- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Whilst writing testcases to exercise the VMA API, some oddities came to
light, such as i915_gem_obj_lookup_or_create(). Joonas suggested
i915_vma_instance() as a neat replacement, so rename them, move them to
i915_vma.c and add some kerneldoc as a sugary bonus.
s/i915_gem_obj_to_vma/i915_vma_lookup/
s/i915_gem_obj_lookup_or_create_vma/i915_vma_instance/
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-2-chris@chris-wilson.co.uk
With atomic plane states we are able to track an allocation right from
preparation, during use and through to the final free after being
swapped out for a new plane. We can couple the VMA we pin for the
framebuffer (and its rotation) to this lifetime and avoid all the clumsy
lookups in between.
v2: Remove residual vma on plane cleanup (Chris)
v3: Add a description for the vma destruction in
intel_plane_destroy_state (Maarten)
References: https://bugs.freedesktop.org/show_bug.cgi?id=98829
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-1-chris@chris-wilson.co.uk
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.
HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.
v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon)
update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v6: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v7: Change dev to dev_priv in macro definition.
Corrected comments.
v8: rebased on top of drm-tip. Updated functions intel_huc_load(),
intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of
dev. Moved contents of intel_huc.h to intel_uc.h.
v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
simply fw to avoid redundency.
v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv
instead of dev like intel_huc_init() and intel_huc_load().Move definition
to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA
transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable
WARNs to give extra info.
v11: rebased. Add proper bias for HuC and make sure there are
asserts on failure by using guc_ggtt_offset_vma(). Introduce
intel_huc.c and remove intel_huc_loader.c since it has functions that
do more than just loading.Correct year in copyright.
v12: remove invalidates that are not required anymore.
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
If we can't recover the GPU after the reset, mark it as wedged to cancel
the outstanding tasks and to prevent new users from trying to use the
broken GPU.
v2: Check the same ring is hung again before declaring the reset broken.
v3: use engine_stalled (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-6-git-send-email-mika.kuoppala@intel.com
As per edp1.4 spec , alpm is required for psr2 operation as it's
used for all psr2 main link power down management and alpm enable
bit must be set for psr2 operation.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483356663-32668-6-git-send-email-vathsala.nagaraju@intel.com
The internal object is a collection of struct pages and so is
intrinsically linked to the available physical memory on the machine,
and not an arbitrary type from the uabi. Use phys_addr_t so the link
between size and memory consumption is clear, and then double check that
we don't overflow the maximum object size.
v2: Also assert that size is not zero - a mistake I made a few times
while writing selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112130431.1844-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The core provides now an ABI to userspace for generation of frame CRCs,
so implement the ->set_crc_source() callback and reuse as much code as
possible with the previous ABI implementation.
When handling the pageflip interrupt, we skip 1 or 2 frames depending on
the HW because they contain wrong values. For the legacy ABI for
generating frame CRCs, this was done in userspace but now that we have a
generic ABI it's better if it's not exposed by the kernel.
v2:
- Leave the legacy implementation in place as the ABI implementation
in the core is incompatible with it.
v3:
- Use the "cooked" vblank counter so we have a whole 32 bits.
- Make sure we don't mess with the state of the legacy CRC capture
ABI implementation.
v4:
- Keep use of get_vblank_counter as in the legacy code, will be
changed in a followup commit.
v5:
- Skip first frame or two as it's known that they contain wrong
data.
- A few fixes suggested by Emil Velikov.
v6:
- Rework programming of the HW registers to preserve previous
behavior.
v7:
- Address whitespace issue.
- Added a comment on why in the implementation of the new ABI we
skip the 1st or 2nd frames.
v9:
- Add stub for intel_crtc_set_crc_source.
v12:
- Rebased.
- Remove stub for intel_crtc_set_crc_source and instead set the
callback to NULL (Jani Nikula).
v15:
- Rebased.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
irq
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-2-tomeu.vizoso@collabora.com
Continue to clean up drmP.h by moving the cache flushing functions into
it's own header file.
Compile-tested only
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109215649.6860-2-krisman@collabora.co.uk
Rename i915_gem_get_ggtt_size() and i915_gem_get_ggtt_alignment() to
i915_gem_fence_size() and i915_gem_fence_alignment() respectively to
better match usage. Similarly move the pair of functions into
i915_gem_tiling.c next to the fence restrictions.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
Ensure the view occupies the full tile row so that reads/writes into the
VMA do not escape (via fenced detiling) into neighbouring objects - we
will pad the object with scratch pages to satisfy the fence. This
applies the lazy-tiling we employed on gen2/3 to gen4+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-2-chris@chris-wilson.co.uk
Though we know the hw is limited to keeping stolen memory inside the
first 4GiB, it is clearer to the reader that we are handling physical
address if we use phys_addr_t to refer to the base of stolen memory.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-2-chris@chris-wilson.co.uk
In order to silence sparse:
../drivers/gpu/drm/i915/i915_gpu_error.c:200:39: warning: Using plain integer as NULL pointer
add a helper to check whether we have sse4.1 and that the desired
alignment is valid for acceleration.
v2: Explain the macros and split the two use cases between
i915_has_memcpy_from_wc() and i915_can_memcpy_from_wc().
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-1-chris@chris-wilson.co.uk
Now that we have split out a header file for simple macros (that maybe
we can promote into a core header), move a few macros across from
i915_drv.h
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105164148.26875-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In order to defeat some circular dependencies between headers to allow use
of e.g. range_overflows() in a header, move the simple independent macros
into their own header.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-4-chris@chris-wilson.co.uk
The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.
v2: Fix up commentary.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Directly merge drm-misc into drm-intel since Dave is on vacation and
we need the various drm-misc patches (fb format rework, drm mm fixes,
selftest framework and others). Also pulled back -rc2 in first to
resync with drm-intel-fixes and make sure I can reuse the exact rerere
solutions from drm-tip for safety, and because I'm lazy.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In future patches, we require greater flexibility in describing
the number of scalers available on each CRTC. To ease that transition
we move the current assignment to intel_device_info.
Scaler structure initialisation is done if scaler is available on the CRTC.
Gen9 check is not required as on depending upon numbers of scalers we
initialize scalers or return without doing anything in skl_init_scalers.
v3: Changed skl_init_scaler to intel_crtc_init_scalers
v2: Added Chris's comments.
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480398794-22741-1-git-send-email-nabendu.bikash.maiti@intel.com
The read of the page pin count and the bind count are unordered,
presenting races in the assert and it firing off incorrectly. Prevent
this by restricting the assert to the vma bind/unbind routines where we
have local cpu ordering between the two.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-1-chris@chris-wilson.co.uk
GuC will validate the ring offset and fail if it is in the
[0, GUC_WOPCM_TOP) range. The bias is conditionally applied only
if GuC loading is enabled (we can't check for guc submission enabled as
in other cases because HuC loading requires this fix).
Note that the default context is processed before enable_guc_loading is
sanitized, so we might still apply the bias to its ring even if it is
not needed.
v2: compute the value during ctx init and pass it to
intel_ring_pin (Chris), updated commit message
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482537382-28584-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The idle work handler is self-arming - if it detects that it needs to
run again it will queue itself from its work handler. Take greater care
when trying to drain the idle work, and double check that it is flushed.
The free worker has a similar issue where it is armed by an RCU task
which may be running concurrently with us.
This should hopefully help with the sporadic WARN_ON(dev_priv->gt.awake)
from i915_gem_suspend.
v2: Reuse drain_freed_objects.
v3: Don't try to flush the freed objects from the shrinker, as it may be
underneath the struct_mutex already.
v4: do while and comment upon the excess rcu_barrier in drain_freed_objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-2-chris@chris-wilson.co.uk
There is at least one APL based system using port A in DP mode
(connecting to an on-board DP->VGA adaptor). Atm we'll configure port A
unconditionally as eDP which is incorrect in this case. Fix this by
relying on the VBT DDI port 'internal port' flag instead on all ports on
DDI platforms. For now chicken out from using VBT for port A before
GEN9.
v2:
- Move the DDI port info lookup to intel_bios_is_port_edp() (David, Jani)
- Use the DDI port info on all DDI platforms starting from port B.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482315444-24750-1-git-send-email-imre.deak@intel.com
Valleyview/Baytrail (gen7_lp) and Cherryview/Braswell (gen8_lp)
are both Atom platforms like Broxton/Apollolake and Geminilake.
So let's expand this is_lp back to these platforms and
create the IS_LP(dev_priv) so we can start simplifying a bit
our if/else for platform lists.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-1-git-send-email-rodrigo.vivi@intel.com
The kref_put_mutex() returns with the mutex held after freeing the
object - so we must remember to drop it...
Fixes: 69df05e11a ("drm/i915: Simplify releasing context reference")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219101357.28140-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A few users only take the struct_mutex in order to release a reference
to a context. We can expose a kref_put_mutex() wrapper in order to
simplify these users, and optimise taking of the mutex to the final
unref.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-4-chris@chris-wilson.co.uk
The requests conversion introduced a nasty bug where we could generate a
new request in the middle of constructing a request if we needed to idle
the system in order to evict space for a context. The request to idle
would be executed (and waited upon) before the current one, creating a
minor havoc in the seqno accounting, as we will consider the current
request to already be completed (prior to deferred seqno assignment) but
ring->last_retired_head would have been updated and still could allow
us to overwrite the current request before execution.
We also employed two different mechanisms to track the active context
until it was switched out. The legacy method allowed for waiting upon an
active context (it could forcibly evict any vma, including context's),
but the execlists method took a step backwards by pinning the vma for
the entire active lifespan of the context (the only way to evict was to
idle the entire GPU, not individual contexts). However, to circumvent
the tricky issue of locking (i.e. we cannot take struct_mutex at the
time of i915_gem_request_submit(), where we would want to move the
previous context onto the active tracker and unpin it), we take the
execlists approach and keep the contexts pinned until retirement.
The benefit of the execlists approach, more important for execlists than
legacy, was the reduction in work in pinning the context for each
request - as the context was kept pinned until idle, it could short
circuit the pinning for all active contexts.
We introduce new engine vfuncs to pin and unpin the context
respectively. The context is pinned at the start of the request, and
only unpinned when the following request is retired (this ensures that
the context is idle and coherent in main memory before we unpin it). We
move the engine->last_context tracking into the retirement itself
(rather than during request submission) in order to allow the submission
to be reordered or unwound without undue difficultly.
And finally an ulterior motive for unifying context handling was to
prepare for mock requests.
v2: Rename to last_retired_context, split out legacy_context tracking
for MI_SET_CONTEXT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk
In a number places we hand-roll the overflow sanity check for ranges, so
roll that into single macro, conceived by Chris, along with its typed
variant.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-3-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Currently the backlight controller is taken as 0. It needs to derive
value from the VBT. Adding the necessary changes.
v2 by Jani:
- drop obsolete comments, drop redundant initialization (Bob)
- merge debug logging into one
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481189178-426-1-git-send-email-jani.nikula@intel.com
This adds a 'Perf' section to i915.rst with the following sub sections:
- Overview
- Comparison with Core Perf
- i915 Driver Entry Points
- i915 Perf Stream
- i915 Perf Observation Architecture Stream
- All i915 Perf Internals
v2:
section headers in i915.rst (Daniel Vetter)
missing symbol docs + other fixups (Matthew Auld)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214033.3581-1-robert@sixbynine.org
commit 848496e590
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcf ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com
This patch changes Watermak calculation to fixed point calculation.
Problem with current calculation is during plane_blocks_per_line
calculation we divide intermediate blocks with min_scanlines and
takes floor of the result because of integer operation.
hence we end-up assigning less blocks than required. Which leads to
flickers.
Changes since V1:
- Add fixed point data type as per Paulo's review
Changes since V2:
- use fixed_point instead of fp_16_16
Changes since V3:
- rebase
Changes since V4 (from Paulo):
- My original renaming suggestion was misunderstood, so implement it
- Simplify fixed_16_16_to_u32 implementation
- Fix indentation
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-6-mahesh1.kumar@intel.com
Display Workarounds #1135
If IPC is enabled in BXT, display underruns are observed.
WA: The Line Time programmed in the WM_LINETIME register should be
half of the actual calculated Line Time.
Programmed Line Time = 1/2*Calculated Line Time
Changes since V1:
- Add Workaround number in commit & code
Changes since V2 (from Paulo):
- Bikeshed white space and make the WA tag look like the others
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-3-mahesh1.kumar@intel.com
Each DSPARB register can house bits for two separate pipes, hence
we must protect the registers during reprogramming so that parallel
FIFO reconfigurations happening simultaneosly on multiple pipes won't
corrupt each others values.
We'll use a new spinlock for this instead of the wm_mutex since we'll
have to move the DSPARB programming to happen from the vblank evade
critical section, and we can't use mutexes in there.
v2: Document why we use a spinlock instead of a mutex (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480947208-18468-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Dave Airlie