Unlike most other power button drivers, this driver unconditionally
enables its wakeup IRQ. It should be using device_may_wakeup() to
respect the userspace configuration of wakeup sources.
Because the AXP20x MFD device uses regmap-irq, the AXP20x PEK IRQs are
nested off of regmap-irq's threaded interrupt handler. The device core
ignores such interrupts, so to actually disable wakeup, we must
explicitly disable all non-wakeup interrupts during suspend.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115051253.32603-2-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20191210141103.15910-1-alexandru.ardelean@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted
to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.
Fixes: d4c7c5c96c ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: 99f83c9c9a ("[PATCH] USB: add driver for Keyspan Digital Remote")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org> # 2.6.13
Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the onkey driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The F54 Report Data is apparently read through a fifo and for
the smbus protocol that means that between reading a block of 32
bytes the rmiaddr shouldn't be incremented. However, changing
that causes other non-fifo reads to fail and so that change was
reverted.
This patch changes just the F54 function and it now reads 32 bytes
at a time from the fifo, using the F54_FIFO_OFFSET to update the
start address that is used when reading from the fifo.
This has only been tested with smbus, not with i2c or spi. But I
suspect that the same is needed there since I think similar
problems will occur there when reading more than 256 bytes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Timo Kaufmann <timokau@zoho.com>
Link: https://lore.kernel.org/r/20200115124819.3191024-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit a284e11c37.
This causes problems (drifting cursor) with at least the F11 function that
reads more than 32 bytes.
The real issue is in the F54 driver, and so this should be fixed there, and
not in rmi_smbus.c.
So first revert this bad commit, then fix the real problem in F54 in another
patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Timo Kaufmann <timokau@zoho.com>
Fixes: a284e11c37 ("Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200115124819.3191024-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
Lm0mvE8=
=NECs
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rc5' into next
Sync up with mainline to get SPI "delay" API changes.
We do not have to handle the wake-irq within the driver because the pm
core can handle this for us. The only use case for the suspend/resume
callbacks was to handle the wake-irq so we can remove the callbacks.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since day one the touch controller acts as wakeup-source. This seems to
be wrong since the device supports deep-sleep mechanism [1] which
requires a reset to leave it. Also some designs won't use the
touchscreen as wakeup-source.
According discussion [2] we decided to break backward compatibility and
go the common way by using the 'wakeup-source' device-property.
[1] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x26.pdf
[2] https://patchwork.kernel.org/patch/11149037/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It seems that the include order is historical increased and no one takes
care of it. Fix this to align it with the common rule to be in a
alphabetical order.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The EP0700MLP1 returns bogus data on the first register read access
(reading the threshold parameter from register 0x00):
edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40
It ignores writes until then. This patch adds a dummy read after which
the number of sensors and parameter read/writes work correctly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: bdb5c57f20 ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Drop the second, redundant reinitialisation of the endpoint-descriptor
pointer from probe.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-7-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make sure to use the current altsetting when printing size of any extra
descriptors of the interface.
Also fix the s/endpoint/interface/ mixup in the message itself.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-6-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 162f98dea4 ("Input: gtco - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-5-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make sure to always use the descriptors of the current alternate setting
to avoid future issues when accessing fields that may differ between
settings.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-4-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 8e20cf2bce ("Input: aiptek - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could be used by a
malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer
dereference.
Fixes: 1afca2b66a ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Link: https://lore.kernel.org/r/20191210113737.4016-2-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver misses a check for devm_thermal_zone_of_sensor_register().
Add a check to fix it.
Fixes: e28d0c9cd3 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We observed a large(order-3) allocation in evdev_open() and it may
cause an OOM kernel panic in kzalloc(), before we getting to the
vzalloc() fallback.
Fix it by converting kzalloc()/vzalloc() to kvzalloc() to avoid the
OOM killer logic as we have a vmalloc fallback.
InputReader invoked oom-killer: gfp_mask=0x240c2c0
(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO), nodemask=0, order=3,
oom_score_adj=-900
...
(dump_backtrace) from (show_stack+0x18/0x1c)
(show_stack) from (dump_stack+0x94/0xa8)
(dump_stack) from (dump_header+0x7c/0xe4)
(dump_header) from (out_of_memory+0x334/0x348)
(out_of_memory) from (__alloc_pages_nodemask+0xe9c/0xeb8)
(__alloc_pages_nodemask) from (kmalloc_order_trace+0x34/0x128)
(kmalloc_order_trace) from (__kmalloc+0x258/0x36c)
(__kmalloc) from (evdev_open+0x5c/0x17c)
(evdev_open) from (chrdev_open+0x100/0x204)
(chrdev_open) from (do_dentry_open+0x21c/0x354)
(do_dentry_open) from (vfs_open+0x58/0x84)
(vfs_open) from (path_openat+0x640/0xc98)
(path_openat) from (do_filp_open+0x78/0x11c)
(do_filp_open) from (do_sys_open+0x130/0x244)
(do_sys_open) from (SyS_openat+0x14/0x18)
(SyS_openat) from (__sys_trace_return+0x0/0x10)
...
Normal: 12488*4kB (UMEH) 6984*8kB (UMEH) 2101*16kB (UMEH) 0*32kB
0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 139440kB
HighMem: 206*4kB (H) 131*8kB (H) 42*16kB (H) 2*32kB (H) 0*64kB
0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB
...
Kernel panic - not syncing: Out of memory and no killable processes...
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov:
"Just a few small fixups here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_sc_key - only take the valid data from SCU firmware as key state
Input: add safety guards to input_set_keycode()
Input: input_event - fix struct padding on sparc64
Input: uinput - always report EPOLLOUT
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The two device attrbitues are not declared outside this file
so make them static to avoid the following warnings:
drivers/input/misc/axp20x-pek.c:194:1: warning: symbol 'dev_attr_startup' was not declared. Should it be static?
drivers/input/misc/axp20x-pek.c:195:1: warning: symbol 'dev_attr_shutdown' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20191217152541.2167080-1-ben.dooks@codethink.co.uk
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When reading key state from SCU, the response data from SCU firmware
is 4 bytes due to MU message protocol, but ONLY the first byte is the
key state, other 3 bytes could be some dirty data, so we should ONLY
take the first byte as key state to avoid reporting incorrect state.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: 688f1dfb69 ("Input: keyboard - imx_sc: Add i.MX system controller key support")
Link: https://lore.kernel.org/r/1576202909-1661-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Going through all uses of timeval, I noticed that we screwed up
input_event in the previous attempts to fix it:
The time fields now match between kernel and user space, but all following
fields are in the wrong place.
Add the required padding that is implied by the glibc timeval definition
to fix the layout, and use a struct initializer to avoid leaking kernel
stack data.
Fixes: 141e5dcaa7 ("Input: input_event - fix the CONFIG_SPARC64 mixup")
Fixes: 2e746942eb ("Input: input_event - provide override for sparc64")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191213204936.3643476-2-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
uinput device is always available for writing so we should always report
EPOLLOUT and EPOLLWRNORM bits, not only when there is nothing to read from
the device.
Fixes: d4b675e1b5 ("Input: uinput - fix returning EPOLLOUT from uinput_poll")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20191209202254.GA107567@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To avoid flashing incompatible firmware onto a device we should check
whether "Remark ID" in firmware matches with the one in the controller.
This function is supported by Elan's latest version of boot code, so the
driver decides whether to perform the check based on the boot code version.
Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Link: https://lore.kernel.org/r/00a901d5af3c$193e9cd0$4bbbd670$@emc.com.tw
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more input updates from Dmitry Torokhov:
- fixups for Synaptics RMI4 driver
- a quirk for Goodinx touchscreen on Teclast tablet
- a new keycode definition for activating privacy screen feature found
on a few "enterprise" laptops
- updates to snvs_pwrkey driver
- polling uinput device for writing (which is always allowed) now works
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
Input: goodix - add upside-down quirk for Teclast X89 tablet
Input: add privacy screen toggle keycode
Input: uinput - fix returning EPOLLOUT from uinput_poll
Input: snvs_pwrkey - remove gratuitous NULL initializers
Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.
The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.
I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.
It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.
With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.
The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.
Fixes: 363c53875a (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Gratuitous NULL initializers rarely help and often prevent compiler
from warning about using uninitialized variable. Let's remove them.
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/20191125211407.GA97812@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* CrOS EC / MFD / IIO
- Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part of a
series from Gwendal to refactor sensor code between MFD, CrOS EC, iio
and input in order to add a new sensorhub driver and FIFO processing
* Wilco EC:
- Add support for Dell's USB PowerShare policy control, keyboard
backlight LED driver, and a new test_event file.
- Fixes use after free in wilco_ec's telemetry driver.
* Misc:
- bugfix in cros_usbpd_logger (missing destroy workqueue).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXeaqtwAKCRBzbaomhzOw
wilIAQCQ3/dpAwg2skKYYf3RBLDJeDLA1id7rNSgMOXc2aKyTAD/fCQtNhwj+Hal
W//04WWngTCQF5fkE9OCJrDwbm5eRwc=
=uOGe
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform changes from Benson Leung:
"CrOS EC / MFD / IIO:
- Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
of a series from Gwendal to refactor sensor code between MFD, CrOS
EC, iio and input in order to add a new sensorhub driver and FIFO
processing
Wilco EC:
- Add support for Dell's USB PowerShare policy control, keyboard
backlight LED driver, and a new test_event file.
- Fixes use after free in wilco_ec's telemetry driver.
Misc:
- bugfix in cros_usbpd_logger (missing destroy workqueue)"
* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: wilco_ec: fix use after free issue
platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
Revert "Input: cros_ec_keyb - add back missing mask for event_type"
platform/chrome: cros_ec: handle MKBP more events flag
platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
platform/chrome: cros-ec: Record event timestamp in the hard irq
mfd / platform / iio: cros_ec: Register sensor through sensorhub
iio / platform: cros_ec: Add cros-ec-sensorhub driver
mfd / platform: cros_ec: Add sensor_count and make check_features public
platform/chrome: cros_ec: Put docs with the code
platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
platform/chrome: cros_ec: Fix Kconfig indentation
platform/chrome: wilco_ec: Add keyboard backlight LED support
platform/chrome: wilco_ec: Add charging config driver
platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
platform/chrome: wilco_ec: Add debugfs test_event file
The first generation i.MX6 processors does not send an interrupt when the
power key is pressed. It sends a power down request interrupt if the key is
released before a hard shutdown (5 second press). This should allow
software to bring down the SoC safely.
For this driver to work as a regular power key with the older SoCs, we need
to send a keypress AND release when we get the power down request irq.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Link: https://lore.kernel.org/r/20191125161210.8275-1-robin@protonic.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The v4l2-compliance utility reported several V4L2 API compliance
issues:
- the sequence counter wasn't filled in
- the sequence counter wasn't reset to 0 at the start of streaming
- the returned field value wasn't set to V4L2_FIELD_NONE
- the timestamp wasn't set
- the payload size was undefined if an error was returned
- min_buffers_needed doesn't need to be initialized
Fix these issues.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de
Link: https://lore.kernel.org/r/20191119105118.54285-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1574306373-29581-1-git-send-email-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.
Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.
Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit d096aa3eb6.
This patch is not needed anymore since we clear EC_MKBP_HAS_MORE_EVENTS
flag before calling the notifiers in patch
"9d9518f5b52a (platform: chrome: cros_ec: handle MKBP more events flag)"
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This reverts commit 62c3801619.
This patch is not needed anymore since we clear EC_MKBP_HAS_MORE_EVENTS
flag before calling the notifiers in patch
"9d9518f5b52a (platform: chrome: cros_ec: handle MKBP more events flag)"
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Just got one of these for debugging some unrelated issues, and noticed
that Lenovo seems to have gone back to using RMI4 over smbus with
Synaptics touchpads on some of their new systems, particularly this one.
So, let's enable RMI mode for the X1 Extreme 2nd Generation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191115221814.31903-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver forgets to destroy workqueue in remove() similarly to what is
done when probe() fails. Add a call to destroy_workqueue() to fix it.
Since unregistration will wait for the work to finish, we do not need to
cancel/flush the work instance in remove().
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191114023405.31477-1-hslester96@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The device md->input is used after it is released. Setting the device
data to NULL is unnecessary as the device is never used again. Instead,
md->input should be assigned NULL to avoid accessing the freed memory
accidently. Besides, checking md->si against NULL is superfluous as it
points to a variable address, which cannot be NULL.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver for F54 just polls the status and doesn't even have a IRQ
handler registered. Make sure to disable all F54 IRQs, so we don't crash
the kernel on a nonexistent handler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191105114402.6009-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Only show the 'calibrate' sysfs attribute on chip flavours
which support calibration by writing to a calibration register.
Do this by adding a flag to the chip operations structure.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20191112210148.3535-2-TheSven73@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Optionally allow the touch screen resolution to be set by adding
it to the chip operations structure. If it is omitted (left zero),
the resolution defaults to 64K. Which is the previously hard-coded
value.
Set the ili2117 resolution to 2048, as indicated in its datasheet.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20191112210148.3535-1-TheSven73@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver's method to retrieve the firmware version on ili2117/
ili2118 chip flavours is incorrect. The firmware version register
address and layout are wrong.
The firmware version is not actually used anywhere inside or
outside this driver. There is a dev_dbg() print, but that is
only visible when the developer explicitly compiles in debug
support.
Don't make the code more complicated to preserve a feature that
no-one is using. Remove all code associated with chip firmware
version.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20191112164429.11225-1-TheSven73@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
device_get_match_data is available now, so we can replace the call
to of_device_get_match_data and remove the FIXME comment.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20191007203343.101466-2-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When I2C client is instantiated with I2C_CLIENT_WAKE flag (either via
"wakeup-source" device property, or via board info flag), it will mark the
main IRQ line as wakeup IRQ, which will ensure that it will be enabled for
wakeup when system transitions to suspend state. Since our suspend/resume
handlers were only managing IRQ wakeup state, they are no longer needed,
and can be removed.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I2C devices that are supposed to be wakeup sources should be instantiated
with I2C_CLIENT_WAKE flag (which can be either set by in board info, or
retrieved from "wakeup-source" property); individual drivers should not be
marking devices as wakeup sources unconditionally.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of doing if/else if/else on the chip's model number let's define
chip operations structure and use it to perform indirect calls. With number
of protocols supported by the driver growing, this makes it better
maintainable.
This change includes fixes to checks whether the driver should continue
polling the controller by Sven Van Asbroeck <thesven73@gmail.com>.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We are using devm_input_allocate_device() that set's up the parent for
us, no need to do it ourselves.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_init_slots() may fail and we need to handle such failures.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's switch the driver to using threaded IRQ so that we do not need to
manage the interrupt and work separately, and we do not acknowledge
interrupt until we finished handling it completely.
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Tested-by: Marek Vasut <marex@denx.de> # ILI2117
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for ILI2117 touch controller. This controller is similar
to the ILI210x and ILI251x, except for the following differences:
- Reading out of touch data must happen at most 300 mS after the
interrupt line was asserted. No command must be sent, the data
are returned upon pure I2C read of 43 bytes long.
- Supports 10 simultaneous touch inputs.
- Touch data format is slightly different.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org> # for DT binding
Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The body of the for loop is only ever run once as the second standard_report
element is never changed from its initial zero init, so the loop condition is
never satisfies after the first run. Equally the start member of the first
element is never changed from 0, so the index offset is always a constant 0.
Remove this needless obfuscation of the code and write it in a straight
forward manner.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191104114454.10500-3-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently, rmi_f11_attention() and rmi_f12_attention() functions update
the attn_data data pointer and size based on the size of the expected
size of the attention data. However, if the actual valid data in the
attn buffer is less then the expected value then the updated data
pointer will point to memory beyond the end of the attn buffer. Using
the calculated valid_bytes instead will prevent this from happening.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-3-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch fixes an issue seen on HID touchpads which report finger
positions using RMI4 Function 12. The issue manifests itself as
spurious button presses as described in:
https://www.spinics.net/lists/linux-input/msg58618.html
Commit 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution
to irq_domain") switched the RMI4 driver to using an irq_domain to handle
RMI4 function interrupts. Functions with more then one interrupt now have
each interrupt mapped to their own IRQ and IRQ handler. The result of
this change is that the F12 IRQ handler was now getting called twice. Once
for the absolute data interrupt and once for the relative data interrupt.
For HID devices, calling rmi_f12_attention() a second time causes the
attn_data data pointer and size to be set incorrectly. When the touchpad
button is pressed, F30 will generate an interrupt and attempt to read the
F30 data from the invalid attn_data data pointer and report incorrect
button events.
This patch disables the F12 relative interrupt which prevents
rmi_f12_attention() from being called twice.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Simon Wood <simon@mungewell.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The video buffer used by the queue is a vb2_v4l2_buffer, not a plain
vb2_buffer. Using the wrong type causes the allocation of the buffer
storage to be too small, causing a out of bounds write when
__init_vb2_v4l2_buffer initializes the buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191104114454.10500-1-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts kxtj9 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
note that with regular input devices handling polling, there is no longer a
benefit in having separate INPUT_KXTJ9_POLLED_MODE config option.
Link: https://lore.kernel.org/r/20191017204217.106453-23-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts bma150 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver can be cleaned up by using managed resource helpers.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
[dtor: do not explicitly set parent of input device since we are using devm]
Link: https://lore.kernel.org/r/20191017204217.106453-20-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts mma8450 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts gpio_decoder driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts rb532_button driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts sgi_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-15-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts cobalt_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-13-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts wistron_btns driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-11-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts apanel driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
While at it, let's convert the driver to use devm.
Link: https://lore.kernel.org/r/20191017204217.106453-10-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts gpio_keys_polled driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Note that we still keep polled and non-polled gpio-keys drivers separate,
as they are different enough and mixing them up would make the code pretty
confusing.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts jornada680_kbd driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts clps711x-keypad driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Also use managed API when allocating input device, this allows us to remove
clps711x_keypad_remove() method.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts adc-keys driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20191017204217.106453-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts tsc6507x-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts ts4800-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts sur40 driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts raspberrypi-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts psxpad-spi driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org> # bindings
Link: https://lore.kernel.org/r/20191029005806.3577376-2-megous@megous.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch the driver to the slotted variant of multitouch protocol (MT-B)
with in-kernel tracking of the contacts.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The receiving buffer is allocated separately from the main driver
data structure, and is naturally DMA-safe, so mark it as such when
building I2C transfer message.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The finger structure size is quite small and allocating it together with
the main driver structure will not increase likelyhood of allocation
failing, but reduces number of objects needing to be tracked by the
allocator and devm.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should not be putting the chip into reset while interrupts are enabled
and ISR may be running. Fix this by installing a custom devm action and
powering off the device/resetting GPIO line from there. This ensures proper
ordering.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When I2C client is created with I2C_CLIENT_WAKE flag (which happens
either because we have "wakeup-source" device property or the flag
was passed in when creating an I2C client manually), I2C core will
take care of configuring interrupt as wakeup source on suspend.
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not unconditionally configure the touchscreen as wakeup source but
rather rely on I2C core to do that when requested (either via
"wakeup-source" device property, or when creating a client with
I2C_CLIENT_WAKE flag).
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Avoid complex 2-variable loop when parsing touchscreen data to make the
code clearer.
Acked-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no gpio functions used in the driver that is exported
by the gpio.h header, so remove this unneeded header.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20191026185958.24158-3-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is no gpio functions used in the driver that is exported
by the gpio.h header, so remove this unneeded header.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20191026185958.24158-2-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchscreen device is a GPIO consumer, not a GPIO controller,
so there is no need to include <linux/gpio.h>.
Remove the unneeded header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20191026185958.24158-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_fwnode_get_gpiod_from_child() is going away as the name is too
unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_fwnode_get_gpiod_from_child() is going away as the name is too
unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl210Z8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv+kIAKRpO7EuDokQL4qp
hxEEaCMJA1T055EMlNU6FVAq/ZbmapzreUyNYiRMpPWKGTWNMkhIcZQfysYeGZz5
y/KRxAiVxlcB+3v3yRmoZd/XoQmhgvJmqD4zhaGI2Utonow4f/SGSEFFZqqs9WND
4HJROjZHgQ4JBxg9Z+QMo0FxbV/DCZpEOUq51N9WJywyyDRb18zotE83stpU+pE2
fjqT7mk0NLrnYXuDRAbFC1Aau9ed4H6LlwLmxaqxq/Pt5Rz7wIKwKL9HIT4Dm/0a
qpani6phhHWL7MwUpa2wkEonFCD03rJFl3DUVJo64Ijh4up5D/jyXQ+GKV2P4WKJ
275Rb5Q=
=WiZZ
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rc5' into next
Sync up with mainline.
Pull input fix from Dmitry Torokhov:
"A fix for st1232 driver to properly report coordinates for 2nd and
subsequent fingers when more than one is on the surface"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: st1232 - fix reporting multitouch coordinates
On some platforms the adp5589 is used in GPIO only mode. On these platforms
we do not want to register a input device, so make that optional and only
create the input device if a keymap is supplied.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20191023070541.13940-1-alexandru.ardelean@analog.com
[dtor: dropped unnecessary changes related to passing pdata to various
functions]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver contains half of the implementation of /dev/rtc, but this
was never completed, and it is now incompatible with the drivers/rtc
framework.
Remove the chardev completely. If anyone wants to add the functionality
later, that shoudl be done through rtc_register_device().
The remaining portions of the driver basically implement a single
procfs file that may or may not be used anywhere. Not sure why this
is in drivers/input/ though.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20191023142521.3643152-1-arnd@arndb.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov:
"The main change is that we are reverting blanket enablement of SMBus
mode for devices with Elan touchpads that report BIOS release date as
2018+ because there are older boxes with updated BIOSes that still do
not work well in SMbus mode.
We will have to establish whitelist for SMBus mode it looks like"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: elantech - enable SMBus on new (2018+) systems"
Input: synaptics-rmi4 - avoid processing unknown IRQs
Input: soc_button_array - partial revert of support for newer surface devices
Input: goodix - add support for 9-bytes reports
Input: da9063 - fix capability and drop KEY_SLEEP
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and scu key etc..
Adds i.MX system controller key driver support, Linux kernel has
to communicate with system controller via MU (message unit) IPC
to get scu key's status.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1570412509-7893-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case the interrupt line is not available, polling can be used
to read out the state of the keys. Period of the polling needs to
be configured by the poll-interval DT property.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 883a2a80f7.
Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.
So let's revert this patch.
There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rmi_process_interrupt_requests() calls handle_nested_irq() for
each interrupt status bit it finds. If the irq domain mapping for
this bit had not yet been set up, then it ends up calling
handle_nested_irq(0), which causes a NULL pointer dereference.
There's already code that masks the irq_status bits coming out of the
hardware with current_irq_mask, presumably to avoid this situation.
However current_irq_mask seems to more reflect the actual mask set
in the hardware rather than the IRQs software has set up and registered
for. For example, in rmi_driver_reset_handler(), the current_irq_mask
is initialized based on what is read from the hardware. If the reset
value of this mask enables IRQs that Linux has not set up yet, then
we end up in this situation.
There appears to be a third unused bitmask that used to serve this
purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask
to avoid calling handle_nested_irq() on IRQs that have not yet been
set up.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previous change moved platform data definition into the driver, making it
unusable for users. Given that we want to move away from custom platform
data structures, and always use device properties (DT, ACPI or static) to
configure devices, let's complete the removal.
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the case of defer probe we should not print an error message.
This also aligns with how defer probe is handled in the other GPIOs
used by this driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The pixcir datasheet lists the registers addresses in decimal and
so are PIXCIR_REG_POWER_MODE and PIXCIR_REG_INT_MODE defined in decimal.
Change the error messages to print the register addresses in decimal
instead of hexadecimal for better readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Keep the header files in alphabetical order to keep it
more organized.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
All the defined symbols from linux/platform_data/pixcir_i2c_ts.h
are only used by the pixcir_i2c_ts driver, so move all the definitions
locally and get rid of the pixcir_i2c_ts.h file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchscreen device is a GPIO consumer, not a GPIO controller,
so there is no need to include <linux/gpio.h>.
Remove the unneeded header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit c394159310 ("Input: soc_button_array - add support for newer
surface devices") not only added support for the MSHW0040 ACPI HID,
but for some reason it also makes changes to the error handling of the
soc_button_lookup_gpio() call in soc_button_device_create(). Note ideally
this seamingly unrelated change would have been made in a separate commit,
with a message explaining the what and why of this change.
I guess this change may have been added to deal with -EPROBE_DEFER errors,
but in case of the existing support for PNP0C40 devices, treating
-EPROBE_DEFER as any other error is deliberate, see the comment this
commit adds for why.
The actual returning of -EPROBE_DEFER to the caller of soc_button_probe()
introduced by the new error checking causes a serious regression:
On devices with so called virtual GPIOs soc_button_lookup_gpio() will
always return -EPROBE_DEFER for these fake GPIOs, when this happens
during the second call of soc_button_device_create() we already have
successfully registered our first child. This causes the kernel to think
we are making progress with probing things even though we unregister the
child before again before we return the -EPROBE_DEFER. Since we are making
progress the kernel will retry deferred-probes again immediately ending
up stuck in a loop with the following showing in dmesg:
[ 124.022697] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6537
[ 124.040764] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6538
[ 124.056967] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6539
[ 124.072143] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6540
[ 124.092373] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6541
[ 124.108065] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6542
[ 124.128483] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6543
[ 124.147141] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6544
[ 124.165070] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6545
[ 124.179775] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6546
[ 124.202726] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6547
<continues on and on and on>
And 1 CPU core being stuck at 100% and udev hanging since it is waiting
for the modprobe of soc_button_array to return.
This patch reverts the soc_button_lookup_gpio() error handling changes,
fixing this regression.
Fixes: c394159310 ("Input: soc_button_array - add support for newer surface devices")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205031
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20191005105551.353273-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some drivers need to be able to know the current polling interval for
devices working in polling mode, let's allow them fetching it.
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some variants of Goodix touchscreen firmwares use 9-bytes finger
report format instead of common 8-bytes format.
This report format may be present as:
struct goodix_contact_data {
uint8_t unknown1;
uint8_t track_id;
uint8_t unknown2;
uint16_t x;
uint16_t y;
uint16_t w;
}__attribute__((packed));
Add support for such format and use it for Lenovo Yoga Book notebook
(which uses a Goodix touchpad as a touch keyboard).
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since commit f889beaaab ("Input: da9063 - report KEY_POWER instead of
KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This
caused input device to not generate any events if "dlg,disable-key-power"
is set.
Fix this by unconditionally setting KEY_POWER capability, and not
declaring KEY_SLEEP.
Fixes: f889beaaab ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Across suspend and resume, we are seeing error messages like the following:
atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)
This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.
Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- input core allows hardware drivers to specify a [more precise]
timestamp (normally taken in top half) to better track velocity of
contacts
- input_dev instances now support "polling" mode so that drivers could
use the same object for polled and interrupt-driven operation. The
plan is to convert existing drivers and retire input_polled_dev API
- a new driver for the FlySky FS-iA6B RC receiver
- a refresh of BU21013 touchpad driver
- w90x900 keyboard and touchpad drivers are removed as the platform is
gone
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: sidewinder - make array seq static const, makes object smaller
Input: reset device timestamp on sync
Input: bu21013_ts - switch to using standard touchscreen properties
Input: bu21013_ts - switch to using MT-B (slotted) protocol
Input: bu21013_ts - fix suspend when wake source
Input: bu21013_ts - use interrupt from I2C client
Input: bu21013_ts - remove support for platform data
Input: bu21013_ts - convert to using managed resources
Input: bu21013_ts - remove useless comments
Input: bu21013_ts - annotate supend/resume methods as __maybe_unused
Input: bu21013_ts - rename some variables
Input: bu21013_ts - convert to use GPIO descriptors
ARM: ux500: improve BU21013 touchpad bindings
Input: i8042 - enable wakeup on a stable struct device
Input: soc_button_array - use platform_device_register_resndata()
Input: psmouse - drop all unneeded functions from mouse headers
Input: add support for polling to input devices
Input: wacom_w8001 - allocate additional space for 'phys'
Input: cros_ec_keyb - add back missing mask for event_type
Input: remove dev_err() usage after platform_get_irq()
...
-----BEGIN PGP SIGNATURE-----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=QTT+
-----END PGP SIGNATURE-----
Merge tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a new sensor driver for ov5675
- a new platform driver for Allwinner A10 sensor interface
- some new remote controller keymaps
- some cosmetic changes at V4L2 core in order to avoid #ifdefs and to
merge two core modules into one
- removal of bcm2048 radio driver from staging
- removal of davinci_vpfe video driver from staging
- regression fix since Kernel 5.1 at the legacy VideoBuffer version 1
core
- added some documentation for remote controller protocols
- pixel format documentation was split on two files
- lots of other driver improvements and cleanups
* tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
media: videobuf-core.c: poll_wait needs a non-NULL buf pointer
media: sun4i: Make sun4i_csi_formats static
media: imx: remove unused including <linux/version.h>
media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()
media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code
media: em28xx: Fix exception handling in em28xx_alloc_urbs()
media: don't do a 31 bit shift on a signed int
media: use the BIT() macro
media: ov9650: add a sanity check
media: aspeed-video: address a protential usage of an unitialized var
media: vicodec: make life easier for static analyzers
media: remove include stdarg.h from some drivers
v4l2-core: fix coding style for the two new c files
media: v4l2-core: Remove BUG() from i2c and spi helpers
media: v4l2-core: introduce a helper to unregister a i2c subdev
media: v4l2-core: introduce a helper to unregister a spi subdev
media: v4l2-core: move i2c helpers out of v4l2-common.c
media: v4l2-core: move spi helpers out of v4l2-common.c
media: v4l2-core: Module re-organization
media: usbvision: Remove dead code
...
Don't populate the array seq on the stack but instead make it
static const. Makes the object code smaller by 30 bytes.
Before:
text data bss dec hex filename
22284 3184 0 25468 637c drivers/input/joystick/sidewinder.o
After:
text data bss dec hex filename
22158 3280 0 25438 635e drivers/input/joystick/sidewinder.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need to reset input device's timestamp on input_sync(), otherwise
drivers not using input_set_timestamp() will end up with a stale
timestamp after their clients consume first input event.
Fixes: 3b51c44bd6 ("Input: allow drivers specify timestamp for input events")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This switches the driver over to the standard touchscreen properties for
coordinate transformation, while keeping old bindings working as well.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MT-B protocol is more efficient and everyone expects it. We use in-kernel
tracking to identify contacts.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If the touchscreen is configured as wakeup source we should not be cutting
off power to it.
Also, now that the driver relies on I2C client to supply IRQ, we do not
need to explicitly enable and disable IRQ for wakeup: if device is created
as wakeup source, I2C core will mark interrupt as wakeup one.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of trying to map INT GPIO to interrupt, let's use one supplied by
I2C client. If there is none - bail. This will also allow us to treat INT
GPIO as optional, as per the binding.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no current users of the platform data in the tree, and
any new users should either use device tree, or static device
properties to describe the device.
This change drop the platform data definition and handling and moves the
driver over to generic device properties API. We also drop support for the
external clock. If it is needed we will have to extend the bindings to
supply the clock reference and handle it properly in the driver.
Also, wakeup setting should be coming from I2C client.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The comments for individual functions in the driver do not provide any
additional information beyond what function names indicate.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead if #ifdef-ing out suspend and resume methods, let's mark
them as __maybe_unused to get better compile time coverage.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
"bu21013_data" and "struct bu21013_ts_data" are a tad long, let's call them
"ts" and "struct bu21013_ts".
Also rename retval to error in bu21013_init_chip() and adjust formatting;
i2c_smbus_write_byte_data() returns negative on error and 0 on success, so
we simply test if whether erro is 0 or not.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver can use GPIO descriptors rather than GPIO numbers
without any problems, convert it. Name the field variables after
the actual pins on the chip rather than the "reset" and "touch"
names from the devicetree bindings that are vaguely inaccurate.
No in-tree users pass GPIO numbers in platform data so drop
this. Descriptor tables can be used to get these GPIOs from a board
file if need be.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
We don't know when the device will be added with device_add() in
serio_add_port() because serio_add_port() is called from a workqueue
that this driver schedules by calling serio_register_port(). The best we
can know is that the device will definitely not have been added yet when
the start callback is called on the serio device.
While it hasn't been shown to be a problem, proactively move the wakeup
enabling calls to the start hook so that we don't race with the
workqueue calling device_add(). This will avoid racy situations where
code tries to add wakeup sysfs attributes for this device from
dpm_sysfs_add() but the path in device_set_wakeup_capable() has already
done so.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The registration of gpio-keys device can be written much shorter
by using the platform_device_register_resndata() helper.
Signed-off-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Recently we had a building error if we enable the MOUSE_PS2_ALPS while
disable the MOUSE_PS2_TRACKPOINT, and was fixed by 49e6979e7e
("Input: psmouse - fix build error of multiple definition").
We could improve that fix by dropping all unneeded functions and
CONFIG_MOUSE_ guards from the header, it is safe to do that since
those functions are not directly called by psmouse-base.c anymore.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Separating "normal" and "polled" input devices was a mistake, as often we
want to allow the very same device work on both interrupt-driven and
polled mode, depending on the board on which the device is used.
This introduces new APIs:
- input_setup_polling
- input_set_poll_interval
- input_set_min_poll_interval
- input_set_max_poll_interval
These new APIs allow switching an input device into polled mode with sysfs
attributes matching drivers using input_polled_dev APIs that will be
eventually removed.
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GCC warns that the output of our call to 'snprintf' in 'w8001_connect'
may be truncated since both 'serio->phys' and 'w8001->phys' are 32 bytes
in length. Increase the amount of space allocated for the latter to
compensate.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Simplify the ring buffer handling with the in-place API.
Also avoid the dynamic allocation and the memory leak in the channel
callback function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
In the previous patch we didn't mask out event_type in case statement,
so switches are always picked instead of buttons, which results in
ChromeOS devices misbehaving when power button is pressed.
This patch adds back the missing mask.
Fixes: d096aa3eb6 ("Input: cros_ec_keyb: mask out extra flags in event_type")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use use device_property_count_u32() directly, that makes code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Drivers now have the option to have the driver core create and remove any
needed sysfs attribute files. So take advantage of that and do not
register "by hand" a sysfs group of attributes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Drivers now have the option to have the driver core create and remove any
needed sysfs attribute files. So take advantage of that and do not
register "by hand" a bunch of sysfs files.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl1QegseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGavMH/RBaR39ct3XXpPzC
yxmKJn/n692NXFKusfsfasitGHMdFom6HaCcKx4PpzX1QHnR34LJtMd1QvwM8cHz
FtbC68HyZBB91JOUzC38GbRufvVUsSeXg8YeBiF6BOoOP06OcOG+DKoPcKBOMXsR
MtJmgxEyedLT7ozEPTpowVBWulELJxkbe1MCc93xDXdOqT+aMuxZBASMJIgrufS7
uJTsJ/afHz6F29Mj6Q9lfIJJSHqSfMK/rPGP54xRdBgMWmAmNjA2aExyCK8PE/Yb
TChsrDjDz38ePuVaWfjtwFNWlWcq0Do8vJdPuAxZDdfaJlQDXQHCWXsJjrWD6oNy
ZhCq0zE=
=HcEO
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rc4' into next
Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.
Pull input updates from Dmitry Torokhov:
- newer systems with Elan touchpads will be switched over to SMBus
- HP Spectre X360 will be using SMbus/RMI4
- checks for invalid USB descriptors in kbtab and iforce
- build fixes for applespi driver (misconfigs)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add sanity checks
Input: applespi - use struct_size() helper
Input: kbtab - sanity check for endpoint type
Input: usbtouchscreen - initialize PM mutex before using it
Input: applespi - add dependency on LEDS_CLASS
Input: synaptics - enable RMI mode for HP Spectre X360
Input: elantech - annotate fall-through case in elantech_use_host_notify()
Input: elantech - enable SMBus on new (2018+) systems
Input: applespi - fix trivial typo in struct description
Input: applespi - select CRC16 module
Input: applespi - fix warnings detected by sparse
The ARM w90x900 platform is getting removed, so this driver is obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ARM w90x900 platform is getting removed, so this driver is obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This should be 'synaptics', not 'synpatics'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A few vendor specific bindings are now covered by common bindings.
Let the driver parse the common bindings to make use of common
inverting and swapping mechnism. Aslo make use of
touchscreen_report_pos() to ensure the correct inverting-swapping
order.
The vendor specific properties are used as default (backward
compatibility) and gets overwritten by common bindings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The endpoint type should also be checked before a device
is accepted.
Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct touchpad_protocol {
...
struct tp_finger fingers[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*tp) + tp->number_of_fingers * sizeof(tp->fingers[0]);
with:
struct_size(tp, fingers, tp->number_of_fingers)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver should check whether the endpoint it uses has the correct
type.
Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If applespi is enabled, but LEDs class support is not, the build fails:
drivers/input/keyboard/applespi.o: In function `applespi_probe':
applespi.c:(.text+0x1fcd): undefined reference to `devm_led_classdev_register_ext'
Add "depends on LEDS_CLASS" to the Konfig
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 038b1a05ea ("Input: add Apple SPI keyboard and trackpad driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Power and volume button support for 5th and 6th generation Microsoft
Surface devices via soc_button_array.
Note that these devices use the same MSHW0040 device as on the Surface
Pro 4, however the implementation is different (GPIOs vs. ACPI
notifications). Thus some checking is required to ensure we only load
this driver on the correct devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The 2016 kabylake HP Spectre X360 (model number 13-w013dx) works much better
with psmouse.synaptics_intertouch=1 kernel parameter, so let's enable RMI4
mode automatically.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204115
Reported-by: Nate Graham <pointedstick@zoho.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently, evdev stamps events with timestamps acquired in evdev_events()
However, this timestamping may not be accurate in terms of measuring
when the actual event happened.
Let's allow individual drivers specify timestamp in order to provide a more
accurate sense of time for the event. It is expected that drivers will set the
timestamp in their hard interrupt routine.
Signed-off-by: Atif Niyaz <atifniyaz@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of installing custom devm cleanup action to remove attribute
groups on failure, let's use the dedicated devm API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of manually disabling regulators when devm_add_action() fails we can
use devm_add_action_or_reset() which does it for us.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of installing custom devm cleanup action to remove attribute
groups on failure, let's use the dedicated devm API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The function rmi_2d_sensor_set_input_params is declared static and marked
EXPORT_SYMBOL_GPL, which is at best an odd combination. Because the
function is not used outside of the drivers/input/rmi4/rmi_2d_sensor.c
file it is defined in, this commit removes the EXPORT_SYMBOL_GPL() marking.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_platform_ioremap_resource() internally have platform_get_resource()
and devm_ioremap_resource() in it. So instead of calling them separately
use devm_platform_ioremap_resource() directly.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_platform_ioremap_resource() internally have platform_get_resource()
and devm_ioremap_resource() in it. So instead of calling them separately
use devm_platform_ioremap_resource() directly.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_platform_ioremap_resource() internally have platform_get_resource()
and devm_ioremap_resource() in it. So instead of calling them separately
use devm_platform_ioremap_resource() directly.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
devm_platform_ioremap_resource() internally have platform_get_resource()
and devm_ioremap_resource() in it. So instead of calling them separately
use devm_platform_ioremap_resource() directly.
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This avoids a warning when building with -Wimplicit-fallthrough.
Fixes: 883a2a80f7 ("Input: elantech - enable SMBus on new (2018+) systems")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are some new HP laptops with Elantech touchpad that don't support
multitouch.
Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported,
but in addition to firmware version, the bus type also informs us whether the IC
can support SMBus. To avoid breaking old ICs, we will only enable SMbus support
based the bus type on systems manufactured after 2018.
Lastly, let's consolidate all checks into elantech_use_host_notify() and use it
to determine whether to use PS/2 or SMBus.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This fixes a typo in the keyboard_protocol description.
coodinate -> coordinate.
Signed-off-by: Nikolas Nyby <nikolas@gnu.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In some rare randconfig builds, CRC16 is disabled, which leads
to a link error:
drivers/input/keyboard/applespi.o: In function `applespi_send_cmd_msg':
applespi.c:(.text+0x449f): undefined reference to `crc16'
drivers/input/keyboard/applespi.o: In function `applespi_verify_crc':
applespi.c:(.text+0x7538): undefined reference to `crc16'
This symbol is meant to be selected for each user in Kconfig,
so do that here as well.
Fixes: 038b1a05ea ("Input: add Apple SPI keyboard and trackpad driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver set the colorspace to SRGB, but that makes no sense for
a touchscreen. Use RAW instead. This also ensures consistency with the
v4l_pix_format_touch() call that's used in v4l2-ioctl.c.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Florian Echtler <floe@butterbrot.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS).
It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote
controls as a joystick input device.
To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud
serial device is required. I will upstream it after this patch is merged.
More information about the hardware can be found here:
https://notsyncing.net/?p=blog&b=2018.linux-fsia6b
Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This makes sure that we convert from on-wire to CPU endianness in
applespi_debug_update_dimensions() and also marks as "static" as it is not
needed to be visible outside of the driver.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more input updates from Dmitry Torokhov:
- Apple SPI keyboard and trackpad driver for newer Macs
- ALPS driver will ignore trackpoint-only devices to give the
trackpoint driver a chance to handle them properly
- another Lenovo is switched over to SMbus from PS/2
- assorted driver fixups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - fix a mismatch between a condition check and its comment
Input: psmouse - fix build error of multiple definition
Input: applespi - remove set but not used variables 'sts'
Input: add Apple SPI keyboard and trackpad driver
Input: alps - don't handle ALPS cs19 trackpoint-only device
Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer
Input: adp5589 - initialize GPIO controller parent device
Input: iforce - remove empty multiline comments
Input: synaptics - fix misuse of strlcpy
Input: auo-pixcir-ts - switch to using devm_add_action_or_reset()
Input: gtco - bounds check collection indent level
Input: mtk-pmic-keys - add of_node_put() before return
Input: sun4i-lradc-keys - add of_node_put() before return
Input: synaptics - whitelist Lenovo T580 SMBus intertouch
In the function alps_is_cs19_trackpoint(), we check if the param[1] is
in the 0x20~0x2f range, but the code we wrote for this checking is not
correct:
(param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f,
it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f...
Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20).
Fixes: 7e4935ccc3 ("Input: alps - don't handle ALPS cs19 trackpoint-only device")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:
drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 55e3d9224b ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/input/keyboard/applespi.c: In function applespi_set_bl_level:
drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable]
Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The keyboard and trackpad on recent MacBook's (since 8,1) and
MacBookPro's (13,* and 14,*) are attached to an SPI controller instead
of USB, as previously. The higher level protocol is not publicly
documented and hence has been reverse engineered. As a consequence there
are still a number of unknown fields and commands. However, the known
parts have been working well and received extensive testing and use.
In order for this driver to work, the proper SPI drivers need to be
loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci;
for all others they are spi_pxa2xx_platform and intel_lpss_pci.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331
Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On a latest Lenovo laptop, the trackpoint and 3 buttons below it
don't work at all, when we move the trackpoint or press those 3
buttons, the kernel will print out:
"Rejected trackstick packet from non DualPoint device"
This device is identified as an alps touchpad but the packet has
trackpoint format, so the alps.c drops the packet and prints out
the message above.
According to XiaoXiao's explanation, this device is named cs19 and
is trackpoint-only device, its firmware is only for trackpoint, it
is independent of touchpad and is a device completely different from
DualPoint ones.
To drive this device with mininal changes to the existing driver, we
just let the alps driver not handle this device, then the trackpoint.c
will be the driver of this device if the trackpoint driver is enabled.
(if not, this device will fallback to a bare PS/2 device)
With the trackpoint.c, this trackpoint and 3 buttons all work well,
they have all features that the trackpoint should have, like
scrolling-screen, drag-and-drop and frame-selection.
Signed-off-by: XiaoXiao Liu <sliuuxiaonxiao@gmail.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Samuel Holland