Here are two (late) dfl fixes for the the 5.8 release.
Matthew's fix addresses an issue in the reset of a port.
Xu'x fix addresses a linter warning.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQRORt0E5Sb/c/mZMgkXxQAtim5VSwUCXxI3WQ8cbWRmQGtlcm5l
bC5vcmcACgkQF8UALYpuVUukhwEA45oYxqZKEIin00IaZucbYjeBsSlODYmxVUT6
HO/EQsMBAIb/OmIOpnXMREFeYQFB+87MNXwYWmSs7A/1iNxaDVQF
=v3jQ
-----END PGP SIGNATURE-----
Merge tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
Moritz writes:
FPGA manager fixes for 5.8
Here are two (late) dfl fixes for the the 5.8 release.
Matthew's fix addresses an issue in the reset of a port.
Xu'x fix addresses a linter warning.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: fix bug in port reset handshake
fpga: dfl: pci: reduce the scope of variable 'ret'
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The commit below caused a regression for clearfog-gt-8k, where the link
between the switch and the host does not come up.
Investigation revealed two issues:
- MV88E6xxx DSA no longer allows an in-band link to come up as the link
is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix
in-band AN link establishment" addresses this.
- The dts configured dissimilar link modes at each end of the host to
switch link; the host was configured using a fixed link (so has no
in-band status) and the switch was configured to expect in-band
status.
With both issues fixed, the regression is resolved.
Fixes: 34b5e6a33c ("net: dsa: mv88e6xxx: Configure MAC when using fixed link")
Reported-by: Martin Rowe <martin.p.rowe@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
If in-band negotiation or fixed-link modes are specified for a DSA
port, the DSA code will force the link down during initialisation. For
fixed-link mode, this is fine, as phylink will manage the link state.
However, for in-band mode, phylink expects the PCS to detect link,
which will not happen if the link is forced down.
There is a related issue that in in-band mode, the link could come up
while we are making configuration changes, so we should force the link
down prior to reconfiguring the interface mode.
This patch addresses both issues.
Fixes: 3be98b2d5f ("net: dsa: Down cpu/dsa ports phylink will control")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e46365459 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Karsten Graul says:
====================
net/smc: fixes 2020-07-16
Please apply the following patch series for smc to netdev's net tree.
The patches address problems caused by late or unexpected link layer
control packets, dma sync calls for unmapped memory, freed buffers
that are not removed from the buffer list and a possible null pointer
access that results in a crash.
v1->v2: in patch 4, improve patch description and correct the comment
for the new mutex
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a listen socket is closed then all non-accepted sockets in its
accept queue are to be released. Inside __smc_release() the helper
smc_restore_fallback_changes() restores the changes done to the socket
without to check if the clcsocket has a file set. This can result in
a crash. Fix this by checking the file pointer first.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: f536dffc0b ("net/smc: fix closing of fallback SMC sockets")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two buffers are allocated for each SMC connection. Each buffer is
added to a buffer list after creation. When the second buffer
allocation fails, the first buffer is freed but not deleted from
the list. This might result in crashes when another connection picks
up the freed buffer later and starts to work with it.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 6511aad3f0 ("net/smc: change smc_buf_free function parameters")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dma related ...sync_sg... functions check the link state before the
dma function is actually called. But the check in smc_link_usable()
allows links in ACTIVATING state which are not yet mapped to dma memory.
Under high load it may happen that the sync_sg functions are called for
such a link which results in an debug output like
DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync
DMA memory it has not allocated [device address=0x0000000103370000]
[size=65536 bytes]
To fix that introduce a helper to check for the link state ACTIVE and
use it where appropriate. And move the link state update to ACTIVATING
to the end of smcr_link_init() when most initial setup is done.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: d854fcbfae ("net/smc: add new link state and related helpers")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As smc client the delete link requests are assigned to the flow when
_any_ flow is active. This may break other flows that do not expect
delete link requests during their handling. Fix that by assigning the
request only when an add link flow is active. With that fix the code
for smc client and smc server is the same, so remove the separate
handling.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 9ec6bf19ec ("net/smc: llc_del_link_work and use the LLC flow for delete link")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a new ib device is up smc will send an add link invitation to the
peer if needed. This is currently done with rudimentary flow control.
Under high workload these add link invitations can disturb other llc
flows because they arrive unexpected. Fix this by integrating the
invitations into the normal llc event flow and handle them as a flow.
While at it, check for already assigned requests in the flow before
the new add link request is assigned.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 1f90a05d9f ("net/smc: add smcr_port_add() and smcr_link_up() processing")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be save from unexpected or late llc response messages check if the
arrived message fits to the current flow type and drop out-of-flow
messages. And drop it when there is already a response assigned to
the flow.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: ef79d439cd ("net/smc: process llc responses in tasklet context")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before an smc ib device is used the first time for an smc link it is
lazily initialized. When there are 2 active link groups and a new ib
device is brought online then it might happen that 2 link creations run
in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send
and receive completion queues on the device, but only one set of them
keeps assigned and the other leaks.
Fix that by protecting the setup and cleanup code using a mutex.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: f3c1deddb2 ("net/smc: separate function for link initialization")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For new rdma connections the SMC server assigns the link and sends the
link data in the clc accept message. To match the correct link use not
only the qp_num but also the gid and the mac of the links. If there are
equal qp_nums for different links the wrong link would be chosen.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 0fb0b02bd6 ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a link-down condition we notify the SMC server and expect that the
server will finally trigger the link clear processing on the client
side. This could fail when anything along this notification path goes
wrong. Clear the link as part of SMC client link-down processing to
prevent dangling links.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A delete link could arrive during confirm link processing. Handle this
situation directly in smc_llc_srv_conf_link() rather than using the
logic in smc_llc_wait() to avoid the unexpected message handling there.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Fixes: 1551c95b61 ("net/smc: final part of add link processing as SMC server")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). Fixes
'perf record --switch-output-event event-name' usage.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Some of the most recent, experimental distros are failing, fixes will be
provided, but those gcc/clang versions are not yet in general use and some
are related to linking with libllvm, not the default build.
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0-rc5.tar.xz
# dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
20 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200708 releases/gcc-10.1.0-332-g17327d6cc7, clang version 10.0.0
22 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
25 debian:experimental : FAIL gcc (Debian 9.3.0-15) 9.3.0, clang version 9.0.1-13
26 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
27 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
28 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
29 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
30 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
31 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
32 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
33 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
34 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
35 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
36 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
37 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
38 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
39 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
40 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
41 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
42 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
44 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
45 fedora:rawhide : FAIL gcc (GCC) 10.1.1 20200618 (Red Hat 10.1.1-2), clang version 10.0.0 (Fedora 10.0.0-6.fc33)
46 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
47 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
50 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
51 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
52 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
53 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
54 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
55 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
56 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
58 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
59 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
60 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
61 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
62 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
63 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
70 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
74 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
79 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
80 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
81 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
82 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
83 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
86 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# git log --oneline -1
25d4e7f513 (HEAD -> perf/urgent) tools arch kvm: Sync kvm headers with the kernel sources
# perf -vv
perf version 5.8.rc5.g25d4e7f513d4
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# uname -a
Linux quaco 5.7.8-200.fc32.x86_64 #1 SMP Thu Jul 9 14:34:51 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: x86 rdpmc : Ok
68: Convert perf time to TSC : Ok
69: DWARF unwind : Ok
70: x86 instruction decoder - new instructions : Ok
71: Intel PT packet decoder : Ok
72: x86 bp modify : Ok
73: probe libc's inet_pton & backtrace it with ping : Ok
74: Use vfs_getname probe to get syscall args filenames : Ok
75: Add vfs_getname probe to get syscall args filenames : Ok
76: Check open filename arg using perf trace + vfs_getname: Ok
77: Zstd perf.data compression/decompression : Ok
#
$ git log --oneline -1 ; make -C tools/perf build-test
25d4e7f513 (HEAD -> perf/urgent) tools arch kvm: Sync kvm headers with the kernel sources
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_gtk2_O: make NO_GTK2=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_no_slang_O: make NO_SLANG=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_help_O: make help
make_install_O: make install
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_debug_O: make DEBUG=1
make_no_libperl_O: make NO_LIBPERL=1
make_install_bin_O: make install-bin
make_doc_O: make doc
make_no_libbionic_O: make NO_LIBBIONIC=1
make_tags_O: make tags
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_pure_O: make
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_perf_o_O: make perf.o
make_no_libnuma_O: make NO_LIBNUMA=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_no_libaudit_O: make NO_LIBAUDIT=1
make_cscope_O: make cscope
make_with_libpfm4_O: make LIBPFM4=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_clean_all_O: make clean all
make_no_libpython_O: make NO_LIBPYTHON=1
make_install_prefix_O: make install prefix=/tmp/krava
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_newt_O: make NO_NEWT=1
make_util_map_o_O: make util/map.o
make_no_sdt_O: make NO_SDT=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXxRCDgAKCRCyPKLppCJ+
J9mzAQD2InaZH4Blcx/ChVpe8CVWn31PJP1/dc73Y+9WlVNZ2AD8DLHaUJehe4TJ
EykQqfv1W4ETxxU2FNX9TkdA/7cNLQU=
=hx9+
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
'perf record --switch-output-event event-name' usage"
* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools arch kvm: Sync kvm headers with the kernel sources
perf tools: Sync hashmap.h with libbpf's
libsubcmd: Fix OPT_CALLBACK_SET()
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the
recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to
get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option is
not sufficient, it needs an explicit -fno-stack-protector to shut it
off.
- Mark check_user_regs() noinstr as it is called from noinstr code. The
missing annotation causes it to be placed in the text section which
makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from ASM
code.
-----BEGIN PGP SIGNATURE-----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=QAeH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can be set
back as well. This can lead to timers expiring early. Add a sanity check
to prevent this.
- When a timer is queued with an expiry time beyond the wheel capacity
then it should be queued in the bucket of the last wheel level which is
expiring last. The code adjusts expiry time to the maximum wheel
capacity, which is only correct when the wheel clock is 0. Aside of that
the check whether the delta is larger than wheel capacity does not check
the delta, it checks the expiry value itself. As a result timers can
expire at random.
Fix this by checking the right variable and adjust expiry time so it
becomes base->clock plus capacity which places it into the outmost
bucket in the last wheel level.
-----BEGIN PGP SIGNATURE-----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=aCiv
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer wheel:
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can
be set back as well. This can lead to timers expiring early. Add a
sanity check to prevent this.
- When a timer is queued with an expiry time beyond the wheel
capacity then it should be queued in the bucket of the last wheel
level which is expiring last.
The code adjusted the expiry time to the maximum wheel capacity,
which is only correct when the wheel clock is 0. Aside of that the
check whether the delta is larger than wheel capacity does not
check the delta, it checks the expiry value itself. As a result
timers can expire at random.
Fix this by checking the right variable and adjust expiry time so
it becomes base->clock plus capacity which places it into the
outmost bucket in the last wheel level"
* tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
- Plug a load average accounting race which was introduced with a recent
optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does not
update the rseq CPU id so the id is the stale id of the parent task,
which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load balancer,
which does not decrease imbalance and therefore pulls until the maximum
number of loops is reached, which might be all tasks just created by a
fork bomb.
-----BEGIN PGP SIGNATURE-----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=bCPw
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Plug a load average accounting race which was introduced with a
recent optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does
not update the rseq CPU id so the id is the stale id of the parent
task, which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load
balancer, which does not decrease imbalance and therefore pulls
until the maximum number of loops is reached, which might be all
tasks just created by a fork bomb"
* tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
sched: Fix loadavg accounting race
- Make the handling of the firmware node consistent and do not free the
node after the domain has been created successfully. The core code
stores a pointer to it which can lead to a use after free or double
free.
This used to "work" because the pointer was not stored when the initial
code was written, but at some point later it was required to store
it. Of course nobody noticed that the existing users break that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled. When interrupts are inactive with
the modern hierarchical irqdomain design, the interrupt chips are not
necessarily in a state where affinity changes can be handled. The legacy
irq chip design allowed this because interrupts are immediately fully
initialized at allocation time. X86 has a hacky workaround for this, but
other implementations do not. This cased malfunction on GIC-V3. Instead
of playing whack a mole to find all affected drivers, change the core
code to store the requested affinity setting and then establish it when
the interrupt is allocated, which makes the X86 hack go away.
-----BEGIN PGP SIGNATURE-----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=elM3
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.
Nothing huge in here, just the normal collection of gadget, dwc2/3,
serial, and other minor USB driver fixes and id additions. Full details
are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXxQOrA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk8pgCeO4aQ55WEEjfHvKuOoJC7/bGz5dsAn0o3yfON
LEhiAkNdgpM/DL3/OLu2
=DCX1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master
Pull USB fixes from Greg KH:
"Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.
Nothing huge in here, just the normal collection of gadget, dwc2/3,
serial, and other minor USB driver fixes and id additions. Full
details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: iuu_phoenix: fix memory corruption
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: gadget: udc: atmel: fix uninitialized read in debug printk
usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
usb: dwc2: Fix shutdown callback in platform
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: gadget: fix langid kernel-doc warning in usbstring.c
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
usb: chipidea: core: add wakeup support for extcon
USB: serial: option: add Quectel EG95 LTE modem
thunderbolt: Fix path indices used in USB3 tunnel discovery
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
- ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)
-----BEGIN PGP SIGNATURE-----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=H248
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping into master
Pull dma-mapping fixes from Christoph Hellwig:
"Ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)"
* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: do not allocate pool memory from CMA
dma-pool: make sure atomic pool suits device
dma-pool: introduce dma_guess_pool()
dma-pool: get rid of dma_in_atomic_pool()
dma-direct: provide function to check physical memory area validity
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0")
solved the existing issue with the IUNIT power on code.
So, the driver can now use the right code again.
This reverts commit 95d1f398c4.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because
the mask and shift operations are incorrect. Fix this by shifting
by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking
with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits
to check.
Addresses-Coverity: ("Operands don't affect result")
Fixes: 0f441fd70b ("media: atomisp: simplify the power down/up code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.
This change shuts up lots of warnings when built with W=1:
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24,
from drivers/staging/media/atomisp/pci/atomisp_compat.h:22,
from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_file.c:27:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30,
from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_acc.h:23,
from drivers/staging/media/atomisp/pci/atomisp_acc.c:29:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After removing the unused 32-bits data, the isp2401_system_local.h
now contains everything that it is needed, either by isp2401 or
by isp2400.
So, remove code duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there are two versions of system_global.h headers.
Both share a lot of common code. There are some ISP2401 specific
types on one of the headers, but it doesn't conflict with the
ISP2400 ones.
Also, the common code is identical.
So, remove code duplication by moving such code into a
common header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is an abstraction at the code in order to support
32 or 64 bits address/data length. However, for all
Atom chipsets supported by this version, the size is fixed.
So, cleanup the mess, removing the uused code and placing
the data sizes on a single place.
The end goal is to completely remove those local/global
headers, replacing them by some ISP-version dependent struct,
in order for the driver to decide what version it would need
in runtime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several static vars declared inside the
system local headers. This causes lots of warnings when W=1.
Remove the unused ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If gmin_camera_platform_data() returns NULL then we should return a
negative error instead of success.
Fixes: 90ebe55ab8 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
trace_printk should not be used in production code, replace it
call with pr_info.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the checkpatch.pl warning:
Prefer using '"%s...", __func__' to using '<function name>',
this function's name, in a string
Signed-off-by: Baidyanath Kundu <kundubaidya99@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I'm pretty sure I named this right, but it sounds that I ended
doing something weird maybe while solving some conflict.
So, fix the title of this config var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Queue index is received from the user. Therefore, we must validate it
before using it to access the queue props array.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
One small driver fix. Although the one liner makes it sound like a
cosmetic change, it's a regression fix for the megaraid_sas driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXxMqJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRQJAP48x12h
TuEn5AOCjKC7xI77AyLNbtVerqSBdVRnW/6nxgD9EiBd63CnWa0PZpf2jUEVwWbF
jqj9QjjaZ0CI7nLGOCM=
=fZD+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master
Pull SCSI fix from James Bottomley:
"One small driver fix. Although the one liner makes it sound like a
cosmetic change, it's a regression fix for the megaraid_sas driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro
We currently filter these for timeout_remove/async_cancel/files_update,
but we only should be filtering for fixed file and buffer select. This
also causes a second read of sqe->flags, which isn't needed.
Just check req->flags for the relevant bits. This then allows these
commands to be used in links, for example, like everything else.
Signed-off-by: Daniele Albano <d.albano@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Using SCT on some Tohsiba drives causes firmware hangs.
Disable its use in the drivetemp driver.
- Handle potential buffer overflows in scmi and aspeed-pwm-tacho driver.
- Energy reporting does not work well on all AMD CPUs.
Restrict amd_energy to known working models.
- Enable reading the CPU temperature on NCT6798D using undocumented registers.
- Fix read errors seen if PEC is enabled in adm1275 driver.
- Fix setting the pwm1_enable in emc2103 driver.
-----BEGIN PGP SIGNATURE-----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=tSii
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into master
Pull hwmon fixes from Guenter Roeck:
- Using SCT on some Tohsiba drives causes firmware hangs. Disable its
use in the drivetemp driver.
- Handle potential buffer overflows in scmi and aspeed-pwm-tacho
driver.
- Energy reporting does not work well on all AMD CPUs. Restrict
amd_energy to known working models.
- Enable reading the CPU temperature on NCT6798D using undocumented
registers.
- Fix read errors seen if PEC is enabled in adm1275 driver.
- Fix setting the pwm1_enable in emc2103 driver.
* tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
hwmon: (adm1275) Make sure we are reading enough data for different chips
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
hwmon: (amd_energy) match for supported models
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
I have two fixes:
* 16KiB kernel stacks on rv64, which fixes a lot of crashes.
* Rolling an mmiowb() into the scheduled, which when combined with Will's fix
to the mmiowb()-on-spinlock should fix the PREEMPT issues we've been seeing.
-----BEGIN PGP SIGNATURE-----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=XoUI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- 16KiB kernel stacks on rv64, which fixes a lot of crashes.
- Rolling an mmiowb() into the scheduler, which when combined with
Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT
issues we've been seeing"
* tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
riscv: use 16KB kernel stack on 64-bit
A fix to the VAS code we merged this cycle, to report the proper error code to
userspace for address translation failures. And a selftest update to match.
Another fix for our pkey handling of PROT_EXEC mappings.
A fix for a crash when booting a "secure VM" under an ultravisor with certain
numbers of CPUs.
Thanks to:
Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh
Rajendran, Thiago Jung Bauermann.
-----BEGIN PGP SIGNATURE-----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=eEXz
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
It has been observed that Toshiba DT01ACA family drives have
WRITE FPDMA QUEUED command timeouts and sometimes just freeze until
power-cycled under heavy write loads when their temperature is getting
polled in SCT mode. The SMART mode seems to be fine, though.
Let's make sure we don't use SCT mode for these drives then.
While only the 3 TB model was actually caught exhibiting the problem let's
play safe here to avoid data corruption and extend the ban to the whole
family.
Fixes: 5b46903d8b ("hwmon: Driver for disk and solid state drives with temperature sensors")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fixed no headphone sound bug on laptop Samsung Notebook Pen S
(950SBE-951SBE), by using existing patch in Linus' tree, commit
14425f1f52 (ALSA: hda/realtek: Add quirk for Samsung Notebook).
This laptop uses the same ALC298 but different subsystem id 0x144dc812.
I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c
Signed-off-by: Joonho Wohn <doomsheart@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439 ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 150 bytes.
Before:
text data bss dec hex filename
111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o
After:
text data bss dec hex filename
110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o
After:
(gcc version 9.3.0, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Greg Kroah-Hartman