This commit adds three read-side-only tests of three use cases featuring
SLAB_TYPESAFE_BY_RCU: One using per-object reference counting, one using
per-object locking, and one using per-object sequence locking.
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Current tests all have init() functions that are guaranteed to succeed.
But upcoming tests will need to allocate memory, thus possibly failing.
This commit therefore handles init() function failure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In kernels built with CONFIG_PREEMPT_RT=y, spinlocks are replaced by
rt_mutex, which can sleep. This means that acquiring a non-raw spinlock
in a critical section where preemption is disabled can trigger the
following BUG:
BUG: scheduling while atomic: ref_scale_reade/76/0x00000002
Preemption disabled at:
ref_lock_section+0x16/0x80
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
__schedule_bug.cold+0x9c/0xad
__schedule+0x839/0xc00
schedule_rtlock+0x22/0x40
rtlock_slowlock_locked+0x460/0x1350
rt_spin_lock+0x61/0xe0
ref_lock_section+0x29/0x80
rcu_scale_one_reader+0x52/0x60
ref_scale_reader+0x28d/0x490
kthread+0x128/0x150
ret_from_fork+0x22/0x30
</TASK>
This commit therefore converts spinlock to raw_spinlock.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add '\n' to macros to flush message for each call.
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An OOM is a serious error that should be logged even in non-verbose runs.
This commit therefore adds an unconditional SCALEOUT_ERRSTRING() macro
and uses it instead of VERBOSE_SCALEOUT_ERRSTRING() when reporting an OOM.
[ paulmck: Drop do-while from SCALEOUT_ERRSTRING() due to only single statement. ]
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
0Day/LKP observed that the refscale results fail to complete when larger
values of nrun (such as 300) are specified. The problem is that printk()
can accept at most a 1024-byte buffer. This commit therefore prints
the buffer whenever its length exceeds 800 bytes.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is only the one OOM error case in main_func(), so this commit
eliminates the errexit local variable in favor of a branch to cleanup
code.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When running refscale as a module, any ref_scale_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running refscale
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing ref_scale_init()
errors when running refscale built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a "clock" type to refscale, which checks the performance
of ktime_get_real_fast_ns(). Use the "clocksource=" kernel boot parameter
to select the underlying clock source.
[ paulmck: Work around compiler false positive per kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the call to set_cpus_allowed_ptr() in ref_scale_reader()
fails, a later WARN_ONCE() complains. But with the advent of
570a752b7a ("lib/smp_processor_id: Use is_percpu_thread() instead of
nr_cpus_allowed"), this complaint can be drowned out by complaints from
smp_processor_id(). The rationale for this change is that refscale's
kthreads are not marked with PF_NO_SETAFFINITY, which means that a system
administrator could change affinity at any time.
However, refscale is a performance/stress test, and the system
administrator might well have a valid test-the-test reason for changing
affinity. This commit therefore changes to raw_smp_processor_id()
in order to avoid the noise, and also adds a WARN_ON_ONCE() to the
call to set_cpus_allowed_ptr() in order to directly detect immediate
failure. There is no WARN_ON_ONCE() within the test loop, allowing
human-reflex-based affinity resetting, if desired.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds scale_type of acqrel, lock, and lock-irq to
test acquisition and release. Note that the refscale.nreaders=1
module parameter is required if you wish to test uncontended locking.
In contrast, acqrel uses a per-CPU variable, so should be just fine with
large values of the refscale.nreaders=1 module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a short delay for verbose_batched-throttled printk()s
to further decrease console flooding.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The refscale test prints enough per-kthread console output to provoke RCU
CPU stall warnings on large systems. This commit therefore allows this
output to be summarized. For example, the refscale.verbose_batched=32
boot parameter would causes only every 32nd line of output to be logged.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an refscale torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good. What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument. This commit therefore forces an immediate
kernel shutdown if a ref_scale_init()-time error occurs, thus avoiding
the appearance of a hang. It also forces a console splat in this case
to clearly indicate the presence of an error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The default value for refscale.nreaders is -1, which results in the code
setting the value to three-quarters of the number of CPUs. On single-CPU
systems, this results in three-quarters of the value one, which the C
language's integer arithmetic rounds to zero. This in turn results in
a divide-by-zero error.
This commit therefore adds bounds checking to the refscale module
parameters, so that if they are less than one, they are set to the
value one.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by "Chen, Rong A" <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently in the unlikely event that buf fails to be allocated it
is dereferenced a few times. Use the errexit flag to determine if
buf should be written to to avoid the null pointer dereferences.
Addresses-Coverity: ("Dereference after null check")
Fixes: f518f154ec ("refperf: Dynamically allocate experiment-summary output buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of refperf with the kernel's perf
feature by renaming kernel/rcu/refperf.c to kernel/rcu/refscale.c,
and also by similarly renaming the functions and variables inside
this file. This has the side effect of changing the names of the
kernel boot parameters, so kernel-parameters.txt and ver_functions.sh
are also updated.
The rcutorture --torture type remains refperf, and this will be
addressed in a separate commit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Paul E. McKenney