC 14 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 14.
Tested with GCC versions 14.1.0 and 13.2.0.
Link: https://lkml.kernel.org/r/20240610092743.1609845-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 685d03c3795378fca6a1b3d43581f7f1a3fc095f upstream.
bdev->bd_super has been removed and commit 8887b94d93 change the usage
from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set
bh->b_assoc_map, it will trigger NULL pointer dereference when calling
into ocfs2_abort_trigger().
Actually this was pointed out in history, see commit 74e364ad1b. But
I've made a mistake when reviewing commit 8887b94d93 and then
re-introduce this regression.
Since we cannot revive bdev in buffer head, so fix this issue by
initializing all types of ocfs2 triggers when fill super, and then get the
specific ocfs2 trigger from ocfs2_caching_info when access journal.
[joseph.qi@linux.alibaba.com: v2]
Link: https://lkml.kernel.org/r/20240602112045.1112708-1-joseph.qi@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240530110630.3933832-2-joseph.qi@linux.alibaba.com
Fixes: 8887b94d93 ("ocfs2: stop using bdev->bd_super for journal error logging")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts (NGI0)