There are some Arria10 clocks of type "altr,socfpga-a10-perip-clk" that can
have multiple parents. Fix up the __socfpga_periph_init() to call
of_clk_parent_fill() that will return the appropriate number of parents.
Also, update __socfpga_gate_init() to call of_clk_parent_fill() helper
function.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Convert DPLL support code to use clk_hw pointers for reference and bypass
clocks. This allows us to use clk_hw_* APIs for accessing any required
parameters for these clocks, avoiding some locking problems at least with
DPLL enable code; this used clk_get_rate which uses mutex but isn't
good under clk_enable / clk_disable.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch corrects the enable register offset which is actually 0x36cc
instead of 0x36c4
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 5f775498bd ("clk: qcom: Fully support apq8064 global clock control")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
As the code in this file is being executed within irq context in some
cases, we must avoid the clk_get_rate which uses mutex internally.
Switch the code to use clk_hw_get_rate instead which is non-locking.
This fixes an issue where PM runtime will hang the system if enabled
with a serial console before a suspend-resume cycle.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Fixes: a53ad8ef3d ("clk: ti: Convert to clk_hw based provider APIs")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Currently the Exynos5433 (ARMv8 SoC) clock driver depends on ARCH_EXYNOS
so it is built also on ARMv7. This does not bring any kind of benefit.
There won't be a single kernel image for ARMv7 and ARMv8 SoCs (like
multi_v7 for ARMv7).
Instead build clock drivers only for respective SoC's architecture.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
We catch errors in the base clock registration, failure to ioremap
and failures in the final of_clk_add_provider() call.
Also we unmap the registers when we need to rollback.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now report a failing ioremap, failing output names parsing,
failures in table registration and in the final step.
Also there was a bug where clk_register_divider_table() would return
an ERR_PTR value instead of NULL, which we were checking for.
We now implement proper rollback in case of an error.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now catch and report a failing ioremap, also a failure in the final
step of the clock registration is now handled and reported.
Also warnings are turned into errors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We mis-merged the original patch from Russell here and so the
patch went almost all the way, except that we still failed to
probe when there wasn't a clocks property in the DT node. Allow
that case by making a negative value from
of_clk_get_parent_count() into "no parents", like the original
patch did.
Fixes: 7ed88aa2ef ("clk: fix clk-gpio.c with optional clock= DT property")
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add the "intc-ex" clock to the r8a7795 CPG MSSR driver.
According to information from the hardware team the INTC-EX
parent clock is CP. The next data sheet version will include
this information.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Export symbol of_clk_get_from_provider so it can be used in
loadable kernel modules
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Enable the COMPILE_TEST to get build coverage of some of Samsung clock
controller drivers. Still some of them will be built only if
appropriate SoC is chosen (like SOC_EXYNOS4415 or ARCH_S3C64XX).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
We were rolling this ourselves, but clk-divider can do it now.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Our dividers weren't being set successfully because CM_PASSWORD wasn't
included in the register write. It looks easier to just compute the
divider to write ourselves than to update clk-divider for the ability
to OR in some arbitrary bits on write.
Fixes about half of the video modes on my HDMI monitor (everything
except 720x400).
Cc: stable@vger.kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The APB0 clock on A23 is a zero-based divider, not a power-of-two based
divider.
Note that this patch does not apply cleanly to kernels before 4.5-rc1,
which added CLK_OF_DECLARE support to this driver.
Fixes: 57a1fbf284 ("clk: sunxi: Add A23 APB0 divider clock support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwINAAoJEPOmecmc0R2BUgMIAKmXROUpwuap5hhDv+XapDyc
drU3DmOwFQeIiaODZQVFlx8CcXUN6h/8cPZnc4Qd/ChO73TxfvtWY3S7n0n3F/EH
RIceQ30OHTUEYh/k449Sf/sTEOW68h4TdhaVrw2gJYKsJ5fg2ih5o6naWnWWE6Ig
WUh+xeeYdG6L8hCLcUA8sujE3EpG5kJelnWiMBedx6CbuTSSfJcB9tTkg1eOa/R+
jyBgYJJSuSEwG4mJijV61tanZw1FhWu+i4dEAGHkWgimuGekO4CEnRRczZ1hw7x2
O/cBfpLW4D2iGMlrvyUhcB/pe/TmRdz4SfzDSTwLPtpCfqEiZRmxH4mwW4s8hv4=
=igdK
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Introduction of a factor type and a variant containing a gate
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
most of the clock tree structures on i.MX6 Quad Plus are
same as on i.MX6Q. there still some differences between
these two SOCs. compared to the i.XM6Q, the differents of
clocks on i.MX6QP is mainly on:
1. New clock gate added to support the PRE and PRG modules
2. 24MHz OSC clock option added to the UART, IPG, ECSPI, and
CAN clock roots.
3. MMDC channel 1 clock gate is now controllable.
4. clock gating added to the LDB_DIx_IPU clocks on i.MX6QP
5. EMI clock root divider fix
6. other updates fo CSCMRx, CSCDRx and CS2CDR registers.
detailed infomation, please refer to the i.MX6QP RM.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 329cabcecf.
The commit that caused us to specify LE device endianness here,
29bb45f25f (regmap-mmio: Use native endianness for read/write,
2015-10-29), has been reverted in mainline so now when we specify
LE it actively breaks big endian kernels because the byte
swapping in regmap-mmio is incorrect. Let's revert this change
because it will 1) fix the big endian kernels and 2) be redundant
to specify LE because that will become the default soon.
Cc: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
With gdsc driver capable of handling hierarchical power domains,
specify oxili_gdsc as parent of oxilicx_gdsc.
Remove all direct calls to genpd from the mmcc clock driver. The
adding and removing of subdomains is now handled from within
the gdsc driver.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add all gdsc data which are part of mmcc on msm8996 family
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add all data for the GDSCs which are part of msm8996 GCC block
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some gdscs might be controlled via voting registers and might not
really disable when the kernel intends to disable them (due to other
votes keeping them enabled)
Mark these gdscs with a flag for we do not check/wait on a disable
status for these gdscs within the kernel disable callback.
Also at boot, if these GDSCs are found to be ON, we make sure we
vote for them before we inform the genpd framework about their
status. If genpd gets no users, it then disables (removes the vote)
them as part of genpd_poweroff_unused()
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some gdsc power domains can have a gds_hw_controller block inside
to help ensure all slave devices within the power domain are idle
before the gdsc is actually switched off.
This is mainly useful in power domains which host a MMU, in which
case its necessary to make sure there are no outstanding MMU operations
or pending bus transactions before the power domain is turned off.
In gdscs with gds_hw_controller block, its necessary to check the
gds_hw_ctrl status bits instead of the ones in gdscr, to determine
the state of the powerdomain.
While at it, also move away from using jiffies and use ktime APIs
instead for busy looping on status bits.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some qcom SoCs' can have hierarchical power domains. Let the gdsc structs
specify the parents (if any) and the driver add genpd subdomains for them.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that our protection code doesn't use the global name lookup anymore, we
can remove the clkdev registrations.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The current clock registration and protection code has a few drawbacks, the
two main ones being that we create a lot of orphans clock in the
registration phase, which will be troublesome when we will start being less
relaxed about them.
The protection code also relies on clkdev, which we don't really use but
for this particular case.
Fix both at the same time by moving everyone to the CLK_OF_DECLARE that
will probe our clock tree in the right and thus avoid orphans, and by
protecting directly the clock returned by our registration function.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All the data structure that we pass to the clocks setup functions are
declared const, while our setup functions expects a regular pointer. This
was hidden by the fact that we cast a void * pointer back to these
structures, which made it go unnoticed.
Fix the functions prototype.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The clocks registration code in clk-sunxi was most of the time not
returning the struct clk (or struct clk array) that was registered,
preventing the users of such functions to manipulate it, for example to
protect it.
Make them return it so that we can start using it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch add the support to setup the HCLK PLL output
using the "assigned-clock-rates" parameter in the device tree.
If the option is not use, the clock setup by the kickstart
and/or bootloader remain unchanged.
The previous kernel version did not change the clock frequency
output setup by the kickstart and/or bootloader;
this version always setup the clock frequency output to 208MHz.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The Versatile syscon ICST driver OR:s the bits into place but
forgets to mask the previous value, making the code only work
if the register is zero or giving haphazard results. Mask the
19 bits used by the Versatile syscon interface register.
Regression caused and now fixed by yours truly.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Fixes: 179c8fb3c2 ("clk: versatile-icst: convert to use regmap")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The following errors are display in the console during the power-on:
[ 0.000000] lpc32xx_usb_clk_init: failed to register (null) clock: -12
[ 0.000000] lpc32xx_clk_init: failed to register (null) clock: -12
There is no need to register clock "0"; the first clock used is 1;
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: s/prepare/register/]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Before commit b3d192d5121f ("clk: simplify __clk_init_parent()"),
__clk_init_parent() called .get_parent() only for multi-parent
clocks. That commit changed the behavior to call .get_parent()
if available even for single-parent clocks and root clocks.
It turned out a problem because there are some single-parent clocks
that implement .get_parent() callback and return non-zero index.
The SOCFPGA clock is the case; the commit broke the SOCFPGA boards.
To keep the original behavior, invoke .get_parent() only when
num_parents is greater than 1.
Fixes: b3d192d5121f ("clk: simplify __clk_init_parent()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We were not checking the return from devm_add_action() which can fail.
Start using the helper and devm_add_action_or_reset() and return
directly as we know that the cleanup has been done by this helper.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add a helper function devm_add_action_or_reset() which will internally
call devm_add_action(). But if devm_add_action() fails then it will
execute the action mentioned and return the error code.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
As preparation for arm64 based mesongxbb, which pulls in this code once
enabling ARCH_MESON, fix a size_t vs. unsigned int type mismatch.
The loop uses a local unsigned int variable, so adopt that type,
matching the header.
Fixes: 7a29a86943 ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clang found a bug with the __socfpga_pll_init definition:
drivers/clk/socfpga/clk-pll-a10.c:77:15: error: '__section__' attribute only applies to functions and
global variables
This moves the __init annotation to the right place so the function
actually gets discarded.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There are two TI CDCE clock chips in this file. Move them close
together so they're easier to find.
No functional change, just cosmetic.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[sboyd@codeaurora.org: Alphabetize]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk-fixes:
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tegra: Remove improper flags for lock_enable
clk: tegra: Fix divider on VI_I2C
This set contains a bunch of miscellaneous fixes that have accumulated
over the past couple of weeks, primarily for the Tegra210 support added
in v4.5-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=zdPz
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-fixes
Pull tegra fixes from Thierry Reding:
clk: tegra: Fixes for v4.5-rc3
This set contains a bunch of miscellaneous fixes that have accumulated
over the past couple of weeks, primarily for the Tegra210 support added
in v4.5-rc1.
* tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tegra: Remove improper flags for lock_enable
clk: tegra: Fix divider on VI_I2C
Dinh Nguyen